Jvc GR-HD1US HDV Mini DV Camcorder

anyone know if one can take a mini dv tape that has been shot on a jvc GR-HD1US HDV Mini DV Camcorder and import it into fcp with a sony hd camera?

Welcome to the forums.
Nope...two completely different versions of HDV. The JVC uses Long GOP while the Sony and Canon use Short GOP (or is it visa versa?). You will need to play that tape back on a JVC camera or deck.
Interestingly, the footage shot with a Canon HDV camera can be played back on a Sony HDV deck...but only if it was shot 60i. 24F is not supported. But that is neither here nor there for you.
Sorry man.
Shane

Similar Messages

  • Connecting a JVC GR-240 Mini DV camcorder to iMac

    Hello,
    I am completely new Mac user, having used recently decided to ditch my home Dell Pc in favour of a Mac. I have tried to connect my JVC GR-D240 mini DV camcorder to the iMac via the firewire port. Neither iMovie HD (which I downloaded) or iMovie08 seem to recognise the camera – the only source they allow is the build in iSight camera. The camcorder is placed in play mode, but nothing happens.
    I can connect the camera to my old Dell PC, record to avi and then copy this to the Mac, but this is not an ideal solution as I am getting rid of the PC soon.
    Any help would be appreciated.
    Thanks.
    PS – I have one of the new silver iMacs.

    Hi Philip,
    connect the cam, switch it on and start the System Profiler (About this Mac menu).
    Look into Hardware/Firewire, there you will see the firewire bus and your cam should be shown.
    If this is not the case, then there might be something wrong with your installation or your mac.
    You could also download the Firewire SDK from http://developer.apple.com/sdk/
    There you will find the AVCBrowser in the applications folder of the SDK. I don't know but it might be possible that you also have to install xcode, which you will find on your DVDs shipped with the mac. Connect the cam, start AVCBrowser and you cam should be shown. In the Browser you can check a lot of thinks on the cam.
    I had only one problem with a Sony with dead fw-port, but as yours still works with the Dell it seems to be somethink on the mac side.
    Try repair permissons and have a look into /var/log/system.log, if you find anything about firewire there post it.

  • Questions about a JVC mini dv camcorder

    Hello, I have a JVC Mini DV Camcorder. The model # is GR-D370U. It has a firewire and USB port. I want to be able to download video onto my computer to work with in Imovie. I do not have any of the software that came with the camera. I own a USB cord for the camera. Is there a way to just use this cable and avoid the firewire? Also what program can I use to download the video because when I connect the camera with the USB cord and turn it on nothing happens. Thanks for your help.

    Hi (ciao) Brackh amd welcome to the forums!
    I do not have any of the software that came with the camera.
    You don't need any.
    I own a USB cord for the camera. Is there a way to just use this cable and avoid the firewire?
    No, iMovie will only import via firewire.
    Also what program can I use to download the video because when I connect the camera with the USB cord and turn it on nothing happens
    That's because you are trying to use USB!
    You use iMovie to import the video from the camera (via firewire!) and to edit the movie, then iDVD to make the DVD.

  • Sony Mini-DVD Camcorder

    I recently bought a mac book pro and I have final cut express. I am trying to hook up my sony mini dvd camcorder to my computer so that I can capture my footage off of my camcorder to make movies. Any suggestion would be helpful. Thanks

    "No matter how competent FC / FCE is, it is still a very small minority with respect to the numer of professionals actually using it. Adobe might be counting on gaining market share by being able to announce AVCHD support before Apple, and given that the majority of users out there do not use FC/FCE and that more an more Mac users are new users / switchers, it might not be such a bad plan if Apple is typical Apple and slow to adopt new technology (but getting it mostly right when they finally do move)."
    I'm not quite sure what some of this means, and I think much of it is quite wrong. If, by the first sentence, you mean that only a small minority of professionals use Final Cut. This is quite inaccurate. It is by far the most widely used video editing software on the planet. Far exceeding Avid, Media 100, Premiere or any other available software. Avid is strongly entrenched in film production and primetime television, but that accounts for a minute proportion of all video production worldwide. I would also disagree that Apple is slow to support new technology. Apple was the first software with professional DV editing, native HDV editing, DVCPRO 50 and DVCPRO HD via FireWire, the first to support DVX 24p and 24pa, and while it might have have been the first to support IMX and XDCAM, it wasn't far behind. It was slow to support native JVC HDV 720p editing, but that's about the only area in which it was not a leader, and it only happened because Apple wanted to edit the material natively as it did Sony 1080i, coupled with the Intel issue. AVCHD is very new technology, and its use of delivery format, 15 frame GOP-based compression for acquisition presents huge issues for any editing applications. Not something that can be turned around in a couple of weeks or even months. One thing that has greatly slowed down the development of video editing application interface functionality over the last few years has been the constant stream of ever-changing formats introduced by camera manufacturers. This has meant that less and less time has been available to actually work on the software. In Apple's case this has been further complicated by the move to Intel-based hardware, and the necessity to port all its software to a new architecture. This has not slowed Apple's development and support for new formats, but it has greatly delayed feature enhancements, in my view. Personally I feel, at this stage, it would be better for the pro apps to work on core issues and enhancements rather than continue development for yet another format, particularly a problematic consumer format. Panasonic is developing a professional format AVCHD Intra that might be supported on the pro apps before the consumer version.

  • What's a great, affordable Mini-DV camcorder to buy for Final Cut?

    I just got a MacBook Pro and Final Cut Express. What's a great Mini-DV camcorder to buy if I was to get my feet wet with video editing? I've just graduated from film school, looking to make short films and short documentaries. Does anyone know what a good entry level camera would be and what type of equipment I'd need? Thank you so much, I'm on my own in this so any help I could get would be great!

    hey there RohanRuin, welcome to Discussions!
    what you get should be determined by your needs/project & your budget... if you just completed film school don't you have some idea of the features & capabilities of cameras & other tools necessary to shoot clean usable footage. anyway.... any prosumer Sony, Panasonic or Canon will be a good buy as they have manual controls as well as automatic, they also have features being left out on lo-$$ consumer cams, such as mic in, headphones out, analog to digital conversion. JVC & Canon HDV cams have interchangeable lenses.
    a solid tripod that works w/ your cam(size & weight), lights & stands-will it be "guerilla" lighting that you cobble together from your local Home Depot, or will you buy Lowell instruments in a 3-5 piece kit? ....softboxes? you'll need/acquire all sorts of stuff as you progress in your career. i still have/use a few of the reflector shop lights i got when i began 25 years ago to shoot small projects 'cause that's what i could spend. also think about some sort of external mic-ing so as not to record cam noise. there's more but i think you need to assess your needs & budget first.
    i use Sony mini DV & HDV cams, & depending on the project, a compact audio mixer, Shure & CAD mics. iighting instruments w/ barndoors & gels, foamcore reflectors, a couple of battery-powered on cam lights. a cheap lav that works for interviews,... get the most cam that you can (3-chip over one-chip) so you can continue to use it for a few years, a good lav mic if you'll need it or a good stick mic, boom & stand, maybe a couple of halogen shoplights are my starter suggestions.
    good luck.

  • Trouble importing HDV mini DV footage from my Sony HVR Z7U into FCP 6.0.6

    Cannot import HDV mini DV footage from my HVR Z7U camcorder into Final Cut Pro
    I can Import the footage as an NTSC 720x480 signal.
    One consistent answer is to make sure that in camcorders menu settings that the IN/OUT REC - iLINK SET is set to off.
    No Luck, no communication with FCP in that mode.
    That being said when cameras ilink is on I can import 740/480 NTSC video, not HDV.
    Here’s where I’m at now
    The video was shot in 1080i 30p onmini DV.  With my Sony HVR Z7U Ican only import the video into FCP as a NTSC 720x480 signal. It looks great butnot in HDV?
    I believe I have tried most every setting in my FCP audio video settings to import the HD footage into FCP. FCPseems to only recognize the camcorder in the NTSC mode.
    Example - In  FCP  Audio /Video Settings
    Sequence Preset - HDV 108030p
    Capture Preset    - HDV
    Device Control     - HDV FireWire Basic
    Video Playback   - Only gives none or NTSC choices(I chose Apple FireWire)
    With the setting above and Sony’s  ilink off- window alert reads…
    “Device is not connected or the capture preset is not set up correctly. You may still log offline clips. This might also happen if you play DV footage in an HDV device.” The camcorder viewer reads the digital footage as 1080i 30p. So it’s not shot in DV footage.
    With the iLink on - I get the same window alert.  Unless I capture in NTSC
    For me FCP will only log and capture the footage when the Capture and Device Control Presets are set to a NTSC format and the camcorder ilink is on. Hence an NTSC 720x480 signal is imported. Not HDV?
    Come on, I know this a common problem and I must be missing something very simple. Please Help! Many thanks.
    Gary Boland
    FCP 6.0.6
    Mac G5
    Someone mentioned using log and transfer. I use this with all my Compact Flash HD videos. I have found no info for importing HDV from mini DV in log and transfer with a (my) camcorder.

    Gary, this is the Final Cut Pro X forum.  You might try the other forum for FCP. Still, I have the Z5U Sony which is nearly identical to your camera except for the zoom as I recall.  I think we have the same menu system.  I see to recall there is a menu option that sets the output file format.  Also you can set it to record in SD as well as I recall.  I read my files in from tape to FCP X easily ... in high def.  Best wishes.
    stephen

  • Help me choose a mini dv camcorder

    I've been trying to decide between the Kodak Zi6 and the Canon ZR900. I've never used a camcorder before but want to be able to edit frame by frame I have a brand new iMac and am enrolled in the one to one program so I will be able to learn how to use iMovie. The canon costs $100 more.
    Any thoughts?

    If you are looking specifically at mini-DV camcorders, you will see that individual makes / models are not listed on the "iMovie '09 Camcorder Support" page.
    There is only the generic statement:
    "+iMovie '09 works with most Mini DV tape-based camcorders that use a FireWire cable (also known as IEEE 1394 or i.Link) to transfer data. iMovie works with DV (standard definition) or HDV (high definition) formats.+"
    So, it sounds to me like you better get one with a Firewire port, and then take a gamble that it will work with iMovie '09. Perhaps a thorough web-search can answer the question.
    I am fairly sure I will be buying iLife '09 soon. My Canon Elura 100 (mini-DV) camcorder works flawlessly with iMovie HD ('06), so I have my fingers crossed regarding '09.

  • Premiere CS5 (win7 x64) won't recognize my Mini-DV camcorder.

    I have Premiere Pro CS5 installed on a Windows 7  64-bit system.
    When I try to Capture, I keep getting the error message:  "Can't Activate Recorder. Try Resetting Camera."
    the whole set-up worked fine on my XP system with Premiere Pro 1.5.
    Extra info:
    The Mini-DV camcorder is a Panasonic NV-DS33   (but personally I think it has nothing to do with my camera because I have seen so many threads online regarding this issue and no-one has any decent answer!)
    the firewire cable is fine because it works on my old XP computer.
    in premiere, if I change the camera to an HDV, then suddenly I can CONTROL the camera, but I can't capture)
    Windows 7 (x64 bit) recognizes the Camcorder in the Device Manager (and says it is working properly).
    I have tried several other DV capturing softwares (Stoik, Scenalyzer, WinDv). I have even tried my old Premiere Pro 1.5 on my 64-bit system.. and NONE OF IT WILL CAPTURE MY CAMCORDER!
    This is very frustrating. I need my new win7 (x64) Premiere CS5 to capture successfully. I have spent a LOT of money on this new system. What on earth is the problem?
    (i saw one thread on a similar issue regarding a 32-bit installation of Win 7, and it is marked as ANSWERED! but in my opinion, (from the amount of forums on many other sites) this issue is definitely not fixed.
    is there any update to Premiere CS5? or a workaround? or anything else I should know?
    PS: it is not an option for me to keep using my old computer to Capture video and then transfer it to my new system. i am passing my old system on to another person.
    many thanks
    Marc
    [email protected]

    I agree that the "Legacy" FW driver solution should be a stickie, or FAQ. Since Win7-64 was released, it has caused no end to the grief. Maybe Jeff, or Todd will have a better solution to getting the word out.
    It was Harm Millaard, who brought that to MY attention, and he's posted it to many, many threads. In nearly every case, it's solved the issue.
    Good luck, and thanks for reporting Colin's success,
    Hunt
    PS - per your suggestion, I just published this "fix" in the Tips & Tricks sub-forum for PrElements.

  • Importing to imac from JVC SR-VC30U Combo min DV/SVHS deck by Firewire

    One step DVD would not work, but one should be able to play either min DV tape or SVHS tape in the $826 JVC SR-VC30U Combo mini DV/SVHS Deck and, via its Firewire, capture a DV video file into the imac, correct? (How is that done--does image capture recognize that a Firewire input is present, and give you options to start/stop capture?)Now, the combo unit output most likely is a 4 pin Firewire (IEEE 1394), and I think one can get a 4to6 pin adapter cord, as the imac is 6 pin Firewire, right?
    Good source for such a connector?
    I'll be mastering video to 90/60 min. min-dv tapes recorded in both a camcorder and the SR-VC30U, and would rather use the deck rather than my camcorder as the playback unit to save wear on the camcorder. I also have numerous video tapes, VHS and SVHS, that I like to get into my imac as dv. I can also back up the min-DV mastering of events with a SVHS tape, and import that SVHS footage if the min-DV recording fails. Might even be a way to get better footage from DVDs, by looping through playback, than trying to rip from the recorded DVD.
    One might even be able to loop through video and capture dv to the imac--checking with JVC about that and related questions--will report back...
    Regards, Dale

    JVC never answered my email questions. iapps confirmed that my basic assumptions were reasonable, however. So I ordered the items.
    I have received and worked with the JVC SR-VC30U Combo DV/SVHS deck and it appears to be a versatile unit. You can dub from one format to the other, record input to both formats, play either format and have DV/Firewire output, and loop through input to digitize analog video for Firewire input into the imac. Haven't tried recording DV in to both formats yet.
    Looping through playback from a recorded DVD, capturing, imovie, idvd, to burned DVD looked much better than ripping the original DVD with Cinematize and doing the same.
    You have to control the deck manually--imovie will not control the functions (play, rewind, stop, etc) as you have with most DV camcorders, of course.
    I've also found the Panasonic PV-GS500 to be compatible with imovie. You have to have it in playback mode, not PC mode. Also, there was some flicker in footage ran through imovie/idvd to burned DVD, particularly in transitions were there was movement in the video at time of transition. Some of that may have been related to stabilization so I've turned that off to see if it helps.
    Dale

  • Looking for a GREAT mini DVD Camcorder that is compatible with my MAC! :-)

    Ok. Here it is: I have a Sony DCR-TRV350 Camcorder, which I LOVE. However, the DVI port on the camera is screwed up. I bought a new DVI firewire, alas, to no avail. I cannot get the information from the camera to my Mac. So, making my fun, goofy movies is being inhibited by a fix, that will cost nearly as much as a new camera. I am looking for a new camera, that takes advantage of the firewire port on the Mac. Any suggestions? I would prefer a Sony. I am looking for advice from someone who knows, better then I, (that should be easy) of a good camcorder (miniDVD?) that works well with a Mac. I just want to have fun, bringing in footage to iMovie HD, editing, and posting them to Metacafe. Any and all input is, of course greatly appreciated. Thanks so much!!
    ~ George

    "..I wish Apple would tell me "why" a standard MiniDVD camcorder would not be compatible with I-Movie, because I can not think of a single logical reason.."
    iMovie was designed to work with "DV" digital camcorders. These were, and are, camcorders which record video in a particular method onto DV, or miniDV, tape. iMovie wasn't designed to import or edit analogue 8mm or Hi-8 recordings, so it won't. iMovie can't handle an incoming analogue (non-digital) signal. (..But if you put one of those 8mm or Hi-8 analogue tapes in a Digital-8 camcorder such as the Sony DCR-TRV350, mentioned in the very first post, above, you can then import it as a digital signal through the camcorder's FireWire connection..)
    Various other digital recording methods came and went, and Apple have supported some, but not others: there was the short-lived Sony "microMV" tape format which Apple didn't support, although you can handle that with MPEG Streamclip. Then there was HDV, which Apple does support ..but they did that by creating an Apple Intermediate Codec, into which the MPEG-2 video format of HDV tape gets converted during import.
    Then there were various MPEG-2 DVD video formats, and the various movie formats used by solid-state memory-chip camcorders. Now there's AVCHD format, for memory chips, hard drives and DVDs.
    These methods of recording video just keep multiplying - because the camcorder manufacturers want to offer "Look! Ours-does-it-better!" claims. But just because they produce a camcorder which records video, that doesn't mean that Apple (which doesn't make camcorders) has to provide a means to edit all these weird formats which keep springing up. Surely, the camcorder manufacturers should be providing Mac-compatible, or iMovie-compatible, editing methods for their devices, shouldn't they?
    As Thomas mentions, there's a list of some compatible camcorders (see above) ..but that's a list of camcorders which are compatible with the latest iMovie '08 (..which can deal with some DVD camcorders, but not those which record DVDs in AVCHD format..) and AVCHD format can be handled only by Intel-based Macs, anyway.
    So for an MPEG-2-based mini-DVD camcorder and iMovie HD 6, copy the files into your Mac, and then use MPEG Streamclip to convert them to iMovie HD 6 compatibility.
    For iMovie '08, some miniDVD camcorders are compatible (those using MPEG-2 recording). For DVD camcorders using AVCHD recording, you may have to copy the recordings onto your Mac, and then download and use "Voltaic" to convert the recordings into iMovie-editable format.
    "..I can not think of a single logical reason.." ..the reason is that manufacturers just want you to buy these cameras. But they don't give a hoot that you can't edit the material they record, and so it's left to Apple, and other software developers, to try to devise some way to "unravel" the compressed recordings for you, and make them editable.

  • What mini dv camcorder?

    I need some help. I have a Panasonic NV-EX3 mini dv camcorder but it is not recognised by my imovie hd 06. Does anyone know of a list of all the mini dv camcorders that are compatible with said version of imovie or can recommend a mini dv camcorder they know works. Thanks.

    This is my list on the topic.
    *NO CAMERA or A/D-box*
    Cable
    • Sure that You use the FireWire - USB will not work for miniDV tape Cameras
    FireWire - Sure not using the accompany USB-Cable but bought a 4-pin to 6-pin FW one ?
    • Test another FW-Cable very often the problem maker.
    Camera
    • Test Your Camera on another Mac so that DV-in still works OK
    • Toogle in iMovie pref. Play-back via Camera (on<->off some times)
    • Some Cameras has a Menu where You must select DV-out to get it to work
    • Camera connected to "charger" (mains adaptor) - not just on battery
    Does Your Camera work on another Mac ?
    Sorry to say it is to easy to turn the 6-pin end of the FW-cable 180 deg wrong.
    This is lethal to the A/D-chip in the Camera = needs an expensive repair.
    (Hard to find out - else than import/export to another Mac ceased to work
    everything else is OK eg recording and playback to TV)
    Connections
    • Daisy Chaining most often doesn’t work (some unique cases - it’s the only way that work (some Canon Cameras ?))
    Try to avoid connecting Camera <--> external HD <--> Mac but import directly to the Mac then move
    the Movie project to dedicated external hard disk.
    • FireWire-port - Can be re-setted by - Turn off Mac and disconnecting Mac from Mains/Power for 20-30 minutes
    Mac
    • Free space on internal (start-up) hard disk ? Please specify the amount of free space.
    (Other hard disks don't count)
    I go for a minmum of 25Gb free space for 4x3 SD Video - and my guess is 5 times more for 16x9 HD ones
    after material is imported and edited.
    SoftWare
    • Delete iMovie pref file may help sometimes. I rather start a new account, log into this and have a re-try.
    • Any strange Plug-ins into QuickTime as Perian etc ? Remove and try again.
    • FileVault is off ? (hopefully)
    Using WHAT versions ? .
    • Mac OS - X.5.4 ?
    • QuickTime version ? (This is the heart in both iMovie and FinalCut)
    • iMovie 8 (7.1.?) ?
    • iMovie HD 6 (6.0.4/3) ?
    *Other ways to import Your miniDV tape*
    • Use another Camera. There where tape play-back stations from SONY
    but they costed about 2-4 times a normal miniDV Camera.
    • If Your Camera works on another Mac. Make an iMovie movie project here and move it
    over to Your Mac via an external hard disk.
    (HAS TO BE Mac OS Extended formatted - USB/DOS/FAT32/Mac OS Exchange WILL NOT DO)
    (Should be a FireWire one - USB/USB2 performs badly)
    from LKN 1935.
    Hi Bengt W, I tried it all, but nothing worked. Your answer has been helpfull insofar as all the different trials led to the conclusion that there was something wrong with my iMovie software. I therefore threw everything away and reinstalled iMovie from the HD. After that the exportation of DV videos (there has not been any problem with HDV videos) to my Sony camcorders worked properly as it did before. Thank you. LKN 1935
    from Karsten.
    in addition to Bengt's excellent '9 yards of advice' ..
    camera set to 'Play' , not rec/computer/etc.?
    camera not on battery, but power-line?
    did your Mac 'recognize' this camera before...?
    a technical check.
    connect camera, on, playback, fw-connected...
    click on the Blue Apple, upper left of your screen ..
    choose 'About../More..
    under Firewire.. what do you read..?
    More
    • FileVault - Secure that it’s turned off
    • Network storage - DOESN’T WORK
    • Where did You store/capture/import Your project ?
    External USB hard disk = Bad Choise / FireWire = Good
    If so it has to be Mac OS Extended formatted
    ----> UNIX/DOS/FAT32/Mac OS Exchange is NOT Working for VIDEO !
    mbolander
    Thanks for all your suggestions. What I learned is that I had a software problem. I had something called "Nikon Transfer" on my Mac that was recognizing my Canon camcorder as a still camera and was preventing iMovie from working properly. After uninstalling Nikon Transfer and doing a reboot, everything worked great.
    I never liked the Nikon Transfer software anyway--I guess I'll get a cheap card reader and use that to transfer photos in the future.
    *No Camera or bad import*
    • USB hard disk
    • Network storage
    • File Vault is on
    jiggaman15dg wrote
    if you have adobe cs3 or 4 and have the adobe bridge on close that
    or no firewire will work
    see if that halps
    DJ1249 wrote
    The problem was the external backup hard drive that is connected, you need to disconect the external drive before the mac can see the video camera.
    Yours Bengt W

  • How to connect my mini-dv camcorder to new imac with no firewire

    I have a Sony Mini-DV camcorder (Handycam) and used to connect it via firewire to my last iMac.
    My new iMac doesn't have firewire - just thunderbolt & usb.
    Is there a way I can use this camcorder on my new iMac? Are there adaptors, etc.?
    Thanks.

    As far as I know, all recent iMacs still have a firewire 800 port.
    So you would need a firewire 400 to 800 adapter.
    21.5" and 27" iMacs ports
    One model here:
    http://www.sonnettech.com/product/fw_adapter.html

  • Connecting MacBook to Samsung Mini DV Camcorder

    I have a MacBook and I would like to get my videos from a samsung mini DV camcorder. How can I do this?  I don't have firewire port on MacBook.  I tried buying a firewire with USB end and it does not work.  Please help.

    Sadly you need a MacBook that has Firewire.  USB 2 camcorders exist, but all of them compress video before sending it via USB.  The newest MacBook Airs and Pros are compatible with Thunderbolt which can be converted to USB 3 which doesn't have the capacity of bandwidth issue, but can interfere with WiFi.   Firewire and Thunderbolt are far better standards to deal with.  
    And there is no way to directly convert a Firewire to USB signal or vice versa.
    If your mini-DV camcorder records to media directly on the Camcorder such as mini-DV discs. http://www.macsales.com/ offers tray loading DVD drives that may be able to read those discs.

  • I captured from mini-dv camcorder to FCP7 using control from my computer and firewire. I cannot find the file or clips I transferred anywhere except for in Finder. How do I get the clips from Finder to FCP7. Also I did not see audio on the computer meters

    I captured from mini-dv camcorder to FCP7 using control from my computer. I only find the capture clip in Finder. How do I get the clip in Finder to FCP7.
    Also my audio in the capture was not showing up on my audio meters on my computer-is this normal. Thanks

    you will not see the audio meters from within fcp move while capturing. 
    If you only see the captured clip in the finder, not within fcp, there's something wrong.  You might try deleting your fcp preferences
    https://discussions.apple.com/docs/DOC-2491

  • Mini-DV Camcorder V. DVD Camcorder?!

    I want to buy a camcorder but I'm not sure if it should be a Mini-DV Camcorder or a DVD Camcorder. What would be most compatible with iLife 04 and my computer in general, (statistics below).
    I have two in mind: Sony Mini-DV DCRHC24E and the Sony DVD105.

    iMovie likes to take take video from the device via iLink (Sony speak) or Firewire (Apple speak). The DCR-DVD105 doesn't have iLink/Firewire so to use that you'd have to insert the DVD in to the iMac and then import to iMovie (you may have to perform some conversion too depending on the format Sony are using). 
    Should you move up to a new iMac with a slot-loading disk drive the camcorder would become useless as you can't put an 8cm disk in the new iMacs.
    Of course the disadvantages of the DCR-HC24E MiniDV version is that tapes of course need re-winding etc. Note that the MiniDV version doesn't have DV in which means you can't archive projects back to tape. I'd advise looking for a model with DVin and DVOut.
    You might wish to post in the iMovie forum too as the users there may have further experience.
    regards
    mrtotes

Maybe you are looking for