Issues using sap.m.SelectDialog (fixed height of 2000px, SAPUI5 1.20.4)

Hi there
I'm using SAPUI5 1.20.4 on SAP AS Java.
I have a sap.ui.commons.Dialog modal popup. Within this popup I can open another popup, but this time it is a sap.m.SelectDialog.
The animation when opening the SelectDialog is fine (fade in, zoom), but as soon as it finished rendering, there is the close button at the bottom and the area above is completely white.
By investigating this issue I found out, that the <section> tag below the <header> gets a fixed height of 2000px (inline style). The (generated) ID is __dialog4_dialog_cont.
I'm using Chrome with a screen resolution of 800x600 only.
Do you have any suggestions?
Regards
Tobias

I have some more information.
When initializing the SelectDialog, a variable is NaN.
When opening the SelectDialog it looks like this:
It still looks fine when "return this" gets executed. There must be some post-rendering which takes place after the SelectDialog was rendered.
I don't know exactly where it happens, but later it looks this way:
If you need additional information, please let me know.
Regards
Tobias

Similar Messages

Export issue using the shooting script fix

I've followed the directions given at http://forums.adobe.com/message/4369249#4369249 for switching between formats (r.e. showing shooting info and not). The issue I have now is on export. When I export to pdf from a file saved under the film template it exports the shooting information--causing the lines in the pdf to be obscured by the camera directions. This leaves me with a useless script as no actor/actress is able to read it. I tried to export as txt as a work around but the formating comes out skewed. I need a way to export which will leave the formatting correct and will leave off the shooting info, so it can be used as a readable script. Any suggestions?

Hi,
We are aware of this issue and it will be fixed in our next update.
Meanwhile workaround is:
1. Export you script to astx format
2. Import this astx file into story
3. Export this script to pdf.
Thanks
Rohit
Adobe Story Team

User mapping issue using SAP net weaver developer studio

Dear All,
I am getting below error when updating user mapping in SAP Enterprise Portal. I was able to update the data through SAP portal but not through the below code.
Code:
userMapData.setSystemAlias(“WebEx”);
mappingData.put(UmeConstants.USERNAME, "user id");
                                                               mappingData.put(UmeConstants.PASSWORD, "pasword");
if (!userMapData.setMappingData(newUser, mappingData,logger)) {
errorMessage = new ErrorMessage("Set user maaping data for + " + newUser.getDisplayName() + " failed.", "ApolloUMECreateUser.setUserMappingData()");
public boolean setMappingData(IUser iUser, Map logonData, UmeLog logger) {
        //logonData needs to be able to be null to clear the user mapping!
        if (iUser != null) {
            try {
                  IUserMappingData mappingData = iUserMapping.getUserMappingData(systemAlias, iUser, logonData);
                //IUserMappingService iums = (IUserMappingService)PortalRuntime.getRuntimeResources().getService(IUserMappingService.KEY);
                //IUserMappingData mappingData = iums.getMappingData (systemAlias, iUser);
                mappingData.storeLogonData(logonData);
                        return true;
            catch (IOException ioe) {
return false;
            catch (Exception e) {
                        return false;
        return false;
Error:
#1.5#00155D007802007D0000417100000B480004F636722D1228#1396613610296#com.sap.security.core.umap.imp.UserMappingDataImp#ibm.com/ibm.com.tivoli.im.umeagent#com.sap.security.core.umap.imp.UserMappingDataImp.saveLogonDataInternal(Map, boolean)#Guest#0##n/a##88b1fdb2bbf211e3a6ac00000032f136#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Java###Cannot save logon data for principal {0} because there is no mapped backend user ID in the logon data map to save.#1#"user id, password" (unique ID: "USER.PRIVATE_DATASOURCE.un:aujastest31")#
#1.5#00155D00780200740000411600000B480004F636722D12D8#1396613610296#System.err#ibm.com/ibm.com.tivoli.im.****umeagent#System.err#Guest#0##n/a##88cc4ee9bbf211e3b0a300000032f136#SAPEngine_Application_Thread[impl:3]_33##0#0#Error##Plain###Apr 4, 2014 5:43:30 PM com.ibm.tim.agents.UmeAgent [SAPEngine_Application_Thread[impl:3]_33] Info: Created the Writer
#1.5#00155D007802007D0000417200000B480004F636722D18DA#1396613610296#com.sap.security.core.umap.imp.UserMappingDataImp#ibm.com/ibm.com.tivoli.im.umeagent#com.sap.security.core.umap.imp.UserMappingDataImp#Guest#0##n/a##88b1fdb2bbf211e3a6ac00000032f136#SAPEngine_Application_Thread[impl:3]_24##0#0#Error##Java###storeLogonData(Map)
[EXCEPTION]
{0}#1#com.sap.security.api.UMException: Mapped backend user ID not specified.
      at com.sap.security.core.umap.imp.UserMappingDataImp.saveLogonDataInternal(UserMappingDataImp.java:280)
      at com.sap.security.core.umap.imp.UserMappingDataImp.saveLogonData(UserMappingDataImp.java:251)
      at com.sap.security.core.umap.imp.UserMappingDataImp.storeLogonData(UserMappingDataImp.java:223)
      at com.ibm.tivoli.integration.im.agents.umeagent.sap.usermapping.UserMapData.setMappingData(UserMapData.java:106)
      at com.ibm.tivoli.integration.im.agents.umeagent.sap.UMECreateUser.setUserMappingData(UMECreateUser.java:381)
      at com.ibm.tivoli.integration.im.agents.umeagent.sap.UMECreateUser.UMECreateSAPUser(UMECreateUser.java:118)
      at com.ibm.tim.agents.UmeAgent.UMEProcessAddRequest(UmeAgent.java:207)
      at com.ibm.tim.agents.UmeAgent.processRequest(UmeAgent.java:134)
      at com.ibm.tim.agents.UmeAgent.doPost(UmeAgent.java:89)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
      at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
      at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
      at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1060)
      at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
      at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
      at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
      at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
      at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
      at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
      at java.security.AccessController.doPrivileged(Native Method)
      at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104)
      at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176)

Thanks Rodrigo for you reply.
In Data Base user is exist and manually user mapping is working only through code i am getting error. Using code user is creating but mapping is not happening. I am sending ep6User user as iUser please find requested code.
Please suggest Thanks in advanced!!!
public UmeUser processRequest(com.ibm.dsml2.parser.AddRequest addRequest) {
        UmeUser ep6User = null;
        try {
            Enumeration enumAddRequestAttr = addRequest.enumerateAttr();
            Properties userAttributes = new Properties();
            while (enumAddRequestAttr.hasMoreElements()) {
                com.ibm.dsml2.parser.Attr attr = (com.ibm.dsml2.parser.Attr) enumAddRequestAttr.nextElement();
               if (attr.getValueCount() == 1) {
                    userAttributes.put(attr.getName(), getAttributeValue(attr));
                else {
                    List list = new ArrayList(attr.getValueCount());
                    for (int i = 0; i < attr.getValueCount(); i++) {
                        list.add(getAttributeValue(attr, i));
                    userAttributes.put(attr.getName(), list);
            ep6User = new UmeUser(userAttributes, logger);
        catch (Exception e) {
            logger.log(this.getClass().getName(), e);
        return ep6User;

When I try to use my TWC App on my iPad2, the sound is about 15 seconds off from the picture. This only happening on my iPad, not my phone or my computer. TWC said it's an Apple issue. Is there a fix?

When I try to use my TWC App on my iPad2, the sound is about 15 seconds off from the picture. This only happening on my iPad, not my phone or my computer. TWC said it's an Apple issue. Is there a fix?

Hello Corkymom4,
Thanks for using Apple Support Communities.
Please follow the troubleshooting steps in the article below to resolve issues with apps downloaded from the App Store.
iOS: An app you installed unexpectedly quits, stops responding, or won’t open
http://support.apple.com/kb/TS1702
Take care,
Alex H.

An issue using the COM components supplied with SAP GUI 6.2 or 6.4

We are having an issue using the COM components supplied with SAP GUI 6.2 or 6.4. We used to have SAP 4.6c and now we have 5.0. When we were on 4.6c, we used these COM components to logon and execute RFC calls and we had much success. Now that we are on 5.0, we cant seem to instance any SAP functions that have something to do with SAP Workflow. We have experienced this problem when using VB6 or .NET, but our existing code that always worked is in VB 6.0.
SAP Components used:
o     SAP Logon Control
o     SAP Function Control
o     Librfc32.dll
o     Other supporting C DLLs and/or COM object supplied with the SAP GUI installation.
For example, if we want to call the RFC ARCHIV_CONNECTION_INSERT, this code fails in VB6 when the Set objworkflow = objFuncCtrl.Add(strFunction) line of code executes. Instead of returning an instance of the object ARCHIV_CONNECTION_INSERT function, no object is created. In 6.2, SAP raises no errors, but the object we are trying to create is still Nothing. If we use 6.4, SAP raises an error SAP data type not supported via a message box and then the object is still = Nothing. Interestingly enough, the 6.2 GUI COM controls dont display the error dialog. The message box that is shown comes from the SAP Function COM Object "SAP.Functions" (wdtfuncs.ocx).
Now, what is interesting is if we use the same code to call a standard function or custom function that doesnt have anything to do with SAP Workflow, then the code works fine. Again, all of our code used to work just fine on an SAP 4.6 system.
Here is the code that fails:
    'SAP Logon control - object for creating connections to an SAP system
    Dim objSAPLogonCtrl As Object
    'SAP connection object
    Dim objConnection As Object
    'Object that will represent the SAP function called
    Dim objSAP As Object
    'SAP function control object - object factory for creating other SAP function objects
    Dim objFuncCtrl As Object
    'Create instance of an SAP logon conrol
    Set objSAPLogonCtrl = CreateObject("SAP.Logoncontrol.1")
    'Create a connection object
    Set objConnection = objSAPLogonCtrl.NewConnection
    'Define connecion parameters
    objConnection.ApplicationServer = "sapvm"
    objConnection.SystemNumber = "00"
    objConnection.Client = "800"
    objConnection.User = "iissap"
    objConnection.Password = "tstadm"
    objConnection.Language = "E"
    objConnection.TraceLevel = 10
    'call the logon method of the connection object
    If objConnection.Logon(0, True) = False Then
        MsgBox Error
        Exit Sub
    End If
    'Create an instance of the SAP Function control object
    Set objFuncCtrl = CreateObject("SAP.Functions")
    'Set the function control connection object
    Set objFuncCtrl.Connection = objConnection
    'Function name to be generated and called
    Dim strFunction As String
    strFunction = <b>"ARCHIV_PROCESS_RFCINPUT"</b>
    'Create an instance of the function defined in strFunction
    Set objworkflow = objFuncCtrl.Add(strFunction)
    If objworkflow Is Nothing Then
        MsgBox "Could not create object " & strFunction
    Else
        MsgBox strFunction & " object created."
    End If
If anyone has seen anything like this or has any ideas, please help!
Mike and Hameed
<b></b>

Hi,
documentation on the Scripting API is available at ftp://ftp.sap.com/pub/sapgui/win/640/scripting/docs/
This API is a replacement of the existing, obsolete COM interfaces.
Best regards,
Christian

HT1933 I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found. I have used the gift card previously with no issue. How do I fix

I bought six songs using my itunes gift card in February but I cannot play the songs or downlaod them to my ipod because I get an error saying the original file could not be found. I have used the gift card previously with no issue. How do I fix it?

Have you moved or deleted those tracks on your computer (the gift card has got nothing to do with it) ?
You might be able to re-download them via the Purchased link under Quick Links on the right-hand side of the iTunes store home page on your computer's iTunes (re-downloading isn't possible in all countries) - if those songs appear there then delete the entries from your iTunes library (where you are clicking on them to play them and gettinf the 'original file' error), and they should then get a cloud symbol against them for re-downloading.
If they don't appear in that link then have you got them on, for example, an external drive ?

Smartform font spacing Issue when using SAP printer name

Hi Friends,
I am facing some spacing issues when printing a form using SAP printer name. If I use LOCL then the output comes perfectly but when I use the SAP printer name the space between characters are getting widened and so the alignment of each column goes wayward. I suspect it could be due to the device type but not sure which seeting controls this. There is a similar problem in the logo as well. When using LOCL the logo comes out good but when using the printer name the quality is not good and becomes pixelised. Have any of you faced similar issues? Can you provide some guidance or pointers for the solution.
Device type of LOCL : ZSAPWIN
Device type of SAP printer name : ZHPLJ5
CPI is defined in smartform as 10.
Please let me know if you need more information.
Thanks,
Praveen

Hi,
This problem occurs because the printer driver for both the printers are different,
I suggest you use Local printer only or configure any other printer with printer diver in SAP as SAPWIN.
Regards,
Bharat.

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Using Acrobat Pro X on windows 7. The replace pages feature does not work. Is this a known issue? Is there a fix?

Hi Todd,
I haven't heard other reports of this (though there was an issue quite some time ago where deleting pages on this combination of Acrobat/OS was challenging).
Can you please tell me what happens when you try to replace pages? Do you get an error message? Are you able to manipulate pages otherwise (delete, extract, and so on)? Is this issue unique to one file, or does it happen with all PDF files?
I look forward to hearing back from you.
Best,
Sara

SAP System Log on issue using Crystal Reports:

Hi All,
I have installed Crystal reports, Business Explorer and Business Objects XI Integration. But when I tried to create a new report using SAP Table, Cluster or Functional, I couldn't able to select SAP System since it shows SAP System Log on selection was blank.
Note: I have undergone the following trials:
         1) All the trials are done after connecting to the Internal Vpn.
         2) Re-installed the Crystal reports, Business Explorer and Business Objects XI. But result was the same.
         3) Compared all the setting parameters with another System which works fine.
         4) Only difference seems to be that I am using Win Vista and other one is Win XP OS.
         5) Tried in the net for Win Vista specific patches or software to run the crystal report but couldn't helped.
Did any one come across similar experience or is there any idea why it could be? Thank you in advance.
Best Regards,
Sujith
Edited by: Sujith Kumar Naithalath on Jun 22, 2009 8:29 PM
Edited by: Sujith Kumar Naithalath on Jun 22, 2009 8:30 PM

Hi Don,
Thank you very much for your reply. I was wondering from where we could download XI R2 ( 11.5 ) SP 2. I have tried downloading Software Forces .rpt Inspector 3 Professional suite (for CR XI R2) . But this doesn't seems to be the right one. Also I have cheked in sdn Crysal Report 2008 download (https://websmp230.sap-ag.de/sap(bD1lbiZjPTAwMQ==)/bc/bsp/spn/bobj_download/main.htm ). But no luck. Thanks again.
Best Regards,
Sujith.

Validate xslt against JDK5 so we can remove the 'Use SAP XML Toolkit' flag

We are working on PI7.1 and have hit an issue with an XSLT mapping. We were getting an error when testing that said:
TransformerException during XSLT processing:
javax.xml.transform.TransformerException: com.sun.org.apache.xalan.internal.xsltc.TransletException: com.sun.org.apache.xalan.internal.xsltc.TransletException: java.io.FileNotFoundException
We found a few threads on SDN pointing us to using the 'Use SAP XML Toolkit' flag, which we'd not even noticed before. Ticking this flag did get us around the problem. Further investigation suggested to us, however, that this flag will not be available in future releases, so I guess our best solution would be to try and resolve the issues in our mapping against the current version of java (JDK5). When we use other tools such as XMLSPY they do not detect a problem with the XSLT. Can anyone point me to a tool that would enable us to validate our XSLT file against JDK5, which will provide us with error messages that will enable us to fix the error and therefore remove the 'Use SAP XML Toolkit' flag?
thanks,
Malcolm.

> Can anyone point me to a tool that would enable us to validate our XSLT file against JDK5, which will provide us with error messages that will enable us to fix the error and therefore remove the 'Use SAP XML Toolkit' flag?
I am sorry to have to say that even inside SAP nobody can answer this question.
In principle it will work when it is pure XSLT 1.1 but some commands from XSLT 2.0 might work also.

Help with Video Performance Issues using Flash

Asking on behalf of a customer who has been unable to get any answers so far - are you able to help?
Background:
We have a port of our Game Development Kit which allows us to recompile all our games using Crossbridge (http://adobe-flash.github.io/crossbridge/) into SWF without any code modifications.
Overview:
Our framework is using OpenGL for rendering and we have successfully ported it along with the audio and video to run in Flash.
We are experiencing performance issues using Video. We cannot use image sequence as some of the video animations are too long and would increase the download to an unacceptable size. Assets vary between 256x256 - 1024x1024 videos.

Here's the rest of the story. Let me know if you can see any resolution, and I will connect him to the forums. Thank you.
Current Video Solution:
We create an instance of NetConnection, NetStream, and Video according to most samples out there, and invoke draw to rasterize the Video DisplayObject into a BitmapData instance.
The BitmapData instance has a fixed color component layout which is not compatible with Stage3D texture and is therefore has to be reformatted before uploaded to Stage3D Texture (See Code Listing below).
Our Problems:
Performance issues with RGBA conversion (either using copyChannel or manually reformatting is not fast enough) natively in as3; this required for stage3d texture.Copying each channel individual using bitmapdata.Copychannel seems faster, but not significantly faster.
Cannot detect when video frame has been updated, therefore we may copy pixels that are not needed in enterframe (processpixel).
Looping video, our current solution uses the NET_STATUS event Buffer empty; Is there a better way to loop videos than checking buffer and seeking to 0.
Stepping video, loading FLV or MP4 side by side assets from HTTP or embedded does not support stepping? Is there another way?
ActionScript Code Listing:
video_nc = new NetConnection();
video_nc.addEventListener(NetStatusEvent.NET_STATUS , onConnect);
video_nc.addEventListener(AsyncErrorEvent.ASYNC_ERROR , trace);
video_nc.connect(null);
// OnConnect Event:
this.ns = new NetStream(e.target as NetConnection);
eventclient = new Object();
eventclient.onMetaData = onMetaData;
this.ns.client = eventclient;
ns.play(flvfile);
ns.pause();
//onMetaData event:
this.width = infoObject.width;
this.height = infoObject.height;
this.textureWidth = NextPowerOfTwo(this.width);
this.textureHeight = NextPowerOfTwo(this.height);
cliprect = new Rectangle(0, 0, this.width ,this.height);
cliprect.x = 0;
cliprect.y = 0;
cliprect.width = this.textureWidth;
cliprect.height = this.textureHeight;
totalFrames = infoObject.duration * infoObject.fps;
this.hasAlpha = true;
if(infoObject.videocodecid == 5)
this.hasAlpha = true;
this.bitmapData = new BitmapData(this.textureWidth, this.textureHeight, hasAlpha, 0xff000000);
this.video = new Video(this.width, this.height);
this.video.attachNetStream(ns);
this.video.addEventListener(Event.ENTER_FRAME, processPixels);
// processPixel method:
BitmapData.draw(video);
GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
var fmt:uint = GLAPI.GL_ARGB;
// converting pixels using copychannel or loop through pixels
GLAPI.instance.glBindTexture(GLAPI.GL_TEXTURE_2D,this.textureId);
GLAPI.instance.glTexImage2D(GLAPI.GL_TEXTURE_2D, 0, fmt, this.textureWidth, this.textureHeight, 0,fmt, GLAPI.GL_UNSIGNED_BYTE, 0, convBitmapData.getPixels(cliprect));

Access Standard property(eg Fixed Height) of an iview in code

Hi ,
I have downloaded the standard URL iview's par(com.sap.portal.httpconnectivity.urliviews.par). I want to access the property 'Fixed Height' in the code. The component profile of the par doesnt contain the above attribute(and many other standard attributes which we get to see in the property editor of the iView). Can somebody please help me in this regard.
Regards,
Prathamesh

Hi,
I would suggest you to use the PcmConstants.ASPECT_ADMINISTRATION for Constants.REQUESTED_ASPECT in environment.
Hashtable env = new Hashtable();
env.put(Context.INITIAL_CONTEXT_FACTORY, IPcdContext.PCD_INITIAL_CONTEXT_FACTORY);
env.put(Constants.REQUESTED_ASPECT, PcmConstants.ASPECT_ADMINISTRATION);
env.put(Context.SECURITY_PRINCIPAL, request.getUser());
InitialContext iCtx = null;
String roleID = "pcd:portal_content/DanielContent/DanRole";
try{
    iCtx = new InitialContext(env);
    PcmAdminBase adminBase =
            (PcmAdminBase) iCtx.lookup(roleID);
    IPcdAttribute attribute = (IPcdAttribute) adminBase.getPcdContext().getAttributes("").get("com.sap.portal.iview.Height");
String height = attribute.get().toString();
Greetings,
Praveen Gudapati

How to set up fixed height in ADF layout component

I try to create a page by having my main content at the center of page within a box using a fixed height. The idea is when the content is too long, a vertical scrollbar should show up for that box instead of stretching that box. I tried to use trh:tableLayout and set height attribute for trh:cellFormat component. However, instead of showing a vertical scrollbar, it just stretches table cell. Does anyone have a solution to this issue? Thanks.

Thanks for your fast reply. Yes, I already tried layout="vertical" which is not help. I am using JDeveloper 11.1.1.2.0. Actually what I want to do is I will display a block of information in a box area at the center of screen. If the information become too big for that box, I want a scrollbar to show up for that box instead of stretching that box to fit the content.

Fixed height of text iView

Hi all,
i want to get a text iView into my page with a fixed height, and if the text increases that limit a vertical scroll bar should apear and not the horizontal scroll bar.
i am trying to use <iframe> tag in the jsp and call the html page in that as a src. is there any other way to do it?
thanks,
Harika.

Hi Harika
go thru the following url then u will get some idea on this problem.
Regards
sunil
<a href="https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=fixedheightoftextviewinthejsp&adv=false">https://www.sdn.sap.com/irj/sdn/advancedsearch?cat=sdn_library&query=fixedheightoftextviewinthejsp&adv=false</a>
Regards
sunil

'Change your password' error when log to designer using SAP Authentication

Hi All,
Here is the scenario. I want to create a universe on BW.
1. I try to log into designer using SAP authentication (by choosing SAP as the authentication option)
2. In the system name its the name of the CMS
3. The username and password that I entered were for my SAP system. (Yes, my SAP role is already present in CMC)
4. After I entered, I got a message saying ' You must change your password to continue. If you do not change your password, your account might get disabled'.
5. I am prompted with dialogue box to change my password.
6. After I enter a new password (fairly complicated), it gives an error Failed to change password/ Details : [repo_proxy 15]. Sessionfacade:: changePassword - User password has not been updated (Incorrect password).
I know that's not the case because I am able to log into SAP GUI and into CMC using my SAP credentials.
Any advice please ? Why is this happening in designer ?

Hi,
Your issue may be fixed in FP1.8 with the following reference:
ADAPT01229385
Description:
+If an Enterprise alias is created for a SAP user accounts in the Central Management Console (CMC), and set to change their+
+passwords at the next log on, the SAP users may be unable to log on to applications with their SAP credentials.+
+This problem happens even after the Enterprise alias is removed from the SAP user accounts in the CMC.+
I hope this helps.
regards,
Henry

Issues using sap.m.SelectDialog (fixed height of 2000px, SAPUI5 1.20.4)

Similar Messages

Maybe you are looking for