Issue with applying SQL Server 2014 CU6
Anyone had an issue like this when applying CU6... I have a single server/single instance 2014 installation running SQL SRVR, SSAS, SSRS, SSIS...
SSAS, SSRS, and SSIS all upgraded to 12.0.2480.0, but SQL Server did not. The summary file has the generic failure message below:
Instance MSSQLSERVER overall summary:
Final result: The patch installer has failed to update the shared features. To determine the reason for failure, review the log files.
Exit code (Decimal): -2061893565
Start time: 2015-03-13 10:56:18
End time: 2015-03-13 10:59:59
Requested action: Patch
After reboot everything came up fine, but now I am left wondering how to troubleshoot this. The detail log is huge and doesn't show a clear indication of what the issue might be. Anyone have any guidance on troubleshooting? I have searched
the web and found some results for earlier versions... but nothing terribly helpful.
To close this out, I'd like to note that I finally was able to get to a meaningful error message:
"The User Data directory in the registry is not valid. Verify DefaultData key under the instance hive points to a valid directory. Error code: 0x851A0043"
The error resulted from an earlier relocation of the default data location. A registry entry for DefaultData in HKEY_LOCAL_MACHINE\SOFTWARE\Microsoft\Microsoft SQL Server\MSSQL12.MSSQLSERVER\MSSQLServer was incorrectly pointing to an obsolete drive
letter. Correcting the drive letter was all that was needed. I am now successfully at version 12.0.2480.0.
Similar Messages
-
Trouble Turneing on FileStream/Ad Hoc Query with new SQL Server 2014 64-BIt Version
SQL Server Help,
I have recently installed SQL SERVER 2014 on my Window 7 SP1 Acer laptop.
I am trying to do a simple upload of an Excel file into SQL Server using the OPENROWSET command:
Which I found requires some configuration change I attempted below.
When I execute this:
execute sp_configure 'show advanced options', 1;
RECONFIGURE;
execute sp_configure 'Ad Hoc Distributed Queries', 1;
RECONFIGURE;
GO
I get this message
Configuration option 'show advanced options' changed from 1 to 1. Run the RECONFIGURE statement to install.
Msg 5593, Level 16, State 1, Line 2
FILESTREAM feature is not supported on WoW64. The feature is disabled.
Msg 15123, Level 16, State 1, Procedure sp_configure, Line 62
The configuration option 'Ad Hoc Distributed Queries' does not exist, or it may be an advanced option.
Msg 5593, Level 16, State 1, Line 4
FILESTREAM feature is not supported on WoW64. The feature is disabled.
When I go to the SQL Server Services and Properties on the Server and try to change the FileStream options to be on..I get the error:
"There was an unknown error applying the FILESTREAM settings. Check the parameters are valid (0x80070002)."
Perhaps my issue is with the Windows Share Name: . I have put in a local driver C:\A_Excel....also the computer name, my user ID. Is there a special format or way to define a Share Name that I am unaware of?
Is there a way to fix this? Can I not load Excel files with a 64-Bit system? Or what is the easiest way that I can do this with my configuration?
Thanks for any help.FILESTREAM feature is not supported on WoW64. The feature is disabled.
By the error message it seems you have a 64 bit OS, but have installed a 32 bit SQL Server and here in WoW64 mode filestream seems to be not supported. Install a 64 bit SQL Server instead.
Olaf Helper
[ Blog] [ Xing] [ MVP] -
Credentials issue with MS SQL Express 2014
Hello,
I have kind of simple issue but I failed to resolve it. Here's the issue:
I have SQL Server Express 2014 installed on my PC. I have to use SQL Server authentication. As 'sa' I created login and user e.g. user1. Then as user1 I created DB e.g. db1 and a few tables. Now I could login into db1 as user1 using SQL Server authentication.
This db1 will be used by application e.g. app1. This app1 has configuration file that has all credentials and other connection string things. Well when I start that application it throws error "Can't connect to database". Then I look into log and
see this: Error: 18456, Severity: 14, State: 8. Login failed for user 'user1'. Reason: Password did not match that for the login provided . Then I could disable credential check in configuration file of app1 and then I don't have problem to start app1.
Then I tried to created ODBC connection and use the same credentials and I succeed to connect. Could some give the idea what could be wrong and I can't connect to db1 from my app1? ThanksReset the password of the login, i have already this problem.
Not forget the connection string syntaxe, do not make the space after and before (=) example :
Server=myServerAddress;Database=myDataBase;User
Id=myUsername;
Password=myPassword;
Thanks for suggestion ... but could you please tell me why to reset login password ( I could use this password successfully when login from Studio i.e. it's correct.
Could you please give me sqlcmd example how to connect to my db1 using connection string. That way I should be able to check which users are capable to login.
N.B. I am planning to play with Trusted Connection because Shanky_621 suggested that value 'false' (like in my case means Windows Authentication). In my case user1 is not Windows user .. it's SQL Authentication user.
Thanks -
Having issues with getting SQL Server Express to start services and run.
Good afternoon everyone,
I have been working on a 2012 R2 server getting ready to move databases to new hardware. I had SQL Server Express 2008 R2 running on this server with no issues. I was handed another software package that ran SQL Express 2012 and had to for compatibility
reasons. I have had multiple versions run on Server 2012 before with no issues. This time, not so lucky. When the installer from the updated package put on SQL Express 2012 it completed with errors ( error log posted at the end of post) and
would not allow me to run software. I then tried the db that I had installed on 2008 R2 and it also gave the same error as the 2012 version. IN basic terms the required services attempted to start and shut back down again. I have received
Error 1068 about database handles and error %%945. I know this db has plenty of space and the permissions were added for the Admin account to access both db's. I then uninstalled both versions and tried again, with the same errors listed when
I tried to start the services. I am thinking that a clean install would fix the issue however I am not certain what files/folders/reg entries need to be deleted or modified. I have researched all the errors I can find, however I am very
new with SQL anything so I know I am missing something. I also do not have an "E:" drive on this server (not sure why it is going there). Input would be very welcome as I am not certain where to go from here.
Thanks,
Matt
Error Log follows, server and domain names have been blacked out with ****.
2015-04-15 11:57:55.16 Server Microsoft SQL Server 2012 (SP1) - 11.0.3128.0 (X64)
Dec 28 2012 20:23:12
Copyright (c) Microsoft Corporation
Express Edition (64-bit) on Windows NT 6.2 <X64> (Build 9200: ) (Hypervisor)
2015-04-15 11:57:55.16 Server (c) Microsoft Corporation.
2015-04-15 11:57:55.16 Server All rights reserved.
2015-04-15 11:57:55.16 Server Server process ID is 4104.
2015-04-15 11:57:55.16 Server System Manufacturer: 'HP', System Model: 'ProLiant ML350p Gen8'.
2015-04-15 11:57:55.16 Server Authentication mode is WINDOWS-ONLY.
2015-04-15 11:57:55.16 Server Logging SQL Server messages in file 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG'.
2015-04-15 11:57:55.17 Server The service account is 'NT AUTHORITY\LOCAL SERVICE'. This is an informational message; no user action is required.
2015-04-15 11:57:55.17 Server Registry startup parameters:
-d C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\master.mdf
-e C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Log\ERRORLOG
-l C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\DATA\mastlog.ldf
2015-04-15 11:57:55.17 Server Command Line Startup Parameters:
-s "SQLEXPRESS"
2015-04-15 11:57:55.48 Server SQL Server detected 1 sockets with 6 cores per socket and 12 logical processors per socket, 12 total logical processors; using 8 logical processors based on SQL Server licensing. This is an informational message;
no user action is required.
2015-04-15 11:57:55.48 Server SQL Server is starting at normal priority base (=7). This is an informational message only. No user action is required.
2015-04-15 11:57:55.48 Server Detected 8157 MB of RAM. This is an informational message; no user action is required.
2015-04-15 11:57:55.48 Server Using conventional memory in the memory manager.
2015-04-15 11:57:55.68 Server This instance of SQL Server last reported using a process ID of 7840 at 4/15/2015 11:57:47 AM (local) 4/15/2015 3:57:47 PM (UTC). This is an informational message only; no user action is required.
2015-04-15 11:57:55.68 Server Node configuration: node 0: CPU mask: 0x00000000000000ff:0 Active CPU mask: 0x00000000000000ff:0. This message provides a description of the NUMA configuration for this computer. This is an informational message
only. No user action is required.
2015-04-15 11:57:55.69 Server Using dynamic lock allocation. Initial allocation of 2500 Lock blocks and 5000 Lock Owner blocks per node. This is an informational message only. No user action is required.
2015-04-15 11:57:55.72 Server Software Usage Metrics is disabled.
2015-04-15 11:57:55.73 spid5s Starting up database 'master'.
2015-04-15 11:57:55.79 spid5s 20 transactions rolled forward in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.79 spid5s 0 transactions rolled back in database 'master' (1:0). This is an informational message only. No user action is required.
2015-04-15 11:57:55.80 Server CLR version v4.0.30319 loaded.
2015-04-15 11:57:55.86 spid5s Service Master Key could not be decrypted using one of its encryptions. See sys.key_encryptions for details.
2015-04-15 11:57:55.89 Server Common language runtime (CLR) functionality initialized using CLR version v4.0.30319 from C:\Windows\Microsoft.NET\Framework64\v4.0.30319\.
2015-04-15 11:57:55.91 spid5s SQL Server Audit is starting the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.91 spid5s SQL Server Audit has started the audits. This is an informational message. No user action is required.
2015-04-15 11:57:55.94 spid5s SQL Trace ID 1 was started by login "sa".
2015-04-15 11:57:55.94 spid5s Server name is '********\SQLEXPRESS'. This is an informational message only. No user action is required.
2015-04-15 11:57:55.96 spid5s Failed to verify Authenticode signature on DLL 'C:\Program Files\Microsoft SQL Server\MSSQL11.SQLEXPRESS\MSSQL\Binn\ftimport.dll'.
2015-04-15 11:57:55.96 spid5s Starting up database 'msdb'.
2015-04-15 11:57:55.96 spid9s Starting up database 'mssqlsystemresource'.
2015-04-15 11:57:55.96 spid5s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:55.96 spid5s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:55.96 spid5s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBData.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:55.96 spid5s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:55.96 spid5s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:55.96 spid5s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\MSDBLog.ldf" may be incorrect.
2015-04-15 11:57:55.99 spid9s The resource database build version is 11.00.3000. This is an informational message only. No user action is required.
2015-04-15 11:57:56.02 spid12s A self-generated certificate was successfully loaded for encryption.
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv6> 53345].
2015-04-15 11:57:56.03 spid12s Server is listening on [ 'any' <ipv4> 53345].
2015-04-15 11:57:56.03 spid12s Server local connection provider is ready to accept connection on [ \\.\pipe\SQLLocal\SQLEXPRESS ].
2015-04-15 11:57:56.03 spid12s Server named pipe provider is ready to accept connection on [ \\.\pipe\MSSQL$SQLEXPRESS\sql\query ].
2015-04-15 11:57:56.04 spid12s Dedicated administrator connection support was not started because it is disabled on this edition of SQL Server. If you want to use a dedicated administrator connection, restart SQL Server using the trace flag 7806.
This is an informational message only. No user action is required.
2015-04-15 11:57:56.04 Server SQL Server is attempting to register a Service Principal Name (SPN) for the SQL Server service. Kerberos authentication will not be possible until a SPN is registered for the SQL Server service. This is an informational
message. No user action is required.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:SQLEXPRESS ] for the SQL Server service. Windows return code: 0xffffffff, state: 53.
Failure to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been
manually registered.
2015-04-15 11:57:56.04 Server The SQL Server Network Interface library could not register the Service Principal Name (SPN) [ MSSQLSvc/********.****.local:53345 ] for the SQL Server service. Windows return code: 0xffffffff, state: 53. Failure
to register a SPN might cause integrated authentication to use NTLM instead of Kerberos. This is an informational message. Further action is only required if Kerberos authentication is required by authentication policies and if the SPN has not been manually
registered.
2015-04-15 11:57:56.09 spid9s Starting up database 'model'.
2015-04-15 11:57:56.10 spid9s Error: 17204, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FCB::Open failed: Could not open file e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf for file number 1. OS error: 3(The system cannot find the path specified.).
2015-04-15 11:57:56.10 spid9s Error: 5120, Severity: 16, State: 101.
2015-04-15 11:57:56.10 spid9s Unable to open the physical file "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\model.mdf". Operating system error 3: "3(The system cannot find the path specified.)".
2015-04-15 11:57:56.10 spid9s Error: 17207, Severity: 16, State: 1.
2015-04-15 11:57:56.10 spid9s FileMgr::StartLogFiles: Operating system error 2(The system cannot find the file specified.) occurred while creating or opening file 'e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf'.
Diagnose and correct the operating system error, and retry the operation.
2015-04-15 11:57:56.10 spid9s File activation failure. The physical file name "e:\sql11_main_t.obj.x86release\sql\mkmastr\databases\objfre\i386\modellog.ldf" may be incorrect.
2015-04-15 11:57:56.10 spid9s Error: 945, Severity: 14, State: 2.
2015-04-15 11:57:56.10 spid9s Database 'model' cannot be opened due to inaccessible files or insufficient memory or disk space. See the SQL Server errorlog for details.
2015-04-15 11:57:56.10 spid9s SQL Trace was stopped due to server shutdown. Trace ID = '1'. This is an informational message only; no user action is required.
Hi HMLunger,
Did you install the SQL Server instance successfully? If not, please help to post the summary and detail logs for analysis. By default, the logs can be found in: C:\Program Files\Microsoft SQL Server\110\Setup Bootstrap\Log.
However, if you fail to start SQL Server Express service after successfully installing SQL Server,
you might have to change the paths of the files by running the following scripts from the command prompt. For more details, please review this similar
thread.
NET START MSSQL$SQLEXPRESS /f /T3608
SQLCMD -S .\SQLEXPRESS
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE model MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
go
exit;
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
ALTER DATABASE msdb MODIFY FILE (NAME = logical_name , FILENAME = 'new_path\os_file_name');
NET STOP MSSQL$SQLEXPRESS
In addition, you can follow the steps in this KB article to uninstall SQL Server.
Thanks,
Lydia Zhang
Lydia Zhang
TechNet Community Support -
PI 7.0 - jdbc receiver issue with MS SQL Server
Hello Experts,
I have a jdbc receiver scenario on PI 7.0 for just one table on MS SQL Server and I'm using the update_insert action.
When the entry does not exist it is created normally and returns insert_count=1 and update_count=0.
When the entry already exists, it's generated the statements for insert and for update (the 2 statements are visible on RWB) and returns insert_count=0 and update_count=0.
Any error occurs and in the RWB the log shows the request was processed with success.
I've already enabled the log for sql statements on the channel, but the statements are correct.
I've reviewed also the <key> tag on the mapping and it's ok.
Any suggestion to try fix this issue?
Thank you very much.Can you please check in the database the format of the specified fields in the update statement. Sometime we can have situations that the insert works but the subsequent update fails. An example:
Suppose key field1 value being passed from XI is '1234' in characters but in db it is stored as '00001234'.
Regards,
Indranil -
Firewall issue with centralized SQL server - port 52384
Hi,
I have dedicated, centralized MS SQL 2012 server for our internal infrastructure with few instances. There is dedicated named instance SC for SC Family Products running on TCP port 1435. Also Server Browser running on UDP 1434 is enabled. I'm trying to install
SCOM 2012 R2. I got to the step Configure the Operational Database and here, I encountered a problem. I try to connect to my SQL server and put into
Server name and instance name SQL\SC and into SQL Server port 1434 or 1435, it doesn't connect. If I turn off firewall on SQL server, it connects without problems. On SQL server, I already have allowed incoming communication on ports UDP 1434
and also TCP 1433-1436. Than, I found out, that I need to allow in TCP 135 so I did it. It didn't work. Than I allowed TCP 49154-49157 for reporting services - it still didn't work. Last thing I allowed (using Microsoft Network Monitor) was TCP port 52384
and suddenly, it worked .
I know what UDP 1434 and TCP 1433-1436 are for. Also, I understand why I have to open 135 and 49154-49157. But I am pretty confused by the port 52384 - what is it for ? Why it isn't mentioned in documentation ? I am pounding with this problem for a while,
and also, I found out, that my SC VMM is not working, if I do not allow all of these ports - so, probably not only used by SCOM ?
Can anyone explain what's that port for ? Or why it's not enough to open 1434, 1433-1436, 135 and 49154-49157 ?
Thanks
TomasHi,
I didn't install SCOM yet. I am stuck at installation, till I figure out why port 52384 needs to be opened.
1. My SQL Server Configuration Manager is set like this:
Protocols for SC - TCP/IP Enabled
IP2
Active : Yes
Enabled : Yes
IP Address : ipv4 ip address of server
TCP Dynamic Ports : (blank)
TCP Port : 1435
So, that should be ok, right?
2. If I turn off firewall on SQL, everything connects ok - so based on that, I suppose that SCOM server firewall is configured ok . It's issue on SQL.
On SQL server, I have these inbound rules:
COM+ Network Access (DCOM-In) - TCP 135 enabled
HTTP/HTTPS - TCP 80,443 enabled
SCOM Reporting - TCP 49154-49157 enabled
SQL UDP ports - UDP 1433-1437 enabled
SQL TCP ports - TCP 1433-1435 enabled
SCOM 52384 - TCP 52384 enabled <- this is the port I don't understand, why it should be opened
If I disable any of these rules, my connection will not pass. I figured out those ports using Microsoft Network Monitor on SQL server.
3. Those databases do not exist yet. I am stuck at 3th step of Operations Manager Setup - at Configure the operational database.
There are fields Server name and instance name, SQL Server port, Database name, Database size, Data file folder, Log file folder
. First two are writable and the rest is greyed out. If I don't turn off firewall and I don't enable all rules from point 2 on SQL server and than put in the SQL server name with instance (SQL\SC) and port 1434 (or 1435) it gives
me red cross, and rest of the page stays greyed out - so, it's unable to connect. If I turn off firewall, or enable all the rules in previous point (2) I am able to change name of the database, database size, data/log file folder. But if I disable any
of those ports, it stays greyed out - I am concerned about port 52384, why it should be opened? What is it for? Why it isn't mentioned in any documentation? Or am I doing something wrong?
Thanks
Tomas -
Issue with Microsoft SQL Server, according to SAP (LMB)
We are upgrading our SAP Solution Manager and ran into a problem. SAP has passed it on to Microsoft because it appears to be an issue with our MS SQL data base. So we get a question back from Microsoft that says - -
First, you are running SAPJVM1.4 and for a 1.4 environment the 1.2
version of the Microsoft SQL Server driver must be used.
So how can I find the version number for our Microsoft SQL Server driver ?? Thanks, Jim WellsThat is a difficult topic. Some articles:
http://blogs.msdn.com/b/sqlcat/archive/2010/10/26/how-to-tell-which-version-of-sql-server-data-access-driver-is-used-by-an-application-client.aspx
http://technet.microsoft.com/en-us/library/ms181099.aspx
http://www.mssqltips.com/sqlservertip/2198/determine-which-version-of-sql-server-data-access-driver-is-used-by-an-application/
Kalman Toth Database & OLAP Architect
IPAD SELECT Query Video Tutorial 3.5 Hours
New Book / Kindle: Exam 70-461 Bootcamp: Querying Microsoft SQL Server 2012 -
We have replaced a SQL Server 2005 with a SQL Server 2014 (new physical server.) Have the new server set up to use SQL Server login OR Windows user login. Had old server connecting (for a particular DB) to front end Access (2010 or 2013) as guest for
anyone logged into the Windows NT Network with a read only ODBC connection. Have the DB in the new server set to include guest as db_datareader (with only SELECT permission for the securables of each table and view being linked) but when any Windows user not
specifically listed as a SQL DB user tries to use the front end they get an error of:
Microsoft SQL Server Login
Connection failed:
SQL State: '28000'
SQL Server Error: 18456
[Microsoft][OCBC SQL Server Driver][SQL Server] Login failed for user {domain\user}.
After closing that pop-up window a server login window appears. Of course, since the guest user is not specifically listed as a user in the DB that fails also. It seems like there should be a very simple solution to this, but I can't seem to find it. I want
to allow anyone logged in on the Windows system (locally) to be able to open the MS Access file (on their work station machine) and run their own (read only; select) queries on the SQL Server database. Any suggestions?
Thanks a billion in advance ----Thanks for the response Olaf. I have now spent weeks researching this. I realize that using the guest account in most situations is not advised. As mentioned, I have restricted the guest account to allow the db_datareader role only, and have explicitly denied
all other roles, as well as allowing select only, and still have no access for the guest account.
The suggested fix in the second link you provided, of using Windows groups is not plausible for my situation either. We are a scientific field research institution, with a few long term users and lots of users that may have Windows accounts for a few months,
and then they are gone. It would be a nightmare for the network tech to try to keep a group account up to date, and we need to give access (read only, of course) to anyone logged into the system. Realize that the ONLY access of any kind to this database is
thru MS Access ACCDB, using a (by default) read only OCDB connection.
This type of access is used particularly because researchers need to be able to set up their own queries, and the MS Access query interface is particularly convenient for people who are not themselves SQL experts, yet are trying to get some very advanced
levels of output. Putting the database online is not practical because then we are back to the need for a comprehensive query interface, and just picking up general subsets of the data online (from a basic web page search feature) would be out of the question,
since the result set would involve hundreds of thousands if not millions of records.
So - that said - what exactly would you suggest, assuming we don't have the funds to buy a whole new system, and have spent plenty of money with Microsoft's Enterprise level MS Office so that all work stations have MS Access, and Microsoft's SQL Server,
as well as running our network on Microsoft's network software. -
I am getting following error while refreshing connection on excel sheet in power pivot gallery,
my scenario,
using BISM file connection to create and refresh power pivot excel sheet in power pivot gallery
throws error and we have sql server 2014 CU6 updated installed plus sharepoint 2013. i checked following msolap110.dll is available in our environment but assembly
Microsoft.AnalysisServices.ChannelTransport is not available.
i found error in event viewer,
"Activation context generation failed for "C:\Program Files\Microsoft Analysis
Services\AS OLEDB\110\msolap110.dll". Dependent Assembly
Microsoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
what should i do to fix it?
Thanks for help.
Deepak PatelRebecca,
yes, this is issue i am getting.
Activation
context generation failed for "C:\Program
Files\Microsoft Analysis Services\AS OLEDB\110\msolap110.dll".
Dependent AssemblyMicrosoft.AnalysisServices.ChannelTransport,processorArchitecture="MSIL",publicKeyToken="89845dcd8080cc91",version="11.0.0.0" could
not be found. Please use sxstrace.exe for detailed diagnosis.
let me know if you can find fix for it.
THanks, -
Hello all,
after populating the Toolbox of SSMS with the "Maintenance Plan Tasks" all task are disabled. The reason is simple a bad path to the DTS modules. The path in the Toolbox points to ...\DTSTasks\... Installation has created a path of ...\DTS\Tasks\...
This is clearly a bug. But perhaps there is a workaround by changing something in the configuration. Any idea where to look for the responsible configuration file?
Regards UweHi Uwe,
Based on my research, just as you said, the path of Maintenance Tasks in the Choose Toolbox Items dialog box points to ...\DTSTasks\..., but the actual path is...\DTS\Tasks\....I can reproduce the issue in my SQL Server 2014, SQL Server 2012 and SQL Server
2008 R2 environments. It seems that this is a known issue. But the issue doesn’t affect the use of maintenance tasks, we can still drag the tasks to design the maintenance plan.
If you have concern about this issue, it is my pleasure to help you to reflect your recommendation to the proper department for their consideration. Please feel free to submit your situation on our product to the following link
https://connect.microsoft.com/SQLServer/. Your feedback is valuable for us to improve our products and increase the level of service provided.
As to the issue that all tasks are disabled in the Toolbox of "Maintenance Plan Tasks", please make sure that you have selected the tasks in the Choose Toolbox Items dialog box. Then double-click the task in Toolbox pane or drag the task to maintenance
design tab.
Thanks,
Katherine Xiong
If you have any feedback on our support, please click
here.
Katherine Xiong
TechNet Community Support -
Unexpected Termination SSIS package - Issue with SSIS packages after upgrading to SQL Server 2014
Hello everyone.
We performed an upgrade of SQL Server 2012 installation to SQL Server 2014 (with last CU5 update). We found that all SSIS packages (even the simplest with just Execute SQL tasks) fail with Unexpected termination message. The issue reproduces with both new
packages (that are created from scratch with SSDT 2014) and old packages (migrated from SQL 2012).
Any ideas, please? We googled and found that it is a known issue that should have fixed with CU4. But we use CU5 and the issue is still here.
MCPHi. Yes...
- <Event xmlns="http://schemas.microsoft.com/win/2004/08/events/event">
- <System>
<Provider Name="SQLISServer" />
<EventID Qualifiers="0">1</EventID>
<Level>2</Level>
<Task>0</Task>
<Keywords>0x80000000000000</Keywords>
<TimeCreated SystemTime="2015-02-12T07:41:56.000000000Z" />
<EventRecordID>469950</EventRecordID>
<Channel>Application</Channel>
<Computer>abtru1a11.oneabbott.com</Computer>
<Security />
</System>
- <EventData>
<Data>The SSIS Execution Process could not write to the IS catalog: ABTRU1A11\DEV:SSISDB Error details: Cannot find the symmetric key 'MS_Enckey_Proj_Param_5', because it does not exist or you do not have permission.; at System.Data.SqlClient.SqlConnection.OnError(SqlException
exception, Boolean breakConnection, Action`1 wrapCloseInAction) at System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) at System.Data.SqlClient.TdsParser.TryRun(RunBehavior
runBehavior, SqlCommand cmdHandler, SqlDataReader dataStream, BulkCopySimpleResultSet bulkCopyHandler, TdsParserStateObject stateObj, Boolean& dataReady) at System.Data.SqlClient.SqlDataReader.TryConsumeMetaData() at System.Data.SqlClient.SqlDataReader.get_MetaData()
at System.Data.SqlClient.SqlCommand.FinishExecuteReader(SqlDataReader ds, RunBehavior runBehavior, String resetOptionsString) at System.Data.SqlClient.SqlCommand.RunExecuteReaderTds(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream,
Boolean async, Int32 timeout, Task& task, Boolean asyncWrite, SqlDataReader ds) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method, TaskCompletionSource`1 completion,
Int32 timeout, Task& task, Boolean asyncWrite) at System.Data.SqlClient.SqlCommand.RunExecuteReader(CommandBehavior cmdBehavior, RunBehavior runBehavior, Boolean returnStream, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader(CommandBehavior
behavior, String method) at System.Data.SqlClient.SqlCommand.ExecuteReader() at Microsoft.SqlServer.IntegrationServices.Server.Shared.ExecutionParameterLoader.GetExecutionParameter() at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.StartPackage()
at Microsoft.SqlServer.IntegrationServices.Server.ISServerExec.ProjectOperator.PerformOperation()</Data>
</EventData>
</Event>
MCP -
DB-Library BCP issue with SQL Server 2014
Hello,
My application uses DB-Library (ntwdblib.dll) to communicate with SQL Server 2014. We are having issues calling bcp related functions like bcp_init which always returns FAIL status. Our application was working fine with SQL Server 2012 and all other previous
SQL releases. But we are getting below error in SQL 2014,
msg 4801, state 1, severity 16 : Insert bulk is not supported over this access protocol.
Can anyone please help ?
Thanks,
HimanshuHi Himanshu_kus,
Is this still an issue, or can we close the thread?
[Personal Site] [Blog] [Facebook] -
Hello,
I have configured BizTalk Services Hybrid Connection between Standard Azure Website and SQL Server 2014 on premise.
Azure Management portal shows the status of Hybrid Connection as established.
However, the website throws an error when trying to open a connection
<
addname="DefaultConnection"
connectionString="Data
Source=machine name;initial catalog=AdventureWorks2012;Uid=demouser;Password=[my password];MultipleActiveResultSets=True"
providerName="System.Data.SqlClient"
/>
(The same website, with the same connection string deployed on SQL Server machine works correctly).
I tried various options with the connections sting (IP address instead of machine name, Trusted_Connection=False, Encrypt=False, etc. the result is the same
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.
I tried various machines - on premise and a clean Azure VM with SQL Server and it results in the same error - below full stack
The certificate chain was issued by an authority that is not trusted
Description: An unhandled exception occurred during the execution of the current web request. Please review the stack trace for more information about the error and where it originated in the code.
Exception Details: System.ComponentModel.Win32Exception: The certificate chain was issued by an authority that is not trusted
Source Error:
An unhandled exception was generated during the execution of the current web request. Information regarding the origin and location of the exception can be identified using the exception stack trace below.
Stack Trace:
[Win32Exception (0x80004005): The certificate chain was issued by an authority that is not trusted]
[SqlException (0x80131904): A connection was successfully established with the server, but then an error occurred during the login process. (provider: SSL Provider, error: 0 - The certificate chain was issued by an authority that is not trusted.)]
System.Data.SqlClient.SqlInternalConnection.OnError(SqlException exception, Boolean breakConnection, Action`1 wrapCloseInAction) +5341687
System.Data.SqlClient.TdsParser.ThrowExceptionAndWarning(TdsParserStateObject stateObj, Boolean callerHasConnectionLock, Boolean asyncClose) +546
System.Data.SqlClient.TdsParserStateObject.SNIWritePacket(SNIHandle handle, SNIPacket packet, UInt32& sniError, Boolean canAccumulate, Boolean callerHasConnectionLock) +5348371
System.Data.SqlClient.TdsParserStateObject.WriteSni(Boolean canAccumulate) +91
System.Data.SqlClient.TdsParserStateObject.WritePacket(Byte flushMode, Boolean canAccumulate) +331
System.Data.SqlClient.TdsParser.TdsLogin(SqlLogin rec, FeatureExtension requestedFeatures, SessionData recoverySessionData) +2109
System.Data.SqlClient.SqlInternalConnectionTds.Login(ServerInfo server, TimeoutTimer timeout, String newPassword, SecureString newSecurePassword) +347
System.Data.SqlClient.SqlInternalConnectionTds.AttemptOneLogin(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean ignoreSniOpenTimeout, TimeoutTimer timeout, Boolean withFailover) +238
System.Data.SqlClient.SqlInternalConnectionTds.LoginNoFailover(ServerInfo serverInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString connectionOptions, SqlCredential credential, TimeoutTimer timeout) +892
System.Data.SqlClient.SqlInternalConnectionTds.OpenLoginEnlist(TimeoutTimer timeout, SqlConnectionString connectionOptions, SqlCredential credential, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance) +311
System.Data.SqlClient.SqlInternalConnectionTds..ctor(DbConnectionPoolIdentity identity, SqlConnectionString connectionOptions, SqlCredential credential, Object providerInfo, String newPassword, SecureString newSecurePassword, Boolean redirectedUserInstance, SqlConnectionString userConnectionOptions, SessionData reconnectSessionData) +646
System.Data.SqlClient.SqlConnectionFactory.CreateConnection(DbConnectionOptions options, DbConnectionPoolKey poolKey, Object poolGroupProviderInfo, DbConnectionPool pool, DbConnection owningConnection, DbConnectionOptions userOptions) +278
System.Data.ProviderBase.DbConnectionFactory.CreatePooledConnection(DbConnectionPool pool, DbConnection owningObject, DbConnectionOptions options, DbConnectionPoolKey poolKey, DbConnectionOptions userOptions) +38
System.Data.ProviderBase.DbConnectionPool.CreateObject(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +732
System.Data.ProviderBase.DbConnectionPool.UserCreateRequest(DbConnection owningObject, DbConnectionOptions userOptions, DbConnectionInternal oldConnection) +85
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, UInt32 waitForMultipleObjectsTimeout, Boolean allowCreate, Boolean onlyOneCheckConnection, DbConnectionOptions userOptions, DbConnectionInternal& connection) +1057
System.Data.ProviderBase.DbConnectionPool.TryGetConnection(DbConnection owningObject, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal& connection) +78
System.Data.ProviderBase.DbConnectionFactory.TryGetConnection(DbConnection owningConnection, TaskCompletionSource`1 retry, DbConnectionOptions userOptions, DbConnectionInternal oldConnection, DbConnectionInternal& connection) +196
System.Data.ProviderBase.DbConnectionInternal.TryOpenConnectionInternal(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +146
System.Data.ProviderBase.DbConnectionClosed.TryOpenConnection(DbConnection outerConnection, DbConnectionFactory connectionFactory, TaskCompletionSource`1 retry, DbConnectionOptions userOptions) +16
System.Data.SqlClient.SqlConnection.TryOpenInner(TaskCompletionSource`1 retry) +94
System.Data.SqlClient.SqlConnection.TryOpen(TaskCompletionSource`1 retry) +110
System.Data.SqlClient.SqlConnection.Open() +96
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +44
[EntityException: The underlying provider failed on Open.]
System.Data.EntityClient.EntityConnection.OpenStoreConnectionIf(Boolean openCondition, DbConnection storeConnectionToOpen, DbConnection originalConnection, String exceptionCode, String attemptedOperation, Boolean& closeStoreConnectionOnFailure) +203
System.Data.EntityClient.EntityConnection.Open() +104
System.Data.Objects.ObjectContext.EnsureConnection() +75
System.Data.Objects.ObjectQuery`1.GetResults(Nullable`1 forMergeOption) +41
System.Data.Objects.ObjectQuery`1.System.Collections.Generic.IEnumerable<T>.GetEnumerator() +36
System.Collections.Generic.List`1..ctor(IEnumerable`1 collection) +369
System.Linq.Enumerable.ToList(IEnumerable`1 source) +58
CloudShop.Services.ProductsRepository.GetProducts() +216
CloudShop.Controllers.HomeController.Search(String SearchCriteria) +81
CloudShop.Controllers.HomeController.Index() +1130
lambda_method(Closure , ControllerBase , Object[] ) +62
System.Web.Mvc.ActionMethodDispatcher.Execute(ControllerBase controller, Object[] parameters) +14
System.Web.Mvc.ReflectedActionDescriptor.Execute(ControllerContext controllerContext, IDictionary`2 parameters) +193
System.Web.Mvc.ControllerActionInvoker.InvokeActionMethod(ControllerContext controllerContext, ActionDescriptor actionDescriptor, IDictionary`2 parameters) +27
System.Web.Mvc.Async.<>c__DisplayClass42.<BeginInvokeSynchronousActionMethod>b__41() +28
System.Web.Mvc.Async.<>c__DisplayClass8`1.<BeginSynchronous>b__7(IAsyncResult _) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethod(IAsyncResult asyncResult) +32
System.Web.Mvc.Async.<>c__DisplayClass39.<BeginInvokeActionMethodWithFilters>b__33() +58
System.Web.Mvc.Async.<>c__DisplayClass4f.<InvokeActionMethodFilterAsynchronously>b__49() +225
System.Web.Mvc.Async.<>c__DisplayClass37.<BeginInvokeActionMethodWithFilters>b__36(IAsyncResult asyncResult) +10
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeActionMethodWithFilters(IAsyncResult asyncResult) +34
System.Web.Mvc.Async.<>c__DisplayClass2a.<BeginInvokeAction>b__20() +23
System.Web.Mvc.Async.<>c__DisplayClass25.<BeginInvokeAction>b__22(IAsyncResult asyncResult) +99
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +50
System.Web.Mvc.Async.AsyncControllerActionInvoker.EndInvokeAction(IAsyncResult asyncResult) +27
System.Web.Mvc.<>c__DisplayClass1d.<BeginExecuteCore>b__18(IAsyncResult asyncResult) +14
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecuteCore(IAsyncResult asyncResult) +39
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.Controller.EndExecute(IAsyncResult asyncResult) +29
System.Web.Mvc.Controller.System.Web.Mvc.Async.IAsyncController.EndExecute(IAsyncResult asyncResult) +10
System.Web.Mvc.<>c__DisplayClass8.<BeginProcessRequest>b__3(IAsyncResult asyncResult) +25
System.Web.Mvc.Async.<>c__DisplayClass4.<MakeVoidDelegate>b__3(IAsyncResult ar) +23
System.Web.Mvc.Async.WrappedAsyncResult`1.End() +55
System.Web.Mvc.MvcHandler.EndProcessRequest(IAsyncResult asyncResult) +31
System.Web.Mvc.MvcHandler.System.Web.IHttpAsyncHandler.EndProcessRequest(IAsyncResult result) +9
System.Web.CallHandlerExecutionStep.System.Web.HttpApplication.IExecutionStep.Execute() +9651188
System.Web.HttpApplication.ExecuteStep(IExecutionStep step, Boolean& completedSynchronously) +155
Version Information: Microsoft .NET Framework Version:4.0.30319; ASP.NET Version:4.0.30319.36213
Regards,
Michal
Michal MorciniecSame issue here, looking for more information !
-
Issue of Text Qualiffier after upgrading to SQL Server 2014 Standard
Hi,
I'm facing an issue of Text Qualifier after I upgrading my system to SQL Server 2014 Standard Edition (Microsoft SQL Server 2014 - 12.0.2000.8 (X64)
Feb 20 2014 20:04:26
Copyright (c) Microsoft Corporation
Standard Edition (64-bit) on Windows NT 6.3 <X64> (Build 9600: ) (Hypervisor)
I have a csv file with format: Text Qualifier is double pipes ||, Vertical Bar (|) as Column Delimiter and Row Delimiter is CRLF.
For example file:
||Col1|||||Col2||
||ABC|||||XYZ||
This file is working OK in SQL Server 2008 R2 (SP2) but it does not work in SQL Server 2014. It raised error message while running.
Error: An error occurred while skipping data rows.
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PRIMEOUTPUTFAILED. The PrimeOutput method on MediaAgencyGroup returned error code 0xC0202091. The component returned a failure code when the pipeline engine called PrimeOutput(). The meaning of the failure
code is defined by the component, but the error is fatal and the pipeline stopped executing. There may be error messages posted before this with more information about the failure.
Any suggestion here?
Thanks,Yes
There's a difference in the way text qualifiers are parsed from 2012 onwards
see
http://www.proactivespeaks.com/2012/06/22/my-5-favorite-sql-2012-ssis-features-so-far/
http://blog.concentra.co.uk/2013/06/24/ssis-2012-flat-files-now-greatly-improved-but-are-they-good-enough-yet/
ANyways my preferred way to do this is as below
http://visakhm.blogspot.in/2014/06/ssis-tips-handling-embedded-text.html
Please Mark This As Answer if it solved your issue
Please Vote This As Helpful if it helps to solve your issue
Visakh
My Wiki User Page
My MSDN Page
My Personal Blog
My Facebook Page -
MS SQL Server 2014: Error inserting into Temp table with index and identity field
In this thread, I mentioned a problem with SQL Server 2014:
SQL Server 2014: Bug with IDENTITY INSERT ON
The question was answered, it is a bug. To keep you informed on this issue, I open this discussion.
Problem:
The code below works perfectly fine on MS SQL Server 2008 R2 and MS SQL Server 2012, but gives an error every second time the proc is executed on MS SQL Server 2014. If I do not define any index on the temp table, the problem disappears. Defining the index
after the insert, does not help.
SET NOCOUNT ON
GO
IF EXISTS (SELECT 1 FROM sys.procedures WHERE name = 'usp_Test') DROP PROC dbo.usp_Test;
GO
CREATE PROC dbo.usp_Test AS
BEGIN
SET NOCOUNT ON
CREATE TABLE #Source(ID integer NOT NULL);
INSERT INTO #Source VALUES (1), (2), (3);
CREATE TABLE #Dest (ID integer IDENTITY(1,1) NOT NULL);
CREATE INDEX #IDX_Dest ON #Dest (ID);
PRINT 'Check if the insert might cause an identity crisis';
SELECT 'Source' AS SourceTable, * FROM #Source;
SELECT 'Destination' AS DestTable, * FROM #Dest;
SET IDENTITY_INSERT #Dest ON;
PRINT 'Do the insert';
INSERT INTO #Dest (ID) SELECT ID FROM #Source;
PRINT 'Insert ready';
SET IDENTITY_INSERT #Dest OFF;
SELECT * FROM #Dest;
DROP TABLE #Source;
DROP TABLE #Dest;
END;
GO
PRINT 'First execution of the proc, everything OK';
EXEC dbo.usp_Test;
PRINT '';
PRINT 'Second execution of the proc, the insert fails.';
PRINT 'Removing the index #IDX_Dest causes the error to disappear.';
EXEC dbo.usp_Test;
GO
DROP PROC dbo.usp_Test;
GOThere is some progress. Communication from a former Microsoft employee tells us this:
Shivendra Vishal
Engineer at Microsoft
I am no longer with MS, and I do not have code access, however from the public symbols, I could make out following:
sqlmin!SetidentI2I4+0x1f3:
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] ds:00000000`00000000=????????????????
ExceptionAddress: 000007fef4d865d3 (sqlmin!SetidentI2I4+0x00000000000001f3)
ExceptionCode: c0000005 (Access violation)
ExceptionFlags: 00000000
NumberParameters: 2
Parameter[0]: 0000000000000000
Parameter[1]: 0000000000000000
Attempt to read from address 0000000000000000
This is a read AV and from registers it is clear that we were trying to move the value of location pointed by qword of register rax which is not valid:
rax=0000000000000000 rbx=0000000000000038 rcx=0000000000001030
rdx=0000000000000006 rsi=00000001f55def98 rdi=00000000106fd070
rip=000007fef4d865d3 rsp=00000000106fcf40 rbp=00000000106fcfe9
r8=0000000000000000 r9=00000001f55def60 r10=00000001f55defa0
r11=00000000106fcd20 r12=0000000000000000 r13=0000000000000002
r14=00000001f49c3860 r15=00000001f58c0040
iopl=0 nv up ei pl nz na po nc
cs=0033 ss=002b ds=002b es=002b fs=0053 gs=002b efl=00010206
The stack is:
# Child-SP RetAddr Call Site
00 00000000`106fcf40 000007fe`f30c1437 sqlmin!SetidentI2I4+0x1f3
01 00000000`106fd050 000007fe`f474e7ce sqlTsEs!CEsExec::GeneralEval4+0xe7
02 00000000`106fd120 000007fe`f470e6ef sqlmin!CQScanUpdateNew::GetRow+0x43d
03 00000000`106fd1d0 000007fe`f08ff517 sqlmin!CQueryScan::GetRow+0x81
04 00000000`106fd200 000007fe`f091cebe sqllang!CXStmtQuery::ErsqExecuteQuery+0x36d
05 00000000`106fd390 000007fe`f091ccb9 sqllang!CXStmtDML::XretDMLExecute+0x2ee
06 00000000`106fd480 000007fe`f08fa058 sqllang!CXStmtDML::XretExecute+0xad
07 00000000`106fd4b0 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
08 00000000`106fd5f0 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
09 00000000`106fd7e0 000007fe`f152cfaa sqllang!CSQLSource::Execute+0x86c
0a 00000000`106fd9b0 000007fe`f152c9e8 sqllang!CStmtExecProc::XretLocalExec+0x25a
0b 00000000`106fda30 000007fe`f152a1d8 sqllang!CStmtExecProc::XretExecExecute+0x4e8
0c 00000000`106fe1e0 000007fe`f08fa058 sqllang!CXStmtExecProc::XretExecute+0x38
0d 00000000`106fe220 000007fe`f08fb66b sqllang!CMsqlExecContext::ExecuteStmts<1,1>+0x427
0e 00000000`106fe360 000007fe`f08fac2e sqllang!CMsqlExecContext::FExecute+0xa33
0f 00000000`106fe550 000007fe`f0902267 sqllang!CSQLSource::Execute+0x86c
10 00000000`106fe720 000007fe`f0909087 sqllang!process_request+0xa57
11 00000000`106feee0 000007fe`f2bf49d0 sqllang!process_commands+0x4a3
12 00000000`106ff200 000007fe`f2bf47b4 sqldk!SOS_Task::Param::Execute+0x21e
13 00000000`106ff800 000007fe`f2bf45b6 sqldk!SOS_Scheduler::RunTask+0xa8
14 00000000`106ff870 000007fe`f2c136ff sqldk!SOS_Scheduler::ProcessTasks+0x279
15 00000000`106ff8f0 000007fe`f2c138f0 sqldk!SchedulerManager::WorkerEntryPoint+0x24c
16 00000000`106ff990 000007fe`f2c13246 sqldk!SystemThread::RunWorker+0x8f
17 00000000`106ff9c0 000007fe`f2c13558 sqldk!SystemThreadDispatcher::ProcessWorker+0x3ab
18 00000000`106ffa70 00000000`775d59ed sqldk!SchedulerManager::ThreadEntryPoint+0x226
19 00000000`106ffb10 00000000`7780c541 kernel32!BaseThreadInitThunk+0xd
1a 00000000`106ffb40 00000000`00000000 ntdll!RtlUserThreadStart+0x21
Unassembling the function:
000007fe`f4d8658e 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d86591 4533e4 xor r12d,r12d
000007fe`f4d86594 410fb7d5 movzx edx,r13w
000007fe`f4d86598 4533c9 xor r9d,r9d
000007fe`f4d8659b 4533c0 xor r8d,r8d
000007fe`f4d8659e 488bc8 mov rcx,rax
000007fe`f4d865a1 4489642420 mov dword ptr [rsp+20h],r12d
000007fe`f4d865a6 41ff5230 call qword ptr [r10+30h]
000007fe`f4d865aa 8b5597 mov edx,dword ptr [rbp-69h]
000007fe`f4d865ad 4c8b10 mov r10,qword ptr [rax]
000007fe`f4d865b0 4489642438 mov dword ptr [rsp+38h],r12d
000007fe`f4d865b5 4489642430 mov dword ptr [rsp+30h],r12d
000007fe`f4d865ba 458d442401 lea r8d,[r12+1]
000007fe`f4d865bf 4533c9 xor r9d,r9d
000007fe`f4d865c2 488bc8 mov rcx,rax
000007fe`f4d865c5 c644242801 mov byte ptr [rsp+28h],1
000007fe`f4d865ca 4488642420 mov byte ptr [rsp+20h],r12b
000007fe`f4d865cf 41ff5250 call qword ptr [r10+50h]
000007fe`f4d865d3 488b10 mov rdx,qword ptr [rax] <=================== AV happened over here
000007fe`f4d865d6 488bc8 mov rcx,rax
000007fe`f4d865d9 4c8bf0 mov r14,rax
000007fe`f4d865dc ff5268 call qword ptr [rdx+68h]
000007fe`f4d865df 488d55e7 lea rdx,[rbp-19h]
000007fe`f4d865e3 4c8b00 mov r8,qword ptr [rax]
000007fe`f4d865e6 488bc8 mov rcx,rax
000007fe`f4d865e9 41ff5010 call qword ptr [r8+10h]
000007fe`f4d865ed f6450a04 test byte ptr [rbp+0Ah],4
I remember few issues with scan2ident function, I am not sure if they have fixed it however it appears that this is intoduced to SQL 2014 and we need help from MS to get this resolved as it needs code analysis.
It is not getting simulated for other versions of SQL apart from SQL 2014.
Also to add, interestingly, the value of rax is not visibly changed and it was successfully passed on to rcx, which has a valid value, so something should have changed the value of rax inside call to function using call qword ptr [r10+50h], and looking at this
it appears that it might be a list of functions and we are going at particular offset [50h]. So, bottom line is that the call to function qword ptr [r10+50h], should be changing something in rax, and debugging/analyzing this code might give us some more idea.
Maybe you are looking for
-
I have two macs at my house, and multiple iPhones. I want to keep the same apple id as everyone else, but i want to put my own music only on my iPhone. I want to do this with my laptop which is not the family's main iTune's computer.
-
When I try to access my music library from AppleTV is keeps telling me to turn on ITunes Match. I am not supposed to need iTunes Match for Home Sharing. I tripled checked to ensure Home Sharing is turned on and it is. Can anyone offer a solution?
-
Overwrite material BOM component
Hi, I am trying to over-write the component of a material BOM with another component in the same position. I am using FM CSAP_MAT_BOM_MAINTAIN for this. I am passing values to the the below parameters. MATERIAL H.1013.2476
-
Hi, Can anybody please tell me the release date for ECC 6.0. Full points will be assigned. Thanks, JB
-
EclipseLink persistence provider issue with weblogic 10.3
Hi All, I have been trying to deploy and run an EAR in weblogic but when I run the application I get the following warning: WARNING: Found unrecognized persistence provider "org.eclipse.persistence.jpa.PersistenceProvider" in place of OpenJPA provide