JCO_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 02667299
Hi Experts,
I am having some issue with PO and ECC connectivity with data load from PO to ECC system via RFC connection
RFC is configured in PO , SOA -> Technical Configuration -> System Connections -> Provider Systems -> Connectivity as below
from NW 731 PO system sending data to ECC system via RFC connection getting the following error
We are getting this error sporadically,
Do I have to do anything with the SLMG log on group for this RFC connection ?
Detail log is attached too as file attachment
Status: Failed
Start Time: 7/10/14 12:56:14 PM GMT
Direction: Outbound
Interface: {urn:sap-com:document:sap:rfc:functions}Z_KCA_FTA_BPM_SAVE_SERV_DR.PortType
Connectivity Type: RFC
Call ID: -2e255256:14718e5ca01:-7b64
InitializeReference ( green square )
ProcessRequest ( gray
ProcessResponse ( gray )
Error: Exception during JCo plugin processing
[EXCEPTION]
com.sap.conn.jco.JCoException: (102) JCO_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 02667299
ERROR connection to partner 'XX.XX.XX.46:3304' broken
TIME Thu Jul 10 15:44:21 2014
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=XX.XX.XX.46:3304; L=???
SYSTEM CALL recv
ERRNO 73
ERRNO TEXT Connection reset by peer
COUNTER 3
(remote system is P1K|sapp1ka4)
at com.sap.sdo.das.jco.JCoInvoker.accept(JCoInvoker.java:386)
at com.sap.engine.services.sca.plugins.jco.JCoImplementationInstance.accept(JCoImplementationInstance.java:63)
at com.sap.engine.services.sca.das.SCADASImpl.invokeReference(SCADASImpl.java:346)
at com.sap.glx.adapter.app.ucon.SCADASWrapperImpl.invoke(SCADASWrapperImpl.java:72)
at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallObject.invokeWebServiceOperation(UnifiedWebServiceCallObject.java:97)
at com.sap.glx.adapter.app.ucon.UnifiedWebServiceCallClass.invoke(UnifiedWebServiceCallClass.java:168)
at com.sap.glx.core.dock.impl.DockObjectImpl.invokeMethod(DockObjectImpl.java:607)
at com.sap.glx.core.kernel.trigger.config.Script$MethodInvocation.execute(Script.java:248)
at com.sap.glx.core.kernel.trigger.config.Script.execute(Script.java:798)
at com.sap.glx.core.kernel.execution.transition.ScriptTransition.execute(ScriptTransition.java:78)
at com.sap.glx.core.kernel.execution.transition.Transition.commence(Transition.java:196)
at com.sap.glx.core.kernel.execution.LeaderWorkerPool$Follower.run(LeaderWorkerPool.java:158)
at com.sap.glx.core.resource.impl.common.WorkWrapper.run(WorkWrapper.java:58)
at com.sap.glx.core.resource.impl.j2ee.J2EEResourceImpl$Sessionizer.run(J2EEResourceImpl.java:271)
at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator$1.run(ServiceUserManager.java:152)
at java.security.AccessController.doPrivileged(Native Method)
at javax.security.auth.Subject.doAs(Subject.java:337)
at com.sap.glx.core.resource.impl.j2ee.ServiceUserManager$ServiceUserImpersonator.run(ServiceUserManager.java:149)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(Native Method)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:185)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:302)
Caused by: RfcException: [P1K|sapp1ka4]
message: CPIC-CALL: CMRCV on convId: 02667299
ERROR connection to partner 'XX.XX.XX.46:3304' broken
TIME Thu Jul 10 15:44:21 2014
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=XX.XX.XX.46:3304; L=???
SYSTEM CALL recv
ERRNO 73
ERRNO TEXT Connection reset by peer
COUNTER 3
Return code: RFC_SYS_EXCEPTION(3)
error group: 102
key: RFC_ERROR_COMMUNICATION
Exception raised by P1K|sapp1ka4
at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:2085)
at com.sap.conn.jco.rt.MiddlewareJavaRfc$JavaRfcClient.execute(MiddlewareJavaRfc.java:1794)
at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:1120)
at com.sap.conn.jco.rt.ClientConnection.execute(ClientConnection.java:953)
at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:1321)
at com.sap.conn.jco.rt.RfcDestination.execute(RfcDestination.java:1292)
at com.sap.conn.jco.rt.AbapFunction.execute(AbapFunction.java:300)
at com.sap.sdo.das.jco.JCoInvoker.accept(JCoInvoker.java:256)
... 21 more
Caused by: com.sap.conn.rfc.exceptions.RfcGetException: CPIC-CALL: CMRCV on convId: 02667299
ERROR connection to partner 'XX.XX.XX.46:3304' broken
TIME Thu Jul 10 15:44:21 2014
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=XX.XX.XX.46:3304; L=???
SYSTEM CALL recv
ERRNO 73
ERRNO TEXT Connection reset by peer
COUNTER 3
at com.sap.conn.rfc.engine.RfcGet.rfcget_gethead(RfcGet.java:459)
at com.sap.conn.rfc.engine.RfcGet.ab_rfcget(RfcGet.java:35)
at com.sap.conn.rfc.engine.RfcRcv.ab_rfcreceive(RfcRcv.java:33)
at com.sap.conn.rfc.engine.RfcIoOpenCntl.RfcReceive(RfcIoOpenCntl.java:1980)
... 28 more
Caused by:
>RfcIoException:
message: CPIC-CALL: CMRCV on convId: 02667299
ERROR connection to partner 'XX.XX.XX.46:3304' broken
TIME Thu Jul 10 15:44:21 2014
RELEASE 720
COMPONENT NI (network interface)
VERSION 40
RC -6
MODULE nixxi.cpp
LINE 5087
DETAIL NiIRead: P=XX.XX.XX.46:3304; L=???
SYSTEM CALL recv
ERRNO 73
ERRNO TEXT Connection reset by peer
COUNTER 3
Return code: RFCIO_ERROR_SYSERROR(5)<
Hi Imtiaz,
Thanks again for your reply.
gw/cpic_timeout is dynamic and I have increased to 40 from 20 , and gw/max_conn is already set to 4000.
To isolate the problem, I have also removed load balancing with the connection, now directly with CI only. This is production, so I have to wait till next data load.
I will update with the result
Thanks
Al Mamun
Similar Messages
-
Hi all<BR>
<BR>
Somtimes I am getting this kind of error message within Portal...<BR>
<BR>
Full Message Text:<BR>
<BR>
failed JCO execute function; stack trace: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 37753022<BR>
<BR>
LOCATION CPIC (TCP/IP) on local host with Unicode<BR>
ERROR connection to partner '10.204.16.xxx:3310' broken<BR>
TIME Sun Nov 28 18:30:17 201<BR>
RELEASE 700<BR>
COMPONENT NI (network interface)<BR>
VERSION 38<BR>
RC -6<BR>
MODULE nixxi.cpp<BR>
LINE 4424<BR>
DETAIL NiIRead<BR>
SYSTEM CALL recv<BR>
ERRNO 10053<BR>
ERRNO TEXT WSAECONNABORTED: Software caused connection abort<BR>
COUNTER 3<BR>
<BR>
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:516) <BR>
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1514) <BR>
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3980) <BR>
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3417) <BR>
at com.sap.mdi.ddtypes.DDFactory.execute(DDFactory.java:173) <BR>
at com.sap.mdi.ddtypes.DDFactory.execute(DDFactory.java:164) <BR>
at com.sap.mdi.ddtypes.DDFactory.getDDObject(DDFactory.java:412) <BR>
at com.sap.dictionary.runtime.mdi.DataProvider.getDataType(DataProvider.java:292) <BR>
at com.sap.dictionary.runtime.DdDictionary.getDataType(DdDictionary.java:94) <BR>
at com.sap.dictionary.runtime.DdBroker.getDataType(DdBroker.java:169) <BR>
at com.sap.dictionary.runtime.DdBroker.getSimpleType(DdBroker.java:175) <BR>
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getSimpleType(DataTypeBroker.java:260) <BR>
at com.sap.tc.webdynpro.services.datatypes.core.DataTypeBroker.getDataType(DataTypeBroker.java:231) <BR>
at com.sap.tc.webdynpro.progmodel.context.DataAttributeInfo.init(DataAttributeInfo.java:318) <BR>
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.initUnmappedAttributes(NodeInfo.java:687) <BR>
at com.sap.tc.webdynpro.progmodel.context.DataNodeInfo.doInit(DataNodeInfo.java:238) <BR>
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:671) <BR>
at com.sap.tc.webdynpro.progmodel.context.NodeInfo.init(NodeInfo.java:674) <BR>
at com.sap.tc.webdynpro.progmodel.context.Context.init(Context.java:40) <BR>
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:199) <BR>
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430) <BR>
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:940) <BR>
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.createComponent(ClientComponent.java:177) <BR>
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponentInternal(ComponentUsage.java:149) <BR>
at com.sap.tc.webdynpro.progmodel.components.ComponentUsage.createComponent(ComponentUsage.java:141) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent$ComponentUsageManager.createBLCComponentUsage(FPMComponent.java:761) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:920) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPM.attachComponentToUsage(FPMComponent.java:891) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent$FPMProxy.attachComponentToUsage(FPMComponent.java:1084) <BR>
at com.sap.xss.ser.xssmenu.vc.area.VcXssMenuArea.onInit(VcXssMenuArea.java:232) <BR>
at com.sap.xss.ser.xssmenu.vc.area.wdp.InternalVcXssMenuArea.onInit(InternalVcXssMenuArea.java:257) <BR>
at com.sap.xss.ser.xssmenu.vc.area.VcXssMenuAreaInterface.onInit(VcXssMenuAreaInterface.java:162) <BR>
at com.sap.xss.ser.xssmenu.vc.area.wdp.InternalVcXssMenuAreaInterface.onInit(InternalVcXssMenuAreaInterface.java:144) <BR>
at com.sap.xss.ser.xssmenu.vc.area.wdp.InternalVcXssMenuAreaInterface$External.onInit(InternalVcXssMenuAreaInterface.java:220) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doProcessEvent(FPMComponent.java:564) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent.doEventLoop(FPMComponent.java:438) <BR>
at com.sap.pcuigp.xssfpm.wd.FPMComponent.wdDoInit(FPMComponent.java:196) <BR>
at com.sap.pcuigp.xssfpm.wd.wdp.InternalFPMComponent.wdDoInit(InternalFPMComponent.java:110) <BR>
at com.sap.tc.webdynpro.progmodel.generation.DelegatingComponent.doInit(DelegatingComponent.java:108) <BR>
at com.sap.tc.webdynpro.progmodel.controller.Controller.initController(Controller.java:215) <BR>
at com.sap.tc.webdynpro.progmodel.controller.Controller.init(Controller.java:200) <BR>
at com.sap.tc.webdynpro.clientserver.cal.ClientComponent.init(ClientComponent.java:430) <BR>
at com.sap.tc.webdynpro.clientserver.cal.ClientApplication.init(ClientApplication.java:362) <BR>
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.initApplication(ApplicationSession.java:783) <BR>
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:303) <BR>
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingPortal(ClientSession.java:761) <BR>
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:696) <BR>
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253) <BR>
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) <BR>
at com.sap.tc.webdynpro.clientserver.session.core.ApplicationHandle.doProcessing(ApplicationHandle.java:73) <BR>
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.sendDataAndProcessActionInternal(AbstractApplicationProxy.java:869) <BR>
at com.sap.tc.webdynpro.portal.pb.impl.AbstractApplicationProxy.create(AbstractApplicationProxy.java:229) <BR>
at com.sap.portal.pb.PageBuilder.updateApplications(PageBuilder.java:1344) <BR>
at com.sap.portal.pb.PageBuilder.createPage(PageBuilder.java:356) <BR>
at com.sap.portal.pb.PageBuilder.init(PageBuilder.java:549) <BR>
at com.sap.portal.pb.PageBuilder.wdDoRefresh(PageBuilder.java:593) <BR>
at com.sap.portal.pb.PageBuilder$1.doPhase(PageBuilder.java:865) <BR>
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processPhaseListener(WindowPhaseModel.java:755) <BR>
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doPortalDispatch(WindowPhaseModel.java:717) <BR>
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:136)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335) <BR>
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143) <BR>
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:333) <BR>
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712) <BR>
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:253) <BR>
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149) <BR>
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62) <BR>
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53) <BR>
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760) <BR>
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853) <BR>
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401) <BR>
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266) <BR>
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386) <BR>
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364) <BR>
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039) <BR>
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265) <BR>
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95) <BR>
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175) <BR>
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process<BR>(ApplicationSessionMessageListener.java:33) <BR>
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41) <BR>
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37) <BR>
at java.security.AccessController.doPrivileged(Native Method) <BR>
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:104) <BR>
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:176) <BR>
<BR>
Thanks a lot in advance.<BR>
Regards,<BR>Hi prodyut kumar sen ,
Thanks for reply.
1. Server Process is ok
2. Logon Group(Tracsation SMLG) is ok.
3. Technical system is ok in SLD.
4. We are already increasing the no of JCo connection as blow.
JCo Pool Configuration
Maximum Pool Size: 50
Maximum Connections: 200
Connection Timeout (msec.): 30
Maximum Waiting Time (msec.): 60
5. Network connection (Ping EP and ERP) is OK.
Ping <host> -l 65500 -t
6. Hosts and Service file is OK.
We have DNS Server. It is ok too.
7. We are already settings for these values as below. (Note 316877).
Environment Variable
CPIC_MAX_CONV = 5000
SAP-Gateway
gw/max_conn = 4000
gw/max_sys=3000
gw/max_overflow_size=60000000
gw/max_shm_req = 400
Profile parameters
rdisp/tm_max_no=10000
rdisp/max_comm_entries=2000
Sometimes, I still occur an error in Web Dynpro for Java. -
RfcException: message: CPIC-CALL: CMRCV on convId
Hi all
From Time to time I am getting this kind of error message within Portal...
application [webdynpro/dispatcher] Processing HTTP request to servlet [dispatcher] finished with error. The error is: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: CPIC-CALL: CMRCV on convId: 36456775
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR connection to partner '172.23.14.11:sapgw03' broken
TIME Thu Dec 13 10:24:35 2007
RELEASE 700
COMPONENT NI (network interface)
VERSION 38
RC -6
MODULE nixxi.cpp
LINE 3803
DETAIL NiIWrite
SYSTEM CALL writev
ERRNO 32
ERRNO TEXT Broken pipe
COUNTER 3
at com.sap.mw.jco.MiddlewareJRfc.generateJCoException(MiddlewareJRfc.java:455)
at com.sap.mw.jco.MiddlewareJRfc$Client.execute(MiddlewareJRfc.java:1442)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3979)
at com.sap.mw.jco.JCO$Client.execute(JCO.java:3416)
at com.sap.mw.jco.JCO$Repository.execute(JCO.java:20471)
at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20810)
at com.sap.mw.jco.JCO$Repository.queryFunctionInterface(JCO.java:20496)
at com.sap.mw.jco.JCO$Repository.getFunctionInterface(JCO.java:20600)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.RFCMetadataRepository.getJcoMetadataForFunction(RFCMetadataRepository.java:72)
at com.sap.tc.webdynpro.modelimpl.dynamicrfc.AiiModelClass.descriptor(AiiModelClass.java:220)
at com.qimonda.ep.qrisp.model.orderentry.resendorder.Zpmworfc_F_Resend_Ordchg_Input.<init>(Zpmworfc_F_Resend_Ordchg_Input.java:51)
at com.qimonda.ep.qrisp.ui.orderentry.OrderEntryWizard.resendOrderChange(OrderEntryWizard.java:4591)
at com.qimonda.ep.qrisp.ui.orderentry.wdp.InternalOrderEntryWizard.resendOrderChange(InternalOrderEntryWizard.java:2080)
at com.qimonda.ep.qrisp.ui.orderentry.ResendOrderData.onActionxmlOnly(ResendOrderData.java:192)
at com.qimonda.ep.qrisp.ui.orderentry.wdp.InternalResendOrderData.wdInvokeEventHandler(InternalResendOrderData.java:208)
at com.sap.tc.webdynpro.progmodel.generation.DelegatingView.invokeEventHandler(DelegatingView.java:87)
at com.sap.tc.webdynpro.progmodel.controller.Action.fire(Action.java:67)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.doHandleActionEvent(WindowPhaseModel.java:420)
at com.sap.tc.webdynpro.clientserver.window.WindowPhaseModel.processRequest(WindowPhaseModel.java:132)
at com.sap.tc.webdynpro.clientserver.window.WebDynproWindow.processRequest(WebDynproWindow.java:335)
at com.sap.tc.webdynpro.clientserver.cal.AbstractClient.executeTasks(AbstractClient.java:143)
at com.sap.tc.webdynpro.clientserver.session.ApplicationSession.doProcessing(ApplicationSession.java:313)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessingStandalone(ClientSession.java:759)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doApplicationProcessing(ClientSession.java:712)
at com.sap.tc.webdynpro.clientserver.session.ClientSession.doProcessing(ClientSession.java:261)
at com.sap.tc.webdynpro.clientserver.session.RequestManager.doProcessing(RequestManager.java:149)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doContent(DispatcherServlet.java:62)
at com.sap.tc.webdynpro.serverimpl.defaultimpl.DispatcherServlet.doPost(DispatcherServlet.java:53)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:387)
at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:365)
at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:944)
at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:266)
at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
at java.security.AccessController.doPrivileged(AccessController.java:207)
at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:100)
at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:170)
Can you please tell me what should be behind these errors???
Thanks a lot in advance
IvanHi Ivan,
I have same error, if you have resolved this problem? could you please tell me how to resolve this issue?
Thank a lot
Roger -
RFC_ERROR_SYSTEM_FAILURE - CPIC-CALL "CMRCV"
Hi everybody,
We are begining to use the versión BI 7.0 and when we want to save a query in the BEX QUERY DESIGNER, appear the following error:
RFC_ERROR_SYSTEM_FAILURE - CPIC-CALL "CMRCV"
LOCATION CPIC (TCP/IP) on local host
ERROR connection to partner 'xxx.xxx.xxx.xxx' broken
TIME
RELEASE 710
COMPONENT NI (Network Interface)
VERSION 39
RC -6
MODULE nixxi.cpp
LINE 4554
DETAIL Nilread
SYSTEM CALL recv
ERRNO 10054
ERRNO TEXT WSAECONNRESET: Connetion reset by peer
COUNTER 3...
I thank their help or comments.
Alberto MarchanHi Alberto,
CPIC is a type of user (Communication..) used for certain calls.
Has your BASIS team applied all the patches and related system settings?
SOrry, I do not remember the exact answer to the issue.
But I do remember that it is a system setup issue.
Good luck, BB -
Error when starting parser: timeout during allocate / CPIC-CALL:'TfSAPCMRC'
Hello experts.
When I try to preview or refresh a Crystal Report document built on a BEx query I get the following error msg:
Database connector error: BAPI Error #0. Error when starting parser: timeout during allocate / CPIC-CALL: 'TfSAPCMRCV'.
We have done as suggested in "SAP Note 1032461 - MDX parser does not start", but without success.
This is what we've tried so far:
replaced the file "librfc32.dll" (in C:\Windows\System32 and C:\Windows\SysWOW64) with the new version mentioned in Note 413708.
tested the connection in SM59 - non successful
tested the report query with transaction MDXTEST - non successful
tried to start the mdxparser manually on server - non succesful, error msg: "The application failed to initialise.."
We have the following config:
MS server 2003 SP2 x64 ed.
SAP logon 7.20
MS SQL server 2005
CR 2008
new librfc32.dll version 7200.1.39.6461
Any ideas on what to try next would be highly appreciated!
Cheers, IngAHi Ingo.
We have only one application server.
I registered the new version of the file C:\windows\SysWOW64\librfc32.dll with regsvr32.exe successfully. I've also tried to copy the new file to the same directory as the mdxsvr.exe-file is located, but it made no difference.
Should I remove all other copies of librfc32.dll and only keep the one in folder C:\Windows\SysWOW64, or maybe register them all with regsvr32.exe?
--IngA
Edited by: Ingeborg Andreassen on Nov 5, 2010 10:36 AM -
Sap to non sap connection ( program not registered/cpic-call
Hi all,
Im trying to connect sap to siebel system.IN TCP/IP connections iv selected register program id & passed the parameters ...program id,gateway host and gateway service
i followed michal krawczyk steps & also checked in smgw
transaction also but program id is not registered there
im getting error like program sapprog not registerd cpic/call
<b>Detailed error</b>
<b>Error</b> - program sapprog is not registsred
<b>location</b> - sap gateway on host saple / sapgw01
<b>detail</b> - Tp sapprog is not register
<b>component</b> - gateway
<b>counter</b> - 387
<b> module</b> -gwr3cpic
<b>line-</b> 1621
<b>return code</b> - 679
<b>subrc</b> - 0
please try to help me out in this issue. all inputs r rewarded.
Regards,
LavanyaHi
Thanks prince,iv checked entries in sm59, i checked smgw tranaction(gateway monitor) for logged on clients
its showing like this
number/luname/tpname/sys.type/hostname/hostaddres/last req
0 /sapnav/sapgw00/local_r3/sapnav.sapdomain.com/192.158.3.219
if i double click on above...
read/write socket = 4
handle = 4
time = tue jan 26 16:54:13 2006
socket = 1652
stat = ni_connected
type = stream ipv4
out = 1122 messages 64 bytes
in = 1 messages 64 bytes
local =127.0.0.1:3300
remote = 127.0.0.1:1848
options =
lu = sapnav
tp = sapgw00
lon lu = sapnav
long tp = sapgw00
ext program = 0
no conversation = 24
appc version = 6
hostaddr[0] =
hostaddr[1] = 127.0.0.1
offset in = 0
timeouts in = 0
connected = tue jan 24
last req = mon jan
request block number in= -1
connection out = -1
target out = -1
offset out = 0
restlen out = 0
timeouts out = 0
request block number out = -1
accept info = einfo
snc forced = 0
<b>just see gateway monitor 4 sapnav/parameters & attributes</b>Profile
parameter Value
gw/max_sleep 20
gw/conn_disconnect 900
gw/conn_pending 60
gw/gw_disconnect 1800
gw/req_stack_size 30
gw/max_conn 500
gw/max_wp 0
gw/max_conn_per_wp 10
gw/cpic_timeout 20
gw/deallocate_timeout 600
gw/reg_timeout 60
gw/reg_lb_level 1
gw/reg_lb_default 20
gw/side_info C:\usr\sap\D01\DVMGS00\data\sideinfo.DAT
gw/sec_info C:\usr\sap\D01\DVMGS00\data\secinfo.DAT
gw/startup C:\usr\sap\D01\DVMGS00\data\gwstartup.DAT
gw/stat 0
gw/tcp_security 1
gw/cpic_security 1
gw/max_sys 300
gw/max_shm_req 50
gw/max_shm_req_per_conn 10
gw/max_overflow_size 5000000
gw/max_overflow_usage 10
gw/keepalive 300
gw/reg_keepalive 300
gw/compatibility 0
gw/monitor 1
gw/netstat_once 1
gw/close_routes 120
gw/timeout 0
gw/internal_timeout 0
gw/nitrace 0
gw/accept_remote_trace_level 1
gw/resolve_timeout 0
rdisp/max_gateways 100
rdisp/max_comm_entries 500
rdisp/sna_gateway sapnav
rdisp/sna_gw_service sapgw00
rdisp/TRACE_LOGGING OFF
gw/rem_start REMOTE_SHELL
gw/remsh rsh
exe/gwrd C:\usr\sap\D01\SYS\exe\run\gwrd.EXE
snc/enable 0
snc/permit_insecure_start 0
Attributes
Release 640
Release no 6400
internal version 2
start time Tue Jan 24 16:53:47 2006
build time Aug 17 2004 23:33:51
build with Unicode TRUE
build with Threads TRUE
gateway hostname sapnav
gateway service sapgw00
req_sync_limit 24
appc_ca_blk_size 34396
gwreq_ln 34588
appcdata_ln 34316
overflow_size_limit 500000
overflow_use 0
trace level 1
trace level external programs 2
PID Gateway Reader 4952
internal version 2
Shared memory Sizes in bytes
CONN_TBL entry 1748
CONN_TBL total 874000
STATISTIC area 1392
iv changed some values for my safety.plz check it and let me know the error to register program id. Hope ull solve my issue this time.
Thanks in advance,
Lavanya. -
CPIC-CALL Transaction program not registered Error while creating RFC Desti
Hi All,
I am trying to create a new RFC Destination.
Details I have provided are..
1.RFC Destination Name
2.Connection Type - TCP/IP
3.Description
4. Activation Type - Registered Server Program.
5.Program Id.
6. Gateway Host and Gateway Service.
But When I Test the connection, I am getting the following error.
<b>" program xyz not registered / CPIC-CALL: 'ThSAPECMINIT'# Transaction program not registered"</b>
However I was able to create and connect RFC Destinations successfully previously.
I am not SAP guy. Could someone help resolve this issue.
Thanks,
Phanihi Sekhar,
I request you to please help me out in this issue. I am getting similar kind of problem. I am trying to replicate the customer from CRM to R/3 and i get a bdoc message in SMW01 that "RFC connection failed please press the save button again". When the basis team further investigated they came up with the below error..
User: CRREMOTE (Client: 071)
Destination: OCR (handle: 1, , )
Error RFCIO_ERROR_SYSERROR in abrfcpic.c : 1462
CPIC-CALL: 'ThSAPECMINIT'
Transaction program not registered
DEST =OCR
HOST =%%RFCSERVER%%
PROG =dpssrfc
Trace file opened at 20061121 140451 EST SAP-REL 640,0,109 RFC-VER
3 804778
resize I/O buffer to 28000 bytes
>>>> [2] MQ_LINK : TCP <ac: 3> K %%RFCSERVER%% >>> OPEN
{45632F14-288E-0046-0000-0000A888A7AA}-
======> CPIC-CALL: 'ThSAPECMINIT'
can you please tell me where can be probelm. Regarding your message, where can i get the communication channel to assign the program id.
Awaiting your reply,
Thanks & Regards,
Yogesh -
Hi,
We update the BW landscape for version 7.4 suppport package 4 (whitout HANA).
We use a external system connection to extract data from a SQLServer database (Microsoft Connector 1.1 for SAP/BW)
In the previous version (BW 7.0.1 SP 10) run correctly, but now is in error.
Below the BW error log:
Error: COMMUNICATION_FAILURE with function RSB_API_OHS_3RDPARTY_NOTIFY and target system SQLIS.
Error when opening an RFC connection (CPIC-CALL: 'ThSAPOCMINIT' : cmRc=2 thRc=679 Transaction program not regist).
Error log of Integrations Services
[SAP BI Destination 1 [476]] Error: Microsoft.SqlServer.Dts.SapBw.Connectivity.ERPException: An error occurred during the dispatch of the incoming function. The last return code was "RFC_FAILURE".
em Microsoft.SqlServer.Dts.SapBw.Components.SapBwSourceBWLoader.ProcessInput(Int32 inputID, PipelineBuffer buffer)
em Microsoft.SqlServer.Dts.Pipeline.ManagedComponentHost.HostProcessInput(IDTSManagedComponentWrapper100 wrapper, Int32 inputID, IDTSBuffer100 pDTSBuffer, IntPtr bufferWirePacket)
[SSIS.Pipeline] Error: SSIS Error Code DTS_E_PROCESSINPUTFAILED. The ProcessInput method on component "SAP BI Destination 1" (476) failed with error code 0x80131500 while processing input "SAP BI Destination Input" (491). The identified component returned an error from the ProcessInput method. The error is specific to the component, but the error is fatal and will cause the Data Flow task to stop running. There may be error messages posted before this with more information about the failure.
I checked the topic and notes below, but without success
CPIC Return Code 679 - Transaction Program not Registered - ABAP Connectivity - SCN Wiki
Note 1480644 - gw/acl_mode versus gw/reg_no_conn_info.
Note 353597 - Registering RFC server programs
Regards,
BrunoHi Bruno,
We were able to resolve the issue. SAP RDS is assisting us with our upgrade and one of their consultants gave us this fix/workaround.
Edit and add an entry into P:\usr\sap\<SID>\DVEBMGS00\data\reginfo.dat on your BW host server.
Below is the entry I added.
P TP=<NAME OF PROGRAM ID> HOST=<remote hostname where you creating the RFC to> CANCEL=<remote hostname> ACCESS=*
P TP=CTSAPNPSCI_PORTAL_FPS HOST=ctsapnpsci CANCEL=ctsapnpsci ACCESS=*
Then in BW system goto smgw > goto > Expert Funtions > External Security > ReRead ACL (N) & Globally
I hope that this works for you.
Regards
James -
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
I am having this error pop up very frequently on some new SAP systems. This will randomly happen and keep us from being able to release transports and import them in STMS. I receive the following error:
There was an attempt to start the transport control program tp using the local RFC interface.
An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
- When I check the Transport Tool (STMS: import queue> check> transport tool) I get the following information:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time
out during connection setup (check that partner exists
- When checking the TP System Log I receive the same error. The RSTPTEST report does not give any additional information. SM21 shows a warning and an error:
Warning:
Communication Error, CPIC return code 020, SAP Return code 456
Dialog Process No. 000
Problem cl: SAP web AS problem
Package: STSK
Further Details:
Module Name: thxxhead
Line: 7488
Error Text: 020456
Caller: ThRecei
Error:
Problem cl: transaction problem
Package: STTO
All of these errors are only pointing to a time out. I cannot figure out why this is happening. I checked the TMS RFC connection in SM59 and they are fine. I have been able to work around this issue in 2 different ways. First, I can delete the files in the "\trans\tmp" directory on the server. Sometimes this resolves the error. Else I have to restart the system.
I need to understand where this issue is coming from and how to resolve it. It is becoming more and more frequent. Thank you for your help!Hi,
i have had similar issues during this week. After looking for a solution everywhere i found out that i didn't set up the FQDN on this system.
Symptoms were:
se38 > RSTPTEST timed out sometimes(not always)
sm59 > TCP/IP connections > CALLTP_WindowsNT > test connections timed out sometimes (again, not always)
STMS Overview > Systems: I was not always able to distribute and activate configuration from the Domain controller via Extras > Distribute and Activate Configuration (it died on the mentioned system)
Transports failed mostly with the same error.
The error log was somewhere deep in ST11. It could not resolve our FQDN.
The solution, for me, was to add our FQDN to the WINDIR\System32\drivers\etc\hosts file.
We upgraded the kernel as well (from 7.20 patch 046 to most current) but this didn't help.
The FQDN is a concatenation of computer name and dns suffix of the network (if you have none, you can add one via rightclick on the used network adapter>ipv4>properties>Advanced>DNS tab, so in the end the host file looked like
127.0.0.1 localhost computer-name.ourSuffix.com
After this line has been added, the error stopped and the transports work again.
I hope it helps. Good luck. -
STMS distribution error - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hello All
i am trying to confugreu STMS but i am facing this error when i am tryin to distribute the same,
System EC2 Command TMS_PM_DISTRIBUTE_PROFILE
Client 000 Service tp Profile Service
User TMSADM Start Online
Date 20.10.2009 Function TMS_PS_WRITE_PROFILE_TO_DISK
Time 17:36:23 Message SET_CODEPAGE_FAILED
description : Could not start transport control program tp
detail error is as below if i press on more information
Could not start transport control program tp
Message no. TP608 Diagnosis
There was an attempt to start the transport control program tp using the local RFC interface. An error occurred here.
Error code: 4
RFC error text: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Meaning of the error codes:
03 RFC system failure
04 RFC communication failure
System Response
The function terminates. Details about the error can be found in the trace file of the Gateway Monitor (SMGW).
some of the posts on forum suggested i should try from same domain i tried but in vain, then i updated the SAP kernel from 7.01 sp 14 to sp 55. but i am still facing the problem.
i created this system recently using system copy based upon export image of a system (ABAP stack ) but using ABAP+Java during export process (by mistake). then we tried to build system using import (ABAP stack only i know its weird but its up and running). I assume we should have builf export imgae using ABAP method but some how due to lack of time we proceeded this way.
The main problem i see is TP RFC . The output from prgram RSTPTEST is as below
everythign is fine except below entries
under RFC destination
EFC ping - timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' : cmRc=20 thRc=456#Time out during connection setup (check that partner exists
under TP call
RFC link and Offline Call shws me the same error as RFC ping. and there is no output from tp version and DB connect.
Can anybody please help me on the same.
ManiHello All,
thanks a lot for you reply, i want to clear some point here
- I have no other physical attached to the system, i created other system as virtual system.
- to Sunny - i allready went through that thread and upgraded my Kernel also accordign to thread but problem still persist.
- to Anil .. i did as u said but nothing changed after that.
here is the log from trans log file
4 ETW000 r3trans.exe version 6.14 (release 701 - 12.06.09 - 15:20:00).
4 ETW000 unicode enabled version
4 ETW000 ===============================================
4 ETW000
4 ETW000 date&time : 20.10.2009 - 17:37:33
4 ETW000 control file: <no ctrlfile>
4 ETW000 R3trans was called as follows: r3trans.exe -d
4 ETW000 trace at level 2 opened for a given file pointer
4 ETW000 [dev trc ,00000] Tue Oct 20 17:37:37 2009 12584 0.012584
4 ETW000 [dev trc ,00000] db_con_init called 65 0.012649
4 ETW000 [dev trc ,00000] create_con (con_name=R/3) 401 0.013050
4 ETW000 [dbcon.c ,00000] *** ERROR => Invalid profile parameter dbms/type (or environment variable dbms_type) = <undef>, cannot load DB library
4 ETW000 160 0.013210
2EETW169 no connect possible: "connect failed with DBLI_RC_LOAD_LIB_FAILED."
i have dbms/type = mss in profile parameters
I am still getting the same error.
Mani -
Hello everyone,
while trying to execute an MDX Statement on NW 7s SAP BI i ran into the "timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'" error.
I searched these forums for a solution an found SAP Note 1032461.
The Problem is: it only applys to older versions of the NetWeaver. NW 7 seems to have a new RFC library.
Is there another solution for this problem in NW 7?I found the solution.
The note was right, but i used the wrong .dll. -
STMS error - Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Dear Experts,
We are facing issue in releasing or importing TRs.
1.When releasing TRs in DEV server, it is showing error message "Could not start control program TP" on status bar. But repeating the same process went successful.
2. While Importing TRs into QAS, at the time of refreshing queue/adjusting import queue, it pops-up error " timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' .But after repeating same process, TRs were impoted successfully.
We had performed the following in DEV & QAs:
1. Upgraded kernel to patch level 137.
2. After that replaced TP & R3trans with latest patch levels 169.
3. Re-configured STMS
4. Restarted Server.
Also checked,
(i). Report RSTPTEST in se38- sometimes successful; sometimes error :"timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (ii). RFC "CALLTP_WindowsNT" in sm59 Connection is OK.
Please help.
Thank you in advance.
RegardsHi,
Check below link if it helps:
Re: STMS
Pls also check below things :
- check that the "Gateway Options" are maintained in SM59 and the sapdp00/sapgw00 are maintained in the etc/services files. SAP Note 52959
- Please check SAP Note 773830 if you are on a cluster environment.
For the error regarding timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' please check SAP Notes 581509, 566566.
Thanks,
Rupali -
RFC error: timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#
Hi folks,
We experienced this error while trying to carry out transport into the Production Server- RFC error:timeout during allocate/CPIC-CALL: 'ThSAPCMRCV'#.
I have checked connection tests,RFC, they look fine.
Anyone experienced this before?
Thanks.hi,
please check :
SM59 > R/3 Connection > TMS Communication Interface generated --> is the connection OK ?
also check in :
STMS --> is the transport configured properly ?
rgds,
alfonsus guritno -
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshhi,
i have query data in BI report and that is released for external access. I want to show that data in frame of managment cockpit based on key figure and characterstic. Simple query(region wise sales) with one char, two keyfigures & one time char and created mesure also. I want to show data in column chart.
when i checked in frame, error log: system says:
Error: ODBO error
Details: Error occurred when starting the parser: timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
ours is bi7 system. issue not resolved ..pls suggest me steps to resolve this.
thanks,. -
Timeout during allocate / CPIC-CALL: 'ThSAPCMRCV' (managment cockpit)
Hi Friends,
I'm getting following error, while accesing BI query data in management cockpit.
ODBO Error:
timeout during allocate / CPIC-CALL: 'ThSAPCMRCV'
Pls suggest me steps to resolve issue.
thanks,
nareshNaresh,
Couple of suggestions...If this thread is still relevant....or please close this thread...
1) Make sure you are not having any issues with running the query, try running it directly in BEX/RSRT.
2)Once we know that there is no issue with teh query...try running the Trace on the user (ST05) to get further details on the error by trying to run it from management cockpit..
3) Check Note 1285242 - CPIC-CALL: 'ThSAPCMRCV' no data received.
Hope this helps..
Vishal.
Maybe you are looking for
-
I thought I would throw this question out there before I did anything drastic: Yesterday my AppleTV remote stopped working. No indication that it was a battery problem. Our iPhone remote apps still work. I bought a new battery. Still nothing. Like I
-
How to ENQUEUE to prevent using SE16 to change data?
Hi All, When we use SE16 to modify a database table record, a lock entry would be created in the SAP system (can be seen from SM12). From the Lock Entry List, we know that SE16 makes use of the enqueue function module ENQUEUE_E_TABLEE to lock the rec
-
SSIS 2012 - Use OPENROWSET in SSMS and SSIS
HI Experts , I am getting very much confused with 64 bit ,31 bit environment in SQL server, SSIS and MS office , Accessdatabase engine which I want to use for ETL as what should be the combination My scenario - I have written an SP with OPENrowset
-
Can distribution of a .java.policy file be eliminated
Sorry for the stupid question, but I'm fairly new to the realm of dealing with Java security... I have an applet that I want to deploy worldwide as part of an upgrade to an existing website, but I've run into the following error: "Error getting conne
-
Hi, How oracle olap cubes are different from oracle tables? regards chandra kanth.