JSP solution for database administration

I am searching for a simple solution with JSP 1.2 to administer HSQLDB on a server.
Thank you in advance.

test

Similar Messages

JSP source for the Administration tools?

Hi,
I would like to know where I can find the JSP source for the Administration tools? I downloaded WLCS 3.1.1 a while ago and I thought that it would come as part of the installation but it didn't. Is there any other place to get the source files?
Thanks!
Hugo Penafiel
marchFIRST
Cupertino, CA USA

Hello Hugi,
The WLPS/WLCS admin tools are a webapp called "tools". See your weblogic.properties file:
# Defines the admin tools Web Application.
weblogic.httpd.webApp.tools=C:/wlcs/wlcs311/server/webapps/admin/tools.war
(my installation dir is "C:/wlcs/wlcs311")
Because you have the Web Application, you have the JSP source code (see http://www.weblogic.com/docs51/classdocs/webappguide.html )
Ture Hoefner
BEA Systems, Inc.
2590 Pearl St.
Suite 110
Boulder, CO 80302
www.bea.com
[att1.html]

Pre-requisite for lab setup for database administration track.

Hi, does anybody know what setup is required to participate in Lab for database administration track on Feb 11?

The code you have in the rules file looks like it is incorrect. PCon would not be defined automatically and would therefore return zero. I think what you are actually looking for is something like:
Call Hs.Con ("",HS.Node.PCon(""),"")
Note that you can determine if the consolidation rules are used from you metadata under AppSettings. Look for the setting called ConsolidationRules. If you set this to Y, it uses the rules under Sub Consolidate(), if you set it N, it will automatically consolidate even if you have nothing under Sub Consolidate().
Further, you can affect what gets consolidated in the metadata. Some of your accounts etc. may not be set correctly. Some things to check:
For Accounts, make sure that IsConsolidated is checked and the AccountType is correct
Also for Accounts, ensure that EnableCustom1Aggr ... is checked
Finally, if the Entities have different currencies, check if you are getting data up to [Parent Total]. If not, the problem is your translation and not your consolidation.

I have a solution for the Administrator Error

Hi all, I have also been having serious problems with the message "An error occurred while installing Adobe AIR. Installation may not be allowed by your administrator. Please contact your administrator".
I have found a SOLUTION that has worked for me!!! I went on to filehippo.com and searched for Adobe Air, they list all previous releases of the software with direct download links. The first one I tried was "Adobe Air 2.0.2.12610" here is the link,
http://www.filehippo.com/download_adobe_air/7728/ and it INSTALLED no problem and it even checked for updates and now it is running the latest version.
Please let me know if this works for you as I have tried sooooooooo hard to get my BBC iplayer up and running again.
Regards,
twotrucks

Hi there!
I assume its a workgroup environment.
Please check the following on the machines:
All machines must be on the same workgroup. (work group name must be identical).
All machines must be on the same subnet.
All machines must have file and printer sharing enabled.
On all machines start the following services and set it to automatic start:
Function Discovery Provider host
Function Discovery Resource Publication
SSDPSRV
UPNPHost
5.Run this command in CMD (All in the same line). It will open a windows , Remove all cached credentials and do this on all machines. undll32.exe keymgr.dll,KRShowKeyMgr
Please Give me feed back after doing the steps.
Thanks
Farhad

Solution for "Database Connector Error: 'Unexpected'" issue

**NOTE -- reposting as the previous post became corrupted.
Some customers have encountered an issue in Crystal Reports when attempting to report from Salesforce.com data.
The problem looks like this. You are able to log in successfully to your Salesforce.com instance. However, when you attempt to expand your Salesforce.com connection, you get an error that states - Database Connector Error: 'Unexpected' - and you are unable to proceed.
This problem occurs because the JVM Heap Size setting for the Salesforce.com driver is not large enough to handle the number of objects (tables) in your Salesforce.com instance. This problem is easily resolved by increasing this setting and then restarting Crystal Reports.
The default CRConfig.xml path for CR 2008 is : C:\Program Files\Business Objects\Common\4.0\java
You will find the JVM setting in <DataDriverCommon> section.
<JVMMaxHeap>64000000</JVMMaxHeap>
<JVMMinHeap>32000000</JVMMinHeap>
It will vary as to how much you need to increase your heap size to access your Salesforce.com instance. If you change the JVMMaxHeap to 128000000 that should be sufficient for most users but you may need to increase it further.

test

I Forgot Oracle XE Password for Database administrator user "system"

Hello,
is there a chance to get my password back for the database administraor account with the username "system" or to reset it otherwise? Unfortunately I have no change to remember it. Is there help for that problem?

If you would like to change password:
you login to sys and then change password of some users if you need
linux:
export ORACLE_SID=XE
export ORACLE_HOME=<ORACLE_PATH>
sqlplus / as sysdba
SQL> alter user system identified by <new_pass>;
window:
set ORACLE_SID=XE
set ORACLE_HOME=<ORACLE_PATH>
sqlplus / as sysdba
SQL> alter user system identified by <new_pass>;
Re: Oracle XE default username / password

SQL Server 2012 - Wat Is The Best Solution For Creating a Read Only Replicated/AlwaysOn Database

Hi there I was wondering if someone may have a best recommendation for the following requirement I have with regards setting up a third database server for reporting?
Current Setup
SQL Server 2012 Enterprise setup at two sites (Site A & Site B).
Configured to use AlwaysOn Availability groups for HA and DR.
Installed on Windows 2012 Servers.
This is all working and failover works fine and no issues. So…
Requirement
A third server needs to be added for the purpose of reporting, to be located on another site (Site C) possibly in another domain. This server needs to have a replicated read only copy of the live database from site A or Site B, whichever is in use. The Site
C reporting database should be as up-to-date to the Site A or Site B database as possible – preferably within a few seconds anyway….
Solution - What I believe are available to me
I believe I can use AlwaysOn and create a ReadOnly replica for the Site C. If so do I assume Site C needs to have the Enterprise version of SQL server i.e. to match Site A & Site B?
Using log shipping which if I am correct means the Site C does not need to be an Enterprise version.
Any help on the best solution for this would be greatly appreciated.
Thanks, Steve

for always on - all nodes should be part of one windows cluster..if there site C is on different domain - I do not think it works.
Logshipping works --as long as the sql on site C is is same or higher version(sql 2012 or above). you can only do read only.
IMHo, if you can make site C in the same domain then, Always is better solution else log shipping
also, if your database has enterprise level features such as - partitonin, data compression -- you cannot restore the database on lower editions- so you need to have enterprise edition.
Hope it Helps!!

I have a button in JSP page inside an UIWebView by pressing the button i want to run another existing iPhone native application in background only.Do anyone have a solution for this.

I have a button in JSP page inside an UIWebView by pressing the button i want to run another
existing iPhone native application in background only.Do anyone have a solution for this.

Sounds like a virus.... I hope it's not...
Launching Other Apps within an iPhone

What are solutions for a way-too-big database?

Hi guys!
I'm a software developer and not very good in database designing. One day, I was asked something like this :
"For example, there is a company with a web application. One day, the database for that application is way too big, caused performance issues and others, what is the solution for that application database?"
At first, I thought that was about using multiple database with single app. But I don't know if I was right.
I want to ask that what are the solutions? If it's "multiple database" then what should I do? Using two connection to 2 database simutaneously?
I appreciate any replies. Thanks!

847617 wrote:
Thanks Lubiez Jean-Val... for your links.
I've got some more advices like :
- "transferring workload to another database using different techniques to copy the data from original db"
- "redesign of the database"
So that means we use 2 different databases?Sometimes it is deemed desirable to keep only fairly recent data on the OLTP database, where the normal transaction activity happens, and replicate the data to another database that also contains historical data. This second database is used for heavy reporting tasks.
And "redesign"?As in, design it from scratch and do it right this time. Make sure all data relations are properly defined to Third Normal Form; make sure all data is typed properly (use DATE columns for dates, NUMBER columns for numbers, etc); make sure you have designed effective indexing; make sure you use the capabilities of the rdbms and do NOT just use it as a data dump.
See http://www.amazon.com/Effective-Oracle-Design-Osborne-ORACLE/dp/0072230657/ref=sr_1_3?s=books&ie=UTF8&qid=1301257486&sr=1-3
are they really good solutions?Like most everything else, "It depends"
It depends on if the proposed solutions are implemented properly and address the root problem. The root problem (or even perceived problem) hasn't yet been defined. You've just assumed that at some undefined point the database becomes "way-too-big" and will cause some sort of problem.
It's assumed that we don't have or can't use partitioning.
And why is that assumed? Yes, you have to have a version of Oracle that supports it, and it is an extra cost license. But like everything else, you and your management have to do a hard-nosed cost/benefit analysis. You may think you can't afford the cost of implementing partitioning, but it may be that you can't afford the expenses derived from NOT implementing it. I don't know what the case is for you, but you and your management should consider the factors instead of just rejecting in out of hand.
:):)...You are making me - a student so excited about the history. From slides rule to the moon....
Edited by: 847617 on Mar 27, 2011 10:01 AMEdited by: EdStevensTN on Mar 27, 2011 3:24 PM

How to use taglibs in JSP for Database access

Hi
Could any one please tell me how to use taglibs in JSP for Database access
with regrds
Jojo

This is a sample how to connect to a MySQL database with JSTL 1.0:
<%@ page contentType="text/html; charset=iso-8859-1" language="java" import="java.sql.*" errorPage="" %>
<%@ taglib uri="http://java.sun.com/jstl/sql" prefix="sql" %>
<%@ taglib uri="http://java.sun.com/jstl/core" prefix="c" %>
<!DOCTYPE html PUBLIC "-//W3C//DTD XHTML 1.0 Transitional//EN" "http://www.w3.org/TR/xhtml1/DTD/xhtml1-transitional.dtd">
<html xmlns="http://www.w3.org/1999/xhtml">
<head>
<meta http-equiv="Content-Type" content="text/html; charset=iso-8859-1" />
<title>JSTL MySQL</title>
<link href="styles.css" rel="stylesheet" type="text/css" />
</head>
<body>
<c:catch var="e">
<sql:setDataSource var="datasource" url="jdbc:mysql://Your_Server_Name_Here/You_Schema_Here"
                       user="Your_Username_Here" password="Your_Password_Here"
                       driver="com.mysql.jdbc.Driver"/>
<c:out value="datasource= ${datasource}, Class = ${driver.class}"/>
<br />
<br />
<sql:query var="deejays" dataSource="${datasource}">SELECT * FROM Your_Table_Name_Here</sql:query>
<table>
<%-- Get the column names for the header of the table --%>
<c:forEach var="columnName" items="${deejays.columnNames}"><th><c:out value="${columnName}"/></th></c:forEach>
<tbody>
<%-- Get the value of each column while iterating over rows --%>
<c:forEach var="row" items="${deejays.rows}">
<tr><c:forEach var="column" items="${row}">
        <td><c:out value="${column.value}"/></td>
      </c:forEach>
</tr>
</c:forEach>
</tbody>
</table>
</c:catch>
<br />
<br />
<c:if test="${e!=null}"><span class="error">Error</span>�
<c:out value="${e}" />
</c:if>
</body>
</html>And this thread might help you:
http://forum.java.sun.com/thread.jspa?threadID=639471&tstart=44

This is my Jsp code for image upload in database:

This is my Jsp code for image upload in database:
-----------Upload.jsp----------------
<html>
<head>
</head>
<body bgproperties="fixed" bgcolor="#CCFFFF">
<form method="POST" action="UploadPicture.jsp" enctype="multiform/form-data">
<%! int update=0; %>
<%@ page import="java.util.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="java.text.*" %>
<%@ page import="java.sql.Date" %>
<%@ page import="java.io.*"%>
<%@ page language = "java" %>
<%
try
String ct="3";
String path;
File image=new File(request.getParameter("upload"));
path=request.getParameter("upload");
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:itPlusElectronics","","");
PreparedStatement pstmt=con.prepareStatement("insert into graphics values(?,?,?)");
pstmt.setString(2,path);
pstmt.setString(3,ct);
InputStream is=new FileInputStream(path);
pstmt.setBinaryStream(1, is, (int)(image.length()));
int s=pstmt.executeUpdate();
if(s>0)
out.println("Uploaded");
else
%>
unsucessfull
<%}
is.close();
pstmt.close();
catch(Exception e)
}%>
</p>
<p><br>
<img src="UploadedPicture.jsp">image</img>
<p></p>
</form>
</body>
</html>
My database name is itPlusElectronics and the table name is "graphics".
I have seen as a result of the above code that the image is stored in database as "Long binary data". and database table is look like as follows-------
picture path id
Long binary data D:\AMRIT\1-1-Picture.jpg 3
To retrive and display i use this JSP code as--
------------------------UploadedPicture.jsp------------------------------
<html>
<head>
</head>
<body bgproperties="fixed" bgcolor="#CCFFFF">
<%! int update=0; %>
<%@ page import="java.util.*" %>
<%@ page import="java.sql.*" %>
<%@ page import="java.text.*" %>
<%@ page import="java.io.*"%>
<%@ page language = "java" %>
<%@page import="javax.servlet.ServletOutputStream"%>
<%
try
String path;
path=request.getParameter("upload1");
Class.forName("sun.jdbc.odbc.JdbcOdbcDriver");
Connection con = DriverManager.getConnection("jdbc:odbc:itPlusElectronics","","");
PreparedStatement pst = con.prepareStatement("SELECT * FROM graphics WHERE id ='3'");
// pst.setString(3, id);
ResultSet rs = pst.executeQuery();
path=rs.getString("path");
if(rs.next()) {
byte[] bytearray = new byte[4096];
int size=0;
InputStream sImage;
sImage = rs.getBinaryStream(1);
response.reset();
response.setContentType("image/jpeg");
response.addHeader("Content-Disposition","filename=path");
while((size=sImage.read(bytearray))!= -1 )
response.getOutputStream().write(bytearray,0,size) ;
response.flushBuffer();
sImage.close();
rs.close();
catch(Exception e)
%>
</body>
</html>
Now after browsing a jpg image file from client side and pressing submit button ;
I am unable display the image in the Upload.jsp file.Though I use
<img src="UploadedPicture.jsp">image</img> HTML code in Upload.jsp
file .
Now I am unable to find out the mistakes which is needed for displaying the picture in the Upload.jsp page..
If any one can help with the proper jsp code to retrive and display the image ,please please help me !!!!!!!!!!!!!!!!!!!!!!!!!!

dketcham wrote:
cotton.m wrote:
>
2) I'm looking at how you called stuff, and you're trying to call the jsp file as an image? That jsp isn't the source of the image, just a page linking to an image. I think if you really want to do things that way you're going to need to just include that jsp within the jsp you're calling it from (or you can do it the easy way, and if you have the information to get the path of the image you want, you could simply call the image from the first jsp you posted)This is incorrect.
There are two JSPs. The second when called will (if it worked) return the source of an image as stored in the database.even when called with <img src=xx.jsp>??
Yes.
If any of what I say next seems obvious or otherwise negative I apologize, just trying to explain and I don't know what you know vs what you don't.
The link in the src is just a URL not a filetype. So just because it ends with JSP does not mean it has to return HTML. The content type is determined by the browser using the Content-Type header returned by the server in the HTTP response. In this case the header is set to be a jpeg so that's what the browser will attempt to interpret the content part of the response as.
So in fact one is not limited to just HTML or images but whatever content type you would like to return (that the browser can understand anyway). This could be HTML or it could be an image of some type or it could be a PDF or it could be an Excel spreadsheet. All you have to do in the JSP is set the header appropriately and then send content that is actually in that format.
This does not just apply to JSP by the way but all other web programming languages. You can do similar things to produce the same results in PHP, Perl, ASP etc.
The only JSP/Servlet complication is whether or not doing this in a JSP is a "good" idea but I am not an expert enough at that to make a definitive statement. Mostly though JDBC in a JSP is a no-no.

One Book or Document for start on Database Administration

Hi
Before anything thanks to everybody that contribute on this forum.
May you introduce me book or document for start on Oracle database administration?
Thanks in advance

Besides the 2-Day dba guide, you should have a read of the Concepts and Administrator guide from the docs at http://tahiti.oracle.com . In addition, read these following books as well,
http://www.amazon.com/Beginning-Oracle-Database-11g-Administration/dp/1590599683/ref=sr_1_1?ie=UTF8&qid=1331391080&sr=8-1
http://www.amazon.com/Expert-Oracle-Database-Architecture-Programming/dp/1430229462/ref=sr_1_3?s=books&ie=UTF8&qid=1331391103&sr=1-3
Good luck!
HTH
Aman....

What is teh best solution for my Problem??

hello everyone
i'am planing to develop a Patient Management System (PMS)
since i 'm not that guru in the J technologies i would like you to get me some help with this decision:
what is the best solution for developeing an intranet "PMS" which should handles data (connection to postgresql) and runs some algorithm (for planing puropose) im background ??
1 developeing a web based solution (servlet and jsp and and ..)
2 developeing an application wich will be manging everything ??? (a kind of programm with its own GUI)
3 you may have an other idea solution and ill be gald for any advices
ps sorry for my english its not that great ;)

Web applications are all the rage these days and IMO rightly so as they greatly reduce deployment cost and headaches.
They do have some drawbacks though which for you might be important.
I can imagine that sooner or later (probably sooner in my experience) a requirement to interface with hardware installed on the client machines will emerge.
Whether this is a barcode scanner or a chipcard reader to get client information from some form of card issued to the client, or maybe a label printer to print out labels for medication bottles doesn't matter, you need to access the client machine directly.
Web applications have great difficulty with that (in fact, it's all but impossible).
You could go for an applet solution but that's contrived at best and still leaves the same problems.
So in your situation an old-fashioned client/server application (maybe using web services to communicate with the serverside application) is likely the best longterm solution.
You'd have the database remote so everyone has access to the same data, being accessed through processes run on the server and called by the clients. These can also do most of the business logic, leaving the clients relatively dumb responsible mainly for data validation and entry and presentation of the results.

Oracle Installation or Uninstallation Solutions For Windows 95/98/2000/ME/NT/XP

You must read carefully the following steps here. If you previously installed any Oracle's products on your machine, I strongly recommend you to clean up thoroughly before install the new products.
================================================================
Uninstallation
The easiest way to remove ALL traces of Oracle software, for an 8i installation, is:
(1) Using regedit, remove the key \\HKEY_LOCAL_MACHINE\\SOFTWARE\ORACLE.
(2) Remove all the Oracle services (usually called Ora-something) from \\HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services.
(3) Go to the ORACLE_HOME directory (usually C:\Oracle\Ora81). Go to the BIN directory beneath this. Rename the file OCIW32.DLL to something like OCIW32.OLD.
(4) Reboot your box.
(5) Once you have logged on again, delete the directories C:\Program Files\Oracle and C:\Oracle.
(6) Right-click on My Computer, select Properties->Environment. Edit the environmental variable PATH to remove all refernces to files in the two directories you have just deleted.
(7) Remove the Oracle folders from your Start menu.
*** Obviously, using regedit on your machine always entails risks, and I won't be held responsible if you end up trashing your system. However, the above procedure is one I have used many times with complete success. You have been warned! ;) ***
As to logging on, the "standard" Oracle accounts are:
SYS/change_on_install (SYSDBA - database owner)
SYSTEM/manager (Owns various VIEWs and utility PACKAGEs)
and (optionally):
SCOTT/tiger (Training account containing some sample tables)
If you're using PO8i on the local machine, you shouldn't need to worry about setting up NET*8 (Oracle's networking protocols)
=================================================================
Windows 95 and 98
This will remove all Oracle products, Oracle services, and Oracle registry entries from your computer.
Complete the following steps to create a Clean Machine. Backup any relevant databases before proceeding!
On Windows 95 and Windows 98:
1. Ensure you shutdown your Oracle. Right click on the Oracle Icon in the toolbar and click on the shutdown option.
2. Un-install all your Oracle products if possible. Use universal installer to do that. Ignore this step if you dont have universal installer on your machine.
3. In regedit, go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE.
4. Delete the ORACLE key.
5. Edit your AUTOEXEC.BAT file and remove your %ORACLE_HOME%\bin and JRE paths from the path setting.
6. From the Windows Explorer (or from the command prompt), delete the Oracle directory (Oracle Base).
7. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
8. Delete Icons from <system_drive>: \Windows\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Windows\StartMenu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
9. Reboot your computer.
On Windows NT:
1. Ensure you are logged in as a user with Administrator privileges.
2. Stop all Oracle Services through Control Panel Services. Use universal installer to un-install your Oracle products. Ignore un-install if you dont have universal installer on your machine.
3. Using regedit (at the command prompt, type regedit), go to HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE and delete the ORACLE key.
4. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services that begin with ORACLE.
5. Open HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application, and remove all keys under HKEY_LOCAL_MACHINE\SYSTEM\CurrentControlSet\Services\EventLog\Application that begin with ORACLE.
6. Close regedit.
7. From the Control Panel, open System.
8. If JRE was installed by Oracle, remove the %ORACLE_HOME%\BIN path and the JRE path. For example, you may see a path similar to this one: C:\ORACLE\ORAxx\BIN;G: \Program Files\Oracle\jre\1.1.7\bin. Go to Start > Control Panel > System > Environment tab. Click on the system variable path and modify the path.
9. Delete Icons from <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle - <HOME> and <system_drive>:\Winnt\Profiles\All Users\Start Menu\Programs\Oracle Installation Products. Where <HOME> is the previous HOME name.
10. Delete <system_drive>:\Program Files\Oracle (from the Windows NT Explorer or from the command prompt).
11. Reboot your computer.
12. Delete all ORACLE_BASE directories (You can find the Oracle homes listed in HKEY_LOCAL_MACHINE\SOFTWARE\ORACLE\ORACLE_HOMES).
================================================================
Doc ID:
Note:131299.1
Subject:
Oracle Installer 8.1.X Hangs on Machines with Pentium 4
Processors
Type:
ALERT
Status:
PUBLISHED
Content
Type:
TEXT/PLAIN
Creation
Date:
02-JAN-2001
Last
Revision Date:
18-APR-2001
This alert was modified 16-January-2001 by specifying specific
Oracle Universal
Installer Versions in the the Versions Affected section.
Oracle Universal Installer (OUI) for 8.1.x Hangs on Machines
with Pentium 4
Processors
~~~~~~~~~~~~~~~~~~
Versions Affected
~~~~~~~~~~~~~~~~~
Oracle 8.1.5
============
Oracle Universal Installer 1.6.0.9.0
Oracle 8.1.6
=============
Oracle Universal Installer 1.7.0.19.0
Oracle 8.1.7
==============
Oracle Universal Installer 1.7.1.9.0
Platforms Affected
~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000
and NetWare platforms are confirmed to be affected.
Description
~~~~~~~~~~~
When installing Oracle Products with the Oracle Universal
Installer (8.1.x)
on machines that use the Sun JRE and Symmantec JIT, the
installer hangs.
Specifically for the Windows platform, the following version
of the Symmantec
JIT or earlier will encounter the failure:
Symantec Java! JustInTime Compiler Version 3.10.107 for JDK
1.2.
Details regarding this issue can be found at:
http://developer.intel.com/design/processor/future/manuals/knowni ssue.htm
How to determine if you have Symmantec Java for JDK 1.2:
1. Select the file "symcjit.dll" and right click on it.
2. Select Properties, then the Version tab.
3. Under Microsoft Windows*, the properties of the DLL are:
"Symantec Java! JustInTime Compiler Version 3.10.107 for
JDK 1.2 Copyright (C)
1996-99 Symantec Corporation Dynamic Link Library file".
DLLs older than this will also not work. "
Likelihood of Occurrence
~~~~~~~~~~~~~~~~~~~~~~~~
Any platform that uses the Intel Pentium 4 processor, with the
Sun JRE
and Symmantec JIT will encounter this problem. Windows NT,
Windows 2000 and NetWare platforms are confirmed to be
affected.
Possible Symptoms
~~~~~~~~~~~~~~~~~
The failure typically is that the affected application simply
terminates.
Workaround
~~~~~~~~~~
Not only will OUI be affected by this bug, most of the
post-install
configuration tools will also be affected. Running these
tools with "-nojit"
specified will avoid the hang, but it is not simple to specify
"-nojit" for
some of the products.
The following workaround works for the Windows operating
system:
a. Copy only the install directory from the CD to the hard
disk ,say, e:\temp.
b. Open oraparam.ini and make the following modifications
(Assuming CD
drive is f:)
* Change the "SOURCE=" line to use the full path to the CD
instead of a
relative path. (i.e., SOURCE=f:\stage\products.jar)
* Change the "JRE_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
JRE_LOCATION=f:\stage\Components\oracle\swd\jre\1.1.7\1\DataFiles
\Expanded)
* Change the "OUI_LOCATION" line to use the full path to the
CD instead of a
relative path. (i.e.,
OUI_LOCATION=f:\stage\Components\oracle\swd\oui\1.6.0.9.0\1\DataF
iles\Expanded
* Change the "JRE_MEMORY_OPTIONS" line to add "-nojit" as the
first argument.
(i.e., JRE_MEMORY_OPTIONS=-nojit -ms16m -mx32m)
^^^^^^
* Other entries should remain the same
c. Launch setup.exe from the temporary location on your hard
drive (i.e.
e:\temp\install\win32\setup.exe). This will use the
modified
oraparam.ini and pick up the information from the CD since
the absolute
locations are specified.
Choose a Custom install and choose not to create a database
during the
install. This way, the Database Configuration Assistant will
not be launched
during installation.
The Net8 Configuration Assistant will still be launched, and
there is no way
to suppress it. You will need to kill the Net8 Configuration
Assistant if it
hangs due to the bug. The installation still will have been
successful, and
you can run the DBCA and NetCA after installation.
To kill NetCA if it hangs during installation:
In the "Configuration Tools" window, highlight the "Net8
Configuration
Assistant" and click "Stop". If that does not work, look for
the most recent
JRE process using the Task Manager, and kill it manually.
NOTE: the OUI
itself will also have a jre process. Be sure to kill the one
with the most
recent date, which should be the jre process being used for
Net8CA, not the
one for OUI itself.
After killing the configuration tools and continuing through
the installation
to the "End of Installation" screen, you should modify the
configuration tools
to use "-nojit", then call the appropriate tools from the
Start Menu.
Once installation is complete, each of the following files in
the ORACLE_HOME
needs to be modified:
assistants\dbca\dbassist.cl
assistants\dbma\dbmig.cl
assistants\ifa\ifa.cl
bin\elogin.cl
bin\owm.cl
ldap\oidamdin\oidadmin.cl
network\tools\netasst.cl
network\tools\netca.cl
owm\install\instelogin.cl
owm\install\instowm.cl
Edit the contents of the above files to add "-nojit" as shown
below:
Command=("C:\Program Files\Oracle\jre\1.1.7\BIN\JREW" -nojit
-classpath ....
this is the only thing you need to add --> ^^^^^^
Then, launch the necessary tools, like Net8CA and DBCA from
the Start Menu.
Patches
~~~~~~~
Currently there is not a patched installer available to deal
with this
problem, the workaround listed above must be used.
References
~~~~~~~~~~
[BUG:1507768] INSTALLER FAILS WHEN RUNNING ON NEW PENTIUM 4
(IV) PROCESSORS
[BUG:1507946] INSTALLER FAILS WHEN RUNNING ON NEW INTEL
PENTIUM 4 (IV) PROCESSORS
@[BUG:1518935] SYMCJIT.DLL DOESN'T WORK WITH THE NEW P4
PROCESSORS
Oracle
Support Services.
Copyright (c) 1995,2000 Oracle Corporation. All Rights
Reserved. Legal Notices and Terms of Use.
================================================================
The solution of making a local copy of the installation CD on
the hard disk and renameing symcjit.dll to symcjit.old does
work to allow installation of Oracle Client 8.1.7 on a Pentium 4
This function is useful and you can find two file to rename
===============================================================
Windows ME
Solution to the installation of Oraclei8.1.7 PE in Windows Millennium
Oracle does not support installing version 8.1.7 PE into
Windows Millennium.
As an unsupported workaround, you may add the following line
to the [compatibility95] section of win.ini prior to
installation:
Jrew=0x00080000
After setup is complete, Oracle will recommend a reboot.
There is one additional step necessary prior to reboot;
Oracle may add a non-standard path statement to the
autoexec.bat file. Please modify this SET PATH
statement to use short-filenames if you find a quoted
LFN string represented as part of the path. You can
confirm that the path was merged successfully into the
registry after reboot by examining the PATH variable
in the registry at
HKLM\System\CurrentControlSet\Control\SessionManager\Environment
Symptoms of a missing Oracle path statement in the registry are that Net8 Easy Config will not launch.
Please note that Oracle does not support the use of this
product in Windows ME, but have authorized these workarounds
for testing purposes only.
===============================================================
Windows XP Home Edition
Oracle 8i is not certified on windows XP. Even if yes, it must be Windows XP Professional.
You can install Oracle8i on windows XP Home Edition, try like this:
1 - Copy your Oracle CD into hard disk in your
machine. For example Copy from oracle8i CD into C:\Oracle\ ...
2 - Search the two files named Symcjit.dll on the D drive (where you have copied Oracle8i. You can found them in (example):
C:\Oracle\stage\Components\oracle.swd.jre\1.1.7.30\1
\DataFiles\Expanded\jre\win32\bin\symcjit.dll
3 - Rename this file (Example): symcjit_back.dll (make sure to find two files and rename them)
4 - Execute the Oracle setup.exe from C:\Oracle\setup.exe
===============================================================
When Oracle 8i dies on the install or the installer hangs, here is the fix for this, make sure that you have Service Pack 2 installed.
1. \JRE\1.3.1\ From Sun. (You can download java program at http://java.sun.com/products/jdk/1.1/jre/download-jre-windows.html)
2. Install the java file.
There is also a problem in the installation disk.
3. Make a copy of the Oracle 8i disk on the local hard disk.
4. Do a search for the two files called symcjit.dll and rename them for example: symcjit.old.
5. Install Oracle from the win32 directory.
================================================================
PLEASE NOTE THAT ORACLE DOESN'T SUPPORT THE USE OF THOSE PRODUCTS IN WINDOWS ME, BUT HAVE AUTHORIZED THESE WORKAROUNDS FOR TESTING PURPOSES ONLY
Best Regards,
Beau Leo

Hi,Beau Leo, I am having problem installing Oracle9i Database Rel.2 on my pc.
I read the suggestion and solution you posted for fixing Oracle 8.1.x installation
probblem, and since my pc also hung at 48% while installing Oracle 9i software,
I wonder if the same problem in the Oracle8 Vs.Pentium4 also exists for Oracle9i.
I have Windows2000,256RAM, Pentium3 1Ghz, and 13.8 free diskspace. But the installation always
hangs at 48%, my computer will just shut down and restart automatically without
even showing an error message. I have tried installing the Enterprise edition for 3
times already but everytime encountered the same problem. I've also tried custom installation
by selecting not to create database, but it also hung.
Before I started each installation, I always made sure that my registry and environment
path are cleared and that all the partially-installed Oracle files are deleted.
I hope that you or anyone who has a solution for this problem could be so kindly to help me out.
Thank you in advance.
ailee

Dynamic Parameter Prompting for Database Connection Password When schedulin

I'm having problems with Dynamic Parameters when I try to schedule a report in InfoView.
I create the report in Crystal Reports XI and publish it to the Crystal Server. I go into CMC and under Process:Database set the correct data source and enter the server, database, user and password.
When the report is run I can choose a dynamic parameter and the reports runs fine - it's when I try to schedule the report and choose the parameter that I am asked to enter the user and password for the database.
If the parameter is static it's fine and I don't get prompted. Because I want the end-users to schedule their own reports I need to have the user and password embedded in the report.
From what I've read in the forums, there seems to be a lot of issues with dynamic parameters and database logons, and no real solutions. But this is just weird that it's only failing when I try to schedule the report!

I am having the same issue.
Issue started on 9/25/2008
Existing BO 11r2 installation including service pack 2
Windows Server 2003 Service pack 2
Existing scheduled reports do not exhibit this behaviour and run correctly.
Add new or update existing report. Log into the CMC as administrator and set process for database and parameters.
Exit CMC
log into Infoview. Click on report and run (as administrator OR as existing user with permissions) NO PROBLEM.
Log into Infoview as Administrator or existing users with permissions) as attempt to schedule report. All reports Any dynamic parameter and request for user name and password opens. Once the correct info is entered the report can be scheduled.
This is a new issue on our installation, we have been running without problems for over a year.
Any help appreciated.

JSP solution for database administration

Similar Messages

Maybe you are looking for