Javascript to copy input fields to another input field..

Hi,
I have Permanent address fields(input text fields) (address line 1,2,city, state , country,zip code)  and present address fields with same input fields as premanent address
and i have a check box is present address different with value Y when checked and N when unchecked
so based on the check box checked and unchecked the permanent address should copy to present address.
i dont know how to use java script in adf
so some one  please help me to do this.
thanks in advance
cheers

Hi Suchith,
I will tell you how to achieve your case using the framework itself;
1.- Add to your checkbox a setPropertyListener for each field you want to copy. So for the first one addressLine1 I assume the component value resides in your binding layer, you do
from=#{bindings.yourCheckBox.inputValue eq 'Y' ? bindings.addressLine1.inputValue : null}
to=#{bindings.otherAddressLine1.inputValue}
type='valueChange'
And the same for each field. All in the checkbox component.
Since this is a business rule, you should always aim to write this kind of logic in the model layer so you can create a method in your ViewObjectRowImpl named copyAddress() and in there you copy the values from one field to another field. Then you expose this method in the client interface and execute it when clicking the checkbox. Add autosubmit=true and partialTrigger to the panel containing your other fields to be refreshed.
Once again I am making a lot of assumptions about your model, but that is why you always need to first state the version of your JDeveloper, then give a clue about your model and where are the fields being stored and so on. So people can help you better.
Regards

Similar Messages

  • How to compare and copy the fields from repeating subform to another subform, same structure.

    Dear All,
    I am using LiveCycle Designer 8.2.
    I have the following requirement, and did not figure out the best way to implement it using JavaScript.
    The Form has, say, Subform A with Repeating Inner Subform, say it has the Education History of the Staff.
    I want to put another Subform B, with similar structure to From A, and create a button/function to copy the field data values from A to B.
    Subform A will show the user the fields of education with Read-Only Mode.
    Subform B will show the user the same data values with write-enable mode. This subform will allow the user update his Education Records.
    The fields are:
    0. Staff ID: Text (Key 1) (always read-only and hidden, becuase it is on the main form),
    1. Degree: Text,
    2. Specialization: Text,
    3. Institution: Text,
    4. Start Date: Date (Key 2),
    5. End Date: Date.
    Another function is needed is to compare the same records between form A and Form B.
    (Note: The Education record of a Staff has primary key of Staff ID and Start Date. Meaning, the Staff cannot have tow different degrees in starting on the same date.)
    The user may change the Institution in form B or change the Degree. I need to highlight, on Subform B, the row which was changed or added by the user. This means I need to do lookup against Subform B using the Key Values from Subform A.
    I have already developed the Form, and I have about 5 Subforms to allow updated by Staff: Education, Experience Inside the company, Experience Outside the company, Job Skills, Membership Record, ..etc. One thing I did is that the Field Names I used in Subform A are not the same of the fieldname in Subform B, but the have same suffix, and different prefix. For example, for the Education:
    Subform A - Original Values:
    1. Degree: OrgDegreet,
    2. Specialization: OrgSpecialization,
    3. Institution: OrgInistitution,
    4. Start Date: OrgDateStart (Key),
    5. End Date: OrgDateEnd.
    Subform B - Updated Values:
    1. Degree: UpdDegreet,
    2. Specialization: UpdSpecialization,
    3. Institution: UpdInistitution,
    4. Start Date: UpdDateStart (Key),
    5. End Date: UpdDateEnd.
    I understand if the Key field is updated, then it is like it was deleted, and added a new one.
    I know how to do that in ASP.NET, but need help in Adobe LiveCycle using JavaScript.
    Please help me to write these two functions, as they are very urgent requirement.
    Tarek.

    In the event Exit of the 1st subforum.invoice you will find the code to assign the value to it's "brother" on page4.
    Also, on the add button i added the code to add a record to the page4 subforum.
    To make this work you will have to copy/past the code of the exit event to all fields you want to copy and in the xfa.resolvenode("XXXXXXX[].fieldName") command replace fieldname with the actual name of the field you're at.
    I didnt't do anything to te remove line button because i don't know how you want it to work, but, if you want to control the p4 subform with the p1 subform, you shouldn't allow for lines to be removed directly in the p4 subform.
    Hope this helps.

  • What is the JavaScript to copy the value from a field to the clipboard?

    I have a "Save As" Button scripted. But would like the button to first copy the value "SiteCode" so when the user is prompted to enter in the name they can just paste it.
    Anybody got any ideas?
    Thanks

    That's not possible. It is possible to save to an existing folder with a filename derived from one of more field values, but the code that does that save has to be in a folder-level JavaScript file or in a certified document that the user chooses to trust for privileged JavaScript execution. So each user would have to manually install the JavaScript file or manually add the certificate to their list of trusted certificates and specify that it's trusted for privileged JavaScript execution.
    I've had good success providing instructions for copying the field name from a form field so that the user can paste it as the field name in the Save As dialog that's invoked using an "Execute a menu item" action (File > Save As), so this might be a viable alternative you can use.

  • FW: (forte-users) Copy Input parameter

    Peter,
    That is the behaviour that I have experienced also, so I do not have such
    (anchored service object) attributes in my classes anymore but instead add
    that service object attribute as an input parameter to all methods in that
    class that require access via that service object attribute.
    Alternatively, if access to that anchored service object is only required
    in the partition that it was created then overriding the Clone method of
    the class to return a NIL value in the service object attribute should
    work for you.
    Mario Emmi
    British Aerospace Australia
    -----Original Message-----
    From: Peter Sham [SMTP:[email protected]]
    Sent: Thursday, 28 October 1999 05:33
    To: Forte User Group
    Subject: (forte-users) Copy Input parameter
    Hi folks,
    I have this problem where a "copy input" seems to copy
    the service object too.
    The case is that I have a service object, say
    batchmgrso, for batch processing and an object, say
    batchproc, as the process. The batchproc has an
    attribute for referencing the batchmgrso as it will
    create some other process and submit it to the
    batchmgrso.
    The problem is whenever a batchproc fails and the
    batchmgrso tries to re-submit the object from the
    queue, and I use a copy input as the mechanism for
    passing in the batchproc to the service object, I can
    find that not only does the batchproc get cloned, but
    also the batchmgrso. It caused a lot of problem and
    bombed the method.
    When I changes the mechanism to just input in the
    method signature, everything works fine.
    So is it a forte feature/bug that a copy input would
    clone something so "deeply" that even a SO or archored
    object would get clone too. Is there any way to avoid
    it?
    Regards,
    Peter Sham.
    =====
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

    Peter,
    That is the behaviour that I have experienced also, so I do not have such
    (anchored service object) attributes in my classes anymore but instead add
    that service object attribute as an input parameter to all methods in that
    class that require access via that service object attribute.
    Alternatively, if access to that anchored service object is only required
    in the partition that it was created then overriding the Clone method of
    the class to return a NIL value in the service object attribute should
    work for you.
    Mario Emmi
    British Aerospace Australia
    -----Original Message-----
    From: Peter Sham [SMTP:[email protected]]
    Sent: Thursday, 28 October 1999 05:33
    To: Forte User Group
    Subject: (forte-users) Copy Input parameter
    Hi folks,
    I have this problem where a "copy input" seems to copy
    the service object too.
    The case is that I have a service object, say
    batchmgrso, for batch processing and an object, say
    batchproc, as the process. The batchproc has an
    attribute for referencing the batchmgrso as it will
    create some other process and submit it to the
    batchmgrso.
    The problem is whenever a batchproc fails and the
    batchmgrso tries to re-submit the object from the
    queue, and I use a copy input as the mechanism for
    passing in the batchproc to the service object, I can
    find that not only does the batchproc get cloned, but
    also the batchmgrso. It caused a lot of problem and
    bombed the method.
    When I changes the mechanism to just input in the
    method signature, everything works fine.
    So is it a forte feature/bug that a copy input would
    clone something so "deeply" that even a SO or archored
    object would get clone too. Is there any way to avoid
    it?
    Regards,
    Peter Sham.
    =====
    For the archives, go to: http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. To unsubscribe, send in a new
    email the word: 'Unsubscribe' to: [email protected]

  • RE: (forte-users) Copy Input parameter

    Peter,
    Just a quick response before I prepare a code sample for you.
    Unfortunately, we pay for our sins as a true cloning operation has to take
    into account the (potentially) recursive nature of an object graph and
    effectively has to do the equivalent of serialising an object graph (as in
    parameter passing to remote methods) without going into an infinite loop
    when the object graph recurses back into itself.
    The Forte runtime does this quite nicely but if you wish to change its
    default behaviour, it's a bit of hard work but it's achievable.
    So you need to decide. Is it worth it?
    Mario Emmi
    British Aerospace Australia
    -----Original Message-----
    From: Peter Sham [SMTP:[email protected]]
    Sent: Thursday, 28 October 1999 07:20
    To: EMMI, Mario
    Cc: '[email protected]'
    Subject: RE: (forte-users) Copy Input parameter
    Hi,
    Interesting solution!
    Just to clarify further. How exactly would you
    over-write the clone method. New the object and then
    clone all the attributes of the existing object to the
    new object, excluding whatever attribute you think is
    appropriate?
    Regards,
    Peter Sham.
    --- "EMMI, Mario" <[email protected]> wrote:
    Peter,
    That is the behaviour that I have experienced also,
    so I do not have such
    (anchored service object) attributes in my classes
    anymore but instead add
    that service object attribute as an input parameter
    to all methods in that
    class that require access via that service object
    attribute.
    Alternatively, if access to that anchored service
    object is only required in
    the partition that it was created then overriding
    the Clone method of the
    class to return a NIL value in the service object
    attribute should work for
    you.
    Mario Emmi
    British Aerospace Australia
    -----Original Message-----
    From: Peter Sham [SMTP:[email protected]]
    Sent: Thursday, 28 October 1999 05:33
    To: Forte User Group
    Subject: (forte-users) Copy Input parameter
    Hi folks,
    I have this problem where a "copy input" seems tocopy
    the service object too.
    The case is that I have a service object, say
    batchmgrso, for batch processing and an object,say
    batchproc, as the process. The batchproc has an
    attribute for referencing the batchmgrso as itwill
    create some other process and submit it to the
    batchmgrso.
    The problem is whenever a batchproc fails and the
    batchmgrso tries to re-submit the object from the
    queue, and I use a copy input as the mechanism for
    passing in the batchproc to the service object, Ican
    find that not only does the batchproc get cloned,but
    also the batchmgrso. It caused a lot of problemand
    bombed the method.
    When I changes the mechanism to just input in the
    method signature, everything works fine.
    So is it a forte feature/bug that a copy inputwould
    clone something so "deeply" that even a SO orarchored
    object would get clone too. Is there any way toavoid
    it?
    Regards,
    Peter Sham.
    =====
    For the archives, go to:
    http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. Tounsubscribe, send in a new
    email the word: 'Unsubscribe' to:
    [email protected]
    =====
    Do You Yahoo!?
    Bid and sell for free at http://auctions.yahoo.com

    Mario,
    Well. There're 2 ways that I can do it. Avoid copy
    input as much as possible ( in fact, I hate copy input
    ) or code my own clone method.
    Coding my own clone method should be a better
    solution. So if you have time, please please descibe
    it.
    Thanks for all the troubles. Regards,
    Peter Sham.
    --- "EMMI, Mario" <[email protected]> wrote:
    Peter,
    Just a quick response before I prepare a code sample
    for you.
    Unfortunately, we pay for our sins as a true cloning
    operation has to take
    into account the (potentially) recursive nature of
    an object graph and
    effectively has to do the equivalent of serialising
    an object graph (as in
    parameter passing to remote methods) without going
    into an infinite loop
    when the object graph recurses back into itself.
    The Forte runtime does this quite nicely but if you
    wish to change its
    default behaviour, it's a bit of hard work but it's
    achievable.
    So you need to decide. Is it worth it?
    Mario Emmi
    British Aerospace Australia
    -----Original Message-----
    From: Peter Sham [SMTP:[email protected]]
    Sent: Thursday, 28 October 1999 07:20
    To: EMMI, Mario
    Cc: '[email protected]'
    Subject: RE: (forte-users) Copy Input parameter
    Hi,
    Interesting solution!
    Just to clarify further. How exactly would you
    over-write the clone method. New the object andthen
    clone all the attributes of the existing object tothe
    new object, excluding whatever attribute you thinkis
    appropriate?
    Regards,
    Peter Sham.
    --- "EMMI, Mario" <[email protected]> wrote:
    Peter,
    That is the behaviour that I have experienced
    also,
    so I do not have such
    (anchored service object) attributes in myclasses
    anymore but instead add
    that service object attribute as an inputparameter
    to all methods in that
    class that require access via that serviceobject
    attribute.
    Alternatively, if access to that anchoredservice
    object is only required in
    the partition that it was created thenoverriding
    the Clone method of the
    class to return a NIL value in the serviceobject
    attribute should work for
    you.
    Mario Emmi
    British Aerospace Australia
    -----Original Message-----
    From: Peter Sham [SMTP:[email protected]]
    Sent: Thursday, 28 October 1999 05:33
    To: Forte User Group
    Subject: (forte-users) Copy Input parameter
    Hi folks,
    I have this problem where a "copy input" seems
    to
    copy
    the service object too.
    The case is that I have a service object, say
    batchmgrso, for batch processing and an
    object,
    say
    batchproc, as the process. The batchproc has
    an
    attribute for referencing the batchmgrso as itwill
    create some other process and submit it to the
    batchmgrso.
    The problem is whenever a batchproc fails and
    the
    batchmgrso tries to re-submit the object fromthe
    queue, and I use a copy input as the mechanismfor
    passing in the batchproc to the serviceobject, I
    can
    find that not only does the batchproc get
    cloned,
    but
    also the batchmgrso. It caused a lot of
    problem
    and
    bombed the method.
    When I changes the mechanism to just input in
    the
    method signature, everything works fine.
    So is it a forte feature/bug that a copy inputwould
    clone something so "deeply" that even a SO orarchored
    object would get clone too. Is there any way
    to
    avoid
    it?
    Regards,
    Peter Sham.
    =====
    For the archives, go to:
    http://lists.sageit.com/forte-users and use
    the login: forte and the password: archive. Tounsubscribe, send in a new
    email the word: 'Unsubscribe' to:
    [email protected]
    =====
    =====

  • Copy Input parameter

    Hi folks,
    I have this problem where a "copy input" seems to copy
    the service object too.
    The case is that I have a service object, say
    batchmgrso, for batch processing and an object, say
    batchproc, as the process. The batchproc has an
    attribute for referencing the batchmgrso as it will
    create some other process and submit it to the
    batchmgrso.
    The problem is whenever a batchproc fails and the
    batchmgrso tries to re-submit the object from the
    queue, and I use a copy input as the mechanism for
    passing in the batchproc to the service object, I can
    find that not only does the batchproc get cloned, but
    also the batchmgrso. It caused a lot of problem and
    bombed the method.
    When I changes the mechanism to just input in the
    method signature, everything works fine.
    So is it a forte feature/bug that a copy input would
    clone something so "deeply" that even a SO or archored
    object would get clone too. Is there any way to avoid
    it?
    Regards,
    Peter Sham.
    =====

    Hi folks,
    I have this problem where a "copy input" seems to copy
    the service object too.
    The case is that I have a service object, say
    batchmgrso, for batch processing and an object, say
    batchproc, as the process. The batchproc has an
    attribute for referencing the batchmgrso as it will
    create some other process and submit it to the
    batchmgrso.
    The problem is whenever a batchproc fails and the
    batchmgrso tries to re-submit the object from the
    queue, and I use a copy input as the mechanism for
    passing in the batchproc to the service object, I can
    find that not only does the batchproc get cloned, but
    also the batchmgrso. It caused a lot of problem and
    bombed the method.
    When I changes the mechanism to just input in the
    method signature, everything works fine.
    So is it a forte feature/bug that a copy input would
    clone something so "deeply" that even a SO or archored
    object would get clone too. Is there any way to avoid
    it?
    Regards,
    Peter Sham.
    =====

  • Copy UDF fields from one user to another user with similar authorizations.

    Hi,
    Is there a way to copy UDF fields viewable to one user to another user wihtout manually checking the boxes in Form Manage User Fields?
    if so how can it be done?
    Jyoti

    For copying Form settings, user field settings, read the following 2 threads for complete details
    Replicate User Defined Field settings
    Form Settings

  • Error while copying Z program to another enviroment

    Hi, experts
    I have a Z program into one client's enviroment, which works fine. I tried copying this program into another client's enviroment, and i get the following error message, while syntax check:
    "RC_IN1 must be a byte-type field. (Typ X or XSTRING)."
    And this error is on the following form:
    form xor using rc_in1 type c rc_in2 type c rc_out type c.
      data:
        li_abit type i,
        li_bbit type i.
      rc_out = space.
      if rc_in1 <> space.
        do 8 times.
          get bit sy-index of rc_in1 into li_abit.
          get bit sy-index of rc_in2 into li_bbit.
          if li_abit <> li_bbit.
            set bit sy-index of rc_out to 1.
          else.
            set bit sy-index of rc_out to 0.
          endif.
        enddo.
        if rc_out = space.
          rc_out = rc_in1.
        endif.
      endif.
    endform.
    When I check into one client's enviroment, it does not gives error. Only in THAT client.
    Why is this happening?
    Thanks in advance,
    Brian Gonsales

    Hi,
    are the both client environments hav same version (ECC 6).
    In ECC 6 version type X is not allowed.
    To avoid this problem,
    you need to declare the field of TYPE C.
    you need to get the value from Cl_ABAP_CHAR_UTILITIES.
    Regards
    Sandeep Reddy

  • I am unable to copy fillable fields from a pdf form into Microsoft Word or notepad....Help! thank you!

    I am unable to copy fillable fields from a pdf form I created in Adobe X Pro into a Microsoft Word or Notepad document. Please help! Thank you!!

    I have created a fillable form. Part of the information from that form needs to be copied and sent to another department at work. Once i complete the fillable form (e.g. select options from a drop down, enter test in test boxes that are on the form) when i copy that section, i only get the non-fillable information pasted into word or notepad, the drop down selections and fillable text do not copy.

  • How to copy report properties into another report?

    I have created one updated list report and I wanted to create another updated list report with same report properties of first one but with different data objects so I don't have to redo properties settings.
    I copied first report to another name and I tried to change data objects but It didn't allow me to choose different data object. It says "Data object must contain at least the same fields as in the Original Data object".
    Do I have to create another report from scratch?

    You could edit the report xml.

  • Javascript to fill text field from other PDF form

    I am trying to figure out if it is possible to add javascript to a text field that when initiated pulls text from another field in a closed pdf in the same directory.
    For example I have a NAME field in the pdf form I am working in....
    When I initiate the script the NAME field is filled in with the same data from another PDF that is closed.

    I have looked up the 'disclosed' property and it looks like that is what I want to do..
    I have "this.disclosed = true" in a PDF with the name field. On the other PDF that I want the information replicated I am going to add a javascript to an action somewhere on the document, my problem is which script do I use to get this data from the other pdf?  Is the pdf that is now accessible via javascript (disclosed) a data object?

  • Copy DocumentLines object to another DocumentLienes

    Hi
    Is it possible to copy one documentline to another documetnLine object using DIAPI.
    Thx

    Hi,
    yes. In the Businessobject you have Document_Lines.
    You should get the source Document_Lines-Fields of your source Businessobject and write it to the destination Document_Lines-Fields of your destination Businessobject.
    This can be done via the Document-objects fields or via XML.
    Regards,
    Holger

  • How to copy one schema into another

    I need to copy one schema into another. That means, all the tables, views, constraints, etc, and all the data as well.
    I have a dmp file of source-schema (created daily with expdp by our backup schedule).
    Can I use impdp to import this dmp file into dest-schema? I'm thinking about something like this:
    The dmp file was created with:
    expdp source-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    Create the copy on dest-schema with:
    impdp dest-schema/pwd DIRECTORY=dmpdir DUMPFILE=myproject.dmp
    (dest-schema is an existing schema on the same machine. I'll drop all the tables before executing the command. Is there anything else I should do first?)
    If this approach is not feasible, kindly suggest me an alternative.
    Thank you.
    Edited by: mgro on Apr 16, 2010 3:22 AM (changed 2nd command: expdp to impdp)

    Thank you both. Dean, I've made a note of your proposed command. May use it next time.
    In the end I used the following command and it worked for me. I added TABLE_EXISTS_ACTION=REPLACE since the destination was not empty.
    First I ran these command logged in as SYS
    GRANT Import Full Database TO dest-schema;
    GRANT Create Any Directory TO dest-schema;
    GRANT Unlimited Tablespace TO dest-schema;
    impdp
    dest-schema/pwd
    DIRECTORY=dmpdir
    DUMPFILE=myproject.dmp
    REMAP_SCHEMA=source-schema:dest-schema
    TABLE_EXISTS_ACTION=REPLACE
    LOGFILE=implog.log
    There were some errors though. The import process complained about constraints referencing non-existent primary keys.
    It turns out that the source schema has some constraints that are marked with status DISABLED. These constraints either:
    - are not part of the DUMP file
    or
    - are in the DUMP file but skipped during import
    Don't know if this is a bug or by design behavior.

  • PDF Form javascript for making readonly field by using button

    Please let me know the PDF Form JavaScript for making selected fields(Text field,Drop down list,..) as read-only by using Button.

    Do you want your button to be made read only?
    One starts with Acrobat JS Reference.
    // make all fields in a form read only;
    var oField; // variable for field being processed;
    // loop through the form fields;
    for (var i = 0; i < this.numFields; i++) {
    // process each field name;
    oField = this.getField(this.getNthFieldName(i)).readonly = true;

  • HT1727 My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again.

    My old computer died on me with no warning signs. I didn't know or need to copy my music to another computer. I would like to know how to get the music that I bought onto my new computer without having to buy it all again. I just want to be able to get all of my music that I bought on itunes onto my computer. Right now the money ive spent is just gone and I have no music to show for it.

    Go to the iTunes Store and select "Purchased" from the Quick Links side bar on the right. Go through all the tabs to download again for free

Maybe you are looking for

  • HP 7600 AIO Leopard update

    I recently found the new release of HP 7600 software for Leopard. After some trouble, I was able to install it (apparently) successfully for our HP Officejet Pro L7650 (which apparently is the Costco version of the L7680). I have a LAN based on an Ai

  • 8.0.2.20 won't load.."iTunes has encountered a problem and needs to close."

    I finally gave in to the annoying pop-up and upgraded to 8.0.2.20 from 7.6. Initial load worked fine, connected to ipod and updated it without a problem. Shutdown computer and tried to load this morning. Now get the "iTunes has encountered a problem

  • Need help in selecting translations for bursting

    Hi, I am using EBS 12.1.3 (XML publisher 5.6.3) .I am successfully able to burst my consolidated report to e-mail in english language. But somehow I cannot get it to select the french translation ,for which I have already uploaded the corresponding x

  • Generate URL in PDF made with Smartforms

    Hallo, i wanted Generate URL in PDF made with Smartforms, i have done everything necessary with cuastmizing and programing, the PDF ist working good, but afer clicking on the link in my PDF , it doesnt work, and with debbaging , the FM HR_RCF_SF_URL_

  • Nokia 301 RM-839 v9.04 hanging issue.

    Hello, I have observed hanging issue while we take photo using camera. Instead of saving & showing options it show image taken preview. Keyboard also hangs. Only way is to stop camera or restart removing battery. Has anyone seen such issue? Any clue?