Itunes, which version do i have ?

how do i find out what version of iTunes i have on my iPad. I have just bought the iPad 2 and presume i have the latest version, but i need to be sure.

If you have iOS 5.1.1 installed (Settings > General > About > Version) then you have the most recent version of the built-in apps, including iTunes - if you aren't on 5.1.1 then you can either update via Settings > General > Software Update (if the iPad has iOS 5+ already installed) or via your computer'e iTunes.
Updating to iOS 5+ : http://support.apple.com/kb/HT4972

Similar Messages

  • I have an old Powerbook G4 and need to install iTunes, which version do I use?

    I have an old Powerbook G4 and need to install iTunes, which version do I use?  Where would I find this version?

    iTunes 9.2.1 is the last version that would run on Mac OS X 10.4:
    http://support.apple.com/kb/DL1056
    Regards.

  • How to find out which version ipad you have

    I want to buy accessories but do not know how to find which version ipad I have. Where do you look?

    http://support.apple.com/kb/HT5452
    Regards.

  • Which version do I have and why can't my autolevel photos be read by other programs?

    As a newbi, although I've used PSE for a long time, I know almost nothing about it.
    I can't even find out which version I have. Under HELP it only says Adobe Photoshop Elements.
    Nearest I can find is a copyright of 1989-2001.
    I am using Windows XP Home, but PSE thinks it Windows 2000. I just noticed that most plug-ins are Ver. 6.0
    My main problem is I just recently used PSE to AUTO LEVEL some JPG's and did some brightness/contrast
    enhancements on other JPG's. Those JPG's cannot be read on either of my DVD players (saved to a CD) or in other software.
    They are still visible using PSE and MS preview. Even Nero Smartstart can't open them.
    Anyone have any suggestions?

    Bob
    Thanks for the reply.
    First I'm using a FujiFilm camera, FinePix S700. One of the programs that
    can't read the enhanced photos by PSE is their own FinePix Viewer V5.3.07E.
    I've tried creating another CD using the progarm NERO, which can read the
    enhanced photos, but
    those photo's won't open in my Panasonic DVD player either. Untouched photos
    open just fine on the DVD player.
    I've looked at HELP and all it says is Adobe Photoshop Elements. Another
    person from the forum says I have PSE 1.
    I'm about to call Adobe, but I dread that as my hearing isn't that good
    anymore if you know what I mean. I thought about upgrading as I obviously
    have a very old version, but didn't get very far using the Adobe website.
    Hence the upcoming phone call.
    Bud

  • My laptop's been stolen; I have serial number of my Photoshop Elements but can't remember which version; I now have Wondows 8.1. How do I know which version to redownload and install?

    Sorry...title says it all. I had a Photoshop Elements 3.0 on disk and have subsequently downloaded updates and was running an updated version on my stolen laptop with Windows 7.
    MyAccount shows my Photoshop serial number but not the version number which I have forgotten. I assume I can now redownload the version I had - updated to work on Windows 8.1 but don't know which version to download.

    Contact Customer Support by chat or by phone and they should be able to look into your purchase history.  You might even find it yourself if you poke around different links in your account.
    Here is a link to a page with options to help make contact:
    http://www.adobe.com/support/download-install/supportinfo/
    Support should be able to deactivate the software for your stolen laptop as well.

  • Which driver and find out which version i currently have(driv

    I recently bought F.E.A.R. for the pc and are having trouble with the sound in the game i.e. there is none. It was recommended to me to update my sound drivers, i don't wish to have a load of unnecessary software on my pc all i want it the drivers to make my Audigy 2 ZS to function as it should do. Could someone please advise from the below page what i need to download also could someone tell me how to find out which driver version i currently have for my Audigy 2 ZS card, thanks for any and all info you can supply.
    I have used Upload'r to shorten the url because when the full url was posted it stretched everything.
    http://url.uploadr.com/93c

    Not at all, but it is New Year and still the holiday season for a lot of people, so there are probably less folks around than usual.
    The latest full/final driver is:
    <TABLE cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>2. </TD>
    <TD height=5><FONT color=blue>Creative Sound Blaster Audigy2 and Audigy2 ZS Driver Update .84.55 (<FONT color=#222222 size=><B>6.34 MB</B>) </TD></TR></TBODY></TABLE>
    Or, if you want a newer driver and don't mind installing a beta driver, you can use this one:
    <TABLE cellSpacing=0 cellPadding=0 width="00%" bgColor=#eeeeee border=0>
    <TBODY>
    <TR vAlign=top>
    <TD vAlign=top align=right><FONT color=#330099 size=>. </TD>
    <TD height=5><FONT color=blue>Creative Sound Blaster Audigy unified series Beta driver with OpenAL support 2.08.0002 (<FONT color=#222222 size=><B>24.99 MB</B>) </TD></TR></TBODY></TABLE>
    Cat

  • Which version do I have? can I check it somewhere?

    re my browser - I do not know which version it is. Some websites tell me they are not supported by what I have, e.g. one requires F'fox version 9 - question: how do I know what I have and how to upgrade?

    Thanks for the that input,It helped and I now know what version I have.If you don't mind,I just want to let all who sees this now how great this was for me.I'm new to the computer and find myself lost 70% of the time.Now I can get a lot of the answers I've been wanting for quite some time.Thanks again.Thanks renataac

  • HT1414 how do i go about restore I was downloading iTunes latest version and now have a main screen with iTunes logo  an arrow pointing toward that and a usb cable The iphone is stopped and i have tried to stop and restart the phone without success,Need a

    I am completely new to iPhone Have been trying to set up and use phone toi get some use out of it.
    So i am a 76year old dummy as far as iphone is concerned
    Can anyone tell me what has happened
    Started out updating iTunes and have ended up wiyh a phone that is jammed and failed to restore. So i am going nowhere.
    I know that i should have gone back to the store but not to mobile today so tried to do the job myself. Looked simple!!!
    Any advice on how i can get out of my predicament???

    You need to plug it into your computer running iTunes and restore it. Have you tried that? If so, what happened?

  • Which version do I have in my TX

    I feel stupid to post this but how do I find the version of Palm in my TX. I have clicked several different places trying to determine the verison in my TX so I can determine if I need to update. I have only had the TX for a short while and have it setup for mail and documents and music. Thanks in advance for assistance in locating my version.
    I am sure it is something simple I am missing but just cannot locate.
    Post relates to: Palm TX

    Glad you found it on your own! 
    As to your other question, it is moot - you are comparing apples to oranges.  There is no PalmOS Garnet (Operating System) update. 
    There is a newer version of "Palm Desktop" that has a version 6.2.2.    Palm Desktop is not an "operating system", but a piece of software that runs on your computer.  This changes nothing on your Palm device, but was created for the Windows Vista operating system.
    If you are not running Vista, there is no reason to install 6.x of Palm Desktop onto your computer...
    Hope this cleared up the confusion! 
    WyreNut
    Post relates to: Centro (AT&T)
    I am a Volunteer here, not employed by HP.
    You too can become an HP Expert! Details HERE!
    If my post has helped you, click the Kudos Thumbs up!
    If it solved your issue, Click the "Accept as Solution" button so others can benefit from the question you asked!

  • How do you identify which version Sansa you have while it's a brick?

    Got a 280R (Rhapsody), and I'm pretty sure it's version 1, but not positive. Couldn't restore it, so went to Recovery mode. I want to try and salvage it, but don't want to load the wrong firmware. Any ideas? Thx!

    There is only 1 hardware version (ver. 1) of the Rhapsody e200 player. The firmware can be found here.

  • Which version of the GX620 do I have

    Hey guys,
    I know I have a GX620, but how would i go about figuring out which exact version, mines the one without the turbo button. If you happen to know which version, does it have x64 support?

    Run CPU-z, then you can see the CPU flags.
    But as it's a very modern laptop, I would be surprised if it doesn't have x64 support.

  • Which model version do I have?

    iTouch PB533LL. Which version do I have?

    jmsfmtex,
    Use this article to help you determine what generation and model your iPod Touch is.
    http://support.apple.com/kb/HT1353
    B-rock

  • IOS 5: will I be able to download it without a connection to iTunes as I don't have a computer at the moment?

    I have an iPad 2 and want iOS5 when it comes out. But I just gave my MBP to my son who is in programming and needed it desperately.  Will I be able to download iOS5 without a physical connection to iTunes, which I don't have now?
    Thanks.
    Tom

    King_Penguin, thanks so much for getting back with me so quickly. You mentioned downloading it from a friend's computer. Is it just a matter of connecting to his comp via USB and transferring it to my iPad? How would Apple know to charge my account for the purchase?
    You'll have to forgive me. I'm up in years and not very savvy about these things!
    Appreciate your help.
    Tom

  • Can I revert back to old version of itunes from version 12

    I use itunes version 12 and have a nano 7th generation.  I recently upgraded my itunes to version 12 and have to say I don't like it.  Can I revert back to earlier version and how do I know what version I used previously?
    The main reason I would like to revert back is that I have encountered a problem that I never had previously with itunes.  Upon purchasing a song, when I try to copy it to my ipod I am getting the following error message :
    "(song name) wasn't copied to ipod because it is only available in icloud".   Since when did I do that?
    When I attempt to download from icloud I get the following error message "There was a problem downloading.  You do not have enough access privileges for this operation".
    What can I do now ??  Can I revert back and will this sort the problem?
    Many thanks

    The skin may never be made compatible.
    To downgrade to Firefox 3.6 first uninstall Firefox 4, but do not select the option to "Remove my Firefox personal data". If you select that option it will delete your bookmarks, passwords and other user data.
    You can then install the latest version of Firefox 3.6 available from http://www.mozilla.com/en-US/firefox/all-older.html - it will automatically use your current bookmarks, passwords etc.
    To avoid possible problems with downgrading, I recommend going to your profile folder and deleting the following files if they exist - extensions.cache, extensions.rdf, extensions.ini, extensions.sqlite and localstore.rdf. Deleting these files will force Firefox to rebuild the list of installed extensions, checking their compatibility, and reset toolbar customizations.
    For details of how to find your profile folder see https://support.mozilla.com/kb/Profiles

  • Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I inste

    Since I have the newest version of itunes, I can't back up like normally. The only way is to considilate files and then put them on an external drive which I don't have. Are there any other options? If I can't back up to a disc like I used to, can I instead just keep everything on my ipod and then if I have to get a new computer or something just download all my songs from the ipod to my new computer's itunes? Will that work? Will I still be able to keep all my songs that way?

    I'm going to assume the consolidating files does not work due to hard drive space limitations.
    Since you're moving to Windows 7, have you tried using the Windows files and settings transfer utility?  That will move everything for you to the same location on the new computer, it also allows some control over what actually gets moved.
    Alternatively, if you know the location of all of the media, it can be manually moved by copying it from the old computer to the new computer in the same location.
    Also, using the Apple article on moving the library, take a slight twist on what it says.  Move the iTunes library to the external drive, update the settings in iTunes to reflect the library being on the external drive, then consolodate it.
    The options are endless for moving the library... it simply takes a little effort to make it happen and possibly a twist on existing "standard" methods depending on your unique situation.

Maybe you are looking for

  • Ods value update

    Hi all, I have 2 ods'es ods1 and ods2. based on some value for a particular field in ods1 i need to update in ods2. basically i need to lookup in ods1 and update in ods2. any sample routine of how to solve this. thanks.

  • Using vision VIs from earlier VDM version

    I need to support some applications that have LV2010 with the Vision Development Module 2010 while my development PC has VDM 2012.  The VDM developers are frequently making new versions of the IMAQ functions AND  for some reason changing the name of

  • Photo Upload in ESS

    Hi, Please let me know configuration steps for photo upload in ESS. Thanks, Usha

  • Export to Excel with colored row

    Hi, I'm developing a alv report in web dynpro. The first  requirement is to put traffic lights based on some criteria. This part has been done. 2nd requirement is to export this alv report into excel sheet. If traffic light of the row is 'RED' then i

  • Sorting bug

    It isn't possible to sort images manually (after having sorted by date) within the Event view. I really can't believe that Apple didn't test something so crucial to this app. Not to mention they explain how to do it in the help section! The new iPhot