Java-only, Component based message alerting - loopback to sender system

Dear guys,
we are using the alert framework availbale on PI 7.11 to notify the sender system if there is an alert for specific interfaces. In that case a customer function module is called giving the message id of the request message (message is sent via ABAP proxy). As a result the according entry in customer table is updated.
The implemntation is based on the BADI ALERT_MODIFY_TEXT and uses the standard function module ALE_BAPI_GET_UNIQUE_RECEIVER to determine the system /rfc destination to send the alert notification.
This solution works fine so far.
As PI 7.11 dual stack is not the latest release, we are thinking of upgrading to current PI/PO release. In this context also shift to java-only installation is contemplated which will need an alternative solution for the described alert/error notification loopback.
Are there any possibilities analog to BADI to implement such a solution?
What are your approaches regarding this requirement in the context of java-only?
Any help/thoughts appreciated.
Best regards,
Jochen

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Similar Messages

How to exclude synchronous interfaces from component based message alerting

Hi Pi experts,
We are configuiring Alerts in PI 7.3 single stack.If we have 'n'number of interfaces, and if we configured general alerts for all.How to exclude synchronous interfaces in that.Alerting is for asynchronous interfaces only.How to do that.
Please advice on this.
Regards
Suneel

Hello,
>>What are your approaches regarding this requirement in the context of java-only?
I would suggest you to schedule jobs like this:
Customize Alerts Using Job in PI 7.31/PO
>> alerts are consumed according to the given interval and not in "real time" when error occurs, today solution using BADI is "real time" - if possible I would prefer "real time" solution
Check this:
Michal's PI tips: How to trigger an alert for Component Based Message Alerts (CBMA) via "API" ?
>>an separate service determine the actual alert count would be helpful to provide the correct value for maxAlerts, this have to be called beforehand
I haven't tried it but i think u can do that, since these consumers are nothing but JMS queues only so i think there will be a method to read number of alert counts.
>>In history I saw emails generated by the standard alert consumer which only contain details for the first alert, in my case I need details especially the message id for all errorneous messages
If ur max alert parameter is greater than 1 then u should see multiple alert text (along with message id and other details) in ur email message.
Thanks
Amit Srivastava

Issue while creating Component Based Message Alerting in PI 7.31 Dual Stack

Hi,
We tried to implement Component Based Message Alerting following the steps mentioned in the below blog.
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Ours is PI 7.31 dual stack. However, after setting up the job with my own user id, I am getting the below error inside the log of Jobs tab:
javax.jms.JMSSecurityException: You do not have permissions: action alertingVP.queue and instance:name alertingVP.queue
action consumer
instance jms/queue/xi/monitoring/alert/ALERT-TO-MAIL
Please let us know what permission is required to set up the job.
Thanks,
Rahul

Hi,
Now I am able to receive alert in my mailbox. But it's coming with improper content.
I have set up the job at an interval of every 2 minutes in NWA, and in case if only 1 message fails in IE, in ideal case, I should receive only 1 message details in alert.
However, in every 2 minutes, I am receiving junk data and the number is increasing for the particular scenario for which the alert has been created. Also the Error Category mentioned is showing improper.
But in table SXMSALERTCONTENT I am able to view only the newly added failed entry.
An erroneous alert email content is pasted below:
63 messages failed for "Test_XXX" on "af.s0i.saps0i"
Root cause: -1
To navigate to the failed messages in the local message monitor use this link
The first 1 messages of that data collection:
"AdapterNamespace": "http://sap.com/xi/XI/System",
"AdapterType": "File",
"Channel": "FileSender_XXX",
"ChannelParty": "",
"ChannelService": "XXXXX",
"Component": "af.s0i.saps0i",
"ErrCat": "",
"ErrCode": "",
"ErrLabel": "-1",
"ErrText": "Configured source directory '\\Outbound\\XXX\\CREMAS' does not exist",
"FromParty": "",
"FromService": "XXX",
"Interface": "Z_CREMAS_SUSMM.CREMAS03",
"Namespace": "urn:sap-com:document:sap:idoc:messages",
"RuleId": "3a64dd6e1b1d3e58aff62ea70c97cb80",
"Timestamp": "2013-02-01T09:43:23Z",
"ToParty": "",
"ToService": ""
The failed message however do not relate to the 'source directory does not exist' issue. Please help.
Thanks,
Rahul

Component based message alerting

Hi,
I am working on component bvased message alertig in SAP PI 7.4 (dual stack). As per the Michal's blog i have define everything in PI.-
http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting
Also i have configured Configuration -> Infrastructure -> JAVA System Properties -> XPI Services: AF Core -> and choose tab Services .
Set the value of the alerting.target service property to 1.
and alerting.isActive (value true).
But still i am not getting mail in mail box.
When i check the log viwer i found two logs saying:
Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:1344010011108-000000008399) started on Thu, 5 Jun 2014 03:52:43:011 EDT by scheduler: c0000173a37f11e2b6ab00237d240438
Job AlertConsumerJob (ID: 5fe771e0ec86100082e50000002ab43a, JMS ID: ID:11344010011108-000000008399) ended on Thu, 5 Jun 2014 03:52:43:044 EDT
Could some body help me in this .
Thanks,
Anurag

Hi Anarug,
I am not sure whether it is solved.
From the log entry from the AlertConsumerJob, it seems that this job is running fine,
but it is not finding any alerts.
That means probably, no alert events are thrown by any rule.
So you should focus on that part first and see if you have any aggregated alerts in a job run.
I had some strange experience with Alert Rules that did not have all Message Statuses checked.
As soon as you uncheck any of the Message Statuses in the rule (for example any unusual adapter technology), the rule will not work.
This is a bug in my 7.31 system and I am just trying to fix it using SAP Note 1968989.
Please check if this Note might fit your situation.
Anyway, try to use a DEFAULT-RULE, which you can create in the ID by checking the box "create default rule" when defining a new alert rule.
Other things to check:
- are you using Integrated Configuration or generate at least errors in the Adapter Engine?
For errors in the (ABAP) Integration Engine, the whole story is similar but completely different.
Cheers, Jochen

Is there any open sourse java grid component based swing?

Hello everyone,
I've try to google in many ways,but can't find any.
If some body knows,Could you tell me the ?
Thanks a lot!

I'm not a native English speaker,feel so sorry that you can't get my meaning.
I'm looking for a TABLE COMPONENT that can do such things:
Show/Hide columns
Move columns
Lock columns
Row headers
context sesitive popup menus to access all the functions
Multiple cell renderers and editors including JFormattedTextField, Date (including
popup Calendar), JProgressBar, JScrollBar, JSpinner, JButton, JCheckBox, Color, JTextField,
JRadioButton, JComboBox, etc
Copy and paste from Excel
Background Image Support
Image Support for individual cells...(the common needs for table component)
is there any open source ones?

Since installing iOS 8, why do I receive new text message alerts when I send text messages?

When I send an outgoing text message, I receive a new text notification in the form of a badge on my text message app. Any ideas how to make this stop?
Specs:
iPhone 5s
iOS 8.0.2

Sonds like you guys are sharing the same apple id. Go to settings - message - send and receive and make sure your phone number is the default for both phones.

PI 7.31 - Component based alerting v/s Alert framework like 7.0

PI Experts,
We are in the process of upgrading PI from 7.0 to 7.31. In current PI-7.0, We are using Alert framework for notifying us for the failed messages in PI.
PI-7.3 has the the new feature of Component based alerting, while implementation, we have a choice between "Component Based Alerting" and "Alert FrameWork".
1.     Can someone guiide me on what are the advantages of using "Component Based Alerting" v/s "Alert Framework" in PI-7.3?
2.     If we choose "Component Based Alerting" now, then can we switch it back to "Alert Framework"? If yes, how difficult it is? What are the configuration steps for the "Component Based Alerting"?
3.     If we choose "Alert Framework" now, then can we switch it back to "Component Based Alerting"? If yes, how difficult it is? We would be able to use our current alert configuration and alert rules?
Thanks.
MP

Hi,
>>>>1.     In current AF, we get the alert for the new error if we have confirmed the alert for the same rule in the system otherwise we do not get a alert for the new error.How the alert confirmation works in CBA
depends how you consume alerts - if you do it with SOLMAN for example it's there (for "number of hours" and/or "until" AFAIK)
>>>>2.     Is there any way we can move the current alert rules of AF to CBA in 7.3?
not sure if with 7.3 but there is some upgrade function in 7.31 as per:
http://help.sap.com/saphelp_nw73ehp1/helpdata/en/b2/58b14b70744d0db55599230d2c5bce/frameset.htm
quote:
"In case you upgrade your system to enhancement package 1 for SAP NetWeaver 7.3, and in case the “classical”alerting function (already available prior to enhancement package 1 for SAP NetWeaver 7.3) is switched on, the CTC wizard asks you if you like to switch on the new component-based message alerting."
but I've never tried it so don't know if/how it works,
Regards,
Michal Krawczyk

PI 7.4 message alert to ECC backend.

Hello Experts,
I am busy with a project for IDOC2JDBC scenario.
In the best case scenario things are working fine, and i get the recors to the external SQL database.
My question is, if there is an error occured in the sql statement or other JDBC error, the communication channel should send an error message to the IDOC sender of the backend ECC.
I am following this tutorial ( http://scn.sap.com/community/pi-and-soa-middleware/blog/2012/03/25/michals-pi-tips-component-based-message-alerting).
How can i specify the backend as the receiver for the alert, or is there another way of doing this task?
Any suggestions would be appreciated.
Regards,
Antony.

Hi antony,
In this case, I think that the better way is to create a technical bpmn to send error back to the sender.
Pls refer to the link below:
Detecting Technical Errors in NetWeaver BPM

Nokia 6500 message alert

any ideas as to why my 6500 classic plays message alert when you send a message now i realise it is meant to do it when you receive a message but not when you send one , my partner has the same phone but hers does not do it

Menu-->Settings-->Profile--> select the profile you normally use..and see if there are any options for customizing available..
--------------------------------------------------------------------------------------------------------------------------------------------------------If you find this helpful, pl. hit the White Star in Green Box...

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

I just got the iPhone 5 and noticed that the message alerts will only alert once . I have it set up as 3 times and its not working . Please help. I'm running 6.0.2 and I really starting to get ****** off with apple products

Instead of getting annoyed, read the User's Guide and try basic troubleshooting.

Message flow in SAP PI 7.31 JAVA only for ABAP Proxy synchronous scenario with Oracle DB

Dear Experts,
I am working on a synchronous scenario Sender ABAP Proxy <===> SAP PI 7.31 JAVA only <===> Oracle Database.I have successfully
configured all the proxy configurations as well both Sender SOAP and JDBC receiver channels are showing no error when pinged from
Cc monitoring in NWA.
1.During testing at Tx SPROXY , I am triggering a message and after 5 minutes I receive an PARSING error message with 2 messages in ECC
local IE i.e. Tx SXMB_MONI.
Note : In NWA , I can see only 1 message that too in cancelled status.
2.Seeing the trace of the messages I assume that the messages have not moved from sender ECC system. I am still confused with flow of message
from the Message Audit log. Audit log of error messages.Could any one share the full Audit log of a successful message generated in SAP PI 7.31 JAVA only.
3.I observed that the QIN Scheduler status in ECC is in INACTIVE status. There is no queue id for 2 messages generated in ECC. Does
it should in ACTIVE status in Tx SMQR..
Regards
Rebecca

Hi Thomas,
Valuable inputs..
1. Since I don't have any audit log for successful message, would you be able to share referring to the
below screenshot whether the message was put into receiver JDBC adapter and JDBC adapter tried to retrieve the Select response from Oracle Database.
2.I have done some setting in Advance mode of the receiver JDBC to increase the time out and other parameters as per SAP note but still the issue is same. If you perhaps have some experience in such scenarios, please share some input so that I can ask the Oracle Database administrator exactly what is required from our side.
3.Regarding the slow response from Oracle , there was some suggestion that the datatype of the request and response should match the column name of the Oracle database. I did that.. Do you have any more suggestion that may be hampering the generation of the response message from the Oracle like SAP note or document.
Regards
Rebecca

Personalized txt message alerts based on who is sending it?

Is there anyway on the Iphone to set different text message alerts based on who is sending the text? I am a sysadmin and currently I have our servers sending txt message alerts to my corp phone. I'd like set it to send to my iphone with the caveat of giving a different alert sound then other text messages sent by other people.
I just got my iphone yesterday, so please forgive me if there is an easy solution.

In short, no. You can change ring tones for various people however; no individual group alerts.

HTML viewer component based on Java AWT ?

Who knows about projects/sourcecode/etc. for a browser component based on only AWT and NO SWING ? I only need a simple HTMLViewer which does not use Swing (restriction because I want to run it on PDA with PersonalJava). I do not necessarily need a full blown browser, but just the most common and basic HTML tags.
Any help would be highly appreciated.
Kar;

no - I searched some time ago but theres nothing useful for free.
for money you get all you want!

Error in bootstrap within patching of NW PI 7.40 AEX (Java Only)

Hi all,
we are suffering an error witin patching a NW PI 7.40 AEX (Java Only)
In SUM we get the following error when SUM wants to stop / start system in execution phase
FATAL: Critical shutdown with exit code [2150] was requested due to [AS
Java
cannot be started; core service [tc~lm~nzdm~crrsrv] failed to
start]
We already checked note http://service.sap.com/sap/support/notes/1713021 for this with no luck.
We are getting the following output in bootstrap
Starting to initialize database connection
Exception occurred for component [internal/unkown] of type [unkown]
com.sap.engine.bootstrap.SynchronizationException: Storage access initialization failed due to OpenSQL error.Check if your db driver file is avail
able on the file system or if the user has correct permissions for that file
        at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:146)
        at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
----------==[ Caused by: ]==----------
com.sap.engine.frame.core.configuration.ConfigurationException: Error while connecting to DB.
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:171)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.PersistenceHandlerImpl.<init>(PersistenceHandlerImpl.java:50)
        at com.sap.engine.core.configuration.impl.cache.ConfigurationController.<init>(ConfigurationController.java:139)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.init(ConfigurationManagerBootstrapImpl.java:309)
        at com.sap.engine.core.configuration.bootstrap.ConfigurationManagerBootstrapImpl.<init>(ConfigurationManagerBootstrapImpl.java:59)
        at com.sap.engine.bootstrap.StorageAccess.<init>(StorageAccess.java:138)
        at com.sap.engine.bootstrap.Bootstrap.initializeSynchronizer(Bootstrap.java:79)
        at com.sap.engine.bootstrap.Bootstrap.main(Bootstrap.java:273)
        at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
        at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
        at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
        at java.lang.reflect.Method.invoke(Method.java:597)
        at com.sap.engine.offline.OfflineToolStart.main(OfflineToolStart.java:162)
Caused by: com.sap.sql.log.OpenSQLException: Error while accessing secure store: The check record (key "$internal/check") was not found in the sto
re although this store is encrypted..
        at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:104)
        at com.sap.sql.log.Syslog.createAndLogOpenSQLException(Syslog.java:143)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:143)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:115)
        at com.sap.engine.core.configuration.impl.persistence.rdbms.DBConnectionPoolImpl.<init>(DBConnectionPoolImpl.java:164)
        ... 12 more
Caused by: com.sap.security.core.server.secstorefs.FileInvalidException: The check record (key "$internal/check") was not found in the store altho
ugh this store is encrypted.
        at com.sap.security.core.server.secstorefs.SecStoreFS.openExistingStore(SecStoreFS.java:2048)
        at com.sap.sql.connect.OpenSQLConnectInfo.getStore(OpenSQLConnectInfo.java:793)
        at com.sap.sql.connect.OpenSQLConnectInfo.lookup(OpenSQLConnectInfo.java:784)
        at com.sap.sql.connect.OpenSQLDataSourceImpl.setDataSourceName(OpenSQLDataSourceImpl.java:128)
        ... 14 more
[Bootstrap]> Error during synchronization. More details: the previous log entries
Do you guys have any clue on this?
Any help would be greatly appreciated.
Many thanks
Jens

I'd like to share some updates on this:
We discovered, that the line having "$internal/check" within SecStore.properties was indeed commented out. However we did not do that manually. We removed the comment from that file manually (which might be a mistake) but in doing so we at least got some progress but having some other errors:
We find now following Messages in the dev-jstart-logfile:
* WARNING => SfCEventDispatcher::processQueue: rc 3 (invalid function argument) from SfCJavaProcHandler(server0)([mType=PROC_CMD, mRepl y=TRUE, pca=[cmd=GET_CALLSTACK, procId=2, arg=65], mpEvent= [mType=NODE_CMD, mReply=TRUE, nca=[cmd=GET_CALLSTACK, nodeId=2]]])
[sfxxevt.hpp 3152] F [Thr 01] *** WARNING => SfCNodeManager(server0)::onReply: command 2010 GET_CALLSTACK returned 3 invalid function argument.
Executing sapcontrol -GetProcessList you can see that all precesses are running but jstart is yellow (some processes are running). Checking the message Server logfile you can find:
[Thr 01] Wed Feb 26 14:32:03 2014 [Thr 01] LOGOUT: J2EE106864420 [10.6.1.174] (ENQ) [Thr 01] *** ERROR => MsSSend: NiBufSend (rc=NIECONN_BROKEN) to C1
(JC_rs174QSF_QSF_10) [msxxserv.c 13557] [Thr 01] *** ERROR => MsSSndInfo: cant send info request to C1
(JC_rs174QSF_QSF_10) [msxxserv.c 13778] [Thr 01] LOGOUT: JC_rs174QSF_QSF_10 [10.6.1.174] (DIA )
Any help would really be great.
Thanks and kind regards
Jens

How to find Traces in SAP PI 7.3 java only stack

Hello Experts,
How to find the trace logs and pipeline steps in sap pi 7.31 java only stack, which we will get in below areas,
1. In sap pi dual stack , SXMB_MONI (abap stack) in window 1
2. In sap pi dual stack , monitoring--->integration engine--->message monitoring----> xml messages(data base)
I already found some blog related to the logging but i doesn't help to find the traces which we get in SXMB_MONI (window 1, trace)
http://scn.sap.com/community/pi-and-soa-middleware/blog/2013/09/18/tracing-in-sap-pi-731-single-stack
Your suggestions are highly appreciated.
Thanks & Regards,
Venkat

Hi,
In Single stack we go for ICO instead of classical configurations(Pipe line steps(SA,RA,RD,ID)).
Link you are referring is to find the display of traces that you put in your UDF or Java mapping or XSLT mapping .
If you want to see the traces/payloads of end to end flow ,then you can see the same either in your communication channel monitoring/receiver channel or via message monitoring/adapter engine-->message log
If you want to see payloads in the below steps .you can also do so by following the below link.
Message Staging and Logging Options in Advanced Adapter Engine of PI 7.3x
Processing Step
Description
AM
After mapping step, but before outbound schema validation
VO
After outbound schema validation
BI
After sender adapter processing, but before inbound schema validation
MS
Before mapping step
VI
Before scenario look-up step (check if scenario is local Advanced Adapter Engine based or dual-stack based involving Integration Engine)
Regards
Venkat

Java-only, Component based message alerting - loopback to sender system

Similar Messages

Maybe you are looking for