JDBC Adapter Communication Channel error

I am getting this error for a JDBC Adapter, I waondering if anybody could point me in the right direction.
I have installed the driver:
JDBC Driver: oracle.jdbc.driver.OracleDriver
Connection: jdbc:oracle:thin:@146.146.78.74:1521:ts1
Error:
Error when attempting to get processing resources: com.sap.aii.af.service.util.concurrent.ResourcePoolException: Unable to create new pooled resource: DriverManagerException: Cannot establish connection to URL 'jdbc:oracle:thin:@146.146.78.74:1521:ts1': SQLException: Io exception: The Network Adapter could not establish the connection
Any help would be appreciated.

The driver has been deployed into the XI server, I just deployed the testing tool from OSS note 1085539.
I am still getting this error.
Exception Occurred : Io exception: The Network Adapter could not establish the connection
Exception Stack Trace : java.sql.SQLException: Io exception: The Network Adapter could not establish the connection
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:112)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:146)
     at oracle.jdbc.driver.DatabaseError.throwSqlException(DatabaseError.java:255)
     at oracle.jdbc.driver.T4CConnection.logon(T4CConnection.java:387)
     at oracle.jdbc.driver.PhysicalConnection.(PhysicalConnection.java:420)
     at oracle.jdbc.driver.T4CConnection.(T4CConnection.java:165)
     at oracle.jdbc.driver.T4CDriverExtension.getConnection(T4CDriverExtension.java:35)
     at oracle.jdbc.driver.OracleDriver.connect(OracleDriver.java:801)
     at java.sql.DriverManager.getConnection(DriverManager.java:559)
     at java.sql.DriverManager.getConnection(DriverManager.java:189)
     at com.sap.util.TestJDBCUtil.testDriverManagerConnect(TestJDBCUtil.java:52)
     at com.sap.tests.TestJDBCConnectionServlet.processRequest(TestJDBCConnectionServlet.java:41)
     at com.sap.tests.TestJDBCConnectionServlet.doPost(TestJDBCConnectionServlet.java:74)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:760)
     at javax.servlet.http.HttpServlet.service(HttpServlet.java:853)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.runServlet(HttpHandlerImpl.java:401)
     at com.sap.engine.services.servlets_jsp.server.HttpHandlerImpl.handleRequest(HttpHandlerImpl.java:266)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:386)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.startServlet(RequestAnalizer.java:364)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.invokeWebContainer(RequestAnalizer.java:1039)
     at com.sap.engine.services.httpserver.server.RequestAnalizer.handle(RequestAnalizer.java:265)
     at com.sap.engine.services.httpserver.server.Client.handle(Client.java:95)
     at com.sap.engine.services.httpserver.server.Processor.request(Processor.java:175)
     at com.sap.engine.core.service630.context.cluster.session.ApplicationSessionMessageListener.process(ApplicationSessionMessageListener.java:33)
     at com.sap.engine.core.cluster.impl6.session.MessageRunner.run(MessageRunner.java:41)
     at com.sap.engine.core.thread.impl3.ActionObject.run(ActionObject.java:37)
     at java.security.AccessController.doPrivileged(AccessController.java:215)
     at com.sap.engine.core.thread.impl3.SingleThread.execute(SingleThread.java:102)
     at com.sap.engine.core.thread.impl3.SingleThread.run(SingleThread.java:172)
Any suggestions?

Similar Messages

Regarding the JDBC Receiver Communication Channel error

Hi All,
While executing Jdbc to Jdbc interface, i am getting error in jdbc receiver communication channel. please see below message for error description..
Message processing failed. Cause: com.sap.aii.af.ra.ms.api.RecoverableException: Channel 'JDBC_AccntStatements_Receiver', Service 'BS_BusinessSystem', Party '': JDBC Adapter configuration not activated
Note: the channel status is active and activated(not in change mode).
Any idea on this error.
thanks,
Madhusudhan.

Hi
According to your Error Message,
Saying that JDBC Configuration is not Active.
Once again cross check all the config is Activated & also Test your Config Using Config Test Tool in ID
And also check in RWB-Adapter Engine-Adapter monitoring ---select the option instaled & Started. whether the JDBC Adapter is working fine or not

JDBC to JDBC Scenario - Communications Channel Error

I am following the published JDBC to JDBC Scenario:
https://www.sdn.sap.com/irj/sdn/wiki?path=/display/xi/step-by-step+guides
I am a 3rd Party Vendor, and I'm using NX7: SAP Exchange Infrastructure. My goal is to have a JDBC Sender that sends MS Access data from my PC to NX7, and have a JDBC Receiver that receives MS Access data, and map the data from one database to the other via XI per the scenario, with both databases on my PC.
I set up the NX7 SAP XI per the scenario, but I'm getting an error on the NX7 Communications Channel:
Error during database connection to the database URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb' using the JDBC driver 'sun.jdbc.odbc.JdbcOdbcDriver': 'com.sap.aii.adapter.jdbc.sql.DriverManagerException: Cannot establish connection to URL 'jdbc:odbc:Driver={Microsoft Access Driver(.mdb)};DBQ=//204.245.44.232/C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb': SQLException: [Microsoft][ODBC Driver Manager] Data source name not found and no default driver specified'
The data source is in
C:/Documents and Settings/All Users/Documents/XI_FILES/SENDER/STUDENT_Database.mdb on my PC and it is a shared folder. My PC IP 204.245.44.232 is a public IP address. It should be using the JDBC-ODBC bridge driver in the JDK.
Why am I getting the error?
Thanks,
Ed Culnane

Hi
Connection Parameters are of given below check
Transport Protocol: JDBC 2.0
Message Protocol: XML SQL Format
Adapter Engine: Integration Server
JDBC Driver: jdbc.odbc.JdbcOdbcDriver
Connection: jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb
5) In my case there is no userid and password required, but if you have userid and password, then the parameter for Connection becomes,
jdbc:odbc:Driver={Microsoft Access Driver (*.mdb)};DBQ=//xiserver/xitemp/db/TestDB.mdb;Uid=yourid;Pwd=yourpwd;
Well ms access file should be in the XI Server path or it should be able to accessed by the XI
Try this above option of keeping u r file in the XI Server path instead of the local
rgd
srini

ALERT MAIL FOR FILE ADAPTER COMMUNICATION CHANNEL ERRORS

Hi,
I need to send an alert by mail to a list of configured receivers if any error( Application as wel as System Errors ) occurs in the FILE ADAPTER Communication Channel .
Please suggest how to do it......
Regards,
Sriparna

Can anything be configured in the communication channel to run a mail unix script if the communication channel is throwing
error.Other than alert rule can we configure this.
Why do you intend to use script? Define Alert....create Rule....set parameters using SCOT.....you will get the alert as email (if you need it)
Can you please help with how do I create this rule specific to File Adapters only ?
Other than selecting FILE as Adapter Type in RWB --> Alert Rule definition we dont do anything special....this setting should help.
Regards,
Abhishek.

JDBC Receiver Communication channel Error

Hi Friends,
I am facing below error in JDBC Receiver Communication chnnel.
Please shared your views.
Message processing failed. Cause: com.sap.engine.interfaces.messaging.api.exception.MessagingException: Error processing request in sax parser: Error when executing statement for table/stored proc. 'KRSAPJOB' (structure 'Statements'): java.sql.SQLException: [SQL0204] KRSAPJOB in KRONOSMF type *FILE not found.
thanks
Mohit

Hi Mohit,
I received a smiliar error with the receiving JDBC Communication channel. Please talk with your database Admin regarding the stored procedure.
Either one of the fileds in the database is Mandatory and you are not sending that field valiue OR
the data type for one of the fields definied is not matching the one in the database and the stored procedure is failing and throwing an exception.
Teresa

Sender Soap Adapter communication channel error

Dear Experts,
When i see Sender soap adapter status in Communication channel monitoring.I am getting the status as:
"Processing Errors in the Last 50 Minutes"
Thanx in advance

Aamir,
My other interface is working fine by giving the following url:
http://kpmgvm015:8001/XISOAPAdapter/MessageServlet?channel=:KPMG_AU_ALL:RetrieveOpportunityRecord_SOAP_Sender
I am not using the propsed url.
Moreover when i try to give this url in the browser . It is asking of user id and password.
I am giving user as : PIAPPLUSER.It gives message servelet is ok.
In my communication channel monitoring the corresponsing communication channel:
RetrieveclientRecord_SOAP_Sender is in Red - Processing Errors In the Last 40 Minutes
Error meesage in Webclient:
java.security.AccessControlException: PIAPPLUSER has no permission for accessing binding com.sap.aii.af.service.cpa.Binding@d046043a

Testing the JDBC adapter communication channel

Hi
I've created an interface which gets the sender payload using a JDBC adapter.
Basis have installed the JDBC driver for the database where the data resides
I've configured the communication channel to poll every 10 minutes
So far nothing appears to be happening
Can I test the communication channel independantly?
Is there a procedure to make the communication channel active?
Is there an admin area where I can see if there is an issue with the communication channel.
I've checked SMQ1, SMQ2 and SXMB_MONI and there are no messages
I've also checked runtime workbench => adapter monitoring => communication channels but I get an empty list
all help will be very much appreciated

Hi Geoff,
It is not possible to check only the communication channel but we can check the complete scenario confogured in Integration Directory.
1. Open ID.
2. Goto Tools.
3. Provide the sender and the receiver parameters.
4. Also provide the payload in the Payload section.
5. Now, goto Test Configuration
6. Select Run.
This shows you, if there are any issues in the configuration.
Thanks,

JDBC Sender Communication Channel Error

Hi,
We are facing the below error in Sender JDBC communication channels:
The JDBC driver returned the following error message: 'java.sql.SQLException: [Microsoft][SQLServer 2000 Driver for JDBC]No ResultSet set was produced.'
We are getting this error in channels which are using stored procedures but not in channels using direct sql query statements.
The database is not having any data currently.
So is the above error because of no data or some other issue?
Any ideas?
I have searched the sdn but didnt find anything appropriate.so posting a new thread.
Thanks,
Anu.

Can you try again after filling in few records in the DB? I am suspecting the way SP has been written ... check if it is required to return value from SP?

Receiver JMS Adapter Communication channel Error

Hi Experts,
The Error is given below
Cannot connect because class 'com.ibm.mq.jms.MQQueueConnectionFactory' is missing: ensure that JMS Provider library 'aii_af_jmsproviderlib.sda' contains all required resources.
when i searched SDN , i found the MQ JMS Library need to deployed in XI/PI . For clarification check SAP NOTE 1138877 is given .
What should I do ?
pls advice
Regards,
Jude

Hello Experts,
I am encountering the same error that you faced. I am using PI 7.0 and MQ adapter 6.0. I would like to know where to get the following jar files:
CL3Export.jar
CL3Nonexport.jar
com.ibm.mq.jar
com.ibm.mqjms.jar
connector.jar
dhbcore.jar
rmm.jar
I know that I am supposed to add the above files to aii_af_jmsproviderlib.sda on the PI server. As I not a basis person, it'll be great if you could direct me to some detailed instructions. I am trying to follow SAPNote: 747601.
Please correct me if I am wrong.
Thanks,
Bhanu.

Error in Recever Mail Adapter (Communication Channel)

Hello Experts,
I am getting below error in recever Adapter Communication Channel. I have given SMTP, XIALL,PLAIN parameters, i have given proper: SMTP://compnay.com & correct user id and password, i browse throug all most all related links.
Exception caught by adapter framework: java.io.IOException: server does not support PLAIN or LOGIN authentication
Mail: error occured: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server does not support PLAIN or LOGIN authentication
Delivery of the message to the application using connection Mail_http://sap.com/xi/XI/System failed, due to: com.sap.aii.af.ra.ms.api.RecoverableException: java.io.IOException: server does not support PLAIN or LOGIN authentication.
Thanks,
Siva

HI Siva
Are you trying to send Email from any file send by system or Read by PI and send as Email.
Please describe your Scenario.
If your email is generated from the content provided by Integraton engine use Message protocol XI PAYLOAD instead of XIALL.
Using Authentication you change from Plain to CRAM-MD5. then it might not give any error
Your URL should be SMTP://mailhost.company.com
For reference check Help URL
http://help.sap.com/saphelp_nw04/helpdata/en/23/c093409c663228e10000000a1550b0/frameset.htm
Thanks
Gaurav Bhargava

XI Communication Channel Error Explanation

Hi All,
Does anyone happen to know :-
1) Is it possible to use CCMS to email the errors coming from a communication channel error Explanation field
2) Are these messages stored in a table I can check
The reason I need to know this is because we sometimes encounter an error such as "Conversion of file content to XML failed at position 838: java.lang.Exception: ERROR converting document line no. 839 according to structure 'XXX_XXX_XXX':java.lang.Exception: ERROR in configuration / structure 'XXX_XXX_XXX.': More elements in file csv structure than field names specified!
This tells us exactly where the error occurred but using Communication Channel Monitoring the error message only remains for a little while before the polling messages remove it from the display. Since the process runs early hours of the morning we never get to see these messages.
Any help appreciated.
Thanks
Craig

Hi Raquel,
Let me try to clear out some things in this thread . First of all you do your alert configuration which you say you have already done. Thats good . Now you ask that you want only to monitor the communication channels and you want specific guide . Here is the specific guide.
If you have configured alerts you will know that when you create an alert rule you have the option to choose radio button where did the error occur it could be no restriction , integration engine or adapter engine. You need to choose adapter engine.
Now whenever the colour of the lights change to red. You will get your alerts.
Regards
joel
Edited by: joel trinidade on Apr 9, 2009 9:41 AM

Issue on file sender adapter communication channel

Hi All,
I have an issue on some of the file sender adapter communication channels .The channels are failing with the error :
(u201CAttempt to process file failed with com.sap.engine.interfaces.messaging.api.exception.MessagingException: com.sap.xi.swift.ParserException: com.sap.xi.swift.ParserException: Message does not start with character '0x1f'u201D).
Please let me know the procedure to get this message processed.
Thanks & Rgards
Vishnu

Hi Vishu,
Find out in what encoding the file is in. for that download Notepad++ and open the file with in.
In Encoding tab you will see the encoding format.
1. If its not UTF-8 or ANSI then you should set the correct encoding in Sender File channel.
2. Check for BOM characters which will not be visible directoly.
3. Use Notepad++ to convert the content to HEX and check for hidden values. i bet there will be some Encoding BOM in the file which is creating problem while picking the file.
Since you are using SWIFT module: try to validate the XML file using Altova XML and check weather is correct.
also ref to this thread:http://scn.sap.com/thread/2134946
Regards,
Senthilprakash

Getting end-of-file on communication channel error on this query

Hi guys,
I'm getting the end-of-file on communcation channel error when running the following query in SQL PLUS, If run it in a stored procedure called through code of JDBC, it gave "no more data to read from socket" error. Any idea what went wrong? kind of frustrated now. We are using the Oralce 9.0.1.4.0, which suppose to fix some sdo_uion and sdo_buffer bugs. Thanks a lot!!
select SDO_GEOM.SDO_BUFFER((SELECT SDO_AGGR_UNION(MDSYS.SDOAGGRTYPE(GEOLOC, 0.011119487)) FROM GEOTEL_SOURCE where MSA='5000' and COMPANY_NAME ='AMERICAN FIBER SYSTEMS'),1.0,5,'unit=MILE arc_tolerance=0.05') from GEOTEL_SOURCE a where a.MI_PRINX = 1;

Hi Daniel,
Just tried the 9.2.0.2 patch, seems to work better now. At least I don't get the end-of-file on communication channel error. But how about the speed thing? I isolated the problem, and find out that sdo_aggr_union is taking too long to finish( 1 Hour!!! for 2300 lines with the same city. Any clue to optimize it, I tried some hint like /*+ordered*/ No_Merge and something like that, does not improve though. Thanks!

Sender Communication Channel Error

Hi all,
iam working on JDBC scenario.For this iam using party and business service.
iam getting following error at jdbc sender communication channel.
Error occurred while sending message: com.sap.aii.af.ra.ms.api.ConfigException: SLDAccess set to true, but not available.
Erlier it worked fine.But now iam getting this problem.
We are having some other channels which r working fine.
any ideas......?
Thanks,
Sreedhar Goud.

1. If you know the user, who having admin rights;
1.Open the VA tool; ex: C:\usr\sap\X67\JC01\j2ee\admin --> click on "go.bat"
2. Click on "New" button ( this is on Logon Dialog box)
3. Enter "Display name"; and select "Direct Connection To a Dispatcher Node".
4. Say "Next"
5. Enter "User Name","Host" and "Port" and Save the data.
6. Select User and click on "Connect"
2. Did you forget the J2EE_ADMIN password? Just follow below steps:
Just follow below steps:
1.Start the Config Tool C:\usr\sap\<SID>\<engine-instance>\j2ee\configtool\configtool.bat
Ex: D:\usr\sap\F02\JC00\j2ee\configtool --> configtool.bat
2. "Switch to configuration mode" for that Click on "Pencil" icon;
3. Click on "Pencil" icon means "Swith to Configuration Edit mode" then say "YES"
4. cluster_data --> server --> cfg --> services -->
click on "Propertysheet com.sap.security.core.ume.service
select properties:
ume.superadmin.activated = True
ume.superadmin.password = <enter password >
then say "OK"
Click on "Pencial ICON.
5. Save & restart Java Engine.
Login with "Administrator"
1. http://<host>:<Port>/useradmin/index.jsp
2. Enter userid / Password as "Administrator / <password>
3. it will ask change password just change it.
Please follow steps one by one. it should resolve your issue.

RFC , IDoc , XI and JDBC receiver communication channel--- Good Design

Hi Experts,
We have developed around 60+ interfaces on PI7.1 EHP1, in that 20 interfaces sending data to Data Base using JDBC receiver communication channel, 15 interfaces ABAP inbound proxy using XI adapter,10 Scenarios using IDoc receiver channel and 15 scenarios using RFC receiver channel.
But I have created only one IDoc, XI , JDBC and RFC channel.
Is it right idea/design or do I need to create more channels to handle multiple request.
Please share your thoughts on this.
Regards,
JAM

Hi,
For XI,RFC and Idoc when it's pointing to one SAP system you don't need any further comm channels.
For JDBC , if you are pointing to only one database you can use the same channel, if the target/databse changes you need more comm channels.
Your Design is as per the standards.
Regards,
Sainath Chutke

JDBC Adapter Communication Channel error

Similar Messages

Maybe you are looking for