Javascript error when inserting dynamic table in DW
Hi
Im using DW9 (CS3) and have problem.
When i klick on the 'dynamic table' button i get this error:
While executing insertObject in Dynamic Table.htm, a
Javascript error(s)
occurred:
Any sulution?
Please send me a copy fo the reply to my mail:
[email protected]
/Torbjörn
If that fails to solve the problem, then I recommend you
contact Adobe
directly and use one of your one-on-one support incidents.
http://www.adobe.com/support/programs/dreamweaver/index.html?tab:contact=1
Murray --- ICQ 71997575
Adobe Community Expert
(If you *MUST* email me, don't LAUGH when you do so!)
==================
http://www.dreamweavermx-templates.com
- Template Triage!
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
==================
"Torbjörn Sjögren" <[email protected]>
wrote in message
news:fa26gs$bns$[email protected]..
>I have tried several of the tips in the article. But no
luck.
> Did a reinstall of DW but no luck.
> I´m very thankful for any tips.
>
> "Murray *ACE*" <[email protected]>
skrev i meddelandet
> news:fa004o$np6$[email protected]..
>> Troubleshooting JavaScript errors in Dreamweaver
>>
http://www.adobe.com/cfusion/knowledgebase/index.cfm?id=tn_19105#dat
>>
>>
>> --
>> Murray --- ICQ 71997575
>> Adobe Community Expert
>> (If you *MUST* email me, don't LAUGH when you do
so!)
>> ==================
>>
http://www.dreamweavermx-templates.com
- Template Triage!
>>
http://www.projectseven.com/go
- DW FAQs, Tutorials & Resources
>>
http://www.dwfaq.com - DW FAQs,
Tutorials & Resources
>>
http://www.macromedia.com/support/search/
- Macromedia (MM) Technotes
>> ==================
>>
>>
>> "Torbjörn Sjögren"
<[email protected]> wrote in message
>> news:f9vu6c$lol$[email protected]..
>>> Hi
>>>
>>> Im using DW9 (CS3) and have problem.
>>> When i klick on the 'dynamic table' button i get
this error:
>>> ---------
>>> While executing insertObject in Dynamic
Table.htm, a Javascript error(s)
>>> occurred:
>>> ---------
>>>
>>> Any sulution?
>>>
>>> Please send me a copy fo the reply to my mail:
>>> [email protected]
>>>
>>> /Torbjörn
>>>
>>
>>
>
>
Similar Messages
-
Sharing Violation error when inserting a table
Hi Everyone.
I know this question has been asked before but no one seems to have a working solution.
We have Macromedia MX (6.1) installed on a room with windows 7 on all the computers, on a server 2008 network, connectiing to a server 2003 user area server. It seems to work fine until you try to insert a table which is different to the default options. It then throws up a sharing violation error to do with the table.htm file under the Application Data\Macromedia\Dreamweaver MX\Configuration\Objects\Common\ folder. The program then closes. The things I have tried to get this working so far are -
uninstall and reinstall
deletion of the Application Data\Macromedia\Dreamweaver MX\Configuration\ folder
changing location of Application Data\Macromedia\Dreamweaver MX\Configuration\ folder from network drive to local drive
making sure the user has complete ownership of the folder and the file in question. They do
checking the same problem exists with an adminstrator account and a normal user account. It does.
having the user log on to a windows XP machine connecting to the same server with the same log on account. This works fine! So almost certainly a problem with Windows 7.
runnning the dreamweaver program as administrator
changing where the site is saved to.
Im really all out of ideas. Yes i know that its an old version and the newer versions work a lot better, but this is all we have at the moment.
I really appreciate any help!Hi Chrissy,
According to the description, you were not able to save the workbook after you typo some VBA code. Which version of Office are you using? Are you save it manully?
Based on my understanding, this issue is not realtive to the code and it maybe a know issue about Office 2007. You can fix it via link below:
Description of the 2007 Office system hotfix package (Msoshext-x-none.msp): April 27, 2010
If you still have the issue save it manually, I would suggest that you reopen a new question in
Microsoft Community- Excel forum to get more effective response.
Regards & Fei
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey. -
Error when inserting into table - Undefined Variable
DB = Oracle 10.2.0.1
WEBSERV = Apache 2.0.55
LANG = PHP5
I have created (or more accurately, copied) a php script to insert data into one of my database tables when I press submit. The code is as follows (my connect string works fine and its included in the dbutils.php file):
<?php
if($submit == "submit"){
include "dbutils.php";
$query = "insert into users values (seq_user_usr_id.NEXTVAL, '$usr_name')";
$cursor = OCIParse ($db_conn, $query);
if ($cursor == false){
echo OCIError($cursor)."<BR>";
exit;
$result = OCIExecute ($cursor);
if ($result == false){
echo OCIError($cursor)."<BR>";
exit;
OCICommit ($db_conn);
OCILogoff ($db_conn);
else{
echo '
<html><body>
<form method="post" action="index.php">
<table width="400" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>Please enter a username:</td>
<td><input type="text" name="usr_name"></input><br></td>
</tr>
<tr>
<td><input type="submit" name="button" value="Submit"></input></td>
</tr>
</table>
</form>
</body></html>
?></p>I am getting the following error regarding an undefined variable:
[Fri Jan 20 13:11:22 2006] [error] [client 127.0.0.1] PHP Notice: Undefined variable: submit in C:\\Program Files\\Apache Group\\Apache2\\htdocs\\mywebsite\\test.php on line 3
Where would I declare this variable? It is just a check to see if the submit button is pressed as far as I can see. Any help would be greatfully appreciated.
W8I have changed the code to this:
<?php
if($submit == "submit"){
include "dbutils.php";
$usr_name = $_POST['usr_name'];
$query = "insert into users (column1, column2) values (seq_user_usr_id.NEXTVAL, '$usr_name')";
$cursor = OCIParse ($db_conn, $query);
if ($cursor == false){
echo OCIError($cursor)."
exit;
$result = OCIExecute ($cursor);
if ($result == false){
echo OCIError($cursor)."
exit;
OCICommit ($db_conn);
OCILogoff ($db_conn);
else{
$submit = $_POST['submit'];
echo '
<html><body>
<form method="post" action="index.php">
<table width="400" border="0" cellspacing="0" cellpadding="0">
<tr>
<td>Please enter a username:</td>
<td><input type="text" name="usr_name"></input>
</td>
</tr>
<tr>
<td><input type="submit" name="submit" value="submit"></input></td>
</tr>
</table>
</form>
</body></html>
?>And now I am getting the following error:
[Mon Jan 23 13:45:32 2006] [error] [client 127.0.0.1] PHP Notice: Undefined index: submit in C:\\Program Files\\Apache Group\\Apache2\\htdocs\\mywebsite\\test2.php on line 24Does anyone have any ideas?
I am struggling to find an example to work from to get this working. If anyone can point me to any literature that will explain the code so that I can work this out for myself that would also be a great help. -
ORA-06502: error when inserting into table via db link with long datatype
Folks,
I am getting the following error:
ORA-06502: PL/SQL: numeric or value error: character string buffer too small.
This occurs when an insert is done via a database link into a table that has a LONG data type for one of the columns, and the string contains some carriage returns and or line feeds.
I have checked by removing the db link, and inserting into a local table with identical column data types, where there is no error.
So this might be another db link bug?
So I need to remove the carriage returns and/or line feeds
in my pl/sql block in the page process. I have tried
l_text := REPLACE(l_text, CHR(10), ' ');
l_text := REPLACE(l_text, CHR(13), NULL);
but still getting the ORA-06502. Would really appreciate some advice here, please.
Cheers
KIMScott,
Time to 'fess up':
My fault sorry, the error was coming from another page process where I had allowed insufficient string length for one of the variables, and my error message did not identify the page process clearly.
This leads me to make a request for future releases, could the system error messages state which page process caused the problem?
One other thing I notice, and this might be a feature not a fault, the page processes are numbered: "Page Process: 3 of 5". However process 3 is not the 3rd one to be processed, and probably refers to the order in which they are created. Should the number reflect the process order?
Cheers
KIM -
Win32 exception in FormDesigner.exe error when inserting a table
I'm trying to insert a simple table on a document but every time I try I get a pop-up that "Adobe LiveCycle Designer ES has encountered a problem and needs to close." When I looked into it a bit further it appears to be an issue of "an unhandled win32 exception in FormDesigner.exe"
Any ideas?
Thanks!Found a solution: http://forums.adobe.com/message/2140571#2140571
-
Error when inserting or changing in a sorted table
Hi Experts,
When i am executing a webdynpro application it says Error when inserting or changing in a sorted table. Can any one help for this.
The termination type was: RABAX_STATE
The ABAP call stack was:
Method: GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_COMPONENTCONTROLLER~GET_CATEGORY_LIST of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: WDDOMODIFYVIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: IF_WDR_VIEW_DELEGATE~WD_DO_MODIFY_VIEW of program /1BCWDY/F9XHYWN4WKNMG4CDUGA8==CP
Method: DO_MODIFY_VIEW of program CL_WDR_DELEGATING_VIEW========CP
Method: MODIFY_VIEW of program CL_WDR_VIEW===================CP
Method: DO_MODIFY_VIEW of program CL_WDR_CLIENT_COMPONENT=======CP
Method: DO_MODIFY_VIEW of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW_PHASE_MODEL=====CP
Method: PROCESS_REQUEST of program CL_WDR_WINDOW=================CP
in ST22
Object Definition
DATA: lo_node TYPE REF TO if_wd_context_node,
lo_node_info TYPE REF TO if_wd_context_node_info,
lo_element TYPE REF TO if_wd_context_element.
Additional Data declarations
DATA: lv_key TYPE string.
Get context node.
lo_node = wd_context->get_child_node( name = 'DROPDOWNLISTS' ).
lo_node_info = lo_node->get_node_info( ).
Call method to fetch the categories.
CALL METHOD cl_hap_wd_start_page_ui=>category_get_list
EXPORTING
add_on_application = add_on_application
IMPORTING
t_categories = lt_categories.
Append Default selection entry 'All'.
lw_category-category_id = '00000000'.
lw_category-category_name = 'All'.
APPEND lw_category TO lt_categories.
Sort table after appending the new entry.
SORT lt_categories ASCENDING.
Loop through the category list and populate key(category_id) value(category_name) pair for
LOOP AT lt_categories INTO lw_category.
lw_key_value-key = lw_category-category_id.
625 lw_key_value-value = lw_category-category_name.
>>>>> APPEND lw_key_value TO lt_key_values.------>Here it throws an error
627 CLEAR: lw_key_value, lw_category.
628 ENDLOOP.
629
630 * Bind the category key-value pair to the context attribute.
631 CALL METHOD lo_node_info->set_attribute_value_set
632 EXPORTING
633 name = 'CATEGORY_LIST'
634 value_set = lt_key_values.
635
636 * Make the entry 'All' as default selected.
637 CALL METHOD lo_node->set_attribute
638 EXPORTING
639 value = '00000000'
640 name = 'CATEGORY_LIST'.
641
642 ENDMETHOD.
643
644 method GET_EMPLOYEES.
645Hello Durga,
from the error what I understood is lt_key_values is a sorted table and you are trying append a new line to it. Incase of sorted table you need to use the INSERT statement and not the APPEND statement.
INSERT lw_key_value INTO table lt_key_values.
BR, Saravanan -
" Error when inserting in PSA table RSTSODSPART" when loading into PSA
Hello,
Did anyone encounter something similar, and found a solution ?
BI 7.0 - EnhP 1 - SP5
When loading data from R/3 into PSA, we encounter following error message:
" Error when inserting in PSA table RSTSODSPART"
===============================================================
- the first datapackage is written successfully to PSA,
but from the second datapackage onwards the error message pops-up
" Error when inserting in PSA table RSTSODSPART"
- The original dataselection in the infopackage is somewhere stored
If the selection in the InfoPackage is reduced (e.g. only one document i.o. a period)
it stil starts loading according the original selection (the month)
- If we create a new InfoPackage and select very few data (only one datapackage)
then we can load to PSA succesfully, but when we load to DSO we can't activate the DSO.
- We remarked that:
Two versions of the PSA exist for that datasource 0FI_GL_40:
a Table(/BIC/B0000555000) in version 1 exists,
a Table(/BIC/B0000555001) in version 2 exists
Thanks in advance,
Best regardsHello All,
We had a problem similar to what Ilse Depoortere describes. The problem happens in our BW QA system a few days/weeks after it has been copied from Production. Data loads start failing with these two error messages:
RSM2 851 - Error when writing in PSA (Caller 32)
RSAR 130 - Error 7 when adding to PSA (Caller 70)
We have just implemented the fix described in note 1340371 (replaced the LIB_DBSL with patch level 247), and the problem is gone. Failed data load process chains can be restarted and finish successfully.
This has been a really useful discussion, thanks all! And thanks to my coworker Bob who found it.
Vince Vajda -
ME-807 System error: error during insert in table EKKO in SM13
Hello Experts,
I have been searching a lot in SDN and in google about the ERROR ME-807 System error: error during insert in table EKKO but still i have not got any satisfactory answer.
In ME31K when I create the contract and put some validation check on target value filed in BADI Implementation ME_PURCHDOC_POSTED while saving it .
Now after rectfying the valdiation checks and saving the contract again i get this ERROR in SM13 and i can not even see the contract in ME33K. It says that doument does not exist.
Please let me know what could be the possible reason for this.
Thanks,
NaveenHi Jan,
This ERROR is coming from a function module ME_CREATE_DOCUMENT .
The code snippet from where this error s comin is as below:-
DATA: LS_EKUB_NEW TYPE EKUB.
DATA: L_EBELP LIKE IND_EKKI-EBELP,
L_TABIX LIKE SY-TABIX,
L_TABIX_1 LIKE SY-TABIX,
L_EHP4_P2PSE_ACTIVE TYPE XFELD.
------- Bestellkopf hinzufuegen -
MOVE NEKKO TO EKKO.
INSERT EKKO.
IF SY-SUBRC NE 0.
MESSAGE A807 WITH 'EKKO'.
ENDIF.
Thanks,
Naveen -
How do I fix a javascript error when opening Dreamweaver?
DW CS6 recently started having 2 JavaScript errors while opening the application and at least 1 additional JavaScript error when using the Insert Image command. Can someone provide some advice on fixing this issue?
This will help -
Index to Dreamweaver FAQ
Look at the very first issue. -
ME 807: System error: error during insert in table KONV
Hi,
I got the below error when creating PO using ME21N, what should I do?
ME 807: System error: error during insert in table KONV
Thanks.During the creation of Purchasing Orders the system displays the message "Error during insert in table KONV". The problem is solved and I would like to share the steps we use to solve the problem.
You can get details of the error in the Business Workplace (T-Code SBWP) or through the transaction SM13. The details of the error are:
Function Module
ME_CREATE_DOCUMENT
Status
Update was terminated
Report
LEINUU03
Row
167
Message
ME807 System error: error during insert in table KONV
I applied the SAP Note 1610553 - BAPI_PO_CHANGE: Header conditions are not transferred which describes exactly the problem but it was not solved.
The solution was creating a new Purchasing Record and, before saving, remove all the conditions in Header level and save the document. After that, it's possible to create documents without problem. -
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE
제품 : AOL
작성날짜 : 2003-04-07
ORA-1722 ERROR WHEN SELECTING MFG_LOOKUPS TABLE.
================================================
PURPOSE
Problem Description
sqlplus 에서 mfg_lookups table을 select할때,
ORA-1722 Invalid number 에러발생
Workaround
Solution Description
=======================================================
CREATE OR REPLACE VIEW mfg_lookups(
lookup_type,
lookup_code,
meaning,
description,
enabled_flag,
start_date_active,
end_date_active,
created_by,
creation_date,
last_update_date,
last_updated_by,
last_update_login
AS
SELECT lv.lookup_type,
TO_NUMBER(lv.lookup_code) lookup_code, <==== Wrong code!!!
lv.meaning,
lv.description,
lv.enabled_flag,
lv.start_date_active,
lv.end_date_active,
lv.created_by,
lv.creation_date,
lv.last_update_date,
lv.last_updated_by,
lv.last_update_login
FROM fnd_lookup_values lv
WHERE lv.LANGUAGE = USERENV('LANG') AND
lv.view_application_id = 700 AND
lv.security_group_id =
fnd_global.lookup_security_group(lv.lookup_type,
lv.view_application_id)
=================================================================
MFG_LOOKUPS 은 view로 fnd_lookup_values의 lookup_code값을 가지고 오는
방식이나, to_number로 변환하게 되어 있어 숫자가 아닌 문자의 경우
이와 같은 에러를 발생한다.
이번 경우, 고객이 새로 등록한 Lookup code였고, code값을 숫자의 format으로
다시 등록하니 해결됨.
Reference Documents
-------------------Yes but this is a regular operation and the INSERT is the only opportunity.
BTW, look at what else I have just found:
INSERT INTO Local_Table (a, b)SELECT col1, col2 FROM DUAL INNER JOIN Table1@remote ON (1=1) LEFT JOIN Table2@remote ON (...)
OK. -
Error when inserting Web Dynpro script in Adobe form
Hi
In my WD component in one of the view I have an ADOBE form (Online scenario) and a button to save data into backend. In the ADOBE form everything is working properly, however the problem is when I click on the button to save, Its not getting into my action code. Even I am not getting any error other than the wait symbol.
In the form I have taken ZCI layout but when i'm inserting Webdynpro Script its showing an error 'Error when inserting Web Dynpro script'.
Please let me know why this error is getting.
Thanks
RamHi Ram,
I hope you help me,
I have the same error, when I insert a web Dynrp Script, what version of SAPGUI do you use?
Thanks -
Error ODS activation - sql error when accessing a table.
Hi,
sometimes occurs an error by activation ODS. I have proces chain and when is loaded second packet an error occurs. In monitor>>
-RSMPC 128, datapacket 3 is wrong, with status number 9
-RSMPC 131
-RSDRO 108 - communcation error (sql error when accessing a table)
In sm21>
-sql error when accessing a table
-The exception, which is assigned to the class 'CX_SY_OPEN_SQL_DB', was
either caught nor passed along using a RAISING clause, in the procedure <b>"UPDATE_ATAB"</b> "(FORM)"
Since the caller of the procedure could not have expected this exception
to occur, the running program was terminated.
The reason for the exception is:
The database system recognized that your last operation on the database
would have led to a deadlock.
Therefore, your transaction was rolled back
to avoid this.
ORACLE always terminates any transaction that would result in deadlock.
The other transactions involved in this potential deadlock
are not affected by the termination.
I have BW 3.5.
Thank You very much.There are a few different scenarios that I can think of where this might come up that all involve what might resulting in parallel (concurrent)processes:
Loading packets in parallel - that is there are X number of processes loading packets concurrently. This could be set in your IMG settings system wide or in the InfoPackage for just this datasource. You seem to indicate that you don't have this.
Database parallel processing - RSAMDIN - ORA_PARALLEL_DEGREE ( there was a different RSADMIN parm for older versions - forget what SP the change came with).
You have multiple InfoPackages for the datasource, each loading what should be a different range of data, and they run atthe same time.
You could be loading from two different datasources to the ODS at the same time.
If any of these are true, I would look at bumping the INITRANS setting up. Your DBA will probably need to do this for table and its indices. There is a Note - 831234 that allows you to create a parameter in RSADMIN that will specify a INITRANS value (e.g. 20) rather than using the default. The ODS would need to be activated to pick this new setting up for the table to be altered.
You could also look at the Processing settings for the InfoPackage and change to PSA first, then target to see if that helps.
Or if you are loading from two different datasources at the same time, you might adjust your schedule so that doesn't happen.
Pizzaman -
Internal error when accessing a table -
Hi,
The program which is running as background was running for last 1 year, last two days the RFC call in the program is dumping.
In DUMP its showing Internal error when accessing a table
Error : DBIF_RSQL_SQL_ERROR
I checed the size of the table its quite huge for the application.
So there is no issue with table.
Please advise what causes these sort of error.
System is ECC 6.0
With SQL server 8.0
Regards,
ThomasThese are the system log i got it from SM21. For this error logs are as below
Very High Priority error
Details Page 2 Line 9 System Log: Local Analysis of onsaprp1 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:43:09
DIA
009
300
AB
0
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Run-time error "DBIF_RSQL_INTERNAL_ERROR" occurred
Details
Recording at local and central time........................ 11.02.2011 15:43:09
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
1
SAPMSSY1
T
Transaction Problem
SABP
Further details for this message type
Module nam
Line
Error text
absapsql
0786
HandleRsqlErrors
Documentation for system log message AB 0 :
The specified runtime error has occurred in the system.
Parameter
abcdefghijklmnopqrstuvwxyz .. DBIF_RSQL_INTERNAL_ERROR
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
119
618840
l
Error (Module, Row)
AB
0
HandleRsqlErrors absapsql0786
High Priority error
Details Page 2 Line 18 System Log: Local Analysis of onsaprp1 1
Time
Type
Nr
Clt
TCode
Grp
N
Text
15:44:07
DIA
009
300
SMEN
BZ
Y
Unexpected return value 8 when calling up
Unexpected return value 8 when calling up
Details
Recording at local and central time........................ 11.02.2011 15:44:07
Task......
Process
User......
Terminal
Session
TCode
Program
Cl
Problem cl
Package
03084
Dialog work process No. 009
TOM
om-blr-l
1
SMEN
SAPLSMTR_NAVIGATION
K
SAP Web AS Problem
SBAC
Further details for this message type
Module nam
Line
Table Name
Field Name
dbrepolo
172
8
Documentation for system log message BZ Y :
When calling a function within the database interface, a return
value which cannot be processed by the calling function was
provided.
Technical details
File
Offset
RecFm
System log type
Grp
N
variable message data
120
11160
h
Database Error (Non-SQL)
BZ
Y
8 dbrepolo172
Edited by: Thomas Paul jr on Feb 14, 2011 6:36 AM
Edited by: Thomas Paul jr on Feb 14, 2011 6:38 AM -
SM58 : Internal error when accessing a table
Hi there,
We have just upgraded from R/3 4.7 to ECC 6.0. After the upgarde we face many "Internal error when accessing a table" in sm58. Is there any table mapping mismatched happened during unicode conversions? How to check the details? Most of the errors are SWW_WI_EXECUTE_INTERNAL_RFC, SWW_WI_CREATE_VIA_EVENT_IBF and etc which are workflow modules.
can you help?
Thanks.
Regards,
ThavaHi
Have u checked this thread?
problem in TRFC
Error while executing Workflow: User is locked.
/message/5804053#5804053 [original link is broken]
Regards
Sridhar Goli
Maybe you are looking for
-
URGENT FIX MY Connect Four game for Wednsday PLEASE HELP
I am using an APPLET and i want to use JOptionpane it didnt work when i used it in the paint method. So i want to make a runner to make the program work. I don't know why the Graphics g = new Graphics isnt working PLEASE HELP. Email the revised code
-
my iphone 5 from day one makes a rattling noise when you shake the device. the replacement i recieved also makes the similar rattling noise, apple calls it a "common problem" and says its the autofocus of the camera which makes the noise, but people
-
Hi All, I had posted this query on Planning forum but I just thought this might be the right forum to ask the following doubt. I am new to ODI and I am trying to get it working. I have got the Master repository configured by replacing the sqlJDBC.jar
-
How to use a cofigured JDBC iView?
Hello, I ghave configured an iView which implements a JDBC connection to my SQLServer, let's call it "myJDBC". Can someone please show me a simple code example (including relevant descriptors)of another iView which uses the JDBC iView in order to Que
-
AFP fails to initialize at 50%
I'm running Windows XP (SP3) - 32bit - and my browser is the latest version of Firefox. When I save the latest Flash Player update (11.7.700.202) and click to install it, I keep getting the same error message and then the file disappears. The only