Is there anyway the latest firmware could have enabled my restriction passcode as I have never enabled it myself this has happened to my ipad2 and new iPod 4 g

Is there anyway the latest firmware could have enabled my restriction pass code this has happened to my ipad2 and new iPod 4g,I have not set these codes but I ALLWAYS use the same 4digit numbers and when I enter these I tells me I have made 4 attempts,what is the correct way to resolve this,does it mean a reset or restore,wonder if this has been a problem with other users as I mentioned I have never set these codes because I have no need to as I am the only user on my iPad and iPod.

I have seen other users report this very same issue after an update. Unfortunately, if you don't have the passcode to unlock restrictions, you have to restore the device as new in order to gain access again. If you restore from a backup - the passcode will still be in that backup and you will end up right where you started.
But in your case, you were not using a passcode, so I am hoping that you have a backup that predates the backup from when you updated the device. If you have multiple backups, you can restore from an older backup that should not contain that passcode and then you should be OK.
Do you backup with iTunes? If you do - go to Edit>Preferences>Devices and see if there is any older backup in that window - other than the one from when you updated the iPad iOS.
Have you restarted or reset the iPad since you updated? It's worth a shot to try. I don't think it will change this situation, but they are both easy and harmless to do.
Restart the iPad by holding down on the sleep button until the red slider appears and then slide to shut off. To power up hold the sleep button until the Apple logo appears and let go of the button.
Reset the iPad by holding down on the sleep and home buttons at the same time for about 10-15 seconds until the Apple Logo appears - ignore the red slider - let go of the buttons.

Similar Messages

I cannot access any songs on my iPod classic. I had around 20,000 songs on it and it now says I have 12,00o but can't access them. Any idea why this has happened?

I cannot plug it into iTunes and reload as my MacBook crashed a few days ago and I had to get a new hard drive. Recovery software is unable to retrieve anything from the hard drive.
All the songs were from CDs so not saved in iTunes.
The iPod was last plugged into the MacBook one day before it crashed and it was Ok when I ejected it.
Could it be anything to do with this? Doesn't an iPod have its own memory? Any ideas why it has happened and if their is anyway of retrieving it? Is it best to just take it into an apple shop? I am no longer covered with apple support.
Thanks.

When I hover over cover flow it says I have 12851 songs but when I click nothing happens.
When I hover over artists or albums it says 'no artists/albums'.
I can upload again from my CDs but just wondering if there is anything to do. I live abroad so all my CDs are in storage.

I continually get the Update message and when I click it runs and never completes update. This has happened everytime I log in.

Whenever I log in on my computer, I get a Firefox Update message and when I click on it it continually runs for hours and never completes the update.

If you have problems with updating or with the permissions then easiest is to download the full version and trash the currently installed version to do a clean install of the new version.
Download a new copy of the Firefox program and save the DMG file to the desktop
* Firefox 4.0.x: http://www.mozilla.com/en-US/firefox/all.html
* Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
* Trash the current Firefox application to do a clean (re-)install
* Install the new version that you have downloaded
Your profile data is stored elsewhere in the [http://kb.mozillazine.org/Profile_folder_-_Firefox Firefox Profile Folder], so you won't lose your bookmarks and other personal data.

My ipod screen has a white screen i have tried plugging it in to itunes and pressing the home button and top button together but it wont turn on! this has happened before, i should have never bought one what should i do?

my ipod screen has went white i have tried plugging it into itunes and pressing the home button and top button together for 10 seconds but it wont work!! this has happened twice before already and i havent even had it a year yet, i should have listened to my sister and never have bought one!!! someone help please ?

- Connect to computer and it it shows in iTune restore via iTunes
- Then try letting the battery fully drain. After charging for an hour try the reset (both buttons) and connecting to computer and restore.

I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via bluetooth whenever I try even though both shows that the devices are discoverable. I need help!

I have an Ipad and an Ipod Touch 5th gen both on the latest firmwares but they won't connect via Bluetooth whenever I try even though both shows that the devices are discoverable. I also tried connecting them with my Bluetooth enabled laptop but it also didn't worked. Because of the Bluetooth not working I also can't enable airdrop.

What model iPad?
What model computer and OS version>
AirDrop requires:
What you need
To share content with AirDrop, both people need one of these devices using iOS 7 or later, or a Mac with OS X Yosemite:
iPhone 5 or later
iPad (4th generation or later)
iPad mini
iPod touch (5th generation)
You also need to turn on Wi-Fi and Bluetooth. If you want to share with your contacts, sign in to your iCloud account.
Learn more about using AirDrop to share with people using a Mac with Yosemite.
Use AirDrop to wirelessly share content - Apple Support
System Requirements
To see if your Mac works with AirDrop, make sure you’re in the Finder by clicking the desktop (the background area of your screen), or by clicking the Finder icon in the Dock. Then, check to see if AirDrop is listed as an option in the Go menu. If you don't see AirDrop listed, your Mac doesn't support this feature.
In order to transfer files between a Mac and and an iPhone, iPad or iPod touch
your iOS device needs to include a lightning connector
your iOS device needs iOS 7 or later installed
your Mac needs to be a 2012 or later model with OS X Yosemite installed
Your Mac and iOS device both need bluetooth and Wi-Fi turned on. You do not have to be connected to a specific Wi-Fi network.
To transfer files between two Mac computers, you need the Mac models listed below with Wi-Fi turned on and OS X Lion or later installed.
MacBook Pro (Late 2008 or newer)*
MacBook Air (Late 2010 or newer)
MacBook (Late 2008 or newer)*
iMac (Early 2009 or newer)
Mac Mini (Mid 2010 or newer)
Mac Pro (Early 2009 with AirPort Extreme card, or Mid 2010)
*The MacBook Pro (17-Inch Late 2008) and the white MacBook (Late 2008) do not support AirDrop.
For help identifying your Mac, choose About This Mac from the Apple menu. You can refer to the Apple Support website to find out if your iPhone, iPad or iPod Touch includes a lightning connector.
Mac Basics: AirDrop lets you send files from your Mac to nearby Macs and iOS devices - Apple Support
Otherwise you need an app to pair via BT one iOS device to another iOS device. There may be apps that allow pairing with a Mac computer. The iOS devioces do not have the BT profiles necessary natively to pair with a computer or another iOS device except for AirDrop

Nokia 6300 says I have the latest firmware, nokia....

There is a new firmware out for my Nokia 6300, but the phone says it have the latest firmware, when I check via the "telephone updates" in the settings. I want the latest! I dont have a cable, or Bluetooth on my pc. I have it on my Mac. Is it possible to update via my Mac with BT?

Updates are not possible by bluetooth, and currently not possible using a mac.

I have the latest firmware... still having problems waking from sleep

First off, I want to say that I have the latest firmware updates and have had them for a few months: SMC version 1.4f12 and Boot ROM version MB11.0061.B03.
The problem I have most often when trying to wake is that the password dialog will come up, I'll enter my password, and then the MacBook will just go back to sleep! Sometimes the screen unlocks for a few seconds and then it goes back to sleep completely (i.e. backlight goes off), and sometimes the password dialog just goes away and I get the spinning beachball on a black screen indefinitely.
Is anyone else having this problem? Is there a fix? Am I NOT actually running the latest firmware?

Try resetting the SMC (I would also repair permissions before and after - in disk utility)
http://docs.info.apple.com/article.html?artnum=303319
Hope this helps,
Cheers

Do The New Nokia N97's Have The Latest Firmware Ru...

Do the new nokia n97's have the latest firmware running on them (V20) or do i have to upgrade it after it arrives?
Solved!
Go to Solution.

That depends how long it has been since the phone left the factory? It is possible that some retailers have a stock that is very big, so that the phones that they sell right now have a firmware that is a few months old...
Where are you planning buying the phone?
By clicking the "Kudos!" or the "Solution?" button on the right you can say "Thank You" and you´ll show the author and others that the post is useful.
The day we stop improving is the day we stop being good.

Previous version had save all tabs before shutting down,which helped a lot if u open same windows always,but this is not there in the latest version I have upgraded recently.Request you to guide me if this can be accommodated in the new version.

Previous version had save all tabs before shutting down,which helped a lot if u open same windows always,but this is not there in the latest version I have upgraded recently.Request you to guide me if this can be accommodated in the new version.

Firefox now always stores the old session which you can access by going to the History menu and selecting "Restore Previous Session".
If you always open the last set of tabs, an alternative approach is this:
# Click the orange Firefox button, then select options to open the options window
# Go to the General panel
# Change the setting "When Firefox starts" to "Show my windows and tabs from last time"

I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.

I just sold my iPhone 4s after doing a reset and deleting data and settings. Is there anyway the buyer can see any of my old photos, texts, or data? I have confidential info for work and family photos and freaked out that they can be found somehow.

No, but if the answer was yes it's a little late to start getting freaked out about it.

Zen XTRA is completely dead after installing the latest firmware 2.10

Hello,?I have tried to install the latest firmware 2.0.03 to my Zen Xtra 60GB mp3 player. The installation process completed about 70%. As I understand, at that point the?new firmware was finally uploaded after a couple of player reboots. The?firmware installer was waiting with a message "Waiting for the player to reboot", and the player rebooted. But the firmware installer was waiting, and waiting... and after an hour I looked at the player and saw that it was not starting up at all. I removed the USB cable, stopped the firmware upgrade process and tried to reboot the player with reset; then I tried to access the recovery menu as described in the FAQ?- but no success. The player shows completely no response to any button presses, the LCD does not even flicker, the hard dri've does not power up - I don't hear it. Nothing happens, even if pressing the play/reset switch for fi've minutes. What's could be the matter? And more importantly, how can I get it working back again? I fear that the warranty has expired by now. Can anyone suggest what to do?I would be grateful for any ideas.

It is puzzling how some people including myself can upgrade thier firmware on thier devices and experience no problems at all during the procedure. Then theres others like yourself who would experience catastrophic events.
Since we all downloaded the firmware from the same place, and?alot of us didn't have any problems, it is?at least safe to say that there isn't anything?wrong?with the new firmware. Or else we'd all problems.
So for these devices that are failing, there must have been already a serious problem with them before the upgrade even started. The symptons just went unnoticed through every day normal use. And are only manifested through a reload/upgrade of firmware. Or something happened on the computer itself, during the transfer of data; auto file scanning virus protection comes to mind, or other programs or services running in the background that were taking up resources needed to make the upgrade go smoothly,?a USB cable with a short in it or a bad USB port. Who knows?!
If the player doesn't even start?up in?rescue mode then theres really nothing as a consumer you can do to fix it. You'd have to just see about getting it repaired, or replace it. I know yours is a 60GB, but?I gotta tell you the new 30GB Zen Vision M is a sweet deal!

HT1444 How can I upgrade my system 10.4 into a newer one or the latest I could get for my machine?

I currently have Mac OS X V. 10.4.11 and there are some things I'm unable to use on my computer, Adobe flash player being one of them, so I figured why not upgrading my software into the latest I could get? However I have no clue how can this be done, or if it can be done?
I'll appreciate any advice. Thank you.

OS numbers and names
OS X 10.4.x - Tiger
OS X 10.5.x - Leopard
OS X 10.6.x - Snow Leopard
OS X 10.7.x - Lion
OS X 10.8.x - Mountain Lion
More about Macs
The Apple History site has specifications for every Mac ever produced: http://www.apple-history.com/
Upgrade to Leopard
Those wishing to upgrade to Leopard should be aware that install disks can be expensive unless you contact Apple. Details: http://lowendmac.com/deals/best-os-x-leopard-prices.html Standard Leopard installers impose several hardware limitations including speed and RAM size but all these restrictions can be overcome. Google for details. Leopard works well at 500 MHz with 1 GB of RAM and many happy users have less than this.
Upgrade beyond Leopard
OSs beyond OS X 10.5.8 require an Intel processor. If in doubt check this: Click the apple at the top left of your screen and select 'About this Mac'. This will give you your OS number. Then click 'More Info' to see which processor you have. If it says PowerPC you cannot upgrade to Snow Leopard and above. If you have an Intel Mac it is well worth upgrading to Snow Leopard now and then considering other options after that. You can buy Snow Leopard here: http://store.apple.com/us/product/MC573Z/A
Upgrade beyond Snow Leopard
Information about upgrading Snow Leopard to Lion or Mountain Lion: http://store.apple.com/us/product/MD256Z/A
Important
Check that your Mac complies with any requirements. If you are not in the US you should use the Change Country link at the bottom of Apple pages.

Im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

im using an iphone 4s with the latest firmware which is 6.1.3 but my wifi button keeps going grey how can i fix it? i rested network connections and it worked for a while and went grey again,what can i do?

Have you worked through the Troubleshooting iOS and WiFi knowledge base article? If not, see if there is info in there that might help.
Is the WiFi greyed out on all WiFi networks or just the one? If it does this on all then there may be a hardwaer problem that needs attention from the techs at an Apple store genius bar.
Before that, however, try a reboot by holding both the power and home buttons until the apple logo appears and it restarts, ignoring the red slider if it appears. That clears a lot of iOS hang ups that occur.

What is the latest firmware & version of SANtricity for my FlexLine 280's?

We have a pair of FlexLine 280's. They are at firmware 6.12. We use SANtricity 9.19.G2.04 to manage them.
I have been doing some research and know there is firmware levels 6.19, 6.60, and 7.x out there. Although, I'm not sure if there is a 7.x for the FLX280's.
I also know there are newer version of SANtricity, 9.19.G2.06 and a 10.10 version. But again, I'm not sure if 10.10 is compatible with the FLX280's.
So, can somebody help me out? What is the latest firmware for my FLX280's? What is the latest version of SANtricity I can use?
Also, am I entitled to free SANtricity upgrades? I am under a maintenance contract. Or is that something I would have to purchase?
Thanks for any help,
Nathan

NNellans wrote:
We have a pair of FlexLine 280's. They are at firmware 6.12. We use SANtricity 9.19.G2.04 to manage them.
I have been doing some research and know there is firmware levels 6.19, 6.60, and 7.x out there. Although, I'm not sure if there is a 7.x for the FLX280's.
The f/w 7.x isn't supported for the FLX280. The latest f/w is 6.60.xx.xx and there will be not 7.x f/w for the FLX280. In other words, the 6.60.xx.xx is the latest f/w we'll have for the FLX280.
I also know there are newer version of SANtricity, 9.19.G2.06 and a 10.10 version. But again, I'm not sure if 10.10 is compatible with the FLX280's.
So, can somebody help me out? What is the latest firmware for my FLX280's? What is the latest version of SANtricity I can use?AFAIK, the latest f/w is 06.60.11.20.
As for Santricity I cannot answer.
Also, am I entitled to free SANtricity upgrades? I am under a maintenance contract. Or is that something I would have to purchase?You need to contact your Sun support representative to validate this.
Regards

What is the latest firmware version for STA1520 Tuning Adapter?

I have several customers experiencing random reboots of their tuning adapters (STA1520). They are running firmware version 1402 and I have heard that there is a newer version of firmware that resolves this issue. What is the latest firmware version? Does it resolve this issue?

1501 Solves the reboot problem

Is there anyway the latest firmware could have enabled my restriction passcode as I have never enabled it myself this has happened to my ipad2 and new iPod 4 g

Similar Messages

Maybe you are looking for