ISE cannot push the profile to the cisco network setup assistant?

We have tried a few android devices with version 4.2+ but still got the error message ‘Unable to download profile.(Have you logged into the guest portal?)’ as shown at the bottom picture.
In fact, we are connecting the devices to an open SSID which performs MAC filtering, then redirect to CWA and login with AD credentials,
then redirect to Google play store and can successfully download the network setup assistant.
Could you please advise the possible reasons that would cause this error message and make ISE cannot push the profile to the cisco network setup assistant?

Here's a snipit from the Android spw.log. I see that there is an error trying to verify the hostname. Is it possible that this is caused by a non-trusted certificate? I'm using the self-signed cert built into ISE. I have an entry in the public DNS for guest.domain.com that resolves to the IP of my ISE server accessible from the guest subnet. I'm allowing all traffic from the guest VLAN to the ISE vlan on the firewall and all traffic to/from the ISE server in the provisioning ACL I have applied by ISE on the WLC during native supplicant provisioning. I know that guests can communicate with the ISE server since regular guest portal redirection works, just not the network setup assistant. I've renamed the domain to domain.com in this snipit.
2014.07.20 23:44:48 INFO:verion :4.4.4 SDK Level : 19
2014.07.20 23:44:48 INFO:State :START
2014.07.20 23:44:48 INFO:Starting Discovery
2014.07.20 23:44:48 INFO:Starting ISEDiscoveryAsynchTask
2014.07.20 23:44:48 INFO:DHCP Stringipaddr 192.168.30.110 gateway 192.168.30.1 netmask 255.255.255.0 dns1 208.67.222.222 dns2 208.67.220.220 DHCP server 192.168.30.1 lease 3600 seconds
2014.07.20 23:44:48 INFO:DHCP ipaddress192.168.30.110
2014.07.20 23:44:48 INFO:DHCP gateway192.168.30.1
2014.07.20 23:44:48 INFO:Discoverng ISE http return code :200
2014.07.20 23:44:48 INFO:ISEServer =guest.domain.com
2014.07.20 23:44:48 INFO:session =0516a8c000001932f37acc53
2014.07.20 23:44:48 INFO:Discovered using gateway :18786496
2014.07.20 23:44:48 INFO:Discovered ise server = guest.domain.com
2014.07.20 23:44:48 INFO:Discovered client mac = 5C-0A-5B-FC-37-0F
2014.07.20 23:44:48 INFO:Server:Key=guest.domain.com:0516a8c000001932f37acc53
2014.07.20 23:44:48 INFO:Downloading config fromguest.domain.com
2014.07.20 23:44:48 INFO:checkServerTrusted call
2014.07.20 23:44:48 INFO:checkServerTrusted call
2014.07.20 23:44:48 ERROR:DownloadprofileAsynchTask
2014.07.20 23:44:48 ERROR:java.io.IOException: Hostname 'guest.domain.com' was not verified
2014.07.20 23:44:48 ERROR:Hostname 'guest.domain.com' was not verified
2014.07.20 23:44:48 INFO:Internal system error.
On the ISE side, here is the snippet of logs during the same time as when the android network setup assistant was run.
2014-07-20 23:41:38,586 INFO [DefaultQuartzScheduler_Worker-6][] cisco.cpm.infrastructure.utils.NodeGroupFWUtil -:::::- Applied Firewall rules for node group.
2014-07-20 23:42:35,251 INFO [AbandonedTransactionReaper][] com.cisco.epm.db.AbandonedTransactionReaper -:::::- In AbandonedTransactionReaper : MaxActive : 20
0 CurrentActive : 0 MaxIdle : 200 MinIdle : 0 CurrentIdle : 2
2014-07-20 23:42:39,394 INFO [AbandonedTransactionReaper][] com.cisco.epm.db.AbandonedTransactionReaper -::::PDPInitialization:- In AbandonedTransactionReaper
: MaxActive : 200 CurrentActive : 0 MaxIdle : 200 MinIdle : 0 CurrentIdle : 0
2014-07-20 23:42:49,765 INFO [DataSourceListener Thread][] api.services.persistance.dao.DistributionDAO -:::::- In DAO getRepository method for HostConfig Type
: ACTIVE
2014-07-20 23:42:56,805 INFO [PDP-Heartbeats-0][] com.cisco.cpm.clustering.MnTClient -::::pdpha:- Removing session 0516a8c00000196f2a95cc53
2014-07-20 23:42:56,806 WARN [PDP-Heartbeats-0][] cpm.nsf.session.impl.SystemStateManager -::::pdpha:- Session 0516a8c00000196f2a95cc53 not found at complete
2014-07-20 23:43:35,441 INFO [portal-http-844314][] cisco.epm.license.flexlm.FlexlmFileHandler -:::::- Is License Valid for seId [1] = true
2014-07-20 23:43:35,441 INFO [portal-http-844314][] com.cisco.epm.license.LicensingManager -:::::- License is valid [true] for SeriveType [1]
2014-07-20 23:43:35,750 WARN [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -::0516a8c000001932f37acc53::guest:- --- GuestPortalUtils: Una
ble to determine language. Defaulting to English
2014-07-20 23:43:35,768 WARN [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -::0516a8c000001932f37acc53::guest:- --- GuestPortalUtils: Una
ble to determine language. Defaulting to English
2014-07-20 23:43:35,768 INFO [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -::0516a8c000001932f37acc53::guest:- initializing page definit
ion
2014-07-20 23:43:35,769 INFO [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -::0516a8c000001932f37acc53::guest:- Created guest theme page
def
2014-07-20 23:44:18,090 WARN [portal-http-844315][] cisco.cpm.guestportal.actions.SelfProvisioningAction -:test:0516a8c000001932f37acc53::guest:- ***BYOD Regi
stration Data***
macAddress: 5C:0A:5B:FC:37:0F
portalUser: test
authStoreName: Internal Users
authStoreGuid: 78954c30-e0f0-11e3-af67-005056bf4689
2014-07-20 23:44:18,113 INFO [portal-http-844315][] com.cisco.epm.jms.AQMessgeHandler -:test:0516a8c000001932f37acc53::guest:- Publishing message for event [T
xnCommit / commit] and message class[class com.cisco.epm.pap.api.transaction.Transaction]
2014-07-20 23:44:18,167 WARN [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -:test:0516a8c000001932f37acc53::guest:- --- GuestPortalUtils
: Unable to determine language. Defaulting to English
2014-07-20 23:44:18,168 INFO [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -:test:0516a8c000001932f37acc53::guest:- initializing page de
finition
2014-07-20 23:44:18,169 INFO [portal-http-844315][] cisco.cpm.guestportal.utils.CoAExecutorService -:test:0516a8c000001932f37acc53::guest:- Issue CoA reauth i
n 2000 milliseconds for sessionName 0516a8c000001932f37acc53
2014-07-20 23:44:18,171 WARN [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -:test:0516a8c000001932f37acc53::guest:- --- GuestPortalUtils
: Unable to determine language. Defaulting to English
2014-07-20 23:44:18,172 INFO [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -:test:0516a8c000001932f37acc53::guest:- initializing page de
finition
2014-07-20 23:44:18,173 INFO [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -:test:0516a8c000001932f37acc53::guest:- Created guest theme
page def
2014-07-20 23:44:20,171 INFO [pool-19-thread-4][] cisco.cpm.guestportal.utils.CoAReauthTask -:test:0516a8c000001932f37acc53::guest:- Running CoAReauthTask for
_sessionName 0516a8c000001932f37acc53
2014-07-20 23:44:20,194 INFO [pool-19-thread-4][] cisco.cpm.guestportal.utils.CoAReauthTask -:test:0516a8c000001932f37acc53::guest:- Issue Local CoA for sessi
on 0516a8c000001932f37acc53
2014-07-20 23:44:50,768 INFO [ContainerBackgroundProcessor[StandardEngine[Catalina]]][] cpm.admin.infra.action.SessionCounterListener -:::::- sessionDestroyed
- deducted one session from counter - Session ID - 0FFE9C73C9209D4EE2534558CB8F723B - Session Count - 0
2014-07-20 23:46:58,502 INFO [portal-http-844315][] cisco.epm.license.flexlm.FlexlmFileHandler -:::::- Is License Valid for seId [1] = true
2014-07-20 23:46:58,502 INFO [portal-http-844315][] com.cisco.epm.license.LicensingManager -:::::- License is valid [true] for SeriveType [1]
2014-07-20 23:46:58,693 WARN [portal-http-844315][] cisco.cpm.guestportal.utils.GuestPortalUtils -::0516a8c000001932f37acc53::guest:- --- GuestPortalUtils: Una
ble to determine language. Defaulting to English
2014-07-20 23:46:58,702 INFO [portal-http-844315][] cisco.cpm.provisioning.cache.FlowStateCacheManager -::0516a8c000001932f37acc53::guest:- Deleted old flow st
ate session with device id 5C-0A-5B-FC-37-0F

Similar Messages

Cisco Network Setup Assistant Unable to install the certificate on Android KitKat

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Greetings,
I'm having issues with deploying the CA. Although the Cisco app fails, the user cert (but no CA) appears to install and is accessible during wifi setup. I am running the latest version of Cisco Network Setup Assistant 1.2.42. The phone is running Android KitKat 4.4.4, not rooted, running stock T-Mobile rom. I'm able to authenticate with the guest side, and get as far as Installing Certificates... Reference the screen shots attached.
Error message cisco Network Setup Assistant: "Unable to install the certificate. Exit the application and run it again to continue to the installation."
I have ran the application several times, it keeps returning to this same message.
After failure of the Cisco app, I noticed there is a certificate manager with CA cert and key, and than subsequently one new key continues to loop after until I cancel (also in screenshots).
I have tried decryption, removing all security, and clearing credentials, yet the problem persists. Any help is appreciated.

Cisco Network Setup Assistant with WIndows8

Hi, I'm trying to provisioning on Windows 8(Surface pro)
When the Cisco Network setup Assistant is on, it asks 'network password' while the ssid is wpa2-enterprise.
and I configured as it is on NSP.
Is it a bug ??

Hi,
What version of ise are you on, also what is the windows native supplicant provisioning version? See if the release notes for 1.2 meet your current design.
http://www.cisco.com/en/US/docs/security/ise/1.2/release_notes/ise12_rn.html#wp378491
Thanks,
Tarik Admani
*Please rate helpful posts*

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)

An internal error occurred on the report server. See the error log for more details. (rsInternalError) Get Online Help The profile for the user is a temporary profile. (Exception from HRESULT: 0x80090024)
while proview the report i will get this error am using sql server 2008R2,
can u plesae hlep me out for this

<Header>
<Product>Microsoft SQL Server Reporting Services Version 2009.0100.1600.01 ((KJ_RTM).100402-1539 )</Product>
<Locale>English (United States)</Locale>
<TimeZone>W. Europe Standard Time</TimeZone>
<Path>C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\Logfiles\ReportServerService__01_30_2015_03_09_32.log</Path>
<SystemName>WEGDACM1</SystemName>
<OSName>Microsoft Windows NT 6.1.7601 Service Pack 1</OSName>
<OSVersion>6.1.7601</OSVersion>
<ProcessID>4880</ProcessID>
<Virtualization>Hypervisor</Virtualization>
</Header>
rshost!rshost!5e4!01/30/2015-03:09:32:: i INFO: Currently registered url http://+:80/ReportServer_MSSQLSERVEREPORT/ on endpoint 2
rshost!rshost!5e4!01/30/2015-03:09:32:: e ERROR: Failed to register url=http://+:80/Reports/ for endpoint 3, error=b7.
rshost!rshost!5e4!01/30/2015-03:09:32:: w WARN: Endpoint 3 is enabled but no url is registered for vdir=/Reports, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportManager.
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: e ERROR: Error creating HTTP endpoint. System.Runtime.InteropServices.COMException (0x800700B7): Cannot create a file when that file already exists. (Exception from HRESULT: 0x800700B7)
at Microsoft.ReportingServices.HostingInterfaces.IRsUnmanagedCallback.CreateHttpEndpoint(RsAppDomainType application, String[] urlPrefixes, Int32 cPrefixes, String[] hosts, Int32 cHosts, Boolean wildCardPresent, String virtualDirectory, String
filePath, Int32 authType, Int32 logonMethod, String authDomain, String authRealm, Boolean authPersist, Int32 extendedProtectionLevel, Int32 extendedProtectionScenario, Boolean enabled)
at Microsoft.ReportingServices.Library.ServiceAppDomainController.SetWebConfiguration(RunningApplication rsApplication, Boolean enabled, String folder)
rshost!rshost!65c!01/30/2015-03:09:32:: i INFO: Endpoint 4 is disabled and no url is registered vdir=/ReportServer_MSSQLSERVEREPORT/ReportBuilder, pdir=C:\Program Files\Microsoft SQL Server\MSRS10_50.MSSQLSERVEREPORT\Reporting Services\ReportServer\ReportBuilder.
rshost!rshost!1e30!01/30/2015-03:09:32:: i INFO: Derived memory configuration based on physical memory as 16776696 KB
servicecontroller!DefaultDomain!1e30!01/30/2015-03:09:32:: i INFO: Recycling the service from the default domain
rshost!rshost!1e30!01/30/2015-03:09:46:: i INFO: Application domain type WindowsService statistics: created: 7, unloaded: 7, failed: 0, timed out: 0.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:46:: i INFO: Appdomain:11 WindowsService_7 started.
library!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
servicecontroller!WindowsService_7!1e30!01/30/2015-03:09:46:: e ERROR: Error initializing configuration from the database: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
resourceutilities!WindowsService_7!1e30!01/30/2015-03:09:47:: i INFO: Reporting Services starting SKU: Enterprise
servicecontroller!WindowsService_6!1e30!01/30/2015-03:09:47:: i INFO: Service controller exiting.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 unregistered.
appdomainmanager!DefaultDomain!1e30!01/30/2015-03:09:47:: i INFO: Appdomain:10 WindowsService_6 unloading.
appdomainmanager!DefaultDomain!1f40!01/30/2015-03:09:47:: i INFO: AppDomain:10 0 pending unload(s)
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Exception caught while starting service. Error: Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: The report server has encountered a configuration
error.
library!WindowsService_7!2410!01/30/2015-03:09:47:: e ERROR: ServiceStartThread: Attempting to start service again...
library!DefaultDomain!202c!01/30/2015-08:04:43:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:25:26:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
library!DefaultDomain!202c!01/30/2015-08:26:16:: e ERROR: Throwing Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException: No DSN present in configuration file, Microsoft.ReportingServices.Diagnostics.Utilities.ServerConfigurationErrorException:
The report server has encountered a configuration error. ;
The above is my log file pls find it resolve my problem,am trying to add the encryption key to my configuration seetings it will through the error like The profile you were used is temporary profile.

Determine the profile using the Authorization class?

Hi All,
How can i determine the profile using the authorization class?
Does anybody know which table and and field?
Regards,
Luke

Hi ,
try with these tables
agr_users
agr_1250
usr21
Pls let me know if you still need any more help.
Thanks and regards,
Rajeshwar.

Network Setup Assistant runs every time I turn the computer on.

Everytime I turn on my computer, Network Setup Assistant decides that it wants to help me locate and create a new network - which is awfully nice of it. The problem, however, is that it either a) never fully completes because of some failure, or b)doesn't need to happen in the first place because I can access my Airport network without the setup assistant.
Is there any way to turn the Network Setup Assistant off, or at least make is stop trying to help me when I don't need it to?

First you can just uncheck them if they are checked if there's nothing there that you want to open when you boot up. Usually there are software programs that you have downloaded
that you might have in your menu bar at bootup.
There might be the Mac HD. Check that if you want the HD window opened after bootup.

ISE v1.1.1 Network Setup Assistant errors

Hello Everyone.
I've been having some difficulties with ISE v1.1.1 while setting up and testing the SISE course. It's setup so that BYOD users can self-service a guest account with the ISE and register their device. After that the Network Setup Assistant (NSA) is supposed to push the certificates to the system and make it able to access the network. My problems are two fold in is situation. Firstly I have a second interface setup without a gateway for RDP access that the NSA seems to select everytime for the interface it wants to setup, I've bypassed this for the time being with direct access to the machine.Is there a way to direct the NSA to the correct interface? Secondly Once the NSA is running, it will push the RA certificate to the machine and then immediately goto an error that the NSA cannot setup the network. I cannot find an error code on the NSA agent nor can I find a log to help me pinpoint the error the NSA encountered. Any ideas or help I can recieve with this will be appricated.
As far as I can tell the cwa and nsp redirects are working as intended. The Switch for Dot1x downloads the correct dACLs and the authorization profiles are placed correctly
Thank you.

Open Java Control Panel, click the Advanced tab, go to Perform certificate revocation checks on and select Do not check

ISE BYOD Android : Impossible to launch "Network setup assistant"

Hello
The Byod procedure fails when launching "Network setup assistant"
Error message is: "This profile could not be downloaded, are-you connected to Guest Portal ?"
WLC 5508 (VM) 7.5
Wlan : Flexconnect
Config : AP Flexconnect
ISE 1.3
Android 4.1.2
Here are the step:
1: Rule CWA : Redirect to Guest portal : OK
2: Rule CWA : Redirect to device portal : OK
3: Rule Android_dualSSID : Downloading "Network setup assistant" from Googleplay : OK
4: Rule Android_dualSSID : Launch "Network setup assistant 1.2.40" : NOK
Note : Profile "CWA_GooglePlay" = Redirect-ACL (NSP-ACL-Google)
The NSP-ACL-Google looks like:
(Taken from Flexconnect AP):
Extended IP access list NSP-ACL-Google
    10 permit ip any host <IP ISE>
    20 permit ip host <IP ISE> any
    30 permit udp any range 0 65535 any eq domain
    40 permit udp any eq domain any range 0 65535
    50 permit ip any 74.128.0.0 0.0.255.255
    60 permit ip 74.128.0.0 0.0.255.255 any
    70 permit ip any 173.194.0.0 0.0.255.255
    80 permit ip 173.194.0.0 0.0.255.255 any
    90 permit ip any 206.111.0.0 0.0.255.255
    100 permit ip 206.111.0.0 0.0.255.255 any
    110 permit ip any 74.125.0.0 0.0.255.255
    120 permit ip 74.125.0.0 0.0.255.255 any
    130 permit ip any 208.117.224.0 0.0.0.255
    140 permit ip 208.117.224.0 0.0.0.255 any
    150 permit ip any 216.12.120.0 0.0.0.255
    160 permit ip 216.12.120.0 0.0.0.255 any
    170 deny ip any any
Could you please help
Michel Misonne

Hello
We use the one describe in "Cisco Unified Access (UA) and Bring Your Own
Device (BYOD) CVD"
I tried also with this one:
Extended IP access list NSP-ACL-Google
    10 permit ip any host 10.35.124.195
    20 permit ip host 10.35.124.195 any
    30 permit ip any host 10.35.65.4
    40 permit ip host 10.35.65.4 any
    50 deny ip any 72.163.1.0 0.0.0.255
    60 permit ip any any
10 : ISE
20 : ISE
30 : DNS
40 : DNS
50  :Enroll.cisco.com= 72.163.1.80 ( To redirect the Network setup assistant to ISE)
(Enroll.cisco.com is the adresse that the Network setup assiatnt is tryiong to connect)
Regards
Michel

How can I move my old messages from my PC to my new Macbook (not the profile, just the messages)?

I have used Thunderbird for years as I am a business owner who needs to keep a copy of old emails. I have just changed from a PC to a Macbook pro, and want to move all my old archived messages from the past 2 or 3 years to my Mac, including non-archived messages (Sent & Trash) from this year. I have already created my profile in the new Mac, and have been using it for the past couple of weeks. (By the way, this is a POP mail profile.) Now I just want to move the old messages over. Which exact files do I copy and paste, and into which folders? If the folders do not yet exist, I guess I need to create them first. But where on the Mac? I have found (on my old PC) the "Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/username/ directory with Archives and Trash subdirectories. But each directory seems to have a name (like "Inbox", or "Sent" or "2013") and another file with the same name, but an ".msf" suffix (like "Inbox.msf" or "Sent.msf" or "2013.msf"). Thanks in advance to any who can help.

The file structure is a little complex. I will use inbox as an example.
Inbox (a large file with no file extension)
Inbox.msf ( An index of inbox with tags etc. Can be deleted with only loss of tags)
Inbox.sdb (a folder, indicating that the folder within Thunderbird has a sub folder.
POP mail is stored in
Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/[Server name]/
Local folder is stored in
Appdata/Roaming/Thunderbird/Profiles/*.default/Mail/Local Folders/
As long as you do not overwrite, you can copy and paste whole folder trees into local folders (stuff on your old computer under a mail account is best relocated to local folder and then sorted as necessary afterwards.
Note that you should delete foldertree.json after making those sorts of copies (it forces a full refresh of the folder tree, no cache) and under no circumstances copy data with Thunderbird running. It can irrevocably corrupt things

Ps CS6 Problem: Pixels put in Mac file icon have not been converted to the profile of the icon

Pixels put in a Mac file icon image have not been converted to the colour profile of the icon image.
For example, when ProPhoto or Adobe RGB pixels are put in an icon image with no profile or "Generic RGB" profile, the result is a washed-out appearance to the icon.
Apple recommends sRGB (PNG) images in icons. Adobe, please comply with that.
Edit: I realise that CS5.1 did the same as CS6.

Makes you wonder whether the person who programmed the icon generating code... Nah, I won't say it. Down boy.
-Noel

How to clear the dhcp leases in Cisco Network Registrar

Hello,
I have a setup with Cisco Network Registrar. We have a few scoops with the lease time set to forever. Now I want to reconfigure the scoops to have a 24h hour leasetime. But before this I would like to clear all the current leases. I have problems doing this. I have tried to delete the scoop and then create a new but the old leases is still there. Does anyone have any ides?

I did not get it to work. I had to delete each lease in the subnet manually. I suggest you use the batch command to do it.
Just go to the local/bin folder where the cnr is installed and issue the following:
nrcmd -N username -P password -b <"PATH TO FILE"
Just make a textfile with the commands you want to run as a batch like:
lease 10.28.4.1 force-available
You need to do one row for each ip.

Data Integrator Problem with the profiles of the "Security Manager" module.

Hi!!!,
I wanted to be able to obtain a profile that do not eliminate anything in the “Topology Manager” module. I duplicated de original “TOPOLOGY ADMIN” profile and for each object I removed the “delete” method.
That with the purpose of the user that has to asigned this profile can not delete anything of this module. The option delete is disabled, but when the user made clic in the trash can icon or he types ENTER, he can delete only the master repository.
I do not if this is because some update, I´m use 10.1.3.5 ODI version.
Can somebody helpme please???.
Thanks.
Edited by: 807694 on 5/01/2011 11:07 AM

Hi,
For BI 7 data source, you need transport active version from BW development to quality. So the procss is
1. Transport data source in source system
2. Replicate data source in BI system.
3. Transport active version of data source from BI system.
4. Transport other objects.
5. Load data till PSA.
6. Load DTP from PSA to data target.
Regards,
Pravin

When I try to go to the profile manager, the Mac Terminal says this: "dyld: unknown required load command 0x80000022" and I don't know what that means!

Firefox has been acting up lately, so I was going to create a new profile and copy over some stuff from the old one to the new one. I followed the instructions on the troubleshooting page, but when I tried to type in /Applications/Firefox.app/Contents/MacOS/firefox-bin -ProfileManager, the Terminal says dyld:unknown required load command 0x80000022. I know Firefox is closed, so I have no idea what's going on. Please help!

add "arch -i386 " at the beginning of the command
See http://support.mozilla.com/en-US/questions/838031

OpenGL Profiler , the Profile for the GeForce 8800 GT ?

Hi there,
i'm looking for the profile of this video card, where can i get it ?
i really need it for playing with some game, opengl profiler is the only one issue for having a good render.
TY very much for your help ^^

Hi there,
i'm looking for the profile of this video card, where can i get it ?
i really need it for playing with some game, opengl profiler is the only one issue for having a good render.
TY very much for your help ^^

I received a refurbished MBA today. I have my original files on Time Machine from my first computer with 2 accounts/profiles/users. I want to make migration of those files easy, but change the name of one of the profiles on the MBA.Things I should know?

I have not set up the New-to-me MBA yet.

Thanks so much for that article, however, I think that article is more confusing, since it says that there are 2 names, and then throughout the article refers to at least 4, and I am not 100% sure that was what I am after... So, maybe I am not asking correctly.... let me give more details here..
I had a late 2008 Macbook with 2 "profiles" (work/home) (not sure which 'names' these would be) that was consistently backed up to an external HDD via Time Machine through my wifi network at home. I had upgraded the OS to Mavericks and the "Latest" backup was backed up in Mavericks. This computer was stolen a couple weeks back. I have now purchaed an Apple refurbished macbook air and received it recently and have not even taken it out of the packaging. I assume that it is running Mavericks, but don't know that for sure. Thus, I have not created any new accounts on the new device yet. I want to migrate my backed up files from the external HDD and re-establish 2 'profiles', however, one of the "names" I'd like to change for the new machine. So part of my issue is not knowing what the differences are between, "short names", "display names", "user account names", "profile names", and "home directory names". I know that some of these refer to the same thing, but I am unsure which is which.
What I remember about my old machine was this... When I looked at the Users folder, there were three folders listed within it, "Shared", "work-name", "home-name". I assume these are what's refered to as "home directory names" since they were all lowercase, all one word. When I turned on the computer, the "profiles" that showed up for login had different words than these listed, let's say, "work" and "home".
What I want is for the "work" profile and "work-name" directory to stay the same, and the "home" profile name to stay the same while the "home-name" directory name changes to something else.
I've read many posts now, and haven't found the clear cut example of what I am attempting to do. Some say to create a dummy admin account on the new machine, use Migration Assistance to bring the backed-up files over to the new-to-me MBA, with the two profile names as they existed. In the dummy admin account somehow make changes to the one account I want to change, and then after restart, remove the dummy admin account. I found numerous posts indicating that this may result in permissions problems, which I do not want to have to debug. I'm a decent computer geek, but not a full on superuser.
Other options I've read indicate to plug the external HDD directly into the new machine at first start up and use the Setup Assistant and transfer the info that way. Again however, I then have the issue of one of the names, I'd like changed.
While typing this I found.....
Each user in Mac OS X has a full "Name" and a "Short Name" as defined in the Users pane of System Preferences. The short name can contain up to 255 lowercase characters with no spaces. This is the name used to create a user's home directory (also known as the user's Home or Home folder) in the Users folder.
This is from ealier versions of the OS, so I am not even sure if this is Mavericks friendly or not.

ISE cannot push the profile to the cisco network setup assistant?

Similar Messages

Maybe you are looking for