Itunes 11 autostart without user access....and other dirty deeds....

It *****,
iTunes 11.1.2 always autostarts and plays music after a while.
killall iTunes helps. For about 5 minutes or so.
Magic Trackpad stops. Mouse pointer hangs. The only way is to disconnecting and reconnecting the Pad.
I think there are Bluetooth problems with Mavericks.
Hope there will be updates this month.

Well done Apple!!!!
I thought the problem was with the itunes 11.4 update, because after updating all devices where giving me the problems, but now we have updated our Iphone 4S to version 8.0.2 and this one has been connected to the itunes, found all devices showing there normal storage capacity again

Similar Messages

  • Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password is now not working after the upgrade to 10.5.

    Object is to sync address and calendar between laptop with Max OS 10.4.11 and iPhone. Upgrade of our 10.4.11 laptop to 10.5 is accomplished and we now need to upgrade Quicktime and iTunes; however, the user name and password for the laptop is now not working after the upgrade to 10.5., though it was working prior to the upgrade, for file sharing.

    @ BDAqua > I tried your suggestion but no luck. holding opt+command just gave me a blue screen and it rebotted, pushing the disk out of the drive. Yes, the macbook has 1 gb of ram. I realize that the min req. call for 2 gb of ram so i've got an order in for another dimm to put into the machine. Thanks for your suggestions.
    @ a_brody > Yes. The machine was plugged into a power source. The disk promts you to do that and i recall aspect this form other installs. Thanks for the reminder tho! ( btw your second post is like greek to me man!) 
    @ Kuncklesmac > You're right about Snow Leopard being an upgrade from Leopard. I'm aware of this. And yes previously i've been told by Apple that I needed the Box Set (not the family pack.  i am using the family pack for OS Snow Leopard) to upgrade my 10.4.11 mac - they never mentioned adding ram but i figured that out on my own and an apple specialist recommended it when i purchased Snow Leopard and confirmed that I coul duse the Snow Leopard to upgarde from Tiger (10.4.11). I've also read extensively (as i said above) that it isn't necessary (always) to buy the box set. Several 10.4.11 users report having upgraded using the Snow Leopard upgrade disk only (not the Box Set) without trouble on intel macs (also see the apple link i posted). So i'm just ondering how they did it and i cannot. 
    Thanks fo rall yor help!

  • HT201269 I have my iTunes library on my Windows 7 machine on an external hard drive.  I purchased a new Macbook and would like to point my new machine at my iTunes library without losing anything and then deactivate iTunes on the Windows machine, help ple

    I have my iTunes library on my Windows 7 machine on an external hard drive.  I purchased a new Macbook and would like to point my new machine at my iTunes library without losing anything and then deactivate iTunes on the Windows machine, help please

    Sorry, but this does not seem to be an iPad question. I'd therefore suggest you ask in the iTunes for Mac forum.
    Regards.

  • Audit log of the User access and permissions

    Hi All,
    We need to have the Audit trail of the user access and permission. Meaning Changes to user access rights will be logged.
    This should include:
    Current Access Rights (including Date the access was given),
    Group membership (including Date the access was given),
    Previous Access Rights (including Date the access was given and revoked).
    Can we reuse any out of the box functionality of CQ. Does anybody having any pointer to this?
    Thanks,
    Debasis

    Hi PChamoun,
    At the outset thanks a lot for the clue. I am very new to CQ. Could you please guide me like, what are the API required to track the rep:policy node changes. Even if workflow will be started after any change to rep:policy but how I will be able to get the information of what change happened.
    Thanks,
    Debasis

  • How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents

    Dear
    Experts, I have a very exciting demand, the board of a customer.
    I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
    How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
    I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
    I ask, what is the standard solution that is used in these cases?
    Thank you
    Miki

    Dear
    Experts, I have a very exciting demand, the board of a customer.
    I need to create an analytical application on Oracle Portal, UCM, Spaces, WebCenter, to inform me which quantitatively pages, url and documents are accessed.
    How to analyze the navigation flow in Oracle Portal, Number of unique users, downloads and other estastisticas of use of the Portal and Documents?
    I thought I'd create a ods with the data of Content Tracker and Google Analytics, and model the analysis through the BIEE.
    I ask, what is the standard solution that is used in these cases?
    Thank you
    Miki

  • Itunes crashes while adding artwork and other information

    Itunes crashes while adding artwork and other information to video and music files.  Killing the process is the only cure and crashes after inputing information for 5-10 video files.  I have the latest version of itunes, and this did not happen to pre 10.x versions of itunes.  Running windows 7 ultimate 64 bit.  64-bit iTunes.

    @tposchi
    I do not think it has anything to do with router at all. I have 25mbps down and 6mbps up where I live. This is not shabby at all and I have latest TimeCapsule which is acts as my router at home. Yet the latest iTuns blows up playing streams. So I use this player instead: http://www.videolan.org/vlc/index.html. Not as pretty, but at least I can play radio stream 24 hours a day with it and have no problems. iTunes 10.7 does not last one hour I too wish Apple fix it.

  • HT4889 what is included when you migrate users, settings and other files?

    When you use the Migration Assistant, what is included in "users," "settings" and "other files"?

    I think it's offered as an option at some point during the installation. But you can always start the Migration Assistant at any later point (it's located in Applications/Utilities) - that's the same application.
    That's what I did, actually. I did a clean install first and only after everything was up and running did I hook up my old G4 and transferred things over with the help of the Migration Assitant.

  • Generate a Report Dynamically without User Intervention and Output to XML

    Here's the scenario for which I am trying to find a solution. Any help would be greatly appreciated.
    I have a series of reports that the users generate from a UI by selecting the report, setting the values for a list of parameters, and then click a submit button. The report is generated in the UI for them to view. They can print it from here or export it to Excel.
    They would like to be able to schedule a report to run daily without user intervention using a saved set of parameters. The system would run the report automatically and email it to a defined set of email addresses.
    To do this, we need to have the report generated in a string or xml so a Java process can read it and email it.
    I see that I can change a report's template to export:xml so I feel that it is possible. How can I export a report to XML without user intervention? Can the report template be changd dynamically at runtime? Ideally, I need some way to call this same report and have it output as a string data or xml to be used by a Java process that would store and generate the report for email.

    Hi Kumar,
    From Program1 you are calling Program2, using submit syntax (inside Program1).
    While using submit, if you have correctly filled up the selection screen of program2, then it will AUTOMATICALLY get executed, WITHOUT F8.
    If there is any compulsary field in program 2, which does not get populated, then it will not run automatically, or unless some special code is written in program2.
    If you do not want the output of Program2 on screen, then u can use
    SUBMIT Program2 AND RETURN.
    In that case, no selection screen (of program2) will appear and neither the output of program 2.
    Regards,
    Amit Mittal.
    Edited by: Amit Mittal on Dec 23, 2009 4:10 PM

  • When completing install win 8 pro on my macbook pro using boot camp, the win 8 can't be started to complete win configure like user account and others, please help

    please, when I installed win 8 pro using boot camp vers. 5.0.2 it was completed but when win start the first time to be signed my user name and password the mid of screen appeare blue and the other black, then the whole things stoped.
    knowing that the win instalation going smoothley without problem during progress
    regards

    Did you download and install the Bootcamp Windows Support software according to the Bootcamp Installation Guides? http://www.apple.com/support/bootcamp/
    There is a Bootcamp Forum here. https://discussions.apple.com/community/windows_software/boot_camp
    You should ask Bootcamp questions there. The moderators may move this thread to the Bootcamp Forum.

  • SSM 7.0 - SSM User Interface user access and utilization

    Hi,
    Does anybody know how to obtain the SMM User Interface access and utilization of the users?
    I mean User Interface access statistics like:
    - Number of loggins per day, week, month.
    - Last loggin
    - Tab used
    - Minutes log inn
    Thank you very much in advance.
    Kind regards,
    Santiago

    Santiago,
    Strategy Management does not track that kind of usage of the system. Any tracking like that might be something that NetWeaver CE could do, but that would be a question for the NetWeaver CE Forum as I couldn't provide guidance on how to set it up.
    Regards,
    Bob

  • CUP 5.3: Missing End User Personalization and others

    Upgraded from 5.2 to 5.3 SP06.  I'm expecting to see End User Personalization, User Review, and Change Long submenus in the Configuration tab, but they are missing.  I've imported the SP06 XML files for CUP, and configured the system to no avail.  I've opened up a support message, but was hoping that someone else has experienced this.

    Hi William
    Have you done all the steps related with POST upgrade steps in the installation document?
    also have you uploaded AE_init_append_data_CC.xml ?

  • How to install windows 7 Firefox without "Ask search" and other software?

    I would like to install pure Firefox, lean without getting other add-on software, such as "Ask search". I am requesting download from Mozilla home page. Thank you for helping.

    I've moved this over to the Firefox Support forum.
    You have two options.
    1) Uninstall Ask toolbar from the Add-ons page (Firefox menu button (top right hand corner) -> Add-ons or <i>Ctrl + Shift + A</i>
    2) Uninstall Firefox then re-install it from Mozilla directly
    *www.getfirefox.com
    Yahoo!, Ask, as well as other companies bundle their toolbars and other crap with Firefox so it's best to get it directly from Mozilla to avoid any "bloat-ware"

  • Log In screen shows my normal user names and "OTHER". How to remove OTHER?

    My Log In screen (start up box) shows my normal user names and something called "Other". How do I get rid of this Other name?
    I tried deleting "Other" in the System > Accounts, but he is not there.
    Cheers.

    How to disable the root user
    Mac OS X v10.6 and later
    1. From the Apple menu choose System Preferences....
    2. From the View menu choose Accounts.
    3. Click on the lock and authenticate with an administrator account.
    4. Click Login Options....
    5. Click the "Edit..." button at the bottom right
    6. Click the "Open Directory Utility..." button.
    7. Click the lock in the Directory Utility window.
    8. Enter an administrator account name and password, then click OK.
    9. Choose Disable Root User from the Edit menu.

  • Why doesn't my iMessage send to certain iPhone users ? And others as email address but Im on my phone?

    I need help ! Why is it not letting me use iMessage with one person specifically big it sends to others with my email address not my phone number? Anyone ?

    Hi,
    This has to do with what addresses you have linked with you Apple account and which you have set as a default to send/receive from. If you go to Settings--> Messages --> and note that your iMessages tab at the top is switched to "on" then scroll down to where is says "Send & Receive" and it will list something like your iphone number and any email addresses you have registered with Apple (I happen to have four addresses, 2 gmail, 1 icloud, and 1 me.com). Click on Send & Receive and whichever ones are selected are those that you will receive messages at or send from. If you scroll further down the page it says "Start new conversations from:" and you can select the one you would like to be the default whenever you're sneding from apps and the like on your iPhone.
    Depending on which address a person has as your contact (and assuming that address is also listed under your addresses in the iMessage section), is why you might receive texts as just an iMessage and others an email address.
    Also, if you go to Settings-->Mail, Contacts, Calendar: it'll show all of the email accounts you have associated with your iPhone and scroll down further you can see and change which is your default email account.
    I absolutely loved my iPhone 4, it has been a solid workhorse and a true pleasure! I hope you enjoy yours as much.
    Cheers~
    Andrea
    Not an Apple employee, just a happy Apple customer
    Message was edited by: gottabook

  • I Get an Error "To Access Your iTunes Library ..." And Other Things Are Wonky Too ... Can't Reset ... Internet Radio Drops ... But Things Look To Be Set Up Okay

    When I use my Apple TV and try to play music from my computer I get an error: "To access your iTunes library on Apple TV, turn on Home Sharing in iTunes on your computer using 'myname'"
    On my computer n iTunes Preferences / Sharing I have the "Share my library on my local network" checked with "Share entire library" -- no password, no update play counts.  I've turned it off and on again.
    The Apple TV settings show we are "talking to" my WIFI -- it has my network, shows a good signal strenght, all sorts of internet addresses and IP stuff I don't understand ...
    The "Internet" tab works with some of those things I'd never use -- like I see the current NHL standings.
    My TV works and I get an ATV signal and those little chimes / bongs when I hit things in the menu.  And when it works I get audio so the cables and TV are okay.
    In the past I had trouble with the settings for my favourite Internet Radio stations (the provider changed their URL but Apple didn't update the presets for a while) but those are now resolved.
    I had a crappy old G class router and week signal strenght but I have a new N class Cisco router with a strong signal.
    But other things are wonky:
    * I play interent radio and my station will go fine for about five minutes then stop -- the little wheel spins trying to reconnect.  Sometimes it resets but more often than not it won't.  I just tried again four hours later and the same thing.
    * I've unplugged the ATV and plugged it back in but no noticable improvement
    * I tried to do the factory reset from the ATV menu.  It says it will download the latest bla bla bla and after a few minutes tells me "Apple TV can't download latest update right now, try again later" -- I've tried three times today always with the same results.
    * I unhooked it from the power and HDMI and plugged it into a Micro USB cable and plugged that into my Mac -- it doesn't show up in the devices in iTunes.
    * I have a bunch of photos in a folder that I use for my ATV Screen Saver.  A few weeks ago I added two photos to that folder -- they don't show up in the ATV screen show but the others still do.
    * When I started today I checked my iTunes and the airplay icon didn't show in the bottom right (beside the genious icon and the little thing to show or hide the sidebar).  Now I noticed the Airplay icon is there.  When I try to switch from playing through my computer speaakers to my Apple TV I get an error "An unknown error (-15006) occurred while connecting to the Airplay device "Apple TV"" -- the ATV shows that Airplay is on.
    * I see from the ATV settings that I'm running ATV Software 4.4.3 (3323) and when I do a "Update Software" on the ATV it tells me that my software is current.
    * My iTunes is 10.5.2 (11) and my OS is 10.6.8 -- both are up to date.
    Yikes and double yikes!
    Any ideas?

    Hey Chunk,
    I love the idea of the ATV more than I have loved the little black box but ... famous last words ... my ATV seems to be working better these days.
    A big challenge for me was too many variables at play -- new router, new ATV OS / firmware / whatever, changing internet radio presets, a less than perfect physical set up ... and a short attention span from yours truly.
    Here's what I did.  Somwhere in these changes things got "fixed."
    * I unhooked the ATV and did a factory restore by hard wiring the ATV to my computer with a micro USB cable (no external power needed) working through iTunes (I run iTunes 10.5.2 on an iMac with OS X 10.6.8).
    * after the reset I now have ATV (is that an operating system or a firmware?) 4.4.4
    * then I plugged it back into my home theatre and it didn't work :-) but in slightly different ways.  The settings showed that I was connected to my home network but I couln't get connected using my Apple ID and no internet radio.  (it is often counterintuitive -- like why when I want my ATV to talk to my iMac over my local network am I logging in to the iTnes Store with my Apple ID? but there you go.)
    * I booked with the genius bar at the Apple Store and put my ATV in my pocket.  They pulled out a TV, HDMI cable, ATV power source and even the remote -- all I provided was my little black ATV.  We hooked the ATV to their TV and from the Apple Store (using thier WIFI) I logged in using my Apple ID and the thing worked fine.
    * so now I knew that my ATV was up to date and it worked in the Apple Store using their network so it looked like the issue was my network.
    * rebooted my router and noticed that when I had upgraded to the new super dooper Cisco n router we had plugged my iMac direct to the router via ethernet cable.  I unhooked the ethernet and now just run my computer WIFI using AirPort.
    And ...
    It works.  I use my ATV exclusivly for music -- my iTunes and internet radio and AirPlay -- and now both work fine.  The ATV does pick up photos from my iPhoto for the screen saver and all that other stuff -- netflix, youtube, the hockey scores, ... all seem to be there.  And my son played a video off his iPod Touch using AirPlay.
    I know my approach is more scattered than a proper scientific try but ...
    From my experience ... reset the ATV and get it up to date; see if it will work on someone else's network; check your network set up.
    Good luck!

Maybe you are looking for