JMS Adapter Fail - Receiver channel. Details: Receive timed out
Its an IDOC to JMS scenario. IDOC gets processed through the pipeline in XI successfully, can see the checkered flag.
However in Adapter monitoring, JMS adapter is in red.
The error text against the Communication Channel is "Receiver channel. Details: Receive timed out".
I am trying to connect to the JMS queue provided by a third party on port 1100 ( as configured in JMS adapter).My initial analysis is to check if the port is open on the third party's firewall( Need to get the response back from them yet).
However i would like to know, if there is something else that i should look into?
Following are the error messages in RWB audit log for the message sent.
Exception caught by adapter framework: The JMS channel with channel ID 3f307d6854683859b39f978a43e88872 is errornous. Details:Receive timed out
Error Delivery of the message to the application using connection AFW failed, due to: The JMS channel with channel ID 3f307d6854683859b39f978a43e88872 is errornous. Details:Receive timed out.
what might be the problem?
Similar Messages
-
when i send a test message throw the RWB for Http receiver adapter it is giving the error "Error in processing caused by: com.sap.aii.adapter.http.api.HttpAdapterException: ERROR_SOCKET_TIMEOUT, Read timed out"
Hi, Michal
I have read your Weblog. It makes sense to me. Thanks a lot for your help! However, I still have some questions and listed them as following. Could you please help to answer them?
<b>Q1:</b> I am new to SAP-XI. So I have no idea about TCODE-SXMB_ADM. Could you introduce more details about it?
<b>Q2:</b> The XI system I am using is running on SAP-ICC's machine. The tools I can use are:
<b>1.</b>Builder for Integration Repository
<b>2.</b>Builder for Integration Configuration
<b>3.</b>System Landscape Directory
<b>4.</b>Runtime Workbench
<b>5.</b>Administration System (for Repository, Directory, Runtime)
Please note that I do not have a complete control on this SAP-XI. Do you think whether or not I can set the timeout parameter by following the instructions provided in your Weblog?
For more details about my SAP-XI, please access the following Web page:
http://iccxi.sap.com:58000/rep/support/admin/index.html
<b>Q3:</b> The following messages are extracted from the SAP-XI. Wish they are hepful to solving my problem.
2006-06-19 05:12:16 Success The message was successfully received by the messaging system. Profile: XI URL: http://iccxi.sap.com:58000/MessagingSystem/receive/AFW/XI
2006-06-19 05:12:16 Success Using connection AFW. Trying to put the message into the request queue.
2006-06-19 05:12:16 Success Message successfully put into the queue.
2006-06-19 05:12:16 Success The message was successfully retrieved from the request queue.
2006-06-19 05:12:16 Success The message status set to DLNG.
2006-06-19 05:12:16 Success Delivering to channel: ValidationRequestHandlerServiceChannel
2006-06-19 05:12:16 Success SOAP: request message entering the adapter
2006-06-19 05:12:37 Success SOAP: call failed
2006-06-19 05:12:37 Error SOAP: error occured: java.net.ConnectException: Connection timed out: connect
2006-06-19 05:12:37 Error Exception caught by adapter framework: Connection timed out: connect
Thanks
Menghua Li -
Hello
We have One Admin and 2 Mananged server on same machine.
It is a quad server.
With 2 NICs.
Managed Server is giving this error.
<Jul 22, 2002 10:55:54 AM CDT> <Error> <Cluster> <Multicast socket
receive error
: java.io.InterruptedIOException: Receive timed out
java.io.InterruptedIOException: Receive timed out
at java.net.PlainDatagramSocketImpl.receive(Native Method)
at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java
:90)
at java.net.DatagramSocket.receive(DatagramSocket.java:404)
at weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:145)
at weblogic.cluster.MulticastManager.execute(MulticastManager.java:298)
at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
>
Also on weblogic console
Cluster - > Monitoring - > Monitor Server Participation Panel
shows that both our managed servers are part of the cluster..
But only Sent Frames has data.. Receive frame does not seem to be
working.
I tried MultiCastTest Utility in 2 different dos prompts and seems to
be working. (both windows shows send/receive).
Though i am not sure if it will work for a quad / 2NIC machine..
As utility does not take IP address of the server.
thanks
that is right.
we fixed it.. we tried running multicast test and it failed
so we had to fix our network settings and got multicast working.
also due to multiple NIC card we had to set "interface" address
which we had not done while working with single NIC machines
in clustered mode.
thanks
Kumar Allamraju <[email protected]> wrote in message news:<[email protected]>...
> I have seen this error once when the multicastddress is not properly setup.
> Can you try a different multicastAddress and see if that makes any difference?
>
>
> zevit wrote:
>
> > Hello
> >
> > We have One Admin and 2 Mananged server on same machine.
> > It is a quad server.
> > With 2 NICs.
> >
> > Managed Server is giving this error.
> >
> > <Jul 22, 2002 10:55:54 AM CDT> <Error> <Cluster> <Multicast socket
> > receive error
> > : java.io.InterruptedIOException: Receive timed out
> > java.io.InterruptedIOException: Receive timed out
> > at java.net.PlainDatagramSocketImpl.receive(Native Method)
> > at java.net.PlainDatagramSocketImpl.receive(PlainDatagramSocketImpl.java
> > :90)
> > at java.net.DatagramSocket.receive(DatagramSocket.java:404)
> > at weblogic.cluster.FragmentSocket.receive(FragmentSocket.java:145)
> > at weblogic.cluster.MulticastManager.execute(MulticastManager.java:298)
> > at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:139)
> > at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:120)
> > >
> >
> > Also on weblogic console
> >
> > Cluster - > Monitoring - > Monitor Server Participation Panel
> > shows that both our managed servers are part of the cluster..
> > But only Sent Frames has data.. Receive frame does not seem to be
> > working.
> >
> > I tried MultiCastTest Utility in 2 different dos prompts and seems to
> > be working. (both windows shows send/receive).
> > Though i am not sure if it will work for a quad / 2NIC machine..
> > As utility does not take IP address of the server.
> >
> > thanks
-
After updating windows 7 and firefox i constantly receive timed out or server not found messages
i constantly receive timed out or server not found messages after updating windows 7 and firefox 2 weeks ago. this was almost never a problem prior to updating
Connection Errors
https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_connection-errors
Interrupted or Reset Connection
https://support.mozilla.com/en-US/kb/Error%20loading%20web%20sites#w_interrupted-or-reset-connection
Check and tell if its working. -
Java GSS API - Kerberos - Receive timed out when requesting service ticket.
Hi,
I'm following the following exercises about Kerberos/JGSS-API :
http://java.sun.com/javase/6/docs/technotes/guides/security/jgss/lab/
On exercise 3, I get an exception (when requesting a service ticket) from the client side:
"+Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentials provided (Mechanism level: Receive timed out)
etc.+"
This seems to happen when the GSSContext.initSecContext(...) method is called.
The server side receives the client connection:
"+Waiting for incoming connection...+
+Got connection from client /xxx.xxx.x.xxx+"
But then displays the following exception:
"+Exception in thread "main" java.security.PrivilegedActionException: java.net.SocketException: Connection reset
etc.+"
I checked my KDC (win 2003 Server SP2) and added SPNs with setspn but the error remains.
Any suggestion are more than welcome !The TGT is already present on my Client machine because it is acquired automaticaly from the KDC during the Windows opening session.
I use then JAAS to access the LSA and obtain the TGT - This doesn't need any further connection to the KDC.
But the Service Ticket is requested to the KDC by my client machine..
Here is the complete output (Client side) after I destroyed the tickets (with Kerberos MIT Leash.exe and/or kdestroy.exe ):
Debug is true storeKey false useTicketCache true useKeyTab false doNotPrompt false ticketCache is null isInitiator true KeyTab is null refreshKrb5Config is false principal is null tryFirstPass is false useFirstPass is false storePass is false clearPass is false
Acquire TGT from Cache
+>>>KinitOptions cache name is C:\Documents and Settings\user.MYDOMAIN\krb5cc_user+
+>> Acquire default native Credentials+
+>>> Obtained TGT from LSA: Credentials:+
[email protected]
server=krbtgt/[email protected]
authTime=20080529135209Z
startTime=20080529135209Z
endTime=20080530015209Z
renewTill=20080702135209Z
flags: FORWARDABLE;RENEWABLE;INITIAL;PRE-AUTHENT
EType (int): 23
Principal is [email protected]
Commit Succeeded
+Authenticated principal: [[email protected]]+
Connected to address host1/xxx.xxx.x.xxx
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri May 30 03:52:09 CEST 2008
Entered Krb5Context.initSecContext with state=STATE_NEW
Found ticket for [email protected] to go to krbtgt/[email protected] expiring on Fri May 30 03:52:09 CEST 2008
Service ticket not found in the subject
+>>> Credentials acquireServiceCreds: same realm+
Using builtin default etypes for default_tgs_enctypes
default etypes for default_tgs_enctypes: 3 1 23 16 17.
+>>> CksumType: sun.security.krb5.internal.crypto.RsaMd5CksumType+
+>>> EType: sun.security.krb5.internal.crypto.ArcFourHmacEType+
+>>> KrbKdcReq send: kdc=yyy.yyy.y.y UDP:88, timeout=30000, number of retries =3, #bytes=1262+
+>>> KDCCommunication: kdc=yyy.yyy.y.y UDP:88, timeout=30000,Attempt =1, #bytes=1262+
SocketTimeOutException with attempt: 1
+>>> KDCCommunication: kdc=yyy.yyy.y.y UDP:88, timeout=30000,Attempt =2, #bytes=1262+
SocketTimeOutException with attempt: 2
+>>> KDCCommunication: kdc=yyy.yyy.y.y UDP:88, timeout=30000,Attempt =3, #bytes=1262+
Exception in thread "main" java.security.PrivilegedActionException: GSSException: No valid credentials provided (Mechanism level: Receive timed out)
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at javax.security.auth.Subject.doAs(Subject.java:396)+
+ at SimpleAuthzz2.loginAndAction(SimpleAuthzz2.java:56)+
+ at SimpleGssClient.main(SimpleGssClient.java:36)+
SocketTimeOutException with attempt: 3
Caused by: GSSException: No valid credentials provided (Mechanism level: Receive timed out)
+ at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:659)+
+ at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:213)+
+ at sun.security.jgss.GSSContextImpl.initSecContext(GSSContextImpl.java:158)+
+ at SimpleGssClient$GssClientAction.run(SimpleGssClient.java:121)+
+ ... 4 more+
Caused by: java.net.SocketTimeoutException: Receive timed out
+ at java.net.PlainDatagramSocketImpl.peekData(Native Method)+
+ at java.net.DatagramSocket.receive(DatagramSocket.java:662)+
+ at sun.security.krb5.internal.UDPClient.receive(UDPClient.java:77)+
+ at sun.security.krb5.KrbKdcReq$KdcCommunication.run(KrbKdcReq.java:278)+
+ at java.security.AccessController.doPrivileged(Native Method)+
+ at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:195)+
+ at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:140)+
+ at sun.security.krb5.KrbKdcReq.send(KrbKdcReq.java:106)+
+ at sun.security.krb5.KrbTgsReq.send(KrbTgsReq.java:215)+
+ at sun.security.krb5.internal.CredentialsUtil.serviceCreds(CredentialsUtil.java:293)+
+ at sun.security.krb5.internal.CredentialsUtil.acquireServiceCreds(CredentialsUtil.java:106)+
+ at sun.security.krb5.Credentials.acquireServiceCreds(Credentials.java:561)+
+ at sun.security.jgss.krb5.Krb5Context.initSecContext(Krb5Context.java:585)+
+ ... 7 more+
It seems like the TGT is still present in the cache, even if Leash displays "no tickets".
Meanwhile, in the KDC-server side:
-What is the correct spn to add? C:\setspn GssServer/host1 user ? (I in fact tried many possibilities)..
-Is there any other special configuration to do in the KDC ?
Thanks a lot! -
Flow is not going to catch block when JMS adapter fails
In a BPEL composite, we have a JMS adapter to write a message into JMS Queue.
In this error scenario, JMS is down & so JMS adapter fails with the below error. But control is not going to the catch block where we have some logic to construct a error response. Why?
Global retry rollback fault thrown.
The current JTA transaction is aborting due to an user rollback fault being thrown. The upstream component should retry in a new JTA transaction upon catching this fault.
This exception was caused by a global retry fault being thrown from downstream component. The user had directed the BPEL engine to roll back the current JTA transaction and retry within new JTA transactions for the specified number of times and retry interval.
There is no action recommended.
BINDING.JCA-12563
Exception occured when binding was invoked.
Exception occured during invocation of JCA binding: "JCA Binding execute of Reference operation 'Produce_Message' failed due to: ERRJMS_PROVIDER_ERR.
ERRJMS_PROVIDER_ERR.
Unable to produce message due to JMS provider internal error.
Please examine the log file to determine the problem.
The invoked JCA adapter raised a resource exception.
Please examine the above error message carefully to determine a resolution.Hi,
This is similar to JTA issue from below post.
CatchAll block not catching JTA timeout with XA datasource. Try the suggestion given by Riaan and see if it helps.
Regards,
Sai -
Hi PI gurus,
Need some suggestions on one issue below -
Scenario - proxy (SAP) to SOAP (Web based system)
In the RWB Communication Channel Monitirong we are receiving the below error
" Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK"
the request from XI system is going to target system and printing the lables (as per the functionality) with no issues but the comminication channel is giving the above error and this is causing the repeated sending the same request to target sytem and the data is printing repeateadly. This issues is occuring in Quality environment.
Strangley the same Interface with the same connectivity details is working fine in Development environment. But not working in Quality environment. Checked the firewalls settings on both in XI and Target system side and confirmed that everything is fine.
Below are the Logs both from Quality and developement are as follows
Quality ( Failure Case)
17.03.2011 07:19:59 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:25:03 Error SOAP: call failed: java.io.IOException: Read timed out; HTTP 200 OK
Development (Success ful)
17.03.2011 07:27:55 Success SOAP: request message entering the adapter with user J2EE_GUEST
17.03.2011 07:27:58 Success SOAP: completed the processing
When we checked with basis team on user id J2EE_GUEST, they confirmed that they are same in Development and Quality.
I repeat,, that the same target url and everthing is same in XI Configuration
Thanks in Advance. Points would be rewared for the best solution.
Thanks,
JitenderHI Jitender,
If your scenariois working in DEV and if it is not working in QAS.Could you please check if both the systems are at same patch levels..
Please refer below notes :1551161,817894,952402.
Cheers!!!
Naveen. -
ServiceRequestException : The request failed. The operation has timed out
I wrote simple client using EWS Managed API. And let it run for one night. It was working fine. But when I checked it back in the morning, I found my application stopped. I checked logs I got following exception:
2014-01-08 01:49:05.3649 | Error | Exception while fetching mails : The request failed. The operation has timed out | MyNamespace.MyClass.myMethod
Immediate Stack Trace
===================================================================================
Microsoft.Exchange.WebServices.Data.ServiceRequestException : The request failed. The operation has timed out
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.ValidateAndEmitRequest(IEwsHttpWebRequest& request)
at Microsoft.Exchange.WebServices.Data.SimpleServiceRequestBase.InternalExecute()
at Microsoft.Exchange.WebServices.Data.MultiResponseServiceRequest`1.Execute()
at Microsoft.Exchange.WebServices.Data.ExchangeService.InternalLoadPropertiesForItems(IEnumerable`1 items, PropertySet propertySet, ServiceErrorHandling errorHandling)
at Microsoft.Exchange.WebServices.Data.ExchangeService.LoadPropertiesForItems(IEnumerable`1 items, PropertySet propertySet)
at MyNamespace.MyClass.myMethod() in c:\MyProject\MyClass.cs:line 190
Inner Exception 1 : Stack Trace
The operation has timed out
at System.Net.HttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.EwsHttpWebRequest.Microsoft.Exchange.WebServices.Data.IEwsHttpWebRequest.GetResponse()
at Microsoft.Exchange.WebServices.Data.ServiceRequestBase.GetEwsHttpWebResponse(IEwsHttpWebRequest request)
Since the Exception message did not contain error code that Exchange server usually returns like (401) Unauthorized or (403) Forbidden, I am unable to pinpoint any reason for this to occur, since the functionality worked perfectly several times before
this exception occurred as I can check in my logs. Also my diagnostic class which runs on the occurrences of any exception immediately tried to ping exchange server and re-initialize ExchangeService object. When I checked diagnostics logs after this exception
time for the result of diagnostics, then it was able to ping the exchange server and the ExchageServer object also initialized successfully. So I am out of any reason now.
The exception occurred on the last line of the following code:
ItemView itemView = new ItemView(100, 0);
FindItemsResults<Item> itemResults = null;
PropertySet psPropSet = new PropertySet(BasePropertySet.IdOnly);
itemView.PropertySet = psPropSet;
PropertySet itItemPropSet = new PropertySet(BasePropertySet.IdOnly)
ItemSchema.Attachments,
ItemSchema.Subject,
ItemSchema.Importance,
ItemSchema.DateTimeReceived,
ItemSchema.DateTimeSent,
ItemSchema.ItemClass,
ItemSchema.Size,
ItemSchema.Sensitivity,
EmailMessageSchema.From,
EmailMessageSchema.CcRecipients,
EmailMessageSchema.ToRecipients,
ItemSchema.MimeContent
itemResults = service.FindItems(WellKnownFolderName.Inbox, itemView);
if (itemResults.Items.Count != 0)
service.LoadPropertiesForItems(itemResults.Items, itItemPropSet);
Any guesses why this could have happened? Or just some random network congestion? Am I forgetting to log some more information. Should I also log Exception.Data or something else?The timeout is occurring on the client so it not a particular error that's being returned by the server.
The default timeout with the EWS Managed API is 90 seconds and is set on the ExchangeService Object. You can set this to a higher value eg to set it to 5 minutes
server.timeout = 300000;
Why it fails ? if its overnight then Backups can be the cause eg if they are snapshotting the server or some other backup mechanism could mean the server is very busy for a time. Or any other number of specific environmental factors. This is really
a job for your Network admin to determine with server and network monitoring. I would suggest you check the EWS.Log on the Exchange server to see what happened at that time.
What you should do at a code level is handle the exception, I would suggest wait for 60 seconds after the exception (this will cater for most throttling issues) and then try the same request again. If it fails again after a pause then
you generally have a larger problem.
Cheers
Glen -
Disk Erase failed with the error- Operation timed out
I've checked my computer- Mac Book White in Apple store, everything is fine just the hard disk has been corrupted. Needed to erase and reinstall. By the time I wanted to erase it, I can't erase and appears "Disk Erase failed with the error- Operation timed out".
Anyone knows how to solve this question would be nice.
ThanksWell give this a try:
Repairing the Hard Drive and Permissions
Boot from your OS X Installer disc. After the installer loads select your language and click on the Continue button. When the menu bar appears select Disk Utility from the Installer menu (Utilities menu for Tiger, Leopard or Snow Leopard.) After DU loads select your hard drive entry (mfgr.'s ID and drive size) from the the left side list. In the DU status area you will see an entry for the S.M.A.R.T. status of the hard drive. If it does not say "Verified" then the hard drive is failing or failed. (SMART status is not reported on external Firewire or USB drives.) If the drive is "Verified" then select your OS X volume from the list on the left (sub-entry below the drive entry,) click on the First Aid tab, then click on the Repair Disk button. If DU reports any errors that have been fixed, then re-run Repair Disk until no errors are reported. If no errors are reported click on the Repair Permissions button. Wait until the operation completes, then quit DU and return to the installer. Now restart normally.
If DU reports errors it cannot fix, then you will need Disk Warrior and/or Tech Tool Pro to repair the drive. If you don't have either of them or if neither of them can fix the drive, then you will need to reformat the drive and reinstall OS X.
Now download a utility like TinkerTool System or Leopard Cache Cleaner - VersionTracker or MacUpdate - and use it to clear out your system, user, and font caches.
And, try this for the software update issue:
Fix for Software Update
See Troubleshooting Automatic Software Update in Mac OS X.
Delete the following files:
/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/com.apple.SoftwareUpdate.plist
/Home/Library/Preferences/ByHost/com.apple.SoftwareUpdate.xxx.plist
"xxx" is a number.
/Home/Library/Caches/com.apple.SoftwareUpdate/ (delete entire folder) -
How to send alert when receiver JMS adapter fails? Please help!
Hi experts,
I have the following Asynchronous scenario:
SAP R/3 -
>IDOC----->XI>JMS--->BizTalk.
I am sending IDOC from a given SAP R/3 system to XI. XI then sends the same to BizTalk via JMS adapter. In SXMB_MONI the message is successfully processed as it shows checked flag. But if I see the JMS communication channel status in runtime workbench then there it shows error saying JMS queue user id or password not found.
How to send this JMS adapter error as alert?
I also tried configuring alert rule in runtime workbench but still it does not trigger any error.
I have also verified the alert category and everything is fine with that.
What could be the problem? How can I send an alert when an Async adapter fails?
Thanks & Regards,
GopalHi! GOPAL,
Once make sure whther all the below mentioned steps are configured correctly or not ok
1: First make sure whether you are working on SAP XI or PI 7.1
a) If XI you need to create Alerts (ALert Category) in CCMS ABAP stack in the
Tcode. ALRTCATDEF
b) Open the alert category/classification definition environment (transaction ALRTCATDEF).
ensure you are in change mode.
c) In the group box with the alert classifications, right-click All classifications to open the
context menu, and choose Create.
d) Under Classification, enter a name for the classification.
e) Under Description, enter a description of the classification.
f) Save your entries.
g) Then go to RWB-->Go to ALERT Configuation and ADD the RULES to your alert category gor
which created there in the abap stack.
Note Suppose if you want those ALERTS to come to your MAIL then again go to ABAP STACK and go to Tcode. ALRTCATDEF and select your alert category press FIxed Recepients and there give your SAP XI ID's then u can see those alerts in RWB-->ALERT INBOX
Suppoe if you want those to mail then ask the basis team to link your company mail or personal mail ID to your SAP ID.
2. Supppose if you are working on PI 7.1 Server.
Only difference is creating Alert Category...Here you can create your ALERT Classification I mean
alert caltegory in the ESR (Enterprise Service Repository )
Software Component >S CVersion>NameSpace-->Alert Category.
You can configure how u configure there in abap stack such as long and short text every thing
except Fixed Receipients you need to give that recepients there only in ABAP STACK.
what ever ALERT CATEGORY you are creating will reflect there in the ABAP STACK
even you can Use these alerts Category in BPM --> CONTROL STEP -->Configure here in this step
You can also reach alerts like this.
NOTE Most Important point is You can also view your mails or Alerts in the T Code:: SOST.
Regards:
Amar Srinivas ELi -
JMS adapter fails to open IBM WebSphere MQ Manager V6 Remote Queue
Hello,
We are trying to connect to a Remote Queue with the SAP PI 7.0 SP9 JMS adapter to IBM WebSphere MQ V6 on Linux SLES9 x86_64.
We did deployed the JMS-adapter with the V6 native libaries on SAP PI.
In the Communication Channel we use the Adapter Type = JMS, Sender, Transport Protocol = WebSphereMQ(non-JMS).
The MQ Queue Manager is on the same server as SAP PI so we use localhost, Server Port, Queue Manager Name, Channel Name and JMS Queue Name
The <sid>adm user is a member of the mqm group.
When I check the RWB I see this fault message:
Error during channel initialization; exception trace: javax.jms.JMSException: <b>MQJMS2008: failed to open MQ Queue</b> at ...
and also
com.ibm.mq.MQException: <b>MQJE001: Completion Code 2, Reason 2045</b>
When we lookup the reason 2045 we get this explaination on MQ:
MQRC_OPTION_NOT_VALID_FOR_TYPE
We also have a type = Receiver Communication Channel on the same MQ Queue Manager that one is working fine.
Please advise!
Best regards,
Mike LaanenMike,
check whether the Queues are created and activated if it done. then check whether you have authorization for those queues.
Regards
Sreeram.G.Reddy -
"Authentication Failed" and "Your session has timed out" messages
Hi All,
In our implementation, we are using Sun Access Manager 7.0 Patch 6. We noticed that sometimes when we enter invalid credentials, we receive "Authentication Failed" message which we understand is a correct behavior. But sometimes instead of "Authentication Failed", we get "Your session has timed out" message even though we did not go over the module timeout of 2 minutes(i.e. default timeout value in SUN Access Manager).
Is this a known anomaly? Did anybody else have seen this kind of behavior?
Thanks,
JayaI'm having issues too! Help!
-
I installed Oracle 9i (9.2.0.1.0) on a Windows XP machine (the machine is in a domain). There were no errors during the instalation, but I have problems connecting from the same machine using the sid. Here are some examples from a command promt:
D:\>tnsping orcl9i
TNS Ping Utility for 32-bit Windows: Version 9.2.0.1.0 - Production on 31-OCT-20
08 17:43:22
Copyright (c) 1997 Oracle Corporation. All rights reserved.
Used parameter files:
Used TNSNAMES adapter to resolve the alias
Attempting to contact (DESCRIPTION = (ADDRESS_LIST = (ADDRESS = (PROTOCOL = TCP)
(HOST = timisoara01)(PORT = 1521))) (CONNECT_DATA = (SERVICE_NAME = orcl9i)))
TNS-12560: TNS:protocol adapter error
D:\>sqlplus "sys/pass@orcl9i as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 17:54:54 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
ERROR:
ORA-12535: TNS:operation timed out
Enter user-name:If I don't use the sid I can connect:
D:\>sqlplus "sys/pass as sysdba"
SQL*Plus: Release 9.2.0.1.0 - Production on Fri Oct 31 18:05:46 2008
Copyright (c) 1982, 2002, Oracle Corporation. All rights reserved.
Connected to:
Oracle9i Enterprise Edition Release 9.2.0.1.0 - Production
With the OLAP and Oracle Data Mining options
JServer Release 9.2.0.1.0 - Production
SQL>If I go to services I see that the service is running: OracleServiceORCL9I Started.
Thx.Yes, the XP firewall is running. During the Oracle instalation it poped up twice, but I selected 'Unblock'. I can't turn it off because it is running using the domain settings, but I can add exceptions (programs or ports). Port 1521, tnsping or sqlplus are not blocked and there is an option 'Display a notification when Windows Firewall blocks a program' witch is checked.
-
ORA-29273: HTTP request failed ORA-12535: TNS:operation timed out
SQL*Plus: Release 11.2.0.3.0
Solaris 10 SPARC
Hi,
I get the following error when trying to make an HTTP request. Below is the snippet of code I run. I get the error after exactly 60 seconds(default timeout?). I searched through the forums and found many similar errors but nothing that helped me resolve this issue. The problem does not exist in the rest of our environments, only our test environment.
Help is greatly appreciated. Thanks.
DECLARE
p_mid_tier VARCHAR2 (500);
responsestr VARCHAR2 (500);
BEGIN
SELECT *****
INTO p_mid_tier
FROM *****
WHERE profile_type = '*****';
UTL_HTTP.set_wallet ('file://$ORACLE_HOME/network/admin/wallets');
UTL_HTTP.set_transfer_timeout (6000);
UTL_HTTP.set_response_error_check (TRUE);
responsestr :=
UTL_HTTP.request (
UTL_URL.ESCAPE (p_mid_tier || '*****'));
DBMS_OUTPUT.put_line (responsestr);
END;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1722
ORA-12535: TNS:operation timed out
ORA-06512: at line 151001371 wrote:
SQL*Plus: Release 11.2.0.3.0
Solaris 10 SPARC
Hi,
I get the following error when trying to make an HTTP request. Below is the snippet of code I run. I get the error after exactly 60 seconds(default timeout?). I searched through the forums and found many similar errors but nothing that helped me resolve this issue. The problem does not exist in the rest of our environments, only our test environment.
Help is greatly appreciated. Thanks.
DECLARE
p_mid_tier VARCHAR2 (500);
responsestr VARCHAR2 (500);
BEGIN
SELECT *****
INTO p_mid_tier
FROM *****
WHERE profile_type = '*****';
UTL_HTTP.set_wallet ('file://$ORACLE_HOME/network/admin/wallets');
UTL_HTTP.set_transfer_timeout (6000);
UTL_HTTP.set_response_error_check (TRUE);
responsestr :=
UTL_HTTP.request (
UTL_URL.ESCAPE (p_mid_tier || '*****'));
DBMS_OUTPUT.put_line (responsestr);
END;
ORA-29273: HTTP request failed
ORA-06512: at "SYS.UTL_HTTP", line 1722
ORA-12535: TNS:operation timed out
ORA-06512: at line 15
the most frequent cause for TIMEOUT is a FireWall on or between client & server.
when was last time this worked without error?
what changed since then? -
Share to MobileMe fails with QT 10 (request timed out)
I am trying to export a video to my MobileMe gallery. Each time it uploads fine, but at the end of the process I get the error: "The request timed out" and the video doesn't appear in my gallery.
EDIT: I can't upload YouTube videos either. It hangs on "waiting for YouTube to process video". My internet connection is fine.
Message was edited by: BadlydrawnboyI am having a same issue and i can't figure it out. Thing is tho i have to urgently get a quicktime over to a client on east coast! I just did a upload about 3 weeks ago and everything was fine... Now It uploads get to "About 5 sec" hangs there for like an hour and finally tells me
"The file “xxxxx” could not be uploaded to MobileMe. Your MobileMe member name or password is invalid."
I don't know what this glimerblocker is nor do i think i have it unless it came with the system.. Never heard of it before.. Anyone???
Maybe you are looking for
-
Hi, I need to create a Function Module where this FM should send a document as attachment to the internet mail id , example [email protected] Please help me out. Thanks, Pavan.
-
I create a playlist with songs from my library and then try to drag the songs within the playlist to make a different order and they wont change position from how they were originally dragged in. is there a setting i need to check or uncheck to fix t
-
Parent.frame.location problem in firefox
Hello! I'm making a JSP page which opens a new page with 2 frames. The left frame has links which changes the location of the right frame. The right frame either displays an oracle report or another JSP that displays a PDF file. The thing is, I use p
-
Microsoft Word can't start WHY?
Hi From the past few weeks I can't open the Microsoft Word with them message below can you help?
-
Could somebody PLEASE help me?? thankk youu!!!
my iPod is frozen!! does anybody know how to unfreeze it? i have already tried turning the hold button on and off, holding down the select and menu button, etc ... the time is even frozen. it froze on the song title page. if ANYBODY could PLEASE help