JMS C API library for AIX

Does anyone knows where I can locate the library for AIX without having to install Websphere or MQ?

Similar Messages

Deploy api/library

hi all,
we purchased pdflib, that is a product that acts as an api/library for generating and editing pdf files dynamically (written in c /java wrapper). it is possible to integrate this library into any j2ee application server. Now I want to do this , i want to deploy this library into my AS (9iAS release 1) over JDeveloper. I read that this is ´possible .. so how can this be done?

Hello,
I have a similar question...
I have added a 3rd party .jar to my project and checked the jar into cvs.
To get the application to recognize classes in the .jar I've modified my project settings and added the jar as a project library like you mentionned.
My question is: when my colleagues check out the project from cvs, will they have to modify their project settings to add the .jar as a project library?
Or is there some file which lists all the supported libaries which i can modify and check into cvs so my coworkers can simply update from cvs without having to modify their individual project settings?
Thanks
J

JMS C API for AIX

          Hi,
          Is there a version for JMS C API for AIX ? Where can I find it ?
          Thanks,
          Ziv


If your willing to use an untested binary, I suppose you
          might be able to get BEA to compile one for you (the
          majority of work in a new platform port is often just making sure
          that it passes all tests, even if, as is often happens,
          there is a 100% pass rate.) Again, I recommend making
          sure you make a request through customer support and
          make sure that JMS product manager Frazier Miller sees it.
          z wrote:
          > Our project is maintaining few platforms: HP, Solaris, AIX, etc ...
          > Can we have the source of the C API implementation, so we would build it in any
          > requested
          > platform ?
          >
          > Tom Barnes <[email protected]> wrote:
          >
          >>No, just HP, Solaris, and Windows - with official
          >>support (and more platforms) coming in the next
          >>release. If you want an AIX version now, you
          >>can contact customer support and file an enhancement
          >>request. This request should then be forwarded to
          >>the product manager for the JMS C API (Frazier Miller).
          >>
          >>As a work-around for C on AIX you can use rmi-iiop and
          >>a C-based IIOP client - post to the rmi-iiop
          >>newsgroup for details. There are other work-arounds as well.
          >>
          >>z wrote:
          >>
          >>
          >>>Hi,
          >>>
          >>>Is there a version for JMS C API for AIX ? Where can I find it ?
          >>>
          >>>Thanks,
          >>>Ziv
          >>>
          >>>
          >>>
          >>
          >

Problem JMS-c api for message Acknowledgement

Hi,
          I am working in a project that uses bea-JMS C api for
          Communictions.In my project i am using topic messaging for message reciving and sending..Here i am using durablesubscriber for receiving and client Acknowledgement to Acknowledge the message.
          In receiving function I store the message in another JmsMessage for Client-Acknowledgement.
          Here comes one problem that, while i Acknowledge on the receive function each and every message Acknowledge correctly.But while i Acknowledge that message from some other function it return -1 as , that it cannot Acknowledge.The other function is working in another thread.
          Wheather the seprate thread will make the problem for confirmation.

Similar to JDBC connections, JMS sessions and their related child producers and consumers are not thread-safe (with the one exception of the session.close() method).
          For example, without added application level locking, its not safe to acknowledge a message from one thread while another thread receives or produces a message. This has special implications for asynchronous consumers, as once the asynchronous consumer is created, access to the session and objects is limited to code within the "onMessage()" and "onException()" callbacks.
          This behavior is detailed in the JMS specification.
          Tom

Jms c api for weblogic

How to access jms queue of weblogic server from c/c++ application.Can any one provide example for this.I have tried to download jmscapi from
http://dev2dev.bea.com/resourcelibrary/utilitiestools/environment.jsp#jmscapi
but the page is not available.
Details:-
WLS: Weblogic server 10.x
Linux / Windows XP OS
VC++ 2008
++JMS server on WebLogic server 10.x
OSB 10g R3
Please provide where it can be downloaded or if any one can share it.Any help regarding this would be appreciated.

For 8.1, the unofficial dev2dev JMS C-API download is all that I know of. There's also now an official version now packaged with 9.0. Since the official 9.0 version is very close to the unofficial version, I imagine it would work - and would be a bit more up-to-date. But while I'm fairly sure that BEA "officially" supports using the official 9.0 version with a 9.0 client to communicate with 8.1, I don't know if BEA would support using the 9.0 version with an 8.1 client.
I recommend contacting BEA through channels to get the full story (either through sales or support).
Tom

Using an AIX archive file as a library for an external procedure.

I cannot use an archive file, created with the ar command, that contains a shared object that was created with the xlc and ld commands as a library for external procedures. I can use the shared object file created with the ld command as a library for an external procedure. Why would I encounter an invalid magic number and what is the resolution?
Example:
oracle:@husk21:/home/oracle> ksh -x ./Oracle_demo.ksh
+ rm shell.o shell.so shell.so.exp shell.so.imp
+ make -f /u01/oracle/product/11.1.0.7/db/rdbms/demo/demo_rdbms32.mk extproc_no_context SHARED_LIBNAME=shell.so OBJS=shell.o
/u01/oracle/product/11.1.0.7/db/bin/oraxlc -q32 -c -I/u01/oracle/product/11.1.0.7/db/rdbms/demo -I/u01/oracle/product/11.1.0.7/db/rdbms/public -I/u01/oracle/product/11.1.0.7/db/plsql/public -I/u01/oracle/product/11.1.0.7/db/network/public -I/u01/oracle/product/11.1.0.7/db/precomp/public shell.c
generate_export_list() { /bin/nm -X32_64 -B -h -g "$1" | grep -v ' U ' | awk '{print $3}' | egrep -v '^\.|^TOC' | sort | uniq ; }; generate_import_list() { LIB_NAME=$1; IMP_FILE=$2; cat /u01/oracle/product/11.1.0.7/db/rdbms/lib/xa.imp | head -1 | awk '{print $0, "." }' > ${IMP_FILE}; /bin/nm -X32_64 -C -B -h -g ${LIB_NAME} | grep ' U ' | grep -v "::" | grep -v "(" | grep -v "\.cc" | awk '{print $3}' | sed -e "s/\.//g" | grep -v "^_" >> ${IMP_FILE}; }; generate_import_list shell.o shell.so.imp; generate_export_list shell.o > shell.so.exp; /bin/ld -b32 -bnoentry -bM:SRE -bE:shell.so.exp -bI:shell.so.imp -o shell.so shell.o -L/u01/oracle/product/11.1.0.7/db/lib -lc_r -lm
ld: 0711-224 WARNING: Duplicate symbol: .system
ld: 0711-224 WARNING: Duplicate symbol: system
ld: 0711-345 Use the -bloadmap or -bnoquiet option to obtain more information.
oracle:@husk21:/home/oracle> ar rv libshell.a shell.so
ar: Creating an archive file libshell.a.
a - shell.so
oracle:@husk21:/home/oracle> ar tv libshell.a
rwxr-xr-x 3514/3516 1263 Sep 08 10:00 2009 shell.so
oracle:@husk21:/home/oracle> file shell.so
shell.so: executable (RISC System/6000) or object module not stripped
oracle:@husk21:/home/oracle> file libshell.a
libshell.a: archive (big format)
SQL> CREATE OR REPLACE LIBRARY shell_lib is '/home/oracle/libshell.a';
/ 2
Library created.
SQL> CREATE OR REPLACE PROCEDURE shell(command IN char)
AS EXTERNAL
NAME "shell"
LIBRARY shell_lib
LANGUAGE C
PARAMETERS (command string);
/ 2 3 4 5 6 7
Procedure created.
SQL> exec shell('ls');
BEGIN shell('ls'); END;
ERROR at line 1:
ORA-06520: PL/SQL: Error loading external library
ORA-06522: 0509-022 Cannot load module /home/oracle/libshell.a.
0509-103 The module has an invalid magic number.
ORA-06512: at "V500.SHELL", line 1
ORA-06512: at line 1
SQL> CREATE OR REPLACE LIBRARY shell_lib is '/home/oracle/shell.so';
2 /
Library created.
SQL> exec shell('ls');
PL/SQL procedure successfully completed

Using an AIX archive file as a library for an external procedure.

API reference for security library

I've looked for a couple of days and can't find the documentation for the security library that manages signatures and certificates (SAP Security Library for Digital Signatures 5.4).
Where can this be found?

Hi Anthony,
Check these links on your query:
The SAP Security Library (SAPSECULIB):
http://help.sap.com/saphelp_nw04/helpdata/en/b8/821ff4dadd11d2a60a0000e835363f/content.htm
Terminology and Abbreviations:
http://help.sap.com/saphelp_nw04/helpdata/en/af/770b37e54dee2fe10000009b38f889/content.htm
Digital Signatures and Encryption:
http://help.sap.com/saphelp_nw04/helpdata/en/53/251a355d0c4d78e10000009b38f83b/frameset.htm
Secure Store & Forward (SSF) API Specifications:
http://www.sap.com/partners/icc/scenarios/pdf/bc_ssf_api.pdf
Reward points if helpful. *
Regards,
Subhasha Ranjan

JMS C API for linux

          Hi,
          I need the JMS C API for Linux to connect to WLS(WebLogic Server).
          Please let me know whether it is available for linux or not.
          Thanking you in anticipation.
          regards,
          Subodh


          Hi Tom,
          Thanks a lot for the reply ,actually customer has a deadline ,earlier they were
          using JMS C api for windows for using WebLogic JMS ,now they are moving to Linux
          ,so they need JMS C api urgently.
          Please help me ,if possible try to escalate it.
          Again,thanks a lot.
          regards,
          Subodh
          Tom Barnes <[email protected]> wrote:
          >Also note that there are several ways to contact
          >WL from C without using JMS.
          >
          >Subodh Kumar wrote:
          >> Hi,
          >>
          >> I need the JMS C API for Linux to connect to WLS(WebLogic Server).
          >>
          >> Please let me know whether it is available for linux or not.
          >>
          >> Thanking you in anticipation.
          >>
          >> regards,
          >> Subodh
          >>
          >>
          >

Where can I download the JMS C API for WLS 12c?

Where can I download the JMS C API for WLS 12c? It doeesn't appear to be bundled with the standard or supplemental WLS zip files, nor obvious as a separate download bundle. Searching oracle.com finds plenty of documents which reference its existence, but not how to obtain it (unless I missed something). Pointers appreciated, thanks.

Thanks. Unfortunately, that's just a reference to the documentation. As I said, there's lots of reference to the C API in the documentation but I need the source code (I have an existing application running against WLS8.1/Solaris that I want to port to WLS12c/linux).

Solaris JMS C api

          Hello,
          I am having some problems using the JMS C api. The
          call to JmsContextCreate is failing with a -3;
          JMS_JVM_ERROR. The url, username, and password are
          correct and I am passing NULL for the jndiFactory
          to use the deafult Weblogic server context factory
          of "weblogic.jndi.WLInitialContextFactory".
          Setup:
          Solaris 8, Weblogic 8.1 sp1, jdk_141_03, c/c++ client
          using the Studio8 compiler with other third party libraries,
          and the JMS C api obtained from:
          http://ftpna2.bea.com/pub/downloads/jmscapi.ZIP
          The c/c++ client compiles, links, and runs. The
          CLASSPATH and JAVA_HOME environment variables
          have been set accordingly with the JMS C api
          classes directory added to the CLASSPATH.
          I have compiled the c/c++ client with the JMSDEBUG
          defined and it produces the following to stdout/stderr:
          There was an error trying to initialize the HPI library.
          Please check your installation, HotSpot does not work correctly
          when installed in the JDK 1.2 Solaris Production Release, or
          with any JDK 1.1.x release.
          Also the c/c++ client produces another log file
          called "ULOG.pid". Inside this log contains the
          following:
          085910.fusion!?proc.23074.12.-2: 12-01-2003: Weblogic Server Version 7.1
          085910.fusion!?proc.23074.12.-2: LIBJMSC_CAT:15: NLS:6: Message not found, catal
          og LIBJMSC_CAT, set 1, num 15
          It looks like the libjmsc.so library, that is part of
          the jmscapi.ZIP file, is conpiled against an older version
          of jdk and Weblogic. Is there a newer version of the jmscapi.ZIP
          package compiled against a new version of jdk and Weblogic?
          Or is there something going wrong.
          Thanks,
          Keith


It was caused by the 2nd threads' classloader.
          The 2nd thread uses the bootstrap classloader by default when attached to jvm, which loads the 'core' java classes only, not even extended classes.
          <p>
          This cause JNDI factory initialization failed.
          <p>
          The solution is to set the 2nd thread's context loader as the system class loader using JNI. See java.lang.Thread#setContextLoader and java.lang.ClassLoader#getSystemClassLoader.

How can I delete the TemporaryTopic using JMS C API or VC++

Hello everybody,
how can I delete the TemporaryTopic after created TemporaryTopic using JMS C API "JmsSessionCreateTemporaryTopic"?
I checked the document about JMS C API, but I couldn't find any API for delete TemporaryTopic, it's really not existing?
Or if there's any other way that I can delete TemporaryTopic using VC++? Any comments will be appreciated.
Thanks for your help!
Youbing he

As far as I can tell, there's no C-API option for deleting a temporary topic other than to close the connection used to create the temporary topic. Note that it is inefficient to frequently create and destroy temporary topics.
You can get pretty much equivalent performance and functionality with a shared regular topic, non-durable subscriptions, and selectors that take advantage of the "indexed subscriber" optimization. (Consumers specify a selector that is unique to them in the exact form of "MyUniqueID NOT NULL", while publishers send to a specific consumer by adding "MyUniqueID" as a message property. The "X NOT NULL" selector format activates the indexed subscriber optimization.)
Tom
Edited by: TomB on Apr 27, 2010 10:44 AM

Could not load library for database connection LCA

Hi,
I am facing RFC connection prblem while connectiong to database. I have installed SCM5.1 and live cache in single server
Please find the logs.
Work process log:
B Mon Jul 20 11:19:13 2009
B create_con (con_name=LCA)
B Loading DB library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll' ...
M *** ERROR => DlLoadLib: LoadLibrary(E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll) Error 126 [dlnt.c       241]
M          Error 126 = "The specified module could not be found."
B *** ERROR => Couldn't load library 'E:\usr\sap\SC7\DVEBMGS03\exe\dbsdbslib.dll'
[dbcon.c      4731]
B ***LOG BYG=> could not load library for database connection LCA        [dbds#1 @ 1035] [dbds    1035 ]
A
A Mon Jul 20 11:21:58 2009
A GENER starting remote generation: /SAPAPO/OM_SYNC_LC_DB (requested by W1).
B
SM21:
No shared library found for the database with ID LCA|
No shared library found for the database with ID LCA
/SAPAPO/OM17|/SAPAPO/OM_SYNC_LC_DB|K |SAP Web AS Problem|SBAC   |
Documentation for system log message BY G :
As well as the standard connection, an attempt was made to set up
another database connection, under the specified ID. The Shared Library
for this second database could not be found.
The Shared Library is usually found in the the Executable
directory (profile parameter DIR_LIBRARY) under the name dbs
<dbs>slib<os_ext>. <dbs> stands for the database type and <os_ext>
stands for the operating system-specific extension of the Shared
Libraries.
The database type is determined from the entry that corresponds to the
specified DB ID in the table DBDCON. Check whether the data in this
entry is correct.
ST22
Runtime Errors         DBIF_DSQL2_CONNECTERR
Exception              CX_SY_NATIVE_SQL_ERROR
Date and Time          20.07.2009 11:22:21
Short text
Error setting up a secondary database connection
What happened?
Connection to database system not possible with identifier "LCA".
|----
System environment
SAP-Release 700
Application server... "
Network address...... "
Operating system..... "Windows NT"
Release.............. "5.2"
Hardware type........ "8x AMD64 Level"
Character length.... 16 Bits
Pointer length....... 64 Bits
Work process number.. 8
Shortdump setting.... "full"
Database server... "
Database type..... "ORACLE"
Database name..... "SC7"
Database user ID.. "SAPSC7"
Terminal................. " "
Char.set.... "C"
SAP kernel....... 701
created (date)... "Jul 6 2009 23:47:55"
create on........ "NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00"
Database version. "OCI_10201_SHARE (10.2.0.2.0) "
Patch level. 50
Patch text.. " "
Database............. "ORACLE 9.2.0.., ORACLE 10.1.0.., ORACLE 10.2.0.."
SAP database version. 701
Operating system..... "Windows NT 5.0, Windows NT 5.1, Windows NT 5.2, Windows
NT 6.0"
Information on where terminated
Termination occurred in the ABAP program "SAPLSLCAPPS" - in
"LCA_EXISTS_LCA_ROUTINE".
The main program was "/SAPAPO/TS_BATCH_RUN ".
In the source code you have the termination point in line 23
of the (Include) program "LSLCAPPSU05".
The program "SAPLSLCAPPS" was started as a background job.
Job Name....... "MACROS"
Job Initiator.. "SC7GEN"
Job Number..... 10222002
The termination is caused because exception "CX_SY_NATIVE_SQL_ERROR" occurred
in
procedure "LCA_EXISTS_LCA_ROUTINE" "(FUNCTION)", but it was neither handled
locally nor declared
in the RAISING clause of its signature.
The procedure is in program "SAPLSLCAPPS "; its source code begins in line
1 of the (Include program "LSLCAPPSU05 ".
Please help me to resolve the issue.
Suraj

Hi Natalia Khlopina,
I have raised OSS message to SAP.
Below is the information
E:\usr\sap\SC7\SYS\exe\uc\Copy_ of_NTAMD64_15062009>sdbregview -l
Server Utilities    e:/sapdb/programs      7.7.02.08     64 bit    valid
DB Analyzer         e:/sapdb/programs      7.7.02.08     64 bit    valid
PCR 7301            e:/sapdb/programs      7.3.01.21               valid
PCR 7500            e:/sapdb/programs      7.5.00.42     64 bit    valid
SAP Utilities       e:/sapdb/programs      7.7.02.08     64 bit    valid
APO LC APPS         f:/sapdb/lcs/db/sap    6.00.004      64 bit    valid
Redist Python       e:/sapdb/programs      7.7.02.08     64 bit    valid
Base                e:/sapdb/programs      7.7.02.08     64 bit    valid
JDBC                e:/sapdb/programs      7.6.03.02               valid
Messages            e:/sapdb/programs      MSG 0.5010              valid
ODBC                e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 77           e:/sapdb/programs      7.7.02.08     64 bit    valid
Database Kernel     f:/sapdb/lcs/db        7.7.02.08     64 bit    valid
Loader              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC              e:/sapdb/programs      7.7.02.08     64 bit    valid
SQLDBC 76           e:/sapdb/programs      7.6.01.15     64 bit    valid
Fastload API        e:/sapdb/programs      7.7.02.08     64 bit    valid
C:\Documents and Settings\sc7adm>disp+work
disp+work information
kernel release                701
kernel make variant           701_REL
compiled on                   NT 5.2 3790 Service Pack 1 x86 MS VC++ 14.00
compiled for                  64 BIT
compilation mode              UNICODE
compile time                  Jul 6 2009 23:47:55
update level                  0
patch number                  50
source id                     0.050
supported environment
database (SAP, table SVERS)   700
                              701
operating system
Windows NT 5.0
Windows NT 5.1
Windows NT 5.2
Windows NT 6.0
Thanks for quick responce.
Suraj

API information for financial modules

Hi gurus
form where i can get information about API for financial modules , we need document in which APi description is available specially which are used in Financial Module i.e. AP, AR, GL.
thanks in advance
thanx
Pratap

Hi,
If you are in 11i, you can check the Integration Repository here:
http://irep.oracle.com
If you are in R12, the Integration Repository is embedded in the EBS.
There are also some API guides for different modules in the EBS documentation library. The documentation available depends on the apps release:
http://www.oracle.com/technology/documentation/applications.html
Hope it helps.

Using PD4ML library for convertin HTML to PDF

Hi all
i am using API s from PD4ML library for converting HTML to PDF.
what i am sending via HTML is a single HTML table.but the problem is i need to identify the number of lines which i need to give for single PDF page for the case when HTML table is too large to fit into single page.i can decide the number of lines before hand like 31 for portrait and 52 for landscape.but in this case problem arises when page size is too large.for eg page size is A1 and i have specified number of lines as 31.
In this case lot of empty space is left at the end of page.
so i actually need to calculate NUMBER OF LINES for single page as a FUNCTION of PAGE SIZE and FONT SIZE . font size because it also affects the number of lines that fit into single page.
would be really grateful if u guys can help fast

#1 There are definite copyright issues with your
software. Before you go live with anything like this,
make sure you're not gonna get reamed.Ehh? I didn't see anything from the OP's question that implied this. Yes, if he uses it to mine commercial web sites and convert them to PDF's there's a problem, but aside from that, where's the danger?
#2 The PDF part is the easy part. As the other poster
said, lowagie iText can do PDF. The rendered HTML is
a much bigger question. The smaller issue is that web
pages are defined to fit your browser window, so
you've got to choose a size. The much tougher problem
is finding a decent HTML renderer in Java. In truth,
I don't think there is one; JEditorPane is a piece of
****, and opera is really not a lot better. Not at all. The OP specifically mentioned web services, so we don't need to assume that Swing is involved. You can, using a 3rd party library (google for java pdf), have a servlet or jsp render its output as a PDF document.

Is WebLogic JMS C API backwards compatible with 8.1

I need to be able to send a JMS message from a C++ legacy application, so I am looking at using the JMS C API to do this. However, I am stuck with using WebLogic Server version 8.1. The JMS C API came out with version 9, so I am wondering if it would be possible to use it with 8.1?
          Can this be done? Thanks in advance.

I've shot off an internal email to see if I can get an answer - I'll post again if I get one. Some notes:
          - Prior to 9.0, there was a separate C-API kit available on dev2dev which is supported (via this newsgroup only), I don't know where it is now.
          - I think its likely the 9.0 C-API will work with an 8.1 client (or 7.0 for that matter), I just don't know if this usage supported.
          - You could use the 9.2 C-API with a 9.2 client to communicate with an 8.1 server. This is definitely supported.
          Tom, BEA

JMS C API library for AIX

Similar Messages

Maybe you are looking for