Java application behaving differently when run from netbeans

Hi,
When i run my program from netbeans it receives packets from ip addresses which are not in my subnet
but when i run it from outside netbeans it doesn't receives packets from ip addresses which are not in my subnet.
Can anybody explains why my application is showing different behavior when run from netbeans and when run independently?
Thanks.

Bingo! My script started the rmiregistry and continued on to start the servers. Apparently, it was too quick. I put a 10 second delay after the rmiregistry startup and all is working as it should.
Thanks for your help. You get the Duke dollars if I can figure out how that works.

Similar Messages

Applescript in Automator behaves differently when executed from inside Automator, or as an Automator application

Hello everyone,
I'm trying to execute an Automator workflow at startup, which I do by saving the workflow as an application, and adding it to the startup list, this works fine.
My workflow works fine when executed from within Automator (ie clicking on the "Execute" button), but does not anymore when the Automator application is executed (ie. simply double clicking on my Automator file)
I have narrowed it down to an Applescript inside my workflow which fails only when the application is executed from the finder (the step works fine from within Automator). The script automatically creates an ad hoc wifi network.
The line which specifically fails is :
set menu_extras to value of attribute "AXDescription" of menu bar items
Anyone has any idea why executing the workflow from within automator, and executing it from the finder yield different results ?
The crazy thing is that all this worked fine up until a few days ago, there might have been an update since (running Mavericks 10.9.2), but nothing game-changing.

You will need to provide more than the one line of AppleScript you quote if you want a definitive answer. (We can't even see which app you are addressing this to.)

Code behaves differently when run in debugger

var he:Array = handControl.getHumanInfo(ha, handNumber);
while (he.length != 0)
humanInfo.push(he.shift());
This snippet is part of a large flash project I am working
on. The program works fine by itself, but when I try to step
through it in the debugger, it sometimes crashes, depending on
where I put a breakpoint. If I put the breakpoint on the first line
of code above, I can step into the function getHumanInfo(), trace
it, and step back out, and everything is fine. But if I only put a
breakpoint somewhere inside the getHumanInfo() function, all of a
sudden when I step out of that function, the variable 'he' is
undefined, and so the while loop never ends.
This makes no sense to me. The code is either good or bad, it
shouldn't behave differently based on where I put the breakpoint.
The getHumanInfo() function always creates a new array and
passes it back, so there is no reason 'he' should be undefined.
This has happened many times when I've tried to use the flash
CS3 debugger -- is there a known issue that this sounds like? I'm
so fed up I'm ready to stop using the debugger altogether.

I ran the program without the debugger and put some trace()
statements in, just to make sure. Everything works fine without the
debugger. So it seems to me it has to be a debugger issue. Has
anyone heard of a similar issue?

Executable behaving different when called f/Java

I have an executable that is run from the command line which behaves differently when I run it from my application. The executable takes MP3s files as arguments and merges them together. When I use large files from within my app, it doesn't respond, but using the same files from the command line works fine. I was thinking it might be a memory thing, but the executable should get its own space seperate from the VM. Does anyone have any suggestions? Thanks!

I do not have the source for the executable, so I wouldn't be able to pull lines out of there. It works from my Java app when I pass in smaller files, so I know I have the syntax correct, but with larger files it hangs. When I run the same thing from the command line with the larger files it runs like a champ. I was trying to use my task manager (I'm on Win NT) to look at memory usage since the only variable seems to be file size, but nothing seems to indicate it is a memory issue.

Opening Excel Workbook Fails when run from Scheduled Task on Windows Server 2008 Rw

Hi,
I have a little vbs script that instantiates the Excel.Application object and then opens a work book to perform some tasks on it. The script runs fine when run from the command line. When I attempt to run it as a scheduled task (it is supposed to update
data that is pulled from a SQL Server at regular intervals), it fails with the following error:
Microsoft Office Excel cannot access the file 'c:\test\SampleWorkbook.xlsm'. There are several possible reasons: .....
The file does exist. The path reported in the error is correct. The account under which the task is running is the same account I use to run it from the command line. User Account Control is not enabled, and the task is set up to run with highest privileges.
When I run the same script through the Task Scheduler from a Windows Server 2003 machine, it works without issue.
I was just wondering if somebody on this forum has run into a similar issue in connection with Windows Server 2008 R2 and figured out what the magic trick is to make it work. I'm sure it is rights related, but I haven't quite figured out what which rights
are missing.
Thanks in advance for any advice you may have.

This is truly killing me ... trying to get it working on Windows Server 2012 without success.
I desperately need to automate running Excel macros in a "headless" environment, that is non-interactive, non-GUI, etc.
I can get it to work using Excel.Application COM, either via VBScript or Powershell, successfully on many other Windows systems in our environment - Windows Server 2008 R2, Windows 7 (32-bit), etc., -BUT-
The two servers we built out for running our automation process are Windows Server 2012 (SE) - and it just refuses to run on the 2012 servers - it gives the messages below from VBScript and PowerShell, respectively-
I have tried uninstalling and re-installing several different versions of Microsoft Excel (2007 Standard, 2010 Standard, 2010 Professional Plus, 32-bit vs. 64-bit, etc.), but it makes no difference.
Would be extremely grateful if any one out there has had any success in running Excel automation on Server 2012 in a non-interactive environment that they could share.
( I have tried adding the "%windir%\syswow64\config\systemprofile\desktop"
folder, which did fix the issue for me when testing on Windows Server 2008 R2, but sadly did not resolve it on Windows Server 2012 )
[VBScript error msg]
Z:\TestExcelMacro.vbs(35, 1) Microsoft Office Excel: Microsoft Office Excel cannot
access the file 'Z:\TestExcelMacro.xlsm'. There are several possible reasons:
• The file name or path does not exist.
• The file is being used by another program.
• The workbook you are trying to save has the same name as a currently open work
[Powershell error msg]
Exception calling "Add" with "0" argument(s): "Microsoft Office Excel cannot open or save any more documents because th
ere is not enough available memory or disk space.
To make more memory available, close workbooks or programs you no longer need.
To free disk space, delete files you no longer need from the disk you are saving to."
+ CategoryInfo : NotSpecified: (:) [], MethodInvocationException
+ FullyQualifiedErrorId : ComMethodTargetInvocation
You cannot call a method on a null-valued expression.
+ CategoryInfo : InvalidOperation: (:) [], RuntimeException
+ FullyQualifiedErrorId : InvokeMethodOnNull

Jdbc connection blocks when run from jar

The following code establishes a connection EXCEPT when run from within a jar file:
String jdbcDriverName = "oracle.jdbc.driver.OracleDriver";
String dbConnectionURL = "jdbc:oracle:thin:@192.168.2.7:1521:PRISM";
String userName = "mdo";
String password = "mdpass";
// Load the JDBC driver and create a connection to the database
Class.forName( jdbcDriverName );
OracleDataSource dataSource = new OracleDataSource();
dataSource.setURL( dbConnectionURL );
dataSource.setUser( userName );
dataSource.setPassword( password );
connection = dataSource.getConnection();
When run from a jar file, the application does not execute beyond the line:
connection = dataSource.getConnection();
No exceptions are thrown, it just appears that getConnection never returns.
Do I need to do anything different to execute this code from within a jar file?
Thanks in advance,
Phil
<><

When building the JAR file, I inadvertently included files from two Oracle JDBC driver versions (1.2 and 1.4). I was building a single jar file with all files in it.
I am guessing same named files existed in both driver JARs and caused "confussion" when combined into the single JAR.
Still, I would have expected an exception to be thrown or a null connection to be returned instead if the thread just blocking.
Thanks for all replies,
Phil
<><

Class not being created when running from jar

Hi all,
Tech info first:
IDE: Sun Java Studio Enterprise 8
Plaform: windows xp
I have created a Swing app, that connects to a com port(using the RXTXcomm). now, when I run the app in the IDE, everything is fine and dandy, but, when I run the jar file, the application loads, but the class in the app which deals with the com port is not created. here is the code:
    private static void createAndShowGUI() {
        //Make sure we have nice window decorations.
        JFrame.setDefaultLookAndFeelDecorated(true);
        Main receiver = new Main();
        receiver.getPropertiesFromFile();
        //Create and set up the window.
        frame = new JFrame("R�FILOG RFID Empf�nger");
        frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
        frame.setContentPane(receiver.mainPanel);
        frame.setJMenuBar(receiver.createMenuBar());
        frame.addWindowListener(receiver);
        frame.setLocationByPlatform(true);
        //Display the window.
        frame.pack();
        frame.setVisible(true);
        portListener = new RFIDReaderComm(receiver, "COM3");
        portListener.getConfiguration();
    public static void main(String[] args) {
        //Schedule a job for the event-dispatching thread:
        //creating and showing this application's GUI.
        javax.swing.SwingUtilities.invokeLater(new Runnable() {
            public void run() {
                createAndShowGUI();
portListener in the createAndShowGUI() function is an interface level parameter and is the class that is not being created. There is no error message.
If I move the two lines that deal with the port listener before the frame.pack() line, then the GUI is not even loaded, and when I view the processes in the task manager, the process starts and then quits without anything becoming visible. So from this I guess there is a problem with creating the class when running from a jar, but without any error messages, I have not a clue where to start...can anyone help?
thanks in advance.

Well, some more info, so maybe someone can come up with some tips for me...this is really important, and any help is greatly appreciated.
This is obviously a classpath problem. After running the my jar file with java -jar I finally got the error NoClassDefFoundError
Kind of obvious I suppose. But, I cannot seem to get the two jar files I need into the classpath. I have tried the following:
Updating my computers CLASSPATH with the relevant paths - not working
Trying to get the Sun Java Studio Enterprise to build the required jar files into the final package - cannot get this to work
Tried updating the manifest.mf in the following way:
Created a text file Manifest.txt with the lines:
Class-Path: RXTXcomm.jar
Class-Path: BrowserLauncher2-10rc4.jar
ran the command (in the same directory as Manifest.txt):
jar cfm RUFILOGScanner.jar Manifest.txt classes/*.class
but this does not work either. When I run: jar tf RUFILOGScanner.jar all I get is:
META-INF/
META-INF/MANIFEST.MF
classes/
classes/CRCCalculator.class
classes/Main$1.class
classes/Main.class
classes/RFIDReaderComm.class
classes/URLDialog$1.class
classes/URLDialog$2.class
classes/URLDialog.class
the classes I want added are not there. Plus, (I think this is because I am running SE8) the manifest.mf is not in a folder called META-INF. In fact, I have no folder called META-INF. Is this significant?
Please, can anyone help me?

Why does "Link Media" behave differently when used as a keyboard shortcut vs when right clicked???

Not sure whether anyone else is encountering this, but the "Link Media" command behaves differently when right clicked as opposed to when used as a keyboard shortcut.
When you right click to select that option for an offline file, you get only the corresponding disconnected source media. But when you execute "Link Media" via a keyboard shortcut, PP brings up a huge list of all other offline media. Why does it only do that when you use the keyboard shortcut for "Link Media" but not when you right click "Link Media".
I'd like to get the Link Media command to behave via the keyboard shortcut the same way it behaves when right clicked. I don't want to have to deal with relinking a hundred other files, but just the single offline file I'm working on.

Among the alternatives not mentioned... Using a TiVo DVR, rather than the X1; a Roamio Plus or Pro would solve both the concern over the quality of the DVR, as well as providing the MoCA bridge capability the poster so desperately wanted the X1 DVR to provide. (Although the TiVo's support only MoCA 1.1.) Just get a third-party MoCA adapter for the distant location. Why the hang-up on having a device provided by Comcast? This seems especially ironic given the opinions expressed regarding payments over time to Comcast. If a MoCA 2.0 bridge was the requirement, they don't exist outside providers. So couldn't the poster have simply requested a replacement XB3 from the local office and configured it down to only providing MoCA bridging -- and perhaps as a wireless access point? Comcast would bill him the monthly rate for the extra device, but such is the state of MoCA 2.0. Much of the OP sounds like frustration over devices providing capabilities the poster *thinks* they should have.

HT5568 Will the new update uninstall any Java applications I am currently running?

Will the new update uninstall any Java applications I am currently running?

Safari? Removing your existing Java applications? No. That won't happen.
What will happen is the Java run-time and the Java plug-ins that were part of Safari. You will be using the Oracle web site, and you'll be downloading and configuring and operating and managing the Java environment and the Java plug-ins for Safari and other browsers more directly, and usually with downloads from Oracle.
Apple deprecated Java a while back, and they're now finishing the work and the transition of support over to the folks at Oracle, and of securing OS X from attacks against stale versions of Java.

ZBook 17 g2 - poor DPC Latency performance when running from z Turbo Drive PCIe SSD

I'm setting up a new zBook 17 g2 and am getting very poor DPC latency performance (> 6000 us) when running from the PCIe SSD. I've re-installed the OS (Win 7 64 bit) on both the PCIe SSD and a SATA HDD and the DPC latency performance is fine when running from the HDD (50 - 100 us) but horrible when running from the PCIe SSD (> 6000 us). I've updated the BIOS and tried every combination of driver and component enabling/disabling I can think of. The DPC latency is extremely high from the initial Windows install with no drivers installed. Adding drivers seems to have no effect on the DPC latency. Before purchasing the laptop I found this review: http://www.notebookcheck.net/Review-HP-ZBook-17-E9X11AA-ABA-Workstation.106222.0.html where the DPC latency measurement (middle of the page) looks OK. Of course, this is the prior version of the laptop and I believe it does not have the PCIe SSD. Combining that with the fact that I get fine performance when running from the HDD I am led to believe that the PCIe SSD is the cause of the problem. Has anyone found a solution to this problem? As it stands right now my zBook is not usable for digital audio work when running from the PCIe SSD. But it cost me a lot of money so I'd sure like to use it...! Thanks, rgames

Hi mooktank, No solution yet but, as of about six weeks ago, HP at least acknowledged that it's a problem (finally). I reproduced it perfectly on another zBook 17 g2 and another PCIe SSD in the same laptop and HP was able to reproduce the problem as well. So the problem is clearly in the BIOS or with some driver related to the PCIe SSD. It could also be with the firmware in the drive, itself, but I can't find any other PCIe drives in the 60 mm form factor. So there's no way to see if a differnt type of drive would fix the problem. My suspicion is that it's related to the PCIe sleep states - those are known to cause exactly these types of problems because the drive takes quick "naps" to save power and there's a delay when it is told to wake back up. That delay causes a delay in the audio buffer that results in pops/crackles/stutters that would never be noticed doing other tasks like video editing or CAD work . So it's a problem specific to folks who need low-latency audio performance (very few apps require low latency audio - video editing, for example, uses huge buffers with relatively high latency). A lot of desktops offer a BIOS option to disable those sleep states but no such option exists in HP's BIOS for that laptop. In theory you can do it from within Windows but it doesn't have an effect on my system. That might be one of those options that Windows allows you to change but that actually has no effect. One workaround is to disable CPU throttling. That makes the CPU run at full speed all the time and, I believe, also disables the PCIe and other sleep states. When I disable CPU throttling, DPC latency goes back to normal. However, the CPU is then running full-speed all the time so your battery life basically goes to nothing and the laptop gets *very* hot. Clearly that is not necessary because the laptop runs fine from the SATA SSD. HP needs to fix the latency problem associated with the PCIe drive. The next logical step is to provide a BIOS update that provides a way to disable the PCIe sleep states without disabling CPU throttling, like on many desktop systems. The bad news is that HP tech support is not very technical, so it takes forever for them to figure out what I'm talking about. It took a couple months for them to start using the DPC Latency checker. Hopefully there will be a fix at some point... in the meantime, I hope that HP sends me a check for spending so much time educating their techs on how computers work. And for countless hours lost re-installing different OSes only to show that the performance is exactly the same as shown in the DPC Latency checker. rgames

Failed to initialize Databank exception when run from OLT

HI All,
I've created a script with an associated databank,that runs perfectly fine when run from OpenScript. But when I run from OLT, the following waring is encountered.
Start failure message from agent "OLT Server": oracle.oats.common.databank.DatabankException: Failed to initialize Databank 'Forms.forms'
Stopped Autopilot because of error on agent "OLT Server".
Name of my DB is : forms
and Script name is :Forms
Please let me know the solution for this.
Regards,
Karthik
Edited by: user777720 on May 21, 2013 5:00 AM

Have you tried changing the parameter in the Assets/Databank "Save Path" from "Relative to current script" to "Relative to a repository"?
Regards, Ian.

Hizzing / bad sound when running from battery power (Ups)?:

Why is my computer (Imac) emitting a hizzing sound when running from the UPS (battery)? I am testing a offline UPS type: POWERWARE Eaton Protection Station UPS 500VA 250W. My Imac is suppose to use max 200 watts of electrity (Imac 24 inch. intel 2.8 Ghz, 4 GB memory). When running from AC there is no sound. When testing (pulling out the cord on the UPS the Imac starts emitting a disturbing hizz / sound)???

I solved it my self. It was OK (no buzz and fuzz) when it was plugged in (when the electicity line was down once and I was running on the UPS battery).....

Hyperlink in pdf is missing when run from server.

Hello,
I create a link for a field in a report (using Hyperlink tab Hyperlink information). When I export the pdf from Crystal Report, I could see the link when mouse over the field. But when I run the report from opendocumentfrom server) , the link is missing. Does Crystal Report support hyperlink in pdf when run from server? Or do I miss anything?
Thanks for your help in advance.

Moving to BusinessObject forum

Microsoft Dynamics AX WebSession() is null in Enterprise Portal when running from a List Page.

Microsoft Dynamics AX WebSession() is null in Enterprise Portal (EP) when running from a List Page.
The WebSession() works for a detail page, but nor a list page in EP.
Does anyone know of a workaround to this issue?
Thanks.
Scott

Hello,
You should ask in the Microsoft Dynamics Community Forums.
Karl
When you see answers and helpful posts, please click Vote As Helpful, Propose As Answer, and/or Mark As Answer.
My Blog: Unlock PowerShell
My Book:
Windows PowerShell 2.0 Bible
My E-mail: -join ('6F6C646B61726C406F75746C6F6F6B2E636F6D'-split'(?<=\G.{2})'|%{if($_){[char][int]"0x$_"}})

Scim makes leafpad take a while to load, except when run from terminal

Leafpad normally loads up in an instant. But with scim running (More specifically with the required environment variables exported. Scim simply running without the environment variables does not cause the problem, but then scim does not work.), although it shows up immediately, the scrollbar, menubar etc are greyed out for a few seconds and the program cannot be used until it is fully loaded.
I'm sure this is specifically a leafpad problem, because there is no noticable lag in other programs. (Mousepad for example is fine.) However, the fact that it loads immediately when run from a terminal scares me. Why doesn't gmrun (and the fvwm menu) work just like a terminal? Is there a possible fix to this problem?

droog wrote:
I'm not having this problem as far as i can see, I use fvwm and scim already so installed leafpad to test and it starts instantly from fvwm's menu or terminal.
from gmrun leafpad starts instantly too so maybe i'm missing something.
what are you exporting?
Just the normal:
export XMODIFIERS=@im=SCIM
export GTK_IM_MODULE="scim"
export QT_IM_MODULE="scim"

Java application behaving differently when run from netbeans

Similar Messages

Maybe you are looking for