Issue with WEBSERVICE- PROCESSDIALOG method

Hi Guys,
              I am calling WEBSERVICE->PROCESSDIALOG method in a task.
This is listing a task in UWL in EP. When I open and process this task getting the following error.
Page not found or Available.
How to find out which view is called when I select the task in UWL.
I think it will probably an WebDynpro iView.
Cheers
Senthil

Hi,
     Its basically Page Not Found error in UWL.
There are other process in the same workflow are working fine in UWL.
I check the services in SICF, they are active.
Is there anything I am missing in the task definition.
Is it WebFlow Service Executed should be active at the task outcome tab.
Cheers
Senthil

Similar Messages

  • Performance issues with Webservices in XI

    Hi,
    Friends,
    my issue is with the performance of webservices.how to improve performance of webservices in XI?
    We don't have any hardware issues.no big mapping or payload.webservice is actually residing in the XI server.there is a bottleneck somewhere which is hampering the performance.
    Any advice is greatly appreciated!
    Thanks and Regards,
    Pavan M.
    Chicago,US

    Hi,
    Is XI a webservice provider or consumer?
    If XI is the consumer, then you can use any SOAP client tool (there are lots of generic 3rd party soap client test tools on the internet) to execute the webservice to detemine whether it is causing performance problem.
    If XI is the provider, you can take the sender soap adapter out of the equation by using a HTTP client test tool.
    The SXI_MONITOR also provides execution time for every step in the pipeline of the XI engine.
    Regards,
    Bill

  • Issue with webservice data control while invokin bpel process from ADF side

    Hello Experts,
    we are creating webservice data control to invoke bpel process from ADF side.
    When I run the application and inovoke the bpel every thing is working fine.
    But when we are changeing the instances from DEV to SIT the bpel url(hostname and port) will change.
    So we just edited DataControls.dcx file and we just replaced the wsdl url and trying to run the applicaiton.
    This time the applicaiton is not invoking the bpel process.
    If I remove the webservice data control and recreate it with new WSDL url then it is working fine.
    Can any one tell us what the exact issue is. Is there any other files do i need to modify or etc.
    Thanks & Regards
    Gayaz

    DataControls.dcx & connections.xml (.adf/META-INF)

  • Issue with std GET method GET_PROPERTY_AS_VALUE

    Hi,
    We have created a Z field using AET in WebUI which is already moved to Production system. This field has a Get and Set method customized to populate its value.
    Now we have included  similar field with a similar logic. The issue is that now the earlier field is not able to read certain attribute values using the standard method IF_BOL_BO_PROPERTY_ACCESS~GET_PROPERTY_AS_VALUE
    Line......LV_PROPERTY_REF = GET_PROPERTY( IV_ATTR_NAME )
    We have not made any changes in the code, then why the system is unable to read the attribute value in our Test client.
    Any hints?
    Regards,
    PP

    Hi Pepe,
    Cant answer your question without debugging but below are few things you can try out:
    1. In case you are writing custom code, try to use other method like get_property_as_string or get_property and see if they    return a value.
    2. Check your design layer if both the fields are present there.
    I don't see any other reason. If no luck with above two then please raise an OSS.
    Regards,
    Bhushan

  • Issue with Webservice for HR

    This is my problem. Have been at it for a few days now and have very little hair left.
    I have a custom BAPI that wraps ENQUEUE, BAPI_ADDRESSCREATESUCCESSOR and DEQUEUE.
    Works like a charm when executed in se37. When I make a webservice out of it, it complains "Fill in all required entry fields". I have even hardcoded the values to be passed in the BAPI itself and still does it.
    Basically no matter what I do, it complains there is something missing. I enter values for every import parameter that is being passed, still no avail.
    I also tried the same thing with the DELIMIT bapi, and the same issue. I am ofcourse trying from wsnavigator to test this and always get the same error message. Have tried to set breakpoints etc - still the same error. What pisses me off is that the BAPI works from se37. Anyone have any ideas with such situations?
    Thanks.

    Hi BR,
    How are you testing the web service? Soap client?
    I had something slightly similar the other day, that was caused by a mandatory export parameter not being passed back. Maybe that's something you could check?
    Best Regards, Trevor

  • Issue with LSMW IDOC method

    Hello there,
             I am facing an issue while creating a LSMW using IDOC method. I am creating it for PROFIT CENTER upload. My file is having the data as, there can be multiple company codes for one profit center, so my file will have more than one record for single profit center. I have to create only one IDOC per profit center, so I have to create multiple segments in that IDOC for different company codes.
             I am not sure how to create multiple segments using LSMW. It will be very helpful, if anyone can tell me how to do it.
    Thanks,
    Ganesh Khumse

    Hello Ganesh,
    I assume that you are using the IDoc Type PRCMAS02 for the creation of Profit Centers along with Company Code assignment.
    In order to be able to extend the Profit Center for Multiple Company Codes, please segregate the source structures into Profit center general data and company code data...along with respective source fields.
    In the structure relations, assign the Profit Center General data to the Idoc segments E1KEPCM & E1KEPCT. Then assign the Company Code data to the segment E1KEPCB.
    The input file layout expected will be something similar to the below layout...
    PCHEAD1
    - CCODE1
    - CCODE2
    PCHEAD2
    - CCODE1
    - CCODE2
    Hope this info resolves your problem.
    Pls reward if this answers your query.
    With Regards
    Vijay Gajavalli

  • XML format Issue with Webservice

    Hi,
      Currently when I generate the XML payload in XI, it is generating as below one. But the 3rd party webservice is expecting everything in on elong big string. How can I do this in XI to convert my XML data after mapping to one long string before calling the webservice.
    Current XML Data
    <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:PutXMLDocument xmlns:ns1="http://test.com/SMIWebService/">
    - <XMLString>
    - <Contracts>
    - <Control>
      <createdWhen>2006-06-13T06:27:12</createdWhen>
      <destinationAddress />
      <documentGUID>e4a14426-9d02-4e2e-8a91-68fc81f1a672</documentGUID>
      <operation staticValue="Change" />
      <schemaVersion>31N</schemaVersion>
      <sourceAddress>Global</sourceAddress>
      <version>3.00</version>
      </Control>
    - <Contract>
      <contractAmount>2050.00</contractAmount>
      <contractBillingType staticValue="Per Contract" />
      <contractCurrency staticValue="United Kingdom - Pound">Constant</contractCurrency>
      <contractDataSource dynamicValue="SAP">Constant</contractDataSource>
      <contractEffectiveDate>2007-01-01</contractEffectiveDate>
      <contractExpirationDate>2007-12-31</contractExpirationDate>
      <contractIdentifier>ff27ab1e-3187-4d37-9122-24769d246c9d</contractIdentifier>
      <contractIncludeLaborIndicator>1</contractIncludeLaborIndicator>
      <contractIncludeLaborIndicatorForOther>0</contractIncludeLaborIndicatorForOther>
      <contractIncludeMaterialIndicator>1</contractIncludeMaterialIndicator>
      <contractIncludeMaterialIndicatorForOther>0</contractIncludeMaterialIndicatorForOther>
      <contractLaborDuration>0</contractLaborDuration>
      <contractLastRenewalDate>2007-11-01</contractLastRenewalDate>
      <contractMaterialDuration>0</contractMaterialDuration>
      <contractNotificationDate>2007-11-01</contractNotificationDate>
      <contractNumber>0040000189</contractNumber>
      <contractReconciliationStatus staticValue="Reconciled" />
      <contractStartDate>2007-01-01</contractStartDate>
      <contractStatus staticValue="Active" />
    - <Customer>
      <customerIdentifier>fe3ccebc-6f64-4849-95d5-0b3b84c204d6</customerIdentifier>
      </Customer>
    - <contractBusinessUnit dynamicValue="UK">
      <businessUnitDescription>United Kingdom</businessUnitDescription>
      </contractBusinessUnit>
      </Contract>
      </Contracts>
      </XMLString>
      </ns1:PutXMLDocument>
    3rd Part Expectation
      <?xml version="1.0" encoding="UTF-8" ?>
    - <ns1:PutXMLDocument xmlns:ns1="http://test.com/SMWebService/">
      <ns1:XMLString><Contracts><Control><createdWhen>2006-06-08T07:03:55</createdWhen><destinationAddress></destinationAddress><documentGUID>A9A5107B-45A6-43A4-8218-D72C8115C9CB</documentGUID><operation staticValue="Change"/><schemaVersion>31N</schemaVersion><sourceAddress>Global</sourceAddress><version>3.00</version></Control><Contract><contractAmount>2050.00</contractAmount><contractBillingType staticValue="Per Contract"/><contractCurrency staticValue="United Kingdom - Pound"/><contractDataSource dynamicValue="SAP"/><contractEffectiveDate>2007-01-01</contractEffectiveDate><contractExpirationDate>2007-12-31</contractExpirationDate><contractIdentifier>ADBBF61C-8188-4614-B38E-C66853BD18DF</contractIdentifier><contractIncludeLaborIndicator>1</contractIncludeLaborIndicator><contractIncludeLaborIndicatorForOther>0</contractIncludeLaborIndicatorForOther><contractIncludeMaterialIndicator>1</contractIncludeMaterialIndicator><contractIncludeMaterialIndicatorForOther>0</contractIncludeMaterialIndicatorForOther><contractLaborDuration>0</contractLaborDuration><contractLastRenewalDate>2007-11-01</contractLastRenewalDate><contractMaterialDuration>0</contractMaterialDuration><contractNotificationDate>2007-11-01</contractNotificationDate><contractNumber>0049900189</contractNumber><contractReconciliationStatus staticValue="Reconciled"/><contractStartDate>2007-01-01</contractStartDate><contractStatus staticValue="Active"/><Customer><customerIdentifier>FE3CCEBC-6F64-4849-95D5-0B3B84C204D6</customerIdentifier></Customer><contractBusinessUnit dynamicValue="UK"><businessUnitDescription>United Kingdom</businessUnitDescription></contractBusinessUnit></Contract></Contracts></ns1:XMLString>
      </ns1:PutXMLDocument>
    Thanks in advance for the help.
    Thanks
    Sri

    Hi,
    Check this Blog-
    /people/michal.krawczyk2/blog/2005/11/01/xi-xml-node-into-a-string-with-graphical-mapping
    Hope this helps,
    Regards,
    Moorthy

  • Sender SOAP Adapter issue with webservices for authorization.

    Hi All
    Issue:
    As we are developing a Web Service to fetch account balance from SAP(upon receiving the account no from client) and have given the wsdl file to J2EE application  to call or make use of the service.  But as a part of that service they expect userid/password to be entered manually from client  pop-up.  At this point of time, we don't want to enter userid/password manually but  we want this to be hardcoded/embedded in Webservice so that  there is no need of manual intervention upon calling this service.
    Actual Requirement:
    From Webservices to R/3-ECC6.0-IS-Banking-RFC (Synchronous Interface)
    Sender: SOAP Adapter synchronous
    Receiver: RFC Adapter synchronous
    Note: Requesting a account number and getting response from RFC is account Balance and Date to webservice
    Regards
    Kiran kumar.s

    Hi praveen,
    Thanks for ur  reply.What you said is exactly right but for time being i have to make the client not get the authorization(password--Username and password(pop-up)) when he invokes the WSDL into webservice for that u told that to write some hardcode in J2EE application,but i don't know that where to write and what to write.so, if possible can u give me the code and procedure.
    This is the URL:
    http://hcl3sap:50000/XISOAPAdapter/MessageServlet?channel=:BS_WEBSERVICE:CC_SOAPSENDER
    Regards,
    kiran kumar.

  • Issue with Webservice

    Hi All,
    I have created a WebService in SE80 and had done all the settings. But when I am trying to publish the Websercie using WSPULISH and I am getting the error "Exception raised during physical system publication. Code : "
    Can anyone help me out with a solution.
    I have gone through the blogs and checked all the configuration mentioned in them. Everything seems right.
    Regards,
    Kavuri.

    DataControls.dcx & connections.xml (.adf/META-INF)

  • Issue with JSF action method and Popup

    All,
    I have command Button, which has an action method. And my onclick function opens new popup. Once I close the popup, it has to return some values to the parent page and then my action method has to be executed.
    Issue is if I close the popup, nothing is happening in parent page.
    In my JavaScript if I return true, popup is opening and my action method is executing. But my expected behavior is after closing popup then only my action has to be executed.
    Thanks,
    Dhana

    Hi all,
    I came back to this today (after almost 2 years)... the current version of facestrace doesn't require a taglib at all: http://code.google.com/p/primefaces/downloads/list
    Just drop it in WEB-INF/lib, add *.jsf to the url mappings for the faces servlet. Then whenever you add trace=true to your URL, you get a nice dump of information there.
    Best,
    John

  • Issue with calling a  method activity before page render

    Hi All,
    I am using Jdeveloper 11.1.1.7.
    I am trying to achieve the approach defined in "1.b. Calling a Method in Backing Bean:" elaborated in the blog - https://blogs.oracle.com/adf/entry/an_epic_question_how_to
    As illustrated, I defined a default method activity (binding to a method in managed bean) and a view activity activity in a bounded task flow.
    When I launch the application (running the view activity), following error is encountered -
    oracle.adf.controller.metadata.ParsingException: ADFC-02020: Cannot find default activity 'check' in task flow definition '/WEB-INF/task-flow-definition.xml#task-flow-definition'.
        at oracle.adfinternal.controller.metadata.model.xml.XmlUtil.createAndLogParsingException(XmlUtil.java:474)
        at oracle.adfinternal.controller.metadata.model.xml.MetadataResourceXmlImpl.parseTaskFlowDefinition(MetadataResourceXmlImpl.java:507)
        at oracle.adfinternal.controller.metadata.model.xml.MetadataResourceXmlImpl.parse(MetadataResourceXmlImpl.java:361)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.parseResource(MdsMetadataResourceProvider.java:748)
        at oracle.adfinternal.controller.metadata.provider.mds.MdsMetadataResourceProvider.getMDSCachedResourceOrParse(MdsMetadataResourceProvider.java:732)
    Please advise.
    Best Regards,
    Ankit Gupta

    Hi Cvele, Timo,
    Many thanks for the suggestions.
    To avoid confusions, I have created a new application altogether. It seems that the method call is not being called when I run the page.
    For your reference I have attached the task flow definition and method code below -
    Task Flow Definition
    <?xml version="1.0" encoding="windows-1252" ?>
    <adfc-config xmlns="http://xmlns.oracle.com/adf/controller" version="1.2">
      <task-flow-definition id="task-flow-definition">
        <default-activity id="__1">methodCall1</default-activity>
        <managed-bean id="__11">
          <managed-bean-name id="__13">TestBean</managed-bean-name>
          <managed-bean-class id="__10">TestBean</managed-bean-class>
          <managed-bean-scope id="__12">request</managed-bean-scope>
        </managed-bean>
        <view id="view1">
          <page>/view1.jspx</page>
        </view>
        <view id="exception">
          <page>/exception.jspx</page>
        </view>
        <method-call id="methodCall1">
          <method>#{requestScope.TestBean.checkURL}</method>
          <return-value id="__15">#{TestBean.checkURL}</return-value>
          <outcome id="__14">
            <to-string/>
          </outcome>
        </method-call>
        <control-flow-rule id="__2">
          <from-activity-id id="__3">methodCall1</from-activity-id>
          <control-flow-case id="__5">
            <from-outcome id="__6">go</from-outcome>
            <to-activity-id id="__4">view1</to-activity-id>
          </control-flow-case>
          <control-flow-case id="__8">
            <from-outcome id="__9">error</from-outcome>
            <to-activity-id id="__7">exception</to-activity-id>
          </control-flow-case>
        </control-flow-rule>
      </task-flow-definition>
    </adfc-config>
    Method Code
    public String checkURL() {
    // Add event code here...
    System.out.println("method activity called");
    return "error";
    Best Regards,
    Ankit Gupta

  • Issue with Webservice Creation using Session Beans.

    Hi All,
    I want to expose my Session beans as webservice.
    I'm using Weblogic Application Server.
    When I do the modeling using JDeveloper, I'm unable to convert the Session bean to webservice.
    Any information on this is highly appreciable.
    Thanks & Regards,
    Kumar Madhavan.

    I can't give you much of a walk through, as I have just started it myself, but I'm using a universal unique identifier to represent each client. Whenever a client posts data from a jsp or applet the uuid is also sent. I use POST to pass all my parameters. If the server hasen't received data in say 5 minutes from the client then it is assumed the client went offline. Its working for me so far.
    COn

  • Popupwindow issue with OAF avilable methods

    Hi
    the below code is working fine
    but my requirment is
    1.from the pop-upwindow if i Click yes button in popup window it shd got to a standard OAF page location(eg.a.jsp) in the basepage itself and the popup window shd be closed
    2.the a.jsp(OAF page) shd load with a popupwindow as of below code
    any one plzz tell me
    3. OAButtonBean bt1=(OAButtonBean)webBean.findChildRecursive("Yes");
    bt1.setDestination("OA.jsp?page=/oracle/apps/csd/ro/mgmt/webui/HvrRepairMainPG");
    does this work in PR the above code is from popupwindow
    System.out.println("Before...popupwindow");
    OALinkBean link = (OALinkBean)webBean.findChildRecursive("RoNumTblData");
    System.out.println("In Popupwindow");
    String page1 ="/oracle/apps/csd/ro/search/webui/Popupwindow&retainAM=Y";
    System.out.println("Still in Popupwindow");
    String destURL = APPS_HTML_DIRECTORY + OAWebBeanConstants.APPLICATION_JSP + "?"+ OAWebBeanConstants.JRAD_PAGE_URL_CONSTANT+ "=" + page1;
    OABoundValueEmbedURL jsBound = new OABoundValueEmbedURL(link,"openWindow(self, '", destURL, "' , 'longTipWin', {width:"+200+", height:"+200+"}, true); return false;");
    link.setAttributeValue(oracle.cabo.ui.UIConstants.ON_CLICK_ATTR, jsBound);
    System.out.println("After Popupwindow");

    Hi,
    Are you running the page from Jdev or in the server,
    If you are running the page from Jdev, use
    System.out.println("Your message here");
    If you are running from server,
    you can use
    IN CO: pageContext.writeDiagnostics(moduleName,diagMessage,OAWebBeanConstants.STATEMENT);
    IN AM: this.getOADBTransaction().writeDiagnostics("XXINV_AM",errorTxt.toString() ,OAWebBeanConstants.STATEMENT);
    And the enable diagnostics and use view log on screen option at your level (here STATEMENT)
    Number primaryKey = row.getSupplierId();
    //Print the values primaryKey and poToDelete
    if (primaryKey.compareTo(poToDelete) == 0)
    //Add a diag message here
    row.remove();
    getTransaction().commit();
    break; // only one possible selected row in this case
    If you run from JDEV it is easy to debug.
    Thanks.
    With Regards,
    Kali.
    OSSI.

  • Issues with scrollintoview javascript method in ie10.

    Hi,
    scollintoview(false) javascript method causing the entire web page to shift to the left side of the window in ie10. Where as it is working perfectly fine in ie9.
    Thanks in Advance.
    Regards,
    GopiChand

    function scrollView() {
    var d, y;
    d = document.createElement("div");
    d.style.position = ("fixed");
    d.style.height = ("100%");
    d.style.margin = ("0");
    d = document.body.appendChild( d );
    y = Math.floor( d.getBoundingClientRect().height );
    if (!y) {y=d.clientHeight}; // for IE8
    document.body.removeChild( d );
    d = inPut;
    y = ( d.offsetTop + d.offsetHeight - y );
    while (d = d.offsetParent) { y += d.offsetTop };
    if (y>0) { window.scrollTo(0,Math.ceil(y+1)) }; // add an extra pixel for IE, which randomly is short by 1
    scrollView();
    Here's a snippet from some working code that positions an element (button) named inPut to the bottom of the viewport.  The bottom of the inPut (button) aligns directly on the bottom of the window.
    The majority of the code just finds the viewport size, by temporarily creating a fixed div.  (then removes it).  Next, the document offset to the button bottom is calculated,
    minus viewport height.  That's the y coordinate which we ultimately place in the viewport upper left corner.  The only tricky thing is in the while loop, where the pixel offset from the button's top to its parent container is added,
    iteratively, for each containing box.
    In this example, only vertical scrolling happens.  The element stays at its natural horizontal position.  In the case where you want to retain the present horizontal tree offset of your element, just capture the present x offset and replace "0"
    in the scrollTo.  Pretty easy mod.
    Here are some links that explain the properties and methods used.
    https://developer.mozilla.org/en-US/docs/Web/API/HTMLElement.offsetTop
    https://developer.mozilla.org/en-US/docs/Web/API/HTMLElement.offsetHeight
    https://developer.mozilla.org/en-US/docs/Web/API/HTMLElement.offsetParent
    https://developer.mozilla.org/en-US/docs/Web/API/Window.scrollTo
    https://developer.mozilla.org/en-US/docs/Web/API/Element.getBoundingClientRect
    https://developer.mozilla.org/en-US/docs/Mozilla/Tech/XPCOM/Reference/Interface/nsIDOMClientRect
    http://dev.w3.org/fxtf/geometry/#DOMRect
    So, it's not pretty, but it's not so awful either.  Too bad, but the scrollIntoView() method is generally speaking useless due to its left-justification in the name of simplicity.

  • Issue with amodal secondary method in workflow

    Hi,
    I'm using an amodal secondary method of a business object in my workflow activity step. But it is not triggering that method of the business object at runtime.
    Could someone tell me what might be the problem
    Regards,
    Vijay

    Any idea guys?

Maybe you are looking for