IWeb on macbook pro with mavericks cannot import old iWeb files from time machine back up

Hi! The apple store completely wiped my macbook and installed mavericks. I made a time machine back up before bringing it in to be completely wiped. Computer had bad software so they recommended me to handpick items and bring them over to new operating system without completly putting the entire time machine back up on it.
So I did but my only concern is Iweb. Now I got Iweb back installed in mavericks I cannot seem to import any files from my back up to my application in my renewed computer with mavericks. I searched for .domains, sites and sites2 but I cannot extract anything and I still have some old websites stored with Iweb and use the application quite a bit...
Can anyone help?
Thanks a million....

Not sure what you mean by extract but this might help;
If you're running Lion or later the Home/Library folder is invisible and that's where the domian files are located.  That folder will be invisible in the TM backups also.  Therefore  you can extract Domain files one at a time out of the TM backups for import into iPhoto.  You would do it as follows:
1 - download and run Find Any File to search for a file named ".site".
FAF can search areas that Spotlight can't like invisible folders, system folders and packages.
2 - the search can take a while due to the structure of the TM backups.
3 - select the backup from which you want to recover the Domain file.
4 - drag the file from the search results window to the Desktop.
If you recover more than one Domain file be sure to rename them after dragging to the Desktop so that you don't overwrite one with the next.
5 - you can put the Domain file(s) in your Home/LIbrary/Application Support/iWeb folder but will have to make the library visible as follows:
NOTE: In Lion and Mountain Lion the Home/Library folder is now invisible. To make it permanently visible in Lion or Mt. Lion enter the following in the Terminal application window: chflags nohidden ~/Library and press the Return key - 10.7: Un-hide the User Library folder.
For Mavericks, 10.9,  go to your Home folder and use the View ➙ Show View Optionsmenu to bring the this window:
To open your domain file in Lion or Mountain Lion or to switch between multiple domain files Cyclosaurus has provided us with the following script that you can make into an Applescript application with Script Editor. Open Script Editor, copy and paste the script below into Script Editor's window and save as an application.
do shell script "/usr/bin/defaults write com.apple.iWeb iWebDefaultsDocumentPath -boolean no"delay 1
tell application "iWeb" to activate
You can download an already compiled version with this link: iWeb Switch Domain.
Just launch the application, find and select the domain file in your Home/Library/Application Support/iWeb folder that you want to open and it will open with iWeb. It modifies the iWeb preference file each time it's launched so one can switch between domain files.
WARNING: iWeb Switch Domain will overwrite an existing Domain.sites2 file if you select to create a new domain in the same folder.  So rename your domain files once they've been created to something other than the default name.
OT

Similar Messages

  • I just bought the latest Mac mini i5 but every time I try to transfer my files from time machine back-up of my mini mid 2011 model I always come up with some sort of problem?

    I am so fed up with using time machine to restore my files from my previous mini. I have tried several different ways and every time there is some sort of problem. I just want to restore it back to the original setting and manually reinstall my  personal software. My question is: Is it better to reinstall osx using the recovery drive or downloaded from the app store. Also if you have already reinstalled from the app store does that effect the recovery drive?

    It does not make any difference it you reinstall from recovery partition or app store since in either case the OSX install files are downloaded from Apple servers.
    What problems (error message?) are you gettng whenb trying to restore form TM?

  • I have a cd rom for my italian class, which I cannot open on my macbook pro with mavericks installed, someone said I need Rosetta! Help please

    I have a cd rom for my italian class, but am unable to load it on my macbook pro with Mavericks installed.
       Someone has said i need Rosetta, but understand that Apple stopped installing this!1
      Can anyone suggest anything to help me??

    Many educational CDs have not been upgraded due to lack of funds in the educational market to pay for the such updates.
    This situation is due primarily to the fact that one of the major political parties in this country favors tax cuts to the rich while cutting federal educational support funding (or eliminating the federal Department of Education altogether).
    However, you can restore Rosetta and run your educational CD if you install Snow Leopard Server ($20) into Parallels (up to $79) for use in Lion/Mt. Lion/Mavericks:
                                  [click on image to enlarge]
    More information here:
    http://forums.macrumors.com/showthread.php?t=1365439

  • How to mount iPhone 3gs on a macbook pro with maverick ?

    how to mount iPhone 3gs on a macbook pro with maverick ?

    There are unsupported mechanisms of doing what you want. You can search for iTunesFS.
    Garage Band should allow you to send Ring Tones to the 3GS via iTunes - GarageBand '11: Send an iPhone ringtone to iTunes  

  • I am trying to find an app or software to burn iMovie slideshow to a dvd.  I have a MacBook Pro with Mavericks.  There are a lot of DVD Creator apps a the App store. Looking for a recommendation of what to use and tips.

    I am trying to find an app or software to burn iMovie 11 slideshow to a dvd.  I have a MacBook Pro with Mavericks.  There are a lot of DVD Creator apps at the App store. Looking for a recommendation of what to use and tips. Thank you.

    I've been using "Burn" for years and it has been the only DVD burning software I have ever used for the mac. I have never needed to look at other apps. Unless you want something that has more bells and whistles such as Roxio's "Toast" : http://www.roxio.com/enu/products/toast/pro/overview.html
    There are thousands of quality free apps out there for the mac that are not part of the App Store. All you have to do is read reviews online, do a little search, the Apple forums are full of recommendations from experienced users that have been here for years...

  • Where are the backup files for my iPad located on my macbook pro with maverick ?

    where are the backup files for my iPad located on my macbook pro with maverick ?

    As an addendum, if I need to, and hopefully won't, unless I switch computers, how can I revert from a copy of a different backup?  Thanks. :-)

  • I can't find my printer driver on my macbook pro with mavericks......

    I can't find my printer driver on my macbook pro with mavericks......

    Hello kenhale26,
    Thanks for using Apple Support Communities.
    For more information on this, take a look at:
    OS X: Printer and scanner software available for download
    http://support.apple.com/kb/HT3669
    Apple delivers third-party software for scanners and printers using Software Update.
    Best of luck,
    Mario

  • Everything on my Macbook Pro with Mavericks runs very slowly

    I have a 13" macbook pro with Mavericks operating system, and it is only a little over a year old. In the last 2 or 3 months everything on the computer has been running incredibly slowly.
    I first noticed it when streaming online videos, the audio would be several seconds ahead of the video, but the lagging has started everywhere else too. When I type the text appears several seconds after it has been typed, it takes much longer than it should to scroll down webpages and the cursor often freezes, I have even noticed a very long lag switching between webpages or applications.
    I have very few things saved on this computer, just some Word documents and pictures. I did have Sims 3 installed but I uninstalled it thinking it may be the problem.
    I have also noticed a very audible metallic plinking noise that could be unrelated. It started ] maybe 2 months before the lagging did and sounds like it's coming from the bottom right hand corner of the computer. I'm considering resetting my computer to factory settings because I haven't been able to find anything to fix this issue.

    The hard drive is located in the bottom right of your model and I experienced a very similar issue twice in less than a year of purchase. I suggest you back all your data up as soon as possible as it may be the signs of a hard drive beginning to fail. My symptoms were it would take longer to start up and I would get the spinning ball when I secondary clicked. Before it would fail, I would try and repair errors found in disk utility and it would say it could not be repaired, back up as much data as you can. By that point, it was too late to back anything up. From there, I would get a loading bar on startup and once it loaded, it would shut down.  But it could be a less serious issue as well. It could also be the SMC, PRAM, or errors in your hard drive's coding. But before you follow these steps, back all your stuff up that you want or need in case it is your hard drive. Boot the machine into recovery mode by holding in command and r as soon as you turn it on. After it loads, you should get a box to pick your language. Select your language and select disk utility. In there, click Macintosh HD and verify the disk. If anything appears in red text, there are errors that need to be fixed. All you have to do is click repair. If it says they can't be repaired and to back up your data, your hard drive may have failed. To reset the SMC, plug in the mac and shut it down. On the left side, located the control, option, and shift keys. Hold those down along with the power button. Hold it for a few seconds and let them go. It's normal the machine won't turn on and the light on the charger will change state. Next, reset the PRAM. Shut down the Mac and located command, option, P, and R on your keyboard. You're going to turn on the Mac and as soon as you do so, hold those four keys down. It's going to shut down immediately but keep holding them in. It will turn on and make the "bong" noise like it normally does. Let it cycle about two or three times and let the keys go and wait for it to start up.
    I hope this helps and good luck!

  • How to setup  wifi Epson stylus SX 435W printer and scanner on macbook pro with mavericks

    how to setup  wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
    please help

    mukhi23 wrote:
    how to setup  wifi on Epson stylus SX 435W printer and scanner on macbook pro with mavericks..that is printer works recognise comptuer but when it comes to scan error shows as comunication error occured
    please help
    Read the user manual that came w/the printer/scanner, contact Epson to see if you need to update your scanner drivers to work in Mavericks also check Software Update.  Check out the following links: 
    http://support.apple.com/kb/HT3669 Printer and scanner software available for download 
    http://support.apple.com/kb/PH14141 OS X Mavericks: Reset the printing system
    A scanner driver you may wish to consider:  VueScan Scanner Software

  • My laptop macbook pro with maverick was working well with AVERTV VOLAR a dongle to capture tv programmes but now with yosemite it does not recognise what options I have

    My laptop with macbook pro with maverick was working fine with a dongle AVERTV VOLARGO to capture tv programmes but now with yosmite it does not recognise what options have

    I also understand that there is particular software 'TRIM' a software introduced by CINDORI SOFTWARE which will disable KEXT SIGNING a security application of YOSEMITE ,Is it the only option or there are any better options for this

  • Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Why my MacBook pro with Maverick, when I'm connected with internet key and connect with usb cable my HTC One the Mac restat with error?

    Solution may be found if you search in the "More Like This" section over in the right column. 

  • Just got a new Macbook Pro with Maverick. In Mail, how do you get the format bar to show?

    Just got a new Macbook Pro with Maverick. In Mail, how do you get the format bar to show?

    You are still under warranty.  Call Apple Care. Make sure you get a case number as all repairs have an additional 90 days of warranty. 
    #1 - You have 14 days from the date of purchase to return your computer with no questions asked.
    #2 - You have 90 days of FREE phone tech support.
    #3 - You have the standard one year Apple warranty.
    #4 - If you've purchased an AppleCare Protection Plan, your warranty last for 3 years.   You can obtain AppleCare anytime up to the first year of the purchase of your computer.
    Take FULL advantage of your warranty.  Posting on a message board should be done as a last resort and if you are out of warranty or Apple Care has expired.

  • Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

    Hi! is it possible that Logic X has upgrades that work only with mavericks and does t work in mountain lion....since in my macbook pro with mavericks i have new views of the equalizer, etc and in my mac pro with mountain lion it still the old view...

    Any OS version of 10.8.4 or later has all features that are not OS depended. The plugins are one example. You probably haven't updated all versions of Logic Pro X to the latest one.

  • I can no longer shoot directly into phaseone software since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    i can no longer shoot directly into phaseone software - neihter version 6 or 7 - since i use my new macbook pro with retina display. pictures are not transfered from the camera into captureone. anyone else with this problem? any solutions?

    My eyes just glazed over...Please in the future break down each of your issues with paragraphs separated by two carriage returns. It would be much easier when trying to address your issues.
    Go to Apple menu -> System Preferences -> Keyboard and Mouse -> Mouse
    And edit your mouse settings to do what you want it to do.
    Secondly, this is not the place to vent. If you have a complaint, there is:
    http://www.apple.com/feedback/
    or http://www.apple.com/contact/
    We are just end users here helping other end users.
    Third, from my understanding, it would appear you are concerned about the noise the hard drive makes when it falls asleep? Why not put your machine in screen saver mode instead? Apple menu -> System Preferences -> Energy Saver turn off all Energy Saver settings, or set them to run Never.
    Fourth, if your machine was purchased just a few days ago, you may still be able to get an exchange from the store, quicker than you can get a repair done. You may want to look into that possibility.
    Fifth, it does appear you found the Logic forum. I would persist in asking there how to solve your technical issue with Logic regarding the audio. It may be you don't have to do anything special to the hard drive. Remember audio can be transmitted by wire, avoiding ambient sounds.
    Good luck!

  • Bought referbished macbook pro oct 2011 version, just set it up using time machine and quicklime pro has disappeared. I have quicktime but not quicktime pro. Any ideas? thanks!

    bought referbished macbook pro oct 2011 version, just set it up using time machine and quicklime pro has disappeared. I have quicktime but not quicktime pro. Any ideas? thanks!

    Try, in preferences, resetting 64 bit to 32 bits.  Should work fine.  the older vidoes, etc will not work with 64 bit.  Had the same problem/scare.  Let us know if this helps and works!

Maybe you are looking for

  • Vendor Upload by conversion program

    HI Experts , I am uploading vendor master data by conversion program , in that due to 1 field in Control data(customer - KUNNR ) I am unable to upload vendor. In this field when i give the customer number which is already referenced for another vendo

  • Exchange Rate from Exchange Rate Table

    Dear All, Is there any way to make the system to take the exchange rate from the Exchange Rate table and not from the base document when we are "Copy To" functionality instead of "Copy From"? I unchecked "Use Document Exchange Rate When Copying to Ta

  • Flash player not recognised?

    I'm on a website that contains videos that require Flash player to run. I'm getting the message "Flash 7 or above is required to view this content" in the space where the video should be. I have installed Flash Player 9 two or three times but it keep

  • Nokia E6 belle update

    hi all, someone should please advice. Is it safe to update to nokia belle. Cause all i heard about the belle aint good. Some fellow e6 owners pls advice. Thanks Solved! Go to Solution.

  • How do I disable SCC (spread spectrum clock) in Macbook Pro?

    On some PC's I can hit a key during startup, go into a BIOS setup menu, and find the option to disable spread spectrum on the system clock.  How can I do this on my Macbook Pro? Thanks.