Is this user an administrator?

I am in Boot Camp Public Beta, and I start reading "Running OS X on a PC?" (http://discussions.apple.com/thread.jspa?threadID=473608&tstart=0), which basically says this guy is sayign that Boot Camp should be released for Windows, only it has the Mac OS X system with it. Then, James Bond 007 says
"Sorry, but speculation about Apple products is not allowed." I think, Is this guy for real? He is not registered as an apple employee nor a host. If he is an employee or a host, it should be clearly marked. I think anyone moderating this forum should clearly be marked as employee, moderator, or host..

James Bond is a respected L4 helper here.
He is not an apple employee or moderator.
If he was, he would have a special Apple avatar next to his name.
All Apple employees & moderators have very specific avatars
which will readily make this known to the reader.
James was reminding you about the Terms of Use,
which specifically warns against any speculation.
He did you a favor.

Similar Messages

  • Once we download it brings up a box that says "Run as" and has User name: Administrator and a box for Password. We can't get past this point. What do we do?

    we tried to dowload Firefox and it tried to run..it then brought up the box that states Run as at the top. It says: You may not have the necessary permissions to use all the features of this program you are about to run. You may run this program as a different user ot continue to run the program as the current user.
    Current user(Owner-PC\Owner)
    Run the program as the following user:
    User name: Administrator
    Password:
    ok cancel

    Make sure that you do not run the Firefox directly via the download dialog in IE, but save the file to the desktop and start the installation with a double-click.
    You may need to use "Run as Administrator" via the right-click context menu if you do not get a UAC alert.

  • Another user of your computer is currently using this connection. This user must disconnect before you can log on.

    Hello
    I have a single computer that is going to be shared between 5 people. In an effort to save time. I wanted the users to have a single shared LOCAL login to the computer.
    Then each user could pull up an RDS session through RDWEB on our 2012 r2 RDS farm.
    However, when I attempt to log in more than one user through RDWEB I receive:
    Another user of your computer is currently using this connection. This user must disconnect before you can log on.
    I have done some research on this, and followed this advice, and did the following steps on all my RDS session host and broker servers
    Enable Multiple RDP Sessions
       -  Log into the server using Remote Desktop.
       - Open the start screen (press the Windows key) and type gpedit.msc and open it
       - Go to Computer Configuration > Administrative Templates > Windows Components > Remote Desktop Services > Remote Desktop Session Host > Connections.
       - Set Restrict Remote Desktop Services user to a single Remote Desktop Services session to Disabled.
       - Double click Limit number of connections and set the RD Maximum Connections allowed to 999999.
    However, it did not solve the problem. Anyone have suggestions?

    Hi Michael,
    In addition you can try below registry setting for multiple remote session.
    HKEY_Local_Machine\SYSTEM\CurrentControlSet\Control\Terminal Server
    fSingleSessionPerUser     REG_DWORD     0x00000000
    Note: By default the registry value is set to 1, but you need to change to 0.
    Also if you are making connection through gateway then recheck whether the setting is enabled on gateway side for multiple session.
    Hope it helps!
    Thanks.
    Dharmesh Solanki
    Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Support, contact [email protected]

  • No portal roles are assigned for this user.If this problem persists, contac

    I am trying to access portal first time using j2ee_admin user. It is saying "No portal roles are assigned for this user.If this problem persists, contact your system administrator."
    iam using abap+java enginee how config in abap enginne ,iwant which role to assign  j2ee_admin  user
    i already asiigned sap_j2ee_admin,SAP_BC_JSF_COMMUNICATION,SAP_BC_JSF_COMMUNICATION_RO   but it show same problem
    please help me..
    Edited by: Mugala Balu on Aug 7, 2010 5:53 PM
    Edited by: Mugala Balu on Aug 8, 2010 7:48 AM

    Balu,
    Well this issue has been discussed many a times in forums. You would have to point your data source to ABAP system.
    Check this thread in [here|J2EE Failed to start  , after changing UME datasource;.
    Good Luck!
    Sandeep Tudumu

  • Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up

    Photoshop Elements 11 installed on Mac Mini OS X 10.9.5. Application running successfully on bot main user and administrative accounts for considerable time with no warning messages. When established a new user account on same computer and try to call up elements receive message “Some ot the application components are missing from the Application directory. Please reinstall the application.” How do I correct this problem without disturbing application in main user account?

    Brooks lansing if you create a new Administrator account does the same issue occur?  If so then it is likely that there is a file permission failure and file permissions have been set for the existing Users instead of the groups they belong to.
    Have you removed and reinstalled Photoshop Elements 11?  This may reset the file permissions to the correct state to allow it to work under new accounts.

  • Same user with administrative rights on all the servers in single domain versus domainadmin as a part of administrator group in all the servers

    same user with administrative rights on all the servers in single domain user as a part of administrator group in all the servers:
    same user is configured as administrator on all the servers in one domain at windows 2003 server. Should this user be made part of domain admin and then this can be set up in the group of administrator for all the servers.
    How this is technically different?
    If same user is set up as an administrator on all the servers in domain, will it have the same access on all the files as a domain admin user?
    dhomya

    If the account is not admin on the domaincontrollers and the account is not member of domain admins or any other privileged AD group, the account has only user privileges on AD and thus cannot perform actions like creating and managing  accounts,
    groups, OUs,policies, sites, ...in other words cannot potentially ruin Active Directory.
    I think that is a pretty big difference.
    In fact, it is bad practice to perform you daily server management with an AD privileged account.
    In regards of file access. The domain administrator will be just an admin, and thus has the privilies assigned to the local admin group, just as any other admin. But if it are different accounts they might be member of different groups assigning different
    privileges. Always be carefull when assuming resulting privileges will be the same.
    MCP/MCSA/MCTS/MCITP

  • Changing or deleting the user name administrator folder in Mac OS X system preferences

    Hello!
    Does changing or deleting the user name administrator folder in Mac OS X system preferences affects my Creative Cloud license?
    [personal information removed... Mod - https://forums.adobe.com/docs/DOC-3731]
    [This is an open forum, not Adobe support, please do not post personal information]
    [If you are posting using email, please turn your 'sig file' function OFF for posting]

    Moving this discussion to the Creative Cloud Download & Install forum.
    Rodrigolima74 at minimum it is likely you will need to sign back in after changing the name.  I have not personally tested the behavior so please feel free to update this discussion after you have made the change.

  • How to add user in administrator group of project server 2010 with powershell command ?

    I want to add one user in Administrator group of Project Server .
    Please let me know how to do this through power shell command.

    Hello,
    You would need to use the PSI in your PowerShell commands. Here is a .Net example to get you started, convert this to PowerShell:
    http://blogs.msdn.com/b/ajjose/archive/2013/05/24/creating-a-project-server-user-and-adding-user-to-a-group-through-psi.aspx
    Examples of PowerShell and the PSI can be found here in some of the scripts:
    http://gallery.technet.microsoft.com/scriptcenter/Update-Server-Lookup-table-bb1ae14f
    http://gallery.technet.microsoft.com/scriptcenter/Create-Server-2010-2013-19bd3cc7
    http://gallery.technet.microsoft.com/scriptcenter/Bulk-create-Server-Sites-784f7b29
    These wont do what you need but will give you an idea of using the PSI in PowerShell
    Paul
    Paul Mather | Twitter |
    http://pwmather.wordpress.com | CPS

  • Office 365 Web Portal - We don't recognize this user ID or password

    We are currently in the process of rolling out Office 365 in our organisation. This deployment is to 80-90 users, for up to 10 users i am having the following issue.
    Users appear to be successfully syncing from our AD to the O365 cloud using DirSync. I have verified this by changing an attribute of an AD user and
    performing a sync and confirmed the changed attribute is shown in the O365 administrative portal.
    When attempting to activate the Office suite after installation the activation fails stating that the username or password is incorrect. When this
    user attempts to login to the online portal at portal.office.com the user receives a "We don't recognize this user ID or password". I have confirmed that the user id and password are correct and that the user is listed in the admin portal and has
    the relevant subscription assigned to them.
    From within the O365 admin portal (where i am a global administrator) i have blocked this user from being allowed to sign in or access services within
    the user’s settings screen. On attempting to sign in with this user on the O365 portal it informs me that the user is blocked and I need to contact an administrator. This is what I’d expect, to me this confirms that the user I am manipulating in the O365 portal
    is correct,  but after allowing sign in once again on the user’s settings page I receive the same “We don’t recognize this user ID or password” error message.
    Is this something anyone else has come across and successfully resolved in the past? If more detail is required to assist let
    me know.

    Hi,
    Thanks for sharing the steps here. And good to see that it works for you, at least for one affected user for now. 
    If you have any follow-up questions about this, I would suggest you to post in the dedicated forum of
    Office 365 Community, where you can get more experienced responses. Current forum only focuses on questions and feedback for Microsoft Office client, there is not so much about
    Office 365 admin/host/integration aspects here:
    http://community.office365.com/en-us/f/default.aspx
    The reason why we recommend posting appropriately is you will get the most qualified pool of respondents, and other partners who read the forums regularly can either share their knowledge or learn from your interaction with us. Thank you for your understanding.
    Regards,
    Ethan Hua
    TechNet Community Support
    It's recommended to download and install
    Configuration Analyzer Tool (OffCAT), which is developed by Microsoft Support teams. Once the tool is installed, you can run it at any time to scan for hundreds of known issues in Office
    programs.

  • ERROR:Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]

    Dear All,
    When I try to deploy WD application, it gives me this following error and doesn't deploy.
    com.sap.engine.deploy.manager.DeployManagerException: ERROR: Cannot connect to Host: [MTW02SDEP02] with user name: [Administrator]                     Check your login information.                     Exception is: com.sap.engine.services.jndi.persistent.exceptions.NamingException: Exception during getInitialContext operation. No server is running. [Root exception is
    Caused by: com.sap.engine.services.security.exceptions.BaseLoginException: Exception in creating new RemoteLoginContext instance.
         at com.sap.engine.services.security.remote.login.RemoteLoginContextExt.<init>(RemoteLoginContextExt.java:34)
         at com.sap.engine.services.jndi.implclient.LoginHelper.clientSideLogin(LoginHelper.java:81)
         at com.sap.engine.services.jndi.InitialContextFactoryImpl.getInitialContext(InitialContextFactoryImpl.java:355)
         ... 38 more
    Caused by: com.sap.engine.services.rmi_p4.P4ConnectionException: Possible problem: no available running server node. Check your running servers.
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:709)
         at com.sap.engine.services.rmi_p4.P4ObjectBrokerClientImpl.getException(P4ObjectBrokerClientImpl.java:697)
         at com.sap.engine.services.rmi_p4.Parser.newRequest(Parser.java:180)
         at com.sap.engine.services.rmi_p4.Connection.run(Connection.java:427)
         ... 1 more
    (message ID: com.sap.sdm.serverext.servertype.inqmy.extern.EngineApplOnlineDeployerImpl.checkLoginCredentials.DMEXC)
    Deployment exception : The deployment of at least one item aborted

    Hi
    Try this
    1. Is this is the remote server?
       if yes make one entry in host file under C:\WINDOWS\system32\drivers\etc
        format   :  <server ip>  <servername>
        restart NWDS
    2.If not then put the Ip address  instead of name inside Window--preference --Sap server Check.
    3. Put some different UserId and Password who has deployment rights
    Best Regards
    Satish Kumar

  • EBS 7.3 "Could not authenticate this user name and password, try again"

    I have just install Sun StorEdge Enterprise Backup Software 7.3 on a new Solaris 10 (06/06) system. I have installed the following packages with no errors: SUNWebsc (Client), SUNWebsn (Storage Node), SUNWebss (Server), SUNWebsm (Man pages) and SUNWebsg (Console).
    I have executed the �nsraddadmin� command for both root and administrator.
    I start the web browser with http://<hostname>:9000 and the java software loads with no errors. But when I try to login for the first time with administrator/administrator, I get the follow error:
    ERROR: Could not authenticate this user name and password, try again�

    I think the client is not able to do a HTTP POST
    to the WLS server but it can do a HTTP GET.
    I dont know why.
    http://manojc.com
    "Ganesh" <[email protected]> wrote in message
    news:3eba91bc$[email protected]..
    >
    Hi,
    I deployed a rpc web service using WLS 7.0 SP2 in HP-UX 11 environment.When I
    invoke the web service through my browser (IE 6.0) using the web servicesurl,
    it brings my service method correctly. From there, if I click the invokebutton
    it asks me for a network user name and password under "weblogic" realm???If I
    provide the admin user credentials (which I supplied while creating mydomain)
    it is not accepting that it keeps popping up this network user passwordwindow
    over and over. Not sure which username/password I have to provide here tosee
    the result of my service.
    If I try to invoke the web service through my client (static) I am gettinga connection
    refused exception. I guess either way, I am not able to access my webservice.
    In the attached file, I have cut and pasted the client stack trace as wellas
    the server log trace from weblogic.
    Any ideas would be highly appreciated.
    Thanks,
    Ganesh

  • Finding whether the user has administrative rights

    Is there any way by which we can find whether the user has administrative rights or not using java?

    The very notion of "administrative rights" is
    platform-dependent. It's not standard or well-defined
    what "administrative rights" means across all OSes.
    You'll have to use JNI or Runtime.execI searched net a lot but couldnt find any tutorial or artical regarding how to achieve this in C or C++.
    Any link will be helpful.

  • Disco 4i Error 'This user requires Create Any Materialized View Sys Priv'

    Hi,
    Firstly I will say we are late with moving to Disco 10g, fully understood and constantly remind people of need to upgrade.
    Oracle Apps 11i instance, we have upgraded the database 10g.
    In Disco 4i Admin, Import folder from Database, we receive Error Message:
    *'This user requires Create Any Materialized View System Priviledge'*
    Have spoken to number of our DBA's but been unable to resolve this. I have read loads of stuff about similar issues, but no direct hits really help me.
    I am guessing we need to logon as SYSTEM db user and execute
    h5. SQL> grant create materialized view to <username>;
    h5. SQL> grant alter any materialized view to <username>;
    Please can anyone advise, I am sure it's going to be a DB/Schema owner, as the username; i.e. APPS or EUL_US?
    I cannot see it being the fnd_user for the Disco EUL owner, e.g. SYSADMIN or PatStock.
    Thanks
    Mike

    Hi,
    If you are doing the import as SYSADMIN then you are connected as APPS so this is the database user that needs additional privilege.
    However, the APPS user only needs create materialized view privileges if there are manually created summary folders in the EUL, i.e. summary folders based on materialized views. If you are not using these then the privilege is not required.
    The EUL_US user just needs to give Discoverer Administrator privileges to the SYS_ADMIN user. Nothing else should be needed.
    Rod West

  • User Photo Administration (mass upload) iview doesn't run

    Hello,
    I'm trying to mass upload lots of pictures about employees to show on CLP the photo detail. I've been searching for a long time the right way to do it through the standard User Photo Administration (mass upload) iview but not success for me.
    I've checked this message really similar to mine but not solve my problem:
    https://forums.sdn.sap.com/thread.jspa?threadID=1063236&tstart=0
    The iview properties are set to run as explain:
    http://help.sap.com/saphelp_nw04/helpdata/EN/09/d7fe40be6eef23e10000000a155106/content.htm
    This is my scenario:
    EP7 sp15
    i've got a folder on my filesystem (c:\photos). In this folder i have two files
    a) mapping.properties.txt
    inside filled with:
    emp10110=10110
    USER.CORP_LDAP.emp10110=10110
    b) 10010.JPG
    After starting the task the photo was not updated and there was nothing in the application log!?
    What could be the problem? I can add the file manually but not through mass upload iview.
    Has anybody used the User Photo Administration (mass upload) iview ?
    Thanks in advance
    Scott
    Edited by: Scott Summer on Apr 28, 2009 9:57 AM

    Hi,
    Instead of use User Photo Administration (Mass upload) using a mapping.properties file, forget it and use a easy DOS script (lots of examples on google) to rename all files on your folder with the user ID of employees. Then you'll get a folder with the employees pictures with ID user as name file.
    If  your pictures are set like Required Picture Settings on your system(size,dimensions,...) , now you will upload files without problems directly.
    Regards
    Ruben

  • Default account setting for this user is incomplete

    Hi,
    I have created a user and gave rights(connect and resource) to that user. i have logged in and when i trying to open form module im getting a message.
    default account setting for this user is incomplete. Contact system administrator
    How to resolve this?
    skud.

    default account setting for this user is incomplete. Contact system administratorThis is an application error not an Oracle Forms error. Contact your system administrator to determine what is missing from the user account you created.
    Hope this helps,
    Craig B-)
    If someone's response is helpful or correct, please mark it accordingly.

Maybe you are looking for