JTable cell content width
I have a JTable (actually it's a JXTreeTable but I don't think that matters), and I want to find the coordinate of the right side of the content in the furthest column to the right. Not the bounds of the cell, the bounds of the contents (text) of that cell. Same thing for the left side.
Put another way, I want to get the bounds of the contents of a row--not the whole row, but the actual text contents.
We were doing this for JTree and it was working by just getting JTree.getPathBounds(), but for a table, getting the cell bounds gets the size of the entire cell, not just the contents.
Thanks!
You could probably use the table.prepareRenderer(...) metthod to get the component doing the renderering and then get the preferred size of that component.
Similar Messages
-
Resizing the JTable Cell horizontal width
Sir/Madam,
How can i resize the JTable cell's horizontal width. I know the JTable's column width can be resized. I dont want to resize the entire JTable column. But i need to resize individual JTable cell's horizontal width. Thanks in advance.I think that's not possible. What kind of results are you expecting ? If the cells of a column are different widths, what are you going to do with the extra space of the narrower cells ?
What are you displaying in the cells ? Maybe you can narrow the contents of the cells, and not the cells. -
Setting alignment of cell content in jtable??
hi,
does anybody know how i can set the content of my jTable cells to the center of each cell. thanx, mischa.Did you search the forum???
Using keywords "+jtable +center" would be a good place to start. -
TableView auto resize columns based on header text width or cell content
Is there a method on the tableview or tablecolumn to automatically resize based on the content of the hearder or data?
If not what approach can used used with JavaFX to calculate the string width based on the current font?The table column size is inconsistent, I set the columns in the table view and the items in the initialize method. I execute a service and task from a button action that loads data into the list, if I don't reset the columns in the table view in the succeed method then each column is the same width regardless of the content in the cells. If I do reset the table columns in the succeed method then the columns are resized based on content.
I don't think it should be a requirement to reset the columns just to get the column widths to set based on the content in the cells. Is there a method on the table column or view that will resize the cells based on the cell content? I would prefer the largest value; column header content or the longest cell content for a column. -
Cell contents selected on focus in JTable
I'm new to swing and trying to get the contents of a JTable cell to be selected when the cell receives focus. I've looked at the TableCellEditor interface and the like, but I just can't seem to get the hang of how it all fits together. Any hits would be appreciated. Thanks.
There are several ways to do this, but here is one to get you started:
First, subclass DefaultCellEditor. Here, I have duplicated all the constructors from DefaultCellEditor but only modified the one used for text.
I have added a inner class, FocusEventHandler, to capture the focus events. In the focusGained method is the code to do the selectAll. (I use the invokeLater so that the selectAll happens after pending events are complete. A mouse click might be interpreted by the text box to position the cursor, so we want the selectAll to happen after that.)
Then, in the constructor for text, I save the text box so the focusGained method knows which text box to selectAll for, register the event handler, and (optionally) change the ClickCountToStart.
public class NewDefaultCellEditor extends javax.swing.DefaultCellEditor {
javax.swing.JTextField saveTextField = null;
// Event handler
public class FocusEventHandler implements java.awt.event.FocusListener {
public void focusGained(java.awt.event.FocusEvent e) {
javax.swing.SwingUtilities.invokeLater(new Runnable () {public void run() {saveTextField.selectAll();}});
public void focusLost(java.awt.event.FocusEvent e) {}
// Constructors
public NewDefaultCellEditor(javax.swing.JCheckBox checkBox) {
super(checkBox);
public NewDefaultCellEditor(javax.swing.JComboBox comboBox) {
super(comboBox);
public NewDefaultCellEditor(javax.swing.JTextField textField) {
super(textField);
saveTextField = textField; // save text field for later
textField.addFocusListener(new FocusEventHandler()); // register event handler
setClickCountToStart(1); // change # of mouse clicks to begin editing
}Now you just have to tell the table to use this Cell Editor. One way to do this is:
MyTable.getColumnModel().getColumn(0).setCellEditor(new NewDefaultCellEditor(new javax.swing.JTextField()));
(this sets the editor for column 0) -
Different jpopup menus items depending on content in a Jtable cell
Hi,
Is it possible if a popup menu have different items in it, depending on the content of a jtable cell??
I would be greatful if any one could point me in the right direction.
Thanks
VenusIn the mouse listener where you are displaying the popup, change it as appropriate before displaying it.
-
Jtable cell listening to mouse event source
Hi, I have a JTable with single cell selections enabled.
I can also get the mouseClicked event working, but the cure is worse than the illness, because every cell I click on will cause a jframe to pop-up.
Ideally only column 0 or 1 listens to the mouseClicked event.
Can someone please tell mehow to work that into the JTable cell (sorry for the tediously long code, its only a small part)
import javax.swing.JComponent;
...lots of import...
public class CCYTable extends JPanel
JTable newtable;
JLabel tableHeader;
public CCYFrame NewFrame;
private boolean DEBUG = false;
private int showInfoTimer = 10000; // info tip box will pop up for this period of time...
// if both column and row selection are enabled, then individual cell selection
// is also enabled.
private boolean ALLOW_COLUMN_SELECTION = true;
private boolean ALLOW_ROW_SELECTION = true;
private boolean clickForDetail = true; // click on cell to launch frame with detail
protected String[] colHeaderInfo =
{"Name of Instrument, move mouse to instrument for general detail of service.",
...lots of text...
// get values from database, use an "invisible column" for unique key
// description, conditions etc from Oracle...
String LoC = "Letter of Credit";
...more variable...
public void init()
//setSize(300,300);
tableHeader = new JLabel("uy or Sell", JLabel.CENTER);
setLayout(new BorderLayout());
newtable = new JTable(new TableDefinition())
//Put cell info here, from Oracle CellInfo varchar2
public String getToolTipText (MouseEvent mevt)
String info = null;
java.awt.Point p = mevt.getPoint();
int rowIndex = rowAtPoint(p);
int colIndex = columnAtPoint(p);
int realColIndex = convertColumnIndexToModel(colIndex);
Object currentValue = getValueAt(rowIndex, colIndex);
if (realColIndex == 0)
{ if (currentValue.equals(LoC))
{ info = "Click to read general description of our \"" + LoC + "\" service." ;
... ideally I would like to work the mouseClicked listener in here but...
return info;
} // end of JComponent's method getToolTipText
//Put table header info
protected JTableHeader createDefaultTableHeader()
return new JTableHeader(columnModel)
public String getToolTipText(MouseEvent mevt)
String tip = null;
java.awt.Point p = mevt.getPoint();
int index = columnModel.getColumnIndexAtX(p.x);
int realIndex = columnModel.getColumn(index).getModelIndex();
return colHeaderInfo[realIndex];
if (clickForDetail)
newtable.addMouseListener(new MouseAdapter()
public void mouseClicked(MouseEvent mevt)
{ // ...but JTable wants it like this...
// launch a new pop-up to replace the tool tip box
NewFrame = new CCYFrame("blabla");
ToolTipManager.sharedInstance().setDismissDelay(showInfoTimer);
newtable.setPreferredScrollableViewportSize(new Dimension(770, 350));
JScrollPane scrollpane = new JScrollPane(newtable);
initColumnSizes(newtable);
enableCellSelection(newtable);
add("North", tableHeader);
add("Center", scrollpane);
* For sizing columns. If all column heads are wider than the column-cells'
* contents, then just use column.sizeWidthToFit().
private void initColumnSizes(JTable newtable)
TableDefinition tblmodel = (TableDefinition)newtable.getModel();
TableColumn column = null;
Component comp = null;
int headerWidth=0, cellWidth=0;
Object[] longValues = tblmodel.longValues;
TableCellRenderer headerRenderer = newtable.getTableHeader().getDefaultRenderer();
TableCellRenderer rightRenderer = new RightRenderer();
for (int i = 0; i < 7; i++)
column = newtable.getColumnModel().getColumn(i);
comp = headerRenderer.getTableCellRendererComponent(
null, column.getHeaderValue(),
false, false, 0, 0);
headerWidth = comp.getPreferredSize().width;
comp = newtable.getDefaultRenderer(tblmodel.getColumnClass(i)).
getTableCellRendererComponent(
newtable, longValues,
true, true, 0, i);
cellWidth = comp.getPreferredSize().width;
column.setPreferredWidth(Math.max(headerWidth, cellWidth));
TableColumn col2 = newtable.getColumnModel().getColumn(2);
col2.setCellRenderer( rightRenderer );
TableColumn col2Width = newtable.getColumnModel().getColumn(2);
col2Width.setPreferredWidth(2);
TableColumn col6 = newtable.getColumnModel().getColumn(6);
col6.setCellRenderer( rightRenderer );
TableColumn col6Width = newtable.getColumnModel().getColumn(6);
col6Width.setPreferredWidth(2);
}// end of method initColumnSizes
private void enableCellSelection(JTable newtable)
if (ALLOW_COLUMN_SELECTION)
if (ALLOW_ROW_SELECTION) {newtable.setCellSelectionEnabled(true);}
newtable.setColumnSelectionAllowed(true);
ListSelectionModel colSM = newtable.getColumnModel().getSelectionModel();
colSM.addListSelectionListener(new ListSelectionListener()
public void valueChanged(ListSelectionEvent lsevt)
if (lsevt.getValueIsAdjusting()) return;
ListSelectionModel lsm = (ListSelectionModel)lsevt.getSource();
if (lsm.isSelectionEmpty()) {}
else
//int selectedCol = lsm.getMinSelectionIndex();
//NewFrame = new CCYFrame("more blabla!");
}//end of method enableCellSelection
...a lot of code follows...
TIA :-)Hi, thanks for the tip, but I get following compile-time error:
<identifier> expected
newtable.addMouseListener(new MouseAdapter()
.............................................^
package newtable does not exist
newtable.addMouseListener(new MouseAdapter()
...............^
2 errors
And here is how I've modified the code :
public class CCYTable extends JPanel
JTable newtable;
...lots of variables...
private boolean ALLOW_COLUMN_SELECTION = true;
private boolean ALLOW_ROW_SELECTION = true;
private boolean clickForDetail = true; // click on cell to launch frame with detail
protected String[] colHeaderInfo =
{"Name of Instrument, move mouse to instrument for general detail of service.",
...lots of text for tooltipbox...
// get values from database, use an "invisible column" for unique key
// description, conditions etc from Oracle...
...lots more String variables...
public void init()
//setSize(300,300);
tableHeader = new JLabel("Bids and Offers", JLabel.CENTER);
setLayout(new BorderLayout());
newtable = new JTable(new TableDefinition())
//Put cell info here, from Oracle CellInfo varchar2
public String getToolTipText (MouseEvent mevt)
String info = null;
java.awt.Point p = mevt.getPoint();
int rowIndex = rowAtPoint(p);
int colIndex = columnAtPoint(p);
int realColIndex = convertColumnIndexToModel(colIndex);
Object currentValue = getValueAt(rowIndex, colIndex);
if (realColIndex == 0)
{ if (currentValue.equals(LoC))
{ info = "Click to read general description of our \"" + LoC + "\" service." ;
return info;
} // end of JComponent's method getToolTipText
newtable.addMouseListener(new MouseAdapter() // HELP: compiler throws error here !!!!!!!!
public void mouseClicked(MouseEvent e)
java.awt.Point p = mevt.getPoint();
int rowIndex = rowAtPoint(p);
int colIndex = columnAtPoint(p);
int realColIndex = convertColumnIndexToModel(colIndex);
Object currentValue = getValueAt(rowIndex, colIndex);
if ((rowIndex == 0) and (colIndex == 0))
// do stuff for this particular JTable cell ...
//Put table header info
protected JTableHeader createDefaultTableHeader()
return new JTableHeader(columnModel)
public String getToolTipText(MouseEvent mevt)
String tip = null;
java.awt.Point p = mevt.getPoint();
int index = columnModel.getColumnIndexAtX(p.x);
int realIndex = columnModel.getColumn(index).getModelIndex();
return colHeaderInfo[realIndex];
ToolTipManager.sharedInstance().setDismissDelay(showInfoTimer);
newtable.setPreferredScrollableViewportSize(new Dimension(770, 350));
JScrollPane scrollpane = new JScrollPane(newtable);
initColumnSizes(newtable);
enableCellSelection(newtable);
add("North", tableHeader);
add("Center", scrollpane);
}On the other hand, this code works after a fashion but it is not what is needed because it listens to every JTable cell :
public class CCYTable extends JPanel
JTable newtable;
...unbelievably more variable definitions, etc...
public void init()
//setSize(300,300);
tableHeader = new JLabel("Bids and Offers", JLabel.CENTER);
setLayout(new BorderLayout());
newtable = new JTable(new TableDefinition())
//Put cell info here, from Oracle CellInfo varchar2
public String getToolTipText (MouseEvent mevt)
String info = null;
java.awt.Point p = mevt.getPoint();
int rowIndex = rowAtPoint(p);
int colIndex = columnAtPoint(p);
int realColIndex = convertColumnIndexToModel(colIndex);
Object currentValue = getValueAt(rowIndex, colIndex);
if (realColIndex == 0)
{ if (currentValue.equals(LoC))
{ info = "Click to read general description of our \"" + LoC + "\" service." ;
if (rowIndex == 0) // HELP: compiles okay but won't specifically select rowIndex == 0 and colIndex == 0
{this.addMouseListener(new clickListener(newtable, rowIndex, colIndex));
return info;
} // end of JComponent's method getToolTipText
... lots more code...
// ==============================
class clickListener extends MouseAdapter
private JTable newtable;
private int rowIndex;
private int colIndex;
public clickListener(JTable newtable, int rowIndex, int colIndex)
this.newtable = newtable;
this.rowIndex = rowIndex;
this.colIndex = colIndex;
public void mouseClicked(MouseEvent mevt)
NewFrame = new CCYFrame("blablabla");
}// end of method clickListenerIdeally I should be able to use a selection criteria like this :
java.awt.Point p = mevt.getPoint();
rowIndex = rowAtPoint(p);
colIndex=colAtPoint(p);
if ((rowIndex == 0) && (colIndex == 0)) {//do something}but this is going to be a bad Chrissy for me? -
Shading part of a JTable Cell dependent upon the value of the cell
Hi
Was hoping some one woudl be able to provide some help with this. I'm trying to create a renderer that will "shade" part of a JTable cell's background depending upon the value in the cell as a percentage (E.g. if the cell contains 0.25 then a quarter of the cell background will be shaded)
What I've got so far is a renderer which will draw a rectangle whose width is the relevant percentage of the cell's width. (i.e. the width of the column) based on something similar I found in the forum but the part I'm struggling with is getting it to draw this rectangle in any cell other than the first cell. I've tried using .getCellRect(...) to get the x and y position of the cell to draw the rectangle but I still can't make it work.
The code for my renderer as it stands is:
import java.awt.Component;
import java.awt.Graphics;
import java.awt.Graphics2D;
import javax.swing.JLabel;
import javax.swing.JTable;
import javax.swing.table.TableCellRenderer;
public class PercentageRepresentationRenderer extends JLabel implements TableCellRenderer{
double percentageValue;
double rectWidth;
double rectHeight;
JTable table;
int row;
int column;
int x;
int y;
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int column) {
if (value instanceof Number)
this.table = table;
this.row = row;
this.column = column;
Number numValue = (Number)value;
percentageValue = numValue.doubleValue();
rectHeight = table.getRowHeight(row);
rectWidth = percentageValue * table.getColumnModel().getColumn(column).getWidth();
return this;
public void paintComponent(Graphics g) {
x = table.getCellRect(row, column, false).x;
y = table.getCellRect(row, column, false).y;
setOpaque(false);
Graphics2D g2d = (Graphics2D)g;
g2d.fillRect(x,y, new Double(rectWidth).intValue(), new Double(rectHeight).intValue());
super.paintComponent(g);
}and the following code produces a runnable example:
import javax.swing.JFrame;
import javax.swing.JScrollPane;
import javax.swing.JTable;
import javax.swing.table.DefaultTableModel;
public class PercentageTestTable extends JFrame {
public PercentageTestTable()
Object[] columnNames = new Object[]{"A","B"};
Object[][] tableData = new Object[][]{{0.25,0.5},{0.75,1.0}};
DefaultTableModel testModel = new DefaultTableModel(tableData,columnNames);
JTable test = new JTable(testModel);
test.setDefaultRenderer(Object.class, new PercentageRepresentationRenderer());
JScrollPane scroll = new JScrollPane();
scroll.getViewport().add(test);
add(scroll);
public static void main(String[] args)
PercentageTestTable testTable = new PercentageTestTable();
testTable.pack();
testTable.setVisible(true);
testTable.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
}If anyone could help or point me in the right direction, I'd appreciate it.
RuanaeThis is an example I published some while ago -
import java.awt.*;
import javax.swing.*;
import javax.swing.table.*;
public class Fred120 extends JPanel
static final Object[][] tableData =
{1, new Double(10.0)},
{2, new Double(20.0)},
{3, new Double(50.0)},
{4, new Double(10.0)},
{5, new Double(95.0)},
{6, new Double(60.0)},
static final Object[] headers =
"One",
"Two",
public Fred120() throws Exception
super(new BorderLayout());
final DefaultTableModel model = new DefaultTableModel(tableData, headers);
final JTable table = new JTable(model);
table.getColumnModel().getColumn(1).setCellRenderer( new LocalCellRenderer(120.0));
add(table);
add(table.getTableHeader(), BorderLayout.NORTH);
public class LocalCellRenderer extends DefaultTableCellRenderer
private double v = 0.0;
private double maxV;
private final JPanel renderer = new JPanel(new GridLayout(1,0))
public void paintComponent(Graphics g)
super.paintComponent(g);
g.setColor(Color.CYAN);
int w = (int)(getWidth() * v / maxV + 0.5);
int h = getHeight();
g.fillRect(0, 0, w, h);
g.drawRect(0, 0, w, h);
private LocalCellRenderer(double maxV)
this.maxV = maxV;
renderer.add(this);
renderer.setOpaque(true);
renderer.setBackground(Color.YELLOW);
renderer.setBorder(null);
setOpaque(false);
setHorizontalAlignment(JLabel.CENTER);
public Component getTableCellRendererComponent(JTable table, Object value, boolean isSelected, boolean hasFocus, int row, int col)
final JLabel label = (JLabel) super.getTableCellRendererComponent(table, value, isSelected, hasFocus, row, col);
if (value instanceof Double)
v = ((Double)value).doubleValue();
return renderer;
public static void main(String[] args) throws Exception
final JFrame frame = new JFrame("Fred120");
frame.setDefaultCloseOperation(JFrame.EXIT_ON_CLOSE);
frame.setContentPane(new Fred120());
frame.pack();
frame.setLocationRelativeTo(null);
frame.setVisible(true);
} -
Drag and Drop of cell content between 2 tables
Hi Guys,
Iam into implementing drag and drop of cell contents between 2 different tables,say Table1 and Table2.(Iam not dragging and dropping rows or cells,Just copying the content of one cell to another).
Have extended the java tutorial class "TableTransferHandler" and "StringTransferHandler" under http://java.sun.com/docs/books/tutorial/uiswing/examples/dnd/index.html#ExtendedDndDemo to satisfy my needs.
The drag is enabled for Table1 and table2 as follows.
jTable1.setDragEnabled(true);
jTable1.setTransferHandler(new TableTransferHandler());
jTable2.setDragEnabled(true);
jTable2.setTransferHandler(new TableTransferHandler());
Dont be taken aback with the code I have put.It just to show what I have done..
My questions are put at the end of the post..
//String Transfer Handler class.
public abstract class StringTransferHandler extends TransferHandler {
protected abstract String exportString(JComponent c);
protected abstract void importString(JComponent c, String str);
protected abstract void cleanup(JComponent c, boolean remove);
protected Transferable createTransferable(JComponent c) {
return new StringSelection(exportString(c));
public int getSourceActions(JComponent c) {
return COPY_OR_MOVE;
public boolean importData(JComponent c, Transferable t) {
if (canImport(c, t.getTransferDataFlavors())) {
try {
String str = (String)t.getTransferData(DataFlavor.stringFlavor);
importString(c, str);
return true;
} catch (UnsupportedFlavorException ufe) {
} catch (IOException ioe) {
return false;
protected void exportDone(JComponent c, Transferable data, int action) {
cleanup(c, action == MOVE);
public boolean canImport(JComponent c, DataFlavor[] flavors) {
JTable table = (JTable)c;
int selColIndex = table.getSelectedColumn();
for (int i = 0; i < flavors.length; i++) {
if ((DataFlavor.stringFlavor.equals(flavors))&& (selColIndex !=0)) {
return true;
return false;
}//TableTransferHandler classpublic class TableTransferHandler extends StringTransferHandler {
private int[] rows = null;
private int addIndex = -1; //Location where items were added
private int addCount = 0; //Number of items added.
protected String exportString(JComponent c) {
JTable table = (JTable)c;
rows = table.getSelectedRows();
StringBuffer buff = new StringBuffer();
int selRowIndex = table.getSelectedRow();
int selColIndex = table.getSelectedColumn();
String val = table.getValueAt(selRowIndex,selColIndex).toString();
buff.append(val);
return buff.toString();
protected void importString(JComponent c, String str) {
JTable target = (JTable)c;
DefaultTableModel model = (DefaultTableModel)target.getModel();
//int index = target.getSelectedRow();
int row = target.getSelectedRow();
int column = target.getSelectedColumn();
target.setValueAt(str, row, column);
protected void cleanup(JComponent c, boolean remove) {
}Now I want to put in the following functionality into my program...
[1]prevent dragging and dropping text in to the same table.That means I dont want to drag a cell content from Table1 and drop to another cell in Table1. Want to drag and drop cell content only from Table1 to Table2.
[2]Change cursor on a un-defined Target. That means how to prevent a drag from a particular column in Table1.Also how to prevent a drop to a particular column in Table2. How to change the cursor to a "NO-DRAG" cursoror "NO-DROP" cursor.
Could it be done using Drag Source Listener and drop Target Listener?.
If yes,How can these listeners attached to the table and how to do it?
If No,How Could it be done?
[3]Want to change the background colour of the cell being dragged and also the background colour of the target cell where the drop is made...
[4]Is there any out of the box way to make an undo in the target cell(where drop was made) so that the old cell value is brought back.
How can I extend my code to take care of the above said things.
Any help or suggestions is greatly appreciated.....
Edited by: Kohinoor on Jan 17, 2008 10:58 AMHi Guys,
Iam into implementing drag and drop of cell contents between 2 different tables,say Table1 and Table2.(Iam not dragging and dropping rows or cells,Just copying the content of one cell to another).
Have extended the java tutorial class "TableTransferHandler" and "StringTransferHandler" under http://java.sun.com/docs/books/tutorial/uiswing/examples/dnd/index.html#ExtendedDndDemo to satisfy my needs.
The drag is enabled for Table1 and table2 as follows.
jTable1.setDragEnabled(true);
jTable1.setTransferHandler(new TableTransferHandler());
jTable2.setDragEnabled(true);
jTable2.setTransferHandler(new TableTransferHandler());
Dont be taken aback with the code I have put.It just to show what I have done..
My questions are put at the end of the post..
//String Transfer Handler class.
public abstract class StringTransferHandler extends TransferHandler {
protected abstract String exportString(JComponent c);
protected abstract void importString(JComponent c, String str);
protected abstract void cleanup(JComponent c, boolean remove);
protected Transferable createTransferable(JComponent c) {
return new StringSelection(exportString(c));
public int getSourceActions(JComponent c) {
return COPY_OR_MOVE;
public boolean importData(JComponent c, Transferable t) {
if (canImport(c, t.getTransferDataFlavors())) {
try {
String str = (String)t.getTransferData(DataFlavor.stringFlavor);
importString(c, str);
return true;
} catch (UnsupportedFlavorException ufe) {
} catch (IOException ioe) {
return false;
protected void exportDone(JComponent c, Transferable data, int action) {
cleanup(c, action == MOVE);
public boolean canImport(JComponent c, DataFlavor[] flavors) {
JTable table = (JTable)c;
int selColIndex = table.getSelectedColumn();
for (int i = 0; i < flavors.length; i++) {
if ((DataFlavor.stringFlavor.equals(flavors))&& (selColIndex !=0)) {
return true;
return false;
}//TableTransferHandler classpublic class TableTransferHandler extends StringTransferHandler {
private int[] rows = null;
private int addIndex = -1; //Location where items were added
private int addCount = 0; //Number of items added.
protected String exportString(JComponent c) {
JTable table = (JTable)c;
rows = table.getSelectedRows();
StringBuffer buff = new StringBuffer();
int selRowIndex = table.getSelectedRow();
int selColIndex = table.getSelectedColumn();
String val = table.getValueAt(selRowIndex,selColIndex).toString();
buff.append(val);
return buff.toString();
protected void importString(JComponent c, String str) {
JTable target = (JTable)c;
DefaultTableModel model = (DefaultTableModel)target.getModel();
//int index = target.getSelectedRow();
int row = target.getSelectedRow();
int column = target.getSelectedColumn();
target.setValueAt(str, row, column);
protected void cleanup(JComponent c, boolean remove) {
}Now I want to put in the following functionality into my program...
[1]prevent dragging and dropping text in to the same table.That means I dont want to drag a cell content from Table1 and drop to another cell in Table1. Want to drag and drop cell content only from Table1 to Table2.
[2]Change cursor on a un-defined Target. That means how to prevent a drag from a particular column in Table1.Also how to prevent a drop to a particular column in Table2. How to change the cursor to a "NO-DRAG" cursoror "NO-DROP" cursor.
Could it be done using Drag Source Listener and drop Target Listener?.
If yes,How can these listeners attached to the table and how to do it?
If No,How Could it be done?
[3]Want to change the background colour of the cell being dragged and also the background colour of the target cell where the drop is made...
[4]Is there any out of the box way to make an undo in the target cell(where drop was made) so that the old cell value is brought back.
How can I extend my code to take care of the above said things.
Any help or suggestions is greatly appreciated.....
Edited by: Kohinoor on Jan 17, 2008 10:58 AM -
How to write an element in a JTable Cell
Probably it's a stupid question but I have this problem:
I have a the necessity to build a JTable in which, when I edit a cell and I push a keyboard button, a new Frame opens to edit the content of the cell.
But the problem is how to write something in the JTable cell, before setting its model. Because, I know, setCellAT() method of JTree inserts the value in the model and not in the table view. And repainting doesn't function!
What to do??
ThanksHi there
Depending on your table model you should normally change the "cell value" of the tablemodel.
This could look like:
JTable table = new JTable();
TableModel model = table.getModel();
int rowIndex = 0, columnIndex = 0;
model.setValueAt("This is a test", rowIndex, columnIndex);
The tablemodel should then fire an event to the view (i.e. JTable) and the table should be updated.
Hope this helps you -
Hi
I am facing one problem. there is some data should be displayed in Jtable cell.
The thing is that the whole data shall be visible in the cell.. for this I am writing one renderer.. but I could not find the desire solution.. please check it out
class Item_Details extends JFrame {
ApsJTable itemTable = null;
ApsJTable imageTable = null;
ArrayList data = new ArrayList();
String[] columns = new String[2];
ArrayList data1 = new ArrayList();
String[] columns1 = new String[2];
ItemTableModel itemTableModel = null;
ItemTableModel itemTableModel1 = null;
public Item_Details()
super("Item Details");
this.setSize(600,100);
this.setVisible(true);
init();
private void init(){
////////////// Get data for first Table Model ////////////////////////////
data = getRowData();
columns = getColData();
System.out.println(columns[0]);
itemTableModel = new ItemTableModel(data,columns);
/////////////Get Data for Second Table Model //////////////////////////////
try{
data1 = getRowData1();
}catch(Exception e){}
columns1 = getColumns1();
itemTableModel1 = new ItemTableModel(data1,columns1);
///////////// Set Data In Both Table Model //////////////////////////////////
itemTable = new ApsJTable(itemTableModel);
imageTable = new ApsJTable(itemTableModel1);
this.itemTable.setShowGrid(false);
this.imageTable.setShowGrid(false);
this.itemTable.setColumnSelectionAllowed(false);
this.imageTable.setColumnSelectionAllowed(false);
System.out.println(itemTable.getColumnCount());
this.imageTable.setRowHeight(getImageHeight()+3);
JScrollPane tableScrollPane = new JScrollPane(this.imageTable,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
tableScrollPane.setRowHeaderView(this.itemTable);
tableScrollPane.getRowHeader().setPreferredSize(new Dimension(800, 0));
itemTable.getTableHeader().setReorderingAllowed(false);
itemTable.setColumnSelectionAllowed(false);
//itemTable.setRowHeight(25);
itemTable.setCellSelectionEnabled(false);
itemTable.setFocusable(false);
imageTable.getTableHeader().setReorderingAllowed(false);
imageTable.setFocusable(false);
imageTable.setCellSelectionEnabled(false);
//tableScrollPane.setOpaque(false);
itemTable.setAutoCreateColumnsFromModel(false);
int columnCount = itemTable.getColumnCount();
for(int k=0;k<columnCount;k++)
/* TableCellRenderer renderer = null;
TableCellEditor editor = null;
renderer = new TextAreaCellRenderer(); // NEW
editor = new TextAreaCellEditor();
TableColumn column = new TableColumn(k,itemTable.getColumnModel().getColumn(k).getWidth(),renderer, editor);
itemTable.addColumn(column);*/
itemTable.getColumnModel().getColumn(k).setCellRenderer(new MultiLineCellRenderer());
//itemTable.getColumnModel().getColumn(k).setCellEditor(new TextAreaCellEditor());
////////////---------------------- Here background color is being set--------------//////////////////
this.imageTable.getParent().setBackground(Color.WHITE);
this.itemTable.getParent().setBackground(Color.WHITE);
tableScrollPane.setCorner(ScrollPaneConstants.UPPER_LEFT_CORNER,this.itemTable.getTableHeader());
getContentPane().add(tableScrollPane,BorderLayout.CENTER);
getContentPane().setVisible(true);
public static void main(String[] str){
com.incors.plaf.alloy.AlloyLookAndFeel.setProperty("alloy.licenseCode", "2005/05/28#[email protected]#1v2pej6#1986ew");
try {
javax.swing.LookAndFeel alloyLnF = new com.incors.plaf.alloy.AlloyLookAndFeel();
javax.swing.UIManager.setLookAndFeel(alloyLnF);
} catch (javax.swing.UnsupportedLookAndFeelException ex) {
ex.printStackTrace();
Item_Details ID = new Item_Details();
ID.setVisible(true);
public ArrayList getRowData()
ArrayList rowData=new ArrayList();
Hashtable item = new Hashtable();
item.put(new Long(0),new String("Item No:"));
item.put(new Long(1),new String("RED-1050"));
rowData.add(0,item);
item = new Hashtable();
item.put(new Long(0),new String("Description:"));
item.put(new Long(1),new String("SYSTEM 18 mbh COOLING 13 mbh HEATING 230/208 v POWER AIRE "));
rowData.add(1,item);
item = new Hashtable();
item.put(new Long(0),new String("Stage:"));
item.put(new Long(1),new String("Draft"));
rowData.add(2,item);
item = new Hashtable();
item.put(new Long(0),new String("Price: "));
item.put(new Long(1),new String(" 999.00"));
rowData.add(3,item);
item = new Hashtable();
item.put(new Long(0),new String("Features:"));
item.put(new Long(1),new String("SYSTEM COOLING & HEATING 12 mbh 230/208 v POWER AIRE SYSTEM1234 COOLING & HEATING 12 mbh 230/208 v POWER AIRE "));
rowData.add(4,item);
/*item.put(new Long(0),new String("Family Sequence"));
item.put(new Long(1),new String("8.00"));
rowData.add(5,item);
item.put(new Long(0),new String("Family Sequence"));
item.put(new Long(1),new String("8.00"));
rowData.add(6,item);
item.put(new Long(0),new String("Family Sequence"));
item.put(new Long(1),new String("8.00"));
rowData.add(7,item);
return rowData;
public String[] getColData()
String[] colData = new String[]{"Attribute","Value"};
return colData;
public ArrayList getRowData1()throws MalformedURLException{
ArrayList rowData = new ArrayList();
Hashtable item = new Hashtable();
String str = new String("http://biis:8080/assets/PRIMPRIM/Adj_BeacM_Small.jpg");
URL url = new URL(str);
ImageIcon ic = new ImageIcon(url);
ImageIcon scaledImage = new ImageIcon(ic.getImage().getScaledInstance(getImageHeight(), -1,Image.SCALE_SMOOTH));
item.put(new Long(0), scaledImage);
rowData.add(0,item);
String str1 = new String("http://biis:8080/assets/PRIMPRIM/Adj_BeacM_Small.jpg");
URL url1 = new URL(str1);
ImageIcon ic1 = new ImageIcon(url1);
ImageIcon scaledImage1 = new ImageIcon(ic1.getImage().getScaledInstance(120, -1,Image.SCALE_DEFAULT));
item.put(new Long(0),scaledImage1);
rowData.add(1,item);
return rowData;
public String[] getColumns1(){
String[] colData = new String[]{"Image"};
return colData;
public int getImageHeight(){
ImageIcon ic = new ImageIcon("c:\\image\\ImageNotFound.gif");
return ic.getIconHeight();
class MultiLineCellRenderer extends JTextArea implements TableCellRenderer {
public MultiLineCellRenderer() {
setLineWrap(true);
setWrapStyleWord(true);
JScrollPane m_scroll = new JScrollPane(this,
JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,
JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
setOpaque(true);
public Component getTableCellRendererComponent(JTable table, Object value,
boolean isSelected, boolean hasFocus, int row, int column) {
/*if (isSelected) {
setForeground(table.getSelectionForeground());
setBackground(table.getSelectionBackground());
} else {
setForeground(table.getForeground());
setBackground(table.getBackground());
// setFont(table.getFont());
/* if (hasFocus) {
setBorder( UIManager.getBorder("Table.focusCellHighlightBorder") );
if (table.isCellEditable(row, column)) {
setForeground( UIManager.getColor("Table.focusCellForeground") );
setBackground( UIManager.getColor("Table.focusCellBackground") );
} else {
setBorder(new EmptyBorder(1, 2, 1, 2));
int width = table.getColumnModel().getColumn(column).getWidth();
//setSize(width, 1000);
int rowHeight = getPreferredSize().height;
if (table.getRowHeight(row) != rowHeight)
table.setRowHeight(row, rowHeight);
setText((value == null) ? "" : value.toString());
return this;
}what wrong with this code..
ThanksIn summary, you have one or more columns for which the data must be wholly visible - correct? If you need all the columns to show the whole of their data, you are goinf to have to expand the table, otherwise you can expand a column with something like
myTable.getColumnModel().getColumn(whichever).setPreferredWidth(whatever); -
Problem in JTable cell renderer
Hi
One problem in JTable cell. Actually I am using two tables while I am writing renderer for word raping in first table .. but it is affected in last column only remain is not being effected�. Please chaek it out what is exact I am missing�
Thanks
package com.apsiva.tryrowmerge;
import java.awt.*;
import java.awt.event.*;
import java.util.ArrayList;
import java.util.EventObject;
import java.util.Hashtable;
import java.net.*;
import javax.swing.*;
import javax.swing.border.Border;
import javax.swing.border.EmptyBorder;
import javax.swing.event.*;
import javax.swing.table.TableCellEditor;
import javax.swing.table.TableCellRenderer;
import javax.swing.table.TableColumn;
class Item_Details extends JFrame {
ApsJTable itemTable = null;
ApsJTable imageTable = null;
ArrayList data = new ArrayList();
String[] columns = new String[2];
ArrayList data1 = new ArrayList();
String[] columns1 = new String[2];
ItemTableModel itemTableModel = null;
ItemTableModel itemTableModel1 = null;
public Item_Details()
super("Item Details");
this.setSize(600,100);
this.setBackground(Color.WHITE);
this.setVisible(true);
init();
private void init(){
////////////// Get data for first Table Model ////////////////////////////
data = getRowData();
columns = getColData();
System.out.println(columns[0]);
itemTableModel = new ItemTableModel(data,columns);
/////////////Get Data for Second Table Model //////////////////////////////
try{
data1 = getRowData1();
}catch(Exception e){}
columns1 = getColumns1();
itemTableModel1 = new ItemTableModel(data1,columns1);
///////////// Set Data In Both Table Model //////////////////////////////////
itemTable = new ApsJTable(itemTableModel);
imageTable = new ApsJTable(itemTableModel1);
this.itemTable.setShowGrid(false);
this.imageTable.setShowGrid(false);
this.itemTable.setColumnSelectionAllowed(false);
this.imageTable.setColumnSelectionAllowed(false);
System.out.println(itemTable.getColumnCount());
this.imageTable.setRowHeight(getImageHeight()+3);
JScrollPane tableScrollPane = new JScrollPane(this.imageTable,JScrollPane.VERTICAL_SCROLLBAR_AS_NEEDED,JScrollPane.HORIZONTAL_SCROLLBAR_AS_NEEDED);
tableScrollPane.setRowHeaderView(this.itemTable);
//itemTable.getColumnModel().getColumn(0).setMaxWidth(200);
itemTable.getColumnModel().getColumn(0).setPreferredWidth(200);
itemTable.getColumnModel().getColumn(1).setPreferredWidth(600);
tableScrollPane.getRowHeader().setPreferredSize(new Dimension(800, 0));
itemTable.getTableHeader().setResizingAllowed(false);
itemTable.getTableHeader().setReorderingAllowed(false);
itemTable.setColumnSelectionAllowed(false);
//itemTable.setRowHeight(25);
itemTable.setCellSelectionEnabled(false);
itemTable.setFocusable(false);
imageTable.getTableHeader().setReorderingAllowed(false);
imageTable.setFocusable(false);
imageTable.setCellSelectionEnabled(false);
//tableScrollPane.setOpaque(false);
itemTable.setAutoCreateColumnsFromModel(false);
int columnCount = itemTable.getColumnCount();
for(int k=0;k<columnCount;k++)
TableCellRenderer renderer = null;
TableCellEditor editor = null;
renderer = new TextAreaCellRenderer(); // NEW
// editor = new TextAreaCellEditor();
// TableColumn column = new TableColumn(k,itemTable.getColumnModel().getColumn(k).getWidth(),renderer, editor);
System.out.println(k);
itemTable.getColumnModel().getColumn(k).setCellRenderer(renderer);
//itemTable.getColumnModel().getColumn(k).setCellEditor(editor);
/*itemTable.getColumnModel().getColumn(1).setCellRenderer(new TextAreaCellRenderer());
itemTable.getColumnModel().getColumn(1).setCellEditor(new TextAreaCellEditor());*/
// itemTable.setShowGrid(false);
//itemTable.addColumn(column);
//itemTable.getColumnModel().getColumn(k).setCellRenderer(new MultiLineCellRenderer());
//itemTable.getColumnModel().getColumn(k).setCellEditor(new TextAreaCellEditor());
////////////---------------------- Here background color is being set--------------//////////////////
this.imageTable.getParent().setBackground(Color.WHITE);
this.itemTable.getParent().setBackground(Color.WHITE);
tableScrollPane.setCorner(ScrollPaneConstants.UPPER_LEFT_CORNER,this.itemTable.getTableHeader());
getContentPane().add(tableScrollPane,BorderLayout.CENTER);
getContentPane().setVisible(true);
public static void main(String[] str){
com.incors.plaf.alloy.AlloyLookAndFeel.setProperty("alloy.licenseCode", "2005/05/28#[email protected]#1v2pej6#1986ew");
try {
javax.swing.LookAndFeel alloyLnF = new com.incors.plaf.alloy.AlloyLookAndFeel();
javax.swing.UIManager.setLookAndFeel(alloyLnF);
} catch (javax.swing.UnsupportedLookAndFeelException ex) {
ex.printStackTrace();
Item_Details ID = new Item_Details();
ID.setVisible(true);
public ArrayList getRowData()
ArrayList rowData=new ArrayList();
Hashtable item = new Hashtable();
item.put(new Long(0),new String("Item No:aaaaaaa aaaaaaaa aaaaaaaaa aaaaaa"));
item.put(new Long(1),new String("RED-1050"));
rowData.add(0,item);
item = new Hashtable();
item.put(new Long(0),new String("Description:rt r trtrt rttrytrr tytry trytry tr tr rty thyjyhjhnhnhgg hhjhgjh"));
item.put(new Long(1),new String("SYSTEM 18 mbh COOLING 13 mbh HEATING 230/208 v POWER AIRE "));
rowData.add(1,item);
item = new Hashtable();
item.put(new Long(0),new String("Stage:"));
item.put(new Long(1),new String("Draft"));
rowData.add(2,item);
item = new Hashtable();
item.put(new Long(0),new String("Price: "));
item.put(new Long(1),new String("999.00"));
rowData.add(3,item);
item = new Hashtable();
item.put(new Long(0),new String("Features:"));
item.put(new Long(1),new String("SYSTEM COOLING & HEATING 12 mbh 230/208 v POWER AIRE SYSTEM1234 COOLING & HEATING 12 mbh 230/208 v POWER AIRE "));
rowData.add(4,item);
item = new Hashtable();
item.put(new Long(0),new String("Features:"));
item.put(new Long(1),new String("SYSTEM COOLING & HEATING 12 mbh 230/208 v POWER AIRE SYSTEM1234 COOLING & HEATING 12 mbh 230/208 v POWER AIRE "));
rowData.add(5,item);
item = new Hashtable();
item.put(new Long(0),new String("Features:"));
item.put(new Long(1),new String("SYSTEM COOLING & HEATING 12 mbh 230/208 v POWER AIRE SYSTEM1234 COOLING & HEATING 12 mbh 230/208 v POWER AIRE "));
rowData.add(6,item);
/*item.put(new Long(0),new String("Family Sequence"));
item.put(new Long(1),new String("8.00"));
rowData.add(5,item);
item.put(new Long(0),new String("Family Sequence"));
item.put(new Long(1),new String("8.00"));
rowData.add(6,item);
item.put(new Long(0),new String("Family Sequence"));
item.put(new Long(1),new String("8.00"));
rowData.add(7,item);
return rowData;
public String[] getColData()
String[] colData = new String[]{"Attribute","Value"};
return colData;
public ArrayList getRowData1()throws MalformedURLException{
ArrayList rowData = new ArrayList();
Hashtable item = new Hashtable();
String str = new String("http://biis:8080/assets/PRIMPRIM/Adj_BeacM_Small.jpg");
URL url = new URL(str);
ImageIcon ic = new ImageIcon(url);
ImageIcon scaledImage = new ImageIcon(ic.getImage().getScaledInstance(getImageHeight(), -1,Image.SCALE_SMOOTH));
item.put(new Long(0), scaledImage);
rowData.add(0,item);
String str1 = new String("http://biis:8080/assets/PRIMPRIM/Adj_BeacM_Small.jpg");
URL url1 = new URL(str1);
ImageIcon ic1 = new ImageIcon(url1);
ImageIcon scaledImage1 = new ImageIcon(ic1.getImage().getScaledInstance(120, -1,Image.SCALE_DEFAULT));
item.put(new Long(0),scaledImage1);
rowData.add(1,item);
return rowData;
public String[] getColumns1(){
String[] colData = new String[]{"Image"};
return colData;
public int getImageHeight(){
ImageIcon ic = new ImageIcon("c:\\image\\ImageNotFound.gif");
return ic.getIconHeight();
class TextAreaCellRenderer extends JTextArea implements TableCellRenderer
public TextAreaCellRenderer() {
setEditable(false);
setLineWrap(true);
setWrapStyleWord(true);
public Component getTableCellRendererComponent(JTable table,
Object value, boolean isSelected, boolean hasFocus,
int nRow, int nCol)
if (value instanceof String)
setText((String)value);
// Adjust row's height
int width = table.getColumnModel().getColumn(nCol).getWidth();
setSize(width, 1000);
int rowHeight = getPreferredSize().height;
if (table.getRowHeight(nRow) != rowHeight)
table.setRowHeight(nRow, rowHeight);
this.setBackground(Color.WHITE);
return this;I think Problem is between these code only
for(int k=0;k<columnCount;k++)
TableCellRenderer renderer = null;
TableCellEditor editor = null;
renderer = new TextAreaCellRenderer();
itemTable.getColumnModel().getColumn(k).setCellRenderer(renderer);or in this renderer
class TextAreaCellRenderer extends JTextArea implements TableCellRenderer
public TextAreaCellRenderer() {
setEditable(false);
setLineWrap(true);
setWrapStyleWord(true);
public Component getTableCellRendererComponent(JTable table,
Object value, boolean isSelected, boolean hasFocus,
int nRow, int nCol)
if (value instanceof String)
setText((String)value);
// Adjust row's height
int width = table.getColumnModel().getColumn(nCol).getWidth();
setSize(width, 1000);
int rowHeight = getPreferredSize().height;
if (table.getRowHeight(nRow) != rowHeight)
table.setRowHeight(nRow, rowHeight);
this.setBackground(Color.WHITE);
return this;
} -
Way to listen for change in JTable cell?
I am having troubles trying to catch a key event while the user is entering text inside a given JTable cell (x/y location). The JTable only seems to manage String objects in it's cells so I can't place a JTextField in there with a KeyListener on it.
Currently, I can only get control of the application once the user has left the cell they are editing.
Does anyone have an example of a JTable 'cell KeyListener' scenario? At this point I want to see if I can print 'hello world' each time I type a character within a cell. Then I'll go from there....If you want to know when the contents of a cell have been updated you should use a TableModelListener.
If you want to know when a character is added/removed from the cell editor then you need to first understand how this works with a simple text field.
Typically you would use a DocumentListener to receive notifies of a change to the text field. However, within the DocumentEvent you wouldn't be able to change the text field as this notification comes after the text field has already been updated.
If you need to ability to intercept changes to the text field before they happen, then you would need to use a DocumentFilter. An example of using a DocumentFilter is given in the Swing tutorial on [url http://java.sun.com/docs/books/tutorial/uiswing/components/generaltext.html#filter]Text Component Features.
Once you get your regular text field working the way you want, the next step to create a DefaultCellEditor using this JTextField and use this editor in your JTable. The above tutorial also has a section on using editors in a table. -
MouseListener for JTable cells using html
Hello,
I'm trying to write a MouseListener that determines whether the cursor is positioned over a certain string within a JTable cell. The cell contains an html string to allow for some formatting.
For instance, the table data for a certain cell could be "<html><b>SomeBoldText</b>moreText<html>". I would like to detect when a mouse click occurs on the bold text.
My current solution is to create the glyph vector corresponding to the cell content stripped of all html tags and then check if the cursor position is within one of the glyphs that form the string. However, that obviously doesn't take into account the formatting done by html, so its not working very well.
Any suggestions?the only way you could possibly do this, if you used JEditorPane as a renderer. even then i'm not sure.
-
Is there any known efficient methods of creating the JTextField or JTable-cell Button as like in Forte's Component Inspector window where you click on the property value field and the value is displayed just left of a small button labelled "..." ie: [some text field with value][...] also referred to as the "ellipsis" buttons, or will most answers to this question simply describe the layout of a JField-JButton combination? The action from clicking on the [...] button aligned right of the JTextField simply invokes or displays a larger input interface in which upon completion of the entered data, returns the input to the related JTextField.
Thanks to anybody for any help with this, and perhaps in return, I may be able to answer any non-gui java questions, or some not so unfamilliar GUI questions.Hello StanislavL and Lutianxiong,
I remember asking this question some time ago, and the time has come again for me to seek this functionality. I have finally achieved the functionality and thought I would post the answer for anybody else. I had not realized that I had recieved a solution/reply to my original question as I come here to post the answer, and in fact, my solution does appear to be very similiar to your reply, StanislavL. As for you, Lutianxiong and other seekers of this info, here is my solution with a JFileChooser style input for the 3rd column which only shows gif,jpg and png files:
<code>
------------- TableCellFileInput.java -------------------
public class TableCellFileInput extends javax.swing.JPanel {
private String extensions[];
public TableCellFileInput(String fileExtensions[]) {
extensions = fileExtensions;
self = this;
initComponents();
private void initComponents() {
valueField = new javax.swing.JTextField();
fileButton = new javax.swing.JButton();
setLayout(new java.awt.BorderLayout());
valueField.setText("jTextField1");
add(valueField, java.awt.BorderLayout.CENTER);
fileButton.setText("...");
fileButton.setMargin(new java.awt.Insets(0, 2, 0, 2));
fileButton.addActionListener(new java.awt.event.ActionListener() {
public void actionPerformed(java.awt.event.ActionEvent evt) {
fileButtonActionPerformed(evt);
add(fileButton, java.awt.BorderLayout.EAST);
private void fileButtonActionPerformed(java.awt.event.ActionEvent evt) {
String filePath = valueField.getText();
if(filePath != null && filePath.length() > 0) {
filePath = new java.io.File(filePath).getParent();
javax.swing.JFileChooser chooser
= new javax.swing.JFileChooser(filePath);
chooser.setFileFilter(new ImageFilter());
int returnVal = chooser.showOpenDialog(this);
if(returnVal == javax.swing.JFileChooser.APPROVE_OPTION) {
valueField.setText(chooser.getSelectedFile().getAbsolutePath());
class ImageFilter extends javax.swing.filechooser.FileFilter {
public boolean accept(java.io.File f) {
if(f.isDirectory()) return true;
String fName = f.getName();
if(extensions != null) {
for(int i=0;i<extensions.length;i++) {
if(fName.endsWith(extensions[ i ])) return true;
return false;
public String getDescription() {
return DESCRIPTION;
class CustomCellEditor extends javax.swing.AbstractCellEditor
implements javax.swing.table.TableCellEditor {
public Object getCellEditorValue() {
return valueField.getText();
public java.awt.Component getTableCellEditorComponent(javax.swing.JTable table, Object value, boolean isSelected, int row, int column) {
System.out.println("fileEditor");
if(value == null) valueField.setText("");
else valueField.setText(value.toString());
return self;
public void setColumn(javax.swing.table.TableColumn column) {
column.setCellEditor(new CustomCellEditor());
private javax.swing.JButton fileButton;
private javax.swing.JTextField valueField;
private static final String DESCRIPTION = "Image File Filter";
private java.awt.Component self;
------------- TestTable .java -------------------
public class TestTable extends javax.swing.JFrame {
public TestTable() {
editorField = new javax.swing.JTextField();
String fileExts[] = {"gif","jpg","png"};
fileEditorField = new TableCellFileInput(fileExts);
initComponents();
javax.swing.table.TableColumn column
= jTable1.getColumn("Title 3");
fileEditorField.setColumn(column);
private void initComponents() {
jScrollPane1 = new javax.swing.JScrollPane();
jTable1 = new javax.swing.JTable();
addWindowListener(new java.awt.event.WindowAdapter() {
public void windowClosing(java.awt.event.WindowEvent evt) {
exitForm(evt);
jTable1.setModel(new javax.swing.table.DefaultTableModel(
new Object [][] {
{null, null, null, "cats"},
{null, null, null, "dogs"},
{null, null, null, "mice"},
{null, null, null, "birds"}
new String [] {
"Title 1", "Title 2", "Title 3", "Title 4"
Class[] types = new Class [] {
java.lang.Object.class, java.lang.Object.class, java.lang.Object.class, java.lang.String.class
public Class getColumnClass(int columnIndex) {
return types [columnIndex];
jScrollPane1.setViewportView(jTable1);
getContentPane().add(jScrollPane1, java.awt.BorderLayout.CENTER);
java.awt.Dimension screenSize = java.awt.Toolkit.getDefaultToolkit().getScreenSize();
setBounds((screenSize.width-400)/2, (screenSize.height-300)/2, 400, 300);
private void exitForm(java.awt.event.WindowEvent evt) {
System.exit(0);
public static void main(String args[]) {
new TestTable().show();
private javax.swing.JScrollPane jScrollPane1;
private javax.swing.JTable jTable1;
private javax.swing.JTextField editorField;
private TableCellFileInput fileEditorField;
</code>
Maybe you are looking for
-
SPOOL_INTERNAL_ERROR spool overflow when submitting the same program
I am submitting the same program via job with different seletion screen values after JOB_OPEN, and then SUBMIT statement and JOB_CLOSE FM. But this job get cancelled with message "ABAP/4 processor: SPOOL_INTERNAL_ERROR" . The submit is as follows: SU
-
How to check whether follow on document is created for sc or po,is there any table or fm available?
How to check whether follow on document is created for sc or po,is there any table or fm available?
-
[Solved] where is the .ratpoisonrc file in my home directory?
I installed ratpoison and started it up successfully. but I have no ~/.ratpoisonrc file in my home directory. Where is that? I also have no /etc/ratpoison dir or file... Last edited by mshan (2014-01-07 11:01:21)
-
Opening for Lead Web Programmer in IT Security and allied services at Mumbai
Currently we are looking for Lead Web Programmer with US based leading organization engaged in IT Security and allied services at Mumbai.. Here are the job profile as well the company profile. Job Profile :: We are looking for an experienced high-lev
-
How to run Servlets in Eclipse
Am trying to run a servlet in elipse...but when i do so, the file which is am runnig is getting downloaded in my browser.... What should i do.....