JCO Error Message

Hi,
Background - We are trying to configure EP with SRM SUS. When we try to create a JCo connection, We are getting this error -
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=sapupd GROUP=SPACE R3NAME=SRM MSSERV=sapmsSRM PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsSRM' unknown TIME Wed Oct 10 14:58:03 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE niuxi.c LINE 1725 DETAIL NiPGetServByName2: service 'sapmsSRM' not found SYSTEM CALL getservbyname_r COUNTER 3
Any pointers will be of great help. BTW we are beginners in the EP domain

Did the addition to the services file, now I am getting the similar error..
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=sapupd GROUP=SPACE R3NAME=SRM MSSERV=sapmsSRM PCS=1 LOCATION CPIC (TCP/IP) on local host with Unicode ERROR service 'sapmsSRM' unknown TIME Wed Oct 10 15:27:51 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE niuxi.c LINE 1725 DETAIL NiPGetServByName2: service 'sapmsSRM' not found SYSTEM CALL getservbyname_r COUNTER 2
Only change is the counter which changed from 3 to 2.
Thanks.
Amol - 9900811660

Similar Messages

JCo error message (worked with older JCo version)

Hello,
In the past I successfully used the JCo 2.0.7.
Now I downloaded JCo 2.1.3 and replaced the librfc32.dll and sapjcorfc.dll in system32 with the DLLs from the new JCo distribution.
My Java test program now gives the error below:
My classpath is of course correct. If I reset my DLLs to the old versions, my test program works again.
Can you help?
Michael
java.lang.ExceptionInInitializerError: JCO.classInitialize(): Could not load middleware layer 'com.sap.mw.jco.rfc.MiddlewareRFC'
default_cpc_mode
     at com.sap.mw.jco.JCO.<clinit>(Unknown Source)
     at sap.idoc.JCoIDocSample1.main(JCoIDocSample1.java:32)
     at sun.reflect.NativeMethodAccessorImpl.invoke0(Native Method)
     at sun.reflect.NativeMethodAccessorImpl.invoke(NativeMethodAccessorImpl.java:39)
     at sun.reflect.DelegatingMethodAccessorImpl.invoke(DelegatingMethodAccessorImpl.java:25)
     at java.lang.reflect.Method.invoke(Method.java:324)
     at com.intellij.rt.execution.application.AppMain.main(AppMain.java:78)
Exception in thread "main"

Hi Michael,
Is it possible that the old JCo library files are in the path?
Michael

CUP 5.3 (SP9) Error message when creating a JCO Destination

Dear Experts,
When I try to create a new JCo Destination in Web Dynpro Content Administrator, I get the following error message and I cannot create a connection in CUP:
"com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed attempts"
Please give me some advice if you can.
Thanks,
HM

>Hi,
> "com.sap.mw.jco.JCO$Exception: (103) RFC_ERROR_LOGON_FAILURE: Password logon no longer possible - too many failed >attempts"
As you can clearly see that logs are stating that user you are entering in JCO destination to connect to backend system has wrong password.
Check the password of the user that you are entering in JCO destination.
Thanks
Sunny

RFC Connection error message while Debug the running WebDynpro app

Dear friends,
I am trying to debug WebDynpro application.
After configuring the NWDS with the J2EE server instance, I try to run the WebDynpro application, which I want to debug.
I did selecting the application and run after putting breakpoint at a button click.
But the webdynpro application uses 2 JCo destiantions, and so it gives JCOClientConnection for logical System: ... Please assure that you have configured the RFC connections and/or logical system name properly for this model! message.
If I run the same application from the portal, it doesn't give such error message.
Can anybody help me how can I run the WebDynpro application for debug purpose without getting this error message?
Thanks and regards,
Lakshmikanthaiah

Hi,
are you running the application on the same server? Or are you using the Debugmode on your local installation.
If so, you should check the JCO Destinations on you local server.
<a href="http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole">http://localhost:50000/webdynpro/dispatcher/sap.com/tcwdtools/WebDynproConsole</a>
Regards,
Dennis

Error message in "Bank Information" in German

Hi,
When a user enters a Standard Percentage value in an incorrect format in the "Bank Information" service of ESS in the portal, I am getting the error message in German instead of English.
The backend has the user set to EN.
Can someone help me in resolving this issue?
Regards
J

Hi Paddy,
JCO connections - language?
The language in the user?
In the iView the language properties - force English
Please check sap note 993423.
Hope this help.
Sónia
Check this note to: 1082994
Message was edited by:
Sonia Santos

Error message "com.sap.aii.af.ra.ms.api.DeliveryException: "

Hi Team,
Created a simple file2file scenarion successfully. Unable to pick the file from Sender directory to Receiver Directory.
Checked from monitoring the Communication Channel.
Error message shown for sender communication channel as below:
Communication Channel Status   Short Log                                Control Data   Party Service           Adapter Type Direction
sen_cc                 Red ball Processing Errors In the Last 30 Seconds Manually             kanchuf2f_sen_bs   File         Sender
Line 1 / 1
By selecting the sender communication channel "sen_cc", below is the node details given.
Processing Details for Cluster Node Server 0 1_54295
Type
Time Stamp         Message ID                           Explanation
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Retry interval started. Length: 60.0 seconds
12/3/08 8:20:01 AM 45f841be-a421-43bd-235a-c7ad19b0aec8 Error: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
By clicking on the first Message ID, The message says successful upto some point and give error says JCO COMMUNICATION FAILURE and RFC issue.
Below is the information provided in detail.
Audit Log for Message: 45f841be-a421-43bd-235a-c7ad19b0aec8
Time Stamp          Status Description
03.12.2008 08:20:00 Success Channel sen_cc: Send binary file "f:\xi_file\sender\f2fmap.xml". Size 210 with QoS BE
03.12.2008 08:20:00 Success Application attempting to send an XI message synchronously using connection AFW.
03.12.2008 08:20:00 Success Trying to put the message into the call queue.
03.12.2008 08:20:00 Success Message successfully put into the queue.
03.12.2008 08:20:00 Success The message was successfully retrieved from the call queue.
03.12.2008 08:20:00 Success The message status set to DLNG.
03.12.2008 08:20:01 Error Returning synchronous error notification to calling application: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error Transmitting the message using connection http://sitaserv33:8001/sap/xi/engine?type=entry failed, due to: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:.
03.12.2008 08:20:01 Error The message status set to FAIL.
03.12.2008 08:20:01 Error Returning to application. Exception: com.sap.aii.af.ra.ms.api.DeliveryException: XIServer:JCO_COMMUNICATION_FAILURE:
Page 1 / 2
I think this could be the problem with some basis related settings, I am not sure what exactly the issue with.
Any idea what exactly the error is talking about please do help me in finding the solution to thresolve this error message.
Regards,
Venkat Ramana K

Hi Carlos,
Thank you for the quick information.
Followed all the steps and also basis person from onsite restarted the XI server.
Now, I am able to log onto XI with the login Id but, when I give Tr Code: SXMB_IFR, unable to open the browser that shows Integration Builder.
Getting the error message.
*500   Internal Server Error*
                                                                                *SAP J2EE Engine/7.00*
**Exception**
*An internal error occurred. Contact you XI administrator*
*Unable to read configuration data (ExchangeProfile/aii.properties)*
Error Details, Error History, Build Info, Generic Application Info
Regards,
Venkat Ramana K

Error while deploying the aplication-jco error

Hello Experts,
i know   thousends of questions in jco error. I have followed that threads , still i am getting an error.
Plz help me out from that error.
My EP server is running on was 6.20,
and xi server is running on was 6.40.
what i have done:
I have downloaded fightslist application from sdn.
i have deployed that application to was 6.40.
i created one technical system for abap.
i configured sld.
i entered service name(sapms147 3600/tcp(this is ides(4.7) serversid and port)) in servicefile in was 6.40 machine.
when maintaing jco connections the following error has come:
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=mlbpsap06 GROUP=PUBLIC R3NAME=I47 MSSERV=sapmsI47 PCS=1 LOCATION    CPIC (TCP/IP) on local host with Unicode ERROR       service 'sapmsI47' unknown TIME        Fri Dec 01 15:27:10 2006 RELEASE     640 COMPONENT   NI (network interface) VERSION     37 RC          -3 MODULE      ninti.c LINE        494 DETAIL      NiPGetServByName2: service 'sapmsI47' not found SYSTEM CALL getservbyname_r COUNTER     7
My doubts are:
1.where i have to enter service i.e which machine (6.40 or 4.7 machine).
2.while creating technicalsystem which product i have to choose).
3while creating jco connection
    whichone i have to choose either dictinory mata data or applicationdata.
    in message server connection which user id & password i have to give means 4.7 userid or xiserver userid & password.
Plz helpme out from this.
Thanks in advance.

Hello Sai,
NWDS is local means which machine i am using.
My EP 6.0 SP2 in 172....202 but it is reunning on was 6.20.(mlbpsap02)
and here was 6.40 ip is 172.....203 IP ,but XI is installed on this server)(mlbpsap03)
and R/3 ECC ip is 172......201.(mlbpsap01)
no sneak preview edition and all.
I have downloaded application(sample flight) in webdynpro.
and i configured sld in 203(cim test connection is successfull) ip.and also entered the service name(sapmsecc 3600/tcp).After entering the service name i restarted the server
and created technical system for abap (and here selectiong products ecc components are not there.)
in webdynpro content admin while maintaing jco , the above error is coming.
i am unable to find where the problem is
the main thing is ep is not in was 6.40
further what i do
and where i enter the host ip and aliases.

Jco: Error Connecting using sapgw04

Hi,
I have a problem using Jco to connect to a SAP-System.
I'm trying to connect to SAP using the following configuartions:
     sysnr:           04
     GWServ:      sapgw00
     GWHost:      XXX.YYY.com
     ASHost:      XXX.YYY.com
The code to create a repository for this configuration is:
     JCO.addClientPool(poolname, maxpoolsize, "538", "username", "password", "DE",
               "XXX.YYY.com", "04", "XXX.YYY.com", "sapgw00");
When I use this pool to get a function I get an Exception:
com.sap.mw.jco.JCO$Exception: (123) JCO_ERROR_FUNCTION_NOT_FOUND: Server repository could not create function template '[FUNCTIONNAME]'
caused by: com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect from SAP gateway to RFC server failed
Connect_PM
     GWHOST=XXX.YYY.com , GWSERV=sapgw00, ASHOST=XXX.YYY.com , SYSNR=04
LOCATION
     SAP-Gateway on host h33e / sapgw00
ERROR       partner not reached
     (host XXX.YYY.com , service <b>sapgw04</b>)
The strange thing is the sapgw04 in the error-message.
Somehow JCO wants to use sapgw04 to connect to the RFC-Server. Is this an error in the SAP-Configuration or do I have to change the configuration of Jco?
How can I tell Jco not to use sapgw04 but sapgw00?
Any help would be appreciated!
Thanks
Torsten

Hi Torsten,
please check how you log on to your system. You are giving a system number 04, which corresponds to sapgw04. I'm not sure why the method needs all the information, seems to be duplicate to me (please comment if I'm wrong); it should be sufficient to use:
addClientPool(String key,
   int max_connections,
   String client,
   String user,
   String passwd,
   String lang,
   String ashost,
   String sysnr)
If you don't want to use sapgw04, just specify "00" for the sysnr.
Hope this helps, harald

JCo error while viewing MSS iviews

Dear SDN Community,
When I am trying to view any of the MSS iViews like photo, orgchart, personal data, I get the following error message.
com.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server host failed Connect_PM TYPE=B MSHOST=sapdev GROUP=ED0LG R3NAME=ED0 MSSERV=sapmsED0 PCS=1 ERROR service 'sapmsED0' unknown TIME Fri Aug 03 11:59:07 2007 RELEASE 700 COMPONENT NI (network interface) VERSION 38 RC -3 MODULE nixxhsl.cpp LINE 776 DETAIL NiHsLGetServNo: service name cached as unknown COUNTER 4
The JCo connections SAP_R3_HumanResources and SAP_R3_HumanResources_Metadata are tested successfully and I see the gree light for these 2 in the WebDynpro console.
Can you please advice me here.
Thanks,
Vivek.

Vivek,
open the services file of your portal server box. This file will be in the location C:\WINDOWS or WINNT\system32\drivers\etc folder. In that enter an entry as below:
sapmsED0 36XX/tcp
where XX is the system no of your R/3 system. So if R/3 system number is 30 the line would be sapmsED0 3630/tcp.
Save the file and then try accessing iView again. This error message would be going off.
Regards,
Shubhadip

Error message com.sap.aii.af.ra.ms.api.DeliveryException: error while proce

hello experts
I am sending a message WS2RFC and recieve an error message that return from the RFC.
<?xml version="1.0" encoding="UTF-8" standalone="yes" ?>
- 
- <SAP:Error xmlns:SAP="http://sap.com/xi/XI/Message/30" xmlns:SOAP="http://schemas.xmlsoap.org/soap/envelope/" SOAP:mustUnderstand="1">
<SAP:Category>XIAdapterFramework</SAP:Category>
<SAP:Code area="MESSAGE">GENERAL</SAP:Code>
<SAP:P1 />
<SAP:P2 />
<SAP:P3 />
<SAP:P4 />
<SAP:AdditionalText>com.sap.aii.af.ra.ms.api.DeliveryException: error while processing the request to rfc-client: com.sap.aii.af.rfc.afcommunication.RfcAFWException: error while processing message to remote system:com.sap.aii.af.rfc.core.client.RfcClientException: could not convert request from XML to RFC:com.sap.mw.jco.JCO$ConversionException: (122) JCO_ERROR_CONVERSION: Date '03042008' has a wrong format at field DATUM: Unparseable date: "03042008"</SAP:AdditionalText>
<SAP:ApplicationFaultMessage namespace="" />
<SAP:Stack />
<SAP:Retry>M</SAP:Retry>
</SAP:Error>
any ideas what it is and how to solve it?

Hi,
Looks like you have passed data in wrong format to RFC input parameter.
Your format: DDMMYYYY (03042008)
Expected: YYYYMMDD
I would use a graphical mapping function "DataTrans" to convert date format from DDMMYYYY to YYYYMMDD.
Regards,
Jakub

Displaying BEx Error Messages in WebI

Hi
Is it possible to have the BEx error messages displayed in a WebI Report?
We have various scenarios where an error message is returned from customer exit variables, which is displayed nicely in the browser if the BEx query is executed, but is not shown at all when the same query is run in a WebI document.
Is there a way to get this done?
Cheers,
Andrew

Hi Andrew,
a very good suggestion of course, but sadly missing from the XI3.1 integration scenario.
My understanding is that the BW OLAP BAPI (as used externally by WebI, via MDX universes) does not surface these error messages natively .. so this warning isn't sent to the front-end
To some extent, this problem also remains in BI4.0 where the JCo error-handling still isn't fully captured between APS DSL Bridge and the BW BICS API . (unless low level tracing is enabled)
would be interesting to know what tips might be out there in the ecosystem, but i haven't seen any match winners to date.
Regards,
H

JCo error when calling from webmethods sap adapter to SAP BAPI

Hi,
I am getting an error "[SAP.102.9000] JCo error: (104) RFC_ERROR_SYSTEM_FAILURE - connection closed without message (CM_NO_DATA_RECEIVED)" when webmethods sap adapter is calling BAPI in SAP. The BAPI is working fine in SAP.
Can anyone suggest me a possible solution.
Thanks,
Sarath.

BAPI-step by step procedure
http://www.sapgenie.com/abap/bapi/example.htm
list of all BAPI's
http://www.planetsap.com/LIST_ALL_BAPIs.htm

Error Message Prompt when test connection

Hi All,
In order to setup the B1i Integration for SAP 2005A PL46,i had install the following program:
a) j2sdk-1-4-2
b) j2re-1-4-2
c) sqljdbc_1.2.2828.100_enu.exe
d) Tomcat apache 5.0.30
After install the above program, i used eventSender to setup & test the connection to B1iServer. The connection was successfully.
When i try to login the administration --> Landscape
Click the 'test connection' for the database, the following message display.
Connected to database_name failed.
"com.sap.b1i.xcellerator.XcelleratorException: XCE018 IPO-Step is missing in IPO-Step URI ipostep:/0010000101.outbound/ipo.com.sap.b1i/P08/P08.ipo/#Xs() "
Any advise for the message?I had try reinstall the program. The same error message appear again. Anybody who know what happen? Thanks.
Regards,
Eric Tan

Hi Eddy,
Yes,i had been install Client DI API for PL46. The path JCO path as "C:\Program Files\SAP\SAP Business One DI API\JCO\LIB". There have 4 four files insides included as below:
a)sboapi.jar
b)sbowrapper.jar
c)sbojni.dll
d)sbojc.sda
The JCO path in the landscape setup for B1 is correct as well. Any other reason?
Regards,
Eric Tan

CreateStrategyR3 and ReadStrategyR3 Customized Error Message

Hi
We want to display customize error message for the function module SD_SALESDOCUMENT_CREATE.
the function returns a return structure that has error codes like V1-117, V1-118 etc
We want to display the customized error message for this code
so we have made the changes in CreateStrategyR3 and ReadStrategyR3
as well as we have placed the customized message in the property file
but I still cant see customized error message i can see the std error message of SAP
Can anyone help me out with this
Regards
JM

Hi ,
Does this approach work for the version 7.0 also?
I have made changes to ReadStrategyR3, OrderR3, backendobject-config.xml and overriden replaceR3MessageTexts.
public boolean replaceR3MessageTexts(JCO.Record messageRecord, StringBuffer messageId, StringBuffer text){
super.replaceR3MessageTexts( messageRecord , messageId, text); is the way i am trying to override it.
Still the standard message is getting displayed.
I am trying to capture message V1/150.
Please help.
Best regards,
Rohit Sharma

RFC_ERROR_COMMUNICATION Error message.

Problem: E-commerce applications went down due to some errors.
Below is the Error message from Log:
Message seen in log: Error message is: Group Internet not found. RFC error connecting to message server host failed. NWD2CRM3 server. Weve seen this 9/11/06; 1/16/08(day of Prod patches); 2/25/2008 Seems like a problem with the J2E layer talking to the CRM layer. We see this error when the J2E layer is trying to talk to the CRM/Unix back end and cannot. Seems as though the Web servers (eComm front end) were up and OK, backend CRM / UNIX box was fine, just the J2E layer unable to speak with CRM layer.
Root Cause and resolution : At this point in time we are unable to determine the exact cause of the problem.
Resolution was to shutdown all the connected servers and bring them back up in a sequential order.
Below is the error message that occured:
RfcException:
     message: Connect to message server host failed Connect_PM TYPE=B MSHOST=nwd2crm3.corp.analog.com GROUP=Internet R3NAME=PC1 MSSERV=sapmsPC1 PCS=1
LOCATION CPIC (TCP/IP) on local host with Unicode
ERROR     Group Internet not found
TIME      Mon Feb 25 13:41:03 2008
RELEASE   640
COMPONENT LG
VERSION   5
RC        -6
MODULE    lgxx.c
LINE      3526
DETAIL    LgIGroup
COUNTER   12
     Return code: RFC_FAILURE(1)
     error group: 102
     key: RFC_ERROR_COMMUNICATION
If any one has come across such an error please give the resolution for the same.

Hi Bhavik,
I am facing this problem.
I want to try ur suggested option. But in the JCO connection parameter list, where do i need provide this values.
I am providing below parameters for connection:
client=800
user=isauser
passwd=...
lang=EN
mshost=IP address
r3name=P01
group=Sales/Purchasing
For the above parameters i am getting below error when i try to run my program
om.sap.mw.jco.JCO$Exception: (102) RFC_ERROR_COMMUNICATION: Connect to message server failed
Connect_PM MSHOST=<IP address>, R3NAME=P01, GROUP=Sales/Purchasing
LOCATION    CPIC (TCP/IP) on local host
ERROR       service 'sapmsP01' unknown
Please reply me
Thanks and regards
Lakshmikanthaiah

JCO Error Message

Similar Messages

Maybe you are looking for