Jabber 9.2 and StartCallWithVideo set to false not taking

The StartCallWithVideo option doesn't seem to working in Jabber 9.2 (tried 9.2.0 and 9.2.2). Tried false and FALSE for value.
The jabber-config file downloads fine and has all the settings below on PC and the DockedWindow is not visible so the settings are working, but the calls start with video still and on the Jabber GUI under call section the start calls with video is selected.
When I make call to someone else it starts with video unless I manually set to not start calls with video.
Not finding any bugs on this.
Anyone seen this before or know how to get it working if it isn't a bug?
<?xml version="1.0" encoding="utf-8"?>
<config version="1.0">
<Client>
</Client>
<Directory>
  <DirectoryServerType>UDS</DirectoryServerType>
</Directory>
<Options>
  <StartCallWithVideo>FALSE</StartCallWithVideo>
  <Start_Client_On_Start_OS>true</Start_Client_On_Start_OS>
  <DockedWindowVisible>FALSE</DockedWindowVisible>
  </Options>
<Policies>
<Screen_Capture_Enabled>true</Screen_Capture_Enabled>
  <File_Transfer_Enabled>true</File_Transfer_Enabled>
  <Disallowed_File_Transfer_Types>.exe;.msi;.rar;.zip;.mp3</Disallowed_File_Transfer_Types>
  <Video_Disabled>false</Video_Disabled>
</Policies>
</config>

Anyone have fix to this issue with IM&P 9.1.1, I have UC Service profile setup right and the setting set to false and my client is getting current XML file but still starts calls with video. I've tried both upper case and lower case for the false value. Other settings from my jabber-config file are working just fine. 
FALSE
I've been thru the links above and documentation again but not seeing a option anywhere on CUCM UC profile pages or IM&P to disable this.

Similar Messages

  • I'm using the note taking view of Word 2011 for Mac so I can record a meeting as well as take notes. The audio of the internal microphone is so low - can I attach an external mic and have it work with note taking view?

    Can I attach an external mic to my Macbook Air to enhance sound input for the note taking view of Word 2011 for Mac? I've tried preferences to up the volume of my sound, but I still cannot hear the recording. Any suggestions? I need to record a meeting as well as take notes so I'd like to use this tool, but the audio is not good enough.

    A USB microphone can work with the Air, and I've used them before with my 11" Air.  Griffin also made a product (the iMic) that will add a standard computer microphone port, connecting to your USB port.  It's heyday was the time of the old iBook laptops (which also lacked a microphone in jack) but I think it's still around.
    The single sound port on the 2011 models, as I recall, supports iPhone style headphone/microphone but I don't believe it will support a standard microphone input. 
    The built in microphone sits on the left side of the computer and I suspect wouldn't work well for picking up a lecture unless you were sitting just right in position vs. the speaker (preferably having the speaker positioned to the left and sitting really close).  By design most laptop microphones presume they are going to be mainly used to record a sound coming from the person sitting at the keyboard, while for a lecture you normally would prefer it concentrate on sound coming from behind the screen.

  • I have a brand new ipod touch and when setting it will not connect to my home wifi, even though it is working with all other devices

    I have a brand new, just out of the box, ipod touch that will not connec to my home wifi. The connection works with all other devices.

    What happens when you try to connect?
    Error messages?
    Does the iPod see the network?
    Have you tried other networks?
    See:
    iOS: Troubleshooting Wi-Fi networks and connections

  • HT1320 My 7th generation Ipod nano 16 gig just went dead yesterday. I thought maybe it ran out of juice and needed recharging. Its not taking a charge, or even lighting up to show connection to my computer to recieve a charge. What can I do? Its pretty ne

    My 16 gig, 7th generation ipod nano just died yesterday.
    I assumed it just needed recharging.
    It is not responding. I have complete black screen even when its hooked up to charge....and it wont turn on.
    Help!!!!
    I got it as a birthday gift around the end of May, its brand new.

    Clean out the Lighting connector on the bottom of the nano, clean Lightning connector cable, make sure your computer is not set to go to sleep and connect it to the computer and let it charge for 30 minutes. After this time, while it is still connected, hold down the home and sleep buttons, wait for the Apple logo, let go of the buttons.

  • [svn:osmf:] 14758: Fix FM-556: When MediaPlayer enters error state, capabilities should be set to false, and capability change events should be dispatched.

    Revision: 14758
    Revision: 14758
    Author:   [email protected]
    Date:     2010-03-15 12:27:47 -0700 (Mon, 15 Mar 2010)
    Log Message:
    Fix FM-556: When MediaPlayer enters error state, capabilities should be set to false, and capability change events should be dispatched.  Also fixed typo in one of the capability change event names.
    Ticket Links:
        http://bugs.adobe.com/jira/browse/FM-556
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/events/MediaPlayerCapabilityChangeEvent.as
        osmf/trunk/framework/OSMF/org/osmf/media/MediaPlayer.as
        osmf/trunk/framework/OSMF/org/osmf/net/NetStreamLoadTrait.as
        osmf/trunk/framework/OSMFTest/org/osmf/media/TestMediaPlayer.as

    Well, I can tell you that this kind of error is not OS related, but rather a HW thing.  It happens where there is a general detection of something going wrong.  Sometimes it can happen randomly and might not be an indication of a problem.  But sometimes it can be caused by things that are improperly functioning within the system like bad capacitors. 
    Unfortunately I don't really know what to do about such things except give you machine a proper inspection.  But if things are working fine, and continue to do so, I wouldn't worry about it.  If it becomes a regular occurance, then I'd worry.

  • After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?

    After updating to 4.0 stable today, FF reports it is in offline mode and can't open pages! I've checked the work offline boolean in about:config, it is set to false as it should be. !?!?

    What in particular didn't you like about Firefox 6?
    You can undo a lot of changes, either via changing settings or prefs on the <b>about:config</b> page or via extensions.
    *https://support.mozilla.com/kb/common-questions-after-updating-firefox
    Do a clean reinstall of the version that you want to use.
    Download a fresh Firefox copy and save the file to the desktop.
    *Firefox 3.6.x: http://www.mozilla.com/en-US/firefox/all-older.html
    *Firefox 6.0.x: http://www.mozilla.com/en-US/firefox/all.html
    * Uninstall your current Firefox version.
    * Do not remove personal data when you uninstall the current version or you lose your bookmarks and other data in the profile folder.
    Remove the Firefox program folder before installing that newly downloaded copy of the Firefox installer.
    * It is important to delete the Firefox program folder to remove all the files and make sure that there are no problems with files that were leftover after uninstalling.
    Your bookmarks and other profile data are stored elsewhere in the Firefox Profile Folder and won't be affected by a reinstall, but make sure that you do not select to remove personal data if you uninstall Firefox.
    * http://kb.mozillazine.org/Profile_folder_-_Firefox
    * http://kb.mozillazine.org/Profile_backup

  • Jabber 9.2 having trouble setting up Webex Meetings in client

    Hello All,
    I have a setup of Presence 9.1.1 using Jabber for PC 9.2.1 (I have also tried 9.2.2)
    we are using "webex personal conference meeting center pro 1000" in cloud off premises for our webex.  Webex is using Single Sign On
    All things in jabber work fine with presence, calls etc and the webex site works fine as well
    we can login, create and join meetings with no problem.
    Inside the Jabber Client is the option for Meetings.  I point it to our webex site ( i have tried manually as well as the UC Profile in call manager)
    however it always gives me the error of
    "Cannot Verify your Account.  Check your username and Password"
    We have verified passwords etc and we can login to the webex site just fine via a web browser.
    In the UC profile i have tried using HTTP as well as HTTPS but have had no luck.
    Has anyone else run into this?
    thanks

    Hi,
    Did you manage to resolve your issue in the end?
    I have a very similar issue. The customer uses Jabber for phone and IM on premise without issue, but can never seem to integrate with their webex account.
    The UC profile is set but get constant error:
    Cannot verfity account. Check your username and password.
    I know there are correct as I can login to webex when browsing normally.
    Thanks
    Oli

  • What are the side effects of setting "_object_statistics=false"?

    Hi,
    On a 10.2.0.3.0, due to frequent ORA-04031 errors, we have been recommended to set objectstatistics=false in init.ora and bounce the database.
    Metalink Bug ID: 3519807
    Going through the available documentation on net, I found that this parameter would have same effect as setting STATISTICS_LEVEL=BASIC or even worse.
    Documentation (for statistics_level) says following options are affected.
    * Automatic Workload Repository (AWR) Snapshots
    * Automatic Database Diagnostic Monitor (ADDM)
    * All server-generated alerts
    * Automatic SGA Memory Management
    * Automatic optimizer statistics collection
    * Object level statistics
    * End to End Application Tracing (V$CLIENT_STATS)
    * Database time distribution statistics (V$SESS_TIME_MODEL and V$SYS_TIME_MODEL)
    * Service level statistics
    * Buffer cache advisory
    * MTTR advisory
    * Shared pool sizing advisory
    * Segment level statistics
    * PGA Target advisory
    * Timed statistics
    * Monitoring of statistics
    We have daily schema statistics gathering schedule in place so I feel query performance should not be affected (of course, this is my assumption).
    I just wanted to know what else would be affected due to this.
    Thanks in advance.
    Regards,

    Please let me know your ideas/inputs.

  • [svn:osmf:] 14823: Fix bug where canPause was not set to false for live streams.

    Revision: 14823
    Revision: 14823
    Author:   [email protected]
    Date:     2010-03-17 10:51:40 -0700 (Wed, 17 Mar 2010)
    Log Message:
    Fix bug where canPause was not set to false for live streams.
    Modified Paths:
        osmf/trunk/framework/OSMF/org/osmf/net/NetStreamPlayTrait.as
        osmf/trunk/framework/OSMFTest/org/osmf/elements/TestVideoElement.as

    Thanks for looking at this post. We have resolved the issue for ourselves by working with our DBAs to narrow down where the problem actually started. We found that the particular SQL we were looking at was not the issue. In a chart on a subsequent page (via a click through), we were actually running into where apex was starting to consuming memory but we were catching it later.
    What we found was that when we had a chart query that was SQL containing a pipeline function, the memory usage went up. And within 10 minutes, the server would crawl to a halt. To release the memory, the DBAs would have to bounce the Apex instance. When I changed the query to be a function returning SQL, the problem stopped. I don't know what the correlation was between SQL and moving to a PL/SQL function returning SQL.
    I am not even 100% positive of the pipeline function being the cause. I only know that this started happening about the same time as when I implemented the pipeline function. I understand you are leery of a one-second function/query running up that kind of utilization. No one here believed me either (including me really). We figured it HAD to be a coincidence. But once I changed the query from SQL to a function returning PL/SQL, our problem went away.
    Thanks to all who looked at and thought about this.
    Walter

  • How to set render false for OALink Bean

    Hi friends,
    is it possible to set render false for OALinkBean.
    i am using the following code but it is not working
    OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree");
    if(projectType.equals("XYZ"))
    LinkBean.setRendered(false);
    }

    previously i was using this code for hiding the subtablink but this code was not working
    OALinkBean LinkBean = (OALinkBean)webBean.findChildRecursive("subTabLinkThree");
    LinkBean.setRendered(false);
    but now i am using following code and this code is working fine
    OASubTabLayoutBean subTab = (OASubTabLayoutBean)webBean.findChildRecursive("subTabLayoutRN");
    if(subTab != null)
    subTab.hideSubTab(2,true);
    }

  • How set autocommit=false with container transactions?

    Hi all!
    A'm using EJB's with transaction attribute=Container.
    This is simple scenario:
    call Session Bean
    begin transaction
    call EntityBean1 {
    database update 1
    call EntityBean2 {
    database update 2
    end transaction
    return from session bean
    The problem is:
    when update2 fails update1 not rolling back.
    A know, that solution of this problem is set AUTOCOMMIT=FALSE in Connection, but how do this with container transactions? Point me exactly to place, where this can be done, if this possible. Or may be no general solution (I.e. Each case demands it's own approach.)?
    (I can't directly call method of Connection object because of transaction managed by container)
    Tnx a lot.

    Hi there,
    I have the same problem with Orion and NuSphere MySql.
    When I define a container-managed transaction, the autocommit mode is not changed.
    I have a session bean for which I set the transaction attribute to REQUIRED and two entity beans for which the transaction attribute is SUPPORTS in the ejbjar.xml file.
    The session beans calls the two entity beans and makes some modifications on them like for instance removing them from the database.
    When I check whether a transaction can be rolled back, for instance by putting in my code a loop that never ends and then stopping the server, it seems my application is running in autocommit mode. No rollback is done.
    This is very strange.
    The two entity beans are stored using gemini tables which permit rollbacks. So when I start a transaction inside mySql using sql statements, I can do a rollback without problem.
    Any idea of what's going wrong ?
    Dimitri.

  • How can I set _gby_hash_aggregation_enabled=FALSE in 11gR2

    Hello,
    I am tiring to set set gbyhash_aggregation_enabled=FALSE in my new 11gR2 instance using:
    alter system set gbyhash_aggregation_enabled=false scope=spfile;
    And I get this:
    alter system set gbyhash_aggregation_enabled=false scope=spfile
    ERROR at line 1:
    ORA-00911: invalid character

    Sky13 wrote:
    Nice, maybe I just need a little more coffee.Enjoy your Coffe :)

  • While Compile the Package it shows "alter session set plsql_trace=false"

    Hi,
    My package was working fine and suddenly the status is invalid
    so i tried compiling the package that time sql developer got hanged, package also not getting compiled.
    i asked DBA to find out the status, they said the following query is running from your machine.
    "Alter session set plsql_trace=false". once they kill the session, sql developer got released.
    What could be the reason for this?? please help me to resolve this.......
    Thanks,
    G

    Most "set events" are workarounds or needed for Oracle support to do some debugging. Using them is at your own risk, and probably not supported by Oracle if you get into trouble.

  • Conference Room issue, double bookings allowed even though AllowConflicts is set to False

    Hi. I used ADsi Edit to completely delete/remove my public folders database. I now run Get-PublicFolderDatabase and it doesn't find one, so I think I have completely removed it. My issue is that all my conference  rooms are now allowing double bookings
    even though AllowConflicts is set to False. I'm pretty sure I have jacked this up due to deleting the public folder database. What should I do to correct this? Thanks. John

    Hi John
    Check if this helps
    http://social.technet.microsoft.com/Forums/exchange/en-US/c812fb70-46f7-4654-b241-6a1fb13e1907/meeting-rooms-get-double-booked-regardless-of-settings?forum=exchangesvrgenerallegacy

  • Set visible=false in Label not removing its space in screen

    Hi All,
    I have three labels ony by one having width=100% for all.
    For some reason, now I want to make 2nd label invisible in
    the screen.
    So I set visible="false" for the 2nd label. Now I cannot the
    see the text displayed by the 2nd Label, but I can see the space
    occupied by the Label.
    I mean that, now i am getting the first label text, and have
    blank row which has the text earlier, but not now and thrid row
    with 3rd label text.
    Also I checked that, if I set the height of the 2nd Label to
    0 then also its not completely removing the 2nd row, only
    possibility I found was completely comment the code for the 2nd
    Label is the only way to hide the 2nd row :)
    Any help would be appreciated.

    Hi Sujit,
    Thanks for giving an useful tip which is new to me. But still
    I can see a little space between the first and 3rd label.
    Now this little space comes from the default space between
    the controls. After few trials I found that there is a property
    called "verticalGap" for the containter which holds these 3 labels.
    I set the value to 0(zero) for verticalGap. Now the issue resolved
    Thanks for a useful post

Maybe you are looking for