IWeb publishes page but doesn't save it

I make changes to iWeb, save, publish, and then when I open iWeb again - all those changes are gone! The published site is OK, but if I want to update again, I have to put in all that old stuff.   This only happens randomly - and usually when I type a lot of stuff!
www.askmissreid.com
If you go to "AVID" - all of those boxes have a file in them, but when I open iWeb, that is not the case.

I seem to remember another person having this problem recently and I don't think the question had a satifactory answer.
I think I would begin to suspect that the problem may be in the Domain file. You could start with a blank one and copy over some of the content from the original, add some new stuff and see if this saves OK.
There's a download link for a blank domain file on this page...
http://www.iwebformusicians.com/iWeb/iWeb-Tips.html
You can launch two versions of iWeb to speed up the copy/paste process.

Similar Messages

  • I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    I am creating a form, it shows 1 page, but when I save it as a PDF Form there are 2 pages, 1 is blank. How do I get rid of the blank page in the form?

    Hi,
    You may open the original form in FormsCentral and toggle to “Page View” at the lower right corner. Adjust the page content to make sure no page breaks in this view.
    Thanks,
    Wenlan

  • My iPod syncs, but doesn't save ANYTHING on the iPod

    Basically, my iPod syncs, but doesn't save ANYTHING on the iPod, its the first iPod I have used and it really annoys me... I have tried pretty much everything :@
    Help?!

    Hello JellyPopJade,
    And welcome to Apple Discussions!
    How do you have your iPod configured to sync with your iTunes library? Automatically or do you manually manage its contents by dragging what you would like from your library to the iPod.
    If you have it set to automatically sync all checked songs and videos, make sure each track you wish to sync to your iPod is checked within your iTunes library.
    Under the Summary tab for your iPod, is there any space taken of by the "Other" category (orange)?
    B-rock

  • Published an iWeb 09 page, but it views blank

    I've published my family's website for a year now without any major issues (iWeb 08 and 09). I recently added a blog to the site and all pages, but one, open okay. The one page for some reason opens blank. I've deleted it, re-posted it, made little changes here and there, but nothing seems to work for this one page. Frustrating. Any ideas out there?
    Eric
    Message was edited by: massnative

    Sorry about that....
    The initial Blog page is http://www.wartels.com/EricWartel/Blog/Blog.html
    The blog with the issue is http://www.wartels.com/EricWartel/Blog/Entries/2009/5/8%22The_Girl%E2%80%99s%22_BostonTrip.html
    I've noticed that the other blog entries don't have all of the '%' signs in the URL. Is that an indicator of the issue?
    Thanks.

  • IWeb publishes updates but does not upload in the FTP

    HELP!    
    I have a 'tried-tested-true' website that's been on the internet for 10 years. It's been updated over the years but needed much more as of today.
    The updates perfectly publish within iWeb [3.0.4]. The FTP uploads the site, but when I check it on the internet [Safari 6.2.3], the former version appears.
    I proceeded to troubleshoot by renaming the website and re-mounting the pages. Also, renaming the pages, but after several attempts of uploading each newer version, all efforts were to no avail. It has taken me a full day without results. That is, the original website remains on the internet, which is very outdated.
    I have run out of troubleshooting ideas. All of my other websites have not had this problem. There was an issue this week with the ISP Domain Host services not connecting my site. I contacted them, but have had no response. However, I thought I would try connecting again today in case they sorted out their connectivity issues. I am able to connect to their server. I have good reason to believe the FTP is uploading the updated directory files, but for some reason when it comes to viewing the site on the internet, au contraire.
    Not sure if this is an iWeb problem or my ISP domain hosting services having issues with connectivity. Whatever, it is very perplexing to me as to what to do next after the extensive amount of time I have taken troubleshooting.
    I repeat myself when I say, 'HELP!'

    Okay, I understand what you are referencing. I am publishing my websites to the path of 'Users'-Documents-Website Documents.
    Below is a screen shot of the folder my Websites are located. Is this what you are referencing? It is Site 2 that is having issues with uploading to the domain host server of my ISP. All the other sites have been uploaded successively.
    I use FileZilla as my FTP server and it has been excellent. I have tried CyberDuck, et al. FZ works perfectly well indicating all that one needs to know while uploading. If my other websites were causing the same issues, then it would mean FTP issues.
    However, I believe I am on the same track you are referencing with regards to my published website is in the appropriate location on my HD. I stand to be corrected.
    I believe by my contacting the Forum and reading your information that I am following protocol as I have always done with my 4 websites that upload properly. As I continue the discussion, it is becoming evident the issue is with the Domain Host server, which is not a problem to post on this Forum.
    However, I posted my issue just in case it was an iWeb issue or my not following protocol correctly to publish a website. From what I am gleaning with your information, I am following protocol. Repeating myself when I say it appears to be the aforementioned server. I have contacted them again about their Domain Host server but no response as yet.
    If what I am presenting to you is the correct protocol I have in place at my end, I thank you for taking the time to assist me. By doing so, I believe I will be able to determine it is not an iWeb publishing issue [mostly because all my websites are not experiencing this problem], nor is it the FTP server,FileZilla, but the Domain Host Server.
    As mentioned above, here is the folder where my websites are located.
    I so appreciate your assistance.

  • IWeb published Pages - deletion of

    How do you DELETE iWeb created pages that have been published to a MobileMe Web Site Account?

    If the pages have been deleted from iWeb then do a File ➙ Publish Entire Site with iWeb and it should remove the pages online.
    OT

  • Why does the form link show up in 2 pages, but when I save the form as PDF it comes up as 3 pages?

    A few weeks ago, I asked the above question on why the form link shows up in 2 pages, but when the form is saved as PDF it comes up as 3 pages.
    The answer I received was that I can simply select the page break and hit "delete" button or click on the trash can icon at the top right corner.
    I tried to do this but, there is NO OPTION to select the page break and hit delete….
    I want to combine the page on my PDF because the header takes up one entire page.
    How can I do this? Can someone please help or walk me through this live?

    Wenlam,
    There is NO OPTION to select the page break and hit delete….
    Please see.
    I want to combine these page because the header takes up one entire page. 
    How can I do this?
    Trent
    Thank you,
    Trent
    Trent R. Smock
    602.359.2685
    You want to improve? Interrupt your "old patterns."
    Do something different.

  • After a recent upgrade, now when a use a link from a website (eg a photo from autotrader) it opens a blank page but doesn't go to the link page. I tried removing Firefox and reinstalling but no difference. Can anyone help?

    I've tried it on many sites but always the same result, a new page but no detail. The header details says "search bookmarks and history". Very strange

    Do you have that problem when running in the Firefox SafeMode? <br />
    [http://support.mozilla.com/en-US/kb/Safe+Mode] <br />
    ''Don't select anything right now, just use "Continue in SafeMode."''
    If not, see this: <br />
    [http://support.mozilla.com/en-US/kb/troubleshooting+extensions+and+themes]

  • Emage fil on web page but doesn't show in iWeb

    I cheat! I will set up a web page then duplicate it over and over again so I get my standard layout. On the first page I placed an image. Duplicated the pages, then removed that image from them all. At least in iWeb. However, when I publish the site the image appears on the pages. So, back to iWeb and its not there. Using Dreamweaver I go into the code and lo and behold it is all there. So I can remove it and reload it. But its still change the fact that the master file in iWeb has it stored in the belly of the beast. How do I get rid of it from iWeb?

    Delete the images, quit iWeb and do a restart.
    Restarting dumps out all the redundant files from iWeb, Keynote etc.
    One of the bugs in iWeb '09 is with it not saving some hyperlink changes. The only way I can get them to stick is to delete, quit, relaunch and add the new one.
    Another triumph for the iWeb programmers!

  • How can i edit Iweb published page to open as a Popup?

    I want to edit my iWeb site so that when a link is clicked it opens a different page as a popup with no other toolbars, scrollbars etc - just the image i want to show.
    I found some code online (http://www.quackit.com/html/codes/html_popup_window_code.cfm)  that does this in javascript, but i do not know where in the html file this would need to go for it to force that page to open as popup.
    I have text wrangler so i can edit and save the file in the right format again.
    I need to be able to set up various different triggers on a web page - Its a single photo image but i want to be able to open different pop-ups depending on where the viewer clicks. I tried using a blank shape (no fill, no stroke) along with an html snippet widget. This triggers the pop-up as i want, but it also places a definite empty box over the image. I need this to be invisible.  I have also read that the snippet widget is not the mpst reliable way to add code at specific places on the page.
    Hence i think the best way would be to insert code into the actual page that instructs it to open as popup.
    Please can someone advise me the best way to go about editing the code to get this result?
    thanks
    adam

    thanks for the suggestions...
    unfortunately, i don't understand the code enough to figure out what i need. The pop-ups you show are exactly right, but they are being triggered by smaller individual thumbnails.
    That is not what i want - i need to have various trigger points for different pop-ups, placed at diferent places on a larger single image.
    Imagine a photo of a crowd - each person when clicked on would open a popup showing a specific image. Its not a regularly laid out grid - and the trigger points need to be manually positioned.
    I have created a blank page with the same dimensions as the graphic it contains, then published this from iweb. When i link to this it opens the page as a docked page, with all the navigation bars, scrolling bars etc, as well as a large area of empty white page below the image.
    My question is really how do i edit the code of the graphic page so that it only pops open the graphic when its accessed. Surely the relevant code for that would be embedded in the page itself, and not the link that connected to it?
    thanks for your patience!
    adam

  • Really low resolution on iWeb-published pages

    Certain photos I've uploaded are REALLY low resolution while others are not. I can't find a common reason as to why. All the photos are from the same camera at the same original resolution. Ones with a distinct black border are the low-res ones. I've seen others with this problem. Does anyone have a solution?
    Thanks
    -Matt

    Matthew Hi - 3 things and a possible solution :
    1. "Really low resolution" - be careful what you're saying here. An image 60 pixels by 60 pixels at 72 dpi and an image 2000 by 2000 pixels at 72 dpi have IDENTICAL RESOLUTIONS - i.e. 72dpi. It's just the dimensions which are different. High resolution means anything toward 300 dpi whatever the dimensions of the image. I bet if you look at the images you say are "really low resolution" you'll see that they are 72 dpi (iWeb does that automatically) but that the image size is really small. The pixelised effect is because iWeb is taking an image smaller than the size reproduced on the page. I think I know why.
    2. My deductions : be careful of the .TIF extension. Some cameras use this extension for RAW files (confusing I know). But not knowing how to read such a file iWeb may actually only be importing a 'preview' of that file. Hence the upsizing and pixelising that's going on.
    3. Solution. Change your files to JPEG before dragging in as suggested elsewhere in this post and upload those. IMPORTANT ! Many iWeb users have had trouble with the same images being used despite renaming, reuploading etc. In reality if you drag a new file in to iWeb with the same name despite having made changes to that file, iWeb seems to always want to show the original.
    Here's the fix - You need to DELETE the old files from the iWeb Domain folder. I previously posted a comment concerning 'saving' in iWeb. Publishing does not 'save' your site in the same way as the standard command-S save. What you want to do is get rid of all the dodgy pics in your 'Domain' folder. iWeb stores all your site files in a package called 'Domain' :
    Users>Library>Application Support>iWeb>Domain.To access the 'Domain' folder click right and click show all package elements.
    In iWeb remove/delete all the bad pics. Now do a command-S save. In principal you have just removed these images from the Domain. Go to the Domain package to check. You can also quit iWeb and reopen. You can also delete directly from the Domain.
    Now import your new images.
    I hope that works
    PA

  • IWeb published page length short on remote files??

    I have multiple domains I publish to a folder. Then I upload with cyberduck. Recently I have uploaded a website generated in iWeb 08 and when I view online the page length is short both in safari and firefox. I was wondering if anyone had any suggestions.
    I have gone back into iWeb and verified the content height, and additionally verified the tags by viewing them in adobe dreamweaver and the remote files are tagged correctly.
    Just to be sure I downloaded the page and the remote files to my desktop, and they view at the correct length.
    Again when I view the pages online they are short meaning I can not scroll to the bottom as the page ends prematurely. There is more content just can not scroll down that far, additionally the scroll bar stops correctly (at the incorrect length).
    Thank You in advance -
    Herb

    I replied only to Ethmoid's response not to the entire thread, as I should have. My bad.
    Here's my reply to your replies:
    I uploaded the folder Robert Wells Fine Prints, which contained both the index.html file and the Robert Wells Fine Prints folder created by iWeb when I published. In Cyberduck, I uploaded them to the public_html on Small Oranges servers.
    I uploaded the whole RWFP folder created by iWeb all at one time.
    Ethmoid asked: "How did you manage to get a php file when iWeb does not support this? If you have created your site in iWeb, you welcome page should be Welcome.html and nothing like php."
    I have no idea how I did this, but it looks like I screwed it up pretty good. Could it have anything to do with the fact that at some point in this process (not sure when) I changed the site's name. Originally, I was going to call it Robert's Fine Art Prints, but that got changed to Robert Wells Fine Prints. Though I have no idea if this has anything to do with my current problem.
    Things have gotten worse. Thinking I did something wrong & could fix the problem by re-uploading, I deleted the files from the server and tried again. Now, most of the image files are failing to upload in Cyberduck.
    Chuck Usher asked "When you publish to a folder I believe you get a folder and a separate index.html file. did you up load both and address the index file? What is the site address? "
    Yes, you get an index.html and a folder of supporting documents. I uploaded both at the same time. The address is supposed to be robertwellsfineprints.com but it doesn't work.
    Thoughts appreciated.
    Robert

  • IWeb published "page not found"

    I've created a site in iWeb 2, published to a folder on my desktop & uploaded it to A Small Orange's web servers using Cyberduck. But when I try to view the site with either Safari or Firefox, I get the dreaded "404 page not found" message.
    Tech support at A Small Orange is not especially helpful & said "The problem is that your index.html redirects to a file welcome.php in the RobertsFine_ArtPrints folder. the welcome.php files does not exist."
    I asked what can be done about this & they said "If the files were generated by IWeb then you need to ask them why your files are not setup properly.
    Im sorry but there is no way that we can give you code that we do not have. This issue lays with your your site is coded."
    Any ideas what I'm doing wrong?
    Thanks,
    Robert

    I replied only to Ethmoid's response not to the entire thread, as I should have. My bad.
    Here's my reply to your replies:
    I uploaded the folder Robert Wells Fine Prints, which contained both the index.html file and the Robert Wells Fine Prints folder created by iWeb when I published. In Cyberduck, I uploaded them to the public_html on Small Oranges servers.
    I uploaded the whole RWFP folder created by iWeb all at one time.
    Ethmoid asked: "How did you manage to get a php file when iWeb does not support this? If you have created your site in iWeb, you welcome page should be Welcome.html and nothing like php."
    I have no idea how I did this, but it looks like I screwed it up pretty good. Could it have anything to do with the fact that at some point in this process (not sure when) I changed the site's name. Originally, I was going to call it Robert's Fine Art Prints, but that got changed to Robert Wells Fine Prints. Though I have no idea if this has anything to do with my current problem.
    Things have gotten worse. Thinking I did something wrong & could fix the problem by re-uploading, I deleted the files from the server and tried again. Now, most of the image files are failing to upload in Cyberduck.
    Chuck Usher asked "When you publish to a folder I believe you get a folder and a separate index.html file. did you up load both and address the index file? What is the site address? "
    Yes, you get an index.html and a folder of supporting documents. I uploaded both at the same time. The address is supposed to be robertwellsfineprints.com but it doesn't work.
    Thoughts appreciated.
    Robert

  • Why would iWeb publish one but not all of the changes on my website?

    Hi,
    I am making some minor changes to my website (created on iWeb). I had no problems on one page making a change and publishing it. But when I tried to make a change and publish another page in the same website, the changes didn't and won't seem to 'take'....
    Any thoughts on what might be going on?
    Thanks!

    What version of iPhoto are you running?  Try using the File ➙ Publish Entire Site menu option. 
    OT

  • Can't select text in iWeb published pages

    I need to rebuild pages from existing ones on the web that were made with iWeb 09.
    Text boxes that also include inserted images appear to have lost the ability to have their text highlighted and copied off the web (existing) pages.
    Boxes that contain ONLY text seem to be selectable, just fine, but if ANY image has been inserted in the text stream when the page was designed, attempting to select just the text ends up selecting the entire box, which is not very helpful.
    Is there a way around this?

    Thanks so much for enlightening me on the VPR (very peculiar results) hidden inside iWeb 09.
    Whoda thunk that simply adding a simple drop shadow onto text would mess up the entire selectability of every bit of adjacent text in that text box?
    That qualifies for the IBotY (Institutionalized Bug of the Year) award. Surely the code writers should have seen this one coming and worked around it by automatically selecting and isolating the drop-shadowed text?
    Now a new conundrum.
    After fixing the text by dropping it into in-line text boxes, all is well except (wait for it)
    Just One More Thing.
    The boxes, now selectable, show up just fine in iWeb, all neatly packed together the way I want the layout to look.
    BUT
    They float apart. The page is tall, but in Safari, at least, some of the boxes are now floating down-page a few or several dozen pixels. See if it does it on your computer here: http://www.hdslrreview.com/HDSLRreview/Cameras.html
    What the?

Maybe you are looking for