ISSUE IN CREATING PCR FOR PF NEPAL
Dear Experts,
I am implementing Nepal payroll. As Nepal(NP) country grouping doesn't have any standard payroll solution in SAP. I have copied the same from International Payroll.
Kindly guide me to create the PCR for PF.
I have created a PF basis cumulation wage type /190 with the use of cumulation class 90 and a PF contribution wage type(1APF). Contribution rate is 10% which I managed in T511K.
I have created the following PCR:
ZPF1 PF CALCULATION
1APF
AMT=/190 Set
RTE=KZPPFV Set (T511K contribution rate 10%)
MULTI ARA Multipl.amt/no/rate
ADDWTE* RT Results table
In schema call it with PIT ZPF1 NOAB
But its showing no impact in RT table.
Its my first try for the same. I hope for a valuable guidance of yours.
Thanks & Regards
Bindu.
As far i understand you have not placed the correct logic as mentioned earlier, place below logic in PCR.
ZPF1
ADDWT *
/190
AMT%KZPPFV
ADDWT 1APF
3
ADDWT *
/190
AMT%KZPPFV
ADDWT 1APF
The same i mentioned on Apr 17 2015 08:13 AM use this modify ZPF1 PCR and place then check.
Regards
Venkatesh
Similar Messages
-
Issues while creating implementation for BADI "ME_PROCESS_PO_CUST"
Hi Group,
I have issues while creating implementation for BADI "ME_PROCESS_PO_CUST".
I tried to create implementation for the above mentioned BADI but, I was getting an error like this:
"Interface implementation IF_EX_ME_PROCESS_PO_CUST does not exist".
I want to implement this BADI and so, ideas/views at the earliest will be appreciated.
Please let me know how to overcome this error.
Thanks,
Vishnu.Hi,
Have you activated the class which is implementing the interface? (in transaction SE19 you should see class name)
Best regards,
Wojciech -
Re: Issue while creating Proxy for remote producers
Hi,
I am getting the Same Error , Implementation is Remote WSRP .
Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7001'
java.net.ConnectException: Tried all: '1' addresses, but could not connect over HTTP to server: 'localhost', port: '7001'
at weblogic.net.http.HttpClient.openServer(HttpClient.java:321)
at weblogic.net.http.HttpClient.openServer(HttpClient.java:411)
How the issue was resolved.
Regards
Pramodare you sure that the server hosting the remote portal application is running ?
If yes, can you try the url with your favorite browser : http://localhost:7001/<webapp>/producer?wsdl
You should get the wsdl file.
Emmanuel -
Creating Total for Discoverer Plus 10 Cross Tab
Hi Everyone,
Any known issue in creating total for Discoverer Plus 10g CrossTab?
My Total did not display any value when the there is more than 1 data to be summed.
Anyone encountered this kind of problem before?
Any feedback is greatly appreciated! Thanks
Regards,
AngelineIf attempting to calculate sum as total, try cell sum... If datapoints are a mix of detail and aggregates, try neutral aggregate for detail or better still seperate aggregate from group by items (e.g. in a cross tab worksheet, keep dimensions on the left hand side or page item and only aggregable facts in the datapoint area). Hope this helps.
-
Issue with creating receipts(using interface) for a PO with multiple lines
Hi,
We have a receipts creation program which creates creates receipts.
The issue is, if the PO contains 2 lines then the program creates receipts for only 1 line.Can someone suggest a solution for the same.
Issue in Detail:
The program works as follows
- Populate rcv_header_interface table for Po Line#1 and Line#2
- Populate rcv_transactions_interface table for Po Line#1 and Line#2
- Invoke oracle std 'Receivogn Transaction Processor' program
-Check for Receipt Number generated in the base table rcv_shipment_headers
When we query the rcv_shipment_headers table, we found receipt_number is created for only Line#1.
The data written to interaface table are as follows
rcv_header_interface
header_interface_id - sequence value
GROUP_ID - sequence value
Processing_status_code - 'PENDING'
Receipt_source_code - 'VENDOR'
transaction_type - 'NEW'
vendor_name - <<derived from Po>>
validation_flag -'Y'
expected_receipt_date - current date
WHO clolumns
rcv_transactions_interface
interface_transaction_id - seq value
GROUP_ID - <<as header one>>
header_interface_id - <<header data>>
transaction_type - 'RECEIVE'
transaction_date - current date
processing_status_code - 'PENDING'
processing_mode_code - 'BATCH'
transaction_status_code - 'PENDING'
employee_id - agent Id of PO,
po_header_id - <<derived from Po>>
po_line_id - <<derived from Po>>
po_line_location_id - <<derived from Po>>
validation_flag - 'Y'
source_document_code 'PO',
to_organization_code - NULL,
expected_receipt_date - sysdate + 3
Document_line_num - 1
auto_transact_code - 'DELIVER'
receipt_source_code - 'VENDOR'
vendor_name - <<derived from Po>>
destination_type_code - 'EXPENSE'
document_shipment_line_num - 1
amount - <<derived from Po>>
po_distribution_id - <<derived from Po>>
Have we missed any data tobe inserted into transactrin interface table because of which the transaction processor is geenrating receipt for Line#1 only?
Thanks,
Kamath.Hi,
I have the same problem just now.
Have you found some solutions about it ?
thx
Luigi -
Issue in creating Credit Note for road carrier invoice from SAP TM system
Dear All,
I am facing issue in creating Credit Note for road carrier invoice from SAP TM system.
The following steps I have performed:
1)
1) 1) Create Freight order with Amount 20,100
2) 2) Create Freight Settlement Doc and send it to ECC. Hence PO and SES will be created in ECC with Amount 20,100
3) 3) Invoice verification (MIRO) done w.r.t. FO in ECC with Amount 20,100 and following entries posted :
Carrier A/c - 20,100Cr
GR/IR A/c – 20,100 Dr
4) 4) Created Credit Note in SAP TM against freight order with Amount 1,010 and transfer it to SAP ECC.
5) 5) By this a new PO and SES was created with negative values (with amount 1,010) in SAP ECC
6) 6) In transaction MIRO, Credit Memo was created against the freight order.
7) 7) By this it is showing value 21,110 by adding the line items of Original Purchase Order and Credit Note Purchase Order as 20,100 and 1,010 respectively.
8) 8) By posting this following are the accounting entries which is not correct:
Carrier A/c – 21,110 Dr
GR/IR – 20,100 Cr
GR/IR – 1,010 Cr
9) 9) In report FBL1N which is showing the remaining liability of value 1,010(21,100 – 20,100) instead of 19,090 (20,100-1,010=19,090) for the carrier.
Please suggest how to resolve the issue and get the correct accounting for credit memo?
Regards,
Vibhu GuptaHello,
Like my reply in Linkedin group, I got the same issue and solved with BADI in TM side(REQREQ...).
Regards, Marcelo Lauria -
Creating domain for BI Publisher issue
Hello,
Im trying to create domain for BI Publisher 11.1.1.3.0.
When configuring JDBC there are two component schemas: BIP Schema and OWSM MDS Schema. For database I have MS SQL Server configured with required RCU schemas.
The strange part: when testing the configuration, one fails - the BIP Schema. In the result log I see a very strange ""SELECT 1 FROM DUAL"" test which is obviously for oracle and not MS SQL.
For the 2nd schema, the one with successful test, there is a valid test query.
Please help me understand what am I doing wrong, why is there an Oracle test query for a MS SQL database and finally why on earth only one test fails because for both i have the same database type.
The version of fusion middleware is the one that came with BI installer 11g (11.1.1.3.0)
If wonder why am I doing this manually it is because the BI installer hangs at step 11 Creating Domain for about 100 minutes and then exits with timeout. great programming!
Please give me any hint, advise i can use to make BI Publisher run.
thank you809239 wrote:
Hi Experts,
OBIEE 10.1.3.4.1.
I am able to login bi publisher though Administrator user. But am not able to login remaing users.
I am getting below error.
Oracle BI Publisher Enterprise
Reporting Login: Login failed: Please contact administrator for your username/password.
Error Details
Error Codes:
Please help above issue it is very urgent.
ThaksHi,
Refer to this post to make sure you have all the settings implemented correctly: ( http://onlineappsdba.com/index.php/2009/01/15/oracle-bi-publisher-admin-console-xmlpserver-login-issue-administratoradministrator/ ).
Also, check the log files to see if you can get more detailed error messages.
-Amith. -
When trying to log in with my primary Apple ID and password, I am continuously asked for my pass word without being able to log in. How can I solve this issue, without creating a new Apple ID?
Chewning wrote:
I saved some of my music to a Cloud I can't access. Now, they show up as "Purchased" in iTunes, and I'm not given the option of re-downloading OR repurchasing them.
Music purchased from the iTunes store is not stored in your personal iCloud account, and an iCloud account is not required to redownload them. You should be able to redownload them as explained here: http://support.apple.com/kb/ht2519. If you are unable to, contact iTunes store support for assistance by going to https://expresslane.apple.com ; click ‘iTunes', and then 'iTunes Store', then 'Purchases, Billing & Redemption'. -
Creating invoice for Service PO - IDOC (INVOICE01) issue
Hello Friends,
We are facing a problem with creating invoice for service PO through IDOC (INVOICE01) from supplier portal.
Example: A service PO having one Line item and different service line items, I can successfully create Service entry sheet. Also I can change the tax code for service line items and can successfully create Service entry sheet.
When trying to create Invoice for that PO at 1st time (after creating Service entry sheet) through INVOCE01 (IDOC), It is end up with idoc error (Msg no FF812: Tax code XX also exists)
But the funny thing is , when trying to create Invoice for the same PO at 2nd time it is posting successfully.
Did any one face this problem?
Kindly let me know if there is any solution for this issue.
Thanks.
Regards,
Magesh Basavaraj.Message closed
-
I'm experiencing major synchronisation issues on ICloud, especially for documents created on my Mac in pages, keynote and numbers. Contacts and agenda items work fine. I checked all my account settings. But while I can upload documents from my MAC onto ICloud, they don't show on my IOS devices (whereas previously this worked without issues).
On this Mac I did move all the visible iCloud documents out of iCloud, into another folder, then disabled syncing, exactly as you suggested. But there were, apparently, documents remaining in my Mac's local iCloud store, "~/Library/Mobile Documents/" that I could not see (so could not remove). The Pages file "CSU-PD-UN1.pages" was one such document.
The act of disabling iCloud's document sync'ing, in System Prefs, just renames the local "iCloud" store to "~/Library/Mobile Documents/<appleid#>/" effectively shielding the it from the sync'ing mechanism. Looking at this renamed folder (the screenshot above) revealed that "CSU-PD-UN1.pages" (and other files) had not been removed; it would be reasonable to assume that one, or more, of these "undeletable" files were related to my original problem, and when I re-enabled doc sync'ing, those bad files would just clog up the works again.
So I deleted them with the Finder on both Macs (the other Mac had bad files too, but different ones), then re-enabling sync'ing on the two Macs and doc sync'ing between the Macs (and iCloud.com) appears to now work as intended.
Sadly, iOS devices (iPhone and two iPad) now do not sync at all. Newly created documents do not migrate to any other devices, and documents on other devices do to migrate to the iOS devices.
Your suggestions have certainly done some good, but something is now keeping my iOS devices out of the the iCloud doc sync'ing process. I suspect it's a similar problem as the Macs had ("invisible" files gumming up the works), so I'm going to apply some nasty tricks to explore the iOS devices file system and see if I can find them, and delete them by brue force. -
Issue in creating the standby database from Active database using RMAN
Hi All,
I am facing issue in creating the standby database from Active database using RMAN and getting the below issue after i executed the duplicate command.
Version of Database:11g(11.2.0.1.0)
Operating System:Linux 5
Error:
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of Duplicate Db command at 12/21/2012 17:26:52
RMAN-03015: error occurred in stored script Memory Script
RMAN-04006: error from auxiliary database: ORA-12514: TNS:listener does not currently know of service requested in connect descriptor
Primary Database Entries:
Tnsentry:
SONYPRD =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)(UR=A)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listner Entry:
SID_LIST_SONYPRD =
(SID_LIST =
(SID_DESC =
(SID_NAME = PLSExtproc)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(PROGRAM = extproc)
(SID_DESC =
(SID_NAME = SONYPRD)
(GLOBAL_DBNAME = SONYPRD)
Auxiliary Details:
Tns Entry:
SONYPRD =
(DESCRIPTION =
# (ADDRESS = (PROTOCOL = TCP)(HOST = oracle11g.localdomain)(PORT = 1521))
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprd.localdomain)
SONYPRDSTBY =
(DESCRIPTION =
(ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521))
(CONNECT_DATA =
(SERVER = DEDICATED)
(SERVICE_NAME = sonyprdstby)(UR=A)
Listener Entry in auxiliary:
SID_LIST_SONYPRDSTBY =
(SID_LIST =
(SID_DESC =
(GLOBAL_DBNAME = SONYPRDSTBY)
(ORACLE_HOME = /u01/app/oracle/product/11.2.0/dbhome_1)
(SID_NAME = SONYPRDSTBY)
TNSPING from Primary DB:
[oracle@oracle11g ~]$ tnsping sonyprdstby
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:39:28
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
/u01/app/oracle/product/11.2.0/dbhome_1/network/admin/sqlnet.ora
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.132)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprdstby)(UR=A)))
OK (0 msec)
TNSPING from Auxuliary server
[oracle@oracle11gstby ~]$ tnsping sonyprd
TNS Ping Utility for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 17:40:19
Copyright (c) 1997, 2009, Oracle. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS = (PROTOCOL = TCP)(HOST = 192.168.20.131)(PORT = 1521)) (CONNECT_DATA = (SERVER = DEDICATED) (SERVICE_NAME = sonyprd.localdomain)))
OK (10 msec)
Script Used for duplicate:
run {
allocate channel prmy1 type disk;
allocate channel prmy2 type disk;
allocate channel prmy3 type disk;
allocate channel prmy4 type disk;
allocate auxiliary channel stby type disk;
duplicate target database for standby from active database
spfile
parameter_value_convert 'sonyprd','sonyprdstby'
set db_unique_name='sonyprdstby'
set db_file_name_convert='/sonyprd/','/sonyprdstby/'
set log_file_name_convert='/sonyprd/','/sonyprdstby/'
set control_files='/u01/app/oracle/oradata/control01.ctl'
set log_archive_max_processes='5'
set fal_client='sonyprdstby'
set fal_server='sonyprd'
set standby_file_management='AUTO'
set log_archive_config='dg_config=(sonyprd,sonyprdstby)'
set log_archive_dest_2='service=sonyprd ASYNC valid_for=(ONLINE_LOGFILE,PRIMARY_ROLE) db_unique_name=sonyprd'
Tried the script from both Primary and auxiliary but no luck
[oracle@oracle11gstby admin]$ rman target sys/welcome@sonyprd auxiliary sys/*****@sonyprdstby
Recovery Manager: Release 11.2.0.1.0 - Production on Fri Dec 21 17:26:24 2012
Copyright (c) 1982, 2009, Oracle and/or its affiliates. All rights reserved.
connected to target database: SONYPRD (DBID=3131093559)
connected to auxiliary database: SONYPRD (not mounted)
Listener Status from primary:
[oracle@oracle11g ~]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:08:56
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 20-DEC-2012 17:42:17
Uptime 1 days 0 hr. 26 min. 41 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/localhost/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=ipc)(KEY=EXTPROC1521)))
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=localhost.localdomain)(PORT=1521)))
Services Summary...
Service "sonyprd.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
Service "sonyprdXDB.localdomain" has 1 instance(s).
Instance "sonyprd", status READY, has 1 handler(s) for this service...
The command completed successfully
Listener Status from Standby when database bring to Nomount state:
[oracle@oracle11gstby admin]$ lsnrctl status
LSNRCTL for Linux: Version 11.2.0.1.0 - Production on 21-DEC-2012 18:11:54
Copyright (c) 1991, 2009, Oracle. All rights reserved.
Connecting to (ADDRESS=(PROTOCOL=tcp)(HOST=)(PORT=1521))
STATUS of the LISTENER
Alias LISTENER
Version TNSLSNR for Linux: Version 11.2.0.1.0 - Production
Start Date 21-DEC-2012 16:13:47
Uptime 0 days 1 hr. 58 min. 6 sec
Trace Level off
Security ON: Local OS Authentication
SNMP OFF
Listener Parameter File /u01/app/oracle/product/11.2.0/dbhome_1/network/admin/listener.ora
Listener Log File /u01/app/oracle/diag/tnslsnr/oracle11gstby/listener/alert/log.xml
Listening Endpoints Summary...
(DESCRIPTION=(ADDRESS=(PROTOCOL=tcp)(HOST=oracle11gstby)(PORT=1521)))
Services Summary...
Service "sonyprdstby" has 1 instance(s).
Instance "sonyprdstby", status BLOCKED, has 1 handler(s) for this service...
The command completed successfully
Please provide any work arounds to proceed further in creating the standby database.
Thanks,
Ram.Pl do not post duplicates - Issue in configuring Standby Database from Active database in 11g by RMAN
-
Issue in creating OPSS Schema with rcu.
Hi,
There is an issue in creating the OPSS schema in oracle DB 11.2.0.3.0 even though the rcu (Oracle Fusion Middleware Repository Creation Utility 11g (11.1.2.1.0)
completed it without any error with status of success opss schema at the end of it's creation operation.
But the validation of opss schema is getting Failed as shown by this query ! I 've refferenced this Doc's Configuring the OPSS Security Store
SQL> desc jps_dn;
ERROR:
ORA-04043: object jps_dn does not exist
There is no error in rcu log And in opss.log as well. Also There is NO issue in createing the Other schema's like OIM,OAM,OAAM
Wonder what am missing here that causing the shema not reflecting or Validation of it getting Failed in the database.
Also i 've tried by changing this sec_case_sensitive_logon value to False from true in the DB but to no effect.
in both cases the OPSS schema validation is getting failed.
Greately appreciate any suggestion.
Please see the following summary of rcu operation
Repository Creation Utility: Create - Completion Summary
Database details:
Host Name : ebs.oracle.com
Port : 1521
Service Name : IAM.ORACLE.COM
Connected As : sys
Prefix for (prefixable) Schema Owners : DEV
RCU Logfile : /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/rcu.log
Component schemas created:
Component Status Logfile /data/Rootdownloads/rcuHome/rcu/log/logdir.2013-09-25_04-57/opss.log
Oracle Platform Security Services Success
Please suggest.
Thanks
PriyaHi,
Thanks for the response Hussein and Helios,
I am able to solve the issue as it was due to incorrect rcu version.
But I am really struggling to Configure Policy store for the last 10 days with the following Error. I would be highly obliged if you could guide me on this issue.
I am getting stuck at this Error while running configureSecurityStore.py. for the error I 've refferenced these Metalink Note ID's
But to No Avail.
configureSecurityStore.py Fails With ORA-00001: unique constraint (DEV_OPSS.IDX_JPS_RDN_PDN) violated. (Doc ID 1547423.1) (1549203.1)
Summarining
The steps that I 've followed
1. Created the Schema's Using rcu 11g (11.1.2.0.0) on 11.2.0.3.0 Oracle DB. (OS :RHEL 64 bit)
2. Insatlled Weblogic 10.3.6
3. Installed Oracle Identity and Access Management 11g (11.1.2.0.0) And SOA 11.1.1.7.0
4. Run config.sh to create OIM,OAM and OAAM domains
5. Run setDomainEnv.sh from user_projects/domains//bin
After that I tried to Configure the DB Policy store before starting the Admin Server. But getting the same error. every time it get failed
I 've dropped schemas and Reinstall the WLS,IAM,SOA software again But got the same Error.
at least 20 times in the last 10 days I 've Dropped schema even created New DB and Reinstalled All the IAM Software But to No Avail
Please see the following Exact Error. And I would be highly Obliged if you could drop few lines as what I am missing here in the entire process.
[oracle@ebs Middleware]$ /oracle/Middleware/oracle_common/common/bin/wlst.sh /oracle/Middleware/Oracle_IAM/common/tools/configureSecurityStore.py -d /oracle/Middleware/user_projects/domains/IAMDomain/ -c IAM -p welcome1 -m create
CLASSPATH=/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar:/oracle/Middleware/patch_wls1036/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/Middleware/patch_ocp371/profiles/default/sys_manifest_classpath/weblogic_patch.jar:/oracle/jdk1.6.0_30/lib/tools.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic_sp.jar:/oracle/Middleware/wlserver_10.3/server/lib/weblogic.jar:/oracle/Middleware/modules/features/weblogic.server.modules_10.3.6.0.jar:/oracle/Middleware/wlserver_10.3/server/lib/webservices.jar:/oracle/Middleware/modules/org.apache.ant_1.7.1/lib/ant-all.jar:/oracle/Middleware/modules/net.sf.antcontrib_1.1.0.0_1-0b2/lib/ant-contrib.jar::/oracle/Middleware/oracle_common/modules/oracle.jrf_11.1.1/jrf-wlstman.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adfscripting.jar:/oracle/Middleware/oracle_common/common/wlst/lib/adf-share-mbeans-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/lib/mdswlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/auditwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/igfwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jps-wls-trustprovider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/jrf-wlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/oamAuthnProvider.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap_help.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ossoiap.jar:/oracle/Middleware/oracle_common/common/wlst/resources/ovdwlsthelp.jar:/oracle/Middleware/oracle_common/common/wlst/resources/sslconfigwlst.jar:/oracle/Middleware/oracle_common/common/wlst/resources/wsm-wlst.jar:/oracle/Middleware/utils/config/10.3/config-launch.jar::/oracle/Middleware/wlserver_10.3/common/derby/lib/derbynet.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbyclient.jar:/oracle/Middleware/wlserver_10.3/common/derby/lib/derbytools.jar::
Initializing WebLogic Scripting Tool (WLST) ...
Welcome to WebLogic Server Administration Scripting Shell
Type help() for help on available commands
Info: Data source is: opss-DBDS
Info: DB JDBC driver: oracle.jdbc.OracleDriver
Info: DB JDBC URL: jdbc:oracle:thin:@ebs.oracle.com:1521/iam.oracle.com
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSetup - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
Sep 26, 2013 1:35:36 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] seedSchemaAndCreateDIT - done
Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
INFO: Migration of Credential Store data in progress.....
Sep 26, 2013 1:35:40 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationCredImpl migrateCredentialData
INFO: Migration of Credential Store data completed, Time taken for migration is 00:00:00
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] testJpsService - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] checkServiceSetup - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
Sep 26, 2013 1:35:41 AM oracle.security.jps.internal.config.ldap.LdapKeyStoreServiceConfigurator schemaCompatibleHandler
INFO: Keystore schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] seedSchemaAndCreateDIT - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbKeyStoreServiceConfigurator] testJpsService - done
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] checkServiceSetup - done
Sep 26, 2013 1:35:45 AM oracle.security.jps.internal.config.ldap.LdapPolicyStoreServiceConfigurator schemaCompatibleHandler
INFO: Policy schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] seedSchemaAndCreateDIT - done
WLS ManagedService is not up running. Fall back to use system properties for configuration.
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
INFO: Migration of Admin Role Members started
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.destination.apibased.JpsDstPolicy migrateDataInternal
INFO: Migration of Admin Role Members completed in 00:00:00
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbPolicyStoreServiceConfigurator] testJpsService - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] checkServiceSetup - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.config.ldap.LdapAuditServiceConfigurator schemaCompatibleHandler
INFO: Audit store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] seedSchemaAndCreateDIT - done
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.audit.AuditServiceImpl registerInternal
WARNING: Cannot register to audit service for component "JPS".
Sep 26, 2013 1:36:00 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
INFO: Migration of Audit Store data in progress.....
Sep 26, 2013 1:36:51 AM oracle.security.jps.internal.tools.utility.JpsUtilMigrationAuditStoreImpl migrateAuditStoreData
INFO: Migration of Audit Store data completed, Time taken for migration is 00:00:50
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] migrateData - done
[oracle.security.jps.internal.config.db.DbAuditStoreServiceConfigurator] testJpsService - done
persist to output: /oracle/Middleware/user_projects/domains/IAMDomain/config/fmwconfig - done
INFO: Found persistence provider "org.eclipse.persistence.jpa.PersistenceProvider". OpenJPA will not be used.
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSetup - done
Sep 26, 2013 1:36:55 AM oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator schemaCompatibleHandler
INFO: Credential store schema upgrade not required. Store Schema version 11.1.1.6.0 is compatible to the seed schema version 11.1.1.4.0
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] checkServiceSchema - Store schema has been seeded completely
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] updateServiceConfiguration - done
[oracle.security.jps.internal.config.db.DbCredStoreServiceConfigurator] seedSchemaAndCreateDIT - failed JPS-10000: There was an internal error in the policy store.
Exception in thread "main" java.lang.RuntimeException: JPS-10000: There was an internal error in the policy store.
oracle.security.jps.internal.api.common.JpsCredentialStoreLdapNodeCreationException: JPS-10000: There was an internal error in the policy store.
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:303)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.addServiceStoreBase(LdapCredStoreServiceConfigurator.java:113)
at oracle.security.jps.internal.config.ldap.LdapCredStoreServiceConfigurator.seedSchemaAndCreateDIT(LdapCredStoreServiceConfigurator.java:142)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.runConfiguration(LdapServiceEnabler.java:484)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureCredentialStoreService(LdapServiceEnabler.java:232)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.configureSecurityServices(LdapServiceEnabler.java:170)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:129)
Caused by: oracle.security.jps.service.policystore.PolicyStoreConnectivityException: JPS-10000: There was an internal error in the policy store.
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.handleRollbackException(JpsDBDataManager.java:1345)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1508)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransactionInDoAs(JpsDBDataManager.java:1475)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.commitTransaction(JpsDBDataManager.java:1466)
at oracle.security.jps.internal.common.rdbms.util.JpsDbBootstrapImpl.createJpsCredentailStoreInLdap(JpsDbBootstrapImpl.java:296)
... 6 more
Caused by: javax.persistence.RollbackException: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
Error Code: 1
Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
bind => [3 parameters bound]
Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
objectclass = top, EntryId = 11437:Attribute RowId = 45350
objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
cn = CredentialStore]})
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:102)
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commit(EntityTransactionImpl.java:63)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager$8.run(JpsDBDataManager.java:1487)
at oracle.security.jps.internal.policystore.rdbms.JpsDBDataManager.internalCommitTxn(JpsDBDataManager.java:1492)
... 9 more
Caused by: Exception [EclipseLink-4002] (Eclipse Persistence Services - 2.3.1.v20111018-r10243): org.eclipse.persistence.exceptions.DatabaseException
Internal Exception: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
Error Code: 1
Call: INSERT INTO JPS_DN (ENTRYID, PARENTDN, RDN) VALUES (?, ?, ?)
bind => [3 parameters bound]
Query: InsertObjectQuery(EntryId=11437:rdn=cn=credentialstore:pdn=cn=jpsroot,cn=jpscontext,cn=iam,: JpsStore Entry={[EntryId = 11437:Attribute RowId = 45348
dn = cn=CredentialStore,cn=IAM,cn=JPSContext,cn=jpsroot, EntryId = 11437:Attribute RowId = 45349
objectclass = top, EntryId = 11437:Attribute RowId = 45350
objectclass = orclContainer, EntryId = 11437:Attribute RowId = 45351
cn = CredentialStore]})
at org.eclipse.persistence.exceptions.DatabaseException.sqlException(DatabaseException.java:324)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:840)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeNoSelect(DatabaseAccessor.java:906)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.basicExecuteCall(DatabaseAccessor.java:592)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeCall(DatabaseAccessor.java:535)
at org.eclipse.persistence.internal.sessions.AbstractSession.basicExecuteCall(AbstractSession.java:1717)
at org.eclipse.persistence.sessions.server.ClientSession.executeCall(ClientSession.java:253)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:207)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.executeCall(DatasourceCallQueryMechanism.java:193)
at org.eclipse.persistence.internal.queries.DatasourceCallQueryMechanism.insertObject(DatasourceCallQueryMechanism.java:342)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:162)
at org.eclipse.persistence.internal.queries.StatementQueryMechanism.insertObject(StatementQueryMechanism.java:177)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.insertObjectForWrite(DatabaseQueryMechanism.java:472)
at org.eclipse.persistence.queries.InsertObjectQuery.executeCommit(InsertObjectQuery.java:80)
at org.eclipse.persistence.queries.InsertObjectQuery.executeCommitWithChangeSet(InsertObjectQuery.java:90)
at org.eclipse.persistence.internal.queries.DatabaseQueryMechanism.executeWriteWithChangeSet(DatabaseQueryMechanism.java:287)
at org.eclipse.persistence.queries.WriteObjectQuery.executeDatabaseQuery(WriteObjectQuery.java:58)
at org.eclipse.persistence.queries.DatabaseQuery.execute(DatabaseQuery.java:844)
at org.eclipse.persistence.queries.DatabaseQuery.executeInUnitOfWork(DatabaseQuery.java:743)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWorkObjectLevelModifyQuery(ObjectLevelModifyQuery.java:108)
at org.eclipse.persistence.queries.ObjectLevelModifyQuery.executeInUnitOfWork(ObjectLevelModifyQuery.java:85)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.internalExecuteQuery(UnitOfWorkImpl.java:2871)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1516)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1498)
at org.eclipse.persistence.internal.sessions.AbstractSession.executeQuery(AbstractSession.java:1449)
at org.eclipse.persistence.internal.sessions.CommitManager.commitNewObjectsForClassWithChangeSet(CommitManager.java:224)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsForClassWithChangeSet(CommitManager.java:191)
at org.eclipse.persistence.internal.sessions.CommitManager.commitAllObjectsWithChangeSet(CommitManager.java:136)
at org.eclipse.persistence.internal.sessions.AbstractSession.writeAllObjectsWithChangeSet(AbstractSession.java:3799)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabase(UnitOfWorkImpl.java:1415)
at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitToDatabase(RepeatableWriteUnitOfWork.java:636)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitToDatabaseWithChangeSet(UnitOfWorkImpl.java:1505)
at org.eclipse.persistence.internal.sessions.RepeatableWriteUnitOfWork.commitRootUnitOfWork(RepeatableWriteUnitOfWork.java:267)
at org.eclipse.persistence.internal.sessions.UnitOfWorkImpl.commitAndResume(UnitOfWorkImpl.java:1143)
at org.eclipse.persistence.internal.jpa.transaction.EntityTransactionImpl.commitInternal(EntityTransactionImpl.java:84)
... 12 more
Caused by: java.sql.SQLIntegrityConstraintViolationException: ORA-00001: unique constraint (DEV1_OPSS.IDX_JPS_RDN_PDN) violated
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:445)
at oracle.jdbc.driver.T4CTTIoer.processError(T4CTTIoer.java:396)
at oracle.jdbc.driver.T4C8Oall.processError(T4C8Oall.java:879)
at oracle.jdbc.driver.T4CTTIfun.receive(T4CTTIfun.java:450)
at oracle.jdbc.driver.T4CTTIfun.doRPC(T4CTTIfun.java:192)
at oracle.jdbc.driver.T4C8Oall.doOALL(T4C8Oall.java:531)
at oracle.jdbc.driver.T4CPreparedStatement.doOall8(T4CPreparedStatement.java:207)
at oracle.jdbc.driver.T4CPreparedStatement.executeForRows(T4CPreparedStatement.java:1044)
at oracle.jdbc.driver.OracleStatement.doExecuteWithTimeout(OracleStatement.java:1329)
at oracle.jdbc.driver.OraclePreparedStatement.executeInternal(OraclePreparedStatement.java:3593)
at oracle.jdbc.driver.OraclePreparedStatement.executeUpdate(OraclePreparedStatement.java:3674)
at oracle.jdbc.driver.OraclePreparedStatementWrapper.executeUpdate(OraclePreparedStatementWrapper.java:1354)
at org.eclipse.persistence.internal.databaseaccess.DatabaseAccessor.executeDirectNoSelect(DatabaseAccessor.java:831)
... 45 more
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.throwExceptionWithStackTrace(LdapServiceEnabler.java:145)
at oracle.security.jps.internal.tools.configuration.ldap.LdapServiceEnabler.main(LdapServiceEnabler.java:137)
Error: Failed to initialize security store.
Error: Create operation has failed.
[oracle@ebs Middleware]$
Also OPSS schema is FIne as it's get validated by this query.
SQL> select * from JPS_DN where rdn like '%cn=credentialstore%';
ENTRYID
RDN
PARENTDN
3004
cn=credentialstore
cn=oracleschemaversion,cn=opss,
5004
cn=credentialstore
cn=jpsroot,cn=jpscontext,cn=iam,
ENTRYID
RDN
PARENTDN
Please suggest.
Thanks
Priya -
Issue in creating dev plan in talent management specialist role
Hi ,
I am facing issue in creating development plan through talent management specialist role . Actually in one system I have 2 location one is india & another one is USA . its working for india but when I search india employee its show no employee found . can you please guide me
TarunHi Luke ,
According to one of your article , I run HRALXSYNC in r/3 , in that all indian employee are green but USA employee in RED . I found following error , can you please guide me that what is mean by that ?
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Serious error; see log
The error occurred in program CL_HRRCF_INFOTYPE=============CM003 line 117
Qualification 90007487 does not exist
The incorrect HR object has the key 01NA90011026
The incorrect infotype record is 40601NA900110265105 1 1900010199991231
The error occurred in program CL_HRRCF_QUALIFICATION========CM001 line 69
Serious error; see log
The error occurred in program CL_HRRCF_CANDIDATE_INFOTYPE_BLCM00B line 99
Thanks
Tarun -
Issue while creating repair order via IW52
Hi All,
I am facing an issue while creating a repair order from Service Notification.
In IW52 for service Notification , we have option of Create repair order in Action box of service notification, when i am clicking that i need to enter the sales order type.. when i am selecting standard order type KD01 or any other it is saying that
1)Order type KD01 does not have the sales doc. identifier "repair"
Message no. QM127
Diagnosis
You entered an order type that is not assigned to the sales document identifier "F" or "G" = repair order.
Procedure
Enter an order type that has the sales document identifier "F" or "G".
Where can we see sales document identifier in config ?
2. I would like know is there any setting where we can give default sales order type to service notification type ..
regards
giriDear,
Thanks for your inputs. It will be great help if you can let me know the below :
1) Diff between Repair order, spare parts order..
2)I happened to create a service order from a sales order following IDES Model for CS -4.6C / the service order type created is SM01 is created and my sales order type is OR .. now my question is there any setting where we assign Service order type to sales order type ???
Note :- In OIOL Tcode for SM01 Order type i have IRC Sales order document type linked ..
regards
giri -
Performance issues when creating a Report / Query in Discoverer
Hi forum,
Hope you are can help, it involves a performance issues when creating a Report / Query.
I have a Discoverer Report that currently takes less than 5 seconds to run. After I add a condition to bring back Batch Status that = Posted we cancelled the query after reaching 20 minutes as this is way too long. If I remove the condition the query time goes back to less than 5 seconds.
Please see attached the SQL Inspector Plan:
Before Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
AND-EQUAL
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N2
INDEX RANGE SCAN GL.GL_CODE_COMBINATIONS_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_N1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
After Condition
SELECT STATEMENT
SORT GROUP BY
VIEW SYS
SORT GROUP BY
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
NESTED LOOPS
NESTED LOOPS OUTER
NESTED LOOPS
TABLE ACCESS FULL GL.GL_JE_BATCHES
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_HEADERS
INDEX RANGE SCAN GL.GL_JE_HEADERS_N1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
INDEX UNIQUE SCAN GL.GL_ENCUMBRANCE_TYPES_U1
INDEX UNIQUE SCAN GL.GL_DAILY_CONVERSION_TYPES_U1
INDEX UNIQUE SCAN GL.GL_BUDGET_VERSIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_SOURCES_TL
INDEX UNIQUE SCAN GL.GL_JE_SOURCES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_CATEGORIES_TL_U1
INDEX UNIQUE SCAN GL.GL_JE_BATCHES_U1
TABLE ACCESS BY INDEX ROWID GL.GL_JE_LINES
INDEX RANGE SCAN GL.GL_JE_LINES_U1
INDEX UNIQUE SCAN GL.GL_SETS_OF_BOOKS_U2
TABLE ACCESS BY INDEX ROWID GL.GL_CODE_COMBINATIONS
INDEX UNIQUE SCAN GL.GL_CODE_COMBINATIONS_U1
TABLE ACCESS BY INDEX ROWID GL.GL_PERIODS
INDEX RANGE SCAN GL.GL_PERIODS_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUES_N1
INDEX RANGE SCAN APPLSYS.FND_FLEX_VALUE_NORM_HIER_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUES_TL
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUES_TL_U1
TABLE ACCESS BY INDEX ROWID APPLSYS.FND_FLEX_VALUE_SETS
INDEX UNIQUE SCAN APPLSYS.FND_FLEX_VALUE_SETS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
INDEX UNIQUE SCAN GL.GL_JE_HEADERS_U1
Is there anything i can do in Discoverer Desktop / Administration to avoid this problem.
Many thanks,
LanceHi Rod,
I've tried the condition (Batch Status||'' = 'Posted') as you suggested, but the qeury time is still over 20 mins. To test i changed it to (Batch Status||'' = 'Unposted') and the query was returned within seconds again.
Ive been doing some more digging and have found the database view that is linked to the Journal Batches folder. See below.
I think the problem is with the column using DECODE. When querying the column in TOAD the value of P is returned. But in discoverer the condition is done on the value Posted. Im not too sure how DECODE works, but think this could be the causing some sort of issue with Full Table Scans. How do we get around this?
Lance
DECODE( JOURNAL_BATCH1.STATUS,
'+', 'Unable to validate or create CTA',
'+*', 'Was unable to validate or create CTA',
'-','Invalid or inactive rounding differences account in journal entry',
'-*', 'Modified invalid or inactive rounding differences account in journal entry',
'<', 'Showing sequence assignment failure',
'<*', 'Was showing sequence assignment failure',
'>', 'Showing cutoff rule violation',
'>*', 'Was showing cutoff rule violation',
'A', 'Journal batch failed funds reservation',
'A*', 'Journal batch previously failed funds reservation',
'AU', 'Showing batch with unopened period',
'B', 'Showing batch control total violation',
'B*', 'Was showing batch control total violation',
'BF', 'Showing batch with frozen or inactive budget',
'BU', 'Showing batch with unopened budget year',
'C', 'Showing unopened reporting period',
'C*', 'Was showing unopened reporting period',
'D', 'Selected for posting to an unopened period',
'D*', 'Was selected for posting to an unopened period',
'E', 'Showing no journal entries for this batch',
'E*', 'Was showing no journal entries for this batch',
'EU', 'Showing batch with unopened encumbrance year',
'F', 'Showing unopened reporting encumbrance year',
'F*', 'Was showing unopened reporting encumbrance year',
'G', 'Showing journal entry with invalid or inactive suspense account',
'G*', 'Was showing journal entry with invalid or inactive suspense account',
'H', 'Showing encumbrance journal entry with invalid or inactive reserve account',
'H*', 'Was showing encumbrance journal entry with invalid or inactive reserve account',
'I', 'In the process of being posted',
'J', 'Showing journal control total violation',
'J*', 'Was showing journal control total violation',
'K', 'Showing unbalanced intercompany journal entry',
'K*', 'Was showing unbalanced intercompany journal entry',
'L', 'Showing unbalanced journal entry by account category',
'L*', 'Was showing unbalanced journal entry by account category',
'M', 'Showing multiple problems preventing posting of batch',
'M*', 'Was showing multiple problems preventing posting of batch',
'N', 'Journal produced error during intercompany balance processing',
'N*', 'Journal produced error during intercompany balance processing',
'O', 'Unable to convert amounts into reporting currency',
'O*', 'Was unable to convert amounts into reporting currency',
'P', 'Posted',
'Q', 'Showing untaxed journal entry',
'Q*', 'Was showing untaxed journal entry',
'R', 'Showing unbalanced encumbrance entry without reserve account',
'R*', 'Was showing unbalanced encumbrance entry without reserve account',
'S', 'Already selected for posting',
'T', 'Showing invalid period and conversion information for this batch',
'T*', 'Was showing invalid period and conversion information for this batch',
'U', 'Unposted',
'V', 'Journal batch is unapproved',
'V*', 'Journal batch was unapproved',
'W', 'Showing an encumbrance journal entry with no encumbrance type',
'W*', 'Was showing an encumbrance journal entry with no encumbrance type',
'X', 'Showing an unbalanced journal entry but suspense not allowed',
'X*', 'Was showing an unbalanced journal entry but suspense not allowed',
'Z', 'Showing invalid journal entry lines or no journal entry lines',
'Z*', 'Was showing invalid journal entry lines or no journal entry lines', NULL ),
Maybe you are looking for
-
I could use the opposite of "Get Image Subset.vi", like a "Set Image Subset.vi". The "Draw Flattened Pixmap" function would work if it would let me define the target position instead of the source position. Solved! Go to Solution.
-
gurus, if you have two isupplier server(separate server and one embeded with the form server) and you did the jpximporter, copied the files on both servers but bounce only one of it. Is it possible that you would get "view definition not found"? Do i
-
My headset is paired ,but not connected
My headset is paired but it is not connected,can anybody help please
-
my nokia n95 is chargeing all day and all night can someone help please :-(
-
Where I can find these definitions from?
I don't know where these definitions like File,Path come from? If I write the C file that CIN generated,I am afraid that I can't get. Attachments: filewrit.c 2 KB filewrit.vi 13 KB