JDEV11 - No SOA configured Target Servers found!

Despite WLS103 and managed server with soa_server1 is up and running - and the AS connection tested positive I get the error:
Deployment cannot continue. No SOA configured Target Servers found!
I am running
JDEV Build JDEVADF_11.1.1.1.0_GENERIC_090615.0017.5407 (installed for new) - plus the
SOA composite add on version 11.1.1.52.19
and I have installed the WLS10.3 + SOA Suite 11g release for new (ORACLE_SOA1) after I run the RC3 before.
I have also setup dbadapter, jmsadapter, etc. for the SOAEND2END Purchase order Foundation training Tutorial Chapter 1 - Everything on Win XP SP3.
In JDEV 11 (Buid 5361) I remember having taken over the settings from the previous install. So might JDEV point to some older SOA server name ??? - which is not up an druning anymore ?
pls kindly advise.
TIA
Bernhard

Hi,
I have the same error and tried to follow your advice without success.
I have my JDev11 connection sucessfull "tested" against my remote WebLogic, which has both the Administrative and the soa managed servers up and the health box OK. What the reason why I get the same error "Deployment cannot continue! No SOA configured target servers found!"? One thing I noted from the link:
http://download.oracle.com/docs/cd/E12839_01/integration.1111/e10224/sca_lifecycle.htm#CACICHJD
is that I can choose to deploy JAR or via the connector but I don't have the exact same screen.
Environment:
O.S. Linux RED HAT 3.0 with JDEV Studio Edition Version 11.1.1.1.0
Windows 2008 with WebLogic Server Version: 10.3.1.0
Weblogic instance starts from Windows 2008 "user_domain"
Weblogic NodeManager starts from Windows 2008
Summary of my WebLogic servers sees AdminServer (admin) RUNNING OK, soa_dev_server RUNNING OK, bam_dev_server SHUTDOWN.
Any help is appreciated.
Thanks.
Sal

Similar Messages

No SOA configured servers found for deploying

Hi
I am very much novice in BPEL. I have created a very small BPEL process and tried to deploy it in Weblogic Server.I get this message in the deployement log:
[11:55:13 AM] #### Deployment incomplete. ####
[11:55:13 AM] No SOA configured servers found for deploying the archive file:/D:/JDeveloper/mywork/chapter2/EchoComposite/deploy/sca_EchoComposite_rev1.0.jar
(oracle.tip.tools.ide.fabric.deploy.common.SOARemoteDeployer
I checked the entreprise manager (EM) & I discovered that I have no SOA folder ,no soa_infra and no managed server called soa_server1 in my managed servers list!!
can you help me to fiw this please?
regards!
Edited by: 867232 on 7 juil. 2011 05:55

Login to weblogic admin console and go to section "Deployments". Make sure that application SOA-INFRA is in active state. If it is not then check SOA server startup log to find out any errors which could not let SOA-INFRA deploy. You may refer -
No SOA configured servers found for deploying
Regards,
Anuj
Edited by: Anuj Dwivedi on Jul 8, 2011 9:41 AM

Error finding SOA configured servers.

Hi All,
i am not able to connect the server from Jdeveloper.while deploying at 4th step of the process(SOA Servers) through an Exception and shows that "Error finding SOA configured servers to deploy archive. Deployment connot continue." some times it's working fine, some times the shows the exception. can any one let me know the reslovution for this.
please find the blow exception details.
oracle.rc.asadapter.connection.ConnectionException
     at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10JndiProvider.getPresentation(Weblogic10JndiProvider.java:86)
     at oracle.rc.asadapter.connection.AppServerConnectionImpl$PM.getPresentation(AppServerConnectionImpl.java:171)
     at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listWeblogicSOAServers(ASBrowserHelper.java:242)
     at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper.listSOAServers(ASBrowserHelper.java:199)
     at oracle.tip.tools.ide.fabric.asbrowser.ASBrowserHelper$RunnableListSOAServers.run(ASBrowserHelper.java:324)
     at oracle.ide.dialogs.ProgressBar.run(ProgressBar.java:655)
     at java.lang.Thread.run(Thread.java:662)
Caused by: javax.naming.AuthenticationException [Root exception is java.lang.SecurityException: User: weblogic, failed to be authenticated.]
     at weblogic.jndi.internal.ExceptionTranslator.toNamingException(ExceptionTranslator.java:42)
     at weblogic.jndi.WLInitialContextFactoryDelegate.toNamingException(WLInitialContextFactoryDelegate.java:788)
     at weblogic.jndi.WLInitialContextFactoryDelegate.pushSubject(WLInitialContextFactoryDelegate.java:682)
     at weblogic.jndi.WLInitialContextFactoryDelegate.newContext(WLInitialContextFactoryDelegate.java:469)
     at weblogic.jndi.WLInitialContextFactoryDelegate.getInitialContext(WLInitialContextFactoryDelegate.java:376)
     at weblogic.jndi.Environment.getContext(Environment.java:315)
     at weblogic.jndi.Environment.getContext(Environment.java:285)
     at weblogic.jndi.WLInitialContextFactory.getInitialContext(WLInitialContextFactory.java:117)
     at javax.naming.spi.NamingManager.getInitialContext(NamingManager.java:667)
     at javax.naming.InitialContext.getDefaultInitCtx(InitialContext.java:288)
     at javax.naming.InitialContext.init(InitialContext.java:223)
     at javax.naming.InitialContext.<init>(InitialContext.java:197)
     at oracle.rc.asadapter.weblogic.connection.spi.Weblogic10JndiProvider.getPresentation(Weblogic10JndiProvider.java:84)
     ... 6 more
Caused by: java.lang.SecurityException: User: weblogic, failed to be authenticated.
     at weblogic.common.internal.RMIBootServiceImpl.authenticate(RMIBootServiceImpl.java:116)
     at weblogic.common.internal.RMIBootServiceImpl_WLSkel.invoke(Unknown Source)
     at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:667)
     at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:522)
     at weblogic.security.acl.internal.AuthenticatedSubject.doAs(AuthenticatedSubject.java:363)
     at weblogic.security.service.SecurityManager.runAs(SecurityManager.java:146)
     at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:518)
     at weblogic.rmi.internal.wls.WLSExecuteRequest.run(WLSExecuteRequest.java:118)
     at weblogic.work.ExecuteThread.execute(ExecuteThread.java:209)
     at weblogic.work.ExecuteThread.run(ExecuteThread.java:178)
Thans
Hari
Edited by: Hari on 22 Sep, 2011 6:57 AM

Hi Hari
The error stack trace clearly says "User: weblogic, failed to be authenticated." When you configure the Weblogic Domain in your JDeveloper, make sure you give all the details correct like host, port, username, password and domain name. Also you can Test Connection of that configured domain. So first test this connection and then it should work fine.
Thanks
Ravi Jegga

CF10 Some pages render blank, No configured web servers

I'm moving from CF8 to CF10 and having some issues. My CF10 install is a clean install on brand new server running Windows Server 2008 R2 64bit IIS 7.5. I've upgraded to CF version 10,0,11,285437. Out of the 50 or so Apps on the server almost everything works, but there are a few pages that just don't render at all. No error, nothing. Viewing the source for the page just shows an empty HTML page. Coldfusion logs are empty and there's 500 null error in the IIS logs.
While researching that issue I found many people recommending I rerun wsconfig after patching CF, so I tried that and it looks like my sites aren't configured correctly. During install I configured the sites individually (2 of them run in 32 bit while the cfadmin site runs in 64.) Now when I run the Web Server Configuration Tool as administrator I just get a Configured Web Servers box that is empty. When I click add the next window shows IIS, but the drop down for IIS Web Sites is disabled. Checking the Configure 32 bit web server option doesn't change anything. 99 out of a 100 pages work just fine, so it seems odd that the tool is telling me the server isn't configured. I'm not even sure where to start at this point.
EDIT: I've read most of the posts related to the wsconfig and none of the solutions presented yet make any difference. ASP.NET, .NET Extensibility, CGI, ISAPI Extensions, ISAPI Filters are all already installed. I've tried reinstalling CF, IIS, even going back to a clean snapshot of he OS several times and the result is always the same. I've even tried it with and without IIS Compatability.
Edit2: I've figured out the problem with wsconfig (McAfee IPS was preventing it from working.) Unfortunately, even after reconfiguring the servers I'm still getting the blank page problem. Nothing in any of the CF logs and a 500 null error in the IIS logs.

Hi
Out of 20, if there are 10 coldfusion (.cfm) pages which are working fine and rest of the 10 are not working fine then you must run the code analyzer to check the error on those pages as you mentioned that you have moved to CF 10 from CF 8.
Run wsconfig as Run as Admin and then see how many connector showing up there? Like if you have configure webserver with All option, then it will display on 1.
Thanks
VJ

Error target not found base-level failed to install the packages

Im trying to install arch on my Virtualbox VM and its just returning:
error target not found base-level failed to install the packages to new root
What do I do? I have selected the right mirrors, pinging google, my own VPS's and a few other servers and they all pinged fine. Any ideas on whats up? Think my VPN's IP has been blocked and thats why I cant download anything? I have tried pacman -Ssy and it worked fine but still no.

Please read the following and follow the advice included:
https://bbs.archlinux.org/viewtopic.php?id=57855
With that, be sure to clarify whether the typo was just here on the forum, or whether it was also in your original command. If it was in your original command, that would explain your results.

Question on The New SOA Configuration Approach Article

Hi,
I found this nice article Link: [The New SOA Configuration Approach|https://www.sdn.sap.com/irj/sdn/go/portal/prtroot/docs/library/uuid/40dabb46-dd66-2b10-1a9a-81aa620098b3] in SDN. It is very well written and easy to follow. I was trying to follow the steps. One thing confusing to me are the screen shots on page 9 and 10 for SOA Manager. I was running SOA Manager in a PI 7.10 SP4 environment but I could not find the same screens as shown in that article. Instead of the tabs as shown in the screen example I was getting a list of profile properties. And I did not find all the properties from the screen example. Does anyone know what I may be missing? Any help/hint will be appreciated.
Regards,
Jiannan Che

Hi Jiannan,
The screenshots that are in the PDF file are from Enhancement Package 1 version that would be publicly released soon. In 7.10 SP4, you see an "uglier" UI which also supports less properties, but in general the security properties are there too. Let me know if you need more details on the supported properties
Ciao, Alexander

RMAN-06026: some targets not found - aborting restore

11gR2
Could someone tell me please what am I doing wrong ?
Trying to recover a DB after losing all datafiles , control files , redo log files , and spfile
*1. set my db to archive log mode*
SQL> archive log list
Database log mode Archive Mode
Automatic archival Enabled
Archive destination USE_DB_RECOVERY_FILE_DEST
Oldest online log sequence 58
Next log sequence to archive 60
Current log sequence 60
*2. Set controlfile autobackup on*
RMAN> CONFIGURE CONTROLFILE AUTOBACKUP ON;
old RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters:
CONFIGURE CONTROLFILE AUTOBACKUP ON;
new RMAN configuration parameters are successfully stored
*3. Perform full DB backup*
RMAN> backup database ;
*4. shutdown immediate and delete all files mentioned above*
*5. startup nomount and restore spfile*
RMAN> startup nomount ;
RMAN> restore spfile from autobackup
2> recovery area = 'C:\app\Administrator\flash_recovery_area'
3> db_name = 'orcl' ;
channel ORA_DISK_1: SPFILE restore from AUTOBACKUP complete
Finished restore at 09-OCT-11
*6. restart and restore control files*
RMAN> shutdown immediate
Oracle instance shut down
RMAN> startup nomount
connected to target database (not started)
Oracle instance started
Total System Global Area 778387456 bytes
Fixed Size 1374808 bytes
Variable Size 310379944 bytes
Database Buffers 461373440 bytes
Redo Buffers 5259264 bytes
RMAN> restore controlfile from autobackup
2> recovery area = 'C:\app\Administrator\flash_recovery_area'
3> db_name = 'orcl' ;
*6. mount DB and perform incomplete recovery*
* and this is where things start to go wrong*
SQL> select sequence#, status from v$log ;
SEQUENCE# STATUS
58 INACTIVE
60 CURRENT
59 INACTIVE
RMAN> run
2> {set until sequence 59;
3> restore database ;
4> recover database ;
5> }
* and now I'm getting the following error : *
RMAN-00571: ===========================================================
RMAN-00569: =============== ERROR MESSAGE STACK FOLLOWS ===============
RMAN-00571: ===========================================================
RMAN-03002: failure of restore command at 10/09/2011 19:04:43
RMAN-06026: some targets not found - aborting restore
RMAN-06023: no backup or copy of datafile 5 found to restore
RMAN-06023: no backup or copy of datafile 4 found to restore
RMAN-06023: no backup or copy of datafile 3 found to restore
RMAN-06023: no backup or copy of datafile 2 found to restore
RMAN-06023: no backup or copy of datafile 1 found to restore
* although backup of this db exists *
RMAN> list backup of database ;
BS Key Type LV Size Device Type Elapsed Time Completion Time
5 Full 1.07G DISK 00:00:47 09-OCT-11
BP Key: 5 Status: AVAILABLE Compressed: NO Tag: TAG20111009T185500
Piece Name: C:\APP\ADMINISTRATOR\FLASH_RECOVERY_AREA\ORCL\BACKUPSET\2011_10_09\O1_MF_NNNDF_TAG20111009T185500
3NH4MK_.BKP
List of Datafiles in backup set 5
File LV Type Ckp SCN Ckp Time Name
1 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSTEM01.DBF
2 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\SYSAUX01.DBF
3 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\UNDOTBS01.DBF
4 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\USERS01.DBF
5 Full 2313843 09-OCT-11 C:\APP\ADMINISTRATOR\ORADATA\ORCL\EXAMPLE01.DBF

set until sequence 59;You want to restore/recover up to sequence 58, the given number in until sequence nnn is always not included. So the backed up datafiles are simply too new, backup was done while current sequence is 60.
You need an older backup,which is obviously not available.
Werner

How do I grant Configure Target Role

I am trying to preform an operation from within the OEM 12c console and it fails telling me I need the Configure Target role. I can't for the life of me figure out how to grant that role. Can someone help please.
Thanks.
Bill Wagman

(Updated Response )
Hi Bill,
To create a Role with the 'Configure Target Privilege' and assign it to a Target, please follow these steps....
1. In the Enterprise Manager Console, from the 'Setup' drop down menu, select 'Security' then 'Roles'
2. Select the 'Create' button.
3. Enter an appropriate role name, for this example we shall call it CONFTARGET-ROLE, hit the 'Next' button
4. Click through the next window, by hitting 'Next' on the 'Create Role CONFTARGET-ROLE:Roles page
5. Scroll down to the bottom of the page to the Target Privileges section, Select the ‘Add’ button, From the “Target Type” drop down menu, select the appropriate type, “Agent” in this instance. Check the box of the Agent Target you would like to grant this new role too. Click 'Select'.
6. Scroll to the bottom of the page, to Target Privileges, you will see the Agents listed that you selected. In the ‘Manage Target Privilege Grants’ column, Click on the pencil icon.
7. Here you will select the “Configure Target” privilege, for the required Agent Target. Click ‘Continue’.
8. When you scroll back down to the Target Privilege section of the page you will see the agent listed in the table and in the ‘Manage Target Privilege Grants’ column, you will see the ‘Configure Target’ privilege listed.
6. On the Resource Privilege page, click 'Next'
7. Decide and select which users you want to grant this next role, CONFTARGET-ROLE too, click 'Next'.
8. Review your new role then click 'Finish'.
More information about roles and privileges can be found in the Security Guide document, section 2.2 Configuring Privileges and Role Authorization, Security Features.
Please let me know if you have any other questions,
regards,
Maureen

While opening em console for soa -- Error 404--Not Found

Hi Gurus,
i installed SOA 11.1.1.5.0 wilh admin server ,soa_server,bam_server.
while opeing the fm control using http://<hostname>.<domainname>:7001/em.
the below error message is displaying .
but i am able to open with http://<hostname>.<domainname>:7001/console.
Error 404--Not Found
From RFC 2068 Hypertext Transfer Protocol -- HTTP/1.1:
10.4.5 404 Not Found
The server has not found anything matching the Request-URI. No indication is given of whether the condition is temporary or permanent.
If the server does not wish to make this information available to the client, the status code 403 (Forbidden) can be used instead. The 410 (Gone) status code SHOULD be used if the server knows, through some internally configurable mechanism, that an old resource is permanently unavailable and has no forwarding address.
Please can someone guide me how to resolve this.
Thanks
San

While opening em console for soa -- Error 404--Not Found
Regards,
Anuj

[SOLVED] error: target not found: from multiple applications

I wanted to install skype on my fresh arch OS. I tried with
sudo pacman -S skype
but I got:
error: target not found: skype
. Even though I can find skype here: https://www.archlinux.org/packages/mult … _64/skype/ on the arch website, I can't find it with pacman -S. This would be also a question ...
I downloaded the x86 package for my system, and used
sudo pacman -U skype-4.2.0.11-3-x86_64.pkg.tar.xz
, but ... I got this:
loading packages...
resolving dependencies...
warning: cannot resolve "lib32-qt4", a dependency of "skype"
warning: cannot resolve "lib32-alsa-lib", a dependency of "skype"
warning: cannot resolve "lib32-libxss", a dependency of "skype"
warning: cannot resolve "lib32-libxv", a dependency of "skype"
warning: cannot resolve "lib32-libxcursor", a dependency of "skype"
warning: cannot resolve "lib32-v4l-utils", a dependency of "skype"
:: The following package cannot be upgraded due to unresolvable dependencies:
skype
:: Do you want to skip the above package for this upgrade? [y/N]
I said ... ok, I will probably install pidgin, and install some kind of skype plugin, but now ... I tried to install teamviewer from AUR, with this command
sudo yaourt teamviewer
I choosed the second package which is the original teamviewer package not some kind of plugin, but ... I got this:
==> Edit teamviewer.install with: nano
==> Continue building teamviewer ? [Y/n]
==> ------------------------------------
==>
==> Building and installing package
==> Install or build missing dependencies for teamviewer:
error: target not found: lib32-freetype2
error: target not found: lib32-alsa-lib
error: target not found: lib32-zlib
error: target not found: lib32-libxdamage
error: target not found: lib32-gcc-libs
error: target not found: lib32-libxtst
==> Restart building teamviewer ? [y/N]
I am pretty sure there is a solution for this ... because I don't want to sit all day, trying to install an application.
Waiting for your suggestions guys.
PS: I've also tried to install for example, for skype, the lib32-qt4 library, but it's already installed, don't know what's happening.
Last edited by icebox (2013-09-27 09:36:47)

multilib is enabled from /etc/pacman.conf, but it's still the same. Also, as mentioned I got this error also with teamviewer not only skype, and I will probably get it another 1000 of times, since I tried to install only 5 applications until now
This is the /etc/pacman.conf file:
# /etc/pacman.conf
# See the pacman.conf(5) manpage for option and repository directives
# GENERAL OPTIONS
[options]
# The following paths are commented out with their default values listed.
# If you wish to use different paths, uncomment and update the paths.
#RootDir = /
#DBPath = /var/lib/pacman/
#CacheDir = /var/cache/pacman/pkg/
#LogFile = /var/log/pacman.log
#GPGDir = /etc/pacman.d/gnupg/
HoldPkg = pacman glibc
#XferCommand = /usr/bin/curl -C - -f %u > %o
#XferCommand = /usr/bin/wget --passive-ftp -c -O %o %u
#CleanMethod = KeepInstalled
#UseDelta = 0.7
Architecture = auto
# Pacman won't upgrade packages listed in IgnorePkg and members of IgnoreGroup
#IgnorePkg =
#IgnoreGroup =
#NoUpgrade =
#NoExtract =
# Misc options
#UseSyslog
#Color
#TotalDownload
CheckSpace
#VerbosePkgLists
# By default, pacman accepts packages signed by keys that its local keyring
# trusts (see pacman-key and its man page), as well as unsigned packages.
SigLevel = Required DatabaseOptional
LocalFileSigLevel = Optional
#RemoteFileSigLevel = Required
# NOTE: You must run `pacman-key --init` before first using pacman; the local
# keyring can then be populated with the keys of all official Arch Linux
# packagers with `pacman-key --populate archlinux`.
# REPOSITORIES
# - can be defined here or included from another file
# - pacman will search repositories in the order defined here
# - local/custom mirrors can be added here or in separate files
# - repositories listed first will take precedence when packages
# have identical names, regardless of version number
# - URLs will have $repo replaced by the name of the current repo
# - URLs will have $arch replaced by the name of the architecture
# Repository entries are of the format:
# [repo-name]
# Server = ServerName
# Include = IncludePath
# The header [repo-name] is crucial - it must be present and
# uncommented to enable the repo.
# The testing repositories are disabled by default. To enable, uncomment the
# repo name header and Include lines. You can add preferred servers immediately
# after the header, and they will be used before the default mirrors.
[archlinuxfr]
Server = http://repo.archlinux.fr/$arch
#[testing]
#Include = /etc/pacman.d/mirrorlist
[core]
Include = /etc/pacman.d/mirrorlist
[extra]
Include = /etc/pacman.d/mirrorlist
#[community-testing]
#Include = /etc/pacman.d/mirrorlist
[community]
Include = /etc/pacman.d/mirrorlist
# If you want to run 32 bit applications on your x86_64 system,
# enable the multilib repositories as required here.
#[multilib-testing]
#Include = /etc/pacman.d/mirrorlist
[multilib]
Include = /etc/pacman.d/mirrorlist
# An example of a custom package repository. See the pacman manpage for
# tips on creating your own repositories.
#[custom]
#SigLevel = Optional TrustAll
#Server = file:///home/custompkgs

Configuration file not found jbo-33005

I am stumped, I have an application created in JDeveloper and using jakarta-struts. When I try to update the database, I get the following error: JboException: JBO-29000: unexpected exception caught: ...JBO-33005: Configuration ApplicationModuleLocal not found.
The JBO-33005 documentation says: This exception is thrown when the named Configuration is not found in the bc4j.xcfg file.
Action: Make sure the name of the configuration is correct.
I have doubled checked and the name is correct, the bc4j file is in the class path, etc.
Does anyone have any suggestions on how to correct this error?
Thank you in advance.

Hi Keith, we're over here in my beloved OS9 forum, but actually you need to maybe post over here in 10.4.x/Tiger forums...
http://discussions.apple.com/forum.jspa?forumID=758
http://discussions.apple.com/post!default.jspa?forumID=758
Not that we couldn't probably answer it here, but to avoid confusion to others, I think it'd be to your benefit!

Restore command fails with "target not found.

Hi,
Can you help me explain what does the following output means and the possible way to clean it up? It doesn't look like to be a controlfile not in sync problem and the "change archivelog '..' uncatalog' reports file not found in controlfile. I have trouble finding out the root cause of this "restore failure" for archivelog. The "report unrecoverable" show no record. Thanks.
This is 9iR2 under archivelog mode with weekly full backup. Recovery windows is set to 7 days.
1)RMAN> restore archivelog all validate;
===========================================================
RMAN-03002: failure of restore command at 08/22/2005 12:07:24
RMAN-06026: some targets not found - aborting restore
RMAN-06025: no backup of log thread 1 seq 1844 scn 133107107 found to restore
RMAN-06025: no backup of log thread 1 seq 1843 scn 132994888 found to restore
RMAN-06025: no backup of log thread 1 seq 1842 scn 132653855 found to restore
RMAN-06025: no backup of log thread 1 seq 1841 scn 132328870 found to restore
2) SQL> select name,archived,deleted,status from v$archived_log where sequence# in (1844,1843,1842,1841);
NAME
ARC DEL S
/u05/hotbk/arch_1_1841.arc
YES YES D
/u05/hotbk/arch_1_1842.arc
YES YES D
/u05/hotbk/arch_1_1843.arc
YES YES D
/u05/hotbk/arch_1_1844.arc
YES YES D
3) These archivelog files already gone from the file system.
4) list expired backup and delete expired backup has been done.
5) delete obsolete has been done.
6) RMAN> change archivelog '/u05/hotbk/arch_1_1842.arc' uncatalog;
===========================================================
RMAN-03002: failure of uncatalog command at 08/22/2005 12:07:02
RMAN-20240: archived log not found in the recovery catalog
RMAN-06046: archive log name: /u05/hotbk/arch_1_1842.arc

Did you tried to execute: restore archivelog from scn 1 validate; ?
It can be the problem: Note:110160.1 - RMAN-06026 RMAN-06025 Restore Archivelogs Seperately: https://metalink.oracle.com/metalink/plsql/ml2_documents.showDocument?p_database_id=NOT&p_id=110160.1
Bye, Aron

Administration for Servers No Content Servers Found.

When I click on Admin server in Oracle content management server, Admin server page is getting loaded and I am getting "Administration for Servers
No Content Servers Found." message on admin server page. Please suggest

For some reason...
The Admin Server can not find a list of Servers to manage. This could be because someone removed them via this interface or deleted them from the file system or...lots of other reasons probably.
There is an option to add servers which is basically a wizard. As long as you know the install directory this should be pretty simple.
HTH
Tim

Error: target not found: package-query =1.0 although I have it

I used to work on Arch but it was installed for me by a friend, now I decided to install it on my own and it was a success! But when I tried installing yaourt it didn't work. I know that it needs package-query so I installed it, but when I try to build yaourt it fails..
[clairka@clairka yaourt]$ makepkg -s
==> Making package: yaourt 1.3-1 (Thu Aug 22 00:37:27 UTC 2013)
==> Checking runtime dependencies...
==> Installing missing dependencies...
[sudo] password for clairka:
error: target not found: package-query>=1.0
==> ERROR: 'pacman' failed to install missing dependencies.
So I tried to rebuild package-query
[clairka@clairka package-query]$ makepkg -s
==> ERROR: A package has already been built. (use -f to overwrite)
Even if I use -f to overwrite I get always the same output. Does anybody know how to fix this? I was really used to use yaourt to install packages from AUR. Thanks.
Last edited by clairka (2013-08-21 22:47:37)

clairka wrote:Ahh... silly me, thanks a lot! And now I can delete the tar.xz file, right?
Sure.

[SOLVED] yaourt bug (error: target not found: [b]I )

subj, after install and uninstall xampp
yaourt -S xampp
==> Installing from a package list
Пароль:
error: target not found: {b}I
*in quote changed [] to []
maybe clear package list?
I tried:
yaourt -Syu
yaourt -Syua
yaourt -Scc
rm /tmp/yaourt-tmp-$USER
reinstall yaourt
but fail
other soft installing normally
yaourt -Syy is the solution
Last edited by Shara (2012-09-05 05:01:21)

Just so you know, a bug is typically not something that only you experience. I just want to ensure that you aren't filing bug reports for things that are only occuring on your machine and not a systemic issue within the utility itself.

JDEV11 - No SOA configured Target Servers found!

Similar Messages

Maybe you are looking for