Issue in Running the Assesement Cycle after upgrade.
Hi
We have a Z Transaction Code for running actual assessment. We have migrated to ECC 6.0 from 4.6C. In the standard T Code KSU5, system was giving the message GA 627
"For the execution of assessments, distributions, periodic repostings or indirect activity allocations in the CO-OM application, groups have to be defined in the current client which summarize all actual or planned transactions. In the current client, these groups are either not available or do not have the latest status."
I have run the report RK811XST and now I am able to run KSU5 in the system. However, for ZKSU5, the same issue persists. Please advise
Regards
Sanil K Bhandari
Hi Sanil
Try to run the report RK811XUP as well.
What happens us when you run the report, it creates some basic sets like 0HC0_VRG*
I dont know which sets are called for in your Z transaction... But, I guess whatever error message it gives in case of ZKSU5, it should also be giving you the program that needs to be run... Did you try executing that and still it gives you error msg?
Ajay M
Similar Messages
-
Hi i am getting an error like this while installing Live Cycle Server " The file merge_modules\lc11_common_iam_zip does not exist This file is required sucessfullly run the Live Cycle Installer.Can any one help me on resolving this issue it would be of great help..thanks .
I think in your situation it would be worth trying the things listed under the event. It does have to do with FRS and it's easy to do. I've used it to fix journal errors after a server unexpectedly restarts and sysvol stops replicating. I
could see where it could fix your issue, and if it doesn't, you're out 5 minutes. :)
The listed registry key does not exist
Expand HKEY_LOCAL_MACHINE.
Click down the key path:
"System\CurrentControlSet\Services\NtFrs\Parameters"
Double click on the value name
"Enable Journal Wrap Automatic Restore"
-
Unable to get the login page after upgrade from 11.5.10.2 to R12
Hi ,
We are unable to get the login page after upgrade from 11.5.10.2 to R12, all the services are up and running.
Pls let me know if someone has come across this issue.
Thanks&Regards,
Apps DBAHi ,
After compile JSP files manually , now we are facing problem after logging.
Error : You have encountered an unexpected error.
Thanks&Regards,
Apps DBA -
Stuck in a "loop" at the login window after upgrading to Leopard
I bought a new iMac Oct 26. It contained Tiger, and included a disk for installing Leopard. I easily got the machine up and running using Tiger, but last night I attempted to install Leopard. When the installation was complete, I tried to get it running. A screen asking for my password came up. I keyed that in and hit logon. Back came the screen asking for the password. To make long story short, I tried everything I could last night, and then called Apple Support this morning. Took quite a while, but I was back in business this afternoon. The technician who helped me sent me the email copied below describing the solution. Perhaps it will help someone else? Romelle
Hello from Apple!
Charles at Apple Service & Support thought that you might find this article useful. We hope that it helps resolve your technical issue.
Link: http://www.info.apple.com/kbnum/n306965
Mac OS X 10.5, iMac (Late 2007): Stuck in a "loop" at the login window after upgrading to Leopard
Issue or symptom
After installing Mac OS X 10.5 Leopard on a 20-inch or 24-inch iMac (Late 2007) computer, you may not be able to log in at the login window. Your login name and password are apparently accepted, but after a blue screen appears for a few seconds, the login window reappears instead of your desktop.
Products affected
20-inch or 24-inch iMac (Late 2007) computer with 2.0, 2.4, or 2.8 GHz processors
Mac OS X 10.5 Leopard
Solution
If Leopard is installed
Start up from the Leopard Install DVD and perform an Archive and Install installation (and select Preserve Users and Network Settings).
After the Archive and Install is complete, you should be able to successfully log in. Use Software Update to install any other updates.
Important: Install the iMac Software Update 1.3 for Leopard after the Archive and Install is complete.
If Leopard is not yet installed
If you have not yet installed Leopard on your 20-inch or 24-inch aluminum iMac computer with a 2.0, 2.4, or 2.8 GHz processor running Mac OS X 10.4.x, but previously installed the iMac Software Update 1.2, you should install the iMac Software Update 1.2.1 (Tiger) or later, before installing Leopard.
Thank you,
AppleIf Leopard came pre-installed and this is a new machne, then the disks that came in the box should let you archive install preserving users & network settings. The disks have a grey label, and if you get more than one use disk #1 for this procedure.
Hold down the "option" (also known as "alt" on the new keyboards) key when starting up with disk #1 in the optical drive. Select the install disk icon on the grey screen and click the arrow. Then when you get to the "select destination pane, click the options button after selecting your hard drive as the destination. In options A& I preserving should be checked by default, if not, select them. Click "ok" to dismiss the options pane, then run the installation.
If this does not work for you, call apple support. They want everything to work. Be patient, they are real busy these days.
Slim -
Issue when running acutal Off-cycle payroll in India!
Dear experts!
I have an urgent issue when running ACTUAL off-cycle payroll in India as below: "Payroll already performed once in future".
In testing mode, everything is fine. I have tried to check payroll result in pc_payresult and pu01, and Infotype 3. All of them show the last payroll in 31.07.2011. But now I run off-cycle payroll on 20.08.2011, this error is displayed. So I cannot run actual payroll for them.
Please help me! I am really appreciated.
Regards!
Woody.Hello
Normally this error message reflects an inconsistency in the payroll
directory cluster, that you can view via RPUDIR00. What you can do to
restore the consistency is to run the report RPUDIR00 for this pernr
with the following parameters on the selection screen:
Payroll for country
Personnel number
Compare directory
Payroll results structure
detailed log
Save new directory X < this will write the new directory. If you want to test first, do not select this parameter.
Afterwards it should be possible to run payroll for this employee.
Thanks and Kind Regards
Ramana -
SAP B1 APPLICATION IS RUNNING SLOW IN SERVER AFTER UPGRADE
Hi,
The sap application is running slow in server after upgrading it from 9.0 to 9.1 it's taking 5-10 secs to open a document after clicking it and its taking more time in client system.
what are the steps to be taken so that the application will run without any delay.
Regards,
Karthik Bhi please check bellow thread ,it may help you
Client Machines Logon to SAP Server is Very Slow
update the status
regards
AKR -
Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?
Why the iPhone 4 16GB drains out the battery faster after upgrading to ios 5?
Not sure, but try this:
Let the battery drain to below 20% (I went to about 14%).
Plug your phone in and leave it to charge COMPLETELY. This took my phone somewhere around 4 hours to complete.
When you're done, you may have better luck keeping a charge.
iOS 5 adds a lot of additional communication, and every time you connect wirelessly to anything, more power is used. Even so, some people report that a battery cycle like this helps. It seems to have worked for me. -
I have a Sony radio in my car. With IOS 4 on my IPhone I could use the docking plug to the usb input on the radio and stream ESPN radio or pandora to the radio. After upgrading to IOS 5 on the phone the Sony radio will not recognize the phone . Any thoughts.
I am reading on this site about the error I am getting and it wants me to change some files that I am not comfortable messing with. Mainly because it is like a foreign language. Will the store do this for me or tell me if it is neccessary?
-
my Iphone5 does not show the picture location after upgrading to ios 7.0.4 - why?
I change Settings>Privacy>Location Services>Camera to OFF and then ON and the locations start to appear !!!!.
It seems to be Apple bug.
Thanks for you efforts -
Why does my iPad Air shows no service on the top left hand corner? It has been working fine previously, the problem started after upgrading to IOS 7.1.2
If you are not using Cellular Data, turn it off.
-
Problems to reconize the sim card after upgrade itunes, what should I do???
Problems to reconize the sim card after upgrade itunes, what should I do???
Get a SIM card from the carrier to whom the phone is legitimately locked.
-
CS5 can't preview the fonts image after upgrade the OS X 10.10.1
My CS5 can't preview the fonts image after upgrade the OS X 10.10.1,
Wanna try to reinstall the AI but my disc read error. Anyone has this problem or solution, Many Thanks!!Thanks but can't find this "system transparency" setting inside the illustrator. Search the key word doesn't work...
-
Has anyone else had issues with dropping the wifi connections since upgrading to Yosemite
has anyone else had issues with dropping the wifi connections since upgrading to Yosemite
Looking at the Yosemite forum, it is obvious that this is a very common issue. You might want to post in that forum for help and advice.
OS X Yosemite -
Cannon MP830 can't use the scanner function after upgrading to Mavericks.
I have an Cannon MP830 and now I can't use the scanner function after upgrading to Mavericks. Can someone help?
There is no ICA driver for this model so you won't be able to use Image Capture or Preview. But there is a TWAIN scanner driver and the supporting MP Navigator application available for 10.8 from Canon, so you could try installing these and see if you can scan again.
-
How can you change apps store when you travel around the world?
After upgrading to IOS6, suddently my iPad has switch me to the greek apps store instead of leaving me into my canadian apps store.
Therefore, I cannot upgrade 60+ apps on my iPad.
Does someone know how to revert this situation?
Thanks for your help!Try this:
1. App Store>Feature>Apple ID (at bottom of page)
2. Tap on Apple ID>View Apple ID
4. Enter your password
5. Country/Region>Change Country or Region
Maybe you are looking for
-
How can I migrate an Aperture library from an external HDD with Mac OS Extended (Journaled, Encrypted) format? I used to store my pictures on an external hard drive using the latest version of Aperture. Now I tried migrating my Aperture library to Ph
-
Multiple threads calling the same stored proc with different parameters
Hi, I have a stored procedure which will be called by 8 threads. Every time it takes in a different parameter. Actual execution time for this proc (irrespective of the parameter) is around 2 seconds. But when I call the 8 threads, I see that the tota
-
How can I determine which programs/files are using disc space?
A question for the professionals: What program on my MacBook Pro can I run to determine which programs and files are taking up the percentage of disc space? I am running at 72 gb, which is great, but I need to know what is using up the rest of it.
-
Missing folder in list view. Mac OSX 10.4.11
I have an external Firewire Hard Drive with 10 folders on it. One of the folders contains around 100GB of video files. This folder does not appear in the list view. All the other folders appear as normal. In ccon or column view the folder is there. I
-
DVI second monitor stopped working. Stuck in "Power Save Mode"
I have a HPE-110f Desktop PC. Monitor does not respond to all manners of troubleshoot e.g. update SW, disconnect reconnect. power save to "never" settings. Monitor checked on VGA and works fine. Status of Video Card infers working. Considering DVI ad