Issues related implimatation very urgent

can you please send some real time issues with solutions faced during the project preaparation, gap analysis,blue printing and realization stage to <REMOVED BY MODERATOR>
thanks in advance

Hi Madhu,
Please check the validity date of the factory calendar for which you are getting error.
Also i would suggest to check if there is any other Factory calender used in the workcenter and in turn gettting copied to routing/order, for which validity period is a problem.
Use transaction SCAL to check calendar and for work center CR03 and header data.
Hope this helps... reward your points if helpful,
Thank you,
Regards,
Prasobh

Similar Messages

Tax issue in US - very urgent. !!

Dear All,
Someone from SAP told me that :
"In US localisation the tax is depending
only on the delivery and good receipt location.The tax code will apply for all the item depending on the Business partner ship to address in case of a delivery and on the location of warehouse in case of goods
receipt"
However, when i ask the end user from US, he told me that in one invoice, there are items which have GST, while other items on that invoice have PST + GST. Under this situation, the tax setting cannot be "generic" based on the ship-to-address. So, could anyone share with me:
1, How to deal with this tax issue on one invoice?
2, what's the general practice in US in the tax area?
Million thanks

Have a look at this thread:
/thread/117232 [original link is broken]

Space issue in smartform(very urgent)

Hi ,
Im printing vendor address in a RFQ. In that i have to print different fields like,
company name
address
city, region postal code
responsible sales person
tel no.
if the "responsible sales person" field is blank then im getting a blank space there and after that tel no. is getting printed .
The issue is i dnt want that blank space. How to remove that space ?
Plz help me out.
thanks in advance,
Regards,
Shaheen.

Hi,
Tell me one thing... From the output you shown..
company name
address
city, region postal code
responsible sales person
tel no.
Is it the case that only fourth line will be present or absent OR
is this the case with all the line. ?
If it is with only fourth line then you can do one thing...
create two text elements with in the Condition.
Check for forth line data. If it is empty then print the data in text element only for remaining lines as...
company name
address
city, region postal code
tel no
else (if it is not empty )
then print the data as you are printing right now i.e.
company name
address
city, region postal code
responsible sales person
tel no.
I think it will work..
Thanks
Swati.

Issue related to Alerts ;urgent

Hi Folks,
I am facing a issue in alerts:
I want to capture all types of exceptions via alert messages in alertinbox .
Kindly let me know any prerequisites for this...?, Like do i need to configure any SMTP ...etc
I have created alert category with recipients in ALRTCATDEF . I am not using any rules...Kindly let me know where i am wrong..
what i feel that, i have configured alert successfully as i am receiving the alert messages in alert inbox only on executing RSALERTTEST program...
but when i am running my scenario with intentionally created errors i am not getting Alerts in my alert inbox but i can see errors in MONI.
I am currently working on PI 7.0
Points will be rewarded...
Regards,

Hi,
Check below links.
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--step-by-step
/people/michal.krawczyk2/blog/2005/09/09/xi-alerts--troubleshooting-guide
http://help.sap.com/saphelp_nw04/helpdata/en/49/cbfb40f17af66fe10000000a1550b0/frameset.htm
/people/siva.maranani/blog/2005/04/03/abap-server-proxies
Regards,
Phani
Reward points if Helpful

Plz help me TEXTPOOL PROBLEM(VERY URGENT)

hi experts,
plz help in resolving this issue this is very urgent.
error is
The line type of "RPOOL" must be compatible with one of the types
"TEXTPOOL".
and its coming in :
FORM GET_SELSCREEN_TITLE TABLES P_SCREENS STRUCTURE DYNNR.
DATA: BEGIN OF RPOOL OCCURS 20,
ID(1),
NAME(8),
TEXT(80),
END OF RPOOL.
READ TEXTPOOL RSVAR-REPORT LANGUAGE SY-LANGU INTO RPOOL.
plz help me.

Hi !
Try this :
DATA RPOOL LIKE TEXTPOOL OCCURS 0 WITH HEADER LINE.
Reward if usefull,
Regards,
Stéphane.

Stale Date Error in Advance Table...Its Very Urgent

Hi All,
I am getting stale data in Advance Table Regions. I am having to buttons, if I selected button1 it shows one advance table region (with show All and Hide All options) it is showing correct data in the details view.
If I select button2 and new advance table will be shown (with show All and Hide All options) and here if I select show all then I am getting stale data. For both advance tables I am using same two VO's (HeaderVO & DetailVO) but the Viewlinks are different.
For your reference below is the error.
Cause:
The number of displayed records, 8, exceeds the actual number of records, 1, in view object NetAppsProjCreationAM.ProjectLinesVO1_ProjectErrorVL_ProjectLinesVO. Some of the displayed records may have been deleted.
Please any one of you guys help me out in this issue, this is very urgent!!
Thanks in Advance.

Then it should work, can you check by putting debugging messages that your VO query is fetching rows properly?Also make sure that all transient columns attributes in VO wizard are not marked selected in query!
--Mukul

Very Urgent Extn.Material Group and Material Group.

Hi Guru's,
      I was created Generic D.S Using table (AFRU) for Orders Confirmation.I was Created Info Source AND ODS.
     I nedd to maitain ODS Extn.Material Group and Material Group.but These fields are not Avilable in Data Source (AFRU Table not having).
    Data source having Field AUFNR (order number) I was mapped To BW Object 0prodorder. I was maitained master data for 0prodorder.
0prodorder master data (0prodorder_attr) having 0material (PLNBEZ Field mapeed to 0material) as a navigational Attribute.
i am asking to all is it possible to bring Extn.Material Group and Material Group update rule level using master data attribute option?
Please help to me Above issue.it's very urgent.
Thanks & Regards,
Guna.

Hi Manju & Gopi,
    This Order Confirmations cube having data from 2 data sources.
    There is a performence issue to clubbing so many tables.
     Any way i was maitained 0material is attribute(Nav Attr) of 0proorder.i was loaded 0prodoreder master data.
   0material having master data .Extn mat group & Material group are Nav Attributes of 0material.
Now is it possible to maitaining the data in cube Extn mat group & Material group ?
Please Give me Suggestion with out adding another table using view.
Thanks & Regards,
Guna.

Regarding issue related to RPTBAL00.it's very urgent

hi All,
i am having one issue related to RPTBAL00 report.
this report will dispaly time wage types related to emplyoees.
using this report we can get informtion of time wage type like 9lc1,9lg1,plwp.
Now issue is this report is not running for payroll area 56.it's running properly for other payroll area.the pernrs realted to 56 payroll area have the data in there B2 cluster.i wanted to access data from zl table realted to 56 payroll area.
Please help to solve this issue.
who will help to solve this issue,i will give full points.
Regards,
manjunath

i did the same thing.in standard FM hr_time_results_get,it is accessing data from B2 cluster.after that it is checking condition for the date of last successfully run period.only for pernrs related to 56 payroll area it's not wking.for all other it's wking.
also i dnt have autorization to change std FM.

Hello I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair. Following my issue relating to a

Hello
I don't know who to complain to as you do not appear to have a complaints department, despite searching the web, I trust you can pass this to relevant department for action, as I'm very angry over my recent repair.
Following my issue relating to a blank screen 2 weeks ago, your advisor arranged for my iMac to collected by Amsys, for repair and return, this was done and it was returned to me last Tuesday, onWednesday I set up my iMac again and instantly realised I had problems, much worse than before. I called Amsys to inform them of the issue of the computer being very very slow and unable to open iPhoto and pages, and document listing would not show up, plus I had no sound on the mac.They informed me that they had only replaced the video card and what they had done would have not affected the computers performance. He suggested I reinstall OSX again which I did, but this made no difference to the programs, so I called you.
Your technician on the phone was very good as they have always been, and made an appointment for me to go into the Milton Keynes Apple store the next day at 1 pm, which I did.
The gentleman on the Genius Bar was very good and was able to run tests on the iMac in my presence, and diagnosed immediately an issue with the sound problem, and advised me that this could not be fixed while I wait and I would need to leave it for repair. I made him aware of the previous repair, and he was able to see via your system, the list of logged issues I have had with this since purchasing in September 2012. I'm sure you can see from the way you record all calls and issues the problems I have had.
Today I called to ask if my iMac would soon be ready for collection, I was told the repairs had been completed and it was being tested. However to my dismay, I learned of another serious issue relating to the repair carried out by Amsys. I was informed that 6 screws were missing from the the iMac internally, which caused me much distress and concern, they also told me I had to wait even longer as the screws had to be ordered and installed on arrival before I could collect it.
My issues here are: I trusted the Amsys repairer as it was arranged and recommend by you, it is very evident they are not competent to repair, as they have caused more problems with my iMac on its return, despite enclosing a checklist, fully ticked showing everything working well, it clearly wasn't ! Plus the issue of missing parts (screws) during the repair, I have already expressed my disgust with Amsys, by email and had a response, within the hour, apologising and told me they were looking into this.
This where I stand on this, I have not had my iMac for almost two weeks and I do not know when I will get it back. I'm also very worried about what other damage has been caused by Amsys and the quality of my iMac now. I want to know what you, Apple is going to do about this ? I have already been very inconvenienced by this and until now I have been a very loyal apple customer with 2 iPads, and 4 iPhones in our household, not to mention the iMac.
I feel I have been very let down by this experience, on my iMac, which cost a lot of money, I have also lost a lot of money with lost work and unable to carry out my business without it, and I will be seeking compensation.
I trust you will take this complaint seriously and pass it to the relevant department for action.
Yours sincerely
Des Withey
Sent from my iPad
On 26 Feb 2014, at 11:44, Apple Support <[email protected]> wrote:
Thanks for contacting us.
Thanks for contacting Apple Support. If you need more help later, you can open the case below or start a new support request online.
Case ID:
Open this case
Sincerely,
Apple Support
Get help online
Visit Apple Support to learn more about your product, download software updates, and much more.
Join the conversation
Find and share solutions with Apple users around the world.
TM and copyright © 2014 Apple Inc. 1 Infinite Loop, MS 96-DM, Cupertino, CA 95014.
All Rights Reserved / Privacy Policy / Apple Support / Give us feedback
On behalf of Apple Distribution International

Call Apple Customer Relations - 1-800-275-2273. Ask politely & firmly that you want to be transferred to Customer Relations. Tell them exactly what you stated in your post.
GOOD LUCK!
These are user-to-user forums where everyday folk (volunteers) post questions and offer answers (technical support) to each other.

Very Urgent: Deleting Batch from STO and Goos Issue reversal Using BAPI

Hi,
I want to delete outbound delivery for particular shipment number and this should be done using BAPI or a FM not using the tcode VL02N.
I wld be very grateful
Please List out the BAPI 's or FM that can be used for to perform these listed , with using Tcodes:
1) REVERSE BILLING DOCUMENT(VF11)
2) GOODS ISSUe REVERSAL (VL09N)
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
Its very urgent..
Thank you in advance....

1) REVERSE BILLING DOCUMENT(VF11)
BAPI_BILLINGDOC_CANCEL
2) GOODS ISSUe REVERSAL (VL09N)
BAPI_GOODSMVT_CANCEL
3) REMOVE DELIVERY FROM SHIPMENT (VT02N)
BAPI_SHIPMENT_CHANGE
4) DELETING DELIVERY(VL02N)
5) REMOVE BATCH FROM STO (ME22N)
BAPI_PO_CHANGE

Very Very Urgent Issue: Restricted Key Figure does not return any data

Hi all,
Please help me solving this urgent issue.
created customer exit variable on characterstics version and also
other customer exit variable on Value type.
I coded that in variable exit. Problem is when I include these in
restrickted keyfigure My query does not return me any data.
But if I remove from restrickted key firgure and put it as normal
charaterstics I see the variable is getting populated.
Also in RSRT the SQl generated when these are included in RKF is not
correct.
I debugged and know they are getting populated. As when included in RKF
I can also see the values of customer exit variables from information
tab.
I also know that there is data in cube for those restrictions.
I posted one OSS Notes regarding this urgent issue. But got no reply from SAP.
FYI: We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11
Thanks
SAP BW
**Please do not post the same question twice: Very Urgent Issue: Restricted Key Figure does not return any data

Hi,
Everyone out there this is very urgent. If someone can help me solving this problem.
We are using BEx 3.5 Browser SAP GUI 6.4 Patch 20 BW Patch 11.
I posted one oss notes also regarding this issue. But got no reply from SAP.
So, Please help me solving this issue.
Thanks
SAP BW

CATS Issue VERY Urgent..

HI ALL,
BiW PROD is placing CATS data for 2007 in to week 52 2006. Can advise why?
Please advise what would be the error.
Cheers,
Sri

Hi All,
We have a problem for 0CALWEEK in CATS.
FOR 0CALQUARTER
20061 means 1st quarter
20062 means 2ND quarter
20063 means 3RD quarter
20064 means 4TH quarter
FOR 0calweeK:
20061 means 1st WEEK
20062 means 2ND WEEK
20063 means 3RD WEEK
20064 means 4TH WEEK
0CALWEEK is giving problem IN CUBE.
It shows wrongly.
0CALQUARTER 0CAL WEEk
2007 1 2006 52 ( 52 week)
2007 1 2006 52
0CAL WEEk should show 2007 1 instead of 2006 52.
It should show :
0CALQUARTER 0CAL WEEk
2007 1 2007 1 (ist week in 2007)
2007 1 2007 1
we have a routine on 0CAL_week
=====
PROGRAM UPDATE_ROUTINE.
$$ begin of global - insert your declaration only below this line -
TABLES: ...
DATA: ...
data: employee_md like /bi0/memployee,
 employee_wa like /bi0/memployee,
 person_md like /bi0/mperson,
 PERSON_WA LIKE /BI0/MPERSON.
DATA: G_RECORD_NO LIKE SY-TABIX.
INCLUDE RS_BCT_HR_UPDATE_RULES_GENERAL.
INCLUDE RS_BCT_HR_PAPA_UPDATE_RULES.
$$ end of global - insert your declaration only before this line -
FORM compute_characteristics
TABLES MONITOR STRUCTURE RSMONITOR "user defined monitoring
USING COMM_STRUCTURE LIKE /BIC/CS0CATS_IS_1
 RECORD_NO LIKE SY-TABIX
 RECORD_ALL LIKE SY-TABIX
 SOURCE_SYSTEM LIKE RSUPDSIMULH-LOGSYS
CHANGING RESULT LIKE /BIC/VZCATST-CALWEEK
 RETURNCODE LIKE SY-SUBRC
 ABORT LIKE SY-SUBRC. "set ABORT <> 0 to cancel update
$$ begin of routine - insert your code only below this line -
fill the internal table "MONITOR", to make monitor entries
data: w_date type d.
data: w_date_check type d.
data: w_numberofdays type p decimals 2.
data: w_numberofweeks type i.
data: w_dayofweek type p.
data: w_first_day_of_sap_calendar type d value '19790101'.
data: check type i.
data: w_year(4) type c.
data: w_weekno(2) type c.
w_date_check = COMM_STRUCTURE-CALDAY.
w_date = w_date_check.
w_date+04(04) = '0101'. " beginning of the year
do.
w_dayofweek = ( ( w_date - w_first_day_of_sap_calendar ) mod 7 ) + 1.
if w_dayofweek = 7. " First sunday(7) of the Current year
exit.
endif.
add 01 to w_date+07(01).
enddo.
w_numberofdays = ( w_date_check - w_date ) + 1.
w_numberofweeks = ceil( w_numberofdays / 7 ).
w_year = w_date_check+0(4).
if w_numberofweeks = 53.
 w_numberofweeks = 1.
 w_year = w_date_check+0(4) + 1.
endif.
if w_numberofweeks = 0.
 w_numberofweeks = 52.
 w_year = w_date_check+0(4) - 1.
endif.
w_weekno = w_numberofweeks.
call function 'CONVERSION_EXIT_ALPHA_INPUT'
 exporting
 input = w_weekno
 importing
 output = w_weekno.
concatenate w_year w_weekno into RESULT.
result value of the routine
RESULT = .
if the returncode is not equal zero, the result will not be updated
RETURNCODE = 0.
if abort is not equal zero, the update process will be canceled
ABORT = 0.
$$ end of routine - insert your code only before this line -
ENDFORM.
========
This is giving problem from 2007 year only.
We need to check with FI or HR teams , Is there any configuration settings in R/3 side for 0Calweek?
This is production ISSUE. Help me on very Urgent BASIS!!
Thanks & Regards,
Sri.

Query Issue(Very Urgent)

Hi,
 I have issue with select statement to pull the records from two tables. Here I have two tables one is with Billing Document Items and Service Order Operations.
I have service order as unique field in both tables, When I execute select statement with one service order I got 10 records like
S Ord Oper Billing Document Items
Oper Repair Code Item Oper Repair Code
10 AD01 1 10 AD01
20 AD01 2 20 AD01
30 OT01 3 10 AD01
40 RE01 4 20 AD01
50 RP01 5 20 AD01
 6 20 AD01
 7 30 OT01
 8 40 RE01
 9 50 RP01
 10 50 RP01
 This are the records with same Service order number, and my select statement giving data like
O/P
Service Order = 60001212
OPER ITEM REPAIR TYPE
10 1 AD01
20 1 AD01
10 2 AD01
20 2 AD01
10 3 AD01
20 3 AD01
10 4 AD01
20 4 AD01
10 5 AD01
20 5 AD01
10 6 AD01
20 6 AD01
30 7 OT01
40 8 RE01
50 9 RP01
50 10 RP01
But I need output like this
Item Oper Rep Code
1 10 AD01
2 20 AD01
3 10 AD01
4 20 AD01
5 20 AD01
6 20 AD01
7 30 AD01
8 40 RE01
9 50 RP01
10 50 RP01
 Please give me the select statement which gives the above output. I need very urgent please....
Thanks
Robbie

hi robert,
The ouput u want is just a little away from the one u r actually getting. it is the two fields OPER and ITEM interchangeably..
U just have to use GROUP BY ITEM..........if u want the desired output with ITEM as first field.
<group-by-clause> → GROUP BY [<column-ref>,*]<column-ref>
if it helps please reward points.
thanks

Attachment issue --very urgent help required

Hello friends,
1)i have create page and deatal page . requirement is that we have to load required attachments in table region, if not loading required attachments exception will raise. this validation is working fine in create page.
2)same in detail page i loaded required attachments also excepiton is raising.
waht would be cause. i am very new to ADF technology.
very urgent to fix this issue. any one help me out.
Thanks,
vamshi.
Edited by: Krishna Vamshi on Jul 1, 2010 6:14 PM

Kirshna,
Unfortunately your question is very unclear.
Let me say that if you are asking about OA Framework, you should ask on the OA Framework forum, not here.
also excepiton is raising.It will help if you say what the exception is.
John

A very urgent deployment issue about DBAdapter

Hello All,
I have a very urgent deployment issue about DBAdapter.
That DBAdapter is connect to DB2 AS400 Database. I have a developing database (jdbc:as400://server01/TEST) and a production database (jdbc:as400://server01/PROD).
During developing, I used DBAdapter wizard to create it, and import some tables, and set the Adapter to use jabc/DB2DS as connection information for easily deployment later.
Then I deploy to Production. I configured Data-source.xml and oc4j-ra.xml rightly; I set DB connection point to production database. But the DBAdapter still write into developing Database.
I checked the DBAdapter, the imported tables are something like this, TEST.table1, TEST.table2. And there are a lot "TEST" located in DB2Writer_toplink_mapping.xml, DB2Writer.xml, TEST.schema, DB2Writer.table1.ClassDescriptor.xml.
This TEST is refrer to the TEST in connect String jdbc:as400://server01/TEST.
I think this might be the reason cause the problem. As to production database, "TEST" should replaced by "PROD". If I changed it manually, I have to change every time when switch between TEST and PROD. And I also don't know if it is safe to do it? (I tried, and bring some toplink mapping problem)
By the way, for Oracle Database, because we use 2 instances for testing and production with same schema name, and do not have this issue.
Anyone could help and many thanks.
Kerr
Message was edited by:
Kerr

Hi Kerr,
The idea is to set up all connections in the BPEL or ESB services with logical names, e.g. typically of the form eis/DB/MyFinancialSystem or eis/DB/MyLogisticsSystem. This way, you do not have to modify code when deploying it onto different environments that serve different purposes.
When moving your services through their lifecyle, on every environment you deploy these to you will have the same logical connections configured on each instance, e.g. for DEV, QA, SIT, UAT and PROD. Only, in case of QA the actual physical connection is configured to point to the QA instance of the systems that your services interact with whereas in case of UAT it points to the UAT instance of the same system.
Maybe your problem is caused by connecting as user "SomeUser" when running the DB Adapter wizard during development and actually selecting objects from a different schema than you used to connect with, e.g. "Test" in your case.
Hth,
Sjoerd

Issues related implimatation very urgent

Similar Messages

Maybe you are looking for