Issue with the Access Sequence related to Pricing

Hi Gurus,
I have one issue related to Pricing. I have an access sequence ZPCD which has Table "A558" assigned to it.
Table A558 has fields
5 Sales Org
10 Distribution channel
20 Division
25 Customer.
But the issue is here.....in the access sequence ZPCD the field "20 Division" got deleted some how.
but i checked the table A558, it has "Division" in it.
So, summary is Table A558 has field Division, but the access sequence ZPCD is missing field Division in Access table A558.
Table 518 contains 585 condition record entries entries in Production system.
So question is how will i add Division back to the Access sequence Table A558.
Waiting for your expert advise and comments
Thank you

Dear Anitha
If I am correct, in access sequence, at field level, there is no deletion option available and hence, I am surprised how this could be possible.
Anyway, you can try in development server as follows:-
Go to V/07, select ZPCD, block the table 558 and delete. Save the data. Now try to reassign the same table and see how it works.
thanks
G. Lakshmipathi

Similar Messages

Changing the Sequence of the Access Sequence for Pricing Condition Type

Hi Friends,
We have an access sequence to determine the pricing. We have 8 key combinations for the same.
Customer/Plant/Material/Batch
Sales Org/ Dist Ch/ Cust Region/Plant/Material/ Batch
Price List Type/Currency/Plant/Material/ batch
Plant/Material/ Batch
1st 4 is with batch. and 2nd 4 is without batch. At the time of implementation ie., before 8 years the 1st 4 key combinations were used. But now based on the business need we are not using the 1st 4 key combination rather we are using the 2nd 4 which is without batch.
My question is that can we change the access sequence so that while the system fetches the price it need not go through the entire ( 91,02,401 ) records.
If this is possible then
Will there by any impact during viewing of past data?

Hi,
There are two options.
1)Change the validity dates for those condition records to earlier date.
2)Usually the sytem checks from top to bottom.If it finds the record in first table then it will return that value and stop searching.
As your not required things are on the top,remove the condition records for them using VK12 T.Code.And maintain the records for what condition tables you are required.
Regards,
Krishna.

163; There seems to be an issue with the template that the site is using as there is a code to replace the pricing.

163;
There seems to be an issue with the template that the site is using as there is a code to replace the pricing.
<script>
// Script to extract the currency and decimals from the price
var price = "{tag_saleprice}";
var priceWithoutCurrency = price.replace( /^\D+/g, '')
var decimals = priceWithoutCurrency.substring(priceWithoutCurrency.length - 2, priceWithoutCurrency.length);
var roundedPrice = priceWithoutCurrency.substring(0, priceWithoutCurrency.length - 3);
$('.image-with-price.big span').html(roundedPrice+''+decimals+'');

Here are the screenshots for what it's worth.
Not sure why I can't post them in the original post. 
Mod edit: See [https://bugzilla.mozilla.org/show_bug.cgi?id=718813 bug 718813]
'''Again, when I set my DNS server to automatically detect the servers both problems disappear and I have no issues at all.'''
IMO opendns is either doing this on purpose (unlikely) or they're under some sort of attack/being used to attack the specific torrent sites although I'm open to other explanations. I believe using the automatic setting for DNS is using my own ISP's DNS servers (which again, work fine... but still...)
I'd rather not use Google's public DNS servers as Google is to commercial these days and I think there's potential privacy issues.
'''Again I have changed the setting for DNS servers back and forth several times to duplicate/verify the issue(s)... and the issues only happen with the opendns servers.'''

I can't read Or write I have been using the iPad With the accessibility icon Is there a video help them teach me how to use it more efficiently

I cannot read or write I have been using the iPad With the accessibility icon Is there a video to help teach me To learn how to use this accessibility more efficiently

It sounds like you may have multiple problems, but none of them are likely to be caused by malware.
First, the internet-related issues may be related to adware or a network compromise. I tend to lean more towards the latter, based on your description of the problem. See:
http://www.adwaremedic.com/kb/baddns.php
http://www.adwaremedic.com/kb/hackedrouter.php
If investigation shows that this is not a network-specific issue, then it's probably adware. See my Adware Removal Guide for help finding and removing it. Note that you mention AdBlock as if it should have prevented this, but it's important to understand that ad blockers do not protect you against adware in any way. Neither would any kind of anti-virus software, which often doesn't detect adware.
As for the other issues, it sounds like you've got some serious corruption. I would be inclined to say it sounds like a failing drive, except it sounds like you just got it replaced. How did you get all your files back after the new drive was installed?
(Fair disclosure: I may receive compensation from links to my sites, TheSafeMac.com and AdwareMedic.com, in the form of buttons allowing for donations. Donations are not required to use my site or software.)

How to maintain code of 'requirement' of access sequences in SD pricing???

Hi everyone,
I have an assignment to maintain the code of 'requirement' of access sequence in SD pricing procedure...
and I know that the 'requirements' are pieces of code attached to an access sequence to determine whether or not a certain
access level should be executed.
And we can display the codes of SAP predefined 'requirements' with the TCODE VOFM,
but when i try to enter new requirement number , it just terminated with a ERROR msg: u r not allow to maintain SAP standard requirement...blabla... So i am confused how to do this
please help me, thanks...
Richard

Hello,
This is due to requirement numbering...
1 - 899 numbering reserve for SAP standard to be used...
900 -> onwards are for customer specific enhancement
Please try to use this...
Thanks.

Issue with order or sequence of wbs elements appearance in planning layout

Hi Experts
we have an issue with order or sequence of wbs elements appearance in BPS planning layout.
In BW - 0wbs element - hierarchy order is as below
1
2
3
4
5
6
7
8
but when we check the same wbs element in BPS planning layout, it appears as below
1
2
3
4
6
7
5
8
Request you to advice how to correct the order.
Best Regards
krishna

Hi,
I came across a similar situation once. I dont remember exactly.
We have two different DataSources on wbs hierarchy. The hiearchy was loaded using the two datasources.
By mistake we were trying to use the hierarchy created by Datasource2, instead of hier created by datasource1.
Can you check that.

Has anyone had issues with the charger mine says i need to use the original charger and it is the original charger

my charger stopped charging says I need to use the original charger which I am Verizon says Samsung is aware of this and is working on it

Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
This resolved my issue with the new update on Vista.
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)

Has anyone had issues with the latest i-tunes update 11.1.4 on Windows Vista

I downloaded the update on 24th Jan, and when I tried to open i-tunes after that it failed to start and the message was MSVCR80.dll and the window suggested that I remove and re-install i-tunes.
I did this and then my CD/DVD drive was not recognised. I then decided to go for a system restore prior to the update. When I did this i-tunes worked again but a window opens every 30seconds saying 'Mobile device helper is not working' At one point I had 116 windows open. Has anyone else had this problem or can offer any advice please? I have an i-pod classic and my system is windows vista which is approx 8yrs old. I have never had any problem with i-tunes updates before.

Try using these directions on this link: http://support.apple.com/kb/HT1926 or http://support.apple.com/kb/HT1923
This resolved my issue with the new update on Vista.
Use the Control Panel to uninstall iTunes and related software components in the following order and then restart your computer:
iTunes
Apple Software Update
Apple Mobile Device Support
Bonjour
Apple Application Support (iTunes 9 or later)

Issue with assistive access not keeping permissions

Since a recent upgrade (likely from OS X 10.9.x to 10.10.2) I've had issues with Assistive Access blocking Automator and Applescript from interaction with dialogs.
If I run my script or my Automator workflow (which basically has the same script in it) I get the error:
System Events got an error: Automator is not allowed assistive access. (in the case of Automator).
If I open Automator, and then untick and retick the Automator entry in the Accessibility options within Security & Privacy (System Preferences), then workflow can run again. It continues to work until I Quit Automator. Then it's as if OS X no longer trusts Automator to be the same app I gave Accessibility permissions to. And the situation repeats. It's much as if it were not code-signed. The exact same issue plays out with Apple Script.
I came across this info, which I hoped would solve the problem, but it made no difference: http://macscripter.net/viewtopic.php?id=43394 and http://bit.ly/1x3SRmc
In my Accessibility permissions I now have:
Script Editor
Automator
1Password 5 (which the script interacts with)
com.apple.security.agentStub.xpc (in case that's being called up and triggering the Accessibility issue)
osascript (in case that's handling the script and triggering the Accessibility issue)
SecurityAgent.xpc (in case that was triggering the Accessibility issue)
I added all these because the post at http://bit.ly/1x3SRmc indicated that anything Apple Script is interacting with needs Accessibility access permissions.
My script is as follows:
set appName to "SecurityAgent"
set passApp to "1Password 5" (* set this to the name of your password manager *)
tell application "System Events"
if not (exists window 1 of process appName) then -- test if SecurityAgent window exists
set answer to display dialog "The password dialog was not found. Please check." buttons {"Ok"}
return -- abort if SecurityAgent window does not exist
end if
end tell
tell application "System Events"
set position of window 1 of process appName to {10, 10}
-- move SecurityAgent window out of the way
end tell
activate application passApp
tell application "System Events"
tell application "SystemUIServer"
set answer to display dialog "Make sure correct 1Password item is actively selected (i.e. click it again if it was previously selected), then click “Continue” to proceed." buttons {"Continue"}
end tell
tell process passApp
(* If you are not using 1Password, you may need to change the menu item clicks, below, to whatever is correct in your particular password manager *)
click menu item "copy password" of menu "item" of menu bar 1
delay 1
set appData to the clipboard
end tell
tell application "System Events"
tell process appName
set value of text field 1 of window 1 to appData
if exists (text field 2 of window 1) then
set value of text field 2 of window 1 to appData
if exists checkbox 1 of window 1 then
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
end if
set value of checkbox 1 of window 1 to 0
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
else
if value of checkbox 1 of window 1 is 1 then
click checkbox 1 of window 1
end if
delay 1 (* gives a moment to see what's going on *)
click button "OK" of window 1
end if
end tell
end tell
end tell
In Automator it would appear the script is generating an error as soon as it reaches line 5, "if not (exists window 1 of process appName) then"
I would greatly appreciate some assistance in resolving this issue.

Starting with Mavericks, Apple changed the way that the accessibility works (see Using AppleScript with Accessibility and Security features in Mavericks) - each individual application needs to be given access, instead of a global option. A regular AppleScript application saves properties and global variables with the script, which makes it a new application as far as the system security is concerned, so it needs to be re-added to the accessibility list. To work with this new security feature, you need to code-sign your AppleScript application or make the script(s) in the bundle read-only so that they don't get changed (note that an AppleScript-based project in Xcode does not modify the application bundle by saving properties and globals).

Performance issue with the ABAP statements

Hello,
Please can some help me with the below statements where I am getting performance problem.
SELECT * FROM /BIC/ASALHDR0100 into Table CHDATE.
SORT CHDATE by DOC_NUMBER.
SORT SOURCE_PACKAGE by DOC_NUMBER.
LOOP AT CHDATE INTO WA_CHDATE.
   READ TABLE SOURCE_PACKAGE INTO WA_CIDATE WITH KEY DOC_NUMBER =
   WA_CHDATE-DOC_NUMBER BINARY SEARCH.
   MOVE WA_CHDATE-CREATEDON to WA_CIDATE-CREATEDON.
APPEND WA_CIDATE to CIDATE.
ENDLOOP.
I wrote an above code for the follwing requirement.
1. I have 2 tables from where i am getting the data
2.I have common fields in both the table names CREATEDON date. In both the tables I hve the values.
3. While accessing the 2 table and copying to thrid table i have to modify the field.
I am getting performance issues with the above statements.
Than
Edited by: Rob Burbank on Jul 29, 2010 10:06 AM

Hello,
try a select like the following one instead of you code.
SELECT field field2 ...
INTO TABLE it_table
FROM table1 AS T1 INNER JOIN table2 AS T2
ON t1-doc_number = t2-doc_number

HT1918 How do you solve an issue with the card? I don't get the option of 'none' :(

How do you solve an issue with the card? I don't get the option of 'none'

I had this exact same problem with the new iPhone I bought on 1/4/13. The walk through they provide on how to do this is useless because it fails to explain that if you are already having the problem of not getting the "None" payment option with an Apple ID then you will need to create a completely new Apple ID.
I had to do this 7 times since I bought my iPhone on Friday until this morning to figure out how to finally be able to use the Home Sharing option in iTunes to put my music collection on my brand new $500.00 iPhone. Pretty pathetic if you ask me but since it made me so angry I want to make sure other know how to do this so you don't get as upset as I did.
#1 If your current or soon to be "old" Apple ID is not providing the option for "None" as a payment option then you need to make a brand new one. But you have to make it specifically how I tell you.
#2 You will need to use an email address that has not already been used for anything related to a previous Apple ID. You might need to make a brand new email address.
#3 Open iTunes, then open iTunes Store (upper right corner of iTunes).
#4 Click on App Store (upper center of screen).
#5 Scroll down the screen page until you see Top Free Apps on the right side.
#6 Choose any one of the FREE apps.
#7 You should either get the option to create a new Apple ID box, either that, or it will pop up with some kind of disclaimer and then it does the create new Apple ID.
Either way just create a new Apple ID when it gives you the option to and then when you get to the page that looks like the payment page the "None" payment option will finally be available.
Note: You will still have to fill out the information on the payment page. As long as you choose the "None" option it will not request any credit card information.
#8 You will be sent a confirmation email to the new email account. Just follow through with what ever it tells you and viola now you can use your Apple Device.
What a pain in the keester, eh?

Exchange SP2 to SP3 RU7 upgrade and any know issues with the Dialogic Gateways

We are planning on upgrading out Exchange servers from SP2 to SP3 RU7. We are currently using an Avaya phone system and have Dialgoc gate2ways between these systems to allow us to get the voice mail into the end user's mailbox as a wav file. We are using
the DMG2120's with code many years old. Has anyone had any issues or know of anyone that has had issues?

Hi,
I have checked the your question from our internal channel and did not find any related compatibility issues with the update. I also check the third-party forum but still cannot find any threads about any potential issues.
I think we can feel free to do the upgrade. If you would like to double confirm the question, you can also ask a question in Dialogic forum for more help:
http://www.dialogic.com/den/developer_forums/f/default.aspx
Note: Microsoft is providing this information as a convenience to you. The sites are not controlled by Microsoft. Microsoft cannot make any representations regarding the quality, safety, or suitability of any software or information found there. Please
make sure that you completely understand the risk before retrieving any suggestions from the above link.
Additionally, there is an article about the IP gateway partners, AudioCodes and Dialogic, to add to the list of PBXs that are tested
by Microsoft currently:
http://technet.microsoft.com/en-us/library/ee681657(v=exchg.141).aspx
Regards,
Winnie Liang
TechNet Community Support

Ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second

ipod nano 7th generation having issues with the UI. Out of box everything worked great. Once I snyc the device and it finished, the UI becomes unuesable. You have to double tap every icon in order to open music, videos, etc. I cannot swipe to the second page of icons, black box appears around an icon and then switches to a different one anytime I swipe. A box even appears around the time and battery power. iPod & iTunes are both updated. What is the FIX on this issue?

I had this problem as well. This is what I found by searching online. I tried the fix on my nano 7th gen and it worked. I hope this helps you. Make sure to use two fingers for sliding and double-click the icons to get into settings. Good luck.
It would seem that Voiceover has been enabled on your iPod Nano. The following article contains information regarding Voiceover, and how to disable it once it's been enabled.
iPod nano (6th generation and later): How to use VoiceOver
http://support.apple.com/kb/HT4317
To turn off VoiceOver on iPod nano using VoiceOver gestures
From the Home Screen, swipe right or left with two fingers until you see or hear "Page 2 of 2" on iPod nano (7th generation) or "Settings" on iPod (6th generation).
If the icons have been rearranged, or if there are more than four Home screens, you may hear something different.
Slide one finger around the screen until you hear Settings.
Double-tap to open Settings.
Slide your finger up or down the screen until you see or hear General, then double- tap.
Slide your finger up or down the screen until you see or hear Accessibility, then double-tap.
Slide your finger up or down the screen until you see or hear VoiceOver, then double-tap.
Double-tap when you hear "VoiceOver switch button on."
You'll hear "VoiceOver off" to confirm the setting. Now you can use standard gestures to control iPod nano.
Note: You can also turn off VoiceOver by resetting your iPod.

TS4363 Issues with the Exchange mail after upgrade to the lion x

I can access my emails of my job in my iphone 5 and in my tablet. In the pass I used to access it by my macbook pro, but after updated to the IOS X, I got issues with the Exchange in the mac.

Found the answer here: https://discussions.apple.com/thread/4138783

Hp Envy X2 issues with the touchpad gestures

I am experiencing some issues with the touchpad gestures after every time it wakes up. I am already update the drives posted in the hp web site, is anybody out there with the same issues?

I couldn't find any graphic drivers for that notebook, but here is an updated chipset that is available for your notebook: http://h10025.www1.hp.com/ewfrf/wc/softwareDownloadIndex?softwareitem=ob-114872-1&cc=us&dlc=en&lc=en...
It was released 6 days ago, so it might enable that option for you. It can't hurt to try it out. If not, you might just have to hold out a little bit until they update the driver.
-------------How do I give Kudos? | How do I mark a post as Solved? --------------------------------------------------------

Issue with the Access Sequence related to Pricing

Similar Messages

Maybe you are looking for