Issue in using SQL Authentication in child SSIS packages from Parent SSIS package.

I am trying to provide SQL Authentication mode and credentials at parent package and I am using some child pachnages been called from this package.
How can I resolve this to use SQL authentication.
I am using 2008 Version
Thanks
Sreenath
Sreenath G V

Hi Sreenath,
What issue did you encounter when run the parent package? It should work properly if the SQL Server Authentication is already enabled on the target SQL Server instance and the SQL account credentials are input correctly in the child package.
You may encounter issue if you have enabled Package Configurations for the child pages that use SQL Server authentication and selected to expose the UserName and Password for the SQL Server connection. In this situation, the password won’t be exposed to
the package configurations explicitly, hence, the Dtexec utility cannot fetch the password for the connection and fails the package execution. If it is the issue, you have to specify the password for the SQL Server account in the package configurations file.
Regards,
Mike Yin
TechNet Community Support

Similar Messages

Child package cannot read param value from parent ssis package

Hi all,
I think I must be crazy !! i have a big problem in my ssis project .
i have more than 40 package one parent and 39 childs
i use configuration method to get variable values from parent to child packages and it work well .. but when i copy my ssis project
to the production server i face the following problem .. childs package didn't read the variables values from the parent package
i revised the configuration many times i can't find any missing !!
any help please ...
Thanks,

Do not copy the packages from the projet to the production server, but you must generate the manifest installation including your configuration, and deploy them.
Note : not forget to include the configuration.
To learn more about how to install the package :
Lesson 1:
http://msdn.microsoft.com/en-us/library/ms365332(v=sql.105).aspx
Lesson 2 :
http://msdn.microsoft.com/en-us/library/ms365329(v=sql.105).aspx
Lesson 3 :
http://msdn.microsoft.com/en-us/library/ms365321(v=sql.105).aspx

Executing Child Taskflow Method from parent taskflow page

Hi All,
I have one issue with checking dirty data form Parent Taskflow button to check dirty data update in Child Taskflow page's view Object.
JDev version: 11.1.1.3
Scenario :
Outer Container page has back button which need to check wherethere child taskflow has dirty data update or not. Child Taskflow transaction is always create new transaction and non-shared. But from ControllerContext, the root am service still associated with other viewobjects i.e. is loaded in others tabs in that outer container page, which is also checking dirty data from another tabs' viewobject dirty data checking (I need to avoid this issue that's why not working for me with controller context). I am thining to execute the child taskflow method from parent page on back button to check dirty data update for that tabs' page only. For it, how can we get access child taskflow method from parent page with static region taskflow. Is there any solution to implement like this? thank you so much.
- Robin

Hi,
this should work:
1. child task flow has input parameter "parentBean" defined.
2. The child task flow has a managed bean "ChildBean" defined in pageFlowScope with a property "parentBean" with setter/getter.
3. the parentBean input parameter references (in its value roperty) #{pageFlowScope.childBean.parentBean}
4. The parent bean is configured on the parent view task flow (viewScope) and passed as a task flow binding input parameter. The parent bean has a boolean property "childFlowTransactionDirty"
This allows the child bean to invoke the parent bean childFlowTransactionDirty to tell it that the transaction is dirty. On the parent view, you would just check the parentBean state for this property.
Next is how you set the value on the parentBean from the childTaskFlow. One option is to use a RegionController on the PageDef file of ADF bound views in the child task flow.
public class MyRegionController implements RegionController {
    public MyRegionController(){
    public boolean refreshRegion(RegionContext regionContext) {
     int refreshFlag = regionContext.getRefreshFlag();
      //get access to the ChildBean and its parentBean property. Then call
      //ControllerContext .... to check the transaction state
      //update the childFlowTransactionDirty property
      ((DCBindingContainer)regionContext.getRegionBinding()).refresh(refreshFlag);
      return true;
    @Override
    public boolean validateRegion(RegionContext regionContext) {
        regionContext.getRegionBinding().validate();
        return false;
    public boolean isRegionViewable(RegionContext regionContext) {
        return regionContext.getRegionBinding().isViewable();
    @Override
    public String getName() {
        return this.getClass().toString();
}Next: When users press the back button in the parent view, you call the ParentView bean childFlowTransactionDirty to check the child task flow transaction to be dirty or not
Frank

ADF Security integration with Web Logic Security using SQL authenticator

Hi,
I was trying to find a suitable way of handling the following requirements:
1. Administrators should be able to create the roles, groups, users and assign users to roles.
2. User, Roles, Groups should be stored in DB and Users need to be authenticated accordingly.
3. I need to be able to map roles with security permissions on Taskflows, JSF Pages, on UI level using groovy expressions and even at Entities level.
I performed the following tasks:
1. I created back end Security tables, created SQL authenticator as provider and defined the queries in it then I created ADF Application and used JMX APIs to call the SQL authenticator to perform its operations.
2. I defined the roles and respective resource permissions in ADF i.e. Jazn xml file because my requirement no 3 would not be achievable without using ADF security.
Now in this scenario how I can login a user in ADF context and assign roles programmatically that I authenticated from JMX APIs? Or is there any other suitable way to handle these requirements?
Thanks.
-Moeen

Hi Charu,
Thanks for your reply.
Can we programmatically add a user in adfsecuritycontext as a currently logged in user, a user which is not present in jazn.xml file? If yes then can we programmatically assign the roles which are defined in jazn.xml to that specific user?
Moeen

How to Use Messge-Pool of Child DC, in the Parent DC

Hi,
I am trying to achieve componentization of webdynpro projects.
I want to use the messages stored in the Messge-Pool of child DC, in the parent DC.
I have done the following so far:
I have stored all the messages(error/standard) in the message pool of one DC project.
I have created the public part of the component of that DC.
I have Build-deploy-checkin that DC project.
I have added that public part to another DC.
I have successfully added it to the "used Webdynpro components" of the second DC.
I am able to successfully pass values using context mappings, between the two DCs.
But i am not able to use the Messges available in th message-pool of the first(child) DC.
I added the childDC to the properties of the Views of the second(Parent) DC, but i am still not able to use the Messages present in the Messagepool of the child DC.
Is there a way to use the Messages present in the Messagepool of the child DC, in the views of the parent DC???
Thanks,
Hanoz

Hello,
You have to use EXPORTING LIST TO MEMORY AND RETURN addition with SUBMIT stmt.
Try like this:
DATA:
L_IT_LIST TYPE STANDARD TABLE OF ABAPLIST.
SUBMIT <Child Program Name>
WITH SELECTION-TABLE LIT_RSPARAMS
EXPORTING LIST TO MEMORY AND RETURN.                   "#EC CI_SUBMIT
CALL FUNCTION 'LIST_FROM_MEMORY'
    TABLES
      LISTOBJECT = L_IT_LIST
    EXCEPTIONS
      NOT_FOUND = 1
      OTHERS     = 2.
IF SY-SUBRC = 0.
    CALL FUNCTION 'WRITE_LIST'
      TABLES
        LISTOBJECT = L_IT_LIST
      EXCEPTIONS
        EMPTY_LIST = 1
        OTHERS     = 2.
    IF SY-SUBRC <> 0.                                       "#EC *
*     Do Nothing
    ENDIF.
Hope this is clear.
BR,
Suhas

Error running child packages from parent package - Error 0xC0011008

Hey...
I am running a parent SSIS package (running sp2, 9.0.3042) that calls several child packages.
On our development server, we now cannot run this because we get 1 or more of these errors:
"Error 0x80004003 while preparing to load the package. Invalid pointer . "
"Error 0xC0011008 while preparing to load the package. Error loading from XML. No further detailed error information can be specified for this problem because no Events object was passed where detailed error information can be stored. . "
It is not occuring on the same packages. It varies every time it is run.
I can run every one of the child packages individually, using the same login ID that the parent is executed under.
The parent package works fine on my local machine and other servers running the same version of SSIS. Just not on this server.
Does anyone have any ideas???
Thanks
BobP

I have the same error with no parent child package relationship. I have changed the "Max Concurrent Executables" in each package from -1 to 10 and got no change. My code is below:
List
<string> fileList = new List<string>();
private
void checkedListBox1_SelectedIndexChanged(object sender, EventArgs e)
//this.fileList.Add(checkedListBox1.SelectedValue.ToString().Trim());
this.fileList.Add("name");
private
void button1_Click(object sender, EventArgs e)
string @fileName;
foreach (string str in fileList)
@fileName = str;
string pkgLocation;
Microsoft.SqlServer.Dts.Runtime.
Application app;
DTSExecResult pkgResults_Sql;
pkgLocation =
@"C:\" + @fileName + ".dtsx";
app =
new Microsoft.SqlServer.Dts.Runtime.Application();
Package pkgIn = new Package();
pkgIn = app.LoadPackage(pkgLocation,
null);
pkgResults_Sql = pkgIn.Execute();

Link to Child Webi report from Parent Webi report

Hi All,
I have child link for webi report in my parent webi report.
But, when i click on URL for child report, its again asking for logon credentials.
Is there any way to avoid asking logon credentials, instead it should pick credentials from parent.
Please reply.
Thanks,
Bhanu

Hi
If your link contains different host that is, after clicking the link if you want to redirect to another document with another BO server that time you have to supply credential (Login info of this server).
Case of same server no need to supply credential.
Thanks

Some minor issues while using SQL developer

OS: Windows XP professional SP2
SQL Developer: 1.0.0.14
Database: Oracle 9.2.0.3
1. While exporting report it did not set destination path even though I choose path using
browse button.
2. When I saw table data it did not show some data in one column (datatype: number(10)).
When I clicked cell it showed me data.
Thank you for your help,
Pratik

Both questions already mentioneds in this forum. I suggest that you use the SEARCH tool in this forum.

Using SQL Server in Window Authentification mode from Coldfusion

I've received the following private message and don't know
how to answer. Can anyone else help?
quote:
Is there any some simple way to use the sql server in windows
authentication mode from coldfusion??? Other the creating the ODBC
Socket.

Hi Colum,
get these quite often, which is why I turn PM off most of the
time.
Just send them to the right forum:
http://www.adobe.com/cfusion/webforums/forum/index.cfm?forumid=1
Cheers
Craig

Concurrent Execution of Child Packages from a Master Package

Hi,
I have a package which I am calling 9 times from a Controlling / Master Package. Its all running fine, except the Child package exceution is limited to 6 package only. 3 sit dorman in the pre executed state (shows as white on the control flow).
Is SSIS limiting how many packages can be executed concurrently? Is there a setting for this?
Many thanks,
Andy.

Ah! Found the Answer: http://sqlage.blogspot.co.uk/2014/03/what-is-maxconcurrentexecutables.html

How to remove child query link from parent query for RRI

Hi Floks,
Long back we have created one RRI report(which is having parent child relation).Currently i wanted to remove this link or relation (i.e remove child report) between them.
I tried From t-code RSBBS but i could n't. Please give me some inputs to fix this.
Regards,
Satya.

Hi Satya,
In the TCode RSBBS ,did u try deleting the assignments itself ..........save it and transport it ...........
Rgds
SVU123

SSIS package is failing when using SQL server agent

I am trying to execute an SSIS package through an SQL server agent and receiving the following error:
Message
Executed as user: serv-syst\SYSTEM. Microsoft (R) SQL Server Execute Package Utility Version 10.50.1600.1 for 32-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 1:56:53 PM Error: 2014-04-21
13:56:54.81     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred.
Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login failed for user 'hsnzha'.". End Error Error: 2014-04-21
13:56:54.82     Code: 0xC00291EC     Source: Drop table(s) SQL Task 1 Execute SQL Task     Description: Failed to acquire connection "DestinationConnectionOLEDB". Connection may not be configured
correctly or you may not have the right permissions on this connection. End Error Error: 2014-04-21 13:56:54.82     Code: 0xC0202009     Source: PACKAGEWMG Connection manager "DestinationConnectionOLEDB"
Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available. Source: "Microsoft SQL Server Native Client 11.0" Hresult: 0x80040E4D Description: "Login
failed for user 'hsnzha'.". End Error Error: 2014-04-21 13:56:54.82     Code: 0xC00291EC     Source: Preparation SQL Task 1 Execute SQL Task     Description: Failed to acquire connection
"DestinationConnectionOLEDB". Connection may not be configured correctly or you may not have the right permissions on this connection. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 1:56:53 PM
Finished: 1:56:54 PM Elapsed: 0.844 seconds. The package execution failed. The step failed.
My SSIS package retrieves a excel file and saves the vales into an SQL table. When I run the package by itself in my server it works fine but when it's called from a SQL agent, it fails with the above error. Please help me resolve it.

That's the issue. If it's a SQL login the password cannot be retrieved by account executing the package from the job which is why login fails. In that case best thing would be set password in job properties or pass it using configuration created in the package
See
HTTP://blogs.msdn.com/b/runeetv/archive/2011/12/22/ssis-package-using-sql-authentication-and-dontsavesensitive-as-protectionlevel.aspx
Please Mark This As Answer if it helps to solve the issue Visakh ---------------------------- http://visakhm.blogspot.com/ https://www.facebook.com/VmBlogs
My package is saved with ServerStorage which appears under \\server\Stored Packages\MSDB\PACKAGE and when I run it, it works fine.
There is a new error message that I get now after following the steps from the link...
Message
Microsoft (R) SQL Server Execute Package Utility
Version 10.50.1600.1 for 32-bit
Copyright (C) Microsoft Corporation 2010. All rights reserved.
Started: 3:34:22 PM
Error: 2014-04-21 15:34:23.82
   Code: 0xC0202009
   Source: PACKAGEWMG Connection manager "SourceConnectionExcel"
   Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80004005.
An OLE DB record is available. Source: "Microsoft Office Access Database Engine" Hresult: 0x80004005 Description: "Unexpected error from external database driver (????????).".
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC020801C
   Source: Data Flow Task 1 Source - 'Contact Center$' [1]
   Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "SourceConnectionExcel" failed with error code 0xC0202009. There may be error
messages posted before this with more information on why the AcquireConnection method call failed.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC0047017
   Source: Data Flow Task 1 SSIS.Pipeline
   Description: component "Source - 'Contact Center$'" (1) failed validation and returned error code 0xC020801C.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC004700C
   Source: Data Flow Task 1 SSIS.Pipeline
   Description: One or more component failed validation.
End Error
Error: 2014-04-21 15:34:23.82
   Code: 0xC0024107
   Source: Data Flow Task 1
   Description: There were errors during task validation.
End Error
DTExec: The package execution returned DTSER_FAILURE (1).
Started: 3:34:22 PM
Finished: 3:34:23 PM
Elapsed: 1.25 seconds

Issue during Running Package using Sql Agent

hi all
I have an issue when I deployed Package and Run package using sql agent.
before a Successfully Run Package without Any error. but in job It gives me error.
Executed as user: abc\sqlserver. Microsoft (R) SQL Server Execute Package Utility Version 10.50.4000.0 for 64-bit Copyright (C) Microsoft Corporation 2010. All rights reserved.    Started: 08:28:11 Error: 2014-02-12
08:28:11.86     Code: 0xC0016016     Source:       Description: Failed to decrypt protected XML node "DTS:Password" with error 0x8009000B "Key not valid for use in specified
state.". You may not be authorized to access this information. This error occurs when there is a cryptographic error. Verify that the correct key is available. End Error Error: 2014-02-12 08:28:11.97     Code: 0xC0202009
Source: PAckageNameReport Connection manager "....................."     Description: SSIS Error Code DTS_E_OLEDBERROR. An OLE DB error has occurred. Error code: 0x80040E4D. An OLE DB record is available.
Source: "Microsoft SQL Server Native Client 10.0" Hresult: 0x80040E4D Description: "Login failed for user .....". End Error Error: 2014-02-12 08:28:11.97     Code: 0xC020801C
Source: Import into Excel OLE DB Source [1]     Description: SSIS Error Code DTS_E_CANNOTACQUIRECONNECTIONFROMCONNECTIONMANAGER. The AcquireConnection method call to the connection manager "....................." failed
with error code 0xC0202009. There may be error messages posted before this with more information on why the AcquireConnection method call failed. End Error Error: 2014-02-12 08:28:11.97     Code: 0xC0047017
Source: Import into Excel SSIS.Pipeline     Description: component "OLE DB Source" (1) failed validation and returned error code 0xC020801C. End Error Error: 2014-02-12 08:28:11.97     Code: 0xC004700C
Source: Import into Excel SSIS.Pipeline     Description: One or more component failed validation. End Error Error: 2014-02-12 08:28:11.97     Code: 0xC0024107     Source: Import into Excel
Description: There were errors during task validation. End Error DTExec: The package execution returned DTSER_FAILURE (1). Started: 08:28:11 Finished: 08:28:11 Elapsed: 0.14 seconds. The package execution failed.
The step failed.
I'm using Sql Authentication.
Kindly Help.
thanks

Hi BI_group,
According to the error message, the issue may occur due to two possible reasons: protection level of the package or the 32-bit/64-bit driver issue.
For the first possible reason, it may be that package still uses the default protection level EncryptSensitiveWithUserKey after it is deployed, however, the SQL Server Agent job runs under a different user account. To avoid the issue, you can re-deploy the
package and set the package protection level to EncryptSensitiveWithPassword or DontSaveSensitive during the deployment. If it is set to EncryptSensitiveWithPassword, we need to configure the Execution options of the job step to use the
/decrypt password option in the DTexec utility command line to decrypt the encrypted data. If the package is deployed to the SQL Server or SSISDB catalog, we can set the protection level to Rely on server storage for encryption or ServerStorage.
If it is not the case, check whether it is caused by the 32-bit/64-bit driver issue. For a 64-bit SSIS server, it uses 64-bit drivers by default, however, BIDS/SSDT uses 32-bit drivers unless the Run64BitRuntime property of the IS project is set to true.
In the BIDS/SSDT, check the Run64BitRuntime property to see if it runs in 32-bit or 64-bit runtime. This enable us to judge whether we need to check the “Use 32 bit runtime” option for the job step.
Regards,
Mike Yin
TechNet Community Support

External Content Type Using SQL

I’m trying to setup an external content type using just SharePoint designer.
I will need to be able to show other individual within the organization how to create these content types so getting it to work with just SharePoint designer is the goal.
No Programming involved please.
Abbreviated Steps I have taken
The account that we will use to connect to 2012 SQL server has been created and the correct permissions have been granted to the database.
The secure store service account has been created and setup
Go into SharePoint designer 2010 to create the external content type using
Impersonated Custom Identity and inputting in the username and password that was setup in SQL server and added to the secure store credentials for the secure store service. I receive error cannot login with the provided credentials.
I have searched the web trying to correct this issue and cannot find anything that will assist.
Everything either shows you to connect with windows identity (not an option) or breezes past this issue.

To connect as an impersonated custom identity you have to:
1. Be sure SQL login on SQL Server uses SQL authentication
(not Windows one!)
2. Create target application in Secure Store with:
a. Target app type - "Group"
b. Field types - Username and
Password
3. Don't forget to grant required permission to a new Traget Application.
Here is a good guide (look at steps 4-8):
http://lightningtools.com/bcs_meta_man/sharepoint-2010-secure-store-service-and-oracle/

Problem with ADF Security / SQL Authenticator after upgrade to 11.1.1.6

Hi,
We have an ADF application built with JDeveloper 11.1.1.2 that's been in production for a couple of years. Now we are in the process of upgrading to 11.1.1.6 so I have upgraded WLS and ADF in a test environment and re-deployed the application there. The application uses users and groups from database using SQL Authenticator configured in WLS. This worked fine in the old version but now after the upgrade we can't log in with credentials from the database. I can log in if I add a user to the default authenticator. We didn't touch any of the authenticator settings or security realm configurations during the upgrade. Both authenticators are marked as SUFFICIENT, as they have always been.
Has something changed in the way SQL Authenticator is used since 11.1.1.2? What could be the problem?
Regards,
Joonas

Answering myself here: after recreating the SQL Authenticator and the ADF Security configuration logins are working again. Don't know where the problem was though.

Issue in using SQL Authentication in child SSIS packages from Parent SSIS package.

Similar Messages

Maybe you are looking for