ISE-Guest Portal Redirection
Dears
i have configured everything right for the Gusset login and everything is going the way i want except one thing that the switch doesn’t force the quest to web directed to the ISE login paged however the ouput of the below command looks perfect and when i copy the url manually it works .. so how can i make it automatically ?
ISE-SWITCH#sh authen se int f0/12
Interface: FastEthernet0/12
MAC Address: c80a.a96a.47b1
IP Address: Unknown
User-Name: C8-0A-A9-6A-47-B1
Status: Authz Success
Domain: DATA
Security Policy: Should Secure
Security Status: Unsecure
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Group: N/A
ACS ACL: xACSACLx-IP-CENTRAL_WEB_AUTH-50683952
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://EG1SHQ06.HEIWAY.NET:8443/guestportal/gateway?sessionId=0A8B080600000005001ECF63&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: 0A8B080600000005001ECF63
Acct Session ID: 0x00000007
Handle: 0xD9000005
Runnable methods list:
Method State
mab Authc Success
dot1x Not run
ISE-SWITCH#sh ip access-l
Extended IP access list ACL-WEBAUTH-REDIRECT
10 deny ip any host 10.139.8.216
11 permit tcp any any eq www
12 permit tcp any any eq 443
Extended IP access list Auth-Default-ACL-OPEN
10 permit ip any any (314 matches)
Extended IP access list xACSACLx-IP-CENTRAL_WEB_AUTH-50683952 (per-user)
10 permit udp any any eq domain
20 permit icmp any any
30 permit tcp any any eq www
40 permit tcp any any eq 443
50 permit tcp any host 10.139.8.216 eq 8443
i did this changes and even upgraded the switch IOS to 12.2(58)SE2 but no luck ,
any other idea?
ISE-SWITCH#sh ip access-l
Extended IP access list ACL-DEFAULT
10 permit udp any eq bootpc any eq bootps
20 permit udp any any eq domain
30 permit icmp any any
40 permit udp any any eq tftp
50 permit tcp any host 10.139.8.216 eq www
60 permit tcp any host 10.139.8.216 eq 443
70 permit tcp any host 10.139.8.216 eq 8443
80 permit tcp any host 10.139.8.216 eq 8905
90 permit udp any host 10.139.8.216 eq 8905
100 permit udp any host 10.139.8.216 eq 8906
110 permit tcp any host 10.139.8.216 eq 8080
120 permit udp any host 10.139.8.216 eq 9996
130 deny ip any any log
Extended IP access list ACL-POSTURE-REDIRECT
10 deny udp any any eq domain
20 deny udp any host 10.139.8.216 eq 8905
30 deny udp any host 10.139.8.216 eq 8906
40 deny tcp any host 10.139.8.216 eq 8443
50 deny tcp any host 10.139.8.216 eq 8905
60 deny tcp any host 10.1.252.21 eq www
70 permit ip any any
Extended IP access list ACL-WEBAUTH-REDIRECT
10 deny ip any host 10.139.8.216
20 permit tcp any any eq www
30 permit tcp any any eq 443
Extended IP access list Auth-Default-ACL-OPEN
10 permit udp any eq bootpc any eq bootps
20 permit udp any any eq domain
30 permit icmp any any
40 permit udp any any eq tftp
50 permit tcp any host 10.139.8.216 eq www
60 permit tcp any host 10.139.8.216 eq 443
70 permit tcp any host 10.139.8.216 eq 8443
80 permit tcp any host 10.139.8.216 eq 8905
90 permit udp any host 10.139.8.216 eq 8905
100 permit udp any host 10.139.8.216 eq 8906
110 permit tcp any host 10.139.8.216 eq 8080
120 permit udp any host 10.139.8.216 eq 9996
130 deny ip any any
Extended IP access list xACSACLx-IP-CENTRAL_WEB_AUTH-50683952 (per-user)
10 permit udp any any eq domain
20 permit icmp any any
30 permit tcp any any eq www
40 permit tcp any any eq 443
50 permit tcp any host 10.139.8.216 eq 8443
Similar Messages
-
ISE Guest Portal redirection not working
I have built a lab at home. I have a Win2008 Server for AD/DNS, ISE 1.2 (VM trial), a 3560-cg switch, 2500 WLC and 2602i AP. I have configured everything as per the documentations online. My issue is that when I connect to the open SSID, it gets connected and has the dns server populated as well, but the redirection never takes place. I can search for google or cnn.com but it just stays at looking up host or something. However, if i take the redirect URL from the WLC and then do it on the browser, it does go to the guest portal. Let me know what issues I can see and if there is any other information I can provide.
Issue resolved.
Since my lab environment didnt have access to the internet and hence dns servers 8.8.8.8 would not resolve any public ips. But when an address is resolvable by a dns then it redirects nicely. For test I created a dns entry on the dns server itself and tested it.
Sent from Cisco Technical Support Android App -
Cisco ISE guest portal redirect not working after successful authentiation and URL redirect.
Hi to all,
I am having difficulties with an ISE deployment which I am scratching my head over and can't fathom out why this isn't working.
I have an ISE 3315 doing a captive webportal for my guest users who are on an SSID. The users are successfully redirected by the WLC to the following URL:https://x.x.x.x:8443/guestportal/Login.action?portalname=XXX_Guest_Portal
Now when the user passes through the user authentication splash screen they get redirected to https://x.x.x.x:8443/guestportal/guest/redir.html and recieve the following error:
Error: Resource not found.
Resource: /guestportal/
Does anyone have any ideas why the portal is doing this?
Thanks
PaulHello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again. -
How to use ISE Guest Portal for AD users
Hi there,
As subject explains all, I want to use ISE Guest Portal for my domain users. I have tried many different ways to authenticate users and finally I came to the conclusion that ISE CWA works pretty well and is very stable. WLC Webauth sucks alot, does not redirect to the login page always.
Can you please share what other ways are stable ways to authenticate AD users? I know about WPA 802.1x authentication but that requires a CA in the network which is not available at the moment. So can you please Suggect?
Otherwise, I want to use ISE Guest Portal for my AD users as well. AD is already integrated to ISE, the issue happens when I attempt to athenticate using AD user account, the user gets authenticated but the Guest Portal redirects me to Device Provissioning page and there it shows an error saying "there is not policy to register the device, contact system admin"
Am I missing something??
I am running WLC 5760 with ISE 1.2
Thanks in advance..Hi,
Can you post a screenshot of your current policies? Also for 802.1x authentication although it is best practices you do not have to have an internal CA to make this solution work. You can disable the option to "validate server certificate" or you can use a trusted CA to sign the certificate for the eap interface.
In most cases 802.1x is the method to go because it provides dynamic authentication without forcing users to redirected to a web page multiple times throughout the day, scenarios such as computers that sleep or users that are mobile will not have connectivity until they redirect to the portal if one of the scenarios exist. You also gain WPA encryption on your WLAN, if you are using strictly layer 3 web auth you run into issues where encryption is not used and rely on encryption from the application as your method of data integrity and security.
Thanks,
Tarik Admani
*Please rate helpful posts* -
Cisco ISE Guest Portal - DNS Issue - External Zone
Hello,
I have a customer that has the following sceanrio :
In a wireless deployment and a Cisco ISE 1.1.3 deployment with CWA, when the wireless guest receives the redictect URL from ISE (URL to access the ISE Guest Portal), this URL is based on the ISE DNS name, not on its IP address; so, the PC can't resolve this via DNS name since there is no DNS in the External zone (for guets) or by using the ISP DNS servers addresses provided by the DHCP server, and, so, it can't access the Guest Portal at all ;
I know that in trying to manually code the IP address - this does not work (ie in the CWA Authorization profile, the equivalent URL redirect via the CISCO av-pair as follows :
cisco-av-pair=url-redirect=https://10.10.10.10:8443/guestportal/gateway?sessionId=sessionIdValue&action=cwa, )
since the sessionIdValue variable is not replaced by its real value when sent to the wireless client)
My question is : Has this issue been addressed in version Cisco ISE 1.2 - has anyone tried it if has been addressed? If not in Cisco 1.2 - does anyone know iof this feature will become available?
Thank-you in advance for your replies.
Robert C.Robert,
Manual assignment has been made available in ISE 1.2 release.
M. -
Pb to reach ISE Guest portal due to DNS constraints
I have set up a Guest Portal with WLC 5508 7.4 and ISE 1.1.1 ;
everything is OK, except one thing :
the Guest VLAN, associated to the Guest SSID is, actually, a DMZ behind my customer firewall and the DHCP parameters provided to the wireless Guest equipement connected on this VLAN include the public ISP DNS servers addresses, not the customer internal DNS serveurs addresses;
this seems OK since the idea of this Guest SSID is to give a pure Internet access to the Guests, and no connection at all towards the customer internal servers;
the problem is that, when the wireless guest receives the redictect URL from ISE (URL to access the ISE Guest Portal), this URL is based on the ISE DNS name, not on its IP address; so, the PC can't resolve this internal DNS name by using the ISP DNS servers addresses provided by the DHCP server, and, so, it can't access the Guest Portal at all ;
Apart from changing those DNS values in the DHCP server (the customer does not accept this solution), how could we solve this problem ?
I have tried to code manually , in the CWA Authorization profile, the equivalent URL redirect via the CISCO av-pair as follows :
cisco-av-pair=url-redirect=https://192.168.1.10:8443/guestportal/gateway?sessionId=sessionIdValue&action=cwa,
but, it does not work, since the sessionIdValue variable is not replaced by its real value when sent to the wireless client
any comment welcomedWe had the same issue. Our solution was to advertise the internal IP address from our external facing DNS server and let it propagate publicly. Our ISE box is in a DMZ and the firewall rules do not allow outside traffic to it, however the clients will get the correct internal IP address and since they are already inside the firewall on the DMZ segment they are able to get to the ISE box with the publicly resolved internal IP address. The other option we entertained was a firewall DNS redirect. That would work by intercepting the DNS request for that specific URL and return the proper internal IP, all other DNS requests would pass through to the public DNS server.
-
ISE Guest Access- Redirect to URL after successful logon
Currently, when guest users attempt to browse they get redirected to the guest portal. After login, they get a message that they can now access the original URL. Is there a way to automatically redirect to the URL they were trying to access, or remember the URL after they login?
ISE guest flow :
The user associates to the web authentication Service Set Identifier (SSID).
The user opens the browser.
The WLC redirects to the guest portal (such as ISE or NGS) as soon as a URL is entered.
The user authenticates on the portal.
The guest portal redirects back to the WLC with the credentials entered.
The WLC authenticates the guest user via RADIUS.
The WLC redirects back to the original URL -
ISE Guest Portal and one more SSID using internal accounts
Hi Guys,
I have two SSIDs on WLC, the first is related with ISE Guest Portal and the second is related with employee but i realize that the
Guest user can access the employee SSID and employee accounts can access the Guest portal page.
I guess this is happen because i cannot split these databases under "Internal Users" on Authentication Policy.
How can i restrict the access even if i am using the internal databse?
thanks a lotusing the Authorization policy is the right way. Match the corp ID store to the corp WLAN SSID ID in the AuthZ policy, for example (where Employee is your corp ID store and yyyy is the name of your corp SSID):
-
Hello
Has anyone else experienced the issue where this exit button works when IE is used to login to the ISE Guest portal, but not when Chrome is used. Same for Safari (from IPAD).
Sent from Cisco Technical Support iPad AppGoogle Chrome is not a fully supported browser for use with the Administrative User Interface of the Identity Services Engine (ISE), Version 1.1.3 and earlier.
-
hi all,
my customer has set Wireless LAN Guest Voucher for 28 days however after 6 days its not working.
Our customer gives Wireless LAN Guest User a 28 days voucher from ISE Guest Portal Solution. After 6 days of using the accounts will not work. Must be deleted and added new. These accounts are not expired, but the login will fail after 6 days.
any idea why this is or do I need to escalte this to Cisco?
regards,
LanceYou might have another limiter in there. have are your durations configured?
//////only if expiring////////////////////////
You are probably hitting the account duration set on the Sponsor Group that created the voucher.
this can be set under administration -> sponsorgroups -> click on the sponsor group in question -> authorization levels -> and set the Max duration for accounts. -
5760 v3.6 guest portal redirect to ISE
I'm testing a new set of 5760 controllers for a future production rollout, running software version 3.6. Our current production setup consists of older WISM-1 and 4402 controllers running CUWN 7.0. Our guest network has an anchor in the DMZ, redirecting to ISE.
In the recent thread (https://supportforums.cisco.com/discussion/12319151/3850-ise-guestportal-no-redirect-v-334), one of the posters said that guest redirection in 3.6 works similarly to redirection in CUWN, while in 3.3 it is very different. I found the documentation for 3.3 (http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117717-config-wlc-00.html), which I have to say I don't like very much. However, I find the configuration and command reference guides for 3.6 are less than helpful on this point.
So the question I have is whether guest networking with an external redirect to ISE looks like the following in 3.6? Or does it work like CUWN, where the SSID is configured with layer 3 security? If it uses layer 3 security like CUWN, does anybody have a quick configuration sample for how it can work end to end in 3.6?
------ From the document http://www.cisco.com/c/en/us/support/docs/wireless/5700-series-wireless-lan-controllers/117717-config-wlc-00.html ---------
The flow includes these steps:
The user associates to the web authentication Service Set Identifier (SSID), which is in fact open+macfiltering and no Layer 3 security.
The user opens the browser.
The WLC redirects to the guest portal.
The user authenticates on the portal.
The ISE sends a RADIUS Change of Authorization (CoA - UDP Port 1700) in order to indicate to the controller that the user is valid, and eventually pushes RADIUS attributes such as the Access Control List (ACL).
The user is prompted to retry the original URL.I have a project with a 5760 running 3.6 working to a 5508 anchor controller in a DMZ.
I have web authentication working to an ISE OK.
Regards
Roger -
ISE Wired guest portal redirect even after authentication
Hi
I have configured both Wired and Wireless guest authentication via guest portal. Wireless is working fine, however the when trying with Wired, the redireciton page is keep getting even after user authenticated.
I'm not seen the redirection authorization policy in my logs however I can see only the user authentication logs (successful). Attached is my configuration and logging output.
Here is what I see on the interface
ABQT-3FLR-ACC-01#sh authentication sessions interface gigabitEthernet 4/0/19
Interface: GigabitEthernet4/0/19
MAC Address: a0b3.ccca.2ab1
IP Address: 10.1.3.16
User-Name: A0-B3-CC-CA-2A-B1
Status: Authz Success
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Policy: N/A
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://xxxx-TW-ISE-2.xxx.xxx.qa:8443/guestportal/gateway?sessionId=AC14011F000001571E52779F&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC14011F000001571E52779F
Acct Session ID: 0x00000309
Handle: 0xE6000158
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success
Here is the ACL
Extended IP access list ACL-WEBAUTH-REDIRECT
10 deny udp any any eq domain (1344 matches)
20 deny ip any host 172.20.5.12 (8122 matches)
30 deny ip any host 172.20.5.14
40 permit tcp any any eq www (3124 matches)
50 permit tcp any any eq 443 (202927 matches)
60 permit tcp any any eq 8080 (114 matches)
70 permit ip any any (8056 matches)Hi Mohannad,
Thanks for your response.
Actually the as per the configuration it should work, I'm still trying to find out what is what has gone wrong with this configuration. Infact I have tested with 3560 switch with the same config and it worked. only difference here is we used 2960S switch.
We need to find out why the next Auth policy is not hitting once user is authenticated.
Here is the port configuration and the authen status of the port.
ABQT-3FLR-ACC-01#sh running-config interface gig4/0/19
Building configuration...
Current configuration : 427 bytes
interface GigabitEthernet4/0/19
switchport access vlan 103
switchport mode access
switchport voice vlan 135
authentication event fail action next-method
authentication host-mode multi-auth
authentication order dot1x mab
authentication priority dot1x mab webauth
authentication port-control auto
authentication violation restrict
mab
dot1x pae authenticator
dot1x timeout tx-period 10
spanning-tree portfast
end
ABQT-3FLR-ACC-01#
Mar 31 12:32:14.127: %AAA-3-BADSERVERTYPEERROR: Cannot process accounting server type tacacs+ (UNKNOWN)
ABQT-3FLR-ACC-01#
ABQT-3FLR-ACC-01#sh atuh
ABQT-3FLR-ACC-01#sh atu
ABQT-3FLR-ACC-01#sh authe
ABQT-3FLR-ACC-01#sh authentication se
ABQT-3FLR-ACC-01#sh authentication sessions in
ABQT-3FLR-ACC-01#sh authentication sessions interface gi
ABQT-3FLR-ACC-01#sh authentication sessions interface gigabitEthernet 4/0/19
Interface: GigabitEthernet4/0/19
MAC Address: 0015.c5b4.fd4a
IP Address: 10.1.3.23
User-Name: 00-15-C5-B4-FD-4A
Status: Authz Success
Domain: DATA
Oper host mode: multi-auth
Oper control dir: both
Authorized By: Authentication Server
Vlan Policy: N/A
URL Redirect ACL: ACL-WEBAUTH-REDIRECT
URL Redirect: https://ABQ-TW-ISE-2.abq.gov.qa:8443/guestportal/gateway?sessionId=AC14011F0000018A32B4D906&action=cwa
Session timeout: N/A
Idle timeout: N/A
Common Session ID: AC14011F0000018A32B4D906
Acct Session ID: 0x00000394
Handle: 0x3E00018B
Runnable methods list:
Method State
dot1x Failed over
mab Authc Success -
ISE Guest Portal only redirect HTTPS traffic.
I have a wireless deployment consisting of the following:
5760 WLC & ISE 1.2
Am I missing something here
I have 4 similar deployments, and never had these issues:
On Android / Apple devices, the guest portal does not pop up automatically &
On a Windows Laptop only https traffic directs to the guest portal.
Thanxi think you need to recheck the configuration also check the link for step by step config
http://www.cisco.com/c/en/us/solutions/enterprise/design-zone-security/landing_DesignZone_TrustSec.html -
ISE Guest Portal Failover For New Requests
I have one controller and two ISE 1.2 nodes (primary and secondary) for resiliency, not capacity. Each ISE node has one interface for Management and one interface for Guest Portal. PSN is active on both nodes. The WLC chooses the ISE node (with fallback) for authentication. For guest authentication, the user should be redirected to one of the two Guest Portals. What is the best method for choosing and correctly redirecting the user to the Guest Portal (including when one is down). Is there another/simpler solution than a load-balancer for this scenario. Node Groups are for pending sessions and I need a solution for new sessions.
Thanks.You dont need to do that, once the WLC has deemed a PSN down, new mab requests are sent to the next psn in your radius list on the wlc, and the other psn will reply with its own hostname in the redirect url.
-
ISE Guest Portal - Error Resource not found
Hello,
When I create a guest user through the sponsor portal, then try to login with this guest user through the Guest Portal, after I press login button, the following error message occurs and do not know what to do to solve.
Error: Resource not found.
Resource: /guestportal/
None of the messages on the forum about it helped me to solve the problem.
I am using ISE 1.1.3.124 and this is a new re-image appliance.
Can anyone help?Hello,
As you are not able to get the guest portal, then you need to assure the following things:-
1) Ensure that the two Cisco av-pairs that are configured on the authorization profile should exactly match the example below. (Note: Do not replace the "IP" with the actual Cisco ISE IP address.)
–url-redirect=https://ip:8443/guestportal/gateway?...lue&action=cpp
–url-redirect-acl=ACL-WEBAUTH-REDIRECT (ensure that this ACL is also defined on the access switch)
2) Ensure that the URL redirection portion of the ACL have been applied to the session by entering the show epm session ip command on the switch. (Where the session IP is the IP address that is passed to the client machine by the DHCP server.)
Admission feature : DOT1X
AAA Policies : #ACSACL#-IP-Limitedaccess-4cb2976e
URL Redirect ACL : ACL-WEBAUTH-REDIRECT
URL Redirect :
https://node250.cisco.com:8443/guestportal/gateway?sessionId=0A000A72
0000A45A2444BFC2&action=cpp
3) Ensure that the preposture assessment DACL that is enforced from the Cisco ISE authorization profile contains the following command lines:
remark Allow DHCP
permit udp any eq bootpc any eq bootps
remark Allow DNS
permit udp any any eq domain
remark ping
permit icmp any any
permit tcp any host 80.0.80.2 eq 443 --> This is for URL redirect
permit tcp any host 80.0.80.2 eq www --> Provides access to internet
permit tcp any host 80.0.80.2 eq 8443 --> This is for guest portal
port
permit tcp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8905 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
permit udp any host 80.0.80.2 eq 8906 --> This is for posture
communication between NAC agent and ISE (Swiss ports)
deny ip any any
Note:- Ensure that the above URL Redirect has the proper Cisco ISE FQDN.
4) Ensure that the ACL with the name "ACL-WEBAUTH_REDIRECT" exists on the switch as follows:
ip access-list extended ACL-WEBAUTH-REDIRECT
deny ip any host 80.0.80.2
permit ip any any
5) Ensure that the http and https servers are running on the switch:
ip http server
ip http secure-server
6) Ensure that, if the client machine employs any kind of personal firewall, it is disabled.
7) Ensure that the client machine browser is not configured to use any proxies.
8) Verify connectivity between the client machine and the Cisco ISE IP address.
9) If Cisco ISE is deployed in a distributed environment, make sure that the client machines are aware of the Policy Service ISE node FQDN.
10) Ensure that the Cisco ISE FQDN is resolved and reachable from the client machine.
11) Or you need to do re-image again.
Maybe you are looking for
-
Issue in Data transfers using ALE for E-Recruiting standalone system
Dear Experts, We have an issue in data transfers using ALE. We are having standalone system where E-Recruiting is maintaind seperately and the version is EHP5. When we configured iDoc in Sandbox and its working fine. But when it comes to Dev and Qual
-
okay so my cousin downloaded a bunch of songs to my ipod and i couldnt listen to them so i decided to sync my ipod, i thought everything went well but i guess i was wrong because i saved all my apps to my laptop and my music also. but now i cant get
-
HELP ! NOKIA N8 CAMERA FLASH WONT WORK
Hi All, My three month old Nokia N8 camera flash wont owrk under any light conditions, you can switch it on manually, leave it on auto..... doesnt matter it wont flash. Anyone else found the same problem? any solutuions? kind regards Gippa
-
HT2534 In my iPad the none option is not there then what to do
Please I did it three times but still they want me to pay money even if the application is free then what to do please help me
-
Problems with sound (pulse audio) configuration
My sound system is somehow not working properly. Only one playback at a time is working. Either flash player, a media player, a game. But never both at the same time. I want to use Cinnamon + Pulse Audio. I don't know what I need to install to get it