IT_SORT table in REUSE_ALV_GRID_DISPLAY does not work.

Hi all!!!
I'm displaying an ALV but when trying to display only the totals my IT_SORT table doesn't work.
In my report I have this
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
       EXPORTING
            i_callback_program      = gd_repid
            i_callback_top_of_page   = 'TOP-OF-PAGE'  "see FORM
            i_callback_user_command = 'USER_COMMAND'
           i_grid_title           = outtext
            is_layout               = gd_layout
            it_fieldcat             = fieldcatalog[]
           it_special_groups       = gd_tabgroup
            it_sort                 = gt_sort                  
            it_events               = gt_events
            is_print                = gd_prntparams
            i_save                  = 'X'
            is_variant              = gx_variant
       TABLES
            t_outtab                = gt_output
       EXCEPTIONS
            program_error           = 1
            OTHERS                  = 2.
where
gt_sort       TYPE slis_t_sortinfo_alv,
gs_sort       TYPE slis_sortinfo_alv
then I passed
    gs_sort-fieldname = 'PSPID'.
    gs_sort-tabname = 'GT_OUTPUT'.
    gs_sort-expa = 'X'. " This will hide details lines
and
   gd_layout-totals_only        = 'X'.
But I'm still getting the details values.
I starting debbuging it and it is like the values in SORT table are not the ones that I passed to.
any idea?
Thanks.

Hi,
U should fill the SORT Table before calling the Function Module & also u should append gs_sort to gt_sort. Try to code it like below:
where
gt_sort TYPE slis_t_sortinfo_alv,
gs_sort TYPE slis_sortinfo_alv
then I passed
gs_sort-fieldname = 'PSPID'.
gs_sort-tabname = 'GT_OUTPUT'.
gs_sort-expa = 'X'. " This will hide details lines
and
APPEND gs_sort to gt_sort.
gd_layout-totals_only = 'X'.
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
EXPORTING
i_callback_program = gd_repid
i_callback_top_of_page = 'TOP-OF-PAGE' "see FORM
i_callback_user_command = 'USER_COMMAND'
i_grid_title = outtext
is_layout = gd_layout
it_fieldcat = fieldcatalog[]
it_special_groups = gd_tabgroup
it_sort = gt_sort
it_events = gt_events
is_print = gd_prntparams
i_save = 'X'
is_variant = gx_variant
TABLES
t_outtab = gt_output
EXCEPTIONS
program_error = 1
OTHERS = 2.
Hope it works!!
Rgds,
Pavan

Similar Messages

  • Select * for multiple tables in cfquery does not work anymore as it used to with CF5

    I am migrating from CF5. the following code used to work:
    SELECT *
    FROM tablea a, tableb b
    where a.id =b.id
    now I get an error when getting the value of ID (error:
    queryname.ID undefined). I suspect the * is the problem and is not
    permitted in that format with CF 7.
    Any help will be appreciated
    Thanks

    cfdump is, for the most part, a debugging tool which allows
    you to look at varialbes and their values at various points of the
    template. Rarely would you want to let real users see that sort of
    output.
    I'd be suspicious if adding cfdump, and nothing else solved
    the problem. I also wouldn't rely on it as a permanent solution.
    Using select * for a query against more than one table is still
    "sloppy" code and cold fusion tends be less forgiving of sloppy
    code with each upgrade.
    In case you were wondering, it's "sloppy" because it brings
    back more data than you need. You will never need the joining
    fields twice.

  • ABAP Webdynpro table scroll bar does not work

    Hello,
    I have created a dynamic WD table using cl_wd_dynamic_tool=>create_table_from_node. I have set the no. of visible rows to 5. Now when ever the table has more rows, it displays a vertical scroll bar. But if I scroll it down, after 5 rows, it dosent scroll further. Am I missing something here?
    Thanks and Regards,
    Sandhya

    Hi,
    I guess you might have wriiten the code in the MODFIYVIEW right.
    One thing you do....
    Use the FIRST TIME parameter , create the tbale and all. When the application runs for 2nd time, then reset the vsible row count value.
    Have you used any BIND_TABLE statement in this modfivyew.
    Please clarify above.
    Regards,
    Lekha.

  • Error in pakcage table or view does not exist but on sql prompt query works

    Hi
    Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0
    The below package compiled in system user and trying to query on view v$session_wait however getting below error.
    PACKAGE BODY SYSTEM.PK_DB_ALERT
    On line: 212
    PL/SQL: ORA-00942: table or view does not exist
    I can execute same query mentioned below from sql prompt from system user and it works fine however it doesn't like from package, Please advice, thank you in advance.
    SELECT SID, seq#, event, wait_time
    FROM v$session_wait
    WHERE event NOT LIKE 'SQL*Net%' AND wait_time <> 0
    ORDER BY 2

    SDD wrote:
    Hi
    Can any one help me to understand the error of ORA-00942: table or view does not exist while compiling the package on Oracle 9.2.0.4.0Which means package owner is granted select on view not directly but via roles. However, roles are ignored by definer rights packages/stored procedures/stored functions/triggers... You need to grant package owner select on view directly.
    SY.
    Edited by: Solomon Yakobson on Jan 21, 2010 4:06 AM

  • Select All in a table does not work for Drag and Drop

    Hi. I am using Jdeveloper 11.1.1.2 but have also reproduced in 11.1.1.3.
    I am trying to implement drag and drop rows from one table to another. Everything works fine except when I do a Select All (ctrl-A) in a table, the table visually looks like all rows are selected, but when I try to click on one of the selected rows to drag to the other table, only the row I click on is dragged.
    I tried setting Range Size -1, fetch mode to FETCH_ALL, content delivery to "immediate" but nothing works.
    I even have reproduced not using a view object but just a List of beans with only 5 or 10 beans showing in the table.
    Does anyone know how to get Select All to work for a Drag Source?
    Thanks.
    -Ed

    Frank-
    OK, thanks for looking into that. I also submitted this service request, which includes a simple sample app to demonstrate the problem:
    SR #3-2387481211: ADF Drag and Drop does not work for rows in table using Select All
    Thanks again for the reply.
    -Ed

  • FPM Message Manager message's HyperLink does not work in Table

    Hi FPM experts,
    I use FPM in my application and I want to use FPM Message Manager with hyperlink pointing to cells with errors in a table with report_bapiret2_message. The hyperlink does work when pointing on stand alone input field, but it does not work when pointing on a input field in a table.
    Here is a piece of my code. What's wrong?
      data is_message type bapiret2.
      is_message-type = 'E'.
      is_message-id = 'TEST'.
      is_message-number = '1'.
    wd_comp_controller->mr_fpm_message_manager->
       report_bapiret2_message( is_bapiret2 = is_message
                                             io_component = wd_comp_controller
                                             io_element = lo_el_table_elements " point on the element in my context
                                             iv_attribute_name = 'VALUE' ).  " Name of my attribute in context
    Thanks
    Davy
    Edited by: Davy Veilleux on Jan 4, 2009 4:19 PM

    Any answers to this question?
    I am facing the same issue. Using FPM Message Manager  with the io_element and iv_attribute parameters pointing to an element in an context node having cardinality = "0...n" does not show the hyper link.
    Any Help is Appreciated.

  • Temporary Table In SAP Query - Does not Work?

    DECLARE @date DATE
    DECLARE @delrows INT
    DECLARE @delquan INT
    DECLARE @a INT
    DECLARE @recrows INT
    DECLARE @recquan INT
    SET @a=0
    IF OBJECT_ID('tempdb..##tab) IS NOT NULL DROP TABLE ##tab
    CREATE TABLE ##tab
    [Date] date,
    [Delivery Rows] varchar(40),
    [Delivery Total Units] varchar(40),
    [Receipts Rows] varchar(40),
    [Receipts Total Units] varchar(40),
    WHILE @a!=7
         BEGIN
         SET @date=DATEADD(day,-@a, getdate())
         SELECT @delrows=ISNULL(COUNT(DLN1.[LineNum]),0), @delquan=ISNULL(SUM(DLN1.[Quantity]),0)
         FROM ODLN
         INNER JOIN DLN1 ON ODLN.[DocEntry]=DLN1.[DocEntry]
         WHERE ODLN.[CreateDate] = @date
         SELECT @recrows=ISNULL(COUNT(PCH1.[LineNum]),0) , @recquan=ISNULL(SUM(PCH1.[Quantity]),0)
         FROM OPCH
         INNER JOIN PCH1 ON OPCH.[DocEntry]=PCH1.[DocEntry]
         WHERE OPCH.[DocDate]=@date
         SET @a=@a+1
              INSERT INTO ##tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
    END
    SELECT * FROM ##tab
    {/code}
    Can anyone explain why this query does not work in SAP? It works fine on SQL but gives me this message in SAP:
    1). [Microsoft][SQL Server Native Client 10.0][SQL Server]Incorrect syntax near ')'.
    2). [Microsoft][SQL Server Native Client 10.0][SQL Server]Statement 'Service Contracts' (OCTR) (s) could not be prepared.
    Edited by: Chris Candido on Feb 2, 2011 8:38 PM

    Chris,
    There are several areas in your code which needed changes. 
    1. On the field name for your temp table you had spaces.
    2. The SAP table name ODLN, OPCH, PCH1 had to be fully referenced like
    [dbo].[ODLN]
    3. You really need not have ## in front of your temp table, it could just be #
    The select at the end is actually what causes the most problem as for some reason from within SAP it does not produce the result.  I would suggest you put the whole code into a Stored Procedure and call the SP from SAP.  Corrected SQL below.  If you remove the Select line at the end the query would work with in SAP, but keep it give give you an error. SP is the best option for this.
    DECLARE @date DATE
    DECLARE @delrows INT
    DECLARE @delquan INT
    DECLARE @a INT
    DECLARE @recrows INT
    DECLARE @recquan INT
    SET @a=0
    IF object_id('tempdb..#tab') IS NOT NULL
    BEGIN
       DROP TABLE #tab
    END
    CREATE TABLE #tab
    [Date] date,
    DeliveryRows varchar(40),
    DeliveryTotalUnits varchar(40),
    ReceiptsRows varchar(40),
    ReceiptsTotalUnits varchar(40),
    WHILE @a!=7
    BEGIN
    SET @date=DATEADD(day,-@a, getdate())
    SELECT @delrows=ISNULL(COUNT(DLN1.LineNum),0), @delquan=ISNULL(SUM(DLN1.Quantity),0)
    FROM [dbo].[ODLN]
    INNER JOIN DLN1 ON [dbo].[ODLN].DocEntry=DLN1.DocEntry
    WHERE [dbo].[ODLN].CreateDate = @date
    SELECT @recrows=ISNULL(COUNT([dbo].[PCH1].LineNum),0) , @recquan=ISNULL(SUM([dbo].[PCH1].Quantity),0)
    FROM [dbo].[OPCH]
    INNER JOIN [dbo].[PCH1] ON [dbo].[OPCH].DocEntry=[dbo].[PCH1].DocEntry
    WHERE [dbo].[OPCH].DocDate=@date
    SET @a=@a+1
    INSERT INTO #tab VALUES(@date,@delrows,@delquan,@recrows,@recquan)
    END
    SELECT * FROM #tab
    Suda Sampath

  • Can't get Sequencing working (table or view does not exist...)

    Hello,
    I'm running JDeveloper 10.1.2 on a Oracle 9i database.
    All my mappings are correct, i mean, i can query the database using the Toplink API and list all the objects on teh database. What it's not working is inserting new objects due to this sequencing problem.
    This is what i'm doing:
    myClass newObject = (myClass) uow.newInstance(myClass.class);
    uow.assignSequenceNumber(newObject);
    But this is generating this Exception:
    Local Exception Stack: Exception [TOPLINK-4002] (OracleAS TopLink - 10g (9.0.4.5) (Build 040930)): oracle.toplink.exceptions.DatabaseExceptionException Description: java.sql.SQLException: ORA-00942: table or view does not exist
    Internal Exception: java.sql.SQLException: ORA-00942: table or view does not exist
    Error Code: 942
    I figured this could be a problem with the sequencing configuration and all that stuff (I don't have a sequence table). So i checked my configurations...
    'Toplink Mappings' is setup to 'Use Native Sequencing', as per Notes on http://www.boku.ac.at/oradoc/ias/10g(9.0.4)/web.904/b10313/dataaccs.htm. This page also states this:
    "When using native sequencing with Oracle, specify the name of the sequence object (the object that generates the sequence numbers) for each descriptor. The sequence preallocation size must also match the increment on the sequence object" (...) "Use preallocation and native sequencing for Oracle databases.
    And this is exactly what i'm doing. On myClass mappings, the 'Use Sequencing' checkbox is checked, the correct sequence name is typed correctly, once this is the same sequence i've been using for years prior to Toplink, the selected table is the correct one, just as the id field on the table.
    Another thing is that the 'Preallocation Size' on Toplink Mappings match the increment value on the database sequence.
    I must be missing something...
    Can anybody shed some light on this?
    Thanks a lot to all.

    Hello
    The method accessing check box tells TopLink to use the get/set methods on your object to set its attributes - If it is unselected, TopLink will set the attribute directly. Great if you have business logic in your get/set methods that you don't want TopLink to hit each time it creates an object after a read from the database (or registers, etc).
    The problem you are encountering seems like you have sequencing set to "Use Default Sequencing Table". This option is on the "TopLink Mappings" page on the "Database info" tab just below where you would have set which connection to use. You will need to ensure you have the "use Native sequencing" selected. If you set this information instead through code, be sure you do it on the database login before you login to the session.
    If this doesn't help, try turning on TopLink logging to see the SQL statement that causes the problem. The knowing the table name and SQL being used might help figure out where it is being set.
    Best Regards,
    Chris

  • Copy and Paste does not work in filter statement of table data

    I am using SQL Developer 3.0.04. I can not copy nor paste in the filter criteria when watching or editing table data. Is it a bug or do I have to change some settings?

    Hi Sven,
    I did a bit more research and now I hope we will be talking about the same thing. Bear with me and let me clarify. In terms of my prior comment about the process necessary to copy a value from a data cell into the clipboard, I was totally off-base. Once the focus is on a data cell, all one need do is Edit menu|Copy or ctrl-c. I have no idea why I had trouble with that yesterday.
    Anyway, getting back to what's relevant with regard to your issue:
    1) If something is in the clipboard, then both Edit menu|Paste and ctrl-v work for a data cell target.
    2) If something is in the clipboard, then Edit menu|Paste fails for a data tab filter target.
    3) If something is in the clipboard, then ctrl-v works for a data tab filter target.
    So obviously conditions exist where pasting to the data tab filter can work. But here is a scenario where I found a problem similar to what you describe:
    1) For the EMP table in SCOTT, display all employees in the data tab.
    2) Apply a filter. For example, filter on JOB='SALESMAN'. Now 4 salesman, all in dept 30, are displayed.
    3) Next you decide to view only employees in dept 30.
    4) Copy the value 30 from the DEPTNO column. Carelessly put the focus on ENAME column in one of the data tab rows.
    5) Next focus on data tab filter to blank out JOB='SALESMAN' predicate. Drop down to select DEPTNO. Append an = sign.
    6) Finally Edit menu|Paste. Instead of seeing DEPTNO=30 in the filter, we see...
    7) The filter contains nothing and is disabled (greyed out).
    8) The ENAME column of the prior focus now contains the value 30 rather than the a salesman's name.
    Your case may be different/more complex, but at least this simple case demonstrates in a repeatable fashion what I noticed but didn't describe very well yesterday. I have logged the following internal bug:
    Bug 12753266 - EDIT MENU PASTE INTO DATA TAB FILTER DOES NOT WORK AND MAY DISABLE THE FILTER
    Using the rollback button, blanking out any filter value and hitting enter displays all original employee rows.
    Regards,
    Gary

  • Early Adopter release : Extract DDL for tables does not work

    Hi,
    just had a look at Raptor - really nice tool - easy install - could be a replacement for SQLnavigator for us. One or two things I noticed though ...
    1)
    Export->DDL for tables does not work throws following error
    java.lang.ClassNotFoundException: oracle.dbtools.raptor.dialogs.actions.TableDMLExport
         at java.net.URLClassLoader$1.run(URLClassLoader.java:200)
         at java.security.AccessController.doPrivileged(Native Method)
         at java.net.URLClassLoader.findClass(URLClassLoader.java:188)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:306)
         at oracle.ideimpl.IdeClassLoader.loadClass(IdeClassLoader.java:140)
         at java.lang.ClassLoader.loadClass(ClassLoader.java:251)
         at java.lang.ClassLoader.loadClassInternal(ClassLoader.java:319)
         at java.lang.Class.forName0(Native Method)
         at java.lang.Class.forName(Class.java:164)
         at oracle.dbtools.raptor.dialogs.BasicObjectModifier.launch(BasicObjectModifier.java:142)
         at oracle.dbtools.raptor.dialogs.BasicObjectModifier.handleEvent(BasicObjectModifier.java:210)
         at oracle.dbtools.raptor.dialogs.actions.XMLBasedObjectAction$DefaultController.handleEvent(XMLBasedObjectAction.java:265)
         at oracle.ide.controller.IdeAction.performAction(IdeAction.java:530)
         at oracle.ide.controller.IdeAction$1.run(IdeAction.java:785)
         at oracle.ide.controller.IdeAction.actionPerformedImpl(IdeAction.java:804)
         at oracle.ide.controller.IdeAction.actionPerformed(IdeAction.java:499)
         at javax.swing.AbstractButton.fireActionPerformed(AbstractButton.java:1849)
         at javax.swing.AbstractButton$Handler.actionPerformed(AbstractButton.java:2169)
         at javax.swing.DefaultButtonModel.fireActionPerformed(DefaultButtonModel.java:420)
         at javax.swing.DefaultButtonModel.setPressed(DefaultButtonModel.java:258)
         at javax.swing.AbstractButton.doClick(AbstractButton.java:302)
         at javax.swing.plaf.basic.BasicMenuItemUI.doClick(BasicMenuItemUI.java:1000)
         at javax.swing.plaf.basic.BasicMenuItemUI$Handler.mouseReleased(BasicMenuItemUI.java:1041)
         at java.awt.Component.processMouseEvent(Component.java:5488)
         at javax.swing.JComponent.processMouseEvent(JComponent.java:3126)
         at java.awt.Component.processEvent(Component.java:5253)
         at java.awt.Container.processEvent(Container.java:1966)
         at java.awt.Component.dispatchEventImpl(Component.java:3955)
         at java.awt.Container.dispatchEventImpl(Container.java:2024)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.LightweightDispatcher.retargetMouseEvent(Container.java:4212)
         at java.awt.LightweightDispatcher.processMouseEvent(Container.java:3892)
         at java.awt.LightweightDispatcher.dispatchEvent(Container.java:3822)
         at java.awt.Container.dispatchEventImpl(Container.java:2010)
         at java.awt.Window.dispatchEventImpl(Window.java:1774)
         at java.awt.Component.dispatchEvent(Component.java:3803)
         at java.awt.EventQueue.dispatchEvent(EventQueue.java:463)
         at java.awt.EventDispatchThread.pumpOneEventForHierarchy(EventDispatchThread.java:242)
         at java.awt.EventDispatchThread.pumpEventsForHierarchy(EventDispatchThread.java:163)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:157)
         at java.awt.EventDispatchThread.pumpEvents(EventDispatchThread.java:149)
         at java.awt.EventDispatchThread.run(EventDispatchThread.java:110)
    and 2)
    when I click on a package body - I get "loading ..." below it but it never puts the
    procedure names in and the "loading ..."message stays in the tree view - however you do get to see the packages in the source window.
    Realise this is very much a work in progress and am grateful to see an early release such as this. Looking forward to the production release.
    Best regards,
    David.

    OK thanks for looking ....you've obviously got the fixes on your to do lists
    Noticed that the SQL tab when you select an object works fine - displays the
    DDL for the object
    Do you think you'll have functionality so you can select many objects (shift left click) and
    then create a DDL script for them? It looks like you can do this for all objects in a schema but
    the ability to select a subset of objects in a schema would be very useful for our DBA's.
    Couldn't see any good reason for keeping using SQLNavigator
    Many congratulations on producing such a useful tool.
    Kind regards,
    David.

  • ALTER TABLE command with owner does not work

    I performed the following statement in a SQLplus script where the variables were filled some lines before:
    alter table '&ownername||'.'||&tablename' move online tablespace '&tablespacename';
    However this does not work. I am getting:
    ERROR at line 1:
    ORA-00903: invalid table name
    The variables are replace correctly by SQLplus and everything owner, table, tablespace exist.
    Can I (as SYSDBA) not alter the table of another user?
    Peter

    Solomon Yakobson wrote:
    EdStevens wrote:
    Ok, you removed the mis-placed quotes, but why the double "." ??
    If you wish to append characters immediately after a substitution variable, use a <font color=red size=3>period</font> to separate the variable from the character.
    SY.Ah, I had simply never done it that way nor seen it done that way.

  • TableChanged() does not work with parrent table reference

    Hi,
    I used this example http://www.javalobby.org/articles/jtable/ where the cells refocus after updating, but I have rewrote it to my needs and the program throws nullpointerexception when I update any cell:(
    here is the tableChanged part of code:
        public class InteractiveTableModelListener implements TableModelListener {
            public void tableChanged(TableModelEvent evt) {
                if (evt.getType() == TableModelEvent.UPDATE) {
                    int column = evt.getColumn();
                    int row = evt.getFirstRow();
                    System.out.println("updated row: " + row + " column: " + column);
                   if((column + 1) >= model.getRowCount()){
                      table.removeColumnSelectionInterval(column,column);
                    }else{
                      table.setColumnSelectionInterval(column + 1, column + 1);
                    table.setRowSelectionInterval(row,row);
    }the table reference worked in the exaple but doesnt work in my program:(
    here is the init of the table in function initComponent:
            tableModel.addTableModelListener(new InteractiveTableModelListener());
            TableSorter sorter = new TableSorter(tableModel);
            JTable table = new JTable(sorter);the class is on the same level as the function
    i have searched all the internet for this with no results:(
    thank you for your advice!

    Yes, you are right, I wrote this post in a hurry and exhaused, that it does not work.
    I'm trying to write out a data file (now only a vector of data) in a JTable and I want to edit the rows and after I submit text in a cell, I want the caret to move one cell right, so the user can write another text, just like in MS Excel. At the end of the row the caret disapears but does not create another row.
    And I have problems with variable JTable table in the inner class that contains method tableChanged().
    Well After making an example I realized it worked and then I checked the example line by line and found out that I declare another JTable with the same name in the table initializing method,
    Then the variable couldnt work in tableChanged method... It was empty...
    I used your example from thread, you advised me:
    import java.awt.*;
    import javax.swing.*;
    import javax.swing.event.*;
    import javax.swing.table.*;
    public class TableProcessing extends JFrame implements TableModelListener
         // here I declare the table
            protected JTable table;
         public TableProcessing()
              String[] columnNames = {"Item", "Quantity", "Price", "Cost"};
              Object[][] data =
                   {"Bread", new Integer(1), new Double(1.11), new Double(1.11)},
                   {"Milk", new Integer(1), new Double(2.22), new Double(2.22)},
                   {"Tea", new Integer(1), new Double(3.33), new Double(3.33)},
                   {"Cofee", new Integer(1), new Double(4.44), new Double(4.44)}
              DefaultTableModel model = new DefaultTableModel(data, columnNames);
              model.addTableModelListener( this );
                    // here I declare it again, which is a MISTAKE
              JTable table = new JTable( model )
                   //  Returning the Class of each column will allow different
                   //  renderers to be used based on Class
                   public Class getColumnClass(int column)
                        return getValueAt(0, column).getClass();
                   //  The Cost is not editable
                   public boolean isCellEditable(int row, int column)
                        int modelColumn = convertColumnIndexToModel( column );
                        return (modelColumn == 3) ? false : true;
              table.setPreferredScrollableViewportSize(table.getPreferredSize());
              JScrollPane scrollPane = new JScrollPane( table );
              getContentPane().add( scrollPane );
          *  The cost is recalculated whenever the quantity or price is changed
         public void tableChanged(TableModelEvent e)
              System.out.println(e.getSource());
              if (e.getType() == TableModelEvent.UPDATE)
                   int row = e.getFirstRow();
                   int column = e.getColumn();
                   if (column == 1 || column == 2)
                                   // AND here is not initialised - throws NullPointerException
                        TableModel model = table.getModel();
                        int     quantity = ((Integer)model.getValueAt(row, 1)).intValue();
                        double price = ((Double)model.getValueAt(row, 2)).doubleValue();
                        Double value = new Double(quantity * price);
                        model.setValueAt(value, row, 3);
         public static void main(String[] args)
              TableProcessing frame = new TableProcessing();
              frame.setDefaultCloseOperation( EXIT_ON_CLOSE );
              frame.pack();
              frame.setLocationRelativeTo( null );
              frame.setVisible(true);
    }

  • DB Adaptor import table option does not work with the AS400 DB

    1. The DB Adaptor import table option does not work with the IBM i-series(AS/400) tables(Both in ESB and BPEL).
    2. Also I was not able to import tables from multiple databases into
    the same BPEL project.

    Both of these issues work in preview version. My earlier posting was based on beta version testing.

  • Why does InDesign interactives table of contents does not always work in page mode ?

    I'm working on a large document (400 pages) made of 12 Indesign documents in a book. When I export the entire book in one interactive pdf file, some the elements from the interactive table of content do not work. When I export the file as «spread», everything works, when I export the file in «pages» some elements loose their interactivity.
    I'm on CS6 on Mac.
    (Sorry for my English)
    Any solution anyone ?

    Moved from the Creative Cloud to the InDesign forum. They will be able to help you here.

  • The troubleshooting options for setting firefox as default does not work

    When I go to my Home-Welsome to Century Link-Mozilla Firefox; a tab comes up saying "setting firefox as the default browser does not work". I tried all the various troubleshooting options. They did not work.

    Hello,
    Did you pass the parameters: IS_LAYOUT & I_SAVE to the ALV function module?
      FP_ST_LAYOUT-ZEBRA = C_X.
      FP_ST_LAYOUT-COLWIDTH_OPTIMIZE = C_X.
      CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
        EXPORTING
          I_CALLBACK_PROGRAM       = SY-REPID
          IS_LAYOUT                = FP_ST_LAYOUT
          IT_FIELDCAT              = FP_IT_FIELDCAT
          I_SAVE                   = 'A'
        TABLES
          T_OUTTAB                 = FP_IT_OUTPUT
        EXCEPTIONS
          PROGRAM_ERROR            = 1
          OTHERS                   = 2.
      IF SY-SUBRC <> 0.
    *   Error in calling Standard ALV Functional Module
        MESSAGE I019. "Error Occured in ALV Function Module
        LEAVE LIST-PROCESSING.
      ENDIF.
    Hope this helps.
    BR,
    Suhas

Maybe you are looking for