K1 IdeaPad - Please help me with that ICS by Lenovo w/o gaaps

Hello everybody,
I am new here - frankly I registered becasue of many many hours of trying to restore gaaps to this tablet (which I just got brand new).
First of all what I did was not to read interenet and updated to Lenovo official ICS update. Then I realised that it lacks gaaps.
Anyway I went througt all topic on every forum I could possibly find.
My problem with this tablet is as follows:
When I connect my tablet in APX mode to PC (drivers installed properly and working) I run flash-win.bat on any ROM downloaded (tried all of them) I get this:
rcm version 0x4
command send failed
And after this tablet dissappears in PC. When I try to run flash-win.bat again I only get "device not found". When I turn off and turn on my tablet again in APX mode - same thing happens again and again and again.
What I want is to bring back gaaps back to this tablet but apparently I cannot change my ROM version to any. I installed SDK and tried ADB SHELL but anytime I try anything on ADB I always get "no devices found".
What I found on a different forum concerning different tablet which had exactly same problem they said it's because I didn't delete recovery-from-boot.p from /system and it's reflashing stock recovery whenever you boot into android.
Because I have no knowledge about android I do not know whether that is the case. Anyway I tried to access /system by ADB SHELL but as I wrote before I cannot.
Please help me. If you need any data, printscreens, more info about what I did or did not do please write me on [email protected] or this forum. Please use "small" words concerning android as I am a complete newbe.
Thanks,
Maciek

aksarben wrote:
Advice:
1. Use a meaningful subject line. A vague "Help Me" almost guarantees that many people will not bother to read the post.
2. Use the proper tags to format the code. Very few people will read unformatted code (and I'm not one of them).3. Ask a real question. I had to ask twice to get anything of the sort out of you.
4. Provide any error messages, exceptions,etc.

Similar Messages

Hi guys. I want to pair my iTouch 4g to Samsung gravity Bluetooth. Both my iPod and the phone find each other but both say: unsuccessful in connecting to device. Can u please help me with that. Thanks.

Please help me. I really need help. Also, an additional question:
Can I get free wifi on my iPod touch fourth gen. ANYWHERE.
I need it to call people cuz I don't have a phone yet. Please help. Thanks.

You cannot pair your iPod to a cell phone, so forget about it.
The only way you can get free WiFi is to hang out at a Denny's, a Starbucks, or a truck stop, and I don't think your parents would approve....

Please help me with that SQL

I'm porting data to an Oracle 9i datatabase.
One of my tables named MOUVEMENTS has, among other colums, the columns
ADMIS (an ID), Date_Of_Mouvememt, Hour_Of_Mouvement
If I try to add a primary key
Alter table MOUVEMENTS
add constraint PK_MOUVEMTS_BY_ADM_DTE_HR primary key (ADMIS,DATE_OF_MOUVEMENT, HOUR_OF_MOUVMENT)
I get
ORA-02437: cannot validate (BD01GH.PK_MOUVEMTS_BY_ADM_DTE_HR) - primary key violated
This happens because a few rows for the same ADMIS have the same date and hour and that should'nt be. I can't figure out the right Select to find out all the offending rows.
I've tried the following :
Select Admis, Date_of_mouvement, Count(Hour_of_Mouvement), Min(Hour_of_mouvement), Max(Hour_of_Mouvement)
from Mouvements
group by Admis, Date_Of_Mouvement
having count(Hour_Of_Mouvement) > 1
and min(Hour_Of_Mouvement) = max(Hour_Of_Mouvement)
but I dont get all the offending rows.
Above that, this SELECT does'nt returns me a full row. If I modify the above Select to return just the ADMIS column and use it as a sub-select for
Select * from Mouvements Admin in (Select Admis....)
I get an extraneous bunch of rows that dont violate the primary key, since one ADMIS may have many row and not all of them have their date and time the same.
Thanks for your help
Daniel

It sounds nice but, in my opinion, not the best approach since the combination of (ADMIS,DATE_OF_MOUVEMENT,HOUR_OF_MOUVEMNT) that I intented to use as the primary key is a business rule that I can't ignore.
Obvously the old system was'nt working properly and having such a constraint ensures that the new one won't do the same mistake. After examinig the data, the old system made the mistake when the patient was admitted then, almost immediatly, transfered to the intensive care unit.
In the real world, the orginal bed is simply reserved. But there is a real time delay between those two mouvements and the system should reflect it. So, if each mouvement has a unique timestamp, there is no need for another key since ADMIS is already a unique identifier (the hospitalization ID that is generated by a SEQUENCE). Once all the old data will be imported properly, the DATE_OF_MOUVMENT and HOUR columns will be joined into a single timestamp column reducing the primary key to a composite key of only 2 columns saving the extra index that your suggestion would require.
Regards,
Daniel

Ibooks for ipod 4g was deleted and new version of it was unable to sync. so please can you help me with that?

On my apple ipod 4g (ios 6.1.6) ibooks was deleted and new version of it was unable to sync on my pod. Can please help me with that?

Try going to the Purchased tab in the App Store app on your iPod and you should be able to redownload an older compatible version of the app from there - you won't be able to do it from your computer's iTunes, you can only download the current version of an app on there, it is only directly on a device that you can potentially redownload an older compatible version.

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks

Please help me with the step by step instructions on how to install a Windows server 2008 on a computer that has Windows 8 installed on it without formatting windows 8.Please email the steps , Thanks
Assuming your rig can support virtual machines, you can use Hyper-V and run another OS there.
Better practice however is to use a dedicated machine and use remote desktop to the server.
Corsair Carbide 300R with window
Corsair TX850V2 70A@12V
Asus M5A99FX PRO R2.0 CFX/SLI
AMD Phenom II 965 C3 Black Edition @ 4.0 GHz
G.SKILL RipjawsX DDR3-2133 8 GB
EVGA GTX 6600 Ti FTW Signature 2(Gk104 Kepler)
Asus PA238QR IPS LED HDMI DP 1080p
ST2000DM001 & Windows 8.1 Enterprise x64
Microsoft Wireless Desktop 2000
Wacom Bamboo CHT470M
Place your rig specifics into your signature like I have, makes it 100x easier to understand!
Hardcore Games Legendary is the Only Way to Play!

HT1338 Could you please help me with the problem. I have mac os 10.7.4 on my macbook pro retina and want to update it to 10.7.5. I had been waiting for 2 hours to do it, but then it appeared that it was impossible. What should I do?

Could you please help me with the problem. I have macbook with retina with mac os 10.7.4 ann want to update it to mac os 10.7.5. I had been waiting for 2 hours to do it and had tried 3 times but it appeared that it was impossible. What should I do?

You can download the standalone updates:
OS X Lion Update 10.7.5 (Client Combo)
OS X Lion 10.7.5 Supplemental Update

I need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

i need make mac browsers with windows compatibility, because if i try to se priview from Dw to all browsers on windows PC it will look fine, but same file i trying to see on mac all browsers it will not showing proper..... Please help me for that.

ASk in the DW firum and be much more specific. Web page rendering issues are specific to specific versions of browsers and you may simply be using some bad code that messes up your page.
Mylenium

HT5622 hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem!

hey! i have a serious problem coming up which is that i am asked to enter my billing info even for free apps. why should i pay for apps which are free? please help me with this problem! and in the billing info there is pop-up box saying i have accessed my account from didfferent computer but no i have been doing it from the same pc. please help me out.

Tap Settings > General > International. Make sure the Region Format is correct.
As for your Apple ID. Tap Settings > Store > Apple ID > iForgot
Resetting your Apple ID may help.
Congrats on your new iPad !!!

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

PLEASE HELP ME. Some important emails have gone to an archive mail box and i really need them. Can someone please help me with how to view the archive email box and the emails that are in there?

http://kb.mozillazine.org/Recovering_deleted_mail_accounts

I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying

I have a red vertical line on the right side of my screen and it will not go away tried restarting my computer and that didn't help at all, please help me with this problem it is kind of annoying

If it's a thin 1 pixel wide vertical line it's highly likely it could be caused by a defective LCD.
One quick basic way to check is to note the position of the line. Then go to System Preferences, Displays, and lower the resolution. If ther line moves it's on the video and the logic board or video card if fitted is likely to be defective. If the line stays in the same position it's likely to be an LCD fault. Either way to have it repaired you'll need to visit an Apple store or AASP.
The worst offender for this problem is the Late 2006 17" iMac. FOC replacement of the LCD used to be covered by a quality program, but it's now ended.
Steve

My Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

my Iphone 4 is changing screens without me touching it. I will be in a msg and it will jump out of that msg and into another one... can anyone please help me with what this could be?

Try the basics from the manual.
restart.
reset.
restore.
iPhone User Guide (For iOS 4.2 and 4.3 Software)

My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...

My iPhone stolen and I download find my iPhone on it also I can sea it online but I can't locate it so please help me .. What should I do . I heard apple support can activate the GBS and send it to my e_mail . So I hope they can help me with that ...
Best wishes ..
<Email Edited by Host>

These are user-to-user forums, I've asked the hosts to remove your email address from your post.
Apple and/or iTunes support can't locate it for you, only you can potentially locate it via http://icloud.com on a computer or Find My iPhone / Find My iPad on another device - but that will only work if it's connected to a network and the device hasn't already been wiped and/or Find My iPhone disabled on it.
If it was stolen then you should report it to the police. You should also change your iTunes account password, your email account passwords, and any passwords that you'd stored on websites/emails/notes etc.

HT201487 i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

i have a problem with xcode programming app when i lunch to it it asking me to enter my password and when i enter it the program show that it is wrong but am 100% sure it's wright so please help me with this issue thanks

That's not very intuitive
Check your mail server setup (mail>preferences>accounts>) choose your MobileMe account and select Outgoing Mail Server (SMTP) dropdown box, select Edit SMTP server list, verify that each instance of the me server has a password, if there are more than one and you only have one account then delete the one without a password.

TS3700 I am facing this issues that music stops playing when the display goes...Please help me with this...:)

I am facing this issues that music stops playing when the display goes...Please help me with this...:)

Did you see the article linked at the top of this page?
iPod nano (6th generation): Music stops when display turns off
B-rock

HT6058 good morning.please help me with my iphone 5.i already downloaded iOS7 in my software update.but eventhough i have internet connection,verifying update said that i have no internet connection.what should i do?

good morning.please help me with my iphone 5.i already downloaded iOS7 in my software update.but eventhough i have internet connection,verifying update said that i have no internet connection.what should i do?

i try to reset my iphone but still the reply pf verifying update still the same.update failed because im no longer connected to internet.but i have full signal strength of internet.what should i try to do?

K1 IdeaPad - Please help me with that ICS by Lenovo w/o gaaps

Similar Messages

Maybe you are looking for