Jabber - cannot login in Phone Accounts

Hello All,
I am currently configuring CUPS 8.6.4 to integrate with CUCM 8.6.1 and provide IM and Calls to Jabber Client (version 9.0.5). Note that I do not sync to any active directory,ldap,etc, instead the users are retrieved from CUCM. I am already able to sign into Jabber Client and have chats with other people, however I am unable to make calls. I went into the options and found that I cannot log into the Phone Account (See Attachment).
In CUCM, I have given each user the capability for CUP and CUPC (System > Licensing > Capability Assignment) and all users belongs in Standard CCM End User, Standard CTI Enabled and Standard CTI Allow Control of Phones supporting Rollover Mode. All the users have Cisco 6921 Phone and they are associated with their respective devices. I have configured SIP Trunk and activated the required services.
Please help me in this issue
Thank You

Look here:
http://www.cisco.com/en/US/docs/voice_ip_comm/cups/8_0/english/install_upgrade/deployment/guide/dgclient.html#wp1091492
These are the steps:
•Creating a Softphone Device for Each Cisco Unified Personal Communicator User
•Associating Users with Softphone Devices
•Adding Users to User Groups
•Associating a New Device with a User
•Resetting a Device
Rate this if helps!
Regards
Leonardo Santana

Similar Messages

My account Cannot login and say account restricted...

My account Cannot login and say account restricted ! i Never make payment
and my history payment ( You haven't purchased anything yet. ) !!!
what it's doing ?
My Skype ID : [Removed for privacy]

Well if you were born and raised here in the US or Moved to US and got citizenship you should have a Social Security Card many businesses Like Verizon, or Credit Cards companies require having a S.S.C and require giving at least the Last 4 of the Card to Verify who you are + they'll probably ask a few other security credentials..
I'd say for now getting what you had is not going to be easy at least until you get and established S.S.C. and or if you can prove any other Information Verizon may ask you for..
Hope that Helps Good Luck b33

Cannot login to network account (leopard client and server)

Up until now, I have used local accounts on my leopard server. I want to start experimenting with OD prior to implementing. I created a new user account in the /LDAPv3/127.0.0.1 domain, and have bound my leopard client to the server using directory utility. On the login screen, "Network Accounts Available" has a green button to the left of it. When I try and login to the server account, the login window just shakes. At first, I could enter the password and then it would prompt me for a new password. Trying to enter a new password would not allow me to login. I went back to server admin and disabled the "require new password" setting, (as well as the other good security policies)...
I have also reset the password in WGM, and made sure to disable all the security stuff there too...
Lastly, I have deleted the server in directory utility, rebooted, then added it back in, and rebooted again...
I still cannot login to the server account, the login screen just shakes
Does anyone have an idea of what settings and or logs I can check to try and narrow down what is going on?
Thanks in advance....

to close out the thread, I have working dns on my network, but I did not have dns enabled on my server. I enabled the dns service and entered just the info for my server, then assigned my server and client to use the server's ip addy as the primary dns server. Next, I created the home directory.
Once both steps were done, I was able to log in from my client to my server based account...
FYI-I found a document on afp548.com called "leopard server: advanced setup, rsync backup and automated reporting" that walks you right thru the process...Here is the link, it's a very useful doc....
http://www.afp548.com/filemgmt_data/files/Leopard%20Server%20Quickstart%20Guide. pdf
thanks again boomboom_uk and woVi, your suggestions were spot on....

Cannot login to any accounts anymore...

I have my latest MacBook Pro for over 2 years on one user account. Every time I boot up I just enter my password and get started. Today, however, I received a login with my computer name and nothing in the user or password fields. I have tried every combination I can think of and nothing works.
I have a system disk from the purchase, but it's damaged. I used another system disk (10.4) from my prior macbook, and booted. Tried to change account password but doesn't see my HD, only the startup disk (my current os is 10.5). I does see the HD and allow disk utility, etc.
Very frustrated I cannot login at all even though I know my admin/master password (not sure what the login or short name was though).
I am contemplating re-installing the OS back to 10.4 but obviously fear losing my apps/data, etc.
Please offer suggestions!

HI,
Go to /Library/Preferences and move the com.apple.loginwindow.plist file to the Trash. Restart your MacBook. If the login window is still a problem....
I have a system disk from the purchase, but it's damaged. I used another system disk (10.4) from my prior macbook, and booted.
The disc(s) that come with your Mac(s) are machine specific meaning one won't work on another.
You can run Disk Utility by booting in Safe Mode You can Verify the startup disk in Safe Mode, but not repair it. You need the install disc that came with the Mac you are having problems with to do this.
What is Safe Mode
Carolyn

Cannot login into network accounts when there is no network connectivity

Hey guys
quick question here if anyone can help.
What has been done: backuped user's home folder, binded the mac to AD, logged in as the user's AD name, copied everything from the backup into the new user's home folder, users can work flawlessly.
What is wrong is when they leave the office, after a few hours they cannot login anymore to their AD username. Is there something i missed?
The network accounts do not appear in system preferences.
Thanks

On your client machine login screen, type in ">console" (without quotes) in the username field and hit enter. Try and login with your network account username and password. What error messages do you get in console?
Taylor

Cannot login with a account created with workgroup manager on local box

Hi my name is richard and i recentgly acqquired from one of ,y friends a macbook pro with leopard 10.5.7 and I downloaded the server tools to it because workgroup manager gives me more control over user creation and the like.there are three issues that i am facing right now:
1) I create an account for a user "VERONICA MARS" short name vmars with a password of apple. when I try to login using that account the login window just sits there and shakes its head at me like no no no wrong cridentials.
2) using the same account vmars i try to reset her password using wgm and it says that it cannot reset the password.
3) when i try to create the account it tells me that the home directory cannot be created.
oh and heres a bonus one:
most of the time in wgm it takes forever to get from one tab to the next and ill have to do a force quit to restore my mkac back to normal.
if anyone can help with these issues please respond
thanks in advanced
richard johnson
mac fan for life

Please let us know the username of the account that is giving you trouble.

Cannot Login with Guest Account

I cannot login to OS X using the guest account I have enabled. When I try to login with the guest account, the window shakes no. How do I fix this?

see this thread, will probably solve your issue
http://discussions.info.apple.com/thread.jspa?threadID=1521487

Cannot login with Network account.

Hi,
I am an experimented Mac user, but quite new with Snow Leopard Server.
I've just purchased the brand new MacMini Server.
I have configured my server with the name server.local and installed OpenDirectory as Master.
I wanted to try the network login, so I created a Test1 account in Open Directory. Then from my iMac I joined my server.local through System Preferences/Accounts/Options/... then I log off and try to use the newly created account test1.... I asked the system to change the password from first loggin... which works, but then I receive a message saying that I cannot log in for the moment... I tried everything but I just can't use the network account.
Any hints?
Cheers.

You should avoid .local at all costs when configuring an OS X Server.
.local is reserved for zeroconfig/Bonjour, and will cause conflicts.
There's an excellent tutorial for new users here
http://www.wazmac.com/serversnetwork/fileservers/osxserver_setup/osxserver106setup.htm
Jeff

Cannot login to secondary accounts; can't fast user switch

I am on a Macbook, 2 GB RAM, 120 GB hard drive, 10.4.8. Today, I developed a strange problem with logging in. I have auto login set so I log in automatically to my main account, which (thank God) works. However, if I access Fast User Switching to switch to a secondary account I have set up, called Test, the transition starts (the cube rotates) , switching to a solid blue screen...and never goes any further. I cannot seem to find any way to bring up the login screen on startup, either; I must allow my main account to boot up, and then try to switch accounts. If I turn off auto-login, I get the login screen, but login to the other account still fails.
If I select, instead, the Login Window from the Fast User Switching menu, I get that screen. But when I select an account other than my main account, and try to log in, I get that blank blue screen. I've waited many minutes to see if something will eventually happen, but no go. The only way to get control of my Macbook back is to hold down the power button until it shuts down.
I have run Tech Tool diagnostics and have repaired permissions (no errors found). I deleted my Test account, and redefined it; I also defined a second test account, one with admin privs and one without. No problem creating the accounts. However, when I try to log in to those accounts, the computer hangs on the blue screen.
I'm not sure when this problem began because I have not been using my Test account for a couple of weeks. A lot has changed since then.
Any suggestions, anyone?

More info: I turned off auto-login, and was able to log in to my test account. Then, I was able to use fast user switching to switch to my main account. I will try again restarting into my main account and see if I can switch to Test. This failed consistently before I posted here. Perhaps the "sense Mac guru" circuit kicked in and cured the problem. I'm about ready to turn in so won't post a follow-up until tomorrow. Right now, I need to use my two accounts to get the job done (a writing job with screen shots of a new unaltered account). Then, I'll go back to trying to see if the problem still exists when I log in to the main account first.

I have set up a file share but cannot login with my account

Hi everyone. I set up a file share using the settings in OS 10.5, however when I go to login on Windows Vista using my specially created read only account (called: remote). I cannot get it.
I can only get in using these settings:
user name = xxx.xxx.x.xxx\myaccount
password = blah blah blah.
Yet when I apply the same settings changing 'myaccount' to 'remote', I cannot get in.
I'm not sure where I am going wrong, any help would be much appreciated. Thanks!

No need to apologise, I'm the idiot who can't setup a home network. Although I'm sure Vista is at least to blame somehow.
I have sharing turned on and it says "Windows users can access your computer at smb://192.168.x.xxx."
If I click "options" it has a box which has an "on" tick box and my name. I have ticked it. When I ticked it, it asked for my admin password which I supplied.
On the firewall front I have allow all incoming connections.
I am trying to login to 'remote' whilst my Mac is still logged in as me, 'nathan' I have successfully logged in to the mac on the same settings using account: 'nathan' on Vista whilst still in 'nathan' on the mac.
I am trying to connect going into network on vista and selecting my mac, correct.
The connect works with 'nathan' if I go:
192.168.x.xxx\nathan
password
but for some reason the 'remote' user I have set up wont work on vista using the same format.
Thanks.

One iMac cannot login to network accounts

We have a small network with Lion (10.7.5) Server running on a Mac Pro and a variety of 8 iMacs and Mac minis that use the server for file sharing and network accounts. The client Macs are running a mix of Mountain Lion (10.8) and Mavericks (10.9). They have all 'joined' the 'Network Account Server' using the 'Login Options' section of the Users & Groups preference pane. And, except for one iMac, all the clients can log into network (or mobile) accounts from the server -- both ones that have previously been logged into on that machine and ones that haven't. However, one of the iMacs will not log into a network account. There are a few local accounts and logging into them is no problem. But every time we try to log into a network account on this iMac, the login dialogue just does the 'invalid login' shake. It seems not to check the login credentials with the server.
As far as I can tell, this iMac is set up the same as all the others. It is certainly joined the Network Account Server and there is a green dot by the server name in the Users & Groups preference pane. I have removed and re-added the server from there a few times, and I've even reinstalled Mavericks on this iMac (it is running 10.9.2). I haven't been able to find anything that has helped to solve this problem. Does anyone know why one iMac would refuse to use the network logins from the server when the others work? Or what I can do to gain further information?
Many thanks.

On your client machine login screen, type in ">console" (without quotes) in the username field and hit enter. Try and login with your network account username and password. What error messages do you get in console?
Taylor

Users Cannot login to Network Accounts

Hello,
I have a newly built server, Mountain Lion, but am having issues with my users logging in; an error is received. I have not made the server Live Because of this issue of course. The Users Home folders are on a different external Hard Drive attached directly to the Server. I am able to see the the hard drive and its a shared drive. I received no errors (sudo changeip -checkhostname) showed success. No mThe computers are joined in the Network Server Account, and
But here is the kicker, If i create a user using the Local Home Folder, and not changing it to the external hard drive I am able to login.
Has anyone had this issue? If so, what was your resolution, how were you able to fix this issue with the login issue?
Any Assistance with this, would be great!
Thanks
B

an error is received.
umm... including the error message might have been useful...
In either case, you don't state whether you've explicitly shared the external drive as a home directory repository.
If your users home directories on on this external drive, then you need to share that external drive (typically via AFP) so that the client systems/workstations can connect to the share as part of the login process.
Have you verified that the drive is shared, and that the AFP service is running? Can you manually mount the sharepoint from a remote system on the LAN?

Cannot login to network accounts from client computer

Hi. I'm setting up my first OS X Server setup for home use...I'm not creating a very complicated setup, but I've been working through the setup one step at a time.
Right now, I'm just running the DNS, File Sharing, and Open Directory services. I setup a couple of Network User accounts, and I wanted to try using one of the accounts to log in to a Mac client (running Mountain Lion) on the network. When the machine first comes up, I get a message that says 'Network Accounts Unavailable,' and if I try to log in, I get the error message saying 'You are unable to log in to the user account "xxxxx" at this time. Logging in to the account failed because an error occurred.'
If I stop and restart the Open Directory service, I get the following messages in the Open Directory Log:
2013-02-15 09:11:01.017801 EST - Unregistered node with name '/LDAPv3/127.0.0.1'
2013-02-15 09:16:19.139744 EST - Registered subnode with name '/LDAPv3/127.0.0.1'
Not sure if this is the source of the problem, but these are the only messages that are coming up if I turn the Open Directory off and then on again.
If anyone has any experience with this, or any suggestions, I'd greatly appreciate it!
Thanks!
If it helps:
Running OS X Mountain Lion (10.8.2) with Server (v2.2.1)
Client Machine is a VMWare Fusion VM Running Mountain Lion (10.8.2)

On your client machine login screen, type in ">console" (without quotes) in the username field and hit enter. Try and login with your network account username and password. What error messages do you get in console?
Taylor

Jabber Cannot Control Desk Phone

I know, I know. A well-worn topic. But it's just not happening for me, and I'm new to Presence 9.1 This is a new installation. Also using CUCM 9.1 and Jabber 9.2.6. I don't even know where the Jabber error logs are.
Anyway, when I try to get Jabber to control the desk phone, it doesn't work and when I look at the connection status, I get an error stating that there is a connection error to the CTI server. That server is my CUCM Subscriber. I am LDAP integrated, but we are pointing the a global catalog. The CCMCIP service is running, the profile is created and the user is associated with it. On the CUCM user, the phone is associated to the user, the line is set up as the primary extension, and the user is in the Standard CTI and Standard CCMUSER groups. The user is configured to use IM and Presence, and the profile is selected. On the phone, the user is set as the owner and the line appearance is set to the user.
The two things I've seen that might be issues are that we are using the following LDAP filter:
(&(objectclass=user)(!(objectclass=Computer))(!(UserAccountControl:1.2.840.113556.1.4.803:=2))(|(ipphone=*)(samAccountName=adm-*)))
I didn't create this and I don't know enough about filters yet to know if this is good.
Secondly, in my past experience, the configurations for the CTI service (i.e. "cti_1.1.1.1_cti_tcp_host_synced_000" - not the real IP) have always been created automatically, but they had to be created manally for this install. I don't know if that's a function of 9.1 or if there's an integration issue.

Hey Refran,
I had the same issue when doing a LAB installation.
My problem was, that I sometimes used DNS names and sometimes IP Addresses.
After I changed everything to IP Adresses, Jabber was able to connect to the CTI Server.
How did you configure your Servers of CUCM (System--> Server) and the Integration of CUPS and CUCM?
Here a log of Jabber:
REGISTER sip:172.20.10.56 SIP/2.0
Via: SIP/2.0/UDP 172.20.10.56:5060;branch=z9hG4bK000001b4
From: <sip:+41417xxxxx@>;tag=001d72c593ae000200004084-00002998
To: <sip:+41417xxxxx@> -------------------------------------------------------------------------------- here you should see theIP, but in my case this was missing
Call-ID: [email protected]
Max-Forwards: 70
Date: Thu, 27 Jun 2013 21:33:58 GMT
CSeq: 101 REGISTER
User-Agent: Cisco-CSF/9.3.1
My recommendation for your is to test again, after changing everything to IP Adresses.
Otherwise, you can also change the hostfile of the client
Best regards
Ben

Cannot login with mobile account when server is switched off

Hello all,
First of all, my condolences to the Jobs family.
OK. On with my problem. I apologise in advance if this has been answered before. I've trawlled through various boards and I can't seem to find an answer.
I'll try to keep it brief.
I've set up a mac mini with lion server. Done all necessary updates.
I have a lion macbook which is the client.
On server, created an Open Directory etc..
I created 2 mobile network accounts on the server. Set preferences etc.. Added both to workgroup.
Added the client to the domain in system prefs login options.
Logged into the 2 accounts on the client. All working well. Can see my mounts. Mobile accounts created successfully and syncing working.
So, the problem I have is, when I shutdown the server, my mobile accounts on the client disappear. Also, the login screen states, 'Network accounts are unavailable.'
I've been looking at this for a week now and it's driving me mad. I must have missed something - can anyone shed any light on this please?
With thanks, Paul.

oh well - gave up and reinstalled lion server.
GROAN!

Jabber - cannot login in Phone Accounts

Similar Messages

Maybe you are looking for