Jtree: Can I add JButtons (that actualy work) to leafnodes?

Basically, I have added a couple of JButtons to each node of the tree by creating a DefaultTreeCellRenderer. The buttons are rendered fine, but do not respond at all to mouse clicks. I think this is because the JTree only allows node content to be changed when it is in edit mode (for example, changing the DefaultTreeCellEditor would allow you to implement a JButton).
Please could you tell me if it is possible to implement JButtons into a JTree and achieve the result I want � or is this not possible.
Thanks for your help.

Have you tried adding a tree selection listener to the tree? This will allow you to respond to tree node selections. If that doesn't work your suggestion of using a DefaultTreeCellEditor may work.

Similar Messages

  • I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    I have started a photo book in iPhoto (OS 10.7.5). How can I add photos that were not in the original album?

    Thanks for your quick response. I thought I had tried that but I must not have because it worked perfectly.

  • Can I add my own art work to my albums in iTunes and/or share them with the Apple Store for downloading?

    Can I add my own art work to my albums in iTunes and/or share them with the Apple Store for others to download?

    Thanks Brij011
    I thought that there was a way to do this. However, it would be neat to be able to upload correct Art Work for album covers so that other could share instead of having to scan / take picture and then import. I guess Apple would be inodated with incorrect pictures if we could upload to them.
    Oh well... thanks again !

  • HT1338 Where can I download iTunes that will work with OS 10.4.11?

    Where can I download iTunes that will work with OS 10.4.11?

    Hello, I believe this is the latest version you can use in 10.4.11
    http://support.apple.com/kb/DL1056

  • Can we add additional fields in work center creation using any user exit ?

    Hi,
    is there any user exit using which we can have some tab and fields such that we can add/ update the equipment to wotk center in CR01 ?
    regards,
    madhu kiran

    hi,
    requirement is can i get the additional fields like equipment and asset in the work center creation ?
    i would like to maintain these against a work center
    and  using any user exit can i add additional fields ?
    regards,
    madhu kiran

  • Can you add fields that are manually maintained.

    I'd like to be able to add fields to my MAP Toolkit's inventory. For example, adding Asset and Warranty fields, to keep track of this information. I'd be maintaining the data manually, which is fine since it doesn't change very often. Is there a way to extend
    the toolkit to include these types of fields?
    So far the only solution I've been able to think of is to generate reports, convert the .XLS to .CSV, and then use PowerShell to merge the .CSV with a file containing the static information. This would be quite an undertaking as I'd need either different
    scripts, of different logic paths, to deal with the multiple reports available from the toolkit.
    Thanks
    Jim Winner

    The reports are generated using queries that are in stored procedures. I suppose it would be possible to modify the query so that extra columns would be created, but I don't know how you would get the data into MAP.
    Please remember to click "Mark as Answer" on the post that helps you, and to click
    "Unmark as Answer" if a marked post does not actually answer your question. Please
    VOTE as HELPFUL if the post helps you. This can be beneficial to other community members reading the thread.

  • How can  i add photos that were emailed to me to my photo album.

    I some pictures in my email i want to add them to my photo library in my iphone is that possible.

    imioum,
    You will need to copy the pictures to your computer and then you can sync them to the iPhone through the Photos tab in iTunes.
    For more information on syncing pictures and other content to your iPhone to your computer, please take a look at this article:
    http://docs.info.apple.com/article.html?artnum=305741
    Hope this helps,
    Jennifer B.

  • How can I add buttons that do different things to each row of an rpt result

    Hi there,
    I'm trying to figure out how to add buttons to each row of a report. Here is the scenario:
    report query returns a set of data that needs to be "approved". The options are "Append", "Replace", or "Reject" (I want to make the results look like so:)
    Person1 today blah, blah blah... Append button Replace button Reject button
    Person2 today blah, blah, blah... Append button Replace button Reject button
    PersonA today something, blah... Append button Replace button Reject button
    and so on.
    I'd like to set up the page so that there is an append, replace, reject button for each row returned by the report. So when the "Approver" clicks on the append button, something happens for that row, etc. How does one do this? So far I can only get the buttons to show up in the region. I also thought it might be possible to somehow turn the append, replace, reject text into links that called a plsql proceedure that would handle the action, but I'm not having any success with that idea either.
    Edited by: user10361829 on Sep 29, 2009 12:10 PM

    What I've done is make my report query as follows:
    select field_a, field_b, field_c, 'Append', 'Replace', 'Reject'
    from table_x
    where field y = :PX_ID
    That gives me the words (append, replace, reject) in the report. Then I go to the report attributes section and make a link out of the columns (append, replace, reject) so far, so good.
    Next question is how to make clicking on those links activate an update action on tableN. In the column_link section there is a box marked "Request" that looks like it might be relevant because Request is a term connected to buttons, but I've no idea how to use it. Or, can one use the tabluar form element section of the report attributes page to connect the Append (pseudo column) to an action? I've looked at your example (Sam) with the delete button, but what I really need to see is the Apex menu that sets it up because there are so many levels in the interface it is not intuitive (at least for me). I know exactly what I want it to look like but I'm missing the crucial step to get there... Thanks for your help so far.
    Column link section is described below :
    Column Link     Top
    Link Text      flashlight          
         [*Append*][Icon 1][Icon 2][Icon 3][Icon 4][Icon 5]
    Link Attributes      
    Target: *"Page in this application"*     Page: *10*     
    Reset Pagination
    Request Clear Cache      
    Name     Value
    Item 1      Px_page_item flashlight *#????#*          flashlight
    Item 2      flashlight          flashlight
    Item 3      flashlight          flashlight
    URL      
    Page Checksum

  • What GPU can I upgrade to that will work with my computer?

    Hello, I am lookign to upgrade my GPU in my HP H8-1234. About a year and half ago I upgraded my Radeon hd 7450 to a XFX radeon hd 7750. The card worked well, just for what I am doing with it (Gaming) it doesn't work as well as I would like. So I recently ordered a Gigabyte gtx 660, at the time I did not know about the bios locks that HP puts on their computers. So now I have the GPU sitting on my desk, useless. Luckily I can return it with no restock fee. The problem with it is that it boots, and then just sits on this screen that say press ESC to enter setup, or something like that. By the way my motherboard is a m3970am-hp. So I guess I have 2 questions.
    1) Is there anything I can do to use the 660?
    2) Assuming that the 660 is useless to me, what GPU is better than my 7750, and is compatible with my motherboard?

    Hi,
    You didn't indicate that you had upgraded your power supply. You need a 500+ watt power supply to power the 660 watt.
    If you had already upgraded your power supply then it's possible that the NVIDIA 660 was flashed for UEFI mode. Your PC is running in legacy mode since you are running WIndows 7.  You can verify legacy mode is enabled in the bios. If this is the case then RMA the NVIDIA 660 back to the video card manufacturer and request that it be flashed or exchanged for a NVIDIA 660 that will run in non-UEFI mode (legacy mode).
    HP DV9700, t9300, Nvidia 8600, 4GB, Crucial C300 128GB SSD
    HP Photosmart Premium C309G, HP Photosmart 6520
    HP Touchpad, HP Chromebook 11
    Custom i7-4770k,Z-87, 8GB, Vertex 3 SSD, Samsung EVO SSD, Corsair HX650,GTX 760
    Custom i7-4790k,Z-97, 16GB, Vertex 3 SSD, Plextor M.2 SSD, Samsung EVO SSD, Corsair HX650, GTX 660TI
    Windows 7/8 UEFI/Legacy mode, MBR/GPT

  • How can I add music that I bought on my Mac to my PC laptop?

    TIA

    I usually use a jumpstick or a usb stick. Put all my music from the library and drag it into the stick. When I hook it up to the other computer I just plug it in open it and transfer it into my music file click on it and it'll save into itunes. That's just a easier for me. I'm sure there are other ways too

  • Can I add a PCI Express eSATA card to my G5

    Hi All,
    Not clear if this will work...I have a late 2005 model Power Mac G5. I'd like to add this eSATA PCI Express card: http://www.worldofcables.com/store/viewItem.asp?idproduct=9232
    So I can use this external drive with it's faster eSATA capability: http://www.macmall.com/p/Fantom-Drives-External-Hard-Drives/product~dpno~7819677 ~pdp.ffadahe?store=macmall&source=MWB23824
    It's not clear to me if my mac can accommodate this card...does anyone have more insight than me?
    Thanks in advance,
    Rick

    Greetings Everyone,
    I am a long time Mac User but I must confess I am not really a "power user" I use my mac to edit my gigs and thats about it. I have acquired a 6TB G-Raid External SATA drive with tons of footage and I need to be able to interface my G5 PPC to it. I need to add a ESATA card to my rig so I can get to that footage. Please, Please, Please help! If anyone can suggest a card that will work I would be so very happy! I would be happier still if it was affordable!
    "Help me Obi-Wan Kenobi...you're my only hope!"
    Here are my specs:
    OS X v 10.5.8
    Build # 9L31a
    Model Name: Power Mac G5
    Model Identifier: PowerMac7,3
    Processor Name: PowerPC G5 (2.2)
    Processor Speed: 1.8 GHz
    Number Of CPUs: 2
    L2 Cache (per CPU): 512 KB
    Memory: 4 GB
    Bus Speed: 900 MHz
    Boot ROM Version: 5.1.8f7

  • DIFFICULTY FINDING A HIDDEN CLEANER THAT WILL WORK WITH YOSEMITE

    I used to own an older Mac, a 2010 Mac to be exact with the disc drive in the side of the computer.  I downloaded HIDDEN CLEANER to get rid of junk files that showed up when I transferred music to my Sansa Clip +.  This Hidden Cleaner worked very well.  I now have a new 2015  Mac with Yosemite Operating System, and the old Hidden Cleaner will not work.  Can anyone recommend something that will work with my new Yosemite Operating System.  I have put over 1000 songs into this and would like to add about 500 more however, I am stuck.Please help.  Anyone. 

    For automated tools, I was only aware of Hidden Cleaner and KopyMac, the latter of which I believe disappeared a bunch of years back . . . .   Hopefully, some Mac folks will have other suggestions.

  • How can I create symlinks, that it can see users over FTP-.

    Hi,
    I have started FTP on my Mac OS X 10.8 Server. And I need now in the FTP folder to add (link) some other directories, that I need, that the people can reach.
    I try it via symlink, but the FTP doesn't see it. I can see it only over sFTP, but when I try to go to this directory, I have only errors "Can't access it". I try to set permissions too, but nothings helped.
    Please can anybody help me and tell me, how can I add links, that it's seen and accessible over FTP.
    Thanks.

    Better?  Safer?  Sure.  Don't use ftp.  Intercepting ftp traffic is trivial, which means you're basically posting your login credentials.  Who knows what will then gets transferred to the ftp server.
    In general, you're looking for the classic use of a dropbox; a classic lowercase-d dropbox, and not the cloud-based file-sharing service now known by that name.
    For folks that need access to specific folders, I'd set up a login that only has access to the target folder(s), and would then set up the dropbox folder to allow only write-only access for that login, and probably then with a folder action or a local service or a cron or launchd job that moves the arriving files somewhere else.
    Note that this appears more complex than you're probably considering with ftp not because of the use of sftp, but because allowing even remote ftp users read access into the dropbox cab lead to the same problems — exposed credentials meanthat  the other contents of the dropbox are exposed, and remote users can load all sorts of stuff into the dropbox.
    Here's a Google version of the dropbox and a Superuser discussion.  I don't know of a pre-packaged packaged ftp or sftp server or an available set-up script that provides the dropbox features off-hand, but I'd look for third-party clients such as Rumpus, and see if one of those has that feature.

  • I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!

    I've searched to no avail for this problem. Similar posts but none that tell me what to do. I can't add or delete any bookmarks on my iPad 2 running the newest iOS. I know how it's suppose to work, it just isn't working!
    It started after the major update to iOS 7.
    I can't believe that this is so hard to do. It's just not letting me. I can add a bookmark to the home screen just fine, just not in a bookmarks folder anywhere I try.
    I've used Apple products since 2001 and have always loved how intuitive they are. But the Safari browser since iOS 7 has been the worst I've experienced. At least right in the beginning after that update.
    I'd really appreciate any help that doesn't just tell me how it's suppose to work...I know that.
    My iPad 4 is not affected with the problem and works as it should.

    To delete, tap "Edit" (tap to enlarge image)

  • HT3387 When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    When I use pages the languages that I mainly use are English and Hebrew. The spellchecker works for English but not with Hebrew. How can I add another language to the spellcheck?

    http://m10lmac.blogspot.com/2011/06/extra-spell-checking-dictionaries-for.html

Maybe you are looking for