Issue while accessing the SharePoint site - SharePoint 2010 - after Password update

SharePoint site is working until we update the password(as it is expiring, we have created a new password) .
We have updated the password in central admin.
After password update, getting the below
error.
Exception
Details: System.InvalidOperationException: Operation is not valid due to the
current state of the object.
[InvalidOperationException: Operation is not
valid due to the current state of the object.]
Microsoft.SharePoint.WebControls.SPControl.SPWebEnsureSPControl(HttpContext
context) +26890024
Microsoft.SharePoint.Utilities.SPUtility.DetermineLayoutsUrl(SPWeb overrideWeb,
HttpContext context, Boolean includeLCID, Boolean doNotInitWeb) +252
Microsoft.SharePoint.Utilities.SPUtility.DetermineRedirectUrl(String
urlProposed, SPRedirectFlags flags, HttpContext context, SPWeb overrideWeb,
String queryString, String& urlRedirect) +616
Microsoft.SharePoint.Utilities.SPUtility.Redirect(String url, SPRedirectFlags
flags, HttpContext context, String queryString) +98
Microsoft.SharePoint.Utilities.SPUtility.HandleAccessDenied(HttpContext context)
+1077
Microsoft.SharePoint.IdentityModel.SPFederationAuthenticationModule.OnEndRequest(Object
sender, EventArgs args) +693
System.Web.SyncEventExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute()
+80
System.Web.HttpApplication.ExecuteStep(IExecutionStep step,
Boolean& completedSynchronously)
+171
We have gone through different articles and did below steps but there is no resolution for us
1) Verified all the SharePoint services in central admin and configured the updated service account to all the services.
2) Removed the SharePoint content DB and attached it again.
Could you please provide any pointers?
Marulasiddappa SB (Swamy)

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

Similar Messages

I'm facing performance issue while accessing the PLAF Table

Dar all,
I'm facing performance issue while accessing the PLAF Table.
The START-OF-SELECTION of the report starts with the following select query.
    SELECT plnum pwwrk matnr gsmng psttr FROM plaf
    INTO CORRESPONDING FIELDS OF TABLE it_tab
    WHERE matnr IN s_matnr
      AND pwwrk = p_pwwrk
      AND psttr IN s_psttr
      AND auffx = 'X'
      AND paart = 'LA' .
While executing the report in the Quality system it does not face any performance issue...
When it comes to Production System the above said select query itself it is taking 15 - 20 minutes time to move further.
Kindly help me to over come this problem...
Regards,
Jessi

Hi,
"Just implement its primary Key
WHERE PLNUM BETWEEN '0000000001' AND '9999999999' " By this you are implementing the Primary Key
This statement has nothing to do with performance, because system is not able to use primary key or uses every row.
Jessica, your query uses secondary index created by SAP:
1     (Material, plant) which uses fields MANDT MATNR and PLWRK.
but it is not suitable in your case.
You can consider adding new one, which would containt all fields: MANDT, MATNR, PWWRK, PSTTR AUFFX PAART
or - but it depends on number of rows meeting and not meeting (auffx = 'X' AND paart = 'LA' ) condition.
It could speed the performance, if you would create secondary index based on fields MANDT, MATNR, PWWRK, PSTTR
and do like Ramchander suggested: remove AUFFX and PAART from index and where section, and remove these unwanted rows
after the query using DELETE statement.
Regards,
Przemysław
Please check how many rows in production system

Performance issues while accessing the Confirm/Goods Services' transaction

Hello
We are using SRM 4.0 , through Enterprise Portal 7.0.
Many of our users are crippled by Performance issues when accessing the Confirm/Goods Services tab( Transaction bbpcf02).
The system simply clocks and would never show the screen.
This problem occurs for some users all the time, and some users for some time.
It's not related to the User's machine as others are able to access it fast using the same machine.
It is also not dependent on the data size (i.e.no . of confirmations created by the user).
We would like to know why only some users are suffering more pronouncedly, and why is this transaction generally slower than all others.
Any directions for finding the Probable cause will be highly rewarded.
Thanks
Kedar

Hi Kedar,
Please go through the following OSS Notes:
Note 610805 - Performance problems in goods receipt
Note 885409 - BBPCF02: The search for confirmation and roles is slow
Note 1258830 - BBPCF02: Display/Process confirmation response time is slow
Thanks,
Pradeep

MDS issue while accessing the application

Hi,
We are using Webcenter Portal Application PS3 application. Application is deployed successfully but while trying to access the application we are getting the following errors:
<oracle.webcenter.lifecycle.listener.LifecycleServletContextListener> <BEA-000000> <
oracle.webcenter.lifecycle.LifecycleException: MDSException while creating an export set import lock
at oracle.webcenter.lifecycle.operation.LockUnit.doImportExportSet(LockUnit.java:359)
weblogic.management.deploy.internal.DeploymentServerService.start(DeploymentServerService.java:96)
at weblogic.t3.srvr.SubsystemRequest.run(SubsystemRequest.java:64)
at weblogic.work.ExecuteThread.execute(ExecuteThread.java:207)
at weblogic.work.ExecuteThread.run(ExecuteThread.java:176)
Caused By: oracle.mds.exception.ReadOnlyStoreException: MDS-01273: The operation on the resource /oracle/webcenter/lock/exportsetImport/exportsetImport.xml failed because source metadata store mapped to the namespace / BASE DEFAULT is read only.
<oracle.webcenter.portalframework.sitestructure> <BEA-000000> <oracle.adf.rc.exception.DefinitionNotFoundException: cannot find resource catalog using MDS reference /oracle/webcenter/portalapp/navigations/default-navigation-model.xml Root Cause=[MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"] [Root exception is oracle.mds.core.MetadataNotFoundException: MDS-00013: no metadata found for metadata object "/oracle/webcenter/portalapp/navigations/default-navigation-model.xml"]>
Note : Our current application is a simple adf application, it doesnt contain taskflow and also we not using any customization.
Weblogic Server Version : 10.3.4.0
Webcenter Version : 11.1.1.4.0
Please advice.

Hi,
did you check on the WebCenter forum ?
WebCenter Portal
Frank

While accessing the WAS, Application cannot be started! is getting.

Hi All,
   I am facing this issue while accessing the WAS. I started the WAS and it is running. When i am accessing http://<hostname>:50000/, I am getting 503 error Service Unavailable Error.
Here are the details.
Details: com.sap.engine.services.servlets_jsp.server.exceptions.WebDeploymentException: Error in starting application sap.com/com.sap.engine.docs.examples.
     at com.sap.engine.services.servlets_jsp.server.container.StartAction.prepareStart(StartAction.java:97)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainer.prepareStart(WebContainer.java:379)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepare(StartTransaction.java:349)
     at com.sap.engine.services.deploy.server.application.StartTransaction.prepareLocal(StartTransaction.java:371)
     at com.sap.engine.services.deploy.server.application.ApplicationTransaction.makeAllPhasesLocal(ApplicationTransaction.java:370)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.runInTheSameThread(ParallelAdapter.java:118)
     at com.sap.engine.services.deploy.server.application.ParallelAdapter.makeAllPhasesLocalAndWait(ParallelAdapter.java:219)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationLocalAndWait(DeployServiceImpl.java:4323)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.startApplicationsInitially(DeployServiceImpl.java:2456)
     at com.sap.engine.services.deploy.server.DeployServiceImpl.clusterElementReady(DeployServiceImpl.java:2332)
     at com.sap.engine.services.deploy.server.ClusterServicesAdapter.containerStarted(ClusterServicesAdapter.java:41)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.processEvent(ContainerEventListenerWrapper.java:141)
     at com.sap.engine.core.service630.container.AdminContainerEventListenerWrapper.processEvent(AdminContainerEventListenerWrapper.java:19)
     at com.sap.engine.core.service630.container.ContainerEventListenerWrapper.run(ContainerEventListenerWrapper.java:101)
     at com.sap.engine.frame.core.thread.Task.run(Task.java:60)
     at com.sap.engine.core.thread.impl5.SingleThread.execute(SingleThread.java:73)
     at com.sap.engine.core.thread.impl5.SingleThread.run(SingleThread.java:134)
Caused by: java.lang.NoClassDefFoundError: com/sap/engine/services/servlets_jsp/server/runtime/context/ApplicationContext
     at com.sap.engine.services.servlets_jsp.server.container.WebContainerHelper.createDefaultContext(WebContainerHelper.java:483)
     at com.sap.engine.services.servlets_jsp.server.container.WebContainerHelper.createContext(WebContainerHelper.java:524)
     at com.sap.engine.services.servlets_jsp.server.container.StartAction.prepareStart(StartAction.java:50)
     ... 16 more
Can anybody help me.
Thanks in advance.
Regards
Chiranjeevi A

What kind of DNS settings should I try to change?
I already tried the "DNS Configuration for BSP Applications Under Windows 2000" since I'm working with Windows 2000 http://help.sap.com/saphelp_bw31/helpdata/en/9f/fc9c3b122efc6ee10000000a114084/content.htm
But it didn't work. I keep getting the same error.

"Event code: 3008 Event message: A configuration error has occurred" while accessing the sharepoint site.

Hello All,
Wish You Happy New Year to All in advance.
while accessing the share point site i got the error message
Server Error in '/' Application.
Configuration Error
Description: An error occurred during the processing of a configuration file required to service this request. Please review the specific error details below and modify your configuration file appropriately.
Parser Error Message: The element <forms> may only appear once in this section.
Source Error:
Line 104: 
Line 105: <forms loginUrl="/_layouts/log-in.aspx" />
Line 106: <forms loginUrl="/_layouts/log-in.aspx" />
Line 107: <forms loginUrl="/_layouts/log-in.aspx" />
Line 108: </authentication>
Source File: C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config    Line:
106
Version Information: Microsoft .NET Framework Version:2.0.50727.3662; ASP.NET Version:2.0.50727.3658
i have found event message in the event log
Event code: 3008
Event message: A configuration error has occurred.
Event ID: 523cefee6a0943948cf01b4e9f476fff
Event sequence: 77
Event occurrence: 76
Event detail code: 0
Exception information:
    Exception type: ConfigurationErrorsException
    Exception message: The element <forms> may only appear once in this section. (C:\Inetpub\wwwroot\wss\VirtualDirectories\4545\web.config line 106)
Request information:
    Request URL: http://beesppesxapp70:4545/_vti_bin/sitedata.asmx
    Request path: /_vti_bin/sitedata.asmx
    User host address: 172.16.20.80
    User:
    Is authenticated: False
    Authentication Type:
    Thread account name: abc\wss_setup
Thread information:
    Thread ID: 1
    Thread account name: abc\wss_setup
    Is impersonating: False
    Stack trace:    at System.Configuration.BaseConfigurationRecord.EvaluateOne(String[] keys, SectionInput input, Boolean isTrusted, FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult)
   at System.Configuration.BaseConfigurationRecord.Evaluate(FactoryRecord factoryRecord, SectionRecord sectionRecord, Object parentResult, Boolean getLkg, Boolean getRuntimeObject, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSectionRecursive(String configKey, Boolean getLkg, Boolean checkPermission, Boolean getRuntimeObject, Boolean requestIsHere, Object& result, Object& resultRuntimeObject)
   at System.Configuration.BaseConfigurationRecord.GetSection(String configKey)
   at System.Web.Configuration.RuntimeConfig.GetSectionObject(String sectionName)
   at System.Web.Configuration.RuntimeConfig.GetSection(String sectionName, Type type, ResultsIndex index)
   at System.Web.Configuration.RuntimeConfig.get_Authentication()
   at System.Web.Security.FormsAuthenticationModule.Init(HttpApplication app)
   at System.Web.HttpApplication.InitModulesCommon()
   at System.Web.HttpApplication.InitInternal(HttpContext context, HttpApplicationState state, MethodInfo[] handlers)
   at System.Web.HttpApplicationFactory.GetNormalApplicationInstance(HttpContext context)
   at System.Web.HttpApplicationFactory.GetApplicationInstance(HttpContext context)
   at System.Web.HttpRuntime.ProcessRequestInternal(HttpWorkerRequest wr)
kindly advise me
Thank a lot in advance

Hi,
As per the error logs it seems you have the Form element twice in your web config file. Just take one or the other one out. if you did any changes in web. config file please share and elaborate little more about the changes if you have made recently before
the error.
Krishana Kumar http://www.mosstechnet-kk.com
Please mark the replies and Proposed as answer if they help and solve your issue

(409) Conflict Error while uploading the file into Sharepoint library

Getting the below error while uploading the file into Sharepoint library.
(409) Conflict. at System.Net.HttpWebRequest.GetResponse() at Microsoft.SharePoint.Client.SPWebRequestExecutor.Execute() at Microsoft.SharePoint.Client.File.SaveBinary(ClientContext context, String serverRelativeUrl,
Stream stream, String etag, Boolean overwriteIfExists
I have used the below code:
ClientOM.File.SaveBinaryDirect(clientContext, "/Shared%20Documents/NewDocument.pptx", memoryStream, true);
Thanks in advance.

May be issue is with path.
https://server/ should be there instead of
subsite path(https://server/path/path)
in the client context
Check the below link
http://social.msdn.microsoft.com/Forums/sharepoint/en-US/fbb38b10-1127-48a6-a65f-0301edd766c4/the-remote-server-returned-an-error-409-conflict-error-while-uploading-files-to-sharepoint?forum=sharepointdevelopmentlegacy

Configure Synchronization Connections An error has occurred while accessing the SQL Server database

Hi,
i am getting following error message
Central Administration --> Synchronization Connections
An error has occurred while accessing the SQL Server database or the SharePoint Server Search service.
If this is the first time you have seen this message, try again later. If this problem persists, contact your administrator.
Central Administration --> Manage Profile Service: User Profile Service Application --> Manage User Properties
Error
An unexpected error has occurred.
Troubleshoot issues with Microsoft SharePoint Foundation.
Correlation ID: 3bce5a11-f2dc-4788
Please tell how to fix it.
iffi

Event ID 5555 -> i have change the Timer jobs recycling time AM to PM
for User profile page not display number of count in the page first check services , connection ,
IISRESET /NOFORCE / timer services restart
Deepesh Yevle MCTS

Issue while playing the content of Azure Media Services after deleting the channel.

Hi,
We are having the issue while playing the content of Azure Media Services after deleting the channel.
Please find detail scenarios below:
We have done live streaming of an event using Azure Media Services, event was around 5-6 hrs. After completion of event channel was deleted, when we checked content data
it was only 1hr. Content has only last 1 hr. recording, we are unable to get full recoding.
We divided event into two parts to avoid above issue. After completion of 1st part which was of 2 hrs., we stopped the streaming and deleted the channel. New channel was
created and streaming was started for 2<sup>nd</sup> part, after completion of event channel was deleted. Now we are unable to play the content data for 1st part but able to play the 2nd part of event through content publish URL.
We have done streaming of 3 hrs. event on 18th April with same process and full recoding was available.
Can you let me know what might be the issue?

Hi,
Please refer to Justin’s blog and see if it helps:
http://www.justinkobel.com/post/2012/04/30/SharePoint-2010-Claims%E2%80%93Operation-is-not-valid-due-to-the-current-state-of-the-object.aspx
As suggested by Alex, please provide more information about your process of changing password.
Here is an article for updating passwords on SharePoint 2010:
http://blogs.technet.com/b/seanearp/archive/2011/01/25/updating-passwords-on-sharepoint-2010.aspx
Regards,
Rebecca Tu
TechNet Community Support

We couldn't refresh the connection 'OData Assignements Data' Error : While access the project overveiw report in brower and in Excel 2013.

Hello All,
Facing this issue while opening the ProjectOverview report in Browers or in Excel 2013.
Snapshot is attached for furthur reference.
Error in Excel when clicking on Refresh All, it shows the information to retieving the data but after few moments it prompt this error.
Second snapshot occurs while opening the report in browser.
Kindly help.
REGARDS DANISH DANIE

Dear Paul,
1st Query,
Ans: As I'm using Project Server Permission mode and im logged with the user who is the member of admin group and in administrator group 'Access
Project Server Reporting Service' is ticked on. So, the concern regarding permission is resolved.
2nd Query,
Ans: Im unable to find Project Web App Permission for Excel Web App Refresh' feature in site setting
of PWA.
Snapshot is attached when trying to open report in browser.
to resolve this followed below mentioned URL but unsuccessfull result
http://support.microsoft.com/kb/2769345/en-us
Still facing same issue, issue is not resolved kindly help/suggest.
Note: Im using Project Server 2013 not Project Online 2013.

Error while accessing the Oracle iProcurement Page

Hi,
While accessing the iProcurement page, I am encountering the error
"oracle.apps.fnd.framework.OAException: oracle.adf.mds.exception.MDSRuntimeException: Unable to find component with absolute reference = /oracle/apps/icx/icatalog/shopping/webui/ShoppingHomePG, XML Path = {1}. Please verify that the reference is valid and the definition of the component exists either on the File System or in the MDS Repository."
Please help me on this.
Thanks,
Rohit Subudhi

Hi,
The issue which I was facing was for some personalization in the page.
I was trying to extend the Controller of the Page at the responsibility but some how it affected at Site level.
Now I have deleted the personalization from Functional Administrator Responsibility and now the page is working fine. Anyways thanks for the reply Apurba.
Regards,
Rohit

500 Internal Server Error while accessing the report on portal

All,
We are on BI7. have few queries on portal and recently while accessing the queries user is getting the 500 Internal Server Error. The error message is like below:
500 Internal Server Error
Failed to process request; contact your system administrator
BEx Web Application " I_Qnc()2ex.........(etc) does not exist.The application was either ended by a timout or an error occured.
Recently most of the users started getting this problem and it is on a high resolution to be resolved.
Any suggestion greatly appreciated.
Regards
Vijay

Hi
This is mostly TimeOut Error.
However, 500 Error applies to variety of problems within the server.
Please make a back up of your query and restrict it further so it populates less data.
If the report is running properly for less range of data, that's a timeout issue.
Otherwise you will have to recheck the query. Mostly these are timeouts because, in general production data is high and if there us less restriction, the query OLAP time and front-end time will be more than optimized.
Cheers
Sri

ABAP Dump issue while accessing Gateway

Hi
We have recently upgraded our Gateway server to SP03. Eversince after service generation while accessing the XML/Metadata from the consumption page we get an HTTP error with Dump. Has anyone faced this problem before.
<?xml version="1.0" encoding="utf-8" ?>
- <error xmlns:xsi="http://www.w3.org/2001/XMLSchema-Instance">
<code>HTTP/500/E/Internal Server Error</code>
<message>Call of service /sap/opu/sdata/sap/Z14335_RFC_BP_1/ terminated because of an error. The following error text was processed in system AC1 : Syntax error in program /IWCOR/CL_REST_HTTP_HANDLER===CP .The error occurred on the application server njsapnet3. The termination type was: RABAX_STATE.If the termination type is RABAX_STATE, you will find more information on the cause of termination in system AC1 in transaction ST22. If the termination type is ABORT_MESSAGE_STATE, you will find more information on the cause of termination on the application server njsapnet3 in transaction SM21. If the termination type is ERROR_MESSAGE_STATE, you can search for further information in the trace file for the work process in transaction ST11 on the application server njsapnet3. You may also need to analyze the trace files of other work processes. If you do not yet have a user ID, contact your system adminmistrator.</message>
</error>

Hi All,
I am also facing the same issue.
When i am executing query/read operation my service it will works properly and getting data also,but when i am trying get X-CSRF token it throws error(ABAP Dump) .Can you please help me out this issue.
Based on the Tx: ST11..getting below log.
A ABAP Program /IWCOR/CL_REST_HTTP_HANDLER===CP        .
A Source /IWCOR/CL_REST_HTTP_HANDLER===CCIMP      Line 40.
A Error Code ASSERTION_FAILED.
A Module abassert.c.
A Function ab_aabAssertionFailedRabax Line 1880.
A ** RABAX: level LEV_RX_STDERR completed.
A ** RABAX: level LEV_RX_RFC_ERROR entered.
A ** RABAX: level LEV_RX_RFC_ERROR completed.
A ** RABAX: level LEV_RX_RFC_CLOSE entered.
A ** RABAX: level LEV_RX_RFC_CLOSE completed.
A ** RABAX: level LEV_RX_IMC_ERROR entered.
A ** RABAX: level LEV_RX_IMC_ERROR completed.
A ** RABAX: level LEV_RX_DATASET_CLOSE entered.
A ** RABAX: level LEV_RX_DATASET_CLOSE completed.
A ** RABAX: level LEV_RX_ERROR_SAVE entered.
A ** RABAX: level LEV_RX_ERROR_SAVE completed.
A ** RABAX: level LEV_RX_ERROR_TPDA entered.
A ** RABAX: level LEV_RX_ERROR_TPDA completed.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI entered.
A ** RABAX: level LEV_RX_PXA_RELEASE_RUDI completed.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP entered.
A ** RABAX: level LEV_RX_LIVE_CACHE_CLEANUP completed.
A ** RABAX: level LEV_RX_END entered.
A ** RABAX: level LEV_RX_END completed.
N
N Thu Jan 03 15:00:58 2013
N *** ERROR => System ID and client from ticket are not the same than mine. [ssoxxkrn.c   1065]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
N *** ERROR => Neither was ticket issued by myself nor can I find issuer in TWPSSO2ACL (see note 1055856). [ssoxxkrn.c   1071]
N {root-id=0050569E07B31ED295B108EAC1527575}_{conn-id=0050569E07B31ED295B108EABC707575}_1
i am getting based on Tx:ST22
Category
ABAP Programming Error
Runtime Errors
ASSERTION_FAILED
ABAP Program
/IWCOR/CL_REST_HTTP_HANDLER===CP
Application Component OPU-FND-CCL
Note: I am using SAP NW-GW-SP04
Thanks,
Syam

An error occurred while accessing the content repository from JDeveloper

Hello,
I'm using Jdeveloper Studio Edition Version 11.1.1.5.0
I created Content Repository conection, following:
RIDC Socket Type: socket
Server hostname: localhost
Content Server Listener Port: 4444
Executing "Teste Connection" result "Success!"
But, trying connect, I receive:
oracle.webcenter.content.internal.model.rc.AbstractRepositoryLogic listFolder
An error occurred while accessing the content repository.
and when I login to my portal and go to administration page, then I am getting this error
"Messages for this page are listed below.
Could not retrieve members from policy store.
and when I go to services tab then i am getting this error "The Documents service is unavailable.
Error contacting the content repository."
Please help me to resolve this problem.
Thank You,
Muhammad Nasir

can anybody help me to resolve this issue please.

Error occurred while accessing the safe array

I am using HFM 931. One of the users are getting this error.
Error occurred while accessing the safe array. Error Reference Number: {9F7B34B7-4698-48B3-9F2B-A89715675639}
Num: 0x80040211;Type: 1;DTime: 20/10/2009 14:34:08;Svr: UK-SUT-TD-FWEB1;File: CHFMwDataGrid.cpp;Line: 5889;
Can you please help me fix this issue?
Thanks
Hemanth
Edited by: HemanthK on Nov 6, 2009 10:00 AM

there are many different causes for safe array error messages.
i would advise to contact support before looking for help for safe array messages in the forums. if you open an SR be sure to attach HsvEventLog.log file from all application servers in the environment so that the support engineer can check them.
if the message it is restricted to one specific user it may be related to that users preferences / POV settings in the appname_USERPARAMS database table. you may like to try to remove the userparams for that specific user from the table. before you do this you need to make sure that HFM (all HFM related processes and services) is stopped on all servers in the environment and that you have a recent backup of the HFM database.
also please make sure you have patched your 9.3.1 HFM to 9.3.1 SP 4 + SF's 9.3.1.4.01, 9.3.1.4.03 and 9.3.1.4.05. it is recommended that all HFM 9.3.1 administrators have applied all of the above Service Packs and Service Fixes.

Issue while accessing the SharePoint site - SharePoint 2010 - after Password update

Similar Messages

Maybe you are looking for