Job processing - Result ALV GRID

Hi folks!
I'm not very familiar with job processing. I'm having a report that displays an alv grid as a result of it. However it seems that the amount of registers to be read from the database now they are much, much more, so the users are getting the dump of time exceeded.
What I have in mind is to run this on background, but I know there are some limitations when running on background. My question here is that:
Is it possible to have an alv grid report to run as a Job, or I would have to replace the alv by simple report with Write statement?
Thanks for any help.
Regards,
Gilberto Li

Hi again.
My code is a little old so it's not Object Oriented or in ABAP/OO
So my code to call the ALV-GRID looks like:
Call ABAP/4 List Viewer
CALL FUNCTION 'REUSE_ALV_GRID_DISPLAY'
    EXPORTING
      i_callback_program = g_repid
     i_background_id    = 'BUTTON_OFF_BACK'
      is_layout          = gs_layout
      it_fieldcat        = fieldcat
      it_sort            = lt_sort
      it_events          = gt_events[]
    TABLES
      t_outtab           = itab_all.
Is there any way to do what Vij mentioned in non object oriented?
Thanks in advice.
Regards,
Gilberto Li

Similar Messages

ALV GRID - how to handle scrollbar click

Hello,
Is it possible to handle scrollbar movment/click
in alv grid control?
Thanks in advance for your help.
Harry

Hello vijay,
I'am implementing a calendar with the alv grid control.
Since I do not want to process all the data at one time
I need to know when the scrollbar reach the upper or lower extremity so that I can populate + other processes the alv grid.
Something very similar to the actual behaviour of "F4_DATE" function module displaying the Calendar control.
Hope you can help me
Thanks

How to total No. of employees based on Org unit as well as Job ID in ALV

Hi ,
I need to subtotal no. of employees in an org unit and also another subtotal for employees under same job ids using ALV Grid display.
Regards,
Sarika.

Hi Sarika,
Create an additional column in your output for integer field and populate the same with value 1 fro each row.
Then, SORT the internal table by Org. Unit and Job and perform sum operation on the column for integer field.
You can SORT by adding fields to the IT_SORT parameter in REUSE_ALV_GRID_DISPLAY and mark the DO_SUM in the new integer column fieldcatalog entry.
Cheers,
Aditya
Edited by: Aditya Laud on Feb 14, 2008 2:25 AM

How to display more than 255 chars in background job with ALV Grid ????

Hi All,
I am using ALV grid with OO.
I have used call screen for ALV grid display. I have to display more than 255 characters in width. While running it, I can see the list perfectly.
But in background mode, the list is truncated after 255 chars.
Can anybody help how to send complete list(width more than 255 chars) to spool.
Thanks and Regards,
Neha

Hi SAP fan,
YES you can run the ALV report in background mode.
To run the report in background do F9 instead of F8, then give immediate and save.
Now goto Sm35 goto job overview and view the job listed
Choose the job and press the spool button. It will show the list created on the next page. When u clcik the list u can see the ALV output.
To see this the job should be in the finished status.
How to define Periodic Jobs
1.Execute transaction SM36
2.Define Job name, Job class, Target server
3.Click on 'START CONDITION' button
4.Click on 'Date/Time' button
5.Enter Scheduled start DATE & TIME. Check mark 'Periodic Job' field. Click on 'Period values' button and select 'Hourly' or 'Dialy' or 'Weekly' or 'Monthly' or Other period and SAVE. Go back to main screen.
6.Click on 'STEPS' button and enter Program name and Variant under box 'ABAP Program'. Click on 'Print Specification' button and enter Printer name under 'Output device' and SAVE
7.Click on SAVE button until you get message on bottom of the screen that describes 'Job XYZ saved with status: Scheduled'.
8.Click on 'Job overview' button or execute SM37 transaction.
9.Select the appropriate 'Job name', 'User name', 'Job Status' & Schedule date under 'Job start condition' and click on 'Execute' button or press F8.
10.You will now see all your scheduled JOBS.
Case: 2
You can Run in Background but make sure it is alv list, not alv Grid FM. if you are uisng alv list not problem , but if you are using alv grid then you can code like this..
if sy-batch = ' '.
call 'REUSE_ALV_GRID_DISPLAY'.
else.
call 'REUSE_ALV_LIST_DISPLAY'.
endif.
if you are using OO alv then write this code..
CALL METHOD cl_gui_alv_grid=>offline
 RECEIVING e_offline = off.
 IF off IS INITIAL.
 CREATE OBJECT g_custom_container
 EXPORTING container_name = g_container.
 ENDIF.
Case: 3
if you are using OO ALV.
Just before creating the custom container check for the following condition.
Batch or Web Reporting
IF cl_gui_alv_grid=>offline( ) IS INITIAL.
CREATE OBJECT o_custcontainer
EXPORTING
container_name = lc_custcontrol
EXCEPTIONS
cntl_error = 1
cntl_system_error = 2
create_error = 3
lifetime_error = 4
lifetime_dynpro_dynpro_link = 5
OTHERS = 6
ENDIF.
You can see the output in Spool in transaction SP01.
Good Luck and thanks
AK

Export to spreadsheet from program result list (ALV Grid) via the web

Hello alles!
When executing a program (a report) using SAP WebGUI or the portal (Manager's Desktop/Launchpad etc.), exporting the result list to a spreadsheet doesn't seem to work. No error message, browser doesn't really hang, but nothing happens. Neither Excel, nor XML export, nor anything works.
Export from the same program works just fine in SAP GUI.
(SAP Note 314568 has some information about ALV Grid export limitations, but I can't make the XML export work either...)
Could this be a configuration error in ITS? In that case, where..?
Or is it something we just need to live with?
Thank you in advance!
Brgds, Caroline

There is a known problem regarding exportation to Excel.
Try the following path :
Tools --> Macro --> Security
Then go to the "Trusted Publishers" tab and tick the "Trust acess to Visual Basic Project" option.
This should do the trick.

ALV grid to list processing and GUI status

Hi,
In a customized program the report output is in ALV grid which is interactive. On selecting a record and pressing SAVE button a BAPI runs in background. In order to display BAPI error message the leave to list-processing has been used. But GUI status is not working in list display and can not exit or go back from here to main selection screen.
when try to see program name & screen no it displays
Program - SAPLKKBL
Menu - STANDARD_FULLSCREEN
pls advise how to go back from list to main screen or ALV output.
thanks
anya

Hi Anya,
As per my understanding, this is your prog flow:
*Main ALV Display.
*Select record.
*Click on Button SAVE.
*Handle Event.
*Call BAPI for processing based on selection.
Now at this point why dont you colect the error messages from the BAPI, and display it in a POP-UP ALV display?
You need not e very much worried about the PF status and all. Also this POP-UP will be placed on the MAIN ALV. So when you close the POP-UP it will come back to the main ALV.
By this when you press the BACK button of the main ALV, it will take you back to the selection scree.
Please let me know if i am missing something.
ags

ALV REPORT: read selected checkbox in alv grid and process the pushbutton

my requirement is to check some rows from alv grid and the press the pushbutton. Thereby following things should process:
select all checked rows into an itab and call the transaction code CJ01 for all
entries......
I am finding the problem that when I select the checkbox....the internal table doesnt recognize the boxes as checked ones......
thanks in advance...
Kartikey Singh,

Data: ref1 type ref to cl_gui_alv_grid.
      CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
        IMPORTING
          E_GRID = ref1.
      call method ref1->check_changed_data.
      loop at t_output where Flag = 'X'.
        if t_output-VKUEGRU is initial.
          message e000 with text-110.
        endif.
endloop.

ALV grid refresh problem when I return from list-processing

hi,
I have made alv grid with f4 help features and i'm using row select feature.
When i click on a button in Application toolbar, the program leaves to list processing and then return to alv gridscreen.
Now the problem arises.
(1)Even if i select rows and press F8, the program does not identify the rows selected and does not give me desired output.
(2)Also, when i press F4, the selected value does not appear in the text field.
Both the cases are working fine, if i dont press button and go to list processing.
Please help!!

You can use the function module as stated below -
FORM user_command USING r_ucomm TYPE sy-ucomm
rs_selfield TYPE slis_selfield.
CALL FUNCTION 'GET_GLOBALS_FROM_SLVC_FULLSCR'
IMPORTING
ET_EXCLUDING =
E_FLG_NO_HTML =
E_CALLBACK_PROGRAM =
E_REPID =
e_grid = ref1
ES_LAYOUT_KKBLO =
ES_SEL_HIDE =
CALL METHOD ref1->check_changed_data.
This helps to get the data in the internal table refreshed as well as that on the screen so that both are in sync.
this is generally used on some event, you can also use it otherwise.

Reward if useful.
Regards,
Pritha

ALV grid abort processing, if wrong value

Hello,
i've a editable alv grid.
Is it possible to abort at event data_changed/data_changed_finished, if an value is wrong (f.e. to high < 500), and write the old value back.
Best regards,
TomSd

Hello Thomas
The sample report ZUS_SDN_ALVGRID_EDITABLE_10 provides a possible (perhaps not the most elegant) solution for your problem.
*& Report ZUS_SDN_ALVGRID_EDITABLE_10
*& Description: Reset false values entered in editable ALV list
*& to original values
*& Example: Column SORT_KEY allows values from '000'-'150'
* -> reset if value > '010'
*& Thread: ALV grid abort processing, if wrong value
*& Link: https:||<a class="jive_macro jive_macro_thread" href="" __jive_macro_name="thread" modifiedtitle="true" __default_attr="669430"></a>
REPORT zus_sdn_alvgrid_editable_10.
TYPE-POOLS: abap.
INCLUDE <icon>. " NOTE: replace by TYPE-POOLS: icon. on >= 6.20
DATA:
gd_repid TYPE syrepid,
gd_okcode TYPE sy-ucomm,
gs_layout TYPE lvc_s_layo,
gt_fcat TYPE lvc_t_fcat,
go_docking TYPE REF TO cl_gui_docking_container,
go_grid TYPE REF TO cl_gui_alv_grid.
TYPES: BEGIN OF ty_s_outtab.
INCLUDE TYPE knb1.
TYPES: END OF ty_s_outtab.
TYPES: ty_t_outtab TYPE STANDARD TABLE OF ty_s_outtab
 WITH DEFAULT KEY.
DATA:
gt_outtab TYPE ty_t_outtab,
gt_outtab_pbo TYPE ty_t_outtab.
* CLASS lcl_eventhandler DEFINITION
CLASS lcl_eventhandler DEFINITION.
PUBLIC SECTION.
 CLASS-DATA:
 mo_data_changed TYPE REF TO cl_alv_changed_data_protocol.
 CLASS-METHODS:
 handle_data_changed
 FOR EVENT data_changed OF cl_gui_alv_grid
 IMPORTING
 er_data_changed
 e_onf4
 e_onf4_before
 e_onf4_after
 e_ucomm
 sender,
 handle_data_changed_finished
 FOR EVENT data_changed_finished OF cl_gui_alv_grid
 IMPORTING
 e_modified
 et_good_cells,
 handle_user_command
 FOR EVENT user_command OF cl_gui_alv_grid
 IMPORTING
 e_ucomm,
 handle_toolbar
 FOR EVENT toolbar OF cl_gui_alv_grid
 IMPORTING
 e_object
 e_interactive.
ENDCLASS. "lcl_eventhandler DEFINITION
* CLASS lcl_eventhandler IMPLEMENTATION
CLASS lcl_eventhandler IMPLEMENTATION.
METHOD handle_data_changed.
* define local data
 DATA:
 ld_idx TYPE i,
 ls_cell TYPE lvc_s_modi,
 ls_msg TYPE symsg.
 FIELD-SYMBOLS:
 <lt_outtab> TYPE ty_t_outtab,
 <ls_outtab> TYPE ty_s_outtab.
 ASSIGN er_data_changed->mp_mod_rows->* TO <lt_outtab>.
 LOOP AT er_data_changed->mt_mod_cells INTO ls_cell
 WHERE ( fieldname = 'ZUAWA' ).
 ld_idx = syst-tabix.
 IF ( ls_cell-value <= '010' ).
 READ TABLE <lt_outtab> ASSIGNING <ls_outtab> INDEX ld_idx.
 MODIFY gt_outtab FROM <ls_outtab> INDEX ls_cell-row_id. " !!!
 ELSE.
 CLEAR: ls_msg.
 ls_msg-msgv1 = 'Value'.
 ls_msg-msgv2 = ls_cell-value.
 ls_msg-msgv3 = 'too high (> 010)'.
 CALL METHOD er_data_changed->add_protocol_entry
 EXPORTING
 i_msgid = '00'
 i_msgty = 'E'
 i_msgno = '398'
 i_msgv1 = ls_msg-msgv1
 i_msgv2 = ls_msg-msgv2
 i_msgv3 = ls_msg-msgv3
* I_MSGV4 =
 i_fieldname = ls_cell-fieldname
 i_row_id = ls_cell-row_id
 i_tabix = ls_cell-tabix.
 DELETE er_data_changed->mt_mod_cells INDEX ld_idx.
 DELETE er_data_changed->mt_good_cells INDEX ld_idx.
 ENDIF.
 ENDLOOP.
 IF ( syst-subrc = 0 ).
 er_data_changed->display_protocol( ).
 ENDIF.
** cl_gui_cfw=>set_new_ok_code( 'REFRESH' ). " not possible on 4.6c
 CALL METHOD cl_gui_cfw=>set_new_ok_code
 EXPORTING
 new_code = 'DUMMY'
* IMPORTING
* RC =
ENDMETHOD. "handle_data_changed
METHOD handle_data_changed_finished.
* define local data
 DATA:
 ls_outtab TYPE ty_s_outtab,
 ls_cell TYPE lvc_s_modi.
ENDMETHOD. "handle_data_changed_finished
METHOD handle_user_command.
ENDMETHOD. "handle_user_command
METHOD handle_toolbar.
* define local data
 DATA:
 ls_button TYPE stb_button.
 ls_button-function = 'DEFAULT'.
 ls_button-icon = icon_mass_change.
 ls_button-quickinfo = 'Set default value for column'.
 APPEND ls_button TO e_object->mt_toolbar.
ENDMETHOD. "handle_toolbar
ENDCLASS. "lcl_eventhandler IMPLEMENTATION
START-OF-SELECTION.
SELECT * FROM knb1 INTO TABLE gt_outtab UP TO 20 ROWS
 WHERE bukrs = '1000'.
gt_outtab_pbo = gt_outtab. " store PBO data
* Create docking container
CREATE OBJECT go_docking
 EXPORTING
 parent = cl_gui_container=>screen0
 ratio = 90
 EXCEPTIONS
 OTHERS = 6.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Create ALV grid
CREATE OBJECT go_grid
 EXPORTING
 i_parent = go_docking
 EXCEPTIONS
 OTHERS = 5.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Build fieldcatalog
PERFORM build_fieldcatalog.
PERFORM set_layout.
SET HANDLER:
 lcl_eventhandler=>handle_toolbar FOR go_grid,
 lcl_eventhandler=>handle_data_changed FOR go_grid,
 lcl_eventhandler=>handle_data_changed_finished FOR go_grid.
* Display data
CALL METHOD go_grid->set_table_for_first_display
 EXPORTING
 is_layout = gs_layout
 CHANGING
 it_outtab = gt_outtab
 it_fieldcatalog = gt_fcat
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
go_grid->set_toolbar_interactive( ).
CALL METHOD go_grid->register_edit_event
 EXPORTING
 i_event_id = cl_gui_alv_grid=>mc_evt_enter
 EXCEPTIONS
 error = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* Link the docking container to the target dynpro
gd_repid = syst-repid.
CALL METHOD go_docking->link
 EXPORTING
 repid = gd_repid
 dynnr = '0100'
* CONTAINER =
 EXCEPTIONS
 OTHERS = 4.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
* ok-code field = GD_OKCODE
CALL SCREEN '0100'.
* Flow logic (no elements on screen):
* PROCESS BEFORE OUTPUT.
* MODULE STATUS_0100.
* PROCESS AFTER INPUT.
* MODULE USER_COMMAND_0100.
END-OF-SELECTION.
*& Module STATUS_0100 OUTPUT
* text
MODULE status_0100 OUTPUT.
SET PF-STATUS 'STATUS_0100'.
* SET TITLEBAR 'xxx'.
CALL METHOD go_grid->refresh_table_display
* EXPORTING
* IS_STABLE =
* I_SOFT_REFRESH =
 EXCEPTIONS
 finished = 1
 OTHERS = 2.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
ENDMODULE. " STATUS_0100 OUTPUT
*& Module USER_COMMAND_0100 INPUT
* text
MODULE user_command_0100 INPUT.
TRANSLATE gd_okcode TO UPPER CASE.
* Fetch changes on ALV grid
go_grid->check_changed_data( ).
CASE gd_okcode.
 WHEN 'BACK' OR
 'END' OR
 'CANC'.
 SET SCREEN 0. LEAVE SCREEN.
 WHEN 'DUMMY'. " do nothing but pass PAI -> list refresh at PBO
 WHEN OTHERS.
ENDCASE.
CLEAR: gd_okcode.
ENDMODULE. " USER_COMMAND_0100 INPUT
*& Form BUILD_FIELDCATALOG_KNB1
* text
* --> p1 text
* <-- p2 text
FORM build_fieldcatalog .
* define local data
DATA:
 ls_fcat TYPE lvc_s_fcat.
CALL FUNCTION 'LVC_FIELDCATALOG_MERGE'
 EXPORTING
* I_BUFFER_ACTIVE =
 i_structure_name = 'KNB1'
* I_CLIENT_NEVER_DISPLAY = 'X'
* I_BYPASSING_BUFFER =
* I_INTERNAL_TABNAME =
 CHANGING
 ct_fieldcat = gt_fcat
 EXCEPTIONS
 inconsistent_interface = 1
 program_error = 2
 OTHERS = 3.
IF sy-subrc <> 0.
* MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
* WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
ENDIF.
" Set required fields editable
LOOP AT gt_fcat INTO ls_fcat
 WHERE ( fieldname = 'ZUAWA' OR
 fieldname = 'BUSAB' ).
 ls_fcat-edit = abap_true.
 MODIFY gt_fcat FROM ls_fcat.
ENDLOOP.
DELETE gt_fcat WHERE ( fieldname = 'ZINRT' ).
ENDFORM. " BUILD_FIELDCATALOG
*& Form SET_LAYOUT
* text
* --> p1 text
* <-- p2 text
FORM set_layout .
CLEAR: gs_layout.
gs_layout-cwidth_opt = abap_true.
gs_layout-zebra = abap_true.
** gs_layout-stylefname = 'CELLTAB'.
ENDFORM. " SET_LAYOUT
Regards,
Uwe

Wrong messagetype while processing in an alv grid event

Hello,
a brief discription of my problem:
I am processing a standard SAP form "PERIODE_PRUEFEN" which calls the function "READ_CUSTOMIZED_MESSAGE". The routine is called inside an event-handler of the ALV Grid event 'user_command'. The messagetype is selected from a customising table 'T100C'. Despite the messagetype 'W' the program is always aborted with an 'E' message.
What I have tried so far:
1. I debugged the SAP standard transaction 'fb08' which runs exactly the same functions with the same values and it works.
2. I changed the messagetype in the debugger - no success
3. I searched the SAP notes, but theres nothing about my problem
I guess the problem is somewhere in the ALV Grid event, because this is the only difference between the SAP standard an my program. Maybe the message is processed wrong while beeing called within an event.
It would be great to get some useful hints to solve this problem

Hi,
The ABAP runtime environment handles messages according to the type declared in the MESSAGE statement and the context in which the message was sent.
The behaviour of message type 'W' in a dialog is different from a report program.
Run demo program DEMO_MESSAGES, select Main Program, Type 'W' and execute. You will get an error message instead of warning message.
This behaviour is well documeneted in the on-line help for MESSAGE statement.
Regards,
Rao A

ALV Grid output in background Job

Hello everyone,
Can someonen plz tell me if I execute my report (with Grid ALV Display) in background (sy-batch not initial ) , will the ALV Grid be displayed ?
If no, then in order to show success do I have to 'WRITE' the success message ?
Thanks

Hello,
The grid will be generated as a list & spool will be generated. REUSEALVGRID* FM handles this explicitly no need to code for it.
You do not need to use WRITE for this
Also FYI for OO ALV you have to code for the batch handling: [CNTL_ERROR while running a report in background mode|CNTL_ERROR while running a report in background mode]
BR,
SUhas
Edited by: Suhas Saha on Jan 18, 2010 4:52 PM

Displaying the field symbol result in ALV GRID

hi.
I have a requirement to display the field symbol in ALV GRID. I am getting a error 'FIELD SYMBOL NOT YET BEEN ASSIGNED' when i am calling the 'REUSE ALV GRID DISPLAY'. Can any one help me out..

I have a requirement that i have to display all the GL indicators as a field.
For that i have created a dynamic internal table so that based upon the GL indicators available in the database table i can create a dynamic internal table with GL indicators as the fieldnames.
Now i want to populate the corresponding amount with respect to the GL indicators in the dynamic internal table.
For ex.
I have a database table as follows:
Vendor Id GL indicators Amount
1000 A 2000
1000 S 3000
I have to created a field symbol as follows
Vendor Id A S
1000 2000 3000.
Now my requirement is that i want this values to be displayed in ALV GRID.
At the point of calling REUSE ALV GRID DISPLAY i am getting the error field symbol is not yet been assigned..

How can I get the selected rows from two ALV grids at the same time?

I have a program that uses two ALV grids in one dialog screen. I'm using the OO ALV model (SALV* classes).
The user can select any number of rows from each grid. Then, when a toolbar pushbutton is pressed, I'd have to retrieve the selected rows from both grids and start some processing with these rows.
It is no problem to assign event handlers to both grids, and use the CL_SALV_TABLE->GET_SELECTIONS and CL_SALV_SELECTIONS->GET_SELECTED_ROWS methods to find out which rows were marked by the user. Trouble is, this only works when I raise an event in each grid separately, for instance via an own function that I added to the grid's toolbar. So, I can only see the selected rows of the same grid where such an event was raised.
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.
As it is right now, I can have an own button in both grid's toolbar, select the rows, click on the extra button in each grid (this will tell me what entries were selected per grid). Then, I'd have to click on a third button (the one in the dialog screen's toolbar), and process the selected rows from both grids.
How can I select the rows, then click on just one button, and process the marked entries from both grids?
Is it somehow possible to raise an event belonging to each grid programmatically, so that then the corresponding CL_SALV_SELECTIONS->GET_SELECTED_ROWS will work?
Thanks.

Hello Tamas ,
If I try to do this in the PBO of the dialog screen (that contains the two grids), the result of CL_SALV_SELECTIONS->GET_SELECTED_ROWS will be empty, as the program does not recognize the marked entries in the grids. Also, an event for grid1 does not see the selected rows from grid2 either.--->
is it possible to have a check box in each grid & get the selected lines in PAI of the screen ?
regards
prabhu

Need to be displayed in ALV grid

Dear All,
Below is my Program's code which is working accordingly. But in this code I am generating output as Basic list display. But I want my output to be displayed in ALV only. So from where I will start. Where to add code for Alv in my existing code. Can anybody help me out on the same.
Regards,
Abhay.
REPORT zfi_temp_rfkopr00
 MESSAGE-ID FR
 LINE-SIZE 132
 NO STANDARD PAGE HEADING.
Report Name : Vendor Open Items Ageing Report
Purpose : This report displays the Vendor Open Items based on
different Ageing days (Calculated by taking the Base
Line date and the days mentioned in Payment Terms)
D A T A B A S E T A B L E S D E C L A R A T I O N
TABLES: lfa1, " Vendor Master (General)
t001, " Company Codes
rfpdo.
I N T E R N A L T A B L E S D E C L A R A T I O N S *
Internal Table for Vendor Open Items Data
DATA: BEGIN OF int_bsik OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
shkzg LIKE bsik-shkzg, " Dr/Cr Indicator
belnr LIKE bsik-belnr, " Document Number
xblnr LIKE bsik-xblnr, " Ref Doc No
blart LIKE bsik-blart, " Document Type
zfbdt LIKE bsik-zfbdt, " Base Line Date
zbd1t LIKE bsik-zbd1t, " Due date1
zbd2t LIKE bsik-zbd2t, " Due Date2
zbd3t LIKE bsik-zbd3t, " Due Date3
waers LIKE bsik-waers, " Currency
dmbtr LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_bsik.
Internal Table for Amounts Sum Up Data
DATA: BEGIN OF int_final OCCURS 0,
lifnr LIKE bsik-lifnr, " Vendor Number
name1 LIKE lfa1-name1, " Vendor Name
total1 LIKE bsik-dmbtr, " Amount in Local Curr
total2 LIKE bsik-dmbtr, " Amount in Local Curr
total3 LIKE bsik-dmbtr, " Amount in Local Curr
total4 LIKE bsik-dmbtr, " Amount in Local Curr
total5 LIKE bsik-dmbtr, " Amount in Local Curr
total6 LIKE bsik-dmbtr, " Amount in Local Curr
total LIKE bsik-dmbtr, " Amount in Local Curr
END OF int_final.
D A T A D E C L A R A T I O N S
DATA : v_flag, " Flag
v_gtotal1 LIKE bsik-dmbtr, " Amount Totals
v_gtotal2 LIKE bsik-dmbtr, " Amount Totals
v_gtotal3 LIKE bsik-dmbtr, " Amount Totals
v_gtotal4 LIKE bsik-dmbtr, " Amount Totals
v_gtotal5 LIKE bsik-dmbtr, " Amount Totals
v_gtotal6 LIKE bsik-dmbtr, " Amount Totals
v_gtotal LIKE bsik-dmbtr, " Amount Totals
v_subtotal1 LIKE bsik-dmbtr, " Amount Totals
v_subtotal2 LIKE bsik-dmbtr, " Amount Totals
v_subtotal3 LIKE bsik-dmbtr, " Amount Totals
v_subtotal4 LIKE bsik-dmbtr, " Amount Totals
v_subtotal5 LIKE bsik-dmbtr, " Amount Totals
v_subtotal6 LIKE bsik-dmbtr, " Amount Totals
v_subtotal LIKE bsik-dmbtr, " Amount Totals
v_date LIKE bsik-zfbdt, " Due Date
v_tage1(4), " Age 30 days
v_tage2(4), " Age 60 days
v_tage3(4), " Age 90 days
v_fir(15), " Column Text1
v_sec(15), " Column Text2
v_thir(15), " Column Text3
v_four(17), " Column Text4
v_fidd(4), " Days field1
v_sedd(4), " Days field2
v_thdd(4), " Days field3
v_fodd(4), " Days field4
v_str TYPE sy-lisel, " String
v_str1(11), " String
v_tage(3), " String
v_date1(10). " Date field
R A N G E D E C L A R A T I O N S
RANGES: r_date1 FOR bsik-zfbdt, " Date Range 1
r_date2 FOR bsik-zfbdt, " Date Range 2
r_date3 FOR bsik-zfbdt, " Date Range 3
r_date4 FOR bsik-zfbdt. " Date Range 4
S E L E C T I O N S C R E E N *
SELECTION-SCREEN BEGIN OF BLOCK b1 WITH FRAME TITLE text-001.
SELECT-OPTIONS: s_lifnr FOR lfa1-lifnr. "Vendor account
PARAMETERS: p_bukrs LIKE t001-bukrs. "Co. Code
SELECTION-SCREEN END OF BLOCK b1.
SELECTION-SCREEN BEGIN OF BLOCK b2 WITH FRAME TITLE text-002.
PARAMETERS: p_allgst LIKE rfpdo-allgstid OBLIGATORY DEFAULT sy-datum.
"Open items at key date
SELECTION-SCREEN END OF BLOCK b2.
SELECTION-SCREEN BEGIN OF BLOCK b3 WITH FRAME TITLE text-003.
PARAMETERS: p_tage1 LIKE rfpdo1-allgfael DEFAULT '30',
p_tage2 LIKE rfpdo1-allgfael DEFAULT '60',
p_tage3 LIKE rfpdo1-allgfael DEFAULT '90',
p_tage4 LIKE rfpdo1-allgfael DEFAULT '120'.
SELECTION-SCREEN END OF BLOCK b3.
A T S E L E C T I O N S C R E E N *
AT SELECTION-SCREEN.
Validate the screen fields
PERFORM validate_flds.
S T A R T O F S E L E C T I O N *
START-OF-SELECTION.
Fetch main data
PERFORM fetch_data.
T O P O F P A G E
Header
TOP-OF-PAGE.
PERFORM header.
E N D O F P A G E
Footer
END-OF-PAGE.
ULINE.
T O P O F P A G E D U R I N G L I N E S E L E C T I O N *
Top of Page in Secondary List
TOP-OF-PAGE DURING LINE-SELECTION.
PERFORM header1.
A T L I N E S E L E C T I O N *
AT LINE-SELECTION.
Perform Line Selections
PERFORM line_selection.
E N D O F S E L E C T I O N
END-OF-SELECTION.
List generation
PERFORM basic_list.
*& Form validate_flds
Validation of Selection Screen fields
FORM validate_flds .
Validate Vendor Code
CLEAR lfa1-lifnr.
SELECT lifnr UP TO 1 ROWS
INTO lfa1-lifnr
FROM lfa1
WHERE lifnr IN s_lifnr AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e000 WITH 'Invalid Vendor Code range'(023).
ENDIF.
Validate Company Code
CLEAR t001-bukrs.
SELECT bukrs UP TO 1 ROWS
INTO t001-bukrs
FROM t001
WHERE bukrs = p_bukrs AND
spras = sy-langu.
ENDSELECT.
IF sy-subrc <> 0.
 MESSAGE e021. " Invalid Company Code range
ENDIF.
IF ( p_tage1 > p_tage2 ) OR ( p_tage1 > p_tage3 ) OR
( p_tage1 > p_tage4 ).
 MESSAGE e999 WITH 'Column 1 greater'(004)
 'than Column# 2 or 3 or 4'(005).
ENDIF.
*column 2
IF ( p_tage2 > p_tage3 ) OR ( p_tage1 > p_tage4 ).
 MESSAGE e999 WITH 'Column 2 greater'(006)
 'than Column# 3 or 4'(007).
ENDIF.
*column3
IF ( p_tage3 > p_tage4 ).
 MESSAGE e999 WITH 'Column 3 greater'(008)
 'than Column#4'(009).
ENDIF.
ENDFORM. " validate_flds
*& Form fetch_data
Fetching Data from Database Tables
FORM fetch_data .
Date Range Population
r_date1-sign = 'I'.
r_date1-option = 'BT'.
r_date1-low = p_allgst.
r_date1-high = r_date1-low + p_tage1.
APPEND r_date1.
r_date2-sign = 'I'.
r_date2-option = 'BT'.
r_date2-low = r_date1-high + 1.
r_date2-high = r_date1-low + p_tage2.
APPEND r_date2.
r_date3-sign = 'I'.
r_date3-option = 'BT'.
r_date3-low = r_date2-high + 1.
r_date3-high = r_date1-low + p_tage3.
APPEND r_date3.
r_date4-sign = 'I'.
r_date4-option = 'BT'.
r_date4-low = r_date3-high + 1.
r_date4-high = r_date1-low + p_tage4.
APPEND r_date4.
Select the Vendor Open Items data from BSIK
SELECT l~lifnr
l1~name1
b~waers
b~dmbtr
b~zfbdt
b~zbd1t
b~zbd2t
b~zbd3t
b~belnr
b~xblnr
b~shkzg
b~blart
INTO CORRESPONDING FIELDS OF TABLE int_bsik
FROM lfb1 AS l INNER JOIN lfa1 AS l1
ON llifnr = l1lifnr
INNER JOIN bsik AS b
ON llifnr = blifnr AND
lbukrs = bbukrs
WHERE l~lifnr IN s_lifnr AND
l~bukrs = p_bukrs AND
b~zfbdt LE p_allgst.
IF sy-subrc <> 0.
 MESSAGE i000 WITH 'No Data found'(027).
ENDIF.
Removing the date limit to get the due items in the past
DELETE int_bsik WHERE
( blart NE 'RE' AND blart NE 'KR' ) OR
shkzg NE 'H'.
SORT int_bsik BY lifnr.
ENDFORM. " fetch_data
*& Form header
Display the Report Columns
FORM header .
v_tage1 = p_tage1 + 1.
v_tage2 = p_tage2 + 1.
v_tage3 = p_tage3 + 1.
v_fidd = p_tage1.
v_sedd = p_tage2.
v_thdd = p_tage3.
v_fodd = p_tage4.
MOVE v_fodd0(4) TO v_fodd1(3).
v_fodd+0(1) = space.
CONCATENATE '1 to'(010) v_fidd INTO v_fir.
CONCATENATE v_tage1 ' to '(011) v_sedd INTO v_sec.
CONCATENATE v_tage2 ' to '(011) v_thdd INTO v_thir.
CONCATENATE v_tage3 ' to '(011) space v_fodd INTO v_four.
Standard header
CLEAR: v_date1, v_str, v_str1, v_tage.
WRITE p_allgst TO v_date1.
MOVE p_tage4 TO v_tage.
CONCATENATE '>' v_tage text-025 INTO v_str1.
CONCATENATE
'Summary of Ageing Analysis for Vendor Open Invoices as on'(013)
v_date1 INTO v_str SEPARATED BY space.
CALL FUNCTION 'Z_STANDARD_HEADER'
 EXPORTING
 title1 = 'Saudi International Petrochemical Company'(012)
 title2 = v_str.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1 sy-vline, 13 sy-vline, 49 sy-vline,
50(101) 'Invoices Due For(In Days)'(014) CENTERED,
151 sy-vline, 168 sy-vline .
WRITE :/1 sy-vline, 2(11) 'Vendor#'(015) CENTERED,
13 sy-vline ,14(35) 'Vendor Name'(016) CENTERED,
49 sy-vline,
50(101) sy-uline,151 sy-vline,
152(16) 'Total'(017) CENTERED,
168 sy-vline.
WRITE : /1 sy-vline,13 sy-vline, 49 sy-vline,
50(16) v_fir CENTERED, 66 sy-vline,
67(16) v_sec CENTERED, 83 sy-vline,
84(16) v_thir CENTERED, 100 sy-vline,
101(16) v_four CENTERED, 117 sy-vline,
118(16) v_str1 CENTERED, 134 sy-vline,
135(16) 'Already Overdue'(018) CENTERED,151 sy-vline,
168 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(168) sy-uline.
ENDFORM. " header
*& Form basic_list
Display the Basic List
FORM basic_list .
NEW-PAGE LINE-SIZE 168.
LOOP AT int_bsik.
 CLEAR v_date.
 IF int_bsik-zbd3t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd3t.
 ELSE.
 IF int_bsik-zbd2t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd2t.
 ELSE.
 v_date = int_bsik-zfbdt + int_bsik-zbd1t.
 ENDIF.
 ENDIF.
 IF int_bsik-zbd1t = ' '.
 v_date = int_bsik-zfbdt.
 ENDIF.
 IF v_date IN r_date1.
 int_final-total1 = int_final-total1 + int_bsik-dmbtr.
 ELSEIF v_date IN r_date2.
 int_final-total2 = int_final-total2 + int_bsik-dmbtr.
 ELSEIF v_date IN r_date3.
 int_final-total3 = int_final-total3 + int_bsik-dmbtr.
 ELSEIF v_date IN r_date4.
 int_final-total4 = int_final-total4 + int_bsik-dmbtr.
 ELSEIF v_date > r_date4-high.
 int_final-total5 = int_final-total5 + int_bsik-dmbtr.
 ELSEIF v_date < p_allgst.
 int_final-total6 = int_final-total6 + int_bsik-dmbtr.
 ENDIF.
 AT END OF lifnr.
 v_flag = 1.
 ENDAT.
 IF v_flag = 1.
 int_final-lifnr = int_bsik-lifnr.
 int_final-name1 = int_bsik-name1.
 int_final-total = int_final-total1 + int_final-total2 +
 int_final-total3 + int_final-total4 + int_final-total5 +
 int_final-total6.
 APPEND int_final.
 v_gtotal1 = v_gtotal1 + int_final-total1.
 v_gtotal2 = v_gtotal2 + int_final-total2.
 v_gtotal3 = v_gtotal3 + int_final-total3.
 v_gtotal4 = v_gtotal4 + int_final-total4.
 v_gtotal5 = v_gtotal5 + int_final-total5.
 v_gtotal6 = v_gtotal6 + int_final-total6.
 v_gtotal = v_gtotal + int_final-total.
 WRITE: /1 sy-vline,
 2 int_final-lifnr COLOR 4 INTENSIFIED ON,
 13 sy-vline,
 14 int_final-name1 COLOR 4 INTENSIFIED ON,
 49 sy-vline.
 DATA : v_rem.
 v_rem = sy-tabix MOD 2.
 IF v_rem NE 0.
 FORMAT COLOR 2 INTENSIFIED.
 WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
 66 sy-vline,
 67 int_final-total2 CURRENCY int_bsik-waers,
 83 sy-vline,
 84 int_final-total3 CURRENCY int_bsik-waers,
 100 sy-vline,
 101 int_final-total4 CURRENCY int_bsik-waers,
 117 sy-vline,
 118 int_final-total5 CURRENCY int_bsik-waers,
 134 sy-vline,
 135 int_final-total6 CURRENCY int_bsik-waers,
 151 sy-vline,
 152 int_final-total CURRENCY int_bsik-waers,
 168 sy-vline.
 ELSE.
 WRITE : 50 int_final-total1 CURRENCY int_bsik-waers,
 66 sy-vline,
 67 int_final-total2 CURRENCY int_bsik-waers,
 83 sy-vline,
 84 int_final-total3 CURRENCY int_bsik-waers,
 100 sy-vline,
 101 int_final-total4 CURRENCY int_bsik-waers,
 117 sy-vline,
 118 int_final-total5 CURRENCY int_bsik-waers,
 134 sy-vline,
 135 int_final-total6 CURRENCY int_bsik-waers,
 151 sy-vline,
 152 int_final-total CURRENCY int_bsik-waers,
 168 sy-vline.
 ENDIF.
 FORMAT COLOR OFF.
 HIDE int_final.
 CLEAR int_final.
 v_flag = 0.
 ENDIF.
 AT LAST.
 WRITE : /1(168) sy-uline.
 FORMAT COLOR 3 INTENSIFIED.
 WRITE : /1 sy-vline, 2(47) 'GRAND TOTAL'(022) CENTERED,
 49 sy-vline, 50 v_gtotal1 CURRENCY int_bsik-waers,
 66 sy-vline, 67 v_gtotal2 CURRENCY int_bsik-waers,
 83 sy-vline, 84 v_gtotal3 CURRENCY int_bsik-waers,
 100 sy-vline,101 v_gtotal4 CURRENCY int_bsik-waers,
 117 sy-vline,118 v_gtotal5 CURRENCY int_bsik-waers,
 134 sy-vline,135 v_gtotal6 CURRENCY int_bsik-waers,
 151 sy-vline,152 v_gtotal CURRENCY int_bsik-waers,
 168 sy-vline.
 HIDE : v_gtotal1,
 v_gtotal2,
 v_gtotal3,
 v_gtotal4,
 v_gtotal5,
 v_gtotal6,
 v_gtotal.
 ENDAT.
 FORMAT COLOR OFF.
ENDLOOP.
WRITE : /1(168) sy-uline.
ENDFORM. " basic_list
*& Form line_selection
When double clicked on the line display the seconday list
FORM line_selection .
NEW-PAGE LINE-SIZE 206.
Sy-lsind = 1.
DATA : v_rem,v_cnt LIKE sy-tabix.
v_cnt = 0.
SORT int_bsik BY belnr zfbdt.
LOOP AT int_bsik WHERE lifnr EQ int_final-lifnr.
 v_rem = v_cnt MOD 2.
 CLEAR v_date.
 IF int_bsik-zbd3t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd3t.
 ELSE.
 IF int_bsik-zbd2t <> ' '.
 v_date = int_bsik-zfbdt + int_bsik-zbd2t.
 ELSE.
 v_date = int_bsik-zfbdt + int_bsik-zbd1t.
 ENDIF.
 ENDIF.
 IF int_bsik-zbd1t = ' '.
 v_date = int_bsik-zfbdt.
 ENDIF.
 IF v_rem NE 0.
 FORMAT COLOR 2 INTENSIFIED.
 WRITE :/1 sy-vline, 2 int_bsik-belnr,
 12 sy-vline,13 int_bsik-lifnr,
 23 sy-vline,24 int_bsik-name1,
 59 sy-vline,60 int_bsik-xblnr,
 76 sy-vline,77 int_bsik-zfbdt,
 87 sy-vline.
 WRITE : 104 sy-vline,121 sy-vline,
 138 sy-vline,155 sy-vline,
 172 sy-vline, 189 sy-vline,
 190 int_bsik-dmbtr CURRENCY int_bsik-waers,
 206 sy-vline.
 IF v_date IN r_date1.
 v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
 WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date2.
 v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
 WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date3.
 v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
 WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date4.
 v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
 WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date > r_date4-high.
 v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
 WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date < p_allgst.
 v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
 WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ENDIF.
 FORMAT COLOR OFF.
 ELSE.
 WRITE :/1 sy-vline, 2 int_bsik-belnr,
 12 sy-vline,13 int_bsik-lifnr,
 23 sy-vline,24 int_bsik-name1,
 59 sy-vline,60 int_bsik-xblnr,
 76 sy-vline,77 int_bsik-zfbdt,
 87 sy-vline.
 WRITE : 104 sy-vline,121 sy-vline,
 138 sy-vline,155 sy-vline,
 172 sy-vline,189 sy-vline,
 190 int_bsik-dmbtr CURRENCY int_bsik-waers,
 206 sy-vline.
 IF v_date IN r_date1.
 v_subtotal1 = v_subtotal1 + int_bsik-dmbtr.
 WRITE : 88 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date2.
 v_subtotal2 = v_subtotal2 + int_bsik-dmbtr.
 WRITE : 105 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date3.
 v_subtotal3 = v_subtotal3 + int_bsik-dmbtr.
 WRITE : 122 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date IN r_date4.
 v_subtotal4 = v_subtotal4 + int_bsik-dmbtr.
 WRITE : 139 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date > r_date4-high.
 v_subtotal5 = v_subtotal5 + int_bsik-dmbtr.
 WRITE : 156 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ELSEIF v_date < p_allgst.
 v_subtotal6 = v_subtotal6 + int_bsik-dmbtr.
 WRITE : 173 int_bsik-dmbtr CURRENCY int_bsik-waers.
 ENDIF.
 ENDIF.
 FORMAT COLOR OFF.
 v_cnt = v_cnt + 1.
ENDLOOP.
WRITE : /1(206) sy-uline.
v_subtotal = v_subtotal1 + v_subtotal2 + v_subtotal3
+ v_subtotal4 + v_subtotal5 + v_subtotal6.
FORMAT COLOR 3 INTENSIFIED.
WRITE : /1 sy-vline,
2(85) 'Total'(017) CENTERED CURRENCY int_bsik-waers ,
87 sy-vline,
88 v_subtotal1 CURRENCY int_bsik-waers,
104 sy-vline,
105 v_subtotal2 CURRENCY int_bsik-waers,
121 sy-vline,
122 v_subtotal3 CURRENCY int_bsik-waers,
138 sy-vline,
139 v_subtotal4 CURRENCY int_bsik-waers,
155 sy-vline,
156 v_subtotal5 CURRENCY int_bsik-waers,
172 sy-vline,
173 v_subtotal6 CURRENCY int_bsik-waers,
189 sy-vline,
190 v_subtotal CURRENCY int_bsik-waers,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
CLEAR : v_subtotal,v_subtotal1,v_subtotal2,v_subtotal3,
v_subtotal4,v_subtotal5,v_gtotal1,v_gtotal2,v_gtotal3,
v_gtotal4, v_gtotal5,v_gtotal,v_subtotal6,v_gtotal6.
ENDFORM. " line_selection
*& Form header1
Secondary List Header
FORM header1 .
Standard header
CLEAR: v_date1, v_str, v_str1, v_tage.
WRITE p_allgst TO v_date1.
MOVE p_tage4 TO v_tage.
CONCATENATE '>' v_tage text-025 INTO v_str1.
CONCATENATE
'Details of Ageing Analysis for Vendor Open Invoices as on'(024)
v_date1 INTO v_str SEPARATED BY space.
CALL FUNCTION 'Z_STANDARD_HEADER'
 EXPORTING
 title1 = 'Saudi International Petrochemical Company'(012)
 title2 = v_str.
FORMAT COLOR 1 INTENSIFIED.
WRITE :/1(206) sy-uline.
WRITE :/1 sy-vline,12 sy-vline ,
23 sy-vline,59 sy-vline,76 sy-vline,87 sy-vline,
88(101) 'Invoices Due For(In Days)'(014) CENTERED,
189 sy-vline,206 sy-vline.
WRITE : /1 sy-vline, 2(10) 'Doc Number'(021) CENTERED,
12 sy-vline, 13(10) 'Vendor#'(015) CENTERED,
23 sy-vline, 24(35) 'Vendor Name'(016) CENTERED,
59 sy-vline, 60(16) 'Ref invoice#'(019) CENTERED,
76 sy-vline, 77(10) 'Inv dt'(020) CENTERED,
87 sy-vline, 88(101) sy-uline,
189 sy-vline,190(16) 'Total'(017) CENTERED,
206 sy-vline.
WRITE : /1 sy-vline, 12 sy-vline,
23 sy-vline,59 sy-vline,
76 sy-vline,87 sy-vline,
88(16) v_fir CENTERED, 104 sy-vline,
105(16) v_sec CENTERED, 121 sy-vline,
122(16) v_thir CENTERED, 138 sy-vline,
139(16) v_four CENTERED, 155 sy-vline,
156(16) v_str1 CENTERED,
172 sy-vline,
173(16) 'Already Overdue'(018) CENTERED,
189 sy-vline,
206 sy-vline.
FORMAT COLOR OFF.
WRITE : /1(206) sy-uline.
ENDFORM. " header1

Hi Abhay,
After moving the whole data into final internal table, pass that internal table to function module REUSE_ALV_GRID_DISPLAY.
before that you need to build field catalog and have to build layout with all the required columns.
Go through the below links for your reference.
Simple ALV report
http://www.sapgenie.com/abap/controls/alvgrid.htm
http://wiki.ittoolbox.com/index.php/Code:Ultimate_ALV_table_toolbox
ALV
1. Please give me general info on ALV.
http://www.sapfans.com/forums/viewtopic.php?t=58286
http://www.sapfans.com/forums/viewtopic.php?t=76490
http://www.sapfans.com/forums/viewtopic.php?t=20591
http://www.sapfans.com/forums/viewtopic.php?t=66305 - this one discusses which way should you use - ABAP Objects calls or simple function modules.
2. How do I program double click in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=11601
http://www.sapfans.com/forums/viewtopic.php?t=23010
3. How do I add subtotals (I have problem to add them)...
http://www.sapfans.com/forums/viewtopic.php?t=20386
http://www.sapfans.com/forums/viewtopic.php?t=85191
http://www.sapfans.com/forums/viewtopic.php?t=88401
http://www.sapfans.com/forums/viewtopic.php?t=17335
4. How to add list heading like top-of-page in ABAP lists?
http://www.sapfans.com/forums/viewtopic.php?t=58775
http://www.sapfans.com/forums/viewtopic.php?t=60550
http://www.sapfans.com/forums/viewtopic.php?t=16629
5. How to print page number / total number of pages X/XX in ALV? http://www.sapfans.com/forums/viewtopic.php?t=29597 (no direct solution)
6. ALV printing problems. The favourite is: The first page shows the number of records selected but I don't need this.
http://www.sapfans.com/forums/viewtopic.php?t=64320
http://www.sapfans.com/forums/viewtopic.php?t=44477
7. How can I set the cell color in ALV? http://www.sapfans.com/forums/viewtopic.php?t=52107
8. How do I print a logo/graphics in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=81149
http://www.sapfans.com/forums/viewtopic.php?t=35498
http://www.sapfans.com/forums/viewtopic.php?t=5013
9. How do I create and use input-enabled fields in ALV?
http://www.sapfans.com/forums/viewtopic.php?t=84933
http://www.sapfans.com/forums/viewtopic.php?t=69878
10. How can I use ALV for reports that are going to be run in background?
http://www.sapfans.com/forums/viewtopic.php?t=83243
http://www.sapfans.com/forums/viewtopic.php?t=19224
11. How can I display an icon in ALV? (Common requirement is traffic light icon).
http://www.sapfans.com/forums/viewtopic.php?t=79424
http://www.sapfans.com/forums/viewtopic.php?t=24512
12. How can I display a checkbox in ALV? http://www.sapfans.com/forums/viewtopic.php?t=88376
http://www.sapfans.com/forums/viewtopic.php?t=40968
http://www.sapfans.com/forums/viewtopic.php?t=6919
Check this for basic concepts of OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/abap%20objects/abap%20code%20sample%20to%20learn%20basic%20concept%20of%20object-oriented%20programming.doc
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20display%20data%20in%20alv%20grid%20using%20object%20oriented%20programming.doc
Tabstrip
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20for%20tab%20strip%20in%20alv.pdf
Editable ALV
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/abap%20code%20samples/alv%20grid/abap%20code%20sample%20to%20edit%20alv%20grid.doc
Tree
http://www.sapdevelopment.co.uk/reporting/alv/alvtree/alvtree_usrint.htm
General Tutorial for OOPS
https://www.sdn.sap.com/irj/servlet/prt/portal/prtroot/com.sap.km.cm.docs/library/webas/abap/an%20easy%20reference%20for%20alv%20grid%20control.pdf
http://www.sapdevelopment.co.uk/reporting/alvhome.htm
http://www.sap-img.com/abap/what-is-alv-programming.htm
http://www.sap-img.com/abap-function.htm
http://www.geocities.com/mpioud/Abap_programs.html
http://www.sapdevelopment.co.uk/reporting/alv/alvtree%5Calvtree_basic.htm
http://esnips.com/doc/ad20dca9-6182-4903-8d8f-96a66dc8590c/ALV.pdf
http://www.sap-img.com/abap-function.htm
Go thru these programs they may help u to try on some hands on
ALV Demo program
BCALV_DEMO_HTML
BCALV_FULLSCREEN_DEMO ALV Demo: Fullscreen Mode
BCALV_FULLSCREEN_DEMO_CLASSIC ALV demo: Fullscreen mode
BCALV_GRID_DEMO Simple ALV Control Call Demo Program
BCALV_TREE_DEMO Demo for ALV tree control
BCALV_TREE_SIMPLE_DEMO
BC_ALV_DEMO_HTML_D0100
The common features of report are column alignment, sorting, filtering, subtotals, totals etc. To implement these, a lot of coding and logic is to be put. To avoid that we can use a concept called ABAP List Viewer (ALV).
This helps us to implement all the features mentioned very effectively.
Using ALV, We can have three types of reports:
1. Simple Report
2. Block Report
3. Hierarchical Sequential Report
There are some function modules which will enable to produce the above reports without much effort.
All the definitions of internal tables, structures and constants are declared in a type-pool called SLIS.
1. SIMPLE REPORT.
The important function modules are
a. Reuse_alv_list_display
b. Reuse_alv_fieldcatalog_merge
c. Reuse_alv_events_get
d. Reuse_alv_commentary_write
e. Reuse_alv_grid_display
A. REUSE_ALV_LIST_DISPLAY : This is the function module which prints the data.
The important parameters are :
I. Export :
i. I_callback_program : report id
ii. I_callback_pf_status_set : routine where a user can set his own pf status or change the functionality of the existing pf status
iii. I_callback_user_command : routine where the function codes are handled
iv. I_structure name : name of the dictionary table
v. Is_layout : structure to set the layout of the report
vi. It_fieldcat : internal table with the list of all fields and their attributes which are to be printed (this table can be populated automatically by the function module REUSE_ALV_FIELDCATALOG_MERGE
vii. It_events : internal table with a list of all possible events of ALV and their corresponding form names.
II. Tables :
i. t_outtab : internal table with the data to be output
B. REUSE_ALV_FIELDCATALOG_MERGE : This function module is used to populate a fieldcatalog which is essential to display the data in ALV. If the output data is from a single dictionary table and all the columns are selected, then we need not exclusively create the field catalog. Its enough to mention the table name as a parameter(I_structure name) in the REUSE_ALV_LIST_DISPLAY. But in other cases we need to create it.
The Important Parameters are :
I. Export :
i. I_program_name : report id
ii. I_internal_tabname : the internal output table
iii. I_inclname : include or the report name where all the dynamic forms are handled.
II Changing
ct_fieldcat : an internal table with the type SLIS_T_FIELDCAT_ALV which is
declared in the type pool SLIS.
C. REUSE_ALV_EVENTS_GET : Returns table of possible events for a list type
Parameters :
I. Import :
Et_Events : The event table is returned with all possible CALLBACK events
for the specified list type (column 'NAME'). For events to be processed by Callback, their 'FORM' field must be filled. If the field is initialized, the event is ignored. The entry can be read from the event table, the field 'FORM' filled and the entry modified using constants from the type pool SALV.
II. Export :
I_List_type :
0 = simple list REUSE_ALV_LIST_DISPLAY
1 = hierarchcal-sequential list REUSE_ALV_HIERSEQ_LIST_DISPLAY
2 = simple block list REUSE_ALV_BLOCK_LIST_APPEND
3 = hierarchical-sequential block list
REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_COMMENTARY_WRITE : This is used in the Top-of-page event to print the headings and other comments for the list.
Parameters :
I. it_list_commentary : internal table with the headings of the type slis_t_listheader.
This internal table has three fields :
Typ : H header, S selection , A - action
Key : only when typ is S.
Info : the text to be printed
E. REUSE_ALV_GRID_DISPLAY : A new function in 4.6 version, to display the results in grid rather than as a preview.
Parameters : same as reuse_alv_list_display
This is an example for simple list.
2. BLOCK REPORT
This is used to have multiple lists continuously.
The important functions used in this report are:
A. REUSE_ALV_BLOCK_LIST_INIT
B. REUSE_ALV_BLOCK_LIST_APPEND
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
D. REUSE_ALV_BLOCK_LIST_DISPLAY
A. REUSE_ALV_BLOCK_LIST_INIT
Parameters:
I. I_CALLBACK_PROGRAM
II. I_CALLBACK_PF_STATUS_SET
III. I_CALLBACK_USER_COMMAND
This function module is used to set the default gui status etc.
B. REUSE_ALV_BLOCK_LIST_APPEND
Parameters :
Export :
I. is_layout : layout settings for block
II. it_fieldcat : field catalog
III. i_tabname : internal table name with output data
IV. it_events : internal table with all possible events
Tables :
i. t_outtab : internal table with output data.
This function module adds the data to the block.
Repeat this function for all the different blocks to be displayed one after the other.
C. REUSE_ALV_BLOCK_LIST_HS_APPEND
This function module is used for hierarchical sequential blocks.
D. REUSE_ALV_BLOCK_LIST_DISPLAY
Parameters : All the parameters are optional.
This function module display the list with data appended by the above function.
Here the functions REUSE_ALV_FIELDCATALOG_MERGE, REUSE_ALV_EVENTS_GET, REUSE_ALV_COMMENTARY_WRITE can be used.
3. Hierarchical reports :
Hierarchical sequential list output.
The function module is
A. REUSE_ALV_HIERSEQ_LIST_DISPLAY
Parameters:
I. Export:
i. I_CALLBACK_PROGRAM
ii. I_CALLBACK_PF_STATUS_SET
iii. I_CALLBACK_USER_COMMAND
iv. IS_LAYOUT
v. IT_FIELDCAT
vi. IT_EVENTS
vii. i_tabname_header : Name of the internal table in the program containing the
output data of the highest hierarchy level.
viii. i_tabname_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
ix. is_keyinfo : This structure contains the header and item table field
names which link the two tables (shared key).
II. Tables
i. t_outtab_header : Header table with data to be output
ii. t_outtab_item : Name of the internal table in the program containing the
output data of the lowest hierarchy level.
slis_t_fieldcat_alv : This internal table contains the field attributes. This internal table can be populated automatically by using REUSE_ALV_FIELDCATALOG_MERGE.
Important Attributes :
A. col_pos : position of the column
B. fieldname : internal fieldname
C. tabname : internal table name
D. ref_fieldname : fieldname (dictionary)
E. ref_tabname : table (dictionary)
F. key(1) : column with key-color
G. icon(1) : icon
H. symbol(1) : symbol
I. checkbox(1) : checkbox
J. just(1) : (R)ight (L)eft (C)ent.
K. do_sum(1) : sum up
L. no_out(1) : (O)blig.(X)no out
M. outputlen : output length
N. seltext_l : long key word
O. seltext_m : middle key word
P. seltext_s : short key word
Q. reptext_ddic : heading (ddic)
R. ddictxt(1) : (S)hort (M)iddle (L)ong
S. datatype : datatype
T. hotspot(1) : hotspot
Reward points for helpful answers,
Satish

Functionality of Checkbox in ALV Grid Report

Hi Experts,
I created a ALV grid report with the checkbox as my first coloum and other fields as shown below. Initially, my ALV report displays as below. It is working fine till here.
checkbox customer material quantity UOM Sales Order Delivery
 C1 M1 1 KG
 C1 M2 2 KG
 C2 M1 1 KG
 C2 M2 2 KG
 C3 M1 1 KG
 C3 M2 2 KG
 C3 M3 3 KG
 C4 M1 1 KG
 C5 M5 1 KG
I have created a push button on application toolbar for creating sales order and delivery using bapi's. When I click on my pushbutton, as of now it creates the SO and delivery for the first customer C1 and updates my Internal table with the sales order number and delivery number. If I need to create sales order for the second customer I need to run my ALV report again and so on for 3rd, 4th and 5th customers. It is also working fine till here.
checkbox customer material quantity UOM Sales Order Delivery
 C1 M1 1 KG SO1 DEL1
 C1 M2 2 KG SO1 DEL1
 C2 M1 1 KG
 C2 M2 2 KG
 C3 M1 1 KG
 C3 M2 2 KG
 C3 M3 3 KG
 C4 M1 1 KG
 C5 M5 1 KG
Need help on this:
When I select the check boxes as shown below and when I click the push button to create SO and Delivery then my program should create sales order and delivery for all the checked ones as shown below. What is the condition do I need to put here for selecting the checkbox.
checkbox customer material quantity UOM Sales Order Delivery
X C1 M1 1 KG SO1 DEL1
X C1 M2 2 KG SO1 DEL1
 C2 M1 1 KG
 C2 M2 2 KG
X C3 M1 1 KG SO3 DEL3
X C3 M2 2 KG SO3 DEL3
X C3 M3 3 KG SO3 DEL3
 C4 M1 1 KG
X C5 M5 1 KG SO5 DEL5
I would really appreciate if somebody could help me / guide me on this. I will also post my code if someone needs to understand what I am doing exactly.
Thanks.

You need to use OO ABAP
Use Class the class 1) CL_GUI_ALV_GRID, 2) CL_GUI_CUSTOM_CONTAINER
Create Sceen and container on same screen.
Check following COde it used for printing purpose.
Using AFTER_USER_COMMAND Event you will find Check box selected entries.
Capture those in another internal Table and use it for SO Creation
DATA: O_GRID TYPE REF TO CL_GUI_ALV_GRID,
 O_CONTAINER TYPE REF TO CL_GUI_CUSTOM_CONTAINER,
 T_FCAT TYPE LVC_T_FCAT,
 CONTAINER(15) TYPE C VALUE 'ET_CONTAINER'.
 CLASS EVENT_CLASS DEFINITION
CLASS EVENT_CLASS DEFINITION.
PUBLIC SECTION.
 METHODS: BEFORE_COMMAND FOR EVENT AFTER_USER_COMMAND OF CL_GUI_ALV_GRID IMPORTING E_UCOMM,
 DOUBLE_CLICK_N FOR EVENT DOUBLE_CLICK OF CL_GUI_ALV_GRID IMPORTING E_ROW E_COLUMN,
 TOOLBAR FOR EVENT TOOLBAR OF CL_GUI_ALV_GRID IMPORTING E_OBJECT.
ENDCLASS. "EVENT_CLASS DEFINITION
 CLASS EVENT_CLASS IMPLEMENTATION
CLASS EVENT_CLASS IMPLEMENTATION.
METHOD BEFORE_COMMAND.
 IF E_UCOMM = 'PRINT'.
 CLEAR : W_FLAG.
 T_FINAL2 = T_FINAL.
 SORT T_FINAL2 BY COL_CHK .
 DELETE T_FINAL2 WHERE COL_CHK = ' '.
 IF NOT T_FINAL2 IS INITIAL.
 LOOP AT T_FINAL2 INTO WA_FINAL.
 IF W_FLAG IS INITIAL.
Does some of modification/s in control parameters
 W_CONTROL_PARAM-NO_OPEN = 'X'.
 W_CONTROL_PARAM-NO_CLOSE = 'X'.
 W_CONTROL_PARAM-PREVIEW = 'X'.
 W_CONTROL_PARAM-NO_DIALOG = SPACE.
 W_OUTPUT_OPTIONS-TDNEWID = 'X'.
 W_OUTPUT_OPTIONS-TDIMMED = SPACE.
Opens the smartform print-job
 CALL FUNCTION 'SSF_OPEN'
 EXPORTING
 OUTPUT_OPTIONS = W_OUTPUT_OPTIONS
 CONTROL_PARAMETERS = W_CONTROL_PARAM
 EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 USER_CANCELED = 4
 OTHERS = 5.
 IF SY-SUBRC EQ 0.
 W_FLAG = 'X'.
 ELSE.
 LEAVE LIST-PROCESSING.
 ENDIF.
 ENDIF.
 IF W_FLAG = 'X'.
 CALL FUNCTION 'SSF_FUNCTION_MODULE_NAME'
 EXPORTING
 FORMNAME = 'ZFORM_BIW_PRINT'
 IMPORTING
 FM_NAME = LF_FM_NAME
 EXCEPTIONS
 NO_FORM = 1
 NO_FUNCTION_MODULE = 2
 OTHERS = 3.
 IF SY-SUBRC <> 0.
 ENDIF.
 IF SY-SUBRC = 0.
 CALL FUNCTION LF_FM_NAME
 EXPORTING
 CONTROL_PARAMETERS = W_CONTROL_PARAM
 V_VBELN = WA_FINAL-VBELN
 WA_FINAL = WA_FINAL.
 TABLES
 T_FINAL = T_FINAL.
 ELSE.
 MESSAGE ID SY-MSGID TYPE SY-MSGTY NUMBER SY-MSGNO
 WITH SY-MSGV1 SY-MSGV2 SY-MSGV3 SY-MSGV4.
 ENDIF.
 ENDIF.
 ENDLOOP.
 * Close the smartform print job
 IF W_FLAG EQ 'X'.
 CALL FUNCTION 'SSF_CLOSE'
 EXCEPTIONS
 FORMATTING_ERROR = 1
 INTERNAL_ERROR = 2
 SEND_ERROR = 3
 OTHERS = 4.
 ENDIF.
 ENDIF.
 ENDIF.
ENDMETHOD. "BEFORE_COMMAND

Job processing - Result ALV GRID

Similar Messages

Maybe you are looking for