IUUC_REPL_CONTENT - How to apply filters and replicate for Cluster tables BSEG/CDPOS

Hello Friends,
I have replicated the transparent tables by applying filters in IUUC_REPL_CONTENT but I know it's different for Cluster tables.
Does anyone replicated the BSEG or CDPOS ?
I need some inputs on this folks.
Thanks in advance.
Regards
Raja

May be this is helpful - http://scn.sap.com/community/replication-server/blog/2014/02/25/how-to-filter-on-the-initial-load-parallelize-replication

Similar Messages

How many SECONDARY INDEXES are created for CLUSTER TABLES?

how many SECONDARY INDEXES are created for CLUSTER TABLES?
please explain.

There seems to be some kind of misunderstanding here. You cannot create a secondary index on a cluster table. A cluster table does not exist as a separate physical table in the database; it is part of a "physical cluster". In the case of BSEG for instance, the physical cluster is RFBLG. The only fields of the cluster table that also exist as fields of the physical cluster are the leading fields of the primary key. Taking again BSEG as the example, the primary key includes the fields MANDT, BUKRS, BELNR, GJAHR, BUZEI. If you look at the structure of the RFBLG table, you will see that it has primary key fields MANDT, BUKRS, BELNR, GJAHR, PAGENO. The first four fields are those that all cluster tables inside BSEG have in common. The fifth field, PAGENO, is a "technical" field giving the sequence number of the current record in the series of cluster records sharing the same primary key.
All the "functional" fields of the cluster table (for BSEG this is field BUZEI and everything beyond that) exist only inside a raw binary object. The database does not know about these fields, it only sees the raw object (the field VARDATA of the physical cluster). Since the field does not exist in the database, it is impossible to create a secondary index on it. If you try to create a secondary index on a cluster table in transaction SE11, you will therefore rightly get the error "Index maintenance only possible for transparent tables".
Theoretically you could get around this by converting the cluster table to a transparent table. You can do this in the SAP dictionary. However, in practice this is almost never a good solution. The table becomes much larger (clusters are compressed) and you lose the advantage that related records are stored close to each other (the main reason for having cluster tables in the first place). Apart from the performance and disk space hit, converting a big cluster table like BSEG to transparent would take extremely long.
In cases where "indexing" of fields of a cluster table is worthwhile, SAP has constructed "indexing tables" around the cluster. For example, around BSEG there are transparent tables like BSIS, BSAS, etc. Other clusters normally do not have this, but that simply means there is no reason for having it. I have worked with the SAP dictionary for over 12 years and I have never met a single case where it was necessary to convert a cluster to transparent.
If you try to select on specific values of a non-transparent field in a cluster without also specifying selections for the primary key, then the database will have to do a serial read of the whole physical cluster (and the ABAP DB interface will have to decompress every single record to extract the fields). The performance of that is monstrous -- maybe that was the reason of your question. However, the solution then is (in the case of BSEG) to query via one of the index tables (where you are free to create secondary indexes since those tables are transparent).

How to remove bullets and spacing for url links in the Related Links iview?

I tried to look for a property that I can edit the look-n-feel of the url links in the Related Link iView using "Theme Editor".
All I need is to remove the bullets and increase some vertical spacing between the links.
Currently, it looks like this:
URL iView A
URL Iview B
I go through the whole section of Related Links properties, none of them seems to do what I want.
Here are the list of properties in Related Link section (of Navigation Panel):
Link Color
Text Decoration of Link
Hover Color
Text Decoration of Hovered Link
Initially, I thought "Text Decoration of Link" should be the right property I should look at. But there are a drop-down with 5 options: None, Underline, Blinking, Overline and Line-Through, which really can't achieve what I want.
Thanks for advice.
Kent
Post with Diagram Illustration:
<a href="http://sapnetweaverforum.blogspot.com/2006/11/how-to-remove-bullets-and-spacing-for.html">How to remove bullets and spacing for url links in the Related Links iview?</a>
Message was edited by: Kent C.

Hi, Kai.
I checked the Related iView properties (URL Template), I don't see what layoutset it is really using. I am not sure, is that a layout set apply to the Related Link Iview?
For the regular KM iView, I will see what Layout Set I want to apply, then I can go and change the properties (of layout coontroller, collection renderer & resource renderer)you mentioned. But for this Related Link iView, I really don't know. I guess it may be in the code itself.
If there is a layout set for Related Link iView (or the place to apply layout set to it), can you point to me which one is that? (I did a search through the layout set names, I only find the AppQuicklinkExplorer (I used this for Dynamic Nav. Link iView before), if I can aply this layout set to Related Link iView, my problem will be solved.)
Thanks for help.
Kent

I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update

Dears at Apple:
I can't find how to apply sound enhancements (EQ) for the podcasts now with iOS 6.0 update on any of my devices(iPhone 4s, iPhone Touch (4th Gen), iPad (3rd Gen). Most of the "Podcasts" I listen to are music content based and wanted to apply sound enhancements(EQ) like before when integrated with ipod function. Can you consider to "fix" this issue?
Many Thanks!

OK Emanuel I found a solution! I dowloaded and installed "Denon Audio" app from the iTunes store & it works great! It has an EQ you can set curves on manually or use the (few) built in pre-sets. It is a player like the Music app that comes with the iPhone, etc. but restores the EQ functionality so we can adjust the audio of PODCASTS:-) Until Apple fixes this what I consider a bug I will be using the Denon app as my default music player!

How to find classtype and class for a material.

Hi,
How to find classtype and class for a material.
which table contains this data.
Thanks
Kiran

Hi Kiran,
Check below sample code. Use this BAPI which will give all info about the class for the material.
DATA:      l_objectkey_imp    TYPE bapi1003_key-object
                                     VALUE IS INITIAL.
CONSTANTS: lc_objecttable_imp TYPE bapi1003_key-objecttable
                                     VALUE 'MARA',
             lc_classtype_imp   TYPE bapi1003_key-classtype
                                     VALUE '001',
             lc_freight_class   TYPE bapi1003_alloc_list-classnum
                                     VALUE 'FREIGHT_CLASS',
             lc_e               TYPE bapiret2-type VALUE 'E',
             lc_p(1)            TYPE c             VALUE 'P',
             lc_m(1)            TYPE c             VALUE 'M'.
SORT i_deliverydata BY vbeln posnr matnr.
CLEAR wa_deliverydata.
LOOP AT i_deliverydata INTO wa_deliverydata.
    REFRESH: i_alloclist[],
             i_return[].
    CLEAR:   l_objectkey_imp.
    l_objectkey_imp = wa_deliverydata-matnr.
*Get classes and characteristics
    CALL FUNCTION 'BAPI_OBJCL_GETCLASSES'
      EXPORTING
        objectkey_imp         = l_objectkey_imp
        objecttable_imp       = lc_objecttable_imp
        classtype_imp         = lc_classtype_imp
*   READ_VALUATIONS       =
        keydate               = sy-datum
        language              = sy-langu
      TABLES
        alloclist             = i_alloclist
*   ALLOCVALUESCHAR       =
*   ALLOCVALUESCURR       =
*   ALLOCVALUESNUM        =
        return                = i_return
Thanks,
Vinod.

HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO

제품 : MFG_PO
작성날짜 : 2003-05-14
HOW TO FIND WF_ITEM_TYPE AND WF_ITEM_KEY FOR PO
===============================================
PURPOSE
This solution is for Oracle Purchasing 11 and higher
Explanation
1. Start a SQL*Plus session using the APPS schema.
2. Run the following script and enter the Purchase Order number that is stuck
in process when prompted for the PO_NUMBER:
     SELECT WF_ITEM_TYPE, SUBSTR(WF_ITEM_KEY,1,25) "WF_ITEM_KEY"
     FROM PO_HEADERS_ALL
     WHERE AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
3. If more than one row is returned, then run the following script and only
refer to the row that contains the OPERATING_UNIT_NAME that equals the
operating unit name tied to the responsibility used when the Purchase Order was
discovered as being stuck in process.
     SELECT SUBSTR(WF_ITEM_TYPE,1,12) "WF_ITEM_TYPE",
     SUBSTR(WF_ITEM_KEY,1,15) "WF_ITEM_KEY",
     SUBSTR(NAME,1,35) "OPERATING_UNIT_NAME"
     FROM PO_HEADERS_ALL PA, HR_ORGANIZATION_UNITS OU
     WHERE PA.ORG_ID=OU.ORGANIZATION_ID
     AND AUTHORIZATION_STATUS='IN PROCESS'
     AND SEGMENT1='&PO_NUMBER';
Example
Reference Documents
-------------------

Hi Kishore,
Welcome to SCN!
to find the sales order from Purchase order , go to SE16, Enter the table name as VBAK and press Enter.
In BSTNK field of VBAK, Enter the Purchase order number. System will return you corresponding sales order.
Hope this will help you.
Regards,
Nikhil

How to download drivers and software for hp pavilion dv6-3127tx . product unable to search

How to download software and drivers for HP Pavilion dv6-3127TX. Unable to search the product in help and support center.
Mohan Singh

Hi,
I can't find a listing for this model either, but you should find the drivers available on the link below work.
http://h20000.www2.hp.com/bizsupport/TechSupport/DriverDownload.jsp?prodNameId=4331848&lang=en&cc=us...
Regards,
DP-K
****Click the White thumb to say thanks****
****Please mark Accept As Solution if it solves your problem****
****I don't work for HP****
Microsoft MVP - Windows Experience

How to Apply YTM and MTD filter to the Query Calculating "Total Sales" Amt

Hi,
I got the requirement to calculate "Total Sales" amount in following format,
1. Calculate Total Sales YTM per Country
2. Calculate Total Sales MTD per Country
I am done with Queries to get Country wise Total Sales amount but stuck at the point, how to apply YTM (Year to Month) and MTD (Month to Date) filter. Can anyone have idea about how to apply YTM and MTD filter to query??
Regards,
Priyanka

Hi,
I got the requirement to calculate "Total Sales" amount in following format,
1. Calculate Total Sales YTM per Country
2. Calculate Total Sales MTD per Country
I am done with Queries to get Country wise Total Sales amount but stuck at the point, how to apply YTM (Year to Month) and MTD (Month to Date) filter. Can anyone have idea about how to apply YTM and MTD filter to query??
Regards,
Priyanka

How to create credit and debit for an account

Please tell how to create credit and debit for an account in currencies like EURO,GBP other than functional currency(USD).

hi,
You will find Dr and Cr entry for Both currencies which are functional & Transaction currency.
Regards,
Srikanth.Kura

How to find block free space and PCTUSED FOR THE TABLE

HI all,
Due to performance issues for my database , my management ask me to reset the PCTUSED and PCTFREE values , and my doubt is
1)How to find the current PCTUSED and PCTFREE values.
2)How to find block free space and PCTUSED FOR THE TABLE.
Please help me out regarding this.
Regards,
Vamsi.

1)version is 10.2.0.4
2)output of query
tablespace extent_management allocation_type segment_space_management
SYSTEM     LOCAL     SYSTEM     MANUAL
UNDOTBS1     LOCAL     SYSTEM     MANUAL
SYSAUX     LOCAL     SYSTEM     AUTO
TEMP     LOCAL     UNIFORM     MANUAL
USERS     LOCAL     SYSTEM     AUTO
UNDOTBS2     LOCAL     SYSTEM     MANUAL
INS     LOCAL     SYSTEM     AUTO
CONFTBS     LOCAL     SYSTEM     AUTO
REINS     LOCAL     SYSTEM     AUTO
ANALYST     LOCAL     SYSTEM     AUTO
BI     LOCAL     SYSTEM     AUTO
INTRFC     LOCAL     SYSTEM     AUTO
COGNOS     LOCAL     SYSTEM     AUTO
TS_INDX     LOCAL     SYSTEM     AUTO
TS_CHOLAWEB     LOCAL     SYSTEM     AUTO
TS_DASBOARD     LOCAL     SYSTEM     AUTO

How to get count of rows for a table?

Hi,
How to get count of rows for a table and secondly, how can i have access to a particular cell in a table?
Regards,
Devashish

Hi Devashish,
WdContext.node<Your_node_name>().size() will give you the no: of rows.
This should be the node that is bound to the table's datasource property.
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value); will select the row at that particular index.
You can access an attribute of a particular row as
WdContext.node<Your_node_name>().get<node_name>ElementAt(index_value).get<attribute_name>();
Hope this helps,
Best Regards,
Nibu.
Message was edited by: Nibu Wilson

REgd How to find appropriate data sourses for given tables in Inve Mngt

Experts!
M completely new to Inventory Mngt where i needto extract data from R/3,
they 've given me some tables, but i dont know how to find appropriate data
sourses for that tables
those are
MKPF,MSEG
EKKO,EKPO
EKBE,EKET
How to find right data sourses when table names given in any module??
pls guide me,
'll assign the points.
thanks
Srujan

Hi,
2LIS_03_BX is the initialization of your stocks; you'll need to perform the setup procedure for extracting this data.
Usually this DSource is used to bring the stocks positions at a given time; from this given time you'll then extract deltas from BF and UM so your stocks are always:
BX + BF(Delta) + UM(delta).
Hope this clears your doubts...
Olivier.

How to find out the link for the tables for sub contract PO

Dear All,
How to find out the link for the tables for sub contract PO, I am looking for the fields Material, Unit, Batch no., quantity.
Please provide the solution for the Table related to ABAP.
Thanks,
V.V.

Hi,
Make use of the table EKKO, EKPO...
For subcontract please select the option in EKPO-PSTYP.
Regards
GK.

Creation of sequence and trigger for each table!!!!!!!1

Hi
I am new to trigger and Sequence field. In one of my database we have many tables with fields for specifing ID numbers. Iam planning to insert the ID field with help of a Sequence and trigger...that trigger fires by adding the sequence value from the dual table. Now the point is here we r having around *60* table with ID field. And i am planning use the above process for each table by creating sequences and trigger for each table.
Will this affects the performance of database.
Is there any other option other than the above process, I mean other than creating sequences and trigger for each table.
PLzz help to resolve this issuee......
Shiyas
Edited by: user13170361 on Jun 7, 2010 12:37 AM

Tiger, I didn't mind about your comment, but the point is try to use
select NVL(max(a) + 1,1) into i from p1_temp;This line in your trigger code and see what is happening. The problem is with your trigger. You are using group by function and you will not get no_data_found !
For more help, this is some modification of your code.
SQL> create table p1_temp (a number(10) primary key, b number(10));
Table created.
SQL> create or replace trigger trg_p1_temp
2 before insert on p1_temp for each row
3 declare
4 i number(10);
5 begin
6 begin
7 select NVL(max(a) + 1,1) into i from p1_temp;
8 exception
9 when no_data_found then
10 i := 1;
11 end;
12 :new.a := i;
13 end;
14 /
Trigger created.
SQL> insert into p1_temp(b) values (1);
1 row created.
SQL> insert into p1_temp(b) values (2);
1 row created.
SQL> commit;
Commit complete.
SQL> select * from p1_temp;
         A          B
         1          1
         2          2
SQL> Edited by: Saubhik on Jun 7, 2010 2:30 AM

How to check the Statistics generated for a table through DBMS_STATS.

Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
Rajasekhar

Rajasekhar wrote:
Hi,
How to check the statistics generated for a Table through DBMS_STATS.GATHER_TABLE_STATS procedure ?
Please let me know.
Thanks !
Regards,
Rajasekharquery ALL_TABLES

IUUC_REPL_CONTENT - How to apply filters and replicate for Cluster tables BSEG/CDPOS

Similar Messages

Maybe you are looking for