JDBC connection monitor on CSS11506

Hi experts
Does anyone has experiece for monitoring oracle database performance by JDBC connection from CSS11506? I guess by script?
if it is not possible to do so, if there is otherway the system do eitehr application server or DB server is performance is too low?
I found the ping is not the solution.
Any comments will be appreciated
Thanks in advance

Hello,
SASP or DFP are the only automated systems the CSS hooks directly into:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/content_lb/guide/sasp.html
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/content_lb/guide/DFP.html
You can configure Load Variables with ACA loadbalancing for a CSS based view of the load:
http://www.cisco.com/en/US/docs/app_ntwk_services/data_center_app_services/css11500series/v8.20/configuration/content_lb/guide/Load.html#wp1077555
Regards,
Chris Higgins

Similar Messages

Proactive JDBC Connection Monitoring

Does the Web AS provide any monitoring tools for the JDBC Connector service that produce alerts when a datasource service loses connectivity with its database?

Hi,
Check this links
http://help.sap.com/saphelp_webas630/helpdata/en/b0/6e62f30cbe9e44977c78dbdc7a6b27/content.htm
http://help.sap.com/saphelp_nw04/helpdata/en/56/1e5d427213d142e10000000a1550b0/content.htm
i don't know it directly address your problem.
This forum thread
short dump when loggin and jdbc driver error

Monitor_jdbc_conn.sql - Script to monitor JDBC connections

Hi
We are using oracle11 (11.5.10.2) on windows 2000 server
i need to monitor JDBC connections for that i want to schedule that script which runs every hour and after completion it creates output in a file with unique name.
How can i create such script?
Thanks
OH

Hi;
Please follow below for schedule script-task on windows platform:
How To Schedule Tasks in Windows
http://support.microsoft.com/kb/308569
How To Schedule Tasks in Windows
http://www.iopus.com/guides/winscheduler.htm
How do I schedule jobs on Win32 platforms?
http://docs.activestate.com/activeperl/5.10/faq/Windows/ActivePerl-Winfaq4.html#How_do_I_schedule_jobs_on_Win32_
Hope it helps
Regard
Helios

Welogic 9.2 jdbc connection pool monitoring section not displaying server

Welogic 9.2 managed jdbc connection pool monitoring section not displaying server name. Can you please let me know how can i achive this

Hi,
It happens if the Connectivity is Lost b/w DataBase & WLS Server...In that case in the WLS AdminConsole---DataSource---Monitoring Tab you wont see even the Testing Page with valid datasource to test it.
So please make sure that the N/W connectivity proper....One more thing you can try:
<h3>Test-1</h3>
You can use *“weblogic.Admin”* utility to Enable and Disable the Pool (DataSource) Just to Confirm whether the dataSource is actually active or not::
Step1). run *"setWLSEnv.sh"* first in the same Shell prompt....then do the following:
Step2). To suspend:
java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic SUSPEND_POOL YourDataSourceName
Step3). To re-enable:
java weblogic.Admin -url t3://localhost:7001 -username weblogic -password weblogic RESUME_POOL YourDataSourceName
To test whether you are getting any Exception or Error while doing this....If yes u are getting any Error or exception then It means there May be some Database connectivity issue...
<h3>Test-2</h3>
Please use the following Utility to Test the Database connectivity from your WLS Server box:

java -classpath /opt/app/bea/weblogic92mp2/weblogic92/server/lib/weblogic.jar -Dbea.home=/opt/app/bea/weblogic92mp2 utils.dbping ORACLE_THIN DbUserName DBPassword somethingDbUrl.Something.net:1521:dbInstance

Syntax:
java -classpath /opt/app/bea/weblogic92mp2/weblogic92/server/lib/weblogic.jar -Dbea.home=/opt/app/bea/weblogic92mp2 utils.dbping ORACLE_THIN <DBUserName> <DBPassword> <DBURL>
The above utilty will test the DB Connectivity ...you need to run it from your WLS server Box...
<h3>Another Simple Alternative of Test-2</h3>
http://jaysensharma.wordpress.com/2010/03/23/testing-datasource-status-using-wlst/
Thanks
Jay SenSharma
http://jaysensharma.wordpress.com (WebLogic Wonders Are Here)

Monitoring total number of JDBC connections

We have our application deployed in the Oracle 10g Application server, it uses Toplink 10g for the Persistence and OR mapping and the Oracle 9i database for data storage, the database connection pool is built and maintained by Toplink.
We observed that on the administration screen for each container, there are 2 parameters, number of active database connections and the total number of JDBC connections.
We did some load testing for the application and observed the following behaviour on the container.
1. When the number of parallel users are 10, behaviour seems to be normal, the active database connections are less than 20(used by the connection pool built by Toplink) and the total number of JDBC connections is the same as the number of database connections.
2. When the number of parallel users is increased to 50, we see that the active database connections is still less than 20, but the total number of JDBC connections just blowed up to 4000+ in less than 2 minutes and still growing. We have no valid explanation for this behaviour as the active sessions is still less than 20. Also we see no obnormal behaviour in our application log files.
The questions i have are
1. What could be the reason for the above abnormal behaviour?
2. How this parameter "Total number of JDBC connections" for a container is actually measured?
3. DOes this parameter gets affected by how we run the database i.e. in Dedicated server mode or Despactcher mode?
Many thanks for any information on this topic..

Perhaps your connection inactivity timeout is slightly too low, so that your connections are being closed and reopened at almost the same frequency. Try increasing the timeout.
Good Luck,
Chris

What are the DMS metrics related to Open/Total JDBC Connections?

Hi,
We need to monitor that state of the JDBC Connection Pool (Available conns, Max conns, etc.) by reading DMS, however we are struggling to find which is the right DMS metric associated to it?
We tried the table modplsql_DatabaseConnectionPool however it seems to be never loaded.
Thanks in advance!
CR

Frances,
For example, use "min-connections" to specify how
many connections to pre-populate in the pool.Since when does "min-connections" pre-populate the pool?
According to my observations, there are no database connections established when OC4J starts up. Connections are only created when necessary. As a matter of fact, I still haven't seen anything in the behaviour of OC4J to indicate that it doesn't totally ignore the "min-connections" attribute.
[I have, on the other hand, seen that "max-connections" is taken into account by OC4J.]
Good Luck,
Avi.

Total JDBC connections rising steadily

Our J2EE application has been crashing recently. The app stops responding to requests and is eventually restarted by OPMN. I have been monitoring it through the enterprise manager web page since the the crashes seem to be related to waiting for database resources. The number of open JDBC connections stays low, always less than 10. However, the total number of JDBC connections rises steadily through the day getting well past 1000. Is this normal?
Does it represent leakage of connections from the pool?
We are using OC4J 9.0.4.0 with a patch to fix the connection pool bug.
The data-source is defined as follows:
<data-source
 class="com.evermind.sql.DriverManagerDataSource"
 name="OracleDS"
 location="jdbc/OracleCoreDS"
 xa-location="jdbc/xa/OracleXADS"
 ejb-location="jdbc/OracleDS"
 connection-driver="oracle.jdbc.driver.OracleDriver"
 username="asuser"
 password="unguessable"
 url="jdbc:oracle:thin:@dbserver:1526:dbinstance"
 inactivity-timeout="30"
/>

The Total number of connections figure indicates the total number of connections that have been opened since OC4J was started.
The Open number of connections figure indicates the total number of connections currently open.
Since you say that the open connections figure stays below 10, this suggests that you do not have a connection leak, but your inactivity time out is too low, and therefore your connections are being closed before they can be reused - hence the large total number of connections.
Good luck.

Two jdbc connections in one transaction

Hi 
 
 In a method of a container managed ejb session bean I have two jdbc connections. I've expected, that they will be in the same transaction, so results of any actions performed with first connection will be visible for the second connection, but it is not. 
 I've checked, that there are two sessions at the database, so it seams that there are simply separate transactions. Is it a problem with a ejb-jar.xml (will paste it later), datasource (driver - Oracle Thin non-XA; 1PC selected) or such behaviour can not be achieved in WLS ? 
 
 regards
 
 <?xml version="1.0" encoding="UTF-8"?>
 
 <!DOCTYPE ejb-jar PUBLIC "-//Sun Microsystems, Inc.//DTD Enterprise JavaBeans 2.0//EN" "http://java.sun.com/dtd/ejb-jar_2_0.dtd">
 
 <ejb-jar >
 
 <description><![CDATA[No Description.]]></description>
 <display-name>ConnectionTest1</display-name>
 
 <enterprise-beans>
 <session >
 <description><![CDATA[]]></description>
 
 <ejb-name>ConnectionTest1</ejb-name>
 
 <home>pl.axit.test.ConnectionTest1Home</home>
 <remote>pl.axit.test.ConnectionTest1</remote>
 <ejb-class>pl.axit.test.ConnectionTest1Bean</ejb-class>
 <session-type>Stateless</session-type>
 <transaction-type>Container</transaction-type>
 
 <resource-ref >
 <res-ref-name>jdbc/wowrite</res-ref-name>
 <res-type>javax.sql.DataSource</res-type>
 <res-auth>Container</res-auth>
 </resource-ref>
 </session>
 </enterprise-beans>
 
 <assembly-descriptor>
 <container-transaction>
 <description/>
 <method>
 <description/>
 <ejb-name>ConnectionTest1</ejb-name>
 <method-name>*</method-name>
 </method>
 <trans-attribute>Required</trans-attribute>
 </container-transaction>
 
 </assembly-descriptor>
 </ejb-jar>

Hi,
 are you using XA transactions? Two separate JDBC Connections treated
 within one transactional context will require two phase commit (via
 Emulation or an XA database driver) Please check the connections
 settings within your datasources.
 Rgds,
 Axel van Lil (LMIS.de)
 Lukas Uruski schrieb:
 > I forgot to add, that in administration console in server_name > Monitoring > JTA parameter "Transactions Total Count" increases by one each time method from previous post is invoked.

New ADF Taskflow transaction acquires a new JDBC connection?

Hi,
I would like to know more about ADF Taskflow transaction in relation to JDBC Connection.
tf1 ----(contains)---- page1 and call to tf2
tf2 ----(contains)---- page2
page1 - search objects
page2 - edit objects
I have two pages part of two taskflows, first taskflow does not create any transaction but the page1 in tf1 shows a searh screen for objects. I want to use transaction behavior of ADF TF for tf2 which is called in tf1.
My tf2 contains a page for edit objects, if i set New transaction as TF transaction behavior for tf2.
Does it really acquire a new JDBC connection?
I really appreciate if someone can help me with this.
Thanks,
Sunil.

"Is there any way to achieve 1 user ---> 1 connection ?"
I don't claim to be an expert on answering this as there's still a lot of things I need to investigate, and other's in the forum may chime in with more informed answers, but my understanding is you need to:
a) Use a single root AM
b) Configure your BTFs to use "shared data control scope" and the same AM
c) All of your BTFs should use "Use existing transaction if possible"
Because of "c", the very first BTF called, will not have a transaction to borrow, so it will establish a new transaction and therefore a new connection.
An alternative is, and I'm on shaky grounds here so please check this for yourself, but you could set all your BTFs to "use no transaction", which implies I believe they switch back to the model used in JDev 10g, where it's purely your AMs that determine connections/transactions.
As for saying 250 connections sounds very high, that's really up to you. If you build an application that you need to support a user with multiple transactions, it's your requirement that causes this. IMHO Oracle has given you the flexibility to build your application anyway you want, so it's up to you to decide if you want multiple concurrent transactions per user or not.
Finally regards the behaviour observed in WLS, note that the AM pooling options can influence the behvaiour of connections, so it's hard to say what you're seeing is correct, it depends. A suggestion is to install Oracle's Fusion Middleware Control application and use that for monitoring statistics; the FMW Control has smarts built it to help you observe the AM pooling and connection pooling. Andrejus Baranovskis has a few blog posts describing how he used this to track the pooling options.
CM.

Why my MySQL JDBC Connect fail??

Dear friends:
I have following code:
import java.sql.Connection;
import java.sql.DriverManager;
import java.sql.SQLException;
public class JdbcExample2 {
public static void main(String args[]) {
 Connection con = null;
 try {
 Class.forName("com.mysql.jdbc.Driver").newInstance();
 //jdbc:mysql://host_name:port/dbname
// con = DriverManager.getConnection("jdbc:MySQL:///test","admin", "admin");
 con = DriverManager.getConnection("jdbc:MySQL://localhost:3306/test","admin", "admin");
 if(!con.isClosed())
 System.out.println("Successfully connected to " +
 "MySQL server using TCP/IP...");
 } catch(Exception e) {
 System.err.println("Exception: " + e.getMessage());
 } finally {
 try {
 if(con != null)
 con.close();
 } catch(SQLException e) {}
}But when I run , I got following error:
Exception: com.mysql.jdbc.Driver
My question is:
[1]. when I connect to MySQL Server through mySQL Client, I got
Enter password: *****
Welcome to the MySQL monitor. Commands end with ; or \g.
Your MySQL connection id is 18 to server version: 4.1.21-community-nt
Type 'help;' or '\h' for help. Type '\c' to clear the buffer.
mysql>
how Can I determine MySQL Server name?? I forgot when I install, maybe MySQL is my SQL Server name
[2]. Do I need to creat a user DSN name or System DSN name for MySQL Server?? which one is best??
How to do it??
[3]. How to make above simple JDBC program runnable??
Thanks
sunny
Message was edited by:
sunnymanman

Thanks, see new errors:
C:\Project\java>java Jdbc11
Copyright 2004, R.G.Baldwin
java.sql.SQLException: Access denied for user 'admin'@'localhost' (using password: YES)
at com.mysql.jdbc.SQLError.createSQLException(SQLError.java:946)
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:2941)
at com.mysql.jdbc.MysqlIO.checkErrorPacket(MysqlIO.java:868)
at com.mysql.jdbc.MysqlIO.secureAuth411(MysqlIO.java:3340)
at com.mysql.jdbc.MysqlIO.doHandshake(MysqlIO.java:1238)
at com.mysql.jdbc.Connection.createNewIO(Connection.java:2743)
at com.mysql.jdbc.Connection.<init>(Connection.java:1553)
at com.mysql.jdbc.NonRegisteringDriver.connect(NonRegisteringDriver.java:266)
at java.sql.DriverManager.getConnection(DriverManager.java:512)
at java.sql.DriverManager.getConnection(DriverManager.java:171)
at Jdbc11.main(Jdbc11.java:23)
C:\Project\java>
any idea??
here Jdbc11.java:23 is:
Connection con = DriverManager.getConnection(
url,"admin", "YES");
my userID/Password = admin/admin;
sunny
Message was edited by:
sunnymanman

Error while creating a report that uses Oracle OCI JDBC connectivity

Please let me know why my CR and LF characters are removed from my forum posting *****
Hi,
I was trying to create a report that uses Oracle OCI JDBC connectivity. I am using Eclipse3.4 download from "cr4e-all-in-one-win_2.0.2.zip". I have successfully created a JDBC OCI connection.
The connection parameters are given below:
URL: jdbc:oracle:oci8:@xe
Database: xe
username: <userName>
password: <password>
I have tested the above connection in Data source Explorer and it works fine!!!
But I am getting the following error when I drag-and-drop a table from the list of tables. Not sure what I am missing here? Any help is highly appreciated.
com.businessobjects.reports.jdbinterface.common.DBException: InvalidURLOrClassName
 at com.crystaldecisions.reports.queryengine.driverImpl.jdbc.JDBCConnection.Open(Unknown Source)
 at com.crystaldecisions.reports.queryengine.JDBConnectionWrapper.Open(SourceFile:123)
 at com.crystaldecisions.reports.queryengine.Connection.br(SourceFile:1771)
 at com.crystaldecisions.reports.queryengine.Connection.bs(SourceFile:491)
 at com.crystaldecisions.reports.queryengine.Connection.t1(SourceFile:2979)
 at com.crystaldecisions.reports.queryengine.Table.u7(SourceFile:2408)
 at com.crystaldecisions.reports.dataengine.datafoundation.AddDatabaseTableCommand.new(SourceFile:529)
 at com.crystaldecisions.reports.common.CommandManager.a(SourceFile:71)
 at com.crystaldecisions.reports.common.Document.a(SourceFile:203)
 at com.businessobjects.reports.sdk.requesthandler.f.a(SourceFile:175)
 at com.businessobjects.reports.sdk.requesthandler.DatabaseRequestHandler.byte(SourceFile:1079)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.do(SourceFile:1163)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.if(SourceFile:657)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter.a(SourceFile:163)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.a(SourceFile:525)
 at com.businessobjects.reports.sdk.JRCCommunicationAdapter$2.call(SourceFile:523)
 at java.util.concurrent.FutureTask$Sync.innerRun(Unknown Source)
 at java.util.concurrent.FutureTask.run(Unknown Source)
 at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$3.doWork(ExecutorWithIdleProcessing.java:182)
 at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityTask.run(PriorityTask.java:75)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.runSubtask(PriorityCompoundCancellableRunnable.java:187)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityProgressAwareRunnable.runSubtask(PriorityProgressAwareRunnable.java:90)
 at com.businessobjects.crystalreports.designer.core.util.thread.PriorityCompoundCancellableRunnable.doWork(PriorityCompoundCancellableRunnable.java:144)
 at com.businessobjects.crystalreports.designer.core.util.thread.AbstractCancellableRunnable.run(AbstractCancellableRunnable.java:69)
 at com.businessobjects.crystalreports.designer.core.util.thread.ExecutorWithIdleProcessing$IdleTask.run(ExecutorWithIdleProcessing.java:320)
 at java.util.concurrent.ThreadPoolExecutor$Worker.runTask(Unknown Source)
 at java.util.concurrent.ThreadPoolExecutor$Worker.run(Unknown Source)
 at java.lang.Thread.run(Unknown Source)
Thanks
Karthik
Edited by: KARTHIK1 on Oct 14, 2009 9:38 PM

Hi Ted,
Thanks for the feedback. I was able to create a report in Creystal Reports Designer 2008 using OCI. It is not allowing only in the Eclipse plugin. In our environment we are not allowed to user Oracle thin connections and ONLY OCI is allowed.
1) Can you please let me know if there is a way to do this?
2) Will it allow data sources using native database driver?
3) If so, can I use JRC to create these reports from a desktop java program?
Thanks & Regards
Karthik
Edited by: KARTHIK1 on Oct 15, 2009 4:38 PM

Issue JDBC connection pool with Glassfish 3.1.2.2 and Oracle XE 11gR2

Hello,
I am experiencing an issue with pinging a JDBC connection Pool.
I installed the following without any warnings or errors:
Operating System: Oracle Enterprise Linux 5
Oracle XE 11gR2 (11.2.0.2.0) database
Glassfish 3.1.2.2
I will refer to the steps I did after the installations
1) In the .profile file of the OS I add the following:
JRE_HOME=/usr/java/jre1.6.0_31; export JRE_HOME
JAVA_HOME=/usr/java/jdk1.6.0_31; export JAVA_HOME
GLASSFISH_DIR=/u01/glassfish3
GLASSFISH_HOME=/u01/glassfish3/glassfish
DERBY_HOME=$GLASSFISH_DIR/javadb
OPEN_MQ_HOME=$GLASSFISH_DIR/mq
PATH=:$JAVA_HOME/bin:$JRE_HOME/bin:$PATH:$HOME/bin:$GLASSFISH_HOME/bin:$DERBY_HOME/bin:$OPEN_MQ_HOME/bin
export GLASSFISH_HOME
export DERBY_HOME
export OPEN_MQ_HOME
export PATH
LD_LIBRARY_PATH=/u01/app/oracle/product/11.2.0/xe/lib; export LD_LIBRARY_PATH
. /u01/app/oracle/product/11.2.0/xe/bin/oracle_env.sh
2) I copied the ojdbc6.jar to the $GLASSFISH_HOME/domains/domain1/lib
3) I login to the Glassfish admin console and created a new JDBC Connection Pool.
Pool Name: ds_orasys
Resource Type: javax.sql.DataSource
Datasource Classname: oracle.jdbc.pool.OracleDataSource
User: [myschema]
Password: [myschema password]
URL: jdbc:oracle:thin:@localhost:1521:xe
When I ping the connection pool I get the following message in the server log:
[#|2012-10-23T12:14:37.069+0300|WARNING|glassfish3.1.2|javax.enterprise.resource.resourceadapter.com.sun.enterprise.connectors.service|_ThreadID=22;_ThreadName=Thread-2;|RAR8054: Exception while creating an unpooled [test] connection for pool [ ds_orasys ], Connection could not be allocated because: Invalid Oracle URL specified|#]
[#|2012-10-23T12:14:37.071+0300|SEVERE|glassfish3.1.2|org.glassfish.admingui|_ThreadID=19;_ThreadName=Thread-2;|RestResponse.getResponse() gives FAILURE. endpoint = 'http://212.205.62.217:4848/management/domain/resources/ping-connection-pool.json'; attrs = '{id=ds_orasys}'|#]
I tried to use different jar files. I used ojdbc6dms.jar and ojdbc14.jar.
I also copied the jar files in the $GLASSFISH_HOME/domains/domain1/lib/ext directory as some people suggested. Still no luck. I keep getting the same error messages in the server.log
Can anybody help me out or point me to the right direction.
Thank you in advance

The error is in the URL. It was in front of my eyes and I couldn't see the error. I skipped the ':' before the '@' when I created the pool. It is working fine now.

JDBC Connection pool recovery after DB server restart

I am finding that Kodo is throwing the following exception after I restart
my database server (mysql). I am doing the database server restart while my
application server is idle, so it is not during a transaction.
Communication link failure: java.net.SocketException [code=0;state=08S01]
NestedThrowables:
com.solarmetric.kodo.impl.jdbc.sql.SQLExceptionWrapper:
This is presumably due to the JDBC connection pooling. Is there a
configuration setting that allows Kodo to detect such failures and reconnect
to the database server without exposing this problem to the application
code? For example, WebLogic Server's JDBC connection pool has a setting that
enables testing a connection and recovering from such failures before
allocating it from the pool.
Ben

This is presumably due to the JDBC connection pooling. Is there a
configuration setting that allows Kodo to detect such failures and reconnect
to the database server without exposing this problem to the application
code?Not right now. You can log an enhancement request with our bug database:
http://bugzilla.solarmetric.com/

JDBC connection pool failures when used by JMS stores

 We are using WebLogic 6.1 sp2. We defined a separate connection pool for use by
 a JMS Store.
 <JDBCConnectionPool Name="sybaseJMSPool"
 Targets="cluster00"
 InitialCapacity="2"
 MaxCapacity="10"
 DriverName="com.sybase.jdbc2.jdbc.SybDriver"
 Properties="[email protected]@;[email protected]@;charset=utf8"
 URL="jdbc:sybase:Tds:@jms.db.host@/@jms.db.name@"/>
 (note that the @xxx@ string are replaced by actual values).
 We are using Sybase Jconnect 5.5 to a Sybase ASE 12.5 database.
 We deployed this configuration on a number of environments (testing, staging,
 ..). The actual hardware and network configuration is different for the different
 system, but the WebLogic domain stays the same regarding this issue.
 On the test system we frequently get the following exceptions:
 <Aug 13, 2002 1:56:04 PM CEST> <Alert> <JMS> <www00-test> <node00>
 <ExecuteThread: '6' for queue: 'JMS.TimerClientPool'> <> <> <040048>
 <JMSServer "JMSServer00", store failure while writing message for topic
 OrderChangeTopic, java.io.IOException: JMS JDBC store, connection pool =
 <sybaseJMSPool>, prefix = <JMS00>: write failed
 java.sql.SQLException: JZ006: Caught IOException:
 com.sybase.jdbc2.jdbc.SybConnectionDeadException: JZ0C0: Connection is already
 closed.
 at com.sybase.jdbc2.jdbc.ErrorMessage.raiseErrorCheckDead
 (ErrorMessage.java:715)
 at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:3124)
 at com.sybase.jdbc2.tds.Tds.cancel(Tds.java:1412)
 at com.sybase.jdbc2.tds.Tds.cancel(Tds.java:1341)
 at com.sybase.jdbc2.jdbc.SybStatement.doCancel(SybStatement.java:564)
 at com.sybase.jdbc2.jdbc.SybStatement.updateLoop(SybStatement.java:1672)
 at com.sybase.jdbc2.jdbc.SybStatement.executeUpdate
 (SybStatement.java:1625)
 at com.sybase.jdbc2.jdbc.SybPreparedStatement.executeUpdate
 (SybPreparedStatement.java:91)
 at com.p6spy.engine.logging.P6LogPreparedStatement.executeUpdate
 (P6LogPreparedStatement.java:179)
 at weblogic.jdbc.pool.Statement.executeUpdate(Statement.java:293)
 at weblogic.jms.store.JDBCIOStream.write(JDBCIOStream.java:1246)
 at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:250)
 at weblogic.jms.store.JMSStore.execute(JMSStore.java:182)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 .>
 java.io.IOException: JMS JDBC store, connection pool = <sybaseJMSPool>, prefix
 = <JMS00>: write failed
 java.sql.SQLException: JZ006: Caught IOException:
 com.sybase.jdbc2.jdbc.SybConnectionDeadException: JZ0C0: Connection is already
 closed.
 at com.sybase.jdbc2.jdbc.ErrorMessage.raiseErrorCheckDead
 (ErrorMessage.java:715)
 at com.sybase.jdbc2.tds.Tds.handleIOE(Tds.java:3124)
 at com.sybase.jdbc2.tds.Tds.cancel(Tds.java:1412)
 at com.sybase.jdbc2.tds.Tds.cancel(Tds.java:1341)
 at com.sybase.jdbc2.jdbc.SybStatement.doCancel(SybStatement.java:564)
 at com.sybase.jdbc2.jdbc.SybStatement.updateLoop(SybStatement.java:1672)
 at com.sybase.jdbc2.jdbc.SybStatement.executeUpdate
 (SybStatement.java:1625)
 at com.sybase.jdbc2.jdbc.SybPreparedStatement.executeUpdate
 (SybPreparedStatement.java:91)
 at com.p6spy.engine.logging.P6LogPreparedStatement.executeUpdate
 (P6LogPreparedStatement.java:179)
 at weblogic.jdbc.pool.Statement.executeUpdate(Statement.java:293)
 at weblogic.jms.store.JDBCIOStream.write(JDBCIOStream.java:1246)
 at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:250)
 at weblogic.jms.store.JMSStore.execute(JMSStore.java:182)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 at weblogic.jms.store.JDBCIOStream.throwIOException
 (JDBCIOStream.java:1213)
 at weblogic.jms.store.JDBCIOStream.write(JDBCIOStream.java:1256)
 at weblogic.jms.store.StoreRequest.doTheIO(StoreRequest.java:250)
 at weblogic.jms.store.JMSStore.execute(JMSStore.java:182)
 at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
 at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
 Before that this message appeared:
 <Aug 13, 2002 11:31:16 AM CEST> <Error> <ConnectionManager> <www00-test>
 <node00> <ExecuteThread: '26' for queue: 'default'> <> <> <000000>
 <Closing: 'weblogic.rjvm.t3.T3JVMConnection@795af6' because of: 'Server
 received a message over an uninitialized connection: 'JVMMessage from: 'null'
 to: '-4555218188801970213S:192.168.13.1:[7001,7001,7002,7002,7001,7002,-
 1]:ADIS:node00' cmd: 'CMD_REQUEST', QOS: '101', responseId: '1',
 invokableId: '287', flags: 'JVMIDs Not Sent, TX Context Not Sent', abbrev
 offset: '34'''>
 This problem did not occur on another system which was used during a 2 day stress
 testing session.
 It seems that the problem occurs after a period in which no user request where
 made. The user requests trigger EJB's that start sending JMS messages.
 When the problem occurs, the JMS messaging systems seems to lock up as no messages
 are received anymore by the different listeners (MDBs).
 Undeploying and redeploying the JBDC connection pool solves the problem. This
 solution is unacceptable in case of a production system.
 A similarly defined connection pool, which is used by the EJBs to make database
 connection, does not manifest this problem.
 <JDBCConnectionPool Name="sybasePool"
 Targets="cluster00"
 InitialCapacity="10"
 CapacityIncrement="5"
 MaxCapacity="50"
 PreparedStatementCacheSize="150"
 DriverName="com.sybase.jdbc2.jdbc.SybDriver"
 Properties="[email protected]@;[email protected]@;JCONNECT_VERSION=6;charset=utf8"
 URL="jdbc:sybase:Tds:@db.host@/@db.name@"/>
 The JDBC connection pool is used as follows by the JDBC store
 <JMSJDBCStore ConnectionPool="sybaseJMSPool" Name="JDBCStore00" PrefixName="JMS00"/>
 <JMSServer Name="JMSServer00" Store="JDBCStore00" Targets="node00">
 <JMSTopic JNDIName="ADIS.JMSError" JNDINameReplicated="false" Name="ErrorTopic"/>
 <JMSTopic JNDIName="ADIS.Status"
 Name="StatusTopic" RedeliveryDelayOverride="300000"/>
 <JMSTopic JNDIName="ADIS.OrderChange" JNDINameReplicated="false"
 Name="OrderChangeTopic" RedeliveryLimit="3"/>
 </JMSServer>
 Turning on the "Test Reserved Connection" with a appropriate test table does not
 help.
 Some sources on the internet tell us that JZ0C0 errors in the Jconnect driver
 can be related to network problems. Nevertheless the connection pool should be
 able to cope with this.
 Can you provide any solution for this ? Or give us hints what can cause the problem


Zhenhao Qi wrote:
thanks! Joe.
The SQL statement itself can no longer be simplified, the long excuation time is due to the database size and complicated Select criteria. I can easily reproduce the problem by using this SQL. I tried "BEA's Oracle driver (Type 4): Version 8.1.7,9.0.1,9.2.0". the question can be dissect into 2 pieces:
1) why the jdbc connection (using oracle.jdbc.OracleDriver) won't return anything if the SQL execution time > 5min, that is probably the Oracle's problem
2) why the occupied connection pool won't release even I set "Statementtimeout=600", this is Weblogic's problem.
ZhenhaoHi. Yes, (1) is oracle's problem. (2) may also be. The JDBC spec has very few
allowances for one thread to interrupt a second thread's JDBC call. If we
transmit your timeout request by calling setQueryTimeout() on the oracle
statement, and if you have a weblogic-controlled transaction we call
Statement.cancel() on any ongoing statement, we end up relying on whether
the Oracle driver implements and responds to those calls.
Are you doing weblogic-controlled transactions? Are you/can you
call Statement.setQueryTimeout() on your statements, or are these
generated JDBC queries?
If you can duplicate the problem using the weblogic.jdbc.oracle.OracleDriver
we have some other debug avenues. This would be good even if you really
want to use the thin driver, because we will do the same JDBC calls to
either driver, and the debug would prove (if) we set up a query timeout
and if we call cancel(). If we do, then we can know that it is the Oracle
driver failing in these regards.
Joe

JDBC Connection pools and clusters (is max connection for entire cluster?)

Hi,
Quick question.
When using JDBC connection pools in WAS 6.40 (SP13) in a clustered environment. Are the max connections the number
a)Each application server can use
b)The entire cluster can use
Would believe a), but I'd like it confirmed from someoneelse

Hi Dagfinn,
your assumption is correct. Therefore, in a cluster environment you'd need to make sure the DB can open Number of nodes X max connections.

JDBC connection monitor on CSS11506

Similar Messages

Maybe you are looking for