JDeveloper 10.1.3.4.0: Where is value of 'output.dir' specified?

I autogenerated a build.xml file for my project using the "Ant --> Buildfile from Project" wizard.
Where in JDeveloper is the location of the following property specified?
output.dir
Thanks,
Jonathan

Just found it:
build.properties
Thanks,
Jonathan

Similar Messages

Where to see the output of my Application Engine Program ?

Folks,
Hello. I am creating my first AE program in Application Designer and test it in the 2-tier mode. I open the AE program in Appication Designer and click Edit ->Run Program. Then open the log file to see its execution and know the AE program is running out. But I don't know where to see the output of the AE program.
The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
Do any folks know where to see the output of the AE program ?
Thanks in advanced.

The AE program is only executing a SQL "select" statement. Its output is the ResultSet of the SQL.
Do any folks know where to see the output of the AE program ?The output of the select didn't go anywhere. You have to actually do something with the values selected. App Engine selects them and puts them in memory (if you tell it to through %Select), but where those values go depends on you. If you have a DoSelect, then your next action may be an SQL insert/update/delete or even another %Select. If it is another %Select, then I would expect your next action to be Call Section or PeopleCode.
If you just want to select data and print it to the app engine log file, then I would setup a step with a DoSelect/%Select and then a PeopleCode action. In your PeopleCode action, use MessageBox(0, "", 0, 0, "The value in field MYFIELD is " MYREC_AET.MYFIELD);
I wrote a blog post a few years ago with additional tips and tricks for AppEngine output: http://jjmpsj.blogspot.com/2008/05/appengine-output-tricks-reporting.html.

Purchase Order ME23n - communication tab - where these values stored

Dear all
Can someone tell me where the
Purchase Order ME23n - communication tab - where these values stored
I am not able to find it.
Regards,
Venkat

Table EKKO. All fields in communication tab are available here
EKKO-IHREZ Your Reference
EKKO-VERKF Responsible Salesperson at Vendor's Office
EKKO-TELF1 Vendor's Telephone Number
EKKO-UNSEZ Our Reference

Where the value of systimestamp/sysdate comes from and dbms_scheduler

I saw bunch of other posts but I could find the post that exactly explaining about where the value returned as systimestamp/sysdate comes from or impacted or I’m missing something and need some help.
Here is my situation
I have an access to this db (let me call db A) and when I access it, I get following result. I don’t have full access to this db so I cannot experiment a lot here.
SYSTIMESTAMP CURRENT_TIMESTAMP LOCALTIMESTAMP DBTIMEZONE SESSIONTIMEZONE
27-MAR-13 02.31.55.041411 AM +00:00 26-MAR-13 07.31.55.041416 PM -07:00 26-MAR-13 07.31.55.041416 PM +00:00 -07:00
I’m in PST timezone.
I have my db which I have full access as well as its host.
I can make result like db A on my db if I started up db and its listener while TZ environment variable equal to UTC.
Now I saw in other post that someone was trying to retrieve systimestamp value in a job executed via dbms_scheduler.run_job.
So I did that in two ways. 1 with use_current_session = true and 2 is false for the same.
On my db, results are the same (both returns time in UTC) but on db A, I got UTC time when use_current_session = true and PST when use_current_session = false.
So questions are:
What could be the difference in setup between my db and db A?
Is there a query, logfile, or anything I should check to find out what can be the difference?
Any clue about where to check will be appreciated as well and please let me know if there is some additional information necessary to provide me some help on this.
I tried to find the cause with my db and I could see the same result as db A which is to see UTC time if use_current_session = true and PST time if use_current_session = false by bringing up the db listener after I set TZ environment variable equal to PST8PDT. However this causes systimestamp from sqlplus session become also a PST time.
The reason I’m playing around with the setup and checking systimestamp value is because we are facing the situation where everywhere except pl/sql job submitted by enterprise scheduler service is pointing wrong timezone (PST instead of UTC) and I’ve been searching the solution or clue for where to look at.

Hi Stephen,
I think your first thought about using a javascript timer, call an APEX application process to get the new value and finally set it in the page 0 item would be the way I would take. :)
+"Also, the message shown may vary depending on who is logged in, i.e. the user session. More than user is logged-in at the same time."+
In case you use an application process this shouldn't be any problem.
Some useful links: [Carl Backstrom's example|http://apex.oracle.com/pls/otn/f?p=11933:11]
[My example application includes similar ways of using js and application processes|http://apex.oracle.com/pls/otn/f?p=65555:1]
Best regards,
Tobias
[http://apex-at-work.blogspot.com/|http://apex-at-work.blogspot.com/]

Query to delete row where column value contains alphabets

Hi,
Could anyone please help me to get this query work.
Query to delete row where column value contains alphabets.
DELETE FROM BIN_ITEM WHERE order_nmb LIKE '%[A-Z]%' || LIKE '%[a-z]%'
Thanks and Regards,
Deekay.

RaminHashimzadeh wrote:
SELECT order_nmb FROM BIN_ITEM WHERE regexp_count(order_nmb,'[0-9]') = 0
Ramin Hashimzade
But that won't reject strings like 'gfgG%dgh' which aren't pure alphabetic.
Try:
with test_data as (
select 'ghTYJYEhdfe' str from dual
union
select 'dfF5ssd' from dual
union
select 'rgth*dgheh' from dual
union
select 'ggf{' from dual
union
select 'rwhrhrh' from dual
select *
from test_data
where regexp_instr(str,'[^[:alpha:]]')=0;

How do I change where reader installs, ie drive/dir

how do I change where reader installs, ie drive/dir
it won't install cause it thinks it is installing on a network dive that no longer exists

I think this is not about the install drive, but one of your other folders. Commonly MY PICTURES is moved to an external drive. (You can check this).

Readonly table with where clause value from previous page

Hi
I am using jdeveloper 10.1.3.
I have a globalhome page where the user enteres a reference number. i have a backing bean for the globalhome page that runs a method to run an sql that seraches for this reference number, if the reference number exsits the user is directed to a detail page.
this detail page should display details of this reference number.
i have set up a read only table to display this data based on a view object with a bind varaible in the where clause.
however i am unsure how to set this bind varaible value to the reference entered in the first globalhome page.
please can anyone advise how to do this.
regards

Hi,
You can follow following steps to achieve this
1) Write a custom method in your Application module like
public void executeMyVO(String bindVarValue)
MyVOImpl vo= getMyVo();
vo.setNamedWhereClauseParam(<bind variable name decalred in VO>,bindVarValue);
vo.execute();
2) Expose the above method to client. (Right click AM-->Client-->Shift method from left to right)
3) In the pagedef of globalhome page, create a method action for the aboce created custom method
4) execute the method action from your backing bean after you run an sql that seraches for this reference number.
Hope this help.
Vikram

XML Publisher: where's XML Publisher output?

Hi,
The XML file created by report is in FND_Concurrent_Requests.outfile_name.
Where's the XML Publisher output?
I want copy the file generated (PDF or EXCEL) using utl_file.fcopy because bursting fail whe template is Type=>XSL-XML.
Do your guys have any suggestion with this case? any input is very appreciated.
thanks in advance
Robert

Welcome to the forums !
Pl see if MOS Doc 305307.1 (How To Modify Print PO Report POXPOPDF With Custom Template) can help
HTH
Srini

How to know where the value of a field in an IDoc is saved?

Hello SAPients!
I'm working in ECC 6.0. I have an Inbound Idoc of type WPUBON01. In the segment E1WPB01it has a field named BONNUMMER. My question is: How can I know what TABLE-FIELD is being populated with the value of that field? I mean, is there a way to know the mapping of the fields of an IDoc?
Thank you in advance for your kind help.

Hi,
The table name is WPLST
I did the following..
Go to the segement structure in SE12..
Double click on the data element for that corresponding field..
Then put a where used-list for that data element...To search in tables..
I got the table WPLST.
Thanks,
Naren

How to find out where a value is stored

Hi,
i entered something in HR Area infotyp 0031, i expected to find those entries in table pa0031, but this table remains empty. How can i find out where sap stores those values?

press F1 on the field where u typed the value. click on technical info and get the table and field name.
in most cases it might be structure. either way, go to se11 and type the table/structure name and then search for the field name in that table.
then dbl click on the data element and click on the where-used button.
now select table entries and start looking for all the tables where the field is present. go to each table and check for the number of table entries and see if the value u entered has been caputred in that table or not.
hope that helps.
else u can revert back
regards,
pk

From where are values of BEB CESS ECS captured in J1IIN for Export

Hi ,
In export sale,we dont mention BED CESS ECS condition type in pricing procedure.
While creating J1IIN we get excise details of BED CESS ECS in excise invoice.
From where does this value come.
parsad

Hi,
In the export pricing procedure, BED,ECS,SECess condition types are marked STATISTICAL and hence it is not accounted.
The values are captured for printing ARE-1 form only.
Regards,
Anbu

Where can I see output from ClassInitialize and ClassCleanup

Hi,
If I write
TestContext.WriteLine("Some output")
or
Console.WriteLine("Some output")
inside a test method, i see an "output" link in the Test Explorer and when I click it I can see the output "Some output". This is also true when I do it from a [TestInialize], [TestCleanup] and even [AssemblyInitiailize] or [AssemblyCleanup]
methods. However, if I do that from a [ClassInitialize] or [ClassCleanup] methods - I can't see the output.
Is there any reason for that? How/where can I see any output that I write inside ClassInitialize?
AFAIR, in VS2010 I was able to see that from a link on the Test Results pane, but I currently don't have VS2010 installed to verify it.
Thanks,
Arnon.
Arnon Axelrod

Hi Arnon,
>>I checked it again, and I realize that it works OK for regular MSTest classes (with [TestClass] attribute), but not for Coded UI (with [CodedUITest] attribute).
I think I could repro this issue in my side, I get the same issue as yours using the VS2013 with the latest update package, it doesn't support it in Coded UI tests even if I enable the detailed coded UI test log:
https://msdn.microsoft.com/en-us/library/jj159363.aspx
To get the issue confirmed and diagnose by product team, would you please create connect report for it? You will get email notification for update.
http://connect.microsoft.com/VisualStudio/feedback/CreateFeedback.aspx
If you submit the report, please share us the link here, I will help you vote it.
Best Regards,
Jack
We are trying to better understand customer views on social support experience, so your participation in this interview project would be greatly appreciated if you have time. Thanks for helping make community forums a great place.
Click
HERE to participate the survey.

How to track that, from Where the value is EXPORTing to MY_MEMORY_ID

Hello,
Previous programmer is IMPORTing some value into a variable from MY_MEMORY_ID, fine, this is happening in a Customer- Function of Purchase Req.
But, I do not know, From where he is EXPORTing that value? pls. let me know, How to track/How to know from Where he is EXPORTing?
I hv seen any comments/documentation of that user exit, I hv searched GLOBALLY for that memory ID in PO prog./Purchase Req. prog./Sales order prog!! but, did not find it!!
Is there any table to store this data(EXPORT/IMPORT), i do not think so!! bcoz, its run time/buffer!!
thank you

thank you.
After coming to home, I got the same thought.....again thout that, there might b 2 concerns, like,
1 - we put these memory IDs in SINGLE quotes, like "MY_MEMORY_ID", so, in this case, that std. SAP prog. is really scans?
2 - this client SAP system is a Monster!! so, i do not know, is it goes to outtage!!
thank you

Where should handling unit output determination procedure be assigned ?

Hi
In logistic execution, where should handling unit out put determination procedure be assigned pls ?
Thanks In Advance

A custom output type must be created with the form you would like to print and condition records for HU's must be maintained in VV61.
You can also use NACE to define the procedures and access sequence.
Hope that helps
thanks

By default where does report write output files on web server

I am running forms and reports over web. I am running a form which on the click of a button runs a report. Using the
Orarrp utility (I already have) I want to print this report.
In my form trigger I am using the run_report_object and I set report parameters DESTYPE to File, and I set
DESNAME giving it a file name. When report finishes, I use Show_Document('http://server:domain/filename.ext','_blank'),
it returns the 404 error, The requested URL /receipt.rrpa was not found on this server.
Can anyone tell me, by default where the server writes the file output? I have checked under
$ORACLE_HOME/reports60/server/cache but did not find my output file.
Is there a way to specifically direct the output file to a directory, and have the reports server recognize the path?
Perhaps using some sort of 'Virtual Path' in the server configuration, but where?
Any help is appreciated?
Regards
Mark

Hi,
destype file writes the file to wherever you send it to.
destype=file desname = c:\temp\myRep.html
creates the file myRep.html in the temp directory on the server. Destype 'cache' only writes to the Cache directory you mention. normally, if not giving any directory information, it's the working directory that the file gets created in. Do a seacrh for your file and I am sure that you'll find it.
regards Frank

JDeveloper 10.1.3.4.0: Where is value of 'output.dir' specified?

Similar Messages

Maybe you are looking for