IT 0105 subtype 0001. Assign one System user to more than one person?

Hello, Gurus!
We are maitaining Hr master data (infotype 0105 - Communication, subtype 0001 - System User name). We have two person: person A and person B. Person A have communication with system user C. When we communicate person B with same system user C, we gettin error:
"ID/number already used for person A".
The time constraint is set to 3 (Record may include gaps, can exist more than once"
Is it possible to assign one system user more than one person?
This condition is checked by FM CHECK_USRID. We assume, what the result of this checking can be changed from "Error" to "Alert", if we will change one record in table T77S0:
Current value:
GRPID=MAIL
SEMID=SAPSY
GSVAL=0001
Table record after modification:
GRPID=MAIL
SEMID=SAPSY
GSVAL=0002 (or any digital value, which is iffer from "0001"
Should we expect negative consequences of similar modification?
Please, advice.

Thanks for explanation.
But there is a little moment, that I can not understand ((
We check PAI module of CHECK_USRID (include MP010530, screen 2000) and find folowing fragment of ABAP code:
  CALL FUNCTION 'RH_GET_HR_USER_SUBTY'                       "YRAK040203
       EXPORTING                                                     "YRAK040203
             mandt                 = sy-mandt                     "YRAK040203
        IMPORTING                                                     "YRAK040203
             hr_subty              = hr_subty                         "YRAK040203
        EXCEPTIONS                                                    "YRAK040203
           SUBTYPE_NOT_AVAILABLE = 1                                "YRAK040203
             OTHERS                = 0.                               "YRAK040203
    IF p0105-usrty = hr_subty.                                        "YRAK040203
    MESSAGE E900 WITH  PA0105-PERNR.                           "YRAk028906
      MESSAGE e900 WITH object_found double.                     "YRABEWERBER
    ELSE.                                                                  "YRAK040203
    message W900 with pa0105-pernr.                                 "YRAK040203
      MESSAGE w900 WITH object_found double.                     "YRABEWERBER
    ENDIF.                                                                 "YRAK040203
where p0105-usrty=0001 and hr_subty is equivalent field GSVAL=0001 in table T77S0. In other terms, when we are
maitain subtype 0001, the first condition (marked bold) is always executed.
For what the "else" condition is used, if it never be executed? If we will change value GSVAL from 0001 to 0002, theoretically, we will get "warning" instead "error", because p0105-usrty = hr_subty=false and code MESSAGE w900 WITH object_found double will be executed.
Any ideas?
Regards.

Similar Messages

  • How to create new user with more than one default folder

    hi
    A new user created in OCS has only one default folder(Inbox).
    I want to create new user with customized default folder.
    for example:
    a new user has more than one default folder(Inbox,Outbox,Draft,Dustbin...)
    And also I want to automaticly enable the functions:
    When sending messages, place a copy in Outbox
    Keep message drafts in Draft
    Move deleted messages to Dustbin
    who know that?
    thanks

    The same reason that Apple and 3rd Party vendors put multi-size templates in one file I expect. I am trying to construct an in-house standard template for use in our company, and it is easier to manage if there is only one file to send to people rather than many - both initially and for subsequent edits / updates to the template.
    Of course it would be possible to create several templates (one for each size). But since it is clear that templates can be combined, it appears sensible to do this - unless the doing of it is horridly complicated

  • My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.

    My HP Officejet 6500 E709a All-in-One will not print more than one copy at a time.  This is especially disconcerting at Christmas time when you're trying to get Christmas letters in the mail!  Any help?

    The cyan portion of the printhead may be clogged.  I would suggest running the diagnostics shown here.  If three levels of cleaning of the printheads does not resolve the issue you may need a new printhead.
    Bob Headrick,  HP Expert
    I am not an employee of HP, I am a volunteer posting here on my own time.
    If your problem is solved please click the "Accept as Solution" button ------------V
    If my answer was helpful please click the "Thumbs Up" to say "Thank You"--V

  • If possible, one SoftReference refer to more than one object?

    Hello,
    I want design a cache to keep huge number objects.
    If create a new SoftReference intance for each object,
    will take a lot of space and time.
    So, one SoftReference refer to more than one object, if possible?

    or arrange your objects into buckets somehow and have
    soft references to the bucketsEn, It's a good idea. but I think it doesn't work.
    My problem is:
    There are many caches(cache1, cache2.......), they may cache a lot of same object instance.
    then, I want to keep a object pool, and try to get the equal object from pool before put a object into a cache, if there is an equal object, put the equal object into cache, if there is no equal object, put the target object into pool and cache. the object pool may very huge because there is lot of objects. So it's necessary to release the object in the pool if no cache referes to the object(the caches contain the object may removed). Then SoftReference come into my mind. I try to create a SoftReference for each object in the pool, but soonly, I find there are two problems:
    1, A lot SoftReference instances take much memory.
    2, Need some time to new and reclaim the SoftReference intances.
    I think SoftReference may work fine to cache the object frequently used,
    but the object number can't be too large.
    Now, I don't use object pool. replace starting a thread to scan those cache s and combine the same objects intervally. It can scan about 2000,000 objects one second in my pc. It's ok for my project. But I am looking for some better way still.

  • One BIA- Box for more than one BI system ?

    Hello,
    Do you have any experience or detailed documentation about BIA Landscape ?
    My question is
    Must be a 1:1 relationship between the BI system and the BI Accelerator?
    Is it possible connect more than one test systems (non-productive) to one BIA- Box.
    I need some detailed documentation.
    Thanks a lot.

    Hi Devrim,
    Must there be a 1:1 relationship between the BI instance and the BI Accelerator?
    The only supported configuration for productive systems is a 1:1 connection between the BI instance and the BI accelerator. The reason for this is the interdependency between BIA and BI is primarily guaranteeing best performance. In addition, this 1:1 assignment keeps interdependencies (such as synchronized patching, backups etc.) at a minimum.
    For any non-productive systems (less requirements towards high performance and disaster tolerance), you can also connect one BIA box with several BI instances. Note that reorganization or restart of one BIA instance affects the others.
    Regards,
    Anil

  • Having a user in more than one group makes them choose a group at login..

    hello
    osx server 10.5.6
    xserve quad core xeon
    when a user is in more than one group in OD they are made to choose which group they want to log in to when logging in.
    all groups have home folders that are automounted on login under groups->preferences->login->items->add group share point
    and then also under groups->preferences->dock->dock items->documents and folders->add group folders is checked and the group folder is added as well under here.
    when they are in a single group and they log in, their group folder is automatically added to the dock. it's great.
    my question is, how do i have someone in multiple groups have all the group folders show up on the dock? why do they have to choose a group when they log in? it's very constricting.
    any ideas?

    Hi Jakelh, I'd be looking at Tips and Tricks
    especially pages around page 80 seem to come close to what you want.
    Cheers

  • ACL and user with more than one group

    I have a (simple) question, but I coudn't find answer in docs :(
    My problem is:
    I want to have in Tuxedo users, which belong to more than one ACL group. Each
    of this group have some special rights, i.e. group A could execute services K,L,M
    and group B could execute services M,N,O. If my user belongs to A and B group,
    which rights it have? Your rights are sum of rights of group or common part of
    them ? I will be very greatful for link to docs talking about it ....
    Best regards
    Dominik Michniewski

    user3715462 wrote:
    Hi All,
    it's just a question
    we're using R12 12.1.3 db: 11Gr2 on OUL5x64
    is it possible for an oracle user that can have more than one email address?
    i add 2 email addresses in E-MAIL box
    and it did not seem to work.
    Thanks in advance.
    Regards,What email addresses are you referring to? Is this at the OS level or the database/application level? Please elaborate more.
    Thanks,
    Hussein

  • ALE distribution model - one message type to more than one recipient

    Hello colleagues,
    currently I'm working on an integration project between one SAP system and an e-shop system. The communication is established through IDOCs ( both inbound and outbound ). There is another system ( POS ) which is already integrated
    with SAP via IDOCs also.
       Now I'm facing the following problem regarding distribution of transactional IDOCs ( orders, deliveries, etc. ): when assigning one message type ( for example DESADV - Delivery: Shipping notification ) to more than one external system in ALE distribution model I receive a message alerting that one message type can be send to only one recipient.
    The distribution model is as follows:
    Model Views
       SAP to POS
          SAPDEV ( the SAP system )
             POS ( the external POS system )
                DESADV
       SAP to E-SHOP
          SAPDEV ( the SAP system )
             E-SHOP ( the external e-shop system )
                DESADV
       Well, the system message is clear and I did the obvious: create a complete copy to the original message type and than assign it to the E-SHOP system ( the original message type is already used in integration between SAP and POS ).
    As you can see I have found a workaround already but I think that it comes natural to SAP to communicate with other systems and to exchange same kind of documents to those systems and I can't believe that there isn't a standard solution for situation like this.
    FYI I'm working on SAP ECC 6.0
    Thanks in advance.
    Wish you nice day and successful week ,
    Vladimir

    I believe when ePrint server has received the email, it made the necessary settings and configured the job for printing and then it went for "Reply All" option. So here it cannot send the print job to your personal email ID and the error came up.
    The only option I can think of is add the printer email ID to your email contact list and give it a name like MyPrinter so you can remember easily , just like email contacts are added in Outlook.
    Mark this post as answered so that others can find it useful.
    Say "Thanks" by clicking the Kudos Star in the post that helped you.
    Please mark the post that solves your problem as "Accepted Solution"

  • One Key FIgure in more than one column with different restrictions

    Hi,
      I am using a key figure in more than one column with different restrictions, but restriction in one column is affecting the result in other column. What shall i do to make it independent from one another??

    Hi Pravender Chauhan,
        If you want in Single column different value for different Rows based on same Key Figure, you can create Structure where you can define different logic for each row but using same key figure.
    If you want to use different Key figures then you should have to Restricted Key Figure and for any calculation you can use calculated Key figure.
    Assign points if Useful.
    Regards,
    Rajdeep.

  • Want to homeshare from one computer simultaneously to more than one Apple TV

    I am trying to stream my Itunes library to more than one source.  I have an Apple TV connected to one stereo receive and an Airport Express to another in a different part of my home.  However I have only been to send music to one source at a time.  Is there a way to 'homeshare' or stream to multiple receivers?

    Airfoil can do what you want.

  • Is purchase of one copy allowable on more than one mac?

    is purchase of one copy of OS X allowable on more than one mac?

    Ex, purchase OSX Mountain lion once, insstall it on 10 devices.
    There isn't a limit. That 10 device limit is for content from the App Store (ie iTunes Store), not the Mac App Store—two different places; two different license agreements.

  • One position reporting to more than one position in other org unit

    Hi Experts,
    How to map in SAP if One position is reporting to more than one position in other org unit. plz explain me the in detail.
    Regards,
    Saumya Chawan.

    Hi Saumya,
    First you have to decide on the relationships you want for this position.  The question is - who will decide pay increases for this position?...who will approve vacation time?  That manager is the one who is the directly managing the position and so the position must be in the org structure for that manager's org unit. 
    Second, what is the relationship to the other manager?  This is usually a "dotted-line" or functional reporting relationship to another position.  You can use a standard relationship such as 005 or create your own. 
    Then you can use the Matrix to create the two relationships.  Easy Access:  Human Resources --> Organizational Managment --> Organizational Plan --> Matrix (transaction PPME).  Use the "Standard selection" and create the two relationships between the position and the org unit and other position (or other object depending on your requirement). 
    Paul

  • Users have more than one profile for the same role

    Hello,
    As I said in my earlier post I'm rather new to SAP.
    I'm doing now the security audit of my SAP system. In particular, I'm checking whether business users have access to DEBUG functionality.
    I have run report 'Users by complex selection criteria' and found certain number of such users. Then I looked further and discover that all these users have role X assigned to them. The profile P2 of the role X displayed in PFCG has DEBUG functionality deactivated. After second look I discovered that all these users have earlier profile P1 for the same role X assigned to these users. This profile P1 contains the functionality in question.
    I solved the issue by revoking the role X from the users and assigning it again. Both P1 and P2 profiles were removed from the users and only P2 was reassigned again.
    I used to think that role may have only the profile that is displayed in PFCG? Also, I used to think that if the role profie is regenerated the newly generated profile automatically replace the old one assigned to users. Am I wrong?

    Hi Pavel
    In simple and short ..
    Role contains authorization objects..
    Maximum limit of authorization objects for a role is 150 .
    So a role can accommodate 150 authorization objects.
    New Profile ABC is created , when ever you create a new role. 1-1 relation.
    But if a role has more than 150 authorization objects .. then automatically a new profile ABC01 will be created and it will also be aligned to that role .
    if role has 400 auth objects, then profiles will be ABC ,ABC01 ,and ABC02
    i hope this helps you
    Cheers
    Pavan M

  • User access more than one application

    how can i give user access on more than on apex application

    >
    Welcome to the forum: please read the FAQ and forum sticky threads (if you haven't done so already), and update your forum profile with a real handle instead of "984229".
    When you have a problem you'll get a faster, more effective response by including as much relevant information as possible upfront. This should include:
    <li>Full APEX version
    <li>Full DB/version/edition/host OS
    <li>Web server architecture (EPG, OHS or APEX listener/host OS)
    <li>Browser(s) and version(s) used
    <li>Theme
    <li>Template(s)
    <li>Region/item type(s) (making particular distinction as to whether a "report" is a standard report, an interactive report, or in fact an "updateable report" (i.e. a tabular form)
    With APEX we're also fortunate to have a great resource in apex.oracle.com where we can reproduce and share problems. Reproducing things there is the best way to troubleshoot most issues, especially those relating to layout and visual formatting. If you expect a detailed answer then it's appropriate for you to take on a significant part of the effort by getting as far as possible with an example of the problem on apex.oracle.com before asking for assistance with specific issues, which we can then see at first hand.
    how can i give user access on more than on apex applicationSee +{thread:id=515240}+ for the basic technique, and these Oracle Magazine articles for extended examples:
    <li>Creating Custom Authentication
    <li>Build a Menu Framework
    Note that APEX has a built-in publish-and-subscribe model. You create a "master" application to contain publishable components like authentication schemes, LOVs and templates. Theme templates are created, maintained and published through this application, and other applications reference the standard templates by subscription from the master application. Changes can be pushed out from the master application to all subscribing applications.

  • One Line Item for More than one Ship to Party

    Dear Friends
    In one sales order which has only one Line Items for example P-101 qty-40 pcs. That 40pcs should shipt to my 4 ship-to-party. How I end user to do it. in one Line item in One Sales Order.
    Kindly Regards
    Arun

    Hi Arun,
    First create four ship to party master data which will be having different address.
    Then assign those ship to party in your sold to party master data in the partner tab.
    If you want sent material P-101 to different persons then you have to divide the quantities in the line item like this
    P-101          10
    p-101          10
    p-101          10
    p-101          10
    Now select one line item and click on detail screen.
    After that go to the Partner Tab and change the Ship to Party for that particular item.
    Do this same procedure for other three line item also.
    Try this method it might work.
    Suneet Prakash

Maybe you are looking for