Issue with re-sizing JTable Headers, JTabbedPane and JSplit pane

Ok, hopefully I'll explain this well enough.
In my Swing application I have a split pane, on the left hand side is a JTable and on the right hand is a JTabbedPane. In the tabs of the JTabbedPane there are other JTables.
In order to make the rows in the JTable on the left and the JTable(s) on the right line up, the Table Header of all the tables is set to the size of the tallest (deepest?) table header.
Hopefully so far I'm making sense. Now to get to the issue. One of the tables has a number of columns equal to the value on a NumberSpinner (it represents a number of weeks). When this value is changed the table is modified so that it contains the correct number of columns. As the table is re-drawn the table header goes back to its default size so I call my header-resize method to ensure it lines up.
The problem is this: if I change the number of weeks when selecting a tab other than the one containing my table then everything is fine, the table header is re-sized and everything lines up. If I change the number of weeks with the tab containing the table selected, the column headers stay at their standard size and nothing lines up.
To make things more complicated, I also put System.out.println's in as every method called in the process to obtain the size of the table header. And every println returned the same height, the height the table header should be.. So I'm really confused.
Could anyone shed any light on this?
Thanks.

Okay I managed to solve the problem by explicitly revalidating and repainting the table header.
Not sure why it wasnt doing it properly for that table when all the others where fine.
Oh well...

Similar Messages

  • Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Sync issues with playlists. Not syncing playlists, and now my playlist have disappeared from iTunes. I am Using iTunes 11.1.3 and iOS 7.0.4

    Hello surig84,
    Thank you for providing the details of the issue you are experiencing when syncing your iPad.  I recommend reviewing the following article specifically the section titled "Authorize using the correct account name."
    iTunes repeatedly prompts to authorize computer to play iTunes Store purchases
    http://support.apple.com/kb/ts1389
    Thank you for using Apple Support Communities.
    Best,
    Sheila M.

  • Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I am operating with CS4. Photoshop produces an error " Could not complete your request because photoshop does not recognize this type of file"

    Recently upgraded to a Canon Mark 3 and now having issues with my RAW files in Bridge and Photoshop. I have operating with CS4. Photoshop produces and error " Could not complete your request because photoshop does not recognize this type of file"

    Assuming you mean 5D Mark III, Photoshop CS4 cannot directly open raw files from your camera.
    Generally speaking, Adobe stopped updating older versions to be able to read raw files from newer cameras when they released a new major version of Photoshop. Photoshop CS4 is no longer receiving Camera Raw updates.
    You can double check this yourself:
    First you need to determine whether Adobe has released support for your new camera in your version of Photoshop. To do that, look at these two pages. You'll want to find out the earliest version of Camera Raw that can support your camera, then what version of Photoshop can run that version of Camera Raw.
    Camera Raw plug-in | Supported cameras
    Camera Raw-compatible Adobe applications
    If you find your camera is supported by your version of Photoshop, you need to download the latest update for Camera Raw. There's more information on how to do that here:
    Keeping Photoshop Up-To-Date
    If your version of Photoshop cannot support your camera, you can download and install the latest version of the free Adobe DNG Converter, which can take your raw files as input and put out DNG format files, which your version of Photoshop can open.
    Photoshop Help | Digital Negative (DNG)
    The DNG converter DOES work, but if you want maximal quality from your raw files (not to mention the convenience and ease of use of directly opening your raw files) you'll want the latest version of Photoshop. Adobe has made substantial improvements in raw conversion quality in recent years.
    -Noel

  • I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    I tried playing a you tube video, but received a message prompt to download the latest version of Adobe Flash Player. The link to Adobe stated that there are issues with MAC OS X 10.7 and Flash Player 10.3. The new version did not download. Any Suggestion

    Hi Seattle
    From Adobe site only!
    flashplayer11_b1_install_mac_071311.dmg
    Works fine.
    Cheers Tomi

  • URL issue with Windows 7 Internet Explorer 11 and SAP NW PI 7.

    Hello SAP community,
    I am facing a strange issue with Windows 7 - Internet Explorer 11 and SAP NW java services (I hope I am in the correct discussion) ...
    When I try to open URL http://sapserver.hosters-name:port it is working so far with Windows 7 and Internet Explorer 11.
    But when I click than on NWA (example), I am getting "http 500 server error".
    I don't have the issue, when I start-up a VMware Workstation with Windows XP and Internet Explorer 8.
    But now the strange part: In our network DNS (Domain Name Service), we can also open the URL by http://sapserver.our-dns:port.
    Than it is working without problems with Windows 7 and Internet Explorer.
    I would agree to state the comment - it is just a Windows 7/Internet Explorer 11 issue, if it wouldn't work for both URLs (http://sapserver.hosters-name:port = problem URL; http://sapserver.our-dsn:port = working).
    We are using a SAP NW PI 7.x system. Some URLs for PI are using http://sapserver.hosters-name:port/java service.
    Do you have any hints what is cause the issue - I suspect some with Internet Explorer and Firefox (because with Google Chrome at least the URL for NWA is opened, beside the issue, Google Chrome can't display NWA content)?
    Thanks for your help.
    Best regards
    Carlos

    Hi all,
    I think I found the solution.
    The reason seems to be, the domain name for http://sapserver.our-dns:port, "our-dns" was already added to the compatibility view settings of Microsoft Internet Explorer.
    That seemed to be the reason, why it was working with http://sapserver.our-dns:port.
    When I now added for http://sapserver.hosters-name:port the domain "hosters-name" to the compatibility view settings it is now working.
    Internet Explorer Options => Settings for compatibility view => Add domain
    Best regards
    Carlos

  • Solution: iPad/iPhone Login issues with IIS as Reverse Proxy (Android and Windows Phone works)

    Hi,
    I had issues with iPad/iPhone access from external and tried a lot. Now I found my solution I like to share.
    I setup a IIS on Windows Server 2012 with ARR 2.5 and Android and Windows Phone could login but not iPad and iPhone.
    The IIS Log on the reverse proxy showed:
    2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0&X-ARR-LOG-ID=1996c8d7-09d0-4310-8da4-a8dfb7940e28 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 401 0 0 124
    2013-02-26 12:03:31 <IP> POST /webticket/webticketservice.svc X-ARR-CACHE-HIT=0 443 - <ClientIP> Lync%202010/1.6+CFNetwork/609+Darwin/13.0.0 - 502 3 12018 93
    First Request gets a 401 while anonymous. Second try would be with authentication but it never reached the internal front end server.
    After I installed a fix for ARR
    http://forums.iis.net/t/1195560.aspx/1?ARR+502+3+Bad+Gateway+0x80072ef2+2147954418+The+supplied+handle+is+the+wrong+type+for+the+requested+operation the Apple Devices could login.

    Hi,
    This resolved our problem too!! So happy after 2 weeks of messing around with just about every setting recommended from all types of forums and rebuilding our reverse proxy I was at a loose end. 
    Our environment is Lync 2013 Enterprise, Lync 2013 Edge, IIS as Reverse Proxy on Server 2012 using ARR 2.5
    We had Android and Windows clients working but no iOS devices at all. In the iOS log we were seeing 
    <h1>Server Error</h1></div><div id="content"> <div class="content-container"><fieldset> <h2>502 - Web server received an invalid response while acting as a gateway or proxy server.</h2> <h3>There is a problem with the page you are looking for, and it cannot be displayed. When the Web server (while acting as a gateway or proxy) contacted the upstream content server, it received an invalid response from the content server.</h3> </fieldset></div></div></body></html>
    When the client was trying to retrieve from the webticketservice.svc
    2013-04-11 17:19:44.659 Lync[4970:6c61000] INFO TRANSPORT TransportUtilityFunctions.cpp/907:<ReceivedResponse>
    POST https://lyncwebext.contoso.com/webticket/webticketservice.svc
    Request Id: 0x72cfc18
    HttpHeader:Content-Length 1477
    HttpHeader:Content-Type text/html
    HttpHeader:Date Thu, 11 Apr 2013 16:22:25 GMT
    HttpHeader:Server Microsoft-IIS/8.0
    HttpHeader:StatusCode 502
    Installed the HotFix from here:-
    Hotfix for Microsoft Application Request Routing Version 2.5 for IIS7 (KB 2732764) (x64)
    Rebooted the Reverse Proxy and iOS clients worked straight away for both Lync 2010 and Lync 2013 on both iPhone 5 and iPad both. 
    I hope this helps others as I was losing the plot :-)
    Cheers
    Sam

  • We have been having some issues with Email notifications not going out and getting hung up in SOST.  Can anyone please tell me whether we can use Solution Manager to monitor outbound emails?

    We have been having some issues with Email Notifications not going out and getting hung up in SOST. Can anyone please tell me whether we can use SAP Solution Manager to monitor outbound email?

    What version of Solman are you using ?  Check in t-code Rz20 >ccms monitor template of satelliate system , there would be option to monitor your outbound mails .You can sutomise your monitorig metrics in solman 7.1  else in 7.01 you use auto reaction methods to monitor .
    Regards
    Jay

  • Send Issues with Outlook for Mac (2011 / V15) and Exchange 2013 SP1

    Hi all,
    we have a strange issue with only with Outlook for Mac Users (version 2011 and the newest Outlook Version (V15) from Office 365) connected to our Exchange Server 2013 SP1. Some emails which we send out to the exactly same recipient are not sent through our
    Exchange Server. 
    We have sent 8 emails with subject "test1, test2, test3...". Only test 3-6 was arriving to the recipient. The other emails are in the "sent" folder but it was not sent out through the Exchange.
    What we can see with "Get-MessageTrackingLog" is, that the Recipients and MessageSubject are empty for these emails:
    Timestamp Sender Recipients MessageSubject
    25.02.2015 16:48:52 [email protected].. {}
    25.02.2015 17:04:43 [email protected].. {}
    25.02.2015 17:08:25 [email protected].. {[email protected]} test 3
    25.02.2015 17:08:56 [email protected].. {[email protected]} test 4
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 5
    25.02.2015 17:09:38 [email protected].. {[email protected]} test 6
    25.02.2015 17:13:45 [email protected].. {}
    25.02.2015 17:13:55 [email protected].. {}
    We can still reproduce the issue on different Mac computers.
    Thanks for any help in advance!
    Thanks and best regards
    Reto

    Here is the mailheader form the successfully sent email:
    Date: Wed, 25 Feb 2015 17:08:25 +0100
    Subject: test 3
    From: sender <[email protected]>
    To: "'[email protected]'" <[email protected]>
    This mailheader is from an email which was not sent out:
    User-Agent: Microsoft-MacOutlook/15.6.0.150113
    Date: Wed, 25 Feb 2015 16:48:52 +0100
    Subject: test 1
    From: sender <[email protected]>
    To: [email protected] <[email protected]>
    Interesting: Only the not received messages contains User-Agent string and have some quotation marks missing in the To field.

  • Issues with Home Hub 3 Wireless. And lousy teleph...

    I don't know if this forum is moderated or followed by BT support staff, but I sure hope so.
    After coming from Virgn Media for my BB to BT infinity (Awesome speeds btw!) I'm pleased with the connection and, up until today, the support. I now have issues with my Wireless devices on the HH3.
    This is the outline of my setup:
    I have the Open reach modem connected to the home hub.  I then have the 1Gbps ethernet port from the home hub that is connected to a 1Gbps 5 Port switch that connects my wired network together (Consisting of my Xbox, Networked Printer and my Desktop PC).  Wireless serves 2 Laptops, an Xperia U phone, and a G5 Ipod touch (not all mine, I have a flat mate).
    My issue is that when more than one device connects via WiFi, the WiFi network has serious issues: The connections don't drop per se, but websites are not delivered, data transfer is intermittant at best - i.e. the WiFi network simply does not work.  When there is only one device, there is no issue.
    Now, being a techie (I don't mean to title drop, but I think it's important that technical support know that I know my stuff) I'm an electrical engineer (The graduate type) and I know my IT - so I have my own idea of what's wrong with this.
    Now, as my order was not completed until yesterday, techincal support couldn't/wouldn't help until today.  Yesterday, however, I spent hours trying to solve my issues and got as far semi-solving the problem.  I managed to get everything working nicely together when Wireless N is disabled and only a/b/g is enabled.  Great, but a main selling point is the Wireless N and I want to use this.
    So, today I phoned technical support.  I should also note here, and I made this perfectly clear with support, that when the WiFi starts to missbehave, the wired network still works perfectly and I have no issues with internet connectivity with any wired devices.  So, clearly this is not a line fault - it's on this side, aka, the router WiFi side where the problem resides.  Support decided to do a line test anyway - and of course it got the all clear.  He then asked me to reset the router (Yey, again after I had done it plenty of times before, only this time I had customised the SSID and the LAN IP addresses and now they need done again).  He then went on to state that I should receive an e-mail with instructions on what to do next, and if they are still issues to reply to a text message that will be sent.
    Duly, an email arrived.  It began with "Sorry you had to call us today about your wireless disconnecting. We’re pleased we could help you get it working again." and continued on with with this theme.  No, my problem is not resolved!  I phoned back, this time advising me to change channels, and check individual devices to see if they're any conflicts - I did this pretty quickly and disabled and re-enabled WiFi on my Laptop, phone, ipod and still to no avail.
    I have now been told that I will get a phone call between 3 and 3:30pm to see if the WiFi will settle down. huh!
    I don't mean to be such a pain and sound like such a git, but this is not an issue that I believe the technical support (via the call centre anyway) will be able to solve.  This is an issue with the HH3, mine at least, not being able to handle mutiple WiFi devices conntected simualtaneously - all but one on N, the other on G.  Now, I'm of the understanding that this shouldn't be a problem.  I'm sick of telephone support going through their script without listening to the whole issue either or beleiving that I spent a good 2 hours yesterday getting to the bottom of this.  I don't need line tests, I don't need resetting the router, I don't need changing channels - I've did all this!
    So it looks as though I'm stuck on HH3 in 'G' for now until we solve this issue.
    Further information: I'm using the type A HH3; again wired devices are not impacted in any way from this issue; I have tried multiple different channels; YES! I've reset the router and power cycled it; And this issue happens wether my WiFi devices are 1 meter away from the HH3 or 15 meters away.
    Could this be a bad HH3 or frimware issue? Can someone suggest something or highlight something that I've perhaps overlooked or missed?

    This is only a customer to custome help forum.
    This link may help, although some of the things you may have already tried.
    Wireless can prove quite unreliable, and an separate wireless access point can help.
    Wireless connection problems
    There are some useful help pages here, for BT Broadband customers only, on my personal website.
    BT Broadband customers - help with broadband, WiFi, networking, e-mail and phones.

  • Resolution issue with macbook pro 13 (late 2013) and dell u2711

    I have a Dell U2711 (native resolution 2560x1440) that I use without issue with a macbook pro late 2007 (running 10.10.x), various iMacs and Macbook air 2011 running 10.10. When I say without issue, the display works at its native resolution.
    Last week we got a MacBook Pro 13in, late 2013 model.
    If I connect this macbook via either thunderbolt connection to the u2711 using either DVI port on the dell, the maximum resolution that I can use is 1920x1080. I am using apple mini displayport to DVI adaptors (I have tried 2 different ones and 2 different DVI cables, with no improvement). Clicking option + scaled in sys prefs does not give the native resolution as an option.
    However, I just discovered that if I use a DVI to HDMI adaptor and I connect the macbook to the display I get the full native resolution without issue (2560x1440).
    I have zapped the pram, powered down the display etc etc etc and it made no difference.
    I would prefer to use the mini DIsplayPort to DVI adaptor rather than HDMI, any suggestions appreciated.
    TIA.

      Reset PRAM.   http://support.apple.com/kb/PH18761
    Reset SMC.     http://support.apple.com/kb/HT3964
    Choose the method for:
    "Resetting SMC on portables with a battery you should not remove on your own".
      Start up in Safe Mode.  http://support.apple.com/en-us/HT1564
    Best.

  • Issue with HP 3600n, NetGear Wireless Router and SUBNETS!!

    Hello All,
    I want to say (admit) first off that I am a PC person. The school I work for has recently acquired some new iMacs and I have to say I am very impressed with the design, ease of use and reliability. I can't believe I am saying these things out loud! Here, however, is my dilemma and I am hoping a community with a little more experience than me can help out. I searched through these discussions already and found some useful info, but nothing to really nail it on the head. My situation may be unique, but I am not sure. Here goes:
    The school building we occupy is very old. Each classroom has only ONE data drop in it. Each classroom has a few PCs and a few Macs (mostly the newer iMacs). In one classroom in particular, I am unable to print wireless-ly to a networked HP LaserJet 3600n I have setup elsewhere on the network. Here is the network breakdown:
    Main network (FIOS modem to SonicPro 2040 Firewall)= 192.168.168.xx. The HP Printer has an IP address on this scope. The classrooms have a NetGear WGR16 setup to act as a switch and wireless access point. The WGR16 also distributes IPs on it's own subnet, 192.168.1.xx. The iMac connects wireless-ly to this NetGear and receives an IP of 192.168.1.xx.
    The PCs in the classrooms connect directly to the NetGear Router via an Ethernet cable. The PCs can see the printer, the firewall and get out to the internet with no problems. They can print with no issues. The iMac, however, can get out to the internet but cannot see the HP printer on the other scope. I know how to add a printer in Windows directly via an IP address, but trying that with the Mac doesn't get me anywhere, probably because I am not doing something correctly. I can get the Mac to print to the HP printer's IP directly but it just sends garbled text to the printer and then shoots out 100 blank pages (lol).
    The Mac, HOWEVER, can print with no problem wireless-ly to another networked printer I have elsewhere on another scope (it's a Lexmark C532n).
    I am thinking the issue has more to do with the HP printer than anything else but my questions are:
    1. What is the best way to have Macs recognize printers that are on different subnets if the built in features of Mac OSX aren't "seeing" the printer?
    2. Are there any specific issues with the NetGear Router or HP Printer that I should know about and address to solve this issue?
    3. We are a school on a limited budget so purchasing any additional hardware is not likely.
    I appreciate anyone who has read this entire rambling discussion and certainly appreciate any help in moving things in the right direction. Please let me know if I need to clarify anything I have said here.
    Thanks much!!

    I just had the same problem with my MacBook Pro using 10.5.5 After trying a number of things, the following worked. (not sure what specifically ... just did this combination)
    1. Had the Apple store Genius Bar folks install the latest HP drivers.
    2. Restart computer
    3. Restart the HP Color LaserJet 3600
    4. Connected the HP printer and MacBook Pro directly into a switch, so the wireless was not an issue (both machines had IP addresses set and computer's was set to DHCP with manual IP).
    5. Instead of using the System Preference printing and fax tool, I started Text Edit, typed something and said "print".
    Print window came up and said "no printer selected"
    6. I clicked on the drop down so it would look for printers.
    7. It found the HP Color LaserJet 3600.
    8. I clicked on the name of the printer and the computer went out and found the driver
    9. I clicked on "Add" and it added the printer.
    10. I tried a couple of test prints in different programs.
    11. I disconnected the hard wired ethernet cables and set the computer to be on the wireless.
    12. I printed a few more test prints in various programs.
    I had previously tried selecting the printer and drivers through the System Preferences to no avail, but doing it this way worked.
    Blessings

  • Issues with Mac os 10.6.8 and photoshop 5

    I recently received a new Imac running 10.8.6 and when I attach a digital camera the images go directly to iphoto and yet I don't see any trace of the camera on my desktop or in my finder and therefore can't import them onto my hard drive as customary.  Can you tell me if this is an issue with photoshop 5 that will be transparent if I upgrade to photoshop 6?  or is there a download that will address this issue is PS5?
    Thanks  Jeff

    they are on your harddrive already:  http://osxdaily.com/2011/08/30/where-iphoto-pictures-are-located/

  • Issue with update to 10.6.5 and WIFI connection

    I have been having an ongoing issue with my MBP over the last 6 months and even more consistently within the last several weeks.
    I have searched the other posts and I think that I might be making a connection here. So, please chime in if you have anything to add to solving or addressing my problem as I think that there are others out there suffering.
    Issue in short: Waking my MBP from sleep mode or turning it on loses my connection to my WIFI that is password protected.
    Mainly when I wake my MBP from sleep mode this occurs a lot.
    I have contacted AppleCare many times and have taken my computer to the Genius guys and I have done the following:::
    Genius guys tested the computer and could not replicate. No hardware issues found, must be a software issue.
    AppleCare, done many things to reset the computer, re-installed Snow Leopard, deleted Caches and other things.
    Now, I am wondering if there is something actually due to the OS updates after 10.6.2 or 10.6.3 that is causing my issue that much more.
    I can see my wireless router as available to join, I select it, type in my password, and it states invalid password. Try to restart, reboot, and nothing. It almost appears that it loses the sync between my keychain and such.
    As of late, as I stated, the problem is more persistent now.
    What do you think? An issue with the latest updates of 10.6.5?

    I too often have a devil of a time connecting to a Linksys WiFi router with a brand-new unibody MacBook Pro 15", 2.66GHz. I noticed that if I boot the machine off an external Firewire drive this seems to be more of an issue than if I boot off the internal drive.
    I beginning to thing there's some kind of interference between the Firewire system and the WiFi system.
    The router is a Linksys with the latest firmware update. My MacBook and iPhone 3G, iPhone 4 connect to the router fine.

  • Major issues with a add-on Emoji Cheatsheet and missing add-ons in Firefox 37.0.2 ?

    As soon as Firefox updated me to 37.0.2 installed I started having issues with missing add-ons and missing tool bar buttons.
    Instead spending all day reloading add-on from "Refreshing" Firefox I just started going through my add-ons and disabling them and restarting (4-5 at a time) till thinks went right. I spent a hour last night till I got down t last few that could because it . I left FIREBUG disable and things started working as is and Compatibility Reporter started working too.
    Well I woke up to start Firefox and to my shagrin it was messed up again. So I went back through and and remembered the few last add-ons I re-enabled right before I disabled Firbug. So I disable it and sure enough things went back to normal.
    What Add-on was that?
    '''Emoji Cheatsheet :: Add-ons for Firefox'''
    [https://addons.mozilla.org/en-US/firefox/addon/emoji-cheatsheet/?src=ss]
    When the icon for it shows on my toolbar everything else shows, yet when it goes awal many other things malfunction. I tried reloading Firfox several times and nothing change. So when I disable it and restarted things were normal and working.
    Anyone else experience this?

    Sorry, the post about clearing your cache was meant for a different question.
    I suggest opening a ticket on the issue forums for this plugin: https://github.com/johannhof/emoji-helper/issues
    P.s. If it helps, I currently have 16 add-ons installed.

  • Duplication Issues with Photo Sync via iTunes/iPhoto and Photo Stream/iCloud (Detailed Scenario Given)

    Hi Everyone,
    I'd like to share an issue I am having with photo syncing between my iDevices.
    Here is how I USED to sync my Photos between my iDevices (no issues with photo duplication)
    Note: In this scenario, I use iTunes and iPhoto on my Mac. iCloud and Photo stream have NOT been activated in this case.
    1. Take photos via iPhone that saves in Camera Roll
    2. After a month or so, I will connect my iPhone to my Mac.
    3. Import my Photos in iPhoto and arrange  Events and Photos in monthly sections and add some of them in a separate Albums (ex. Written Notes Photos) for easy access.
    4. Once the import is done, iPhoto prompts an option to delete photos in my Camera Roll which I do as I like to start a fresh month with empty Camera Roll in my iPhone.
    5. In order to access the Photos I have imported in iPhoto in my iPhone, I go to iTunes and sync all my photos to my iPhone. This syncs my events, photos, faces, albums as they have been arranged in iPhoto in my Mac. (I cant delete them in my iPhone once they are synced. I have to delete in my iPhoto and sync again to have similar setup in my iPhone which isn't a problem).
    NOW I decided I don't want to manually go through all this process and went on to enable the Photo Stream ON in my iPhone and iPhoto with iCloud.
    THIS IS WHERE THE PROBLEM ENSUES.
    1. I  Take photos with my iPhone that saves in Camera Roll
    2. This automatically syncs with my Mac due to Photo Stream which a really convenient.
    3. It syncs automatically to Photo Stream, Events, Photos, Faces section in the iPhoto and I put put some of them (notes) in a separate album.
    THE PROBLEM:
    The Photos does not show up in the Album, Events and Photos Folder in my iPhone. They are only shown in Camera Roll. So I thought to sync using iTunes so the new Photos will be arranged in their appropriate folder like it used to with my prior process of syncing. This worked, HOWEVER the photos in my iPhone started showing DUPLICATES! Apparently, one comes from Photo Stream (which, if I delete on my phone also deletes in all my iDevices) and the other duplicate is from the iTunes sync (this sets up my photos as arranged in iPhoto which is what i WANT to happen as Photo Stream does not sync them accordingly).
    SOLUTION I AM IN SEARCH FOR:
    I want to be able to take photos with my iPhone that automatically syncs in iCloud AND iPHOTO AS ARRANGED IN MY MAC (Albums, Events etc) WITHOUT PROBLEM OF PHOTO DUPLICATES.

    Other folks have resolved similar issues by trashing  the iPod Photo Cache.
    Regards
    TD

Maybe you are looking for