Java Error Messages In Abap Stack

Hi,
We have to implement a scenario where we to send the error messages generated by Java Stack to ABAP stack.Plz help me with the scenario.Thanks in advance..Mahesh

IR and ID are your JAVA stack....any error in them needs to catched using an Alert in ABAP....
Making use of the blog given define your alert for Integration Engine error and for Adapter Engine error.
Is your business requirement looking for something specific other than this? If yes, then get some more data from them so that other experts will help you with the exact solution.
Regards,
Abhishek.

Similar Messages

Deleting error messages in ABAP stack and JAVA stack

Hello,
found some useful answers here about deleting messages
which are successfully delivered!
What I miss is an answer about:
a) Error messages in RWB
In Component monitoring -> Archiving you can plan a job to delete messages in status "successful" or "Cancelled with errors".
To cancel jobs you have to do this one by one. With reaction time from page manual cancellation needs hours for 100 messages (Ok, there is a multiple selection button you can use to tag per list screen!).
Now I have lots of message here
- System error
- to be delivered
- cancelled with errors (from system, special case, see next question)
ready to be erased (yes, sure about that!)
Is this the only way here to proceed?
Other question: looks like there is a default time frame for the job which looks like it is more than two months for "successful". "Cancelled with errors" is only deleted from list when reaching this status with the available button "Cancel" but not for messages with status "Cancelled with errors" set by the system.
Any chance to change that time frame.
And what about the messages "Cancelled...." by the system?
b) ABAP stack
OK, delete job is running. But looks like there is a default time frame "delete older than 2 months" (different from a! where it is more than 2 months)
I tried to delete some error messages with function "Cancel message with errors".
Now these messages are cancelled in SXMB_MONI (displayed with different status sign "Pencil").
Starting deletion job has no effect on them. Why? Because they are cancelled today and are not considered by the time frame of the deletion job?
Any help is appreciated!
(This tool is confusing me more and more! )
Hm, looks like nobody knows about this issue?
Regards
Dirk

Hi Dirk,
I am also facing the issue for deleting the messages with errors or if i have cancelled them.
Did you find any solution for these issues. Kindly let me know if you have find out any solution.
thanks
Gopesh

Error message from ABAP to BW portal

Hi
I need to write error message from ABAP to BW portal.
If I write as usual: message E001(ZBW).
Then I get a dump in portal.
Does anyone know how to post error message in this case?
Thanks.

Hi,
You need to use the function module RRMS_MESSAGE_HANDLING to post any kind of messages in the report output/web template or portal.
You can pass the values trough the below parameters:
              I_CLASS = 'ZBW'
              I_TYPE   = 'W'
              I_NUMBER = '006'
Regards,
Shilpa

Error message from ABAP to portal

Hi
I need to write error message from ABAP to BW portal.
If I write as usual: message E001(ZBW).
Then I get a dump in portal.
Does anyone know how to post error message in this case?
Thanks.

Hi
Good
Check the below sdn link.
portal runtime error in BW
Thanks
mrutyun^

I have Mac OSX 10.5.8 and get java "error" message when trying to use research tool on Morningstar Java referred me to Apple but they had no update.Any ideas? thanks.e

I have a imac OSX 10.5.8 and get a java "error" message when trying to use a research tool on Morningstar.Java referred me to Apple but they had no updates. Any ideas? thanks.

Well I solved my problem.
What still doesn't make sense though is that dragging iTune audio files directly on to the iTunes application icon gave me the error message... which is why I originally discounted it as being a potential link problem. If I had been able to get files to open normally (i.e. without an error message) I would have known it was a simple link problem. Strange.
Anyway... relinking my folder of audio files did the trick.
If you don't already know how here are the steps...
iTunes > Preferences > Advanced > click on the "Change" button and browse to the folder that contains all of your iTunes audio files... that's it.

Error messages in ABAP program are stored in which table

hi all,
Can anyone tell
error messages in ABAP program are stored in which table??

Hi Sir ,
Please have a look below .Hope it is suitable and simpler solution for your question.
Please do reward if useful.
Thankx.
Fuction module for storing error messages ->'format_message'
for example...
data : v_message(100) type c.
call transaction NNNN mode A update S messages into it_messages.
loop at it_messages where msgty = 'E'.
call function 'format_message'
exporting
*it_messages details
importing
v_message.
write :/ v_message.
clear v_message.
endloop.
Anothe method - ->
Here is a sample of the program code for that:
LOOP AT it_messtab.
CALL FUNCTION 'FORMAT_MESSAGE'
EXPORTING
id = it_messtab-msgid
lang = it_messtab-msgspra
no = it_messtab-msgnr
v1 = it_messtab-msgv1
v2 = it_messtab-msgv2
IMPORTING
msg = g_msg
EXCEPTIONS
OTHERS = 0.
IF it_messtab-msgtyp = 'S'.
it_sucess-sucess_rec = g_msg.
it_sucess-lifnr = it_header-lifnr." Based on your field
it_sucess-tabix = v_lines.
APPEND it_sucess.
ELSEIF it_messtab-msgtyp = 'E'.
it_error-error_rec = g_msg.
it_error-lifnr = it_header-lifnr.
it_error-tabix = v_lines.
APPEND it_error.
ELSE.
it_info-info_rec = g_msg.
it_info-lifnr = it_header-lifnr.
it_info-tabix = v_lines.
APPEND it_info.
ENDIF.
ENDLOOP.

EM Repository - Java error message

Hi!
EM Repository successfully created, however this Java error message appears:
INFO: Repository successfully created
Apr 23, 2010 12:58:20 PM oracle.sysman.emcp.EMReposConfig uploadConfigDataToRepository
INFO: Uploading configuration data to EM repository (this may take a while) ...
Apr 23, 2010 1:00:06 PM oracle.sysman.emcp.EMReposConfig invoke
INFO: Uploaded configuration data successfully
# An unexpected error has been detected by HotSpot Virtual Machine:
# EXCEPTION_ACCESS_VIOLATION (0xc0000005) at pc=0x0c5598ca, pid=336, tid=2392
# Java VM: Java HotSpot(TM) Client VM (1.5.0_17-b03 mixed mode)
# Problematic frame:
# C [oranl11.dll+0x498ca]
# An error report file with more information is saved as hs_err_pid336.log
# If you would like to submit a bug report, please visit:
# http://java.sun.com/webapps/bugreport/crash.jsp
What could this mean?
In connection with post:
Problem with recreating EM repository
Edited by: user545194 on Apr 23, 2010 4:26 AM

Hi!
I solved the problem in the meantime.
Solution steps for anyone who had the same problem:
1. Uninstall Java Runtime, version 6.
2. Cleanout Windows Registry
3. Reboot machine
4. Download and install Java 1.5
CMD
5. Set ORACLE_HOME= Your path to Oracle home directory
6. Set ORACLE_SID= Your DB server
7. Recreate EM Repository
Result should be a clean EM installation.
Cheers!

Verbose Java Error Message and How to Turn Off

Hello Everyone,
Does anyone know of a way to turn off the Verbose Java Error messages that are generated via the Portal? Is there a Portal parameter or perhaps a parameter in the Config tool that can be used? I am simply trying to limit what is displayed to the user when error messages are generated.
Thanks,
Scott

Hi,
you mean the cryptic error message like:
Portal runtime error
Exception ID
There's a PAR: com.sap.portal.runtime.system.hooks.par
You should check the code, maybe this is the application responsible for these error message. If so, you'd have to make the modifcations there.
For 404, 401, etc, check:
http://wiki.sdn.sap.com/wiki/display/EP/CustomizingErrorMessagesinPortal
br,
Tobias

GETTING JAVA ERROR MESSAGE

does anyone knows the fix to java error message i am getting on my BB curve? I recently upgraded my OS to 6 and since then everytime after reboot its giving me error and as well, won't install my bubble breaker

Hi I have same problem with other problem first I experince uncaught exceptin. Java.lang.error. And after some time second error net.rim.device.api.system and now when I am working on BB suddenly the colors evaport and Screen become white. Are these problems are Java Related?or Software? Or it is technical problem

Java error message received when downloading torrent...help

I receive the JAVA error message detailed when trying to download a torrent file on my laptop. I have two browsers installed, Firefox and Internet Explorer. I do not get the message if I download via I.E. so the problem is a Firefox/Java one. the message reads :
java.lang.ClassNotFoundException: org.gudy.azureus2.ui.swt.Main
at java.net.URLClassLoader$1.run(Unknown Source)
at java.security.AccessController.doPrivileged(Native Method)
at java.net.URLClassLoader.findClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at sun.misc.Launcher$AppClassLoader.loadClass(Unknown Source)
at java.lang.ClassLoader.loadClass(Unknown Source)
at com.exe4j.runtime.LauncherEngine.launch(Unknown Source)
at com.exe4j.runtime.WinLauncher.main(Unknown Source)
Any help greatly appreciated. Java version up to date and correct version. (Why does it work with I.E. and not Firefox ??)

Hmmm. Bang goes the theory of trying to get a heads-up on a 2324 with the other message.
The following is a better bet with a 2330 (rather than a 2324), but it might be useful to get the possibility off the table.
Let's try running a disk check (chkdsk) over your C drive.
Windows 7 instructions in the following document: How to use CHKDSK (Check Disk)
Select both Automatically fix file system errors and Scan for and attempt recovery of bad sectors, or use chkdsk /r (depending on which way you decide to go about doing this). You'll almost certainly have to schedule the chkdsk to run on startup. The scan should take quite a while ... if it quits after a few minutes or seconds, something's interfering with the scan.
Does the chkdsk find/repair any damage? If so, does itunes launch without the 2324 afterwards?

Java Error Message at Leopard Startup - anyone know how to fix pls?

I installed Leopard two days ago on G5.. ran no probs for two days and then - up pops error message. Have called Applecare and they have no info to help. IF ANYONE HAS ANY HELP I'D BE VERY VERY GRATEFUL. Here's the error message. Thanks!! i
"CANNOT LAUNCH JAVA APPLICATION
Uncaught exception in main method:
java.lang.NoSuchMethodError:
javax.security.sasl.Sasl.setSaslServerFactory(Ljavax/
security/saslSaslServerFactor;)V"
------------------------------------------------------------

As I posted to another discussion on the topic:
Thanks to all of you for your help with this frustrating problem. I think I lucked into the solution.
A look at my library/logs/crashreporter pointed to a problem brought on by a file associated with a program developed by igeekinc, a Japanese firm that makes backup and rescue software. Names connected to igeek include Prosoft, Indelible, Desktop Backup, Data Backup, and others.
My startup items file included the Executor file related to Indelible which seems to have been placed there some years ago when I tried out Prosoft's Data Backup.
I found a Data Backup folder within my Applications folder. It had an uninstaller program. Clicking on that removed the Data Backup, the Indelible Executor, and the Java error message.
Fingers crossed.
Gary

How can I get a SOAP Error message in ABAP ?

Dear all.
I'm trying to get SOAP Error message during XI Interface.
I've got an Error ( T-code : sxi_monitor ) and I need to get the Error message and write to screen.
I used
CATCH CX_AI_APPLICATION_FAULT.
CATCH CX_AI_SYSTEM_FAULT.
but couldn't get the error message.
The Error occured as below.
<SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'ZTSD0030' (structure 'stmt1'): java.sql.SQLException: FATAL ERROR: Column 'ORDER' does not exist in table 'ZTSD0030'</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I exactly need 'BOLD' style message.
Any help is appreciated.
Thanks!

Hi,
This is an application fault,
error log clearly saying that''ORDER' does not exist in table 'ZTSD0030'.
these are specific to interfaces, in order to handle those
u need to configure apllication log at 'SLG1' t.code.
i mean, u have to use following function moules to handle application log in ABAP Proxy .
i.e
APPL_LOG_WRITE_HEADER
APPL_LOG_WRITE_MESSAGES
APPL_LOG_WRITE_DB.
warm regards
mahesh.

Separating Java add-in from ABAP Stack server

I have installed an ABAP Stack and added the JAVA add-in on the same physical server. Now I would like to have the JAVA add-in run on a physically different server. ABAP on Server1 and JAVA add-in on server2.
What is the process to move the add-in to the new server? What parameters/values need to be changed?
Thanks!
Steve E.

Hi Stephen,
I think Java Standalone is the only (official) option you have, I don't know the way of physically separating J2EE add-in from ABAP stack in dual-stack systems (you can separate CI from DB, or SCS in the cluster env but not add-in from ABAP).
Regards,
Mike
Message was edited by:
Mike Puzankov

Portal Java error message

I keep getting the following error message, seemingly at random when loading pages in the portal. Usually a refresh is enough to get the page to load, but I cannot find the cause of this problem. Any help is greatly appreciated.
<FONT CLASS=PortletText1>Error: The servlet produced the following error stack.
java.lang.InterruptedException
     at java.lang.Object.wait(Native Method)
     at java.lang.Object.wait(Object.java:420)
     at oracle.webdb.page.BaseContentRequest.getResponseHeaders(Unknown Source)
     at oracle.webdb.page.PageBuilder.getMetaData(Unknown Source)
     at oracle.webdb.page.PageBuilder.process(Unknown Source)
     at oracle.webdb.page.Main.doRequest(Unknown Source)
     at oracle.webdb.page.ParallelServlet.doGet(Unknown Source)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:244)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:336)
     at com.evermind.server.http.ResourceFilterChain.doFilter(ResourceFilterChain.java:66)
     at oracle.security.jazn.oc4j.JAZNFilter.doFilter(JAZNFilter.java:283)
     at com.evermind.server.http.ServletRequestDispatcher.invoke(ServletRequestDispatcher.java:539)
     at
com.evermind.server.http.ServletRequestDispatcher.forwardInternal(ServletRequestDispatcher.java:285)
     at com.evermind.server.http.HttpRequestHandler.processRequest(HttpRequestHandler.java:771)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:152)
     at com.evermind.server.http.AJPRequestHandler.run(AJPRequestHandler.java:72)
     at EDU.oswego.cs.dl.util.concurrent.PooledExecutor$Worker.run(PooledExecutor.java:802)
     at java.lang.Thread.run(Thread.java:484)
</FONT>
-------

Had the same issue after installing SP12 -
Try to wait till all the nodes in the SAP Management are green
and make sure that the DB is up and running.
For us it was just a matter of time. We received the error while trying to log in the portal while the services were still initializing.
Adi Jabkowksy

Installing Java add-in on ABAP Stack

Hello Gurus,
We have recently upgrade from SAP R/3 4.7 ext. 20 SR2 to ECC 6.0 SR3 on Solaris platform using Oracle 10g. We are on Non-unicode system and on Single Stack i.e. AS ABAP only.
Now as new requirement comes up in organization, we need to install additional Java Stack on upgraded system. Please help me in provide some details to proceed further.
1. Advantages of JAVA Stack (is there any performance issues after installing Java Stack?).
2. How to install Java Stack with ABAP stack in Cluster Environment.
Early response is highly appreciated.
Regards,
Kshitiz Goyal

> We have recently upgrade from SAP R/3 4.7 ext. 20 SR2 to ECC 6.0 SR3 on Solaris platform using Oracle 10g. We are on Non-unicode system and on Single Stack i.e. AS ABAP only.
>
> Now as new requirement comes up in organization, we need to install additional Java Stack on upgraded system. Please help me in provide some details to proceed further.
There are two issues here:
a) double stack instances are deprecated, they shouldn't be installed any more. Install the Java instance as a separate SID, at best on a separate machine (or on a separate Solaris zone on the same machine). See Note 855534 - Dual Stack and SAP Business Suite 7
b) Java stacks with non-Unicode backends are not supported (see Note 975768 - Deprecation of Java features with non-Unicode Backend)
You may be able to technically install the Java AddIn with "some special DVD" but because your backend is non-Unicode this configuration would be unsupported.
I highly suggest you first convert your system to Unicode before trying to connect them to a Java system.
Markus

Java Error Messages In Abap Stack

Similar Messages

Maybe you are looking for