Is there a way to use the find/replace tool to select the actual step in the TestStand sequence instead of just listing matching values in the find window?

The purpose of this is to be able to select many steps that are scattered throughout a sequence so I can change the step type one time. I could do this now, but it would take me 30 minutes to click through the sequence and select all of the steps before I'd even change the step type because there are different steps inbetween the ones I want to select. I wouldn't be able to just use the shift key to select multiple steps because of that. I have about 500 steps I need to select, so it would be worth it to find an automated way to do that.
Unless there's a way to change a step type from a numericlimittest to an action step type from the find/replace window???

I ended up using ActiveX calls in TestStand to find the steps I wanted and change the step type to Action. See attached example sequence.
Attachments:
Convert NumericLimitTest to Action step type example.seq ‏9 KB

Similar Messages

Is there any way to use Quickview from within Spotlight search results?

I'm sure this has been answered previously, but my searches came up empty....
Is there any way to use Quickview from within Spotlight search results? I'd like to be able to do a Spotlight search and hit the space bar for a quick Quickview look before actually launching the program. I'm guessing this isn't possible, but thought I'd ask...

Thanks, Kappy.
Duh...I meant Quick Look. Sorry about that.
In any event, pressing the space bar in Spotlight just puts a space in the Spotlight search box - it doesn't open a Quick view of the highlighted item...

I have the find my ipod app on my ipod and i lost it somewhere in my home. is there a way to use that find my ipod fature from my computer? i was hoping that the loud noise would help me to look for it.

I have the find my ipod app on my ipod and i lost it somewhere in my home. is there a way to use that find my ipod fature from my computer? i was hoping that the loud noise would help me to look for it.

- If you previously turned on FIndMyiPod on the iPod in Settings>iCloud and wifi is on and connected go to iCloud: Find My iPhone, sign in and go to FIndMyiPhone
- You can also have to iPod play a sound via iCloud.

My iPhone 4S is passcode locked. Is there a way to use Find My iPhone to remotely change the Passcode Lock number?

My iPhone 4S is passcode locked. Is there a way to use Find My iPhone to remotely change the Passcode Lock number?
Thanks for any advice.

You cannot remotely undo a remote lock nor remotely unlock it.

I'm using a Mac. I "upgraded" to LR5 from LR4. I do not want to be a member of the "Creative Cloud". I just want to use the software I purchased, specifically to upload to my SmugMug account. Is there a way to use an add-on to do this? Aperture and L

I'm using a Mac. I "upgraded" to LR5 from LR4. I do not want to be a member of the "Creative Cloud". I just want to use the software I purchased, specifically to upload to my SmugMug account. Is there a way to use an add-on to do this? Aperture and LR4 were easy but I'm finding it impossible without subscribing to CC.

Sorry, maybe I don't understand, but why do you feel compelled to subscribe to CC if you already have a permanent Lightroom 5 licence?
For the SmugMug plugin, a simple Google search ("smugmug lightroom plugin") gives this link to download the plugin: http://help.smugmug.com/customer/portal/articles/121321
Another way is to click the button "Find more services online..." in the the Publish Service section of Lightroom, and to search for SmugMug in the Adobe Add-ons portal; you will find a link to the latest plugin: https://creative.adobe.com/addons/products/1755

Is there a way to use proper mainland chinese characters on an ipad instead of the apple variants?

I have been learning Chinese at University, and I bought an iPad to help my studies and I have found that Apple for the international keyboard has variants for many different chinese characters. Why is this and is there a way to use the chinese characters that 1.6 billn people use rather than the Apple variants? Will Apple be addressing this at all?

No, The simple and traditional are fine, but when typing in simplified there choices for say, 将 or 骨 are different from both Simplified and Traditional entirely. If I had copied Apple's characters in tests I would have lost grades. I've never seen it happen on another operating system and unfortunatley Microsoft beats Apple in this field; hence why I call them Apple variants. I'm not the only one who has see this problem. The only way to get what I would call authentic chinese characters is with the method that is stated above. I found this solution in the thread titled "Chinese characters misrepresented". There are screen shots there too. I would love to find out how/why Apple chose this system for chinese.

Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11?

Is there a way to use the common J-K-L keystrokes to play forward and backward in iMovie '11? Most editing apps--like Final Cut Pro, QuickTime Pro, Avid, etc.--use this convention. I find not having it slows editing down considerably? I don't see it listed in keyboard shortcuts; is there any way to add it? Thanks!

I don't think so. If you click iMovie/Help, you will see a list of all keyboard shortcuts.
Here they are.
Get information
Open iMovie Help
Command-Shift-Question Mark (?)
Open the Project Properties window
Command-J
Open the Project Theme window
Command-Shift-J
Show playhead info
Shows date, time, and keywords for video frames above the playhead.
Command-Y
Import and export
Import from camera
Command-I
Export movie
Command-E
Play video
Play video beginning from the frame beneath the pointer
Space bar
Play 1 second of video total—0.5 seconds before the pointer and 0.5 seconds after
Plays only 0.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Left Bracket ([)
Play three seconds of video total—1.5 seconds before the pointer and 1.5 seconds after
Plays only 1.5 seconds of video from the beginning of the selection or to the end of the selection if the pointer is resting within the selection border.
Right Bracket (])
Play selection
Slash (/)
Play selected event or project from the beginning
Backslash (\)
In the Event browser, speed up playback from 1x to 2x to 4x by pressing the key one time or two times, respectively
Right Arrow key
In the Event browser, slow down playback from 4x to 2x to 1x by pressing the key one time or two times, respectively
This action works only if you’ve already sped up the playback.
Left Arrow key
When playing Event video, jump forward 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Down Arrow key
When playing Event video, jump back 3 seconds (6 seconds when playing at 2x speed or 12 seconds when playing at 4x speed)
Shift-Up Arrow key
When playing Event video, jump forward to the next clip
Down Arrow key
When playing Event video, jump to the beginning of the current clip, or jump to the previous clip if the playhead is near the beginning of the current clip
Up Arrow key
Play the selected Event or project full screen
Command-G
Exit full-screen mode
Escape (Esc) key
Move the playhead by one frame
Left Arrow key or Right Arrow key
Freeze the playhead
Hold down Control key
When skimming, keep the cursor in the middle of the row
Option-Shift
Manage projects and events
Create new project
Command-N
Move to Trash
Moves the selected project (in the Project Library), Event (in the Event Library), or Event clip (in the Event browser) to the Trash. If only part of an Event clip is selected, the entire clip is moved to the Trash.
Command-Delete key
Open iMovie preferences
Command-Comma (,)
Page setup
Command-Shift-P
Print selected Event or project filmstrips
Command-P
Select and edit video
Select an entire project or Event clip when a partial clip is selected, or select all project or Event clips when an entire clip is selected
Command-A
Select to playhead
Expands or contracts the selection from the nearest selection border to the playhead.
Shift-A
Deselect all clips
Command-Shift-A
Add selected frames to project
E
Split a clip on both ends of a selection (longer than five frames), or at the playhead position if nothing is selected
Command-Shift-S
Cut selected frames
Command-X
Copy selected frames
Command-C
Paste selected frames
Command-V
Paste all adjustments
Command-Shift-V
Paste video adjustments
Command-Option-I
Paste audio adjustments
Command-Option-A
Paste crop adjustments
Command-Option-R
Paste cutaway, green-screen, or picture-in-picture adjustments
Pastes adjustments, depending on which type of video is selected.
Command-Option-U
Paste video effect

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network?

My home network has an Airport Extreme w/Time Capsule as the base and then an Airport Express and a second Airport Extreme to reach different areas of the house. Is there a way to use the second Airport Extreme for file storage on this network? Network is administered through an iMac running OS X Yosemite 10.10.2. Ideally, would like for the second Airport Extreme hard drive to appear on the list of devices in the Finder window.

Ok.. gottcha
The problem is network wise.. Yosemite is about equal to tin cans and string.. pathetic.
Here is my usual set of instructions to get anything working on Yosemite.
The best way to fix problems is a full factory reset of all the AE in the network.
Factory reset universal
Power off the AE.. ie pull the power cord or power off at the wall.. wait 10sec.. hold in the reset button.. be gentle.. power on again still holding in reset.. and keep holding it in for another 10sec. You may need some help as it is hard to both hold in reset and apply power. It will show success by rapidly blinking the front led. Release the reset.. and wait a couple of min for the AE to reset and come back with factory settings. If the front LED doesn’t blink rapidly you missed it and simply try again. The reset is fairly fragile in these.. press it so you feel it just click and no more.. I have seen people bend the lever or even break it. I use a toothpick as tool.
Then redo the setup from the computer with Yosemite.
1. Use very short names.. NOT APPLE RECOMMENDED names. No spaces and pure alphanumerics.
eg AEgen5 and AEwifi for basestation and wireless respectively.
Even better if the issue is more wireless use AE24ghz and AE5ghz with fixed channels as this also seems to help stop the nonsense.
2. Use all passwords that also comply but can be a bit longer. ie 8-20 characters mixed case and numbers.. no non-alphanumerics.
3. Ensure the AE always takes the same IP address.. this is not a problem for AE which is router.. it is a problem for AE which is bridged.. you will need to set static IP in the main router by dhcp reservations or use static IP in the AE which is tricky.
4. Check your share name on the computer is not changing.. make sure it also complies with the above.. short no spaces and pure alphanumeric..
5. Make sure IPv6 is set to link-local only in the computer. For example wireless open the network preferences, wireless and advanced / TCP/IP.. and fix the IPv6. to link-local only.
6. Now mount the disk of the second AE in finder... manually.
Use Go, Connect to Server and type in the AE ip address.
SMB://10.0.1.2
Where you will replace that address with the actual address. The network resource should be discovered and then it will request the password.. type that in and make sure you tick to save it in your keychain.
There is a lot more jiggery pokery you can try but the above is a good start.. if you find it still unreliable.. don't be surprised.
Do as much as you want of the above... not all of it is necessary.. only if you want it reliable.. or as reliable as Yosemite in its current incarnation can manage.
The most important thing is point 6.. mount the disk using direct IP address and not names.. dns in Yosemite is fatally flawed.
See http://arstechnica.com/apple/2015/01/why-dns-in-os-x-10-10-is-broken-and-what-yo u-can-do-to-fix-it/

Is there any way to use video with the new Flash CC HTML5 Canvas?

I am a long time Flash user trying to determine if this new version of the program is something to add to the workflow again (after the last several years of not being able to use it) and the tutorials I have seen are not well written. Is there a way to use a video file within the animation, like with the AS2 and AS3 versions of Flash where I could insert a video clip into a symbol and animate the symbol while the video played.
What I need to know is what format of video file I should use and how to add it into the timeline since Flash does not seem to be allowing for any type of import for this.
Any Thoughts?
Thanks,
Brett

Ok, so there are limitations, are they written down somewhere? I have been looking for a list of do and do not functions and the ways to work around them. Are they in the documentation somewhere I haven't discovered?
Right now all I am looking to do is create Classic Tweens that animate movement and opacity so I can create a presentation with video that includes these elements. Is that level of functionality available in the HTML5 Canvas, or is that still on the drawing board?
Is there a specific name for what I am looking to do that would aid my search? HTML5 video is not enough since the answer has not been forthcoming in Google or on Adobe or Stack Overflow. I am starting to think that nobody has thought of this yet, or if they have they decided that it is not currently possible and skipped the part where the rest of us find out.
Any thoughts on making the connection to either doing this or finding out that it is just not possible yet would be very helpful.

Is there any way to use RUN button to deploy the application and open IE...

Hi
Thank you for reading my post
i used to use Run button to compile / deploy and run (opening the browser to project context path) .
i want to know is there any way to use RUN button to deploy an application to standalone OC4J and opening browser?
I know that we can define ear or war deployment profiles and use them to deploy the application to stand alone server , but i want a single click solution.
thanks

Hello,
Try disabling graphics hardware acceleration. Since this feature was added to Firefox, it has gradually improved, but there still are a few glitches.
You might need to restart Firefox in order for this to take effect, so save all work first (e.g., mail you are composing, online documents you're editing, etc.).
Then perform these steps:
*Click the orange Firefox button at the top left, then select the "Options" button, or, if there is no Firefox button at the top, go to Tools > Options.
*In the Firefox options window click the ''Advanced'' tab, then select "General".
*In the settings list, you should find the ''Use hardware acceleration when available'' checkbox. Uncheck this checkbox.
*Now, restart Firefox and see if the problems persist.
Additionally, please check for updates for your graphics driver by following the steps mentioned in the following Knowledge base articles:
* [[Troubleshoot extensions, themes and hardware acceleration issues to solve common Firefox problems]]
* [[Upgrade your graphics drivers to use hardware acceleration and WebGL]]
Did this fix your problems? Please report back to us!
Thank you.

Is there a way to use the Unicode Miscellaneous Symbols in Photoshop CS3?

Hi,
Is there a way to use the Unicode Miscellaneous Symbols, a list of which can be found here: http://en.wikipedia.org/wiki/Miscellaneous_Symbols in photoshop CS3?
I've enabled unicode on my keyboard; and I can make the symbols if I type them in Textedit. But, if I try to copy and paste them into Photoshop it doesn't work.
Is there a way to access these symbols in Photoshop? They aren't in the Symbol, Wingdings, or Zapf Dingbats fonts.

Hi Chris,
Thank you very much for the message.
With unicode enabled and the character palette open, I have to change View from Glyph to Code Tables in order to find the characters I need. (What I need isn't available in the glyph view as far as I can see). Then I scroll down to the unicode series beginning 00002600 Miscellaneous Symbols. I tried copying and pasting a character from here into photoshop, but it didn't work.
Unfortunately, I don't see the symbols I need in the glyph view. Is there a way to copy and paste from the code tables view? If you have any suggestions, please let me know.
Thank you.
-Laxmidi

Is there a way of using remoteupdatemanager to install the Digital Publishing suite to Adobe inDesign?

Is there a way of using remoteupdatemanager to install the Digital Publishing suite to Adobe inDesign, if not how do I install it to Macs running Adobe CC 2014? I need to do this remotely and silently using ARD to over 100 Macs.

It's alo what mine looks like as well because I've not added anything At first I didn't know and no one would tell me. Then I just go used Tools menu. It far more complex to learn if you go to it Cold Turkey from using Menu bars which are vastly easier. It’s a shock to your system. But you learn to use tools menu evn though it takes far more time. You waste time clicking heading to find sub topics and sometimes items that should be grouped together are spread all over. But, Hey Change is supposed to be good whether we want it or not.

"There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card?

"There is no SIM card installed in the iPhone you are attempting to activate" I do not wish to use as iPhone anymore, just an iPod is there a way to use again without inserting a sim card? There is a hardware fault but this is confined to the internal sim card receivers and purely the parts related to the sim card there are no other hardware faults! I've tried dfu mode and a restore and cant find anything related to this anywhere on the internet, thanks for any help in advance, Bobby

iPhones require a SIM card, that card does not need to be active.

My MacBook Air does not have an optical drive. I have a program (Megastar V) which is installed using a CD. Is there a way to use the optical drive on my PC laptop to install this program on my MacBook Air?

MacBook Air does not have an optical drive. There is a program I wish to install on my Air which is an astronomy application called Megastar V. Installation requires the use of a CD. Is there a way to use the optical drive on my PC (toshiba laptop using Windows 7) to install this program onto my Air?
With gratitude,
Otto

Thank you for explaining to me how to do this. I will try it tomorrow and let all of you know how it goes.
Otto

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini

Is there a way to use the iMac's display mode with a Mac mini with out logging in first on the Mac mini (late2014)
im currently useing my Mac mini as a portable computer, I take it to the university and use the iMacs there as a monitor but before I can do that I have to log in to my Mac mini first which means doing it blind
is there a way to put the IMacs into display mode with out logging into my Mac mini first
or is there a portable monitor that I can use that will not require me to login first

This
Target Display Mode: Frequently Asked Questions (FAQ) - Apple Support
says:
How do I enable TDM?
Make sure both computers are turned on and awake.
Connect a male-to-male Mini DisplayPort or ThunderBolt cable to each computer.
Press Command-F2 on the keyboard of the iMac being used as a display to enable TDM.
Note: In Keyboard System Preferences, if the checkbox is enabled for "Use all F1, F2, etc. keys as standard functions keys," the key combination changes to Command-Fn-F2.
How do I exit TDM?
To leave TDM, press Command-F2 on the keyboard of the iMac that is in TDM. You can also exit TDM if you shutdown or sleep either computer or detach the cable.
Can I use a third-party keyboard or older Apple keyboard to enable TDM?
Some older Apple keyboards and keyboards not made by Apple may not allow Command-F2 to toggle display modes. You should use an aluminum wired or wireless Apple keyboard to toggle TDM on and

Is there a way to use the find/replace tool to select the actual step in the TestStand sequence instead of just listing matching values in the find window?

Similar Messages

Maybe you are looking for