Issues with spot not being saved on page

''locking as a dupe of https://support.mozilla.org/en-US/questions/976793''
I have asked this question in another category and thought a change will hopefully get it answered.
For example I save and quite on a webpage at a specific spot an article and lets say said article is fairly long, well I'm scrolled half way down when I last closed it when reopened however its has either scrolled up all the way to the top of the page or is scrolled up to close to the top. I have no idea what this is or where the problem would be located. I have already used the troubleshoot reset Firefox problem still persists. Did not have this issued on Firefox 24.

Actually, they all go into one incredibly long list, so one of the two posts is likely to be locked, either this one or:
[https://support.mozilla.org/en-US/questions/976793 I'm having issues for firefox 25 does not save spot on a webpage.]

Similar Messages

When is the next ios update and will it fix/address the issue with photos not being shown in chronilogical order?

when is the next ios update and will it fix/address the issue with photos not being shown in chronological order?

All of us here are users just like you. We have no inside info of when Apple products or operating system updates/upgrades will be released. The next iOS may not even change the issue you have.
 Cheers, Tom

IPhone 4 - the issues photos taken not being saved, photos are deleting by themselves, recent calls not appering, msg app keeps closing, what's wrong with my iPhone?

My iPhone 4 started playing up a few days ago.
First it deleted 250 photos ( of my sons birth) then next day it deleted another 50.
Now it won't let me take any photos receive any photo msg's and save photos.
Aswell it has started to get out of msg app as you hit send for the msg. And it won't show any calls made or received in the last few days?
How do I fix it??????

Basic troubleshooting from the User's Guide is reset, restart, restore (first from backup then as new). Try each of these in order until the issue is resolved.

Issues with thunderbolt not being detected on initial start up

I understand that when running windows boot camp for your thunderbolt display you have to either reboot or start up for it to be detected. However, I shut my machine down every night and when I come back in the next day and start up, the thunderbolt is never detected. I reinstalled the windows support software and this seemed to fix it but only for a short period. Any suggestions?

kirstyfiona wrote:
I understand that when running windows boot camp for your thunderbolt display you have to either reboot or start up for it to be detected.
It should not be necessary for plug/play devices.
However, I shut my machine down every night and when I come back in the next day and start up, the thunderbolt is never detected.
Do you boot with the TB monitor connected?
I reinstalled the windows support software and this seemed to fix it but only for a short period. Any suggestions?
Do you have Windows Automatic Updates set up, which may be updating your drivers, without you knowing what is going on? Check Windows Update history.

Has anyone had an issues with certain not being able to SMS certain numbers after upgrading to IOS6.1.3

I upgraded my software on iphone 4s on Tuesday and since then I can no longer send an SMS to my parents (how live in Spain and therefore its a Spanish mobile). The international dialing code is correct, and I am on a contract therefore no isssues with credit.
When i try to send the SMS it keep saying delivery failed. Been trying for 3 days. And also when my parents call me from there mobile numbers it now coming up as a blocked unknown caller rather than the contact name as it did pre-upgrate.
Would really appreciate if anyone has an ideas to fix this as hate being cut off from my familly.

Already done this and they haven't found any problems or made any changes. All the problems started following the upgrade to 6.1.3

Issue with groups not being able to run applications on remote server

Hi all..
I've got an older PowerMac G5 running 10.5.8 that gets the OpenDirectory accounts from our MacMini server running 10.6.5. I've got a group setup called "Children" that my kids belong to and which is managed care of the Workgroup manager. However, I find that some of my apps can't be run by any of the kids if they're in subdirectories within /Applications. They receive a "The operation could not be completed because you do not have enough access privileges." I've tried playing around with various settings and finally decided to not restrict access to any applications but the problems remain.. Some apps can be run just fine but others are out of reach.. Any ideas on how to fix this or perhaps diagnose it?
Thx!

Hi
Another approach is to create a folder in the local Administrators Home folder. Name it Applications. Place the applications you want to restrict access to into that folder. If you have ARD you could use the mkdir and mv commands to achieve this. In some situations I find this an easier way of managing applications rather than what's available in WorkGroup Manager. For me it only tends to work with Apple's built in applications effectively. Anything else is liable to cause a problem along the lines you mention. Some 3rd-Party applications can have dependencies that may be sited in different locations. The trick is tracking down them.
Tony

I've been editing images with ease for a long time but now the changes are not being saved.

I've been editing images with ease for a long time but now the changes are not being saved.
Also, it is not liking me adding a large ammount of images in one go?

Remember: we cannot see your machine. There are 9 different versions of iPhoto and they run on 8 different versions of the Operating System. The tricks and tips for dealing with issues vary depending on the version of iPhoto and the version of the OS. So to get help you need to give as much information as you can. Basic things like :
- What version of iPhoto.
- What version of the Operating System.
- Details. As full a description of the problem as you can. For instance: 'iPhoto won't export' is best explained by describing how you are trying to export, and so on.
- History: Is this going on long? Has anything been installed or deleted?
- Are there error messages?
- What steps have you tried already to solve the issue.
- Anything unusual about your set up? Or how you use iPhoto?
Anything else you can think of that might help someone understand the problem you have.

Anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find my provider. I swapped SIMs with another iPhone 4 on ios 4 to confirm device problem.

Has anyone else had issues with phone network being unavailable on iPhone 4 since updating to iOS 5.0.1? My iPhone 4 is continually searching for a network and does not find AT&T, my provider. I swapped SIM cards with another iPhone 4 running ios 4 and established this is a device problem, not a SIM card problem.

Does the device get any signal?
Sounds like the device may have had a hardware failure. If it is out of warranty, the only option is the Out of Warranty replacement.
AppleCare is only an option if it is still under the original warranty.

I am having a persistent problems with the application tabs i pin not being saved. sometimes, they are not present when i re-open the browser.

i have 3 sites i have repeatedly saved as an app tab. on the rare occasions i exit my browser, my pinned tabs are missing. furthermore, when i attempt to "restore previous session", the tabs that were open may be restored but the pinned tabs are ALWAYS missing and never restored.

''app-tabs not being saved...'''
Be sure you close Firefox properly File (or "Firefox") > Exit not with the "x" in the upper right corner.
Just because app-tabs will carry over from one session to another does not mean that they are fool proof or should be relied on., I keep mine in a bookmarks folder and replenish app-tabs from there when needed. It is also nice to have the "Tab Handler" to work with tabs and change all or a selection of tabs to app-tabs at once.

My history is not being saved. Yes, in preferences, I have selected save history [90 days]. I believe this happened with the recent new update?

Running firefox 3.6.11 on a Mac OS X, 10.5.8. My history is not being saved [or displayed]. Within preferences [privacy] I have selected to remember history for 90 days. No, private browsing is Not selected. When choosing "show all history" under toolbar, my history is empty. Does anyone know what's happening? This just began happening within the last week or so--which does coincide with a recent [automatic] firefox update.

This can be a problem with the file places.sqlite that stores the bookmarks and the history.
* http://kb.mozillazine.org/Bookmarks_history_and_toolbar_buttons_not_working_-_Firefox

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I'm often having issues with clients not seeing or being able to open attachments, font formatting changes (on the pc end) and the inability to use HTML signatures to promote our company brand.

I imagine your clients must be using Outlook, which is seriously broken when it comes to e-mail standards, especially HTML e-mail. You can work around the issues with Outlook by only sending plain-text e-mails and making sure that, in the Edit -> Attachments menu, the last two options are checked. Unfortunately, that means that HTML signatures are out.
If you need something with a fancy layout, either attach a PDF file to the e-mail or include a link to a website in the e-mail.

WRT160Nv3 port forwarding settings not being saved

Hello there.
I am using a WRT160Nv3 router and am having trouble getting port forwarding to work.
Specifically, my settings are not being saved properly.
I am trying to set up a server to run for Minecraft, and I have eliminated all issues save port forwarding.
I open up the router's settings by going to 10.10.10.1 in my browser. I go to "Single Port Forwarding." I then choose a blank spot on the left and label the application (in this case, Minecraft), then I type in the ports I want to forward (minecraft uses 25565). I check the box "Enabled." Then I go down to the "Save Settings" button below and click it.
This brings me to a mostly black screen with a white box in it, and big black letters saying "Settings are successful" and a button to click, labeled "continue." I click this, and it returns me to the last page I was on (Single Port Forwarding).
But here is the problem- that page is EXACTLY the same as when I began. None of what I typed in or changed is actually saved on the screen o_0
This definitely baffles me, as it seems as if I did nothing in first place. I use the program whose port I wanted to forward and it still doesn't work, the error messages being the same as always.
So what is the matter here? Why aren't my settings being saved properly? Do I need to get a new router-this one is only a year old...
Any ideas?
PS- I also tried to do port range forwarding, and the same thing happens there too.

hi there and welcome to the forums!
try to clear your browsers' cache..and delete cookies then try again

FTP settings not being saved

I moved my Dreamweaver 8 to a Win 7 machine and after installing the 8.02 update the FTP settings, user and password, are not being saved. I tried the regedit alterations with no joy. Any thing new for Win 7?
Kirk

Hi N6SXR,
As you correctly guessed, Nancy is our expert contributor on Adobe forums and not an Adobe employee. We are glad that you managed to sort your issue. Thank you for sharing the information with other users that will potentially benefit from your post.
The versions supported by Adobe can be found at http://www.adobe.com/support/programs/policies/supported.html. While it is not our intention to force users to upgrade their software, it is also true that there has been a sea change in the way people design web pages. The team has been relentlessly focused on creating a software that meets the current demands of web designers through periodic updates that provide users with bug fixes and new features.
The Dreamweaver standalone product is available for 30$ monthly subscription. Do have a look at the offers available http://www.adobe.com/ca/products/dreamweaver/buying-guide.html when you have the time.
Thanks,
Preran

Recently, my passwords on many websites are not being saved, forcing me to log in every 15 minutes or so. Is anyone else experiencing this? I am wondering if it is a result of a "bad" update?

For the past few weeks, I have noticed that passwords on many different websites are not being saved. I literally have to log back into each page every 15 minutes or so. Is this the result of a bad software update? Have an appointment at the Genius Bar tomorrow but if this can be resolved without going in, it would be preferred.

For what it's worth, you posted this in 2011, and here in 2014 I am still having this same issue. Over the last two days, I have had to unlock my apple account 8 times. I didn't get any new devices. I haven't initiated a password reset. I didn't forget my password. I set up two factor authentication and have been able to do the unlocking with the key and using a code sent to one of my devices.
That all works.
It's this having to unlock my account every time I go to use any of my devices. And I have many: iMac, iPad, iPad2, iPad mini, iPhone 5s, iPod touch (daughter), and my old iPhone 4 being used as an ipod touch now. They are all synced, and all was working just fine.
I have initiated an incident with Apple (again) but I know they are just going to suggest I change my Apple ID. It's a simple one, and one that I am sure others think is theirs. I don't want to change it. I shouldn't have to. Apple should be able to tell me who is trying to use it, or at least from where.
Thanks for listening,
Melissa

HT4075 I tried the steps mentioned above but the changes are not being saved.

I am not able to edit or merge PDF files. I followed the steps mentioned in the Mac support community but the changes are not being saved. Any solution to this?

The link you posted gives be a 404 not found message.
The reason you're getting the repeat is because your site name is wilgenroos.nl and the first page of your site is wilgenroos.
The standard URL for domain names that are forwarded with the CNAME method is:
http://www.domain_name.com/site_name/page_name.html.
You can change the site and page names in iWeb to give you something more informative about the site and page.
If you're publishing to a 3rd party server and want to get rid of the site name in the url and only have
http://www.domian_name.com/page_name.html
do the following:
publish the site to a folder on your hard drive (already done)
use Cyberduck to upload just the contents of your site folder to the root folder of your account on the server.
You should delete the old site folder and files that are currently there beforehand.

Issues with spot not being saved on page

Similar Messages

Maybe you are looking for