Issue to make mandatory field(SELD/BBD and Date of manufactor)in migo for particular Material type and material Number starting with'1' series.

Hi friend,
i have issue regarding mandatory  self life field (SELD/BBD and Date of manufactor)in migo for Batch Tab for particular Material start with '1' Series and material type.
i want to make mandatory above field during GR from migo..any one let me know exit or badi for that to full fill this goal..
Regard's,
shaikh Khalid.

Hi Shaikh
First of all Thread is not closed seconldy as a good practice if you have resolved your issue kindly document it here so that it may help someone in future
Nabheet

Similar Messages

  • Restrict User for Particular Doc Types and GL Account

    Dear Experts,
    I want to restrict few users with Doc type JV and Posting to GL Account 1 - 1000
    I created a set for Username fo be restricted and i have written a Validation for Line Item  saying
    Prerequiste
    BKPF-BLART = 'JV' AND BKPF-USNAM IN T_DOC_USERS
    Check
    BSEG-HKONT >= '1' and BSEG-HKONT >= '1000'
    Mesaage
    User Resticted for Doc Type JV and GL Account
    Can someone please advice on priority
    Thanks in Advance !!!!
    Regards
    Rahul

    HI
    1.You can restrict the user to document types by authorization settings Transaction Code PFCG
    Note : This will not hide entries in a drop down list.
    2.You can restrict the user to view the General Ledger reports like FBL3n,FBL1N like wise
    Hope this will help you

  • Im trying to make a payment but it says the CC is not aprovved for Salvadorean Itunes store, and when i try to change my country dont let me cause i need to make that payment .. what should i do?

    im trying to make a payment but it says the CC is not aprovved for Salvadorean Itunes store, and when i try to change my country dont let me cause i need to make that payment .. what should i do?

    Supply a payment method which is valid in Salvador, or ask the iTunes Store staff for assistance.
    (113417)

  • Relationship between material type and industry sector

    Hi experts
    when using t-code mm01,there are two fields material type and industry setor in screen.Is there any relationship between material type and industry sector? I want to know if user be able to see the material type related to particular industry sector?
    thanks in advance!

    Hello
    There is no direct relationship between the material type and the industry sector.
    The industry sector is used only for field sttus maintenance (fields in display/optional/requierd entry) in transactions.
    We will assign seperate field reference groups to industry sectors and deopending on how we configure the field references, the fields will appear for the materials created for that industry sector.
    regards

  • How to change material type and industrial sector of the exsisting material

    Hi,
    There is an issue where user wants to change material type and industrial sector of the exsisting material .Is  it posible to do so??
    IF not ,how can we delete that material from material master so that another material with same number and required material type and industrial sector  can be created.
    Points will be definitely rewarded.
    Thanks
    Rohit

    Hi Rohit,
    You can change the material type in MMAM trxn code if the material dosenot conatain any open purchase requisitions, open reservations & open purchase orders. Also material stock should be zero.
    Remember the new material type should have same attributes same as old material type.
    OLD Material New Material
    1) Standard Price 1) Standard Price
    2) Manufacture part 2) Manufacture part
    profile actvated profile actvated
    3) Quantity & Value 3) Quantity & Value
    Updation in all areas Updation in all areas
    4) should have same GL 4) Should have same GL acs
    acs
    It is not possible to change Industry sector once created.
    If you want to delete the Material, you can flag it in MM06 trxn code.
    Reg,
    Ashok
    Dont forget to Assign points if useful.

  • HT3275 Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image "/Volumes/Data/Anthony's iMac.sparsebundle" could not be accessed (error -1). Why? They computer system is up to da

    Hi, I have backed up 2 IMACs and one Mac Book Pro but for some reason, the 3rd IMAC come up with this problem: The backup disk image “/Volumes/Data/Anthony’s iMac.sparsebundle” could not be accessed (error -1). Why? The computer system is up to date and I have had no issue with the other computers, just this one.
    Many thanks
    Anthony

    Try this Discussion...
    https://discussions.apple.com/message/18783684#18783684

  • Link material type and item category.

    Hi,
    Can you brief me on how following setting in SPRO works?
    Plant maintenance - Maintenance and service processing - Maintenance and service order - General data - Define default values for componenet item category
    When i checked, this setting is to link item category with the material type and item category is defined based on the material type and maintenance plant. But what is the relation in term of the order type i.e. whenever i create any order with a specifica order type, the default item category should get reflected on the componenets tab of the order?
    Is it possible?
    Can you guide me how to do this setting.
    Thansks

    Hi,
    Yes it is posible to make all order types item category mark as stcok item "L" as default value. Very well u can set it at following menu path under PM&CS Node
    Maintenance and Service Orders
    Functions and Settings for Order Types
    General Data
    Define Default Values for Component Item Categories
    Ramesh

  • I have a macbook pro core i7 mid 2012 And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve t

    I have a macbook pro core i7 mid 2012
    And update to the latest version 10.8.4 system after updating the system I have the problem appeared to take off the device and stops at the apple logo for about 5 minutes and then enters the desktop How can I solve this problem and thank you

    If you have more than one user account, these instructions must be carried out as an administrator.
    Launch the Console application in any of the following ways:
    ☞ Enter the first few letters of its name into a Spotlight search. Select it in the results (it should be at the top.)
    ☞ In the Finder, select Go ▹ Utilities from the menu bar, or press the key combination shift-command-U. The application is in the folder that opens.
    ☞ Open LaunchPad. Click Utilities, then Console in the icon grid.
    Step 1
    Make sure the title of the Console window is All Messages. If it isn't, select All Messages from the SYSTEM LOG QUERIES menu on the left. If you don't see that menu, select
    View ▹ Show Log List
    from the menu bar.
    Enter "BOOT_TIME" (without the quotes) in the search box. Note the timestamps of those log messages, which refer to the times when the system was booted. Now clear the search box and scroll back in the log to the last boot time when you had the problem. Select the messages logged after the boot, during the time something abnormal was happening. Copy them to the Clipboard (command-C). Paste into a reply to this message (command-V).
    For example, if the problem is a slow startup taking three minutes, post the messages timestamped within three minutes after the boot time, not before. Please include the BOOT_TIME message at the beginning of the log extract.
    If there are runs of repeated messages, post only one example of each. Don’t post many repetitions of the same message.
    When posting a log extract, be selective. In most cases, a few dozen lines are more than enough.
    Please do not indiscriminately dump thousands of lines from the log into this discussion.
    Important: Some private information, such as your name, may appear in the log. Anonymize before posting.
    Step 2
    Still in Console, look under System Diagnostic Reports for crash or panic logs, and post the entire contents of the most recent one, if any. In the interest of privacy, I suggest you edit out the “Anonymous UUID,” a long string of letters, numbers, and dashes in the header of the report, if present (it may not be.) Please don’t post shutdownStall, spin, or hang logs — they're very long and not helpful.

  • Reg. New material type and New movement type

    dear Friends
    For what reason we need to create new material type and movement type ? this quesition is frequently asked by interviewer,but my answer is not exactly correct. Please tell me, why we are create newly. already I posted this quesition and got reply but no satisfaction with that.
    Thanks in advance
    Rajakumar.K
    *Note : Interview questions were not allowed in forum,Search forum before posting,lot of answered
    threads already available*
    Edited by: Jeyakanthan A on May 26, 2011 10:57 AM

    Hi,
    New Material type is required to meet various business functionalities of client. Depending on user department views required by client, field selection key required, wheather quanity and value updation is required or not and if so under which valuation area its required, wheather the business wants to have default value of price control  in material master, number range intervals to be used and wheather its internal/external, account determination process etc are some controlling functions which may force a business to create customised or new material type.
    Similarly new movement types can be created when the controlling features of the existing movement type do not match the requirement like wheather any movement type is required to move goods from GR valuated stock ( as an illustration), wheather auto PO/Auto storage location needs to be decided automatically, new account grouping and field selection procedure to be used etc are some controlling functions. As an illustration in earlier version of ECC 6.0 there was no movt type like 107,109 etc but since most of the business wanted to valuate stock when goods movement will occur from GR valuated stock , the above movt types was introduced in ECC 6.0. Thus business justification and understanding should be concrete to create new movt type.

  • Not getting the Link between GEIL and material type: procured  material not

    Hi Friends,
    Some material corresponding to certain G/L Account numbers are not appearing. From Fagll03 I can check the G/L Account number, but how shall be able to get the corresponding table field which holds the material or to check whether that G/L Account number has been properly linked to the material.
    Please suggest what to do. Is this a problem of programming ? or ...
    Thanks,
    Saheli

    Hi Saheli,
    Link b/n GL accounts and Material is in this way.
    Material is created based on material type and material type is connected to Valuation class via Account category reference.
    Now that for each valuation class corresponding GL accounts are defined in customizing.
    you can check the same in Tcode# OBYC.
    To check the posting to Inventory account during GR, select BSX (Inventory posting) and check whether the corresponding valuation class has got the assignment with GL accounts or not.
    Hope this help you out.
    BR,
    Krishna

  • Sap notes for 103 movement type and 105 movement types in sap

    Hi all,
    Please let me know if there are any sap notes for 103 movement type and 105 movement type in sap as soon as possible
    points will be awarded.
    thanking u in advance,
    srinivas.

    There are many SAP notes related to these movement types e.g 514609,750836,
    533833, 808029, 317823,etc.
    You can search them at http://service.sap.com
    Regards,
    Amit

  • I have a .mac family account, a personal .mac account and separate iTunes id I use for my work iPhone and the associated apps.  How do I keep them separate in the iCloud change?

    I have a .mac family account, a personal .mac account and separate iTunes id I use for my work iPhone and the associated apps.  How do I keep them separate in the iCloud change?

    Welcome to the Apple community.
    Could you tell us a little more about what you want to do. Bear in mind that iTunes has nothing to do with your iCloud account.

  • Ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset.

    ok i have been trying to download albums, songs, apps, etc. and my itunes keeps asking me for the security question and for the life of me i cant remember the answers. I dont know what the email is that receives the question reset. is there anything i can do to fix this or am i screwed?

    If you have music that was purchased on different iTunes accounts than the one you use, then you must provide the password, otherwise the tunes are not considered yours.  You can turn off iCloud and just use the usual USB sync method.  But I wonder whether you'll have the same problem?

  • I am using iCal on my iMac, iPad and iPhone using iCloud and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched.  Was is this happening?

    I am using iCal on my iMac, iPad and iPhone and when I set the alert for 1 day before and the second alert to 1 hr before, then save the alerts switched.  Was is this happening?

    http://support.apple.com/kb/he57?viewlocale=de_de
    India
    (91) 1800 4250 744
    www.apple.com/in/support/
    hope it helps

  • My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on.  How do I get it going again?  What happened?

    My nano and iPhone4 were face to face for a few seconds and now my iPhone won't turn on.  It doesn't do anything.  I had just charged it.  How do I get my iPhone going again?  What happened?

    Reset your phone:
    Press the sleep/wake button & home button at the same time, keep pressing until you see the Apple logo, then release.

Maybe you are looking for