JMS Defined property names are set as "Application" defined properties

JMS Specification says "JMS reserves 'JMS_<vendor_name>' for provider specific properties " . so when i try to define a application property name as "JMS_Sun MicroSystems"
it is throwing the exception shown below :
javax.jms.JMSException: message property name is invalid .
This is working according to the specification but the same is not happening with JMS Defined Properties.
I am using J2EE's JMS Provider.
The JMS Specification says "JMS reserves the 'JMSX' property name prefix for JMS defined properties. "
This implies that a JMS Client Should not be allowed
to use them as "Application " property name.
For example the following code should throw JMS Exception :-
setStringProperty("JMSXUserID","abcd")
but instead it sets the application propertyname as "JMSXUserID". This behaviour is against the specification.

This behaviour is not agains the specification.
The specification table 3.3 defines who sets the properties, their type and their name. If you read the table two of the properties are set by the client, your assertion would make this behaviour contradictory.
The others are set by the provider on send or receive. This means that it does not matter what you set them to they will be overwritten when the message is sent, or received, so it is perfectly reasonable to allow the user to set this variable as it is overwritten by the provider.
If you were to try: setStringProperty("JMSXNewName", "abcd") I would expect this to fail as the property has not been defined yet, and accepting this would be contradictory to the specification.
In other words. You cannot use the prefix JMS_ or JMSX for your own properties, unless they have been defined previously by the Provider or the specification in which case they may be overwritten anyway.
Hope this helps.

Similar Messages

Duplicate property names are not allowed 'max'

I'm puzzled by the above error. It seems I can only add in one aggregate in a single query. The error shows up in the simple example below, if I remove one of the AVG the error goes away. I could create multiple queries and join them but
I've seen samples that suggest this should work. Any thoughts as to what I'm doing wrong?
SELECT MAX(Driver), AVG(Time), AVG (SpeedInKmPerHour)
FROM input
TIMESTAMP BY DataTimestamp
GROUP BY Driver, TumblingWindow(second, 1);

Hi Michael,
I'm using Stream Analytics to issue speading tickets in a driving game (they are actually achievements). It looks very similar to what you are doing, are you tracking real cars?
I started with this query:
-- Select the average speed over a 10 second tumbling window
select Driver, avg(Speed) as AverageSpeed
from telemetry
group by TumblingWindow(second, 10), Driver
Then tried this:
-- Select average speed where it exceeds
-- 100 MPH in a 10 second sliding wondow.
select Driver, avg(Speed) as AverageSpeed
from telemetry
group by SlidingWindow(second, 10), Driver
having avg(Speed) > 100
And am now using this:
-- Limit the output events to one per minute
with Speeds as
select
Driver,
avg(Speed) as AverageSpeed
from telemetry TIMESTAMP By CreatedTime
group by SlidingWindow(second, 10), Driver
having avg(Speed) > 100
select Driver, max(AverageSpeed) as Speed
from Speeds
group by TumblingWindow(minute, 1), Driver
Hope this helps.
Regards,
Alan
Free e-book: Windows Azure Service Bus Developer Guide.

SP2013 "Create Service Applicationt" and "Service Applications' Property" buttons are disabled

Hello,
I’ve verified that I am local admin on the server that is hosting central admin.
I run the browser as admin. In fact I am using Central Admin on the start menu. The UAC is disabled on the box any way
I run the browser on the machine that is hosing CA. I've tested in on many other machines.
I verified and my user is farm admin. That means I can see my logged-in user listed in CA->“Manage the farm administrators group”
IE Enhanced Security is off
Still I cannot create a service application or see any service application’s property. How to find where exactly is the problem?
Thank you

Hi Allan48,
What did you mean ‘cannot create a service application’?
Whether you meaned that the New service application button was disabled or not services applications were listed when you clicked the button.
By default, there are some services applications whose properties are disabled, for example Access Services Application and Excel Services Application etc.
Please make sure that SharePoint Web Services Root Application pool is running in Internet Information Services Manager, then check if this issue occurres.
I hope this helps.
Thanks,
Wendy
Forum Support
Please remember to mark the replies as answers if they help and unmark them if they provide no help. If you have feedback for TechNet Subscriber Support, contact
[email protected]
Wendy Li
TechNet Community Support

Where do we define a valuation area?

Hello,
what is the transaction used to define a valuation area?
Thanks

Hi,
To define the Valuation level ,we define in the T code OX14.
So ,in this we have two options either company code or plant.
so if we have selected Plant as the valuation level.
Automatically all the Plants created will becomes the valuation areas.
Means all your valution hapens at plant level.
hope so i am clear .
Regards
Anjanna.

How to set JMS Header Property without using DynamicConfiguration.

Hi,
My Scenario is: PDF File -->XI -->JMS
I need to send the PDF file as it is to JMS receiver, which shouldn't be a problem. The problem is I need to set the same file name in the Receiver JMS header property.
So to do this I am using DynamicConfiguration in message mapping but when File Adapter picks the PDF file (as it is) I get the run time mapping error which is quite obvious since message mapping expects the data in xml format.
Do you have any idea if I can avoid the message mapping and set the Dynamic Configuration somewhere else (not sure if java mapping can help here) or if there is some Module available to set file name in JMS header.
Note: PDF File name is dynamic.
Thanks!

I am on XI 3.0. I am not good in java.. can someone give an example?
Update:-
I have done some changes to my code and now it is working for me. Since I don't have much knowledge in Java (except writing UDFs )so don't know how good this coding is but defiantly this is my first step to learn Java APIs. Thanks to everyone for their comments & suggestions!!
If any improvement in below code can be done please let me know.
package com.sap.xi;
import com.sap.aii.mapping.api.*;
import java.io.InputStream;
import java.io.OutputStream;
import java.util.HashMap;
import java.util.Map;
import com.sap.aii.mapping.api.StreamTransformation;
import com.sap.aii.mapping.api.StreamTransformationException;
import org.xml.sax.helpers.DefaultHandler;
public class JMSHeaderMapping extends DefaultHandler implements StreamTransformation{
   private Map param;
    public void setParameter(Map map)//to access message header data during runtime
        param = map;
        if(param == null)
        param = new HashMap();
    public void execute(InputStream in, OutputStream out) //This method is used to run the mapping
    throws StreamTransformationException
            DynamicConfiguration dynamicconfiguration = (DynamicConfiguration)param.get("DynamicConfiguration");
            DynamicConfigurationKey key = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/File", "FileName");
            String MyFileName = dynamicconfiguration.get(key);
           DynamicConfigurationKey key1 = DynamicConfigurationKey.create("http://sap.com/xi/XI/System/JMS","DCJMSMessageProperty0");
        dynamicconfiguration.put(key1, MyFileName);
        byte[] inbyte = null;
        try {
    // convert InputStream into byte stream
          int bufsize = in.available();
          inbyte = new byte[bufsize];
          in.read(inbyte);
    // convert byte stream into OutputStream
          out.write(inbyte);
        catch (Throwable t){
         t.printStackTrace();
Edited by: Sarvesh Singh on May 9, 2011 8:47 PM

How to set JMS user property in JMS Adapter.

I am using Jdeveloper and SOA 11g. I want to filter some JMS messages from a topic based on a JMS user property. It is consumed using (JMS Adapter) consumer --> Mediator---> DBAdapter.
My Question is how to define a JMS user property using Jdeveloper 11g.
Thanks
Edited by: user5108636 on 24/06/2010 16:10

In Mediator mplan Assign Values use a property expression in the "to" side like:
jca.jms.JMSProperty.XXX
where XXX is the name of the property you would like to have created and populated. In source it will look like:
<Mediator name="A03QueueWFeedMediator" xmlns:xsi="http://www.w3.org/2001/XMLSchema-instance" xmlns="http://xmlns.oracle.com/sca/1.0/mediator"
wsdlTargetNamespace="http://www.oracle.com/integration/b2b/A03QueueWFeedFromB2B/">
<operation name="receive" deliveryPolicy="AllOrNothing" priority="4"
validateSchema="false">
<switch>
<case executionType="direct" name="A03QueueWFeedToJMS.Produce_Message">
<action>
<transform>
<part name="$out.body"
function="xslt(xsl/ADT_AXX_To_ADT_AXX.xsl, $in.body)"/>
</transform>
<assign>
<copy target="$out.body/imp1:ADT_AXX/imp1:MSH/@Type"
value="$in.property.b2b.documentDefinitionName"
xmlns:imp1="NS_64FCBED013AA409D933F624674E67BF220070423183755"/>
<copy target="$out.body/imp1:ADT_AXX/imp1:MSH/@ID"
value="$in.property.b2b.fromTradingPartnerId"
xmlns:imp1="NS_64FCBED013AA409D933F624674E67BF220070423183755"/>
<copy target="$out.body/imp1:ADT_AXX/imp1:MSH/@Name"
value="$in.property.b2b.toTradingPartnerId"
xmlns:imp1="NS_64FCBED013AA409D933F624674E67BF220070423183755"/>
<copy target="$out.property.b2b.conversationId"
value="$in.property.b2b.conversationId"/>
<copy target="$out.property.b2b.documentDefinitionName"
value="$in.property.b2b.documentDefinitionName"/>
<copy target="$out.property.b2b.documentProtocolName"
value="$in.property.b2b.documentProtocolName"/>
<copy target="$out.property.b2b.documentProtocolVersion"
value="$in.property.b2b.documentProtocolVersion"/>
<copy target="$out.property.b2b.documentTypeName"
value="$in.property.b2b.documentTypeName"/>
<copy target="$out.property.b2b.fromTradingPartnerId"
value="$in.property.b2b.fromTradingPartnerId"/>
<copy target="$out.property.b2b.fromTradingPartnerIdType"
value="$in.property.b2b.fromTradingPartnerIdType"/>
<copy target="$out.property.b2b.toTradingPartnerId"
value="$in.property.b2b.toTradingPartnerId"/>
<copy target="$out.property.b2b.toTradingPartnerIdType"
value="$in.property.b2b.toTradingPartnerIdType"/>
*<copy target="$out.property.jca.jms.JMSProperty.conversationId"*
value="$in.property.b2b.conversationId"/> <copy target="$out.property.jca.jms.JMSProperty.documentDefinitionName"
value="$in.property.b2b.documentDefinitionName"/>
<copy target="$out.property.jca.jms.JMSProperty.documentProtocolName"
value="$in.property.b2b.documentProtocolName"/>
<copy target="$out.property.jca.jms.JMSProperty.documentProtocolVersion"
value="$in.property.b2b.documentProtocolVersion"/>
<copy target="$out.property.jca.jms.JMSProperty.documentTypeName"
value="$in.property.b2b.documentTypeName"/>
<copy target="$out.property.jca.jms.JMSProperty.fromTradingPartnerId"
value="$in.property.b2b.fromTradingPartnerId"/>
<copy target="$out.property.jca.jms.JMSProperty.fromTradingPartnerIdType"
value="$in.property.b2b.fromTradingPartnerIdType"/>
<copy target="$out.property.jca.jms.JMSProperty.toTradingPartnerId"
value="$in.property.b2b.toTradingPartnerId"/>
<copy target="$out.property.jca.jms.JMSProperty.toTradingPartnerIdType"
value="$in.property.b2b.toTradingPartnerIdType"/>
</assign>
<invoke reference="A03QueueWFeedToJMS" operation="Produce_Message"/>
</action>
</case>
</switch>
</operation>
</Mediator>
The runtime will see something like:
[2010-09-09T11:48:06.353+10:00] [AdminServer] [TRACE] [] [oracle.soa.adapter] [tid: weblogic.work.j2ee.J2EEWorkManager$WorkWithListener@60ddbc76] [userId: weblogic] [ecid: 0000Ifo9olH2zGWjLxmJOA1CY0sg0001jY,0] [SRC_CLASS: oracle.integration.platform.blocks.adapter.fw.log.LogManagerImpl] [APP: soa-infra] [dcid: 02d1ff4621073810:26418f01:12af379c141:-7fd3-0000000000000219] [SRC_METHOD: log] Jms Adapter A03QueueWFeed:A03QueueWFeedToJMS [ Produce_Message_ptt::Produce_Message(body) ] XMLHelper_convertJmsMessageHeadersAndPropertiesToXML: <JMSInboundHeadersAndProperties xmlns="http://xmlns.oracle.com/pcbpel/adapter/jms/">[[
<JMSInboundHeaders>
<JMSCorrelationID></JMSCorrelationID>
<JMSDeliveryMode>2</JMSDeliveryMode>
<JMSExpiration>0</JMSExpiration>
<JMSMessageID>ID:<911867.1283996886119.0></JMSMessageID>
<JMSPriority>4</JMSPriority>
<JMSRedelivered>false</JMSRedelivered>
<JMSType></JMSType>
<JMSTimestamp>1283996886119</JMSTimestamp>
</JMSInboundHeaders>
<JMSInboundProperties>
<Property name="documentProtocolVersion" value="2.3"/>
<Property name="toTradingPartnerIdType" value="Name"/>
*<Property name="conversationId" value="C0A83C0712AF42D840E0000074BA3CCC"/>* <Property name="documentTypeName" value="ADT"/>
<Property name="tracking_conversationId" value="C0A83C0712AF42D866F0000074BA3CD9"/>
<Property name="tracking_ecid" value="C0A83C0712AF42D866F0000074BA3CDA"/>
<Property name="tracking_compositeInstanceId" value="60019"/>
<Property name="documentProtocolName" value="HL7"/>
<Property name="documentDefinitionName" value="QH_ADT_Generic"/>
<Property name="tracking_parentComponentInstanceId" value="mediator:45E076D0BBB411DFAF05817F5F0DD1A1"/>
<Property name="fromTradingPartnerIdType" value="Name"/>
<Property name="fromTradingPartnerId" value="HOMER"/>
<Property name="toTradingPartnerId" value="Self"/>
<Property name="JMSXDeliveryCount" type="integer" value="1"/>
</JMSInboundProperties>
</JMSInboundHeadersAndProperties>
Edited by: Michael.Czapski on 8/09/2010 18:58

How do I configure the mixed signal graph property node to set the plot names

I have a mixed signal graph displaying digital and analog data in two groups.
I would like to programmatically set the names of individual plots i.e. rather that the digital graph displaying 'Digital 0->Line 0' I would like to set it to 'Signal 1' in the vi.
How do I do this?
Probably via the property node but I cant get this to work without errors? (i.e. i cant find the right combination of node arguments to set.)
Also, I can set the names of the plots of the component waveforms programmatically, but when I bundle the plots together to form the mixed signal graph, the plot names are reset to the mixed signal graph default values. Can this behaviour be turned off?

What are you doing? You need to select the plot first and then set the name, like this:
Attachments:
Mixed Signal Graph_BD.png ‏1 KB

How to use weblogic.Admin to set JMS ErrorDestination property on WLS 7?

This thread is talking about using weblogic.Admin to set the ErrorDestination property.
          http://forums.bea.com/bea/thread.jspa?threadID=200036378&messageID=202187327&start=0
          We run the script against the WLS 7.0 server, script get 'OK' result but it didn't work (property wasn't set). Some error is reported in the admin.log on the server.
          We also run the scipt against the WLS 8 server. It worked perfectly.
          Does anyone know whether this works at all on WLS 7?

The reason we are using weblogic.Admin is that we are using conf2admin to generate the scripts. weblogic.Admin seems to be the only option for WLS7. Thanks for your suggestion and will definitely check out WLST.
          The full error message is:
          ####<Aug 27, 2004 8:55:20 AM NZST> <Emergency> <Management> <rbd1> <admin> <ExecuteThread: '9' for queue: '__weblogic_admin_rmi_queue'> <kernel identity> <> <141067> <The value n204162:JMSServer=LAS2JMSServer,Name=FailedQueue,Type=JMSQueue specified for the ErrorDestination attribute is not valid. MBean: n204162:JMSServer=LAS2JMSServer,Name=FundingQueue,Type=JMSQueue. Method: setAttributes. Exception: javax.management.InvalidAttributeValueException: BeanShell Interpreter threw exception while evaluating (((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value)))) on value n204162:JMSServer=LAS2JMSServer,Name=FailedQueue,Type=JMSQueue, getLegalCheck() for attribute ErrorDestination of MBean "n204162:JMSServer=LAS2JMSServer,Name=FundingQueue,Type=JMSQueue", Sourced file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : Method Invocation weblogic.management.configuration.JMSLegalHelper.legalErrorDestination : at Line: 1 : in file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : weblogic .management .configuration .JMSLegalHelper .legalErrorDestination ( self , value )
          Target exception: java.lang.NullPointerException
          .>
          javax.management.InvalidAttributeValueException: BeanShell Interpreter threw exception while evaluating (((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value)))) on value n204162:JMSServer=LAS2JMSServer,Name=FailedQueue,Type=JMSQueue, getLegalCheck() for attribute ErrorDestination of MBean "n204162:JMSServer=LAS2JMSServer,Name=FundingQueue,Type=JMSQueue", Sourced file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : Method Invocation weblogic.management.configuration.JMSLegalHelper.legalErrorDestination : at Line: 1 : in file: <Inline eval of: ((value == void)?(true):(weblogic.management.configuration.JMSLegalHelper.legalErrorDestination(self, value))); > : weblogic .management .configuration .JMSLegalHelper .legalErrorDestination ( self , value )
          Target exception: java.lang.NullPointerException
               at weblogic.management.internal.DynamicMBeanImpl.checkAttributeValueIsLegal(DynamicMBeanImpl.java:1517)
               at weblogic.management.internal.DynamicMBeanImpl.prepareForModification(DynamicMBeanImpl.java:1440)
               at weblogic.management.internal.DynamicMBeanImpl.setAttribute(DynamicMBeanImpl.java:1004)
               at weblogic.management.internal.ConfigurationMBeanImpl.setAttribute(ConfigurationMBeanImpl.java:353)
               at weblogic.management.internal.DynamicMBeanImpl.setAttributes(DynamicMBeanImpl.java:827)
               at com.sun.management.jmx.MBeanServerImpl.setAttributes(MBeanServerImpl.java:1475)
               at weblogic.management.internal.RemoteMBeanServerImpl.setAttributes(RemoteMBeanServerImpl.java:905)
               at weblogic.management.internal.RemoteMBeanServerImpl_WLSkel.invoke(Unknown Source)
               at weblogic.rmi.internal.BasicServerRef.invoke(BasicServerRef.java:362)
               at weblogic.rmi.internal.BasicServerRef$1.run(BasicServerRef.java:313)
               at weblogic.security.service.SecurityServiceManager.runAs(SecurityServiceManager.java:785)
               at weblogic.rmi.internal.BasicServerRef.handleRequest(BasicServerRef.java:308)
               at weblogic.rmi.internal.BasicExecuteRequest.execute(BasicExecuteRequest.java:30)
               at weblogic.kernel.ExecuteThread.execute(ExecuteThread.java:153)
               at weblogic.kernel.ExecuteThread.run(ExecuteThread.java:134)

User defined name in place of application server in SAPGUI 6.40

Hi,
Can anybody please let me know how to define company name in place of static Ip in SAPGUI 6.40.
I am using AIX 5.3L / Oracle 9.x / ECC 5.0
I have given static IP in the space provided for application server which I don't want. I want to give company initials (XYZ) in place of application server for the safety purpose.
Thanks in advance
Sanjay

U can put the ip of the host server or the hostname of the server. How can you put the company's name. And wven if you put the company name which machine it will connect.
But if you want to do it by any means then do it as under\
In the frontend computer got to---->Windows->system32-->Drivers--->etc
There will be a file hosts.
make the following entry in this file
192.168.0.xxxx company name
means the ip of the sap server your company name
Use this name in the sapgui setting.
But the restriction is that in every frontend machines this entry has to be mentioned.
Pl dont forget to award points
Regards

Error: property is not set correctly for User Defined Fields.

Hi Gurus,
I am trying to define a new field Department of type Lookup. For this i have created a new field in user defined fields. But when i click on create user in web console it give me "property is not set correctly for User Defined Fields."
I created a lookup field for department , but looks like i have to some kind of mapping. How can it be done?
Thanks,
sat

Hi Kevin,
I couldnt get it done. This is what I had done so far.
Created Lookup.Users.Dept ( with code code=23 & decode=treasury)
Added two field in xlwebadmin.properties & xlwebadmin_en.properties
lookupfield.header.users.deptcode=Department code
lookupfield.header.users.deptname=Department name
In my lookfield properties in
column caption=Department code,Department name
Column query= Not sure what to give? here
Thanks,
sat

Cannot cutomize ALL of JFileChooser - what are the property names?

Setting the UIManager property JFileChooser.homeFolderToolTipText to some value seems to have no effect on my machine running jdk 1.4.1.
I am able to customize most of the JFileChooser, for instance changing this property does work JFileChooser.lookInLabelText.
However, I have not been able to find the correct property names of the following textual contents of JFileChooser:
1. The column names in a detailed list view (file name, size, modified date, ...)
2. The text and tooltip of the open button when a folder is selected (which differs from the text shown when a file is selected)
3. The text and tooltip of the home button
If anyone knows the way to change these properties I would be very interested in hearing from you.
Randahl

Hi
WinNT4:
1. The column names in a detailed list view (file name, size, modified date, ...)
UIManager.put("FileChooser.fileNameHeaderText","NEW NAME");
     UIManager.put("FileChooser.fileSizeHeaderText","NEW SIZE");
     UIManager.put("FileChooser.fileTypeHeaderText","NEW TYPE");
     UIManager.put("FileChooser.fileDateHeaderText","NEW DATE");
     UIManager.put("FileChooser.fileAttrHeaderText","NEW ATTR");
2. The text and tooltip of the open button when a folder is selected (which differs from the text shown when a file is selected)
UIManager.put("FileChooser.directoryOpenButtonText","NEW OPEN");
UIManager.put("FileChooser.directoryOpenButtonToolTipText","NEW OPEN DIR TTT");
3. The text and tooltip of the home button
UIManager.put("FileChooser.homeFolderToolTipText","NEW TTT FOR HOME");//does not work, "Desktop"
JFileChooser fc = new JFileChooser();
sergey

[svn:fx-trunk] 5604: Ensuring qualified class names are used in type selector cache keys for Flex 4 applications .

Revision: 5604
Author: [email protected]
Date: 2009-03-26 14:00:26 -0700 (Thu, 26 Mar 2009)
Log Message:
Ensuring qualified class names are used in type selector cache keys for Flex 4 applications.
QE: Yes, this should address style issues for test cases that contain two different components with the same local name.
Dev: No
Doc: No
Checkintests: Pass
Modified Paths:
flex/sdk/trunk/frameworks/projects/framework/src/mx/styles/StyleProtoChain.as

Remember that Arch Arm is a different distribution, but we try to bend the rules and provide limited support for them. This may or may not be unique to Arch Arm, so you might try asking on their forums as well.

How do I use a JMS MessageSelector with application-specific properties

According to a couple of JMS references (Sun, Oreilly) and the oracle documentation (under the heading "Using Oracle Java Messaging Service (JMS) to Access AQ", page 102 of 1082 , Application Developers Guide - Advanced Queuing, Release 2 (8.1.6))
Standard JMS Features
"Message selection based on message header fields/properties"
Is there a special syntax for using application-specific (user defined) JMS message properties as message selectors in Oracle 8.1.7?
I've tried to create a message selector based on a custom property that I set, i.e. "username != 'William'". (example from O'Reilly JMS book, pg. 44)
I always get a JMS-159: Invalid selector Selector Parse error unless the property is a JMS-Defined property. i.e., " JMSMessageID = 'ID:9789D65E215B3613E034080020B1456E' " works fine.
From the docs and the oter examples, I figure application-specific (user-defined) properties are legal.
Thans for any help in advance.

Well I found an article in another forum that states in oracle 8i, message selectors are only supported on JMSCorrelationID and JMSMessageID
(9i will have/has the full JMS spec support for message selectors , or so the response to the message says)
Thanks anyway
(Aricle Is In Products > Database > Oracle Advanced Queueing
Title is JMS AQ: selector in createReceiver does not work)

How to set MQ message header properties using JMS adapter? (10.1.2)

Hello,
I am trying to send MQ messages from a BPEL process. We are using OAS 10.1.2 and JMS MQ adapter. Could you please let me know how to set the message descriptors like message format, type, report and reply to queue properties and queue open options (in jmsAdapterOutboundHeader).
Regards,
Geratayya

put something like this
<activationAgents>
      <activationAgent className="oracle.tip.adapter.fw.agent.jca.JCAActivationAgent" partnerLink="PARNERLINKNAME">
        <property name="clusterGroupId">SOMEUNIQUEVALUE</property>
        <property name="portType">PARTNERLINK_PORTTYPE</property>
      </activationAgent>
    </activationAgents>

JMS Adapter Destination Name value

Hi
I am trying to connect to a WLS remote distributed queue using the JMS Adapter but I am struggling to find the correct format for the destination name property as each time it gives various JMSExceptions stating that it cannot find the queue. Below is the .jca properties
<connection-factory location="eis/wls/Queue" UIConnectionName="OSB_Test" UIJmsProvider="WLSJMS" adapterRef=""/>
<endpoint-activation portType="Consume_Message_ptt" operation="Consume_Message">
<activation-spec className="oracle.tip.adapter.jms.inbound.JmsConsumeActivationSpec">
<property name="DestinationName" value="jndiEmployeeDQ"/>
<property name="UseMessageListener" value="false"/>
<property name="PayloadType" value="TextMessage"/>
</activation-spec>
</endpoint-activation>
I have also set the factory properties of the outbound connection pool as follows
java.naming.factory.initial=weblogic.jndi.WLInitialContextFactory; java.naming.provider.url= t3://<remote-hostname>:<port>;java.naming.security.principal= <username>;java.naming.security.credentials=<password>
Below is the message I am receiving
<01-Feb-2011 11:35:32 o'clock GMT> <Warning> <oracle.soa.adapter> <BEA-000000> <JMSAdapter TestEmployeeQueueA
BINDING.JCA-12135
ERRJMS_ERR_CR_QUEUE_CONS.
ERRJMS_ERR_CR_QUEUE_CONS.
Unable to create Queue consumer due to JMSException.
Please examine the log file to determine the problem.
     at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:620)
     at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:497)
     at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.createConsumer(JMSMessageConsumer.java:342)
     at oracle.tip.adapter.jms.JMS.JMSMessageConsumer.init(JMSMessageConsumer.java:913)
     at oracle.tip.adapter.jms.inbound.JmsConsumer.init(JmsConsumer.java:862)
     at oracle.tip.adapter.jms.JmsEndpoint.run(JmsEndpoint.java:163)
     at oracle.integration.platform.blocks.executor.WorkManagerExecutor$1.run(WorkManagerExecutor.java:105)
     at weblogic.work.j2ee.J2EEWorkManager$WorkWithListener.run(J2EEWorkManager.java:183)
     at weblogic.work.DaemonWorkThread.run(DaemonWorkThread.java:30)
Caused by: weblogic.jms.common.JMSException: [JMSExceptions:045101]The destination name passed to createTopic or createQueue "jndiEmployeeDQ" is invalid. If the destination name does not contain a "/" character then it must be the name of a distributed destination that is available in the cluster to which the client is attached. If it does contain a "/" character then the string before the "/" must be the name of a JMSServer or a ".". The string after the "/" is the name of a the desired destination. If the "./" version of the string is used then any destination with the given name on the local WLS server will be returned.
     at weblogic.jms.dispatcher.DispatcherAdapter.convertToJMSExceptionAndThrow(DispatcherAdapter.java:110)
     at weblogic.jms.dispatcher.DispatcherAdapter.dispatchSyncNoTran(DispatcherAdapter.java:61)
     at weblogic.jms.client.JMSSession.createDestination(JMSSession.java:3192)
     at weblogic.jms.client.JMSSession.createQueue(JMSSession.java:2577)
     at weblogic.jms.client.WLSessionImpl.createQueue(WLSessionImpl.java:938)
     at oracle.tip.adapter.jms.JMS.JMSDestination.getQueue(JMSDestination.java:83)
     at oracle.tip.adapter.jms.JMS.JMSConnection.createConsumer(JMSConnection.java:605)
     ... 8 more
Has anyone encountered this problem before?
Damien

Could you connect to same destination using any other client (like java). I think issue is either in the queue deployment or in the connection pool configuration at your side. Make sure that queue is available (by connecting to same queue using any other client) and cross check you connection pool configuration.
Let us know the version of products you are using and connecting to.
Regards,
Anuj

JMS Defined property names are set as "Application" defined properties

Similar Messages

Maybe you are looking for