Jaxb Integer and Boolean types not initialized

I just converted from using JWSDP 1.6 to 2.0. I noticed that when I used Jaxb to generate my beans the default types for int and boolean are now the wrapper classes Integer and Boolean. With version 1.6 I did not initialize my ints or booleans. Now with version 2.0 I find I have null issues because the fields that have the types Boolean and Integer are not initialized.
I would like to change how Jaxb generates the beans so that one of the two options listed below will occur:
1) The field types that need integers and booleans would be primitive types instead of the wrapper classes.
or
2) I would like to change the declaration from:
protected Boolean someboolean;
protected Integer someinteger;
to:
protected Boolean someboolean=new Boolean(true);
protected Integer someinteger = new Integer(0);
How can I do this?
Message was edited by:
[email protected]
Message was edited by:
[email protected]

I found the answer: The problem was that I had used the attribute minOccurs="0". This caused the code generator to make the types either Boolean or Integer. I removed the attribute minOccurs="0" then the system generated the fields with the primatives int and boolean. Now my fields are initialized.

Similar Messages

  • Send cost centre and attendence type not filled automatically

    Hello,
    I am configuring the time recording in ESS. I configured the recording profile and in cats2 it looks good. The send cost centre and attendence type get filled automatically. But when I do the same thing in ESS the values are not populated. Is there something I have to take into account in order to get this done?
    Thanks a lot, Vanessa

    Dear Venessa,
    Please note that in contrast to personal templates, which enable you to prefill the data entry area when you start time recording, the system first displays default values when you create a new account assignment row with one receiver object and at least one working time.The system only proposes default values when you create a new account assignment row. In ESS, this is correct, because it does not make sense to provide default values for the sender cost center and activity type if you are only entering an attendance or absence type.
    Hope this helps,
    Regards,
    Roy

  • .htaccess and MIME types not working in 3.1

    anyone else noticed that when using a .htaccess file to determine certain mime types safari 3 ignores the .htaccess file and handles the file the way the OS would normally?
    i'm hosting a bunch of 1080p .mov's and I'd prefer if they would just download when clicked on instead of trying to open in a window where they go out of frame.
    i've currently got the addtype set to octetstream, and on safari 2 and firefox they both automatically start to download, but safari 3 tries to open the movie in the browser window.

    I think that it is interesting to note that as I peruse the various threads dealing with 3.1 update problems the majority of complaints seem to be coming from iPhone/Mac combos; based, at least, on the posters signiture.
    For my part, 64bit vista win machine and 3Gs, the update could not have been soother and the phone works better then it did; no app problems, better wi-fi conectivity, faster loading of apps and files.
    I have had, though, considerable problems with Outlook sync, contacts sync and MM sync (enough so that I turned off MM except for iDisk); but most of these are known issues so just need to with it out.
    Seems like Apple could have workedd this stuff out before hand, though.

  • Idoc and message type not getting replicated in the receiver system

    Hi
    i have created a Z Idoc and didtributed the mode from system A ....I can see the distribution model in system B
    However i cannot see the custom zidoc / message type in sys B.. Do i need to create the zidoc again in sys B

    Hi Tarang,
    at least ou need the required partner agreements and you should have a processing function for inbound IDoc. To implement this, the full definition of IDoc including Segment definition should be present in receiving system.
    Just look at standard IDocs and do as they do.
    Regards,
    Clemens

  • Identify Point Type and Area Type, not just Type

    Ai tells you what you have selected in the Control Panel and in the Appearance Panel.
    But when you select any text, it just says "Type".
    It would be nice if it instead said "Point Type" or "Area Type".
    I often have to play with type I've selected to see what kind it is because I've forgotten or whatever.
    I may want to scale the type up but there's 2 different approaches and it depends on which kind of type you've got.
    It would be really hand to have Ai just tell you when you select some type.

    You can see if there are in
    ports and out ports in the selected text, if it exists then it is area type otherwise it is a point type object.  In port \ out port is the small rectangle along the bounding box at the top left and bottom right corner of the selected text object.

  • Sun Sudio C++: Local Variables and Watches Values Not Initialized in Debug

    Hi All,
    I am trying to debug my program (using dbx). I have put break points in various functions. However, I have the following problems:
    - when the program runs to the break points, all arguments have in the functions shown in the callstack have values '???';
    - NOTHING is shown in the 'Local Variables' windows;
    - if I put the local variables in the 'Watches' window, the 'value' simply says <unset value>;
    what am I doing wrong?
    Thanks in advance

    Well, first things that comes to my mind is that your app was not compiled with debug info. Could you please post output of the following three commands here:
    $ dwarfdump -l <your app> | wc -l
    $ dumpstabs -s <your app> | wc -l
    $ file <your app>
    (if the first two would print small number, remove "wc -l" and post real output here, please)

  • LSO- Course Groups and Course Types are not displayed in Spanish

    We are having issues with the
    data like Course Groups and Course Types not being displayed in
    Spanish on the Learning Iview.
    The Data in the Course Catalog is loaded in Spanish and
    English and I can see the Course Catalog in Spanish when logging on in Spanish in the back end.
    SAP asked us to apply few notes as below
    #1247020 OTR: Texts are not transported
    #448220 OTR: Text is not determined/incorrect text is displayed
    We have applied the above as well and we had no solution.
    However the Problem is NOT related to Texts/Labels as these are displayed in Spanish.
    The Problem is related to the data like Course Groups and Course types not being displayed in Spanish in the front end.
    SAP also came up with the below which did not help either.
    The system will pick the language texts in the sequence
    maintained in the view T778L. If the system does not find text in
    login langauge , the application will search in the sequence
    maintained in the view T778L .Therefore you can change the sequence
    of the languages in the above view as per your requirement.
    Let me know if anyone has a solution to this or has encountered the same problem.

    Is this production or is this in a development system? The dropdown displayed comes from the standard tables. If it's working in development system and not in production, then the chances are higher that the translation didn't go through.

  • What's the difference between a not-initialed object and a null object

    hi guys, i wanna know the difference between a not-initialed object and a null object.
    for eg.
    Car c1;
    Car c2 = null;after the 2 lines , 2 Car obj-referance have been created, but no Car obj.
    1.so c2 is not refering to any object, so where do we put the null?in the heap?
    2.as no c2 is not refering to any object, what's the difference between c2 and c1?
    3.and where we store the difference-information?in the heap?

    For local variables you can't have "Car c1;" the compiler will complain.That's not true. It will only complain if you try to use it without initializing it.
    You can have (never used, so compiler doesn't care):
    public void doSomething()
       Car c1;
       System.out.println("Hello");
    }or you can have (definitely initialized, so doesn't have to be initialized where declared):
    public void doSomething(boolean goldClubMember)
       Car c1;
       if (goldClubMember)
           c1 = new Car("Lexus");
       else
           c1 = new Car("Kia");
       System.out.println("You can rent a " + c1.getMake());
    }

  • Dynamically Find out the Integer and Decimal Data Type of a Column

    Table: test (INTE number, DECI number(7,2))
    Try to dynamically determine the column type.
    Using select data_type from user_tab_columns. It only returns NUMBER which does not indicate if the column is an integer or decimal data type.
    Is there a way to dynamically determine if a column is integer or decimal type?
    Thanks

    First of all your column INTE stores not just integers but any franctional numbers too:
    SQL> create table test(INTE number, DECI number(7,2))
      2  /
    Table created.
    SQL> insert
      2    into test
      3    values(
      4           10.99,
      5           10.99
      6          )
      7  /
    1 row created.
    SQL> select  *
      2    from  test
      3  /
          INTE       DECI
         10.99      10.99
    SQL>If you want to declare column as integer you use either NUMBER(n) or INTEGER. And, as others already pointed out, you can check DATA_PRECISION & DATA_SCALE in data dictionary view USER/ALL/DBA_TAB_COLUMNS.
    SY.

  • Are Vector Integer and Vector String different types?

    Maybe I am missing something.
    Are Vector <String> and Vector <Integer> different types? Can I have to methods of the same name with arguments of these types? That would be the point of method overloading.
    Appearently not. The following code does not compile:
    import java.util.*;
    public class b {
            public static void doit(Vector <String> what) {
                    what.add(new String(""));
            public static void doit(Vector <Integer> what) {
                    what.add(new Integer(0));
    }$ javac -target 1.5 -source 1.5 b.java
    b.java:3: name clash: doit(java.util.Vector<java.lang.String>) and doit(java.util.Vector<java.lang.Integer>) have the same erasure
    public static void doit(Vector <String> what) {
    ^
    b.java:6: name clash: doit(java.util.Vector<java.lang.Integer>) and doit(java.util.Vector<java.lang.String>) have the same erasure
    public static void doit(Vector <Integer> what) {
    ^
    2 errors

    So it is not possible to have both methods in a class. Let us do instanceof instead.
    import java.util.*;
    public class b {
            public static void doit(Vector what) {
                            if (what instanceof Vector<String>) {
                                   what.add(new String(""));
                            else if (what instanceof Vector<Integer>) {
                                   what.add(new Integer(0));
    }javac -target 1.5 -source 1.5 b.java
    b.java:4: illegal generic type for instanceof
    if (what instanceof Vector<String>) {
    ^
    b.java:7: illegal generic type for instanceof
    else if (what instanceof Vector<Integer>) {

  • Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Hi all, I upgraded my MBP to Lion , but on the screen where i need to type my password, click  on my photo and it does not appear the place for me to type my password and it stay stuck there. Can anyone solve this problem for me?

    Reboot the machine holding Command and r keys down, you'll boot into Lion Recovery Partition
    In there will be Disk Utility, use that to select your Lion OS X Partition and Repair Permissions.
    After that is done reboot the machine and see if you can log in.
    If not repeat the above steps to get into Lion Recovery, get online and reinstall Lion again, it will overwrite the installed version and hopefully after that it wil work.
    Reboot and try again.
    If not follow my steps to create a Snow Leopard Data Recovery drive, then option boot from it and grab a copy of your files off the machine.
    Then reinstall all your programs onto the external drive like setting up a new machine, then use Disk Utility to erase the entire internal boot drive (select the drive media on the far left, not the partiton slightly indented) format Option: GUID , 1 partition OS X Extended and then use Carbon Copy Cloner to clone the external to the newly formatted internal drive. Once that is finished reboot and disconnect the external drive.
    Once you go that, boot into Snow Leopard and update to 10.6.8, use the AppStore and option click on Purchases and download Lion again and install.
    Lots of work, but there is no Lion disks.
    https://discussions.apple.com/message/16276201#16276201

  • I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    I need a new power cord for my Mac book Pro its the T type mag connector. I don't need a Tech just a new cord. How do I buy one. The closest Aplle store is 75 miles away and I do not drive.

    Are you in the US? Order one from here:  http://store.apple.com/us/browse/home/shop_mac/mac_accessories/power?mco=MTM3NjU xNDg
    Or check out Best Buy.

  • Abap report103 movement type is done and 105 is NOT done.

    HI,
    Requirement need materials for which 103 movement type is done and 105 is NOT done.
    Scenario: - Material comes in company means we do movement 103 for that. after that we do movt. type 105 for that material. I want those material document list that had 103 but not 105.
    Means material has enters in company but movt. type 105 not done.
    Please advice am abap fresher
    Regards..
    R.Sudhakar

    Is possible Query in sap to get this only 105 not release report ?
    ANS:
    Quary table MSEG,
    Check the table content with BWART = 105
    Get the EBELN Nos.
    Pass the EBELN into EKKO Table, Get the value of Field FRGKE.
    if FRGKE <> 'G'.
    ie. Document not yet released.

  • Initial Stock Upload T code MB1C and Movement Type 561through LSMW - Error

    Hi,
    Trying to Upload the Initial Stock, Transaction Code MB1C and Movement Type 561 through LSMW.
    While recording the fileds, system giving a message of Code Block.
    Please let us know about Code Block while uploading the Initial Stock.
    Thanks
    Siddu.

    Check this thread
    [Re: Coding Block in LSMW recording via MB1C|Coding Block in LSMW recording via MB1C;
    thanks
    G. Lakshmipathi

  • No Aapter registered for the channel and not initialized

    Hi Guys,
      I am working on Mail 2 File scenario. when the scenario is executed i am getting the  below error in sender MAIL adapter communication channel.
    No adapter registerd for the channel & not initialized
    Thnx,
    Siva

    Hi,
    Depending on your XI/PI version, apply one of the notes below to correct import the ESR content:
    PI 7.1X:
    #1152640 - SAP NetWeaver 7.1 including EHP 1: Importing ESR content
    XI 7.0:
    #836200 - SAP NetWeaver 7.0: Importing Process Integration Content
    XI 3.0:
    #705541 - XI 3.0 (SP1 and higher): Importing XI Content
    Also, check if the service for the adapters are running. Restart the J2EE Engine.
    If not solved, you may try redeploying the adapter's driver.
    Regards,
    Caio Cagnani

Maybe you are looking for