Issue with the Package/request while creating service from function module

Hi
I'm creating a service form a function module. After the web service creator starts, There is a last step that asks for package and transport request. If i choose local objects, showing error as "Test Objects cannot be created in foriegn namespaces. If i give the package as it is in the attributes of the function module and transport request, showing error as " No tasks exists under the request. What is transport request??
please if anyone has recently done such a process with NetWeaver PI 7.1. help me..
Thanks
Vijay

You have to create a package for your objectsin SE80 transaction.
How?
http://www.sap-img.com/basis/steps-for-creating-package.htm
Then assign this package name in your webservice creation.
When asked for a transaport request, create one(You will find a create transport request inthe pop up which prompts you for creation of transport request).
Regards,
ravi kanth talagana

Similar Messages

Error with the Package Request while uploading epub package onto ACS4.

Hi,
Error with the Package Request while uploading epub package onto ACS4.
There was an error with the Package Request::<error xmlns="http://ns.adobe.com/adept" data="E_PACK_DATABASE http://localhost/packaging/Package Incorrect%20string%20value:%20'\x92Apran...'%20for%20column%20'creato r'%20at%20row%201"/>
Cheers
Vikas

See http://forums.adobe.com/thread/771689?tstart=0

Error while creating webservice from function module in ECC

Hi
while creating a web service out of a function module in ECC, in the configure service section we get a message saying ' Remember that the service does not have any runtime configuration and therefore cannot be used. Create the Web service configuration in the NetWeaver Admninistrator (transaction WSADMIN2).'
instead of check box 'release for runtime'.
Our ECC at release 7 patch level 22.
Checked in SCICM, SICF teh service and the folder are active.
Please suggest if we are missing on anything
Regards
Kumar

In new version on ECC, the runtime configurations needs to be performed in transaction SOAMANGER.
On executing the transaction, it opens a browser. The important configurations to be performed are:
1. Configure J2EE server and host. You can choose to provide the ECC server and host
2. Administration of the service in "Single Service Administration". The navigation path may differ depending of the ECC versions. But it is related to administration of the services.
Once done, check the WSDL generated.
Use this WSDL in the NWDS.
Regards,
Sharath

How to create webservice from function module

Hello,
I'm trying to create webservice from function module from. I choose Utilities/More Utilities/Create Webservice/..From function Module. What data should I enter in section "Enter Package/Request" ?
When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign namespaces"
Is there any doc about this procedure (web service creation) with description of all sections ?
thanks for any reply,
Lukasz Ferenc

Hi,
Which SAP product of wich release of which SP are you using ?
The procedure is documented in help.sap.com and in blogs and SDN forum messages.
It means that the use of the SEARCH button should give plenty of answers...
>When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign >namespaces"
As usual, begin your choosen name with an "Z".
Regards,
Olivier

Urgent: Web Service from Function Module

Hi guys, I am new to this area so please help to achieve following:
I want to show a demo to load data from a web service to BI. I have performed the following steps and dont know how to process further. Please help me in the sense where do I put the logic to show fields on the web service and .
1. I have created a web service data source in BI with four fields (Cal dat, material, amount and currency)
2. This created a Web Service /RFC FM automatically.
3. From this FM I created a web service (Utilities create web service from function module)
4. I followed the web service creation wizard.
Thanks,
sam

releasing and related steps are fine,
what i want to know is, BW/BI datasource will create a FM, from this FM inturn I will create a webservice.
Lets say BW/BI datasource has 4 fields account, company, amount & currency.
I want to enter these 4 values from the webservice which will bring these values to BW delta queue and eventually get loaded in BW.
For this process do I need to code anything in the FM or any other part of the system

I generated web service from function module.Where can I find .wsdl file ?

Hi,
I generated web service from function module.
Where can I find .wsdl file ?
I want to use .wsdl file in .Net application.
Thanks.

Hii Cemil Bozlagan,
All Remote enabled Function Modules in Web AS 6.20 and Above are available as Webservices and the WSDL documents are available in the web service repository at
[http://<host>:<port>/sap/bc/bsp/sap/webservicebrowser/search.html]
Find the respective BAPI.
Click on the WSDL link in the browser and download the WSDL document and use it as per the requirement
Regards,
Varun

Creating Spool from function module

Hi friends,
I want to create a spool from my function module. I dont knw it is possible or not. Currently I am creating spool by submitting another report from my function module and exporting the values calculated in memory ID and importing in report which is not a good practise, kindly suggest some other way.
Thanks,
Brijesh

No. Spool is not possible from Function Module. You have to use that FM from one report/program.
Thanks
Subhankar

Issues with the SQL wrapper scripts created with the DB adapter

Hi All,
We have the wrapper sql scripts created with the DB adapter configurations which are being used to invoke the stored procedures.
To give you a background on the wrapper sql scripts-The Adapter Configuration wizard generates a wrapper API when a PL/SQL API has arguments of data types, such as PL/SQL Boolean, PL/SQL Table, or PL/SQL Record.
These two SQL files are saved in the same directory where the WSDL and XSD files are stored, and are available in the Project view.
The issue we are facing now is that whenever the associated package or the procedure structure undergoes a change we see an error as given below:
An unhandled exception has been thrown in the ESB system. The exception reported is: "org.collaxa.thirdparty.apache.wsif.WSIFException: esb:///ESB_Projects/Application1_ABC_ESB/DBADP_Update_Out.wsdl [ DBADP_Update_Out_ptt::DBADP_Update_Out(InputParameters,OutputParameters) ] - WSIF JCA Execute of operation 'DBADP_Update_Out' failed due to: Error while trying to prepare and execute an API. An error occurred while preparing and executing the APPS.XXIRIS_SOA_R_WRAPPER.XXIRIS_AR_CUST_K$ API. Cause: java.sql.SQLException: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body "APPS.XXIRIS_AR_CUST_K" has been invalidated ORA-04065: not executed, altered or dropped package body "APPS.XXIRIS_AR_CUST_K" ORA-06508: PL/SQL: could not find program unit being called: "APPS.XXIRIS_AR_CUST_K" ORA-06512: at "APPS.XXIRIS_SOA_R_WRAPPER", line 1 ORA-06512: at line 1 [Caused by: ORA-04068: existing state of packages has been discarded ORA-04061: existing state of package body
In such cases we need to either execute the wrapper scripts again or refresh the connection pool in case the wrapper sql scripts for that procedure are not available.
In some cases we see that the first instance errors out.However the second request and the subsequent requests after that goes through successfully.
Please do let me know if anyone has faced such issues before.
Any inputs in this regard would be of great help.
Thanks in advance!
Deepthi

I stumbled on a link in the oracle forum which says that the "create or replace package XXX" at the start of the PL/SQL procedure when run seems to intermittently cause the ORA-04068: existing state of packages has been discarded problem.
As per the solution suggested an “alter package XXX compile" can be executed after the changes are made and then we would no longer get the error in BPEL/ESB and dont have to bounce the server too.
__http://forums.oracle.com/forums/thread.jspa?threadID=185762_
However the above solution does not seem to resolve the issue.
Any help in this regard would be highly appreciated.
Thanks,
Deepthi

Issue with whitespace is required while creating datamodel for bi answers

Hi while creating data model for publisher report using oracle bi answers getting an issue for whitespace is required .
Please reply if anyone know the solution.

In my case that was because the measure was a calculated one (FILTER...).

Error MG-144 occurring while creating article by function module

Hi Experts,
I have requirement to create the article in MM41 by function module, I have used WRF_MATERIAL_MAINTAINDATA_RT function module. But it is giving error MG-144 saying the field MARC-DISMM is defined as required field ; it doesn't contain any entry. I am passing values to planatdata-mrp_type and planatdatax-mrp_type = 'X' also. Please help me out. Thanks In advance.
With Regard's
madhu.

The CREATE FM should not only create the entry, it should also EXPORT the key that it uses to create the entry. Is it doing that?
i.e. the CREATE signature is usually something like:
CREATE_BLAH
IMPORTING header TYPE header_row
EXPORTING key type header_row-key_field.
So the 'key' here should be filled by the FM and returned to DOE.

Calling Web Service from Function Module

dear all
i am new to SAP.
i have a web Service developed with .net and C#.
i want to call this web Service from inside a function module.
how can i do this ?
thanks,

Hi Ramzy,
Please browse through chrome or sdn , there is a lot of documents and discussions, any how find the below URL, which might be helpful.
Create an SAP Web Service Consumer (calling External Web Service from ABAP)
Create a Function Module and full the below Code :
Sample code :
DATA: http_client TYPE REF TO if_http_client,
      host_str TYPE string VALUE 'www.myservice.in',
      service_str TYPE string,
      path TYPE string VALUE 'my path',
      errortext TYPE string. "used for error handling
DATA : wf_string1 TYPE string,
         lw_inputs TYPE string,
         error_text type string,
         subrc TYPE SY-SUBRC,
         lw_outputs TYPE string.
CALL METHOD cl_http_client=>create_by_url
EXPORTING
    url                = 'myurl'
IMPORTING
    client             = http_client
EXCEPTIONS
    argument_not_found = 1
    plugin_not_active = 2
    internal_error     = 3
    OTHERS             = 4.
IF sy-subrc <> 0.
* MESSAGE ID sy-msgid TYPE sy-msgty NUMBER sy-msgno
*             WITH sy-msgv1 sy-msgv2 sy-msgv3 sy-msgv4.
ENDIF.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = '~request_method'
    value = 'POST'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = '~server_protocol'
    value = 'HTTP/1.1'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = '~request_uri'
    value = 'mypath'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = 'Content-Type'
    value = 'application/soap+xml; charset=utf-8'."'text/xml; charset=utf-8'.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = 'Content-Length'
    value = '19000'."txlen.
CALL METHOD http_client->request->set_header_field
EXPORTING
    name = 'SOAPAction'
    value = 'myURL'.
concatenate 'data u need sned' into wf_string
CALL METHOD http_client->request->set_cdata
EXPORTING
    data   = wf_string1
    offset = 0
    length = '19000'.
Regards,
Lokeswar.

How to create IDOC from Function module or RFC

Hi all,
I have tested one inbound IDOC for Time Upload to CAT2 using basic type "CATS_INSERT01" in WE19 through function module BAPI_IDOC_INPUT1 .It works well.
Now i need to create this IDOC once the sale order gets created thru BAPI.
For creation of Sale order i wrote one RFC in which i will call the Standard Sale Order Bapi.My question is once the Sale order gets created in that RFC How do i trigger the IDOC for CATS upload.

Hi,
Which SAP product of wich release of which SP are you using ?
The procedure is documented in help.sap.com and in blogs and SDN forum messages.
It means that the use of the SEARCH button should give plenty of answers...
>When I check "Local object" checkbox I get a message "Test objects cannot be created in foreign >namespaces"
As usual, begin your choosen name with an "Z".
Regards,
Olivier

Problem with the JDBC URL while creating a new connection pool

Hi,
I am trying to install soademo application in my desktop and was unable to create a connection pool. Test connection fails even though I have provided the correct values (I confirmed these values with tnsnames.ora file).
Anyone has experienced this before and resolved it then please let me know it.
Thanks in advance,
Sateesh

I was trying to create a connection pool from Cluster Topology > Application Server: CRMSOA.PC000121 > OC4J: home > JDBC Resources > Create a button in the connection pool section
The values which I have given are:
Driver Type: ThinOCI
DB Host Name: PC000121
DB Listener Port: 1521
DB Identifier Type: Service NameSID
SID/Service Name: XE
And the Error message is:
Error
Unable to establish connection. Error message: Exception occurred testing connection. Exception: java.sql.SQLException: invalid arguments in call.
Thanks,
Sateesh.R

Has anyone had issues with the backing of 5c coming apart from phone?

I have the 5C and always keep a case on it. I noticed today that on the left corner, the back casing is coming off of the phone. I am not happy with this and want to go in the store but I know they will tell me I dropped the phone. I am anal retentive about taking care of my phone. Has anyone else had this issue?

sackster77 wrote:
{snip}. . .Has anyone else had this issue?
Answering this question will not help your issue. You need to take the iPhone to the nearest Genius Bar. That's the only solution that will reach an affirmative result.
http://www.apple.com/retail/locator/

Is there anyone having an issue with the apple tv when selecting music from the home screen?

Is there anyone in the community having an issue playing music from the home screen of the apple tv? When selecting the music app my apple tv restarts. If anyone else is having the same issue and has corrected the problem please share the solution.

Working fine here, and have not seen any other reports. I would restore your unit
Apple TV (2nd and 3rd generation): Restoring your Apple TV - Apple Support

Issue with the Package/request while creating service from function module

Similar Messages

Maybe you are looking for