IWeb '08 Hyperlink inspector useless and shadowed - Why?

I just upgraded to iWeb '08 and have a new website that my navigation menu items do not work correctly when published to the web. They are directed toward my .mac website instead of a page of my choice that is published in another folder and uploaded separately. And one of the menu items (ironically, the "links" page) doesn't even work properly in iWeb when I activate the hyperlinks.

Yes, the U Box is blue and I've tried a Publish All... makes no difference. Maybe I'll Publish to Folder, bring it into my Adobe Go Live and take a look at the code or re-instruct it to underline the hyperlink in normal mode.

Similar Messages

I just downloaded lightroom 5.6. Why do I have fill light and recovery but not highlights and shadows?

I just downloaded lightroom 5.6. Why do I have fill light and recovery but not highlights and shadows?

Your photo is using legacy processing version (2003 or 2010). Click the lightning bolt up near histogram, or use process drop-down at bottom in dev module (right panel, camera cal section) to use current processing version (2012).

USELESS ONLINE HELP FACILITIES For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.

USELESS ONLINE HELP FACILITIES
For all the amazing productivity aids that APPLE offers the world I have to report that their online support service is worse than useless and has recently been the source of immense time wasting and irritation.
Incident 1. Since many months attempts to download new and updated APPs produced a response – Apple ID Disabled. I had no time to consult an APPLE Store due to work in distant lands. When I finally visited yesterday I was told that as my IPAD has been reported as stolen, and APPLE in its wisdom had blocked its usage! I am not sure how they became so misinformed and nobody every advised me while with a few swift moves APPLE could have located me by email address or SKYPE.
Incident 2. Once the above anomaly had been fixed I tried to down load a newspaper and diligently input my address, credit card number and personal data. Repeatedly I was advised that my Credit Card was invalid and my postal code was incorrect! Really!
I was left to guess that having moved from UK to the US I should have advised APPLE! Not being told of this requirement brought about a second visit to APPLE Store in the same day to waste both mine and their time with a routine anomaly. How parochial in the context of a globalized world!
In each case I tried to resolve the issues using online access to a help line and by calling by phone at the numbers on the APPLE Website. In each of four separate occasions I diligently went through the routine and ended up with a message that thanked me for contacting Apple followed by a polite ‘Good Bye’!
In desperation I went to an Apple Store for the second time in a day as it is close to where I live when I am not working. On both occasions I was courteously attended to by Apple Staff.
However, my work is usually far away from the US and it is generally many thousands of miles to the nearest Apple Store therefore online help is viewed as imperative if one is to resolve issues away from home.
Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help? It would cost nothing in relative terms and might restore my high level of anti-APPLE sentiment that these two recent events have provoked.
Peter Hanney
Miami, Fl.

Why can Apple not provide a clearly marked EMAIL address and Telephone number at a Help Desk with real people to respond to requests for help?
If that is your question, the answer is at the bottom right of this web page. It is clearly marked "Contact Us" and is the best way, really the only way, to contact Apple.
If there were a publicly posted email address for concerns such as yours, it would be quickly filled with spam in about three minutes, thereby becoming instantly useless to you and everyone else. Apple would need to change it hourly, if not more often. That is also the reason you ought not to post your name, location, and what appears to be your iPad's serial number on this publicly viewable website.
Apple does not respond here and I can find no other questions for your fellow Apple users to answer.

Satellite L350D-216: Green lines, dots and shadows.

Hello all.
About three days ago, I purchased a laptop (Toshiba L350D, released about July '09 I believe) second hand on a good deal.
I turn it on today, to discover a series of weird green lines, dots and shadows, most of which make areas of text hard to read.
[http://i16.photobucket.com/albums/b30/philkensebben/Capture4.png|http://i16.photobucket.com/albums/b30/philkensebben/Capture4.png]
You can see them to the right of words and if you look close enough, also surrounding various letters in the Google logo.
[http://i16.photobucket.com/albums/b30/philkensebben/Capture2.png|http://i16.photobucket.com/albums/b30/philkensebben/Capture2.png]
Not especially clear here (sorry), but the greyed out words in the address bar are very ghosted.
Also, it appears to have replaced solid areas of colours like grey, with a 'dotty' green colour.
[http://i16.photobucket.com/albums/b30/philkensebben/Capture1.png|http://i16.photobucket.com/albums/b30/philkensebben/Capture1.png]
It appears this issue has also spread onto video, where areas of green are now appearing at random points.
[http://i16.photobucket.com/albums/b30/philkensebben/Capture5.png|http://i16.photobucket.com/albums/b30/philkensebben/Capture5.png]
I have updated the display drivers with the latest ones available from here, which sadly made no difference.
Any advice on why this suddenly decided to happen and how to get rid of it would be appreciated, I use the laptop for Photoshop and as you can imagine, having areas of green and shadows is rather off-putting when i'm trying to work.
Toshiba L350D
AMD Athlon X2 Dual-Core Ql-65 2.1GHz
4 GB RAM
250 GB HDD
Windows 7 Home Premium Edition 32 Bit
ATI Radeon 3100

If an external display (a monitor plugged into the laptop) shows no sign of the fault you can presume the the graphics chip is not at fault, after all it's working fine on the external monitor! If this is the case you don't need a new motherboard. I have repaired many graphic chip faults on laptop motherboards, and find that toshiba are usually quite good at not getting this type of fault.
I would suggest that the problem is more likely to be related to the cable that connects your screen to the laptops board (this is if the lines are vertical). Try moving the screen about on it's hinge and see if the problem goes, you can also slightly twist the screen and see if the problem goes. If you are not confidant to do the job yourself take it to a confident repair shop and they will be able to diagnose the problem. If the lines are horizontal it may well point to a capacitor problem which once again is not a new motherboard, just a decent repair centre which can identify the fault and repair it by replacing new capacitors on your board.
Hope this helps.

How can I change the default URL in hyperlink inspector

How can I change the default URL for link to external page in the Hyperlink Inspector?

You can't change the default url in the inspector.. but an easier way to do it rather than editing the box everytime you need to build a link is to copy the url you want to link to and then highlight the text or image that users will click on and then click enable hyperlink.. when you do that whatever the last url you copied using "command" "C" will automatically be entered into that box and replace "livepage.apple.com"
It saves alot of time if you are doing alot of links.
Hope This Helps!

Can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

can anyone help me with Magicjack? after I purchased US number I am unable to log in on my Iphone, I keep getting an error "YOUR DEVICE IS NOT ON THIS ACCOUNT" I contacted MJ support but they are very much useless and dont know how to fix it!

There's a whole lot to read in your post, and frankly I have not read it all.
Having said that, this troubleshooting guide should help:
http://support.apple.com/kb/TS1538
In particular, pay attention to the mobile device support sections near the bottom, assuming you have already done the items above it.

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid co

I have upgraded Apple Aperture from version 2 to version 3 and I'm having a problem with the "Highlights and Shadows" adjustment. According to the user's manual, I should have access to an advanced disclosure triangle which would allow me to adjust mid contrast, colour, radius, high tonal width and low tonal width.
If anyone has any suggestions as to how to access this advanced section, I'd be most grateful.

Hi David-
The advanced adjustments in the Highlights & Shadows tool were combined into the "Mid Contrast" slider in Aperture 3.3 and later. If you have any images in your library that were processed in a version of Aperture before 3.3, there will be an Upgrade button in the Highlights & Shadows tool in the upper right, and the controls you asked about under the Advanced section. Clicking the Upgrade button will re-render the photo using the new version of Highlights & Shadows, and the Advanced section will be replaced with the new Mid Contrast slider. With the new version from 3.3 you probably don't need the Advanced slider, but if you want to use the older version you can download it from this page:
http://www.apertureexpert.com/tips/2012/6/12/reclaim-the-legacy-highlights-shado ws-adjustment-in-aperture.html

Print quality for light gray gradients and shadows

Hello all,
I am putting together a single page flyer which will have light gradients and shadows on the objects.
Think Apple-ish light grays and shadows...
I would like to get an opinion here from someone in the know as I am much more of digital guy than print.
1) What is the lightest gray I can work with that would print well?
When setting up the CMYK color should I simply set it at say 10% 10% 10% 10% or is there some better mixture for light gray gradients. i.e. slightly blue for example, or rich black mixture.
2) When creating the gradients in illustrator, should I go from the gray to transparent or is it better to set up a gray to white gradient?
Finally,
When creating my supporting images with the shadows and gradients, would it be best just to create them in Photoshop and place them in my illustrator document and leave Illustrator for the text alone?
Thanks in advance, I really appreciate your help

Let's assume you are working in Illustrator. Here's my advice:
Hello all,
I am putting together a single page flyer which will have light gradients and shadows on the objects.
Think Apple-ish light grays and shadows...
"I would like to get an opinion here from someone in the know as I am much more of digital guy than print.
1) What is the lightest gray I can work with that would print well?
When setting up the CMYK color should I simply set it at say 10% 10% 10% 10% or is there some better mixture for light gray gradients. i.e. slightly blue for example, or rich black mixture.
- It should not be necessary to use 10% across the board. It comes down to how you want the shadows and gradients to appear. You ask what is the "lightest" Gray. That depends on the press and paper. Let's also assume you are planning for high end offset on a high end glossy "White" stock ( paper ). A 10% Black is fairly reasonable, but you could plan for 5%K ( again, depends on press and paper ). A nice warm Gray could be achieved with 7.5%C, 7.5%M, 7.5%Y, 0%K; a nice cool Gray could be achieved via 2.5%C, 0%M, 0%Y, 7.5%K. I would cross check a Pantone Process Color Guide for a reasonable choice. Do not rely on the monitor.
2) When creating the gradients in illustrator, should I go from the gray to transparent or is it better to set up a gray to white gradient?
- It should not be necessary to set your gradient to transparent. A typical scenario would be K > 0W; only specific requirements demand transparency.
Finally,
When creating my supporting images with the shadows and gradients, would it be best just to create them in Photoshop and place them in my illustrator document and leave Illustrator for the text alone?
- That depends on the file, the background, and a few other considerations. The key to shadows and gradients in Illustrator is they be applied as part of the final step in the file prep process. If you create the shadows, for instance, in Photoshop, the end file size may end up larger than you anticipated. And, the shadow would be resolution dependent ( less flexibility ).
Thanks in advance, I really appreciate your help"
Before you get started with your file, contact the print vendor to find out what type of press and what type of paper they plan to use on your job ( of you haven't already ). Don't forget to set your document resolution in Illustrator ( assumed ) and the Raster Effects resolution. Another important thing to remember is nail down the actual Gray ( i.e., lookup in Pantone Process Color Guide printed on the paper type you plan to use on press ).

With the new i0s7 update I can't delete the mail in my inbox all at once. I see there is the edit which allows you to mark all and to the right of that is MOVE and TRASH, why when you mark all you can't access these two options?

In the new ios7 update, why can't you mark all your messages in the inbox all at once? The EDIT tab lets you Mark All and off to the right is greyed out "move" and "trash", why can't you Select all and then press TRASH. It only lets you mark them as Flag, or mark as read. This *****!

Hi Scottay777,
Per pg 52 of the iOS7 User Manual, what you describe should be possible:
Delete, move, or mark multiple messages. While viewing a list of messages, tap Edit. Select some messages or tap Mark All, then choose an action. If you make a mistake, shake iPhone immediately to undo.
iPhone User Guide - For iOS 7 Software
http://manuals.info.apple.com/MANUALS/1000/MA1565/en_US/iphone_user_guide.pdf
If a button isn't responding correctly in Mail, you may want to try forcing it to close and then relaunch it. You may find the following article helpful:
iOS: Force an app to close
http://support.apple.com/kb/ht5137
Regards,
- Brenden

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because

The CC control panel use to show my 4 applications CC, CS6, LR5 and Bridge, now LR5 is no longer showing up. I pay for the photographer bundle, which includes LR5 and CC, why has it been dropped off? Is there any way to bring it back in the panel, because in the listed applications which can be added below it is not listed. Thanks!

If you're a paying Creative Cloud member, you may not see Lightroom in the Creative Cloud if your computer doesn't meet the minimum system requirements. Check to make sure that your system meets the minimum requirements for the latest release of Lightroom.
If you're using a trial version of Creative Cloud, the Lightroom trial is not available through Creative Cloud. It is, however, available as a stand-alone trial. See Install Lightroom trial | Creative Cloud membership.
Please refer to : Lightroom and Creative Cloud FAQ
Regards
Rajshree

Clip inspector in imovie not working properly - when I select a picture - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and in a clip the audio adjustment only shows a speaker? help

Clip inspector in imovie not working properly - when I select a picture (in project library) - and select clip adjustment it tells me that I need to select one or more clips to view Inspector tools and when I select a movie clip and then click on audio adjustments the audio adjustment appears as a speaker icon and I don't know how to get to the various audio options? It was working fine one minute and then I seemed to lose the functionality. Also editing a photo in a photo or getting rid of ken burns effect etc does not seem to work. help

Can anyone shed any light on this as I am having the same problem? One minute it works fine, the next you get the error message above.
Many thanks.

Preview highlight and shadow clipping mask in second monitor

Hi, I'm new in the forum and just starting with the new LR3. I have a question about to preview highlight and shadow clipping in the second monitor, becouse I can't check the mask clipping in my second monitor as in the LR2... Is there a possibility to change it to preview the mask in the second monitor?
Thanks and regards
Daniel

Yeah, thanks.... but I mean that when you are in develop mode and you try to see the highlight or black clipping mask, red or blue, now in LR3 only appears in the main monitor, not in the second monitor as well like in LR2... Maybe I'm not explaining very well the difference...

I keep getting a pop up stating "uninstall set" it keep coming up over and over, why?

I keep getting a pop up stating "uninstall set" it keep coming up over and over, why?

This issue can be caused by an extension that isn't working properly.
Start Firefox in <u>[[Safe Mode]]</u> to check if one of the extensions is causing the problem (switch to the DEFAULT theme: Firefox (Tools) > Add-ons > Appearance/Themes).
* Don't make any changes on the Safe mode start window.
* https://support.mozilla.com/kb/Safe+Mode
If it does work in Safe-mode then disable all extensions and then try to find which is causing it by enabling one at a time until the problem reappears.
* Use "Disable all add-ons" on the [[Safe mode]] start window to disable all extensions.
* Close and restart Firefox after each change via "File > Exit" (Mac: "Firefox > Quit"; Linux: "File > Quit")
In Firefox 4 you can use one of these to start in <u>[[Safe mode]]</u>:
* Help > Restart with Add-ons Disabled
* Hold down the Shift key while double clicking the Firefox desktop shortcut (Windows)
* https://support.mozilla.com/kb/Troubleshooting+extensions+and+themes

TS2167 I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

I am running OS X 10.8.2 and IWeb 3.0.4 (601) and everytime I try to publish my website I get an unexpected error and it does not publish my changes. My website is pretty simple, mostly made up of iPhoto albums in different categories.

Where are you publishing to? Can you publish successfully to a folder on your hard drive? Have you read this webpage: Publish iWeb site using FTP. It may have a clue to where the problem is.
A quick troubleshooting fix is
Try the following:
1 - delete the iWeb preference file, com.apple.iWeb.plist, that resides in your
User/Home/Library/ Preferences folder.
2 - delete iWeb's cache file, Cache.db, that is located in your
User/Home/Library/Caches/com.apple.iWeb folder (Snow Leopard and Earlier).
3 - launch iWeb and try again.
NOTE: In Lion and Mountain Lion the Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
However, when you delete the preference file you probably will have to use the app described below to select and open your domain file with iWeb:
In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible enter the following in the Terminal application window: chflags nohidden ~/Library and hit the Enter button - 10.7: Un-hide the User Library folder.
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder. So rename your domain files once they've been created to something other than the default name.
OT

Aperture sometimes slow import slow reaction on highligts and shadows

1. Aperture sometimes, one out of three times perform a slow import from a compactflash card. Normally 10 images (nikon d-200 10 mb) in less than a minute. Sometimes the same ammount takes more than 5 minutes. Reconnecting the cardreader on the front usb connection solves the problem.
2. Using the sliders on highlights and shadows, the adjustment of image takes a little time, no instant reaction.
3. Aperture is installed on a 250 gb hd (first) (standard installation version 1.5.2). The data is installed on a second 500 gb internal drive. Drives never go to sleep. 4GB internal ram. Video card 7300 GT.
I have talked to different people about this performance issue and got different answers, which range from:
a. This is the best performance with aperture with the current system. If you want more buy a better video card.
b. Your video card is bad, mainly the vram. Replace the video card (warrenty still applicable).
Any views and advice from this forum?
Regards
iemke

Mac OS X 10.4.9 to boost image import speeds
By Prince McLean
Published: 09:35 AM EST
Apple this week dropped yet another pair of pre-release Mac OS X 10.4.9 builds on its developer crowd, inching the software closer to a public release.
The diligence with which the Cupertino-based company has been refining the software may signal that Mac OS X 10.4.9 will be the final maintenance update to Mac OS X 10.4 Tiger before attention is drawn solely to Leopard.
As was the case with prior seeds, developer notes accompanying the latest builds -- 8P2132 (Intel) and 8P132 (PowerPC) -- are said to reflect no known issues with the software.
People familiar with the latest pre-release say Apple notes just one significant change since builds 8P2130 and 8P130 were issued last week, specifically a bug fix to ImageIO that was affecting image import speeds.
This is from Apple Insider.
Jeff

IWeb '08 Hyperlink inspector useless and shadowed - Why?

Similar Messages

Maybe you are looking for