JAXB Unmarshall Validation Error Handling

Hello,
During unmarshalling, if say a required element is missing, a ValidationEvent is created and passed to the handleEvent(ValidationEvent e) method of a custom class implementing the ValidationEventHandler interface.
From the ValidationEvent, one can get the ValidationEventLocator, which allows you to find out the column and row numbers of where the validation failed in the XML file.
The problem is, this XML file that is being unmarshalled/marshalled is hidden from the user and not allowed to be accessed directly. I would like to tell the user where the validation failed by referencing nodes instead of column/line numbers.
For example, if an element called 'foo' requires one child 'bar', and if 'bar' is discovered as missing during unmarshalling, the message that comes with the ValidationEvent will say:
uncompleted content model. expecting: <bar>
I don't see a way to find out exactly where in the entire XML file that 'bar' is supposed to occure. How do I find out that the 'bar' element is expected to be under 'foo' element?
Using the Eclipse debugger, I can see that the parent 'foo' is referenced somewhere deep within the JAXB impl classes, but I don't see any public methods that will allow me to get it.
Any ideas?
Thanks,
AJ

Try 'ValidationEventLocation.getObject()', and see if you can narrow it down from there.
I'm also looking for a better solution, since I have a case where a child element is violating it's pattern restrictions, but all I get is a reference to the parent, with no apparent indication as to which child is at fault.

Similar Messages

Can SOA 11g fault policy handle XSD Validation errors from the Mediator?

I would like all errors in my SOA process to go through the fault-policies.xml. But I don't seem to be able to catch any mediator error caused by an XSD validation failure. A sample of the sort of error I am trying to 'catch' is:
Nonrecoverable System Fault          oracle.tip.mediator.infra.exception.MediatorException: ORAMED-01303:[Payload default schema validation error]XSD schema validation fails with error Invalid text 'A' in element: 'TermCode'Possible Fix:Fix payload and resubmit.
My fault-policies.xml file is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<faultPolicies xmlns="http://schemas.oracle.com/bpel/faultpolicy">
<faultPolicy version="2.0.1"
     id="NewStudentRegistrationFaults"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults" name="medns:1303">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
<faultName xmlns:rjm="http://schemas.oracle.com/sca/rejectedmessages" name="rjm:GetNewStudentRegistrationFile">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults" name="medns:TYPE_ALL">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:mediatorException">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:bindingFault">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
<faultName xmlns:bpelx="http://schemas.oracle.com/bpel/extension" name="bpelx:remoteFault">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="java-fault-handler">
<javaAction className="edu.villanova.soa.handlers.FaultNotificationHandler"
defaultAction="ora-human-intervention" propertySet="faultNotificationProps">
<returnValue value="OK" ref="ora-human-intervention"/>
</javaAction>
</Action>

<Action id="ora-human-intervention">
<humanIntervention/>
</Action>

<Action id="ora-terminate">
<abort/>
</Action>
</Actions>

<Properties>

<propertySet name="faultNotificationProps">
<property name="from">[email protected]</property>
<property name="to">[email protected]</property>
<property name="subject">Reporting a SOA fault</property>
</propertySet>
</Properties>
</faultPolicy>
<faultPolicy version="2.0.1"
     id="MediatorFaults"
xmlns:env="http://schemas.xmlsoap.org/soap/envelope/"
xmlns:xs="http://www.w3.org/2001/XMLSchema"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<Conditions>
<faultName xmlns:medns="http://schemas.oracle.com/mediator/faults" name="medns:1303">
<condition>
<action ref="java-fault-handler"/>
</condition>
</faultName>
</Conditions>
<Actions>
<Action id="java-fault-handler">
<javaAction className="edu.villanova.soa.handlers.FaultNotificationHandler"
defaultAction="ora-human-intervention" propertySet="faultNotificationProps">
<returnValue value="OK" ref="ora-human-intervention"/>
</javaAction>
</Action>

<Action id="ora-human-intervention">
<humanIntervention/>
</Action>

<Action id="ora-terminate">
<abort/>
</Action>
</Actions>

<Properties>

<propertySet name="faultNotificationProps">
<property name="from">[email protected]</property>
<property name="to">[email protected]</property>
<property name="subject">Reporting a SOA rejected msg. fault</property>
</propertySet>
</Properties>
</faultPolicy>
</faultPolicies>
My fault-bindings.xml file is as follows:
<?xml version="1.0" encoding="UTF-8" ?>
<faultPolicyBindings version="2.0.1"
xmlns="http://schemas.oracle.com/bpel/faultpolicy"
xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<composite faultPolicy="NewStudentRegistrationFaults"/>
<component faultPolicy="MediatorFaults">
<name>NewStudentRegistrationMediator</name>
</component>
<service faultPolicy="NewStudentRegistrationFaults">
<name>GetNewStudentRegistrationFile</name>
</service>
</faultPolicyBindings>
You'll notice that I've tried a number of ways (and various other combinations) to try to steer the error above into my Java fault handler but nothing has meet with success. The mplan is as follows:
<?xml version = '1.0' encoding = 'UTF-8'?>

<Mediator name="NewStudentRegistationMediator" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/sca/1.0/mediator"
wsdlTargetNamespace="http://xmlns.oracle.com/pcbpel/adapter/ftp/Experiments/NewStudentRegistration/GetNewStudentRegistrationFile%2F">
<operation name="Get" deliveryPolicy="AllOrNothing" priority="4"
validateSchema="true">
<switch>
<case executionType="queued" name="RegToBanner.insert_2">
<action>
<transform>
<part name="$out.NewstudentregistrationCollection"
function="xslt(xsl/NewStudentRegistration_To_NewstudentregistrationCollection.xsl, $in.body)"/>
</transform>
<invoke reference="RegToBanner" operation="insert"/>
</action>
</case>
</switch>
</operation>
</Mediator>
I'm a newbie to Oracle SOA. So perhaps I am missing the obvious. But I haven't read much in the documentation specifically about using the XSD validation option on the mediator and have seen nothing specifically about catching this sort of exception in the fault policy (apart from the faults I already have in my policy). Can anyone suggest what I am doing incorrectly here or perhaps whether what I am attempting to do is not possible? Thanks.
- Cris

Has anyone got it working yet?
In my case, I have the following sequence:
FileAdapter -> Mediator1 -> Mediator2->DB Adapter
I am deliberately introducing validation error in File. Isn't it correct to assume Fault framework would get triggered at Mediator1 level since we are invoking FileAdapter service?
I am getting a strange behaviour. If I enable XSD validation at Mediator1 level, process is Faulted with no re-try option. However, if I enable XSD validation ONLY at Mediator2 level, I get Recoverable fault. There seems to be some disconnect between documentation and reality. I am using JDeveloper 11.1.1.3.0 version and SOA Suite 11g.
Thanks,
Amjad.

JAXB Validation Error

Hi,
Iam using JAXB. I get an validation error. When i try to marshal an object to XML. The code is simple as shown below
1. Container.xsd
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://agi.com"
xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://agi.com"
elementFormDefault="qualified">
<complexType name="ContainerType" abstract="true">
<sequence>
<choice>
<element name="File" type="anyType" />
<element name="Pen" type="anyType" />
</choice>
</sequence>
</complexType>
<element name="Container" type="tns:ContainerType" abstract="true" />
</schema>
2. Holder.xsd
<?xml version="1.0" encoding="UTF-8"?>
<schema targetNamespace="http://agi.com"
xmlns="http://www.w3.org/2001/XMLSchema" xmlns:tns="http://agi.com"
elementFormDefault="qualified">
<include schemaLocation="Container.xsd"></include>
<complexType name="HolderType">
<complexContent>
<restriction base="tns:ContainerType">
<sequence>
<choice>
<element name="File">
<complexType>
<sequence>
<element name="FileName"
type="string">
</element>
<element name="Capacity"
type="integer">
</element>
</sequence>
</complexType>
</element>
<element name="Pen">
<complexType>
<sequence>
<element name="Make"
type="string">
</element>
</sequence>
</complexType>
</element>
</choice>
</sequence>
</restriction>
</complexContent>
</complexType>
<element name="Holder" type="tns:HolderType"></element>
</schema>
Main.java
package test.client;
import java.io.PrintWriter;
import java.io.StringWriter;
import java.math.BigInteger;
import java.util.List;
import javax.xml.bind.JAXBContext;
import javax.xml.bind.Marshaller;
import javax.xml.bind.Unmarshaller;
import javax.xml.bind.Validator;
import test.vo.AnyType;
import test.vo.Holder;
import test.vo.ObjectFactory;
import test.vo.HolderType.FileType;
import test.vo.HolderType.PenType;
import com.sun.xml.bind.StringInputStream;
public class Main {
public static void main(String s[]) throws Exception{
JAXBContext ctx = JAXBContext.newInstance("test.vo" );
ObjectFactory obj = new ObjectFactory();
Holder input = obj.createHolder();
FileType file = obj.createHolderTypeFileType();
file.setCapacity( BigInteger.valueOf(35) );
file.setFileName("Accounts");
AnyType any = obj.createAnyType();
List lst = any.getContent();
lst.add(file);
input.setFile(any);
Marshaller marsh = ctx.createMarshaller();
marsh.setProperty(Marshaller.JAXB_FORMATTED_OUTPUT,
new Boolean(true));
marsh.setProperty(Marshaller.JAXB_SCHEMA_LOCATION,
"http://agi.com");
Validator validator = ctx.createValidator();
validator.validate(input);
StringWriter sw = new StringWriter();
marsh.marshal(input, new PrintWriter(sw) );
StringBuffer sb = sw.getBuffer();
System.out.println(sb.toString() );
This throws the following exception
DefaultValidationEventHandler: [ERROR]: tag name "test.vo.AnyType" is not allowed. Possible tag names are: <test.vo.HolderType.FileType>
Location: obj: test.vo.impl.HolderImpl@1cd8669
Exception in thread "main" com.sun.xml.bind.serializer.AbortSerializationException: tag name "test.vo.AnyType" is not allowed. Possible tag names are: <test.vo.HolderType.FileType>
at test.vo.impl.runtime.ValidationContext.reportEvent(ValidationContext.java:199)
at test.vo.impl.runtime.ValidationContext.reportEvent(ValidationContext.java:166)
at test.vo.impl.runtime.MSVValidator.childAsElementBody(MSVValidator.java:336)
at test.vo.impl.runtime.MSVValidator.childAsBody(MSVValidator.java:292)
at test.vo.impl.ContainerTypeImpl.serializeBody(ContainerTypeImpl.java:52)
at test.vo.impl.HolderTypeImpl.serializeBody(HolderTypeImpl.java:30)
at test.vo.impl.HolderImpl.serializeBody(HolderImpl.java:43)
at test.vo.impl.runtime.MSVValidator._validate(MSVValidator.java:102)
at test.vo.impl.runtime.MSVValidator.validate(MSVValidator.java:77)
at test.vo.impl.runtime.ValidationContext.validate(ValidationContext.java:75)
at test.vo.impl.runtime.ValidatorImpl.validate(ValidatorImpl.java:121)
at test.vo.impl.runtime.ValidatorImpl.validate(ValidatorImpl.java:104)
at test.client.Main.main(Main.java:63)
However if i commentout the validation it works fine yeilding the
following result
<?xml version="1.0" encoding="UTF-8" standalone="yes"?>
<Holder xsi:schemaLocation="http://agi.com" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://agi.com">
<File>
<FileName>Accounts</FileName>
<Capacity>35</Capacity>
</File>
</Holder>
Which look good conforming to the schema above
It willbe helpful if someout could point out the mistake iam doing
Please help
Regards
Agilan Palani

I changed the code
marsh.setProperty(Marshaller.JAXB_SCHEMA_LOCATION,"http://agi.com Holder.xsd");
to
marsh.setProperty(Marshaller.JAXB_SCHEMA_LOCATION,"http://agi.com E:/Agilan/Holder.xsd");
But still the same error.
I have validated the generated xml using XMLObjective. It says the generated xml is valid against the schema.
I really dont know why the JAXB validation fails?
Please help

JAXB unmarshalling error

We are getting a JAXB unmarshalling error:
while processing the following <condition> tag which is of type xsd:string
<condition> x < 100 </condition>
The error is probably happening due to "<" token as a part of string type.
xml.bind.JAXBException: Unexpected error in Unmarshalling
at oracle.xml.jaxb.JaxbUnmarshaller.unmarshal(JaxbUnmarshaller.java:224)
Any ideas how to resolve this issue?
Note
<condition> x >100 </condition> is getting unmarshalled successfully by JAXB unmarshaller.
Thanks

Hi,
Did you tried to put & lt; (without space) instead of < ?
Best Regards,
Paweł

JAXB unmarshalling error for " " token as part of xsd:string type element

JAXB unmarshalling error for "<" token as part of xsd:string type element
We are getting a JAXB unmarshalling error:
while processing the following <condition> tag which is of type xsd:string
<condition> x < 100 </condition>
The error is probably happening due to "<" token as a part of string type.
xml.bind.JAXBException: Unexpected error in Unmarshalling
at oracle.xml.jaxb.JaxbUnmarshaller.unmarshal(JaxbUnmarshaller.java:224)
Any ideas how to resolve this issue?
Note
<condition> x > 100 </condition> is getting unmarshalled successfully by JAXB unmarshaller.
Thanks

Hi,
Did you tried to put & lt; (without space) instead of < ?
Best Regards,
Paweł

JAXB unmarshalling elements with xs:type explicitly set

I am working with XML content where the XSD defines an element as being of a complexType (say "ParentType") but the content explicitly sets the element's xs:type attribute to an extension of that complexType (say "ChildType").
As far as I can tell the XML is valid, but JAXB issues the following when unmarshalling:
DefaultValidationEventHandler: [ERROR]: Unexpected element {}:child1
javax.xml.bind.UnmarshalException: Unexpected element {}:child1
Where <child1> is added via the extension.
Is this a problem with JAXB or my XSD?
(XSD and XML enclosed below)
XSD ------------------
<?xml version="1.0" encoding="UTF-8"?>
<xs:schema xmlns:xs="http://www.w3.org/2001/XMLSchema" elementFormDefault="qualified" attributeFormDefault="unqualified">
<xs:complexType name="ParentType">
<xs:sequence>
<xs:element name="parent1" type="xs:string"/>
<xs:element name="parent2" type="xs:string"/>
</xs:sequence>
</xs:complexType>
<xs:complexType name="ChildType">
<xs:complexContent>
<xs:extension base="ParentType">
<xs:sequence>
<xs:element name="child1" type="xs:string"/>
</xs:sequence>
</xs:extension>
</xs:complexContent>
</xs:complexType>
<xs:element name="root">
<xs:complexType>
<xs:sequence>
<xs:element name="child" type="ParentType"/>
</xs:sequence>
</xs:complexType>
</xs:element>
</xs:schema>
XML -----------------------
<?xml version="1.0" encoding="UTF-8"?>
<root xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:noNamespaceSchemaLocation="problem.xsd">
<child xsi:type="ChildType">
<parent1/>
<parent2/>
<child1/>
</child>
</root>

JAXB doesn't handle OO schema design. I tried to do something similar where I defined a type called base and then defined that my document contained 1 or more base elements. Then I tried to unmarshall a document that contained elements that were of types extending from base. I ended up with the same issue.
It seems that when the xjc compiler defines the classes it isn't smart enough to realize the element defined as parent could also contain a child element since child extends parent. Your XSD and XML are valid.
I would think that JAXB should identify that because there is a type the extends the defined type, that an element of the sub-type might be subsituted i.e. check the actual type of the element in the XML before attempting to unmarshall it as the default type. It doesn't do that. I am not sure if this is as desinged, or a flaw in the implementation.

Jaxb unmarshalling and setvalidating()

I am using jaxb 1.0 with jdk1.4 , i am trying to unmarshall the incoming request which a xml.
It has a element called attachment list which is mandatory as per the schema. but i dont want my unmarshaller to validate request and throw error instead i just need to objects from unmarshaller. so i set the setvalidating(false).but i am still getting the validation error.Any help in this is highly appreciated.

Check the date of the post dude - its months old and the dude who posted it hasn't been back since then (only one post, this one). If you want to help, focus on recent threads. Resurrecting old threads triggers other helpful people to unnecessarily invest time into them and creates extra work for the moderators.

Weblogic app server wsdl web service call with SSL Validation error = 16

Weblogic app server wsdl web service call with SSL Validation error = 16
I need to make wsdl web service call in my weblogic app server. The web service is provided by a 3rd party vendor. I keep getting error
Cannot complete the certificate chain: No trusted cert found
Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure
Validation error = 16
From the SSL debug log, I can see 3 verisign hierarchy certs are correctly loaded (see 3 lines in the log message starting with “adding as trusted cert”). But somehow after first handshake, I got error “Cannot complete the certificate chain: No trusted cert found”.
Here is how I load trustStore and keyStore in my java program:
     System.setProperty("javax.net.ssl.trustStore",”cacerts”);
     System.setProperty("javax.net.ssl.trustStorePassword", trustKeyPasswd);
     System.setProperty("javax.net.ssl.trustStoreType","JKS");
System.setProperty("javax.net.ssl.keyStoreType","JKS");
System.setProperty("javax.net.ssl.keyStore", keyStoreName);
     System.setProperty("javax.net.ssl.keyStorePassword",clientCertPwd);      System.setProperty("com.sun.xml.ws.transport.http.client.HttpTransportPipe.dump","true");
Here is how I create cacerts using verisign hierarchy certs (in this order)
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignClass3G5PCA3Root.txt -alias "Verisign Class3 G5P CA3 Root"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediatePrimary.txt -alias "Verisign C3 G5 Intermediate Primary"
1.6.0_29/jre/bin/keytool -import -trustcacerts -keystore cacerts -storepass changeit -file VerisignC3G5IntermediateSecondary.txt -alias "Verisign C3 G5 Intermediate Secondary"
Because my program is a weblogic app server, when I start the program, I have java command line options set as:
-Dweblogic.security.SSL.trustedCAKeyStore=SSLTrust.jks
-Dweblogic.security.SSL.ignoreHostnameVerification=true
-Dweblogic.security.SSL.enforceConstraints=strong
That SSLTrust.jks is the trust certificate from our web server which sits on a different box. In our config.xml file, we also refer to the SSLTrust.jks file when we bring up the weblogic app server.
In addition, we have working logic to use some other wsdl web services from the same vendor on the same SOAP server. In the working web service call flows, we use clientgen to create client stub, and use SSLContext and WLSSLAdapter to load trustStore and keyStore, and then bind the SSLContext and WLSSLAdapter objects to the webSerive client object and make the webservie call. For the new wsdl file, I am told to use wsimport to create client stub. In the client code created, I don’t see any way that I can bind SSLContext and WLSSLAdapter objects to the client object, so I have to load certs by settting system pramaters. Here I attached the the wsdl file.
I have read many articles. It seems as long as I can install the verisign certs correctly to web logic server, I should have fixed the problem. Now the questions are:
1.     Do I create “cacerts” the correct order with right keeltool options?
2.     Since command line option “-Dweblogic.security.SSL.trustedCAKeyStore” is used for web server jks certificate, will that cause any problem for me?
3.     Is it possible to use wsimport to generate client stub that I can bind SSLContext and WLSSLAdapter objects to it?
4.     Do I need to put the “cacerts” to some specific weblogic directory?
---------------------------------wsdl file
<wsdl:definitions name="TokenServices" targetNamespace="http://tempuri.org/" xmlns:wsdl="http://schemas.xmlsoap.org/wsdl/" xmlns:soap="http://schemas.xmlsoap.org/wsdl/soap/" xmlns:soapenc="http://schemas.xmlsoap.org/soap/encoding/" xmlns:wsu="http://docs.oasis-open.org/wss/2004/01/oasis-200401-wss-wssecurity-utility-1.0.xsd" xmlns:xsd="http://www.w3.org/2001/XMLSchema" xmlns:soap12="http://schemas.xmlsoap.org/wsdl/soap12/" xmlns:tns="http://tempuri.org/" xmlns:wsa="http://schemas.xmlsoap.org/ws/2004/08/addressing" xmlns:wsp="http://schemas.xmlsoap.org/ws/2004/09/policy" xmlns:wsap="http://schemas.xmlsoap.org/ws/2004/08/addressing/policy" xmlns:wsaw="http://www.w3.org/2006/05/addressing/wsdl" xmlns:msc="http://schemas.microsoft.com/ws/2005/12/wsdl/contract" xmlns:wsa10="http://www.w3.org/2005/08/addressing" xmlns:wsx="http://schemas.xmlsoap.org/ws/2004/09/mex" xmlns:wsam="http://www.w3.org/2007/05/addressing/metadata">
     <wsp:Policy wsu:Id="TokenServices_policy">
          <wsp:ExactlyOne>
               <wsp:All>
                    <sp:TransportBinding xmlns:sp="http://schemas.xmlsoap.org/ws/2005/07/securitypolicy">
                         <wsp:Policy>
                              <sp:TransportToken>
                                   <wsp:Policy>
                                        <sp:HttpsToken RequireClientCertificate="true"/>
                                   </wsp:Policy>
                              </sp:TransportToken>
                              <sp:AlgorithmSuite>
                                   <wsp:Policy>
                                        <sp:Basic256/>
                                   </wsp:Policy>
                              </sp:AlgorithmSuite>
                              <sp:Layout>
                                   <wsp:Policy>
                                        <sp:Strict/>
                                   </wsp:Policy>
                              </sp:Layout>
                         </wsp:Policy>
                    </sp:TransportBinding>
                    <wsaw:UsingAddressing/>
               </wsp:All>
          </wsp:ExactlyOne>
     </wsp:Policy>
     <wsdl:types>
          <xsd:schema targetNamespace="http://tempuri.org/Imports">
               <xsd:import schemaLocation="xsd0.xsd" namespace="http://tempuri.org/"/>
               <xsd:import schemaLocation="xsd1.xsd" namespace="http://schemas.microsoft.com/2003/10/Serialization/"/>
          </xsd:schema>
     </wsdl:types>
     <wsdl:message name="ITokenServices_GetUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetUserTokenResponse"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_InputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserToken"/>
     </wsdl:message>
     <wsdl:message name="ITokenServices_GetSSOUserToken_OutputMessage">
          <wsdl:part name="parameters" element="tns:GetSSOUserTokenResponse"/>
     </wsdl:message>
     <wsdl:portType name="ITokenServices">
          <wsdl:operation name="GetUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetUserToken" message="tns:ITokenServices_GetUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetUserTokenResponse" message="tns:ITokenServices_GetUserToken_OutputMessage"/>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <wsdl:input wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserToken" message="tns:ITokenServices_GetSSOUserToken_InputMessage"/>
               <wsdl:output wsaw:Action="http://tempuri.org/ITokenServices/GetSSOUserTokenResponse" message="tns:ITokenServices_GetSSOUserToken_OutputMessage"/>
          </wsdl:operation>
     </wsdl:portType>
     <wsdl:binding name="TokenServices" type="tns:ITokenServices">
          <wsp:PolicyReference URI="#TokenServices_policy"/>
          <soap12:binding transport="http://schemas.xmlsoap.org/soap/http"/>
          <wsdl:operation name="GetUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
          <wsdl:operation name="GetSSOUserToken">
               <soap12:operation soapAction="http://tempuri.org/ITokenServices/GetSSOUserToken" style="document"/>
               <wsdl:input>
                    <soap12:body use="literal"/>
               </wsdl:input>
               <wsdl:output>
                    <soap12:body use="literal"/>
               </wsdl:output>
          </wsdl:operation>
     </wsdl:binding>
     <wsdl:service name="TokenServices">
          <wsdl:port name="TokenServices" binding="tns:TokenServices">
               <soap12:address location="https://ws-eq.demo.i-deal.com/PhxEquity/TokenServices.svc"/>
               <wsa10:EndpointReference>
                    <wsa10:Address>https://ws-eq.demo.xxx.com/PhxEquity/TokenServices.svc</wsa10:Address>
               </wsa10:EndpointReference>
          </wsdl:port>
     </wsdl:service>
</wsdl:definitions>
----------------------------------application log
adding as trusted cert:
Subject: CN=VeriSign Class 3 International Server CA - G3, OU=Terms of use at https://www.verisign.com/rpa (c)10, OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x641be820ce020813f32d4d2d95d67e67
Valid from Sun Feb 07 19:00:00 EST 2010 until Fri Feb 07 18:59:59 EST 2020
adding as trusted cert:
Subject: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x3c9131cb1ff6d01b0e9ab8d044bf12be
Valid from Sun Jan 28 19:00:00 EST 1996 until Wed Aug 02 19:59:59 EDT 2028
adding as trusted cert:
Subject: CN=VeriSign Class 3 Public Primary Certification Authority - G5, OU="(c) 2006 VeriSign, Inc. - For authorized use only", OU=VeriSign Trust Network, O="VeriSign, Inc.", C=US
Issuer: OU=Class 3 Public Primary Certification Authority, O="VeriSign, Inc.", C=US
Algorithm: RSA; Serial number: 0x250ce8e030612e9f2b89f7054d7cf8fd
Valid from Tue Nov 07 19:00:00 EST 2006 until Sun Nov 07 18:59:59 EST 2021
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Ignoring not supported JCE Cipher: SunPKCS11-Solaris version 1.6 for algorithm DESede/CBC/NoPadding>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Will use default Cipher for algorithm DESede>
<Mar 7, 2013 6:59:21 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Using JCE Cipher: SunJCE version 1.6 for algorithm RSA/ECB/NoPadding>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSetup: loading trusted CA certificates>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 28395435>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <25779276 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - xx.xxx.xxx.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 6457753>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.removeContext(ctx): 22803607>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Filtering JSSE SSLSocket>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLIOContextTable.addContext(ctx): 14640403>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLSocket will be Muxing>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write HANDSHAKE, offset = 0, length = 115>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <isMuxerActivated: false>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 SSL3/TLS MAC>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <23376797 received HANDSHAKE>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: ServerHello>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <HANDSHAKEMESSAGE: Certificate>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Cannot complete the certificate chain: No trusted cert found>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 0 in the chain: Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validating certificate 1 in the chain: Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <validationCallback: validateErr = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[0] = Serial number: 2400410601231772600606506698552332774
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Subject:C=US, ST=New York, L=New York, O=xxx LLC, OU=GTIG, CN=ws-eq.demo.xxx.com
Not Valid Before:Tue Dec 18 19:00:00 EST 2012
Not Valid After:Wed Jan 07 18:59:59 EST 2015
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> < cert[1] = Serial number: 133067699711757643302127248541276864103
Issuer:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=(c) 2006 VeriSign, Inc. - For authorized use only, CN=VeriSign Class 3 Public Primary Certification Authority - G5
Subject:C=US, O=VeriSign, Inc., OU=VeriSign Trust Network, OU=Terms of use at https://www.verisign.com/rpa (c)10, CN=VeriSign Class 3 International Server CA - G3
Not Valid Before:Sun Feb 07 19:00:00 EST 2010
Not Valid After:Fri Feb 07 18:59:59 EST 2020
Signature Algorithm:SHA1withRSA
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <weblogic user specified trustmanager validation status 16>
<Mar 7, 2013 6:59:22 PM EST> <Warning> <Security> <BEA-090477> <Certificate chain received from ws-eq.demo.xxx.com - 12.29.210.156 was not trusted causing SSL handshake failure.>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Validation error = 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Certificate chain is untrusted>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <SSLTrustValidator returns: 16>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <Trust status (16): CERT_CHAIN_UNTRUSTED>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <NEW ALERT with Severity: FATAL, Type: 42
java.lang.Exception: New alert stack
     at com.certicom.tls.record.alert.Alert.<init>(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.fireAlert(Unknown Source)
     at com.certicom.tls.record.handshake.ClientStateReceivedServerHello.handle(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessage(Unknown Source)
     at com.certicom.tls.record.handshake.HandshakeHandler.handleHandshakeMessages(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.interpretContent(Unknown Source)
     at com.certicom.tls.record.MessageInterpreter.decryptMessage(Unknown Source)
     at com.certicom.tls.record.ReadHandler.processRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readRecord(Unknown Source)
     at com.certicom.tls.record.ReadHandler.readUntilHandshakeComplete(Unknown Source)
     at com.certicom.tls.interfaceimpl.TLSConnectionImpl.completeHandshake(Unknown Source)
     at com.certicom.tls.record.WriteHandler.write(Unknown Source)
     at com.certicom.io.OutputSSLIOStreamWrapper.write(Unknown Source)
     at java.io.BufferedOutputStream.flushBuffer(BufferedOutputStream.java:65)
     at java.io.BufferedOutputStream.flush(BufferedOutputStream.java:123)
     at java.io.FilterOutputStream.flush(FilterOutputStream.java:123)
     at weblogic.net.http.HttpURLConnection.writeRequests(HttpURLConnection.java:154)
     at weblogic.net.http.HttpURLConnection.getInputStream(HttpURLConnection.java:358)
     at weblogic.net.http.SOAPHttpsURLConnection.getInputStream(SOAPHttpsURLConnection.java:37)
     at weblogic.wsee.util.is.InputSourceUtil.loadURL(InputSourceUtil.java:100)
     at weblogic.wsee.util.dom.DOMParser.getWebLogicDocumentImpl(DOMParser.java:118)
     at weblogic.wsee.util.dom.DOMParser.getDocument(DOMParser.java:65)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:311)
     at weblogic.wsee.wsdl.WsdlReader.getDocument(WsdlReader.java:305)
     at weblogic.wsee.jaxws.spi.WLSProvider.readWSDL(WLSProvider.java:296)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:77)
     at weblogic.wsee.jaxws.spi.WLSProvider.createServiceDelegate(WLSProvider.java:62)
     at javax.xml.ws.Service.<init>(Service.java:56)
     at ideal.ws2j.eqtoken.TokenServices.<init>(TokenServices.java:64)
     at com.citi.ilrouter.util.IpreoEQSSOClient.invokeRpcPortalToken(IpreoEQSSOClient.java:165)
     at com.citi.ilrouter.servlets.T3LinkServlet.doPost(T3LinkServlet.java:168)
     at com.citi.ilrouter.servlets.T3LinkServlet.doGet(T3LinkServlet.java:206)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:707)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:820)
     at weblogic.servlet.internal.StubSecurityHelper$ServletServiceAction.run(StubSecurityHelper.java:227)
     at weblogic.servlet.internal.StubSecurityHelper.invokeServlet(StubSecurityHelper.java:125)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:292)
     at weblogic.servlet.internal.ServletStubImpl.execute(ServletStubImpl.java:175)
     at weblogic.servlet.internal.WebAppServletContext$ServletInvocationAction.run(Unknown Source)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:321)
     at weblogic.security.service.SecurityManager.runAs(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.securedExecute(Unknown Source)
     at weblogic.servlet.internal.WebAppServletContext.execute(Unknown Source)
     at weblogic.servlet.internal.ServletRequestImpl.run(Unknown Source)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:201)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:173)
>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <write ALERT, offset = 0, length = 2>
<Mar 7, 2013 6:59:22 PM EST> <Debug> <SecuritySSL> <BEA-000000> <close(): 16189141>

I received a workaround by an internal message.
The how to guide is :
-Download the wsdl file (with bindings, not the one from ESR)
-Correct it in order that the schema corresponds to the answer (remove minOccurs or other things like this)
-Deploy the wsdl file on you a server (java web project for exemple). you can deploy on your local
-Create a new logicial destination that point to the wsdl file modified
-Change the metadata destination in your web dynpro project for the corresponding model and keep the execution desitnation as before.
Then the received data is check by the metadata logical destination but the data is retrieved from the correct server.

LV7.1 Strange behavior with Automatic Error Handling occuring when it shouldn't [LV 7.1 Pro on WinXP for Tablet PC's]

[LV 7.1 Pro on WinXP for Tablet PC's]
I recently let a rather large LV app of mine run in the development environment while I was out for a couple of days. Upon returning I found that the app had hung for ~22 hours waiting for an answer to an Automatic Error Handling (AEH) dialog proclaiming an Error 7 in New File without any indication of the VI hierarchy that called New File. I set about ensuring that AEH dialogs would not pop up and have not been able to discover how I could have possibly received one in the first place.
Subsequent investigation revealed:
Neither AEH option in Options>Block Diagrams were checked.
Network problems had occurred around the time that the app had hung. All file paths are network paths when running in the development environment, so the cause of the error was most likely valid, even if the AEH dialog appearance wasn't.
My app has only one instance where the New File primitive is used by me. That subVI and all others above it in the hierarchy DO NOT have the AEH property enabled. The error out cluster of New File in my subvi is wired.
My app has three instances where New File is called from a vi.lib vi (Open/Create/Replace File.vi, Open Config Data.vi, and Prompt Web Browser Path.vi), none of which have the AEH property enabled. Nor does any of their calling VI's. All three instances also have their error out cluster wired.
A utility to examine the AEH property of all VI's (with all top level and dynamic VI's loaded) in memory reported that only 1 of 308 vi's ( RGT Does File Exists.vi from the Report Generation Toolkit) had that property true. That vi has no subVI's other than the File/Directory Info primitive and no calling VI's in common with any of the vi's that call New File, except a top level VI.
As long as 'Enable automatic error handling dialogs' remains unselected in options>block diagram, I am unable to get an AEH dialog for either the New File or File/Directory Info primitives in a test VI with AEH property enabled and their error out clusters unwired no matter what invalid path I pass to the functions. As soon as the options>block diagram>Enable AEH dialogs' is selected, both primitives fire AEH dialogs with no error out wired and don't when wired. i.e. works as advertised.
In other words I can find no reason why I should have gotten the problem AEH dialog...
I cannot afford for this app to hang because of a network problem, other portions of the app that were running concurrently correctly handled the error and, had the AEH dialog not appeared, the app would have made corrections or shutdown in an orderly fashion.
Any ideas?

Very good.
Write Characters to File.vi>Open/Create/Replace File.vi>New File
New File throws the error. Open/Create/Replace strips the hierarchy from the source of the error. Write Characters passes it to the General Error Handler. I never looked above O/C/R file in the hierarchy except for enable automatic error handling property. The tip-off should have been to realize that O/C/R file was stripping the hierarchy from the error and look above that.
The real irony is that Write Characters was being used to log error cluster data to an error log file...
Save as... Copy without updating... the OEM 'Write Characters to File' is gone from this app.
Thanx (a bunch)

Help needed in implementing validation event handler in OIM 11g

Hello experts,
I am trying to set username policy by implementing a validation event handler in OIM 11.1.1.5.
Following are the steps followed
1. Import metadata
Created a file called Eventhandler.xml as below and imported using weblogicImportmetadata.sh
<?xml version='1.0' encoding='UTF-8'?>
<eventhandlers xmlns="http://www.oracle.com/schema/oim/platform/kernel" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xsi:schemaLocation="http://www.oracle.com/schema/oim/platform/kernel orchestration-handlers.xsd">
<validation-handler class="test.iam.eventhandlers.CustomValidationEventHandler" entity-type="User" operation="CREATE" name="CustomValidationEventHandler" order="1000" sync="TRUE"/>
</eventhandlers>
2. Register plugin
plugin.xml
<?xml version="1.0" encoding="UTF-8"?>
<oimplugins xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance">
<plugins pluginpoint="oracle.iam.platform.kernel.spi.ValidationHandler">
<plugin pluginclass="test.iam.eventhandlers.CustomValidationEventHandler" version="1.0" name="CustomValidationEventHandler" />
</plugins>
</oimplugins>
Just givng sys out in the below code to check whther it is getting triggerred during user create.
package test.iam.eventhandlers;
import java.util.HashMap;
import oracle.iam.platform.Platform;
import oracle.iam.platform.context.ContextAware;
import oracle.iam.platform.kernel.ValidationException;
import oracle.iam.platform.kernel.ValidationFailedException;
import oracle.iam.platform.kernel.spi.ValidationHandler;
import oracle.iam.platform.kernel.vo.BulkEventResult;
import oracle.iam.platform.kernel.vo.BulkOrchestration;
import oracle.iam.platform.kernel.vo.Orchestration;
public class CustomValidationEventHandler implements ValidationHandler {
     @Override
     public void initialize(HashMap<String, String> arg0) {
     // TODO initialization
          System.out.println("init validate event handler");
     @Override
     public void validate(long processId, long eventId, Orchestration orchestration)
     throws ValidationException, ValidationFailedException {
          System.out.println("Beginning of validation");
          System.out.println("End of validation");
     @Override
     public void validate(long processId, long eventId, BulkOrchestration arg2)
     throws ValidationException, ValidationFailedException {
     // TODO - N/A
          System.out.println("Bulk Orchestration not yet implemented");
Now when i create a user it is not allowing and i am getting system error in the front end and in the logs i could see something below
<May 28, 2012 3:03:29 PM CEST> <Error> <oracle.iam.identity.usermgmt.impl> <IAM-3050029> <The user cannot be created due to validation errors.
oracle.iam.platform.kernel.ValidationFailedException: Event handler CustomValidationEventHandler implemented using class/plug-test.iam.eventhandlers.CustomValidationEventHandler could not be loaded.
at oracle.iam.platform.kernel.impl.OrchProcessData.runValidationEvents(OrchProcessData.java:177)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.validate(OrchestrationEngineImpl.java:644)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.process(OrchestrationEngineImpl.java:497)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:444)
at oracle.iam.platform.kernel.impl.OrchestrationEngineImpl.orchestrate(OrchestrationEngineImpl.java:378)
at oracle.iam.identity.usermgmt.impl.UserManagerImpl.create(UserManagerImpl.java:656)
at oracle.iam.identity.usermgmt.api.UserManagerEJB.createx(Unknown Source)
at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
at java.lang.reflect.Method.invoke(Method.java:597)
at com.bea.core.repackaged.springframework.aop.support.AopUtils.invokeJoinpointUsingReflection(AopUtils.java:310)
at com.bea.core.repackaged.springframework.aop.framework.ReflectiveMethodInvocation.invokeJoinpoint(ReflectiveMethodInvocation.java:182)
I have implemented preprocess and postprocess event handler before with similar kind of plugin registration, metadata import and everything worked fine. Not sure what is the problem here with validation event handler.
Thanks
DK

Instead of registering the plug-in can u try placing it in the plugins folder under Oracle_IDM1/server folder.
at times restart is required. esp when the server is running in production mode.
Regards
user12841694

Validation error message display

I am creating a registration form with a bunch of required fields and validation messages which are associated with these fields. I have a state drop down, a province drop down and a region textfield, only one of them will be rendered depending on the selected value from a country drop down. My problem is that when the user selects a country I get validation errors for fields that haven't yet been filled out. Is there a way to ignore validation on a value_change from the country dropdown? I.E only have a validation occur when the submit button is pressed?
Thanks ,
Kevin

Kevin,
As you already created a registration fom with a bunch of required fields and validation messages which are associated with those foelds, could you please let me know how you handled all the custom messagess for all required fields. I have some knowledge using resource bundle- required key..but will handle one at a time. How we can handle all at a time and can display message on the top of the page when we click "submit" button when all field are empty .
Your early reply will be highly appreciated!
Thanks,
Hiten

Error Handling in File Adapter

I have been working on a requirement where the file adapter picks up the file and gives to the BPEL for processing the data.
So, in order to do Error Handling for file adapter, i have been reading the Oracle documentation for technology adapters. In that, some of the
points which i felt valuable for my error handling when using file adapter are the uniqueMessageSeparator property, fault-policies for rejected messages,
and one of the action for rejected messages could be writing the payload to a file or invoking any other webservice.
In my composite, i have configured the file adapter as a service for reading files, and i defined the xsd using the native format builder....If i put some data like 'aaaa' in the attribute of type integer , the .csv file is being picked up and its being passed to the BPEL without any error ? I believe there should be a translation error...right...
But i am not getting the error, please tell me if anything is wrong in my xsd....
Here is my xsd...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/InboundService"
targetNamespace="http://TargetNamespace.com/InboundService"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="names">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="name" minOccurs="1" maxOccurs="unbounded">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
And for DB Adapter, there is a property called SchemaValidation, i think that is not there for File adapter, by default it will take care of validation i guess....In another composite, my file adapter is picking up the .xml file and if i put any wrong data over there, that is working fine, i am getting the translation error, but only here in the case of csv file, i am not getting the error. Experts, please help me in this regard...I am using SOA 11G
Thanks,
Naresh

Hi Yatan,
Thanks for the reply. I did the same way, where my composite is picking up an XML file and translation error is coming. Even the fault policies are working fine, like writing to a file and even invoking other web service. Its really good that you have achieved the same thing in csv files. But the same thing i am unable to achieve when my file adapter is picking up the csv file. I really cant understand where i am doing wrong.
here is my XSD which i defined through my native builder format...
<?xml version="1.0" encoding="UTF-8" ?>
<xsd:schema xmlns:xsd="http://www.w3.org/2001/XMLSchema"
xmlns:nxsd="http://xmlns.oracle.com/pcbpel/nxsd"
xmlns:tns="http://TargetNamespace.com/FileRecv"
targetNamespace="http://TargetNamespace.com/FileRecv"
elementFormDefault="qualified"
attributeFormDefault="unqualified"
nxsd:version="NXSD"
nxsd:stream="chars"
nxsd:encoding="US-ASCII"
nxsd:hasHeader="true"
nxsd:headerLines="1"
nxsd:headerLinesTerminatedBy="${eol}"
>
<xsd:element name="Roots">
<xsd:complexType>
<xsd:sequence>
<xsd:element name="FirstName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="LastName" type="xsd:string" nxsd:style="terminated" nxsd:terminatedBy="," nxsd:quotedBy=""" />
<xsd:element name="Number" type="xsd:integer" nxsd:style="terminated" nxsd:terminatedBy="${eol}" nxsd:quotedBy=""" />
</xsd:sequence>
</xsd:complexType>
</xsd:element>
</xsd:schema>
the jca file ..
<adapter-config name="FileRecv" adapter="File Adapter" wsdlLocation="FileRecv.wsdl" xmlns="http://platform.integration.oracle/blocks/adapter/fw/metadata">
<connection-factory location="eis/FileAdapter" UIincludeWildcard="n*.csv"/>
<endpoint-activation portType="Read_ptt" operation="Read">
<activation-spec className="oracle.tip.adapter.file.inbound.FileActivationSpec">
<property name="DeleteFile" value="true"/>
<property name="MinimumAge" value="0"/>
<property name="PhysicalDirectory" value="C:\files"/>
<property name="Recursive" value="false"/>
<property name="PollingFrequency" value="5"/>
<property name="IncludeFiles" value="n.*\.csv"/>
<property name="UseHeaders" value="false"/>
</activation-spec>
</endpoint-activation>
</adapter-config>
I told that the file will contain only 1 record while defining xsd and i kept a record whose values are John , Peter and akjdkjdskj.
Now if the data is like above, the file is still getting picked up without any translation error and the BPEL is getting completed successfully...
Is it possible for you to send your sample project and the csv file from which you have defined the xsd to me if you dont mind ?
Thanks,
Naresh

How to stop execution after generating error message in an error handler?

I am working on ALSB 3.0.I have a proxy consisting of 2 stages in a pipeline pair. I have error handlers for each of the stages. The first stage contains schema validation action. Whenever the schema validation fails,control should transfer to error handler.
The error handler has a publish action and in request action I am calling an xquery transformation to generate error message.Publish action should publish message to a jms based business service configured. My questions are:
1. After getting into the error handler, the first alert msg configured inside request action (of publish action) is generated.Subsequent actions to generate error xml message and to replace the contents of errorXml in $body are not executed.And so no error message is generated or published.
2. I have also configured a reply with failure. Inspite of that,the control shifts to next stage in request pipeline and execution continues.
Can anyone tell me where I need to do the corrections.
Cheers.
Edited by: arrajago on Jun 15, 2009 11:55 PM

Got the answer.Generate error xml outside publish action.Replace action has to placed inside Publish's request action.To stop execution,use Reply action after Publish.

ABAP Mapping for Error handling in Proxy to JDBC

Hi All,
I am working on a proxy to jdbc scenario in which we have to throw validation errors to NWPM(Net Weaver Process Monitor Tool)
I am following the below steps,
step 1 - In message mapping a UDF is created to catch errors and store them in a variable using dynamic configuration
step 2 - writing abap mapping for handling this thrown exception and im reading the dynamic configuration in the abap class and raising exception. The exception format expected is
SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1>ZPI_THROW_EXCEPTION</SAP:P1>
<SAP:P2>001</SAP:P2/>
<SAP:P3>Mandatory field is missing[BUKRS] </SAP:P3>
   <SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
I have written the following ABAP code to achieve this:
method IF_MAPPING~EXECUTE.
DATA l_record type mpp_dynamic.
DATA error type String.
getting dynamic configuration value
filled in by any previous mapping
CALL METHOD DYNAMIC_CONFIGURATION->GET_RECORD
EXPORTING
    NAMESPACE = 'http://sap.com/xi/XI/System/ERROR'
    NAME      = 'ERROR'
RECEIVING
    RECORD    = l_record.
error = l_record-value.
*raising exception with our message
RAISE EXCEPTION TYPE CX_MAPPING_FAULT
EXPORTING
   TEXTID =
   PREVIOUS =
    ERROR_CODE = '001'
    ERROR_TEXT = error .
RAISE EXCEPTION TYPE CX_MAPPING_FAULT
EXPORTING
   TEXTID =
   PREVIOUS =
    ERROR_CODE = '003'
    ERROR_TEXT = error .
endmethod.
I am gettign the following message for our code:
SAP:Error SOAP:mustUnderstand="" xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/">
<SAP:Category>XIServer</SAP:Category>
<SAP:Code area="RCVR_DETERMINATION">NO_RECEIVER_CASE_ASYNC</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText />
<SAP:Stack>No receiver could be determined</SAP:Stack>
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
Could you please help in finding the solution for getting currect error message from ABAP class?
Edited by: SwethaC on Jan 21, 2011 8:18 AM

The error is due to RFC Call fail from PI system to your ECC Application System.
Check your RFC Destination for ECC System type 3 in PI System.
When you are receiving data from ECC System using Proxies & again you are going to ECC System for Validation.
Why you are not doing this validation on ECC System only in your proxy code ?
In your proxy code, it will be much better for performance to check your data there on same system.

Error Handling in BPM - Send Step

Hello,
I would like to implement the following two error handlers using BPM:
1. There is a send step which sends a message to an HTTP receiver. If the HTTP server is down I would like to add 3 retries and just in case after the third retry fails there should be an error Email sent. So I am wondering whether a communication error (which happens in the HTTP receiver communication channel) is delivered back to the process engine so that it can be handled using BPM.
2. I also need to apply a validation using XML schema. So if validation fails the error should also be returned to the process engine so that it can be handled in the integration process.
Are those two requirement possible as described (returning communication and validation errors)? Or do I have to follow another approach?
Thank you very much!

Hi Florian,
>>2. When I activate transport acknowledgement and there is an error in XML validation outbound channel request I get an system error acknowledgement back however the error branch is NOT taken either!
Correct send step using transport acknowledgment will check whether the message was transmitted or not
Check this link http://help.sap.com/saphelp_nw04s/helpdata/EN/43/65ce41ae343e2be10000000a1553f6/content.htm
>>3. And NOW it gets interesting: When I simulate step 2 again an cancel the error message afterwards then the error branch is taken! Not very useful in my opinion if error messages have to be canceled first. The error branch seems to be pretty useless for me in case of asynchronous send steps.
Again when you cancelled the message it was not received successfully by the receiver system and hence it raised exception (as mentioned in the Exception of send step.)
I will suggest you to try using Application Acknowledgment in send step. Also If you provide the steps of BPM then it will be more helpful.
Also have a look at this :
Asynchronous send step can raise exception only when
1. Thrown when a permanent system error occurs:
a. In the case of an asynchronous send step, the exception will only be triggered if an error occurs during the transfer to the pipeline. Errors that occur during mapping in the pipeline, do not trigger an exception.
b . In the case of a synchronous send step, the exception is also triggered by permanent system errors that occur in the pipeline or while transporting the message to or from the pipeline.
Regards
Suraj
Edited by: S.R.Suraj on Sep 8, 2009 6:41 AM

JAXB Unmarshall Validation Error Handling

Similar Messages

Maybe you are looking for